Slogging wrenches Open ended impact slogging wrenches. Stock Size Length Width Height Price No mm mm mm mm 902024 24 178 14.5 2.4 22.50 902027 27 180 15.5 25.2 22.50 90200 0 190 16.2 0.0 27.50 90202 2 190 16.7 0.5 28.50 90206 6 214 17.0 5.0 6.90 90208 8 215 17. 7.0 41.90 902041 41 2 19.2 9. 4.50 902046 46 252 20.4 44.2 55.50 902050 50 275 21. 48.0 65.50 Ring type impact slogging wrenches. Stock Size Length Width Thickness Price No. mm mm mm mm 90024 24 162 42.8 14.7 22.50 90027 27 180 45.2 15.4 24.50 9000 0 190 50.6 16.2 28.50 9002 2 190 5.7 16.4 0.90 9006 6 205 58. 17.9 5.50 9008 8 229 6.7 19.9 41.50 90041 41 20 6.9 19.9 4.50 90046 46 240 7.5 21.8 56.50 90050 50 255 78.5 2.2 59.50 Double Flex Wrenches 6 piece double flex wrench set, with different size 12 point sockets at each end. Satin finish. Chrome vanadium. TT6506 Double flex wrenches 6 metric double flex wrenches (265x142x50mm, 1.57 kilos) 8x9mm, 10x11mm, 12x1mm, 14x15mm, 16x17mm, 18x19mm TT6506 120.0 A wall rack with 6 double flex wrenches. Chrome vanadium. Satin Finish. For fixing on the wall or on a work bench panel. Sizes mm 8x9, 10x11, 12x1, 14x15, 16x17, 18x19mm Pieces 6 WRDF06 15.20 4
Double flex wrenches Double flex wrenches, with different sizes 12 point sockets at each end. Chrome vanadium. Satin finish. Stock Size L D1 D2 W T Weight Price No. mm mm mm mm mm mm g 650809 8x9 192 12.2 1.5 10.0 4.6 95 18.10 651011 10x11 200 15.5 16.9 10.0 4.6 105 19.90 65121 12x1 21 14.5 18.2 12.5 5.0 180 2.10 651415 14X15 24 20.5 21.7 14.0 5.8 215 25.0 651617 16X17 275 2.0 24.2 15.0 6.5 00 27.80 651819 18X19 284 25.5 26.7 16.0 7.5 82 0.60 Stock Size L D1 D2 W T Weight Price No. af mm mm mm mm mm g 611214 /8 x 7 /16 200 15.5 16.9 10.0 4.6 105 18.90 611618 1 /2 x 9 /16 218 18.2 19.2 12.5 5.0 150 2.80 612022 5 /8 x 11 /16 275 2.0 24.2 14.0 6.5 00 27.80 Bi-Flex wrench with 1 /4 bit socket at one end of the wrench and with 1 /4 drive at the other end. Chrome vanadium. Satin finish. Stock Size L D1 D2 W T Weight Price No. af mm mm mm mm mm g 691406 1 /4 hex x 1 /4 M 196 14.5 14.5 10.0 4.6 102 2.70 Flare Nut Wrench Range Double Flare Nut Wrenches with different openings at each end. DIN 118. Chrome vandium. Satin Finish. 15 offset ends for easier access, higher torque and for use on damaged nuts. Stock no. Size L H D1 D2 C1 C2 T Weight Price mm mm mm mm mm mm mm mm g 641011 10x11 152.4 7.9 21.4 2.0 7.0 8.2 4. 60 8.70 64121 12x1 178.6 10.0 25.0 27.4 9.0 10. 5.7 11 9.70 64114 1x14 178.6 1.1 25.0 27.4 14. 15.1 5.7 11 10.90 641617 16x17 196.0 15.1 29.9 1.9 15.4 17.0 6.4 11 12.00 641922 19x22 207.7 17.0 4.2 8.2 18.9 20.0 7.4 11 1.90 Stock no. Size L H D1 D2 C1 C2 T Weight Price mm mm mm mm mm mm mm mm g 661416 7 16 x 1 2 158.8 11.9 2.0 24. 8.2 9.0 5.5 8 9.70 Insert Tools 10 piece /8 drive insert ratchetting wrench set. Including flexible handle, /8 ratchet head and 8 ring type ratchetting wrenches. All with 9x12mm fitting. Satin finish. TTIG10 Containing 10 piece Insert Ratchetting Wrench Set (265x142x50mm, 1.1 kilos) Flex handle (length 29mm) /8 insert adaptor Insert ratchetting spanners 8, 10, 12, 1, 16, 17, 19mm TTIG10 280.00 26 5
