GMVC96. Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

Similar documents
GMVC96. Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

Cabinet Features. Certified for direct vent (2-pipe) or Two-stage gas valve provides quiet,

DM96VC. Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE Heating Input: 40, ,000 BTU/h

Designed for multi-position installation Heavy-duty aluminized-steel tubular heat exchanger

Designed for multi-position installation Heavy-duty stainless-steel tubular heat exchanger

GMVC96. Variable-Speed ECM Gas Furnace

AMVC95/ACVC95 Gas Furnaces

AMVC8/ADVC8. Heating Input: 60, ,000 BTU/h

DM96HS / DC96HS. Hybrid Two-Stage Multi-Speed Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

GMEC96. Two-Stage, Multi-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 30, ,000 BTU/h

GMEC96. Two-Stage, Multi-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 30, ,000 BTU/h

GCEC96. Two-Stage, Multi-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

AMEC96. Heating Input: 30, ,000 BTU/h

GMSS96 / GCSS96 Single-Stage Multi-Speed Gas Furnace

GMSS92 / GCSS92 Single-Stage Multi-Speed Gas Furnace

DC96VE. Two-Stage, Multi-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

DC96HS TWO-STAGE CONVERTIBLE MULTI-SPEED GAS FURNACE UP TO 96% AFUE. Heating Input: 46, ,000 BTU/h

Cabinet Features. upflow, horizontal left or right matically adjusts to high or low stage

GKS9 Series. Upflow Multi-Position, Multi-Speed Gas Furnace. Heating Input: 46, ,000 BTU/h

GMS8/GDS8/GHS8 Multi-Position, Multi-Speed Gas Furnaces

GKS9 SERIES PRODUCT SPECIFICATIONS 92.1% AFUE SINGLE-STAGE/MULTI-SPEED GAS FURNACE UPFLOW/MULTI-POSITION HEATING INPUT: 46, ,000 BTU/H

GMH8/GDH8. Two-Stage Convertible Multi-Speed Gas Furnaces 80% AFUE

AKSS92. Single-Stage. Heating Input: 46, ,000 BTU/h. up to 92.1% AFUE

DD80HS. Two-Stage, Convertible Multi-Speed Gas Furnace 80% AFUE. Heating Input: 40, ,000 BTU/h

GKS9 Series. up to 92.1% AFUE. Upflow Multi- Position, Multi-Speed Gas Furnace. Heating Input: 46, ,000 BTU/h

GMS8/GDS8/GHS8. Single-Stage, Multi-Speed, Multi-Position Gas Furnace 80% AFUE. Heating Input : 40, ,000 BTU/h

DM80SS / DD80SS. Single-Stage, Multi-Speed Gas Furnaces 80% AFUE Heating Input: 40, ,000 BTU/h

GMS9/GCS9 SERIES 93% AFUE

Multi-Position, Multi-Speed Gas Furnaces

AMS8 / ADSS8. Single-Stage Multi-Speed Gas Furnaces 80% AFUE. Heating Input: 40, ,000 BTU/h

VMS8/VDS8. Single-Stage, Single Speed, Multi-Position Gas Furnace 80% AFUE. Heating Input : 40, ,000 BTU/h

AMS8/ADSS8. Single-Stage. Heating Input: 40, ,000 BTU/h

TECHNICAL MANUAL. *CVC97/*MVC97 97% Gas Furnace Units

GMH95/GCH9 PRODUCT SPECIFICATIONS 95%/93% AFUE HEAT REPLACEMENT MULTI-POSITION, TWO-STAGE (CONVERTIBLE), MULTI-SPEED GAS FURNACE

2- to 5-Ton. Cooling Capacities: 23,600 to 57,000 BTU/h. Packaged Gas/Electric Units. Heating Capacities: 46,000 to 138,000 BTU/h

GPC13M R-410A, 13 SEER. Packaged Air Conditioner. 3, 4, & 5 Tons. Cooling Capacity: 36,000-56,000 BTU/h

A95-2V. 95% Gas Furnaces Two-Stage Variable Speed HEAT EXCHANGER DESIGN CONFIGURATIONS

TECHNICAL GUIDE 80 AFUE MULTI-POSITION GAS FURNACES MODELS: G8C SERIES 4-POSITION MBH INPUT 3-POSITION 150 MBH INPUT DESCRIPTION WARRANTY