Insert Tools Flexible Handle with two component grip handle. With 9x12mm rectangular cavity to fit Teng Tools insert tools such as 8 ratchet head and ratchetting wrenches. Satin finish. Stock no. Fitting Length Weight Price mm mm g 600010RI 9 x 12 29 248 67.10 Insert /8 drive adaptor. With 9x12mm rectangular fitting for use with flexible handle 600010RI and /8 drive sockets and socket accessories. Satin finish. Stock no. Fitting Length Weight Price mm mm g 60008RI 9 x 12 /8 110 8.0 Ring type insert ratchetting wrenches 8-19mm. With 9x12mm rectangular fitting for use with flexible handle 600010RI. Satin finish. Stock no. Size Fitting Outside diam. Height Weight Price mm mm mm g 600508RI 8 9x12 17 6.8 24 21.80 600510RI 10 9x12 20 7.6 0 22.40 600511RI 11 9x12 21 8.0 2 22.60 600512RI 12 9x12 2 8.5 8 2.40 60051RI 1 9x12 25 8.9 45 2.60 600516RI 16 9x12 0 10.2 60 25.70 600517RI 17 9x12 2 10.6 68 25.90 600519RI 19 9x12 4 11.5 82 28.40 Ratchetting Offset Spanners (RORS wrenches) 6 fibre reinforced chrome vanadium steel ratchetting offset ring spanners. Double ended with 25 12 point heads (6-8mm 6 point). Reversible action. Satin finish. TTRORS RORS wrenches 6 piece metric ratchetting offset ring spanner set (265x142x50mm, 1.26 kilos) 6 x 8mm, 7 x 9mm, 10 x 1mm, 12 x 14mm, 17 x 19mm, 21 x 22mm TTRORS 98.0 Double Ratchetting Offset Ring Spanners (RORS), Offset 25 degrees. Chrome vanadium. Satin Finish. Stock no. Size L H D1 D2 Weight Price mm mm mm mm mm 680608 6x8 112 8.0 20.0 20.0 6 10.40 680709 7x9 1 8.4 21.0 2.0 81 14.0 68101 10x1 16 10.2 26.0 0.0 149 16.0 681214 12x14 172 10.2 0.0 2.0 169 16.50 681719 17x19 20 11.0 7.0 40.0 254 19.00 682122 21x22 25 11.4 41.0 45.0 290 2.70 6
Ratchetting Spanners 6 fibre reinforced chrome vanadium steel ratchetting offset TX-E ring spanners. Double ended with 25 heads. Reversible action. Satin finish. TTRORS-E RORS wrenches 6 piece TX-E ratchetting offset ring spanner set (265x142x50mm, 1.29 kilos) E6xE7, E8xE10, E11xE12, E14xE16, E18xE20, E22xE24 TTRORS-E 99.00 Double offset ring spanner with different size sockets at each end for TX-E heads. Angled 25 towards the handle. Reversible action. Chrome vanadium. Satin finish. Stock no. Size L H D1 D2 Weight Price mm mm mm mm mm g 680607E E6xE7 112 8.0 20.0 20.0 66 17.80 680810E E8xE10 1 8.2 21.0 2.0 84 19.00 681112E E11xE12 140 8.2 2.0 26.0 95 19.90 681416E E14xE16 172 10.2 0.0 2.0 174 24.10 681820E E18xE20 20 11.5 7.0 40.0 280 26.70 682224E E22xE24 25 11.5 41.0 44.0 0 28.80 Pipe Wrenches Lightweight aluminium pipe wrenches in a sturdy design. One hand operation leaving the other hand free. Stock Capacity Capacity Overall length Overall length Weight Price No. mm inches mm inches g PW12A 9 1 9 /16 00 12 710 6.50 PW14A 47 1 7 /8 50 14 950 41.50 PW18A 6 2 1 /2 450 18 1600 59.50 PW24A 76 600 24 2450 85.00 PW6A 127 5 900 6 4460 170.00 Adjustable Wrenches Range Industrial adjustable wrenches made of chrome vanadium. Exceeding international standards ISO 6787-1982, ASME B.107.8M-1996, BS 6-1995, DIN 117-1988, JIS B4604-1976. The 15 jaw allows the wrench to be used in narrow areas as only 0 turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. Non protruding on the movable jaw end gives better action when space is limited. The handle provides a comfortable hand fit. Phosphate finish. Stock no. L L Capacity Capacity T D ISO Norm Weight Price mm inch mm AF mm mm Nm g 4001 100 4 17 11 /16 14 1 50 16.20 4002 150 6 24 15 /16 19 44 85 140 17.0 400 200 8 28 1 1 /8 26 57 180 260 19.90 4004 250 10 1 1 /4 1 68 20 440 24.90 4005 00 12 8 1 1 /2 2 80 515 660 1.90 4006 75 15 50 1 15 /16 44 100 920 1200 69.20 4007 450 18 60 2 /8 5 122-2000 104.90 4008 600 24 70 2 /4 62 144-700 210.00 26 7
Adjustables with bi-material grip Teng Tools adjustable wrenches with bi material grip handles. Stock L L Capacity Capacity T D ISO Norm Weight Price No. mm inch mm AF mm mm Nm g 4002T 157. 6 2.9 15 /16 19 44 140 140 19.90 400T 205.9 8 28.6 1 1 /8 26 57 180 250 2.90 4004T 255. 10 2.8 1 1 /4 1 68 20 420 29.90 4005T 06.1 12 8.1 1 1 /2 2 80 515 700 6.90 8 wide opening thin jaw adjustable wrench. Stock L L Capacity Capacity T D ISO Norm Weight Price No. mm inch mm AF mm mm Nm g 400WT 221 8 8.6 1 1 /2 4.1 72.1 180 260 1.90 22 piece set consisting of a /8 drive torque wrench, 10 crow foot wrenches, bit adaptor, 8 TX bits, and 5 extension bars. TTX892 22 piece /8 drive angular gauge torque wrench set (560x110x60mm, 0.9 kilos) Torque wrench /8 drive angular gauge torque wrench(20-100nm, 15-75 ft/lb) Accessories /8 drive and 5 extensions, adaptor for 10mm hex bits TX bits 10mm hex drive TX8, TX10, TX15, TX20, TX25, TX27, TX0, TX40 Crow foot wrenches /8 drive 10, 11, 12, 1, 14, 15, 16, 17, 18, 19mm TTX892 175.00 Crow foot wrenches 8 drive metric crow foot wrenches. Set of 8 spanners. Satin finish. Chrome vanadium steel. The spanners are supplied on a clip rail with 8 drive. For tightening with socket tools e.g. extension bar and ratchet handle. M808MM Crow foot wrenches 8 piece metric crow foot wrench set 10, 11, 12, 1, 16, 17, 18, 19 mm M808MM 77.50 8 drive AF crow foot wrenches. Set of 7 spanners. Satin finish. Chrome vanadium steel. The spanners are supplied on a clip rail with 8 drive. For tightening with socket tools e.g. extension bar and ratchet handle. M807AF 7 piece crow foot wrench set Crow foot wrenches /8, 7 /16, 1 /2, 9 /16, 5 /8, 11 /16, /4 M807AF 69.00 8
Crow foot wrenches Metric Crow Foot Wrenches for tightening with socket tools, e.g. extension bar and ratchet handle. Chrome vanadium. Satin Finish. Stock no. Drive Size L H D Weight Price mm mm mm mm g M86510-C /8 10 2. 4.8 21. 6 9.10 M86511-C /8 11 4. 5.2 2.1 50 9.70 M86512-C /8 12 6.2 5.6 25.5 58 9.90 M8651-C /8 1 7.4 6.0 26.9 70 9.90 M86514-C /8 14 40.0 6.2 0.2 86 10.20 M86515-C /8 15 41. 6.7. 90 10.0 M86516-C /8 16 41. 6.7. 