GSZ16. High-Efficiency Split System Heat Pump Up to 16 SEER & 9.0 HSPF 1½ to 5 Tons

ASXC18. High-Efficiency, ComfortNet -Compatible, Split-System Air Conditioner Up to 19 SEER. Cooling Capacity: 24,000-60,000 BTU/h

DP14GM. Packaged Gas / Electric 14 SEER / 81% AFUE 2 to 5 Tons. Cooling Capacity: 23,000 57,500 BTU/h Heating Capacity: 40, ,000 BTU/h

PRODUCT SPECIFICATIONS GMS8/GDS8/GHS8 SERIES 80% AFUE MULTI-POSITION, SINGLE-STAGE/MULTI-SPEED GAS FURNACE

DP15CH. Packaged Air Conditioner UP TO 15 SEER 2 to 5 Tons. Cooling Capacity: 23,600-57,500 BTU/h

High-quality UV-resistant powder-paint finish aluminized steel tubular heat exchanger

95G2E PRODUCT SPECIFICATIONS 95% TWO-STAGE CONSTANT TORQUE GAS FURNACES CONTROLS VENTING CONFIGURATIONS HEAT EXCHANGER DESIGN INSTALLATION FEATURES

DSXC18. Split System Air Conditioner. 34,000-56,000 BTU/h

GPG13 SINGLE-PHASE, SELF-CONTAINED

GPG14M. 2- to 5-Ton Packaged Gas/Electric Units 14 SEER / 81% AFUE

A962E PRODUCT SPECIFICATIONS TWO STAGE HIGH EFFICIENCY CONSTANT TORQUE GAS FURNACE CONTROLS VENTING CONFIGURATIONS HEAT EXCHANGER DESIGN

GPH13H. Packaged Heat Pump. 13 SEER / R-410A 2 to 5 Tons. Cooling Capacity: 24,000-57,500 BTU/h Heating Capacity: 22,000-54,500 BTU/h

DP13CM. Packaged Air Conditioner 3, 4, & 5 Tons / 13 SEER. Cooling Capacity: 36,000-56,000 BTU/h

GPC13H. 2- to 5-Ton Packaged Air Conditioner 13 SEER / R-410A. Cooling Capacity: 24,000-59,000 BTU/h

GPH13M. 13 SEER / R-410A 2 to 5 Tons

U L OIL-FIRED FURNACES. Stellar MBH OUTPUT 80 AFUE DESCRIPTION FEATURES MULTI-POSITION MODELS - P1FM DOWNFLOW/HORIZONTAL MODELS - P1FH

Packaged Gas/Electric. Cooling Capacity: 23,000 57,500 BTU/h

DP14HM Commercial 3-5 TON THREE-PHASE PACKAGED HEAT PUMPS 14 SEER. Cooling Capacity: 34,400-58,000 BTU/h Heating Capacity: 33,200-57,000 BTU/h

Product Data. that this product meets the S 95% AFUE S Two -stage operation

AWUF Series. Wall-Mount Air Handler 1½- to 3-Tons

Multi-Position Air Handler. 1½ to 5 Tons. with Energy-Saving Motor

FG7T (E and N Series)

KG7T (E and N Series)

DX18TC. High-Efficiency, ComfortNet -Compatible, Split System Air Conditioner Up to 19 SEER. Cooling Capacity: 34,600-58,000 BTU/h

95G1-E. Aluminized steel primary heat exchanger with crimped non-welded construction AL 29-4C Stainless steel secondary heat exchanger

95G1E PRODUCT SPECIFICATIONS SINGLE STAGE CONSTANT TORQUE MOTOR VENTING INSTALLATION FEATURES WARRANTY CONFIGURATIONS HEAT EXCHANGER DESIGN BURNER

DP14GM Commercial 14 SEER / 81% AFUE 3-5 TON, THREE-PHASE PACKAGED GAS/ELECTRIC. Cooling Capacities: 34,200 to 57,000 BTU/h

95% Gas Furnaces. Single Stage - High Efficiency (Constant Torque) Motor. Features and Benefits 95G1-E CONFIGURATIONS HEAT EXCHANGER DESIGN BURNER

95% Gas Furnaces A95-1E. Single Stage - High Efficiency (Constant Torque) Motor. Features and Benefits CONFIGURATIONS

Product Data. 95% AFUE Single Stage Furnace Upflow / Downflow / Horizontal. ama 58HDX COMFORT 95 DIRECT OR NON---DIRECT VENT CONDENSING GAS FURNACE

UPFLOW/DOWNFLOW/HORIZONTAL (NATURAL GAS)

A951E PRODUCT SPECIFICATIONS CONTROLS VENTING INSTALLATION FEATURES CONFIGURATIONS WARRANTY HEAT EXCHANGER DESIGN BURNER CABINET DESIGN

ARUF Series Multi-Position

ASPT Multi-Position Air Handler

GPC13M COMMERCIAL PRODUCT SPECIFICATIONS 13 SEER PACKAGED AIR CONDITIONER 3- TO 5-TON COOLING CAPACITY 35,000-56,000 BTU/H

80% Gas Furnaces Single Stage - High Efficiency (Constant Torque) Motor

96G1E PRODUCT SPECIFICATIONS SINGLE STAGE CONSTANT TORQUE MOTOR VENTING INSTALLATION FEATURES WARRANTY CONFIGURATIONS HEAT EXCHANGER DESIGN BURNER

80% Gas Furnace. Single Stage - High Efficiency (Constant Torque) Motor. Features and Benefits 80G1-E CONFIGURATIONS HEAT EXCHANGER DESIGN BURNERS

Product Data 58GFA. Induced-Combustion Upflow Furnace Heating Inputs: 65,000 thru 150,000 Btuh. 78% AFUE With Continuous- Pilot Ignition

ARPT. Multi-Position 1½ to 5 Tons Construction

CPG Commercial. 7½- to 12½-Ton Self-Contained Packaged 80% AFUE. Cooling Capacity: 90, ,000 BTU/h. Gas/Electric Units. up to 11.

GUH 95 Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS

DCG Commercial. 3- to 6-ton Packaged Gas/Electric Units. Cooling Capacity: 34,600 71,000 BTU/h Heating Capacity: 36, ,400 BTU/h

DZ11S Commercial & 10-Ton, Three-Phase

TECHNICAL GUIDE MODELS: MV MODULAR VARIABLE SPEED AIR HANDLERS FOR USE WITH SPLIT SYSTEM COOLING & HEAT PUMP DESCRIPTION FEATURES

AF90. AF90 Gas Furnace High Efficiency. Features

TECHNICAL GUIDE MODELS: G8T-UP 80 AFUE UPFLOW/HORIZONTAL GAS-FIRED FURNACES DESCRIPTION WARRANTY FEATURES Rev.

TECHNICAL GUIDE MODELS: P4HU 80 AFUE MULTI-POSITION GAS-FIRED FURNACES DESCRIPTION. WARRANTY 20-year limited warranty on the heat exchanger.

ASPF. Product Specifications. Multi-Position Air Handler. 1½ to 5 Tons. with Energy-Saving Motor

ARUF. Multi-Position Air Handler. 1½ to 5 Tons. Construction

DSG Commercial. 3-5 Ton Packaged Gas/ Electric Units 14 SEER / up to 12.0 EER Up to 81% Efficient

92G1 PRODUCT SPECIFICATIONS SINGLE STAGE GAS FURNACE CONFIGURATIONS HEAT EXCHANGER DESIGN BURNER CABINET DESIGN AIR DELIVERY SYSTEM CONTROLS VENTING

TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS WARRANTY

FG7S (C and L Series)

DSC Commercial. 3-5 Ton Packaged Air Conditioner 14 SEER / Up to 12.0 EER. Cooling Capacity: 35,000 58,000 BTU/h

KG7T (C and L Series)

DTC Commercial. 3-5 Tons Packaged Air Conditioner Up to 15.5 SEER / Up to 13.0 EER. Cooling Capacity: 35,600 60,000 BTU/h

KG7T (C and L Series)

ARUF. 1½ to 5 Tons. O when tested in accordance with ASHRAE standard 193 Cabinet air leakage less than 1.4% at 0.5 inch H 2

TECHNICAL GUIDE MODELS: MA MODULAR AIR HANDLERS FOR USE WITH SPLIT SYSTEM COOLING & HEAT PUMP DESCRIPTION FEATURES

PGC COMMERCIAL PACKAGED GAS/ELECTRIC

FG7T (A and K Series)

Transcription:

Heating Input: 0,000 0,000 TU/h Two-Stage, Variable-Speed EM Gas Furnace Up to 96% FUE ontents Nomenclature... Product Specifications... imensions... irflow ata... Wiring iagrams... 9 ccessories... 0 Standard Features omfortnet ommunicating System compatible Heavy-duty aluminized-steel tubular heat exchanger Stainless-steel secondary heat exchanger Two-stage gas valve provides quiet, economical heating urable Silicon Nitride igniter Quiet two-speed induced draft blower Utilizes omfortnet communicating, two-stage or single-stage thermostats Self-diagnostic control board with constant memory fault code history output to a dual 7-segment display olor-coded low-voltage terminals with provisions for electronic air cleaner and humidifier Efficient and quiet variable-speed airflow system gently ramps up or down according to heating or cooling demand Multiple continuous fan speed options offer quiet air circulation uto-omfort and enhanced dehumidification modes available ll models comply with alifornia 0 ng/j Low x emissions standard abinet Features esigned for multi-position installation upflow, horizontal left or right ertified for direct vent (-pipe) or non-direct vent (-pipe) Easy to install top venting with optional side venting onvenient left or right connection for gas and electrical service abinet air leakage (QLeak) % Heavy-gauge steel cabinet with durable baked-enamel finish Fully insulated heat exchanger and blower section irtight solid bottom or side-return with easy-cut tabs for effortless removal in bottom air-inlet applications ENER STR and the ENER STR mark are registered trademarks owned by the U.S. Environmental Protection gency. ENER STR products are third-party certified by an EP-recognized ertification ody. Products that earn the ENER STR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection gency. * omplete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the Lifetime Heat Exchanger Limited Warranty (good for as long as you own your home), 0-Year Unit Replacement Limited Warranty and 0-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in alifornia or Québec. SS- www.goodmanmfg.com /7 Supersedes /6

Nomenclature G M V 96 060 N **,6 7,8,9 0, rand G - Goodman rand Engineering Major / Minor Revisions * Not used for inventory control. onfiguration x M - Upflow/Horizontal N - Low x - ownflow/horizontal abinet Width Motor - 7½ - " V - Variable Speed EM / omfortnet - ½" E - Multi-Speed EM S - Single Speed Maximum - 800-600 Gas Valve - 00-000 M - Modulating - Two- Stage MTU/h S - Single Stage 00-0,000 TU/h 060-60,000 TU/h FUE 0-0,000 TU/h 97-97% FUE 96-96% FUE 9-9% FUE ccessories Model escription 00N 060N 080N 080N 00N TK0 omfortnet-compatible ontrol VENT- oncentric Vent Kit (") VENT- oncentric Vent Kit (") FS7 ownflow Sub-ase 7." --- --- --- --- --- --- FS ownflow Sub-ase " --- --- --- --- --- --- FS ownflow Sub-ase " --- --- --- --- --- --- RF000 rain Kit -Horizontal Left Vertical Flue EFR0 External Filter Rack with 6"x" Permanent Filter --- --- 070K00000S Flush Mount Vent Kit - " or " 070K0000S Flush Mount Vent Kit - " FE8-60 Fossil Fuel (ual Fuel) Kit 0N HSFK High-ltitude Natural Gas Kit HSFK- HSFK- HSFK- HSFK- HSFK- HSFK- HSFK High-ltitude LP Gas Kit HSFK- HSFK- HSFK- HSFK- HSFK- HSFK- LPLP0 Low LP Gas Pressure Switch LPM-08 LP onversion Kits www.goodmanmfg.com SS-