114 10.80 M86517-C /8 17 45.5 8.5 8.1 116 11.50 M86518-C /8 18 45.5 8.5 8.1 140 11.80 M86519-C /8 19 28.0 8.5 9.6 168 1.20 Tubular Wrenches 7 piece set of double ended tubular socket wrenches, 6 to 19mm. Forged with hexagon shaft and hole for turning with a spanner or a tommy bar. Chrome vanadium. Satin finish. TTTW07 Double End Tubular Socket Wrenches tommy bar 7 piece Double End Tubular Socket Wrench Set (265x142x50mm, 1.1 kilos) 6x7mm, 8x9mm, 10x11mm,12x1mm,14x15mm, 16x17mm,18x19mm for 6 to 19mm tubular wrenches TTTW07 89.90 Double ended tubular wrenches, drop forged. With hexagon shaft and hole for turning either with a spanner or a tommy bar. Chrome vanadium. Hollow shaft for protruding threads all the way through. Satin finish. Stock no. Size Overall Length Price mm mm 60607T 6x7 105 9.80 60809T 8x9 110 10.50 61011T 10x11 120 11.10 6121T 12x1 140 1.00 61415T 14x15 145 14.0 61617T 16x17 155 15.90 61819T 18x19 165 20.40 62022T 20x22 175 20.90 6212T 21x2 185 2.90 62427T 24x27 195 27.70 62528T 25x28 205 28.70 602T 0x2 210 6.90 60011 tommy bar for wrenches 6-19mm 1 8.20 60012 tommy bar for wrenches 20-2mm 1 9.80 Nut Drivers Mega Drive nut drivers. Chrome vanadium steel shank. 6 point opening. Ergonomically designed two component handle with hanging hole. Stock Size Shaft length Overall length Weight Price No. mm mm mm g MDN405 5.0 125 245 120 11.20 MDN4055 5.5 125 245 120 11.20 MDN406 6.0 125 245 120 11.20 MDN407 7.0 125 245 120 11.20 MDN408 8.0 125 245 120 11.50 MDN410 10.0 125 245 120 11.60 MDN411 11.0 125 245 120 11.90 MDN412 12.0 125 245 120 12.20 MDN41 1.0 125 245 120 12.90 26 9
T handle nut drivers Mega Drive T Handle nut drivers with chrome vanadium steel shank with 6 point opening. Ergonomically designed two component handle with hanging hole. Stock Size Overall length Price No. mm mm MDNT405 5.0 288 11.20 MDNT4055 5.5 288 11.0 MDNT406 6.0 288 11.50 MDNT407 7.0 288 11.80 MDNT408 8.0 288 12.40 MDNT409 9.0 288 12.90 MDNT410 10.0 288 1.20 MDNT411 11.0 288 1.80 MDNT412 12.0 288 14.60 MDNT41 1.0 288 14.60 MDNT414 14.0 288 16.00 Hook & pin wrenches Set consisting of combined pin/hook spanners with pin adaptors and 2 spare pins with 6 and 8mm diameters. Supplied in a Teng Tools TC tray with removable lid. TTHP08 8 piece hinged hook and pin wrench set (265x142x50mm, 1.1 kilos) Hook handles /4 to 2, 1 1 /4 to, 2 to 4 /4 Pin adaptors 4mm, 5mm, 6mm Pins 6mm, 8mm TTHP08 141.60 Hook Wrenches Adjustable Hook Wrenches. With hook for locking nuts according to DIN 1804. Chrome vanadium. Stock no. Capacity Capacity Overall Overall Weight Price length length) mm inches mm inches g HP101 19 to 50 /4 to 2 145 5 /4 122 26.00 HP102 2 to 75 1 1 /4 to 178 7 24 8.20 HP10 50 to 120 2 to 4 /4 247 9 /4 447 45.00 Pin Wrenches Adjustable Pin Wrenches. With fixed pin for locking nuts according to DIN 1816. Chrome vanadium. Stock no. Pin Capacity Capacity Overall Overall Weight Price Size length length mm inches mm inches g HP2014 4 19 to 50 /4 to 2 145 5 /4 122 4.00 HP2015 5 19 to 50 /4 to 2 145 5 /4 122 4.00 HP2025 5 2 to 75 1 1 /4 to 178 7 227 45.00 HP2026 6 2 to 75 1 1 /4 to 178 7 227 45.00 HP206 6 50 to 120 2 to 4 /4 247 9 /4 451 51.00 HP208 8 50 to 120 2 to 4 /4 247 9 /4 451 51.00 40