Product Specifications 00N 060N 080N 080N 00N 0N Heating ata High Fire Input¹ 0,000 60,000 80,000 80,000 00,000 0,000 High Fire Output¹ 8,00 7,600 76,800 76,800 96,000,00 Low-Fire Steady-State Input¹ 8,000,000 6,000 6,000 70,000 8,000 Low-Fire Steady-State Output¹ 6,880 0,0,760,760 67,00 80,60 FUE² 96 96 96 96 96 96 Temperature Range - 6 0-0 - 6 - - 6-6 Vent iameter³ " - " " - " " - " " - " " - " " - " No. of urners 6 irculator lower vailable @ 0." ESP. -. -. -. - - - Size ( x W) 0" x 8" " x 8" " x 8" " x 0" " x 0" " x " Horsepower @ 07 RPM ½ ½ ½ ¾ Speed VS EM VS EM VS EM VS EM VS EM VS EM Electrical ata Min. ircuit mpacity⁴ 7.8 7.8 7.8 0.6.. Max. Overcurrent evice (amps)⁵ 0 0 Shipping Weight (lbs) 7 0 6 ¹ Natural Gas TU/h ² OE FUE based upon Isolated ombustion System (IS) ³ Installer must supply one or two PV pipes: one for combustion air (optional) and one for the flue outlet (required). Vent pipe must be either " or " in diameter, depending upon furnace input, number of elbows, length of run and installation ( or pipes). The optional ombustion ir Pipe is dependent on installation/code requirements and must be " or " diameter PV. ⁴ Minimum ircuit mpacity = (. x irculator lower mps) + I lower amps. Wire size should be determined in accordance with National Electrical odes. Extensive wire runs will require larger wire sizes. ⁵ Maximum Overcurrent Protection evice refers to maximum recommended fuse or circuit breaker size. May use fuses or HR-type circuit breakers of the same size as noted. Notes ll furnaces are manufactured for use on V, 60 Hz, single-phase electrical supply. Gas Service onnection ½" FPT Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical ode and/or all existing local codes. For bottom return: Failure to unfold flanges may reduce airflow by up to 8%. This could result in performance and noise issues. For servicing or cleaning, a " front clearance is required. Unit connections (electrical, flue and drain) may necessitate greater clearances than the minimum clearances listed above. In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater. SS- www.goodmanmfg.com

imensions ir ischarge ir ischarge 8¾ ir Intake " Pipe Left-Side rain Trap Exterior Holes 6½ ¾ ⅝ enter imple For lternate ir Intake Pipe " O Hole High-Voltage Electrical Outlet Standard Gas Supply Location ¾ ⅞ ¾ Vent/ Flue Pipe " PV Right-Side rain Trap Exterior Holes High-Voltage Electrical Outlet lternate Gas Supply 6½ 9½ lternate Vent/ Flue Location ¾ ½ ½ 9¼ 9⅝ ⅞ ⅞ 6½ ⅛ 9⅝ 9¼ ⅜ LEFT SIE VIEW Low-voltage Electrical Outlet ⅞ ⅜ ½ ondensate rain Trap Exterior onnection (Right or Left Side) ¾ PV FRONT VIEW Unfolded Flanges E Folded Flanges ⅞ Low-Voltage Electrical Outlet ⅞ ⅜ ½ RIGHT SIE VIEW Unfolded Flanges ½ Folded Flanges ir ischarge Model W H E ir Return 00N 7½" 8⅞" ½" 7½" 6" ⅞" ⅛" ⅝" 060N 7½" 8⅞" ½" 7½" 6" ⅞" ⅛" ⅝" 080N 7½" 8⅞" ½" 7½" 6" ⅞" ⅛" ⅝" 080N " 8⅞" ½" " 9½" 7⅞" 6" 7½" 00N " 8⅞" ½" " 9½" 7⅞" 6" 7½" 0N ½" 8⅞" ½" ½" " 0⅞" 9⅜" 0⅞" Minimum learances to ombustible Materials Position Sides Rear Front ottom Flue Top Upflow 0" 0" " 0" " Horizontal 6" 0" " 0" 6" = If placed on combustible floor, the floor MUST be wood ONLY. www.goodmanmfg.com SS-

irflow ata 00N ooling Speed (@." -.8" w.c. ESP) 00N Heating Speed @." -." w.c. ESP; Range: - 6 F) Minus 0% 6 6 Minus 0% 89 68 n/a Minus % 66 8 Minus % 9 69 n/a Normal 96 0 Normal 990 7 n/a Plus % 66 Plus % 00 768 n/a Plus 0% 66 Plus 0% 089 80 6 Minus 0% 76 7 Minus 0% 977 70 n/a Minus % 76 0 Minus % 0 760 n/a Normal 796 7 Normal 08 800 6 Plus % 86 Plus % 9 80 6 Plus 0% 876 80 Plus 0% 9 880 8 Minus 0% 877 608 Minus 0% 067 76 n/a Minus % 9 6 Minus % 6 808 6 Normal 97 67 Normal 8 80 9 Plus %,0 709 Plus % 89 6 Plus 0%,07 7 Plus 0% 0 9 Minus 0%,07 7 Minus 0% 80 8 Minus %, 76 Minus % 86 Normal,9 80 Normal 79 9 Plus %, 8 Plus % 97 0 Plus 0%, 88 Plus 0% 07 00 8 060N ooling Speed (@." -.8" w.c. ESP) 060N Heating Speed (@." -." w.c. ESP; Range: 0-0 F) Minus 0% 9 8 Minus 0% 88 600 n/a Minus % 69 78 Minus % 90 6 n/a Normal 99 98 Normal 9 667 n/a Plus % 69 8 Plus %,00 700 n/a Plus 0% 69 8 Plus 0%,08 7 n/a Minus 0% 7 0 Minus 0% 9 666 n/a Minus % 776 9 Minus %,006 70 n/a Normal 87 7 Normal,09 70 0 Plus % 88 8 Plus %, 777 8 Plus 0% 899 6 Plus 0%,6 8 6 Minus 0% 906 66 Minus 0%,0 77 n/a Minus % 97 66 Minus %,00 768 8 Normal,007 696 Normal,8 808 6 Plus %,07 7 Plus %,6 88 Plus 0%,08 766 Plus 0%,7 889 Minus 0%,09 79 Minus 0%, 79 7 Minus %, 770 Minus %,97 87 Normal, 80 Normal,60 88 Plus %,7 8 Plus %, 9 0 Plus 0%, 89 Plus 0%,86 969 8 Notes ll furnaces ship as high speed for cooling. Installer must adjust blower speed as needed. For most jobs, about 00 per ton when cooling is desirable. INSTLLTION IS TO E JUSTE TO OTIN TEMPERTURE RISE WITHIN THE RNGE SPEIFIE ON THE RTING PLTE. 00N 060N 080N 080N Minimum Filter Sizes 00N 0N Filter Size (in²) (Qty) () 6 x (side or bottom) () 0 x (bottom) or () 6 x (side) Note: Other size filters of equal or greater dimensions may be used. Filters may also be centrally located. SS- www.goodmanmfg.com

irflow ata (cont.) 080N ooling Speed ( @." -.8" w.c. ESP) Minus 0% 66 6 080N Heating Speed (@." -." w.c. ESP; Range: - 6 F) Normal 69 0 Normal,0 8 9 Minus 0%,08 770 n/a Minus % 98 8 Minus %, 8 6 Plus % 660 Plus %,6 898 6 Plus 0% 69 Plus 0%, 9 Minus 0% 7 86 Minus 0%,8 8 60 Minus % 766 Minus %,0 877 7 Normal 806 0 Normal,6 9 Plus % 86 67 Plus %,8 969 Plus 0% 887 9 Plus 0%,8,0 9 Minus 0% 9 6 Minus 0%,0 90 7 Minus % 97 670 Minus %,0 98 Normal,0 70 Normal,89,0 Plus %,07 70 Plus %,8,08 9 Plus 0%, 776 Plus 0%,8,6 7 Minus 0%,07 77 Minus 0%,6 97 7 Minus %,69 778 Minus %,6,00 Normal,0 89 Normal,96,06 Plus %,9 860 Plus %,66,6 9 Plus 0%, 90 Plus 0%,6,69 6 080N ooling Speed ( @." -.8" w.c. ESP) Minus 0% 70 6 080N Heating Speed (@." -." w.c. ESP; Range: - F) Normal 789 Normal,0 867 n/a Minus 0%,08 780 n/a Minus % 70 87 Minus %, 8 n/a Plus % 88 9 Plus %,6 90 n/a Plus 0% 868 6 Plus 0%, 9 Minus 0% 870 9 Minus 0%,8 8 n/a Minus % 99 67 Minus %,0 89 n/a Normal 967 660 Normal,6 99 Plus %,0 69 Plus %,8 986 Plus 0%,06 76 Plus 0%,8,0 9 Minus 0%,06 7 Minus 0%,0 9 n/a Minus %, 7 Minus %,0 96 Normal,8 79 Normal,89,06 Plus %, 8 Plus %,8,067 9 Plus 0%,00 870 Plus 0%,8,8 7 Minus 0%,8 8 Minus 0%,6 969 n/a Minus %,06 867 Minus %,6,0 Normal,7 9 Normal,96,077 Plus %, 99 Plus %,66, 9 Plus 0%,,00 Plus 0%,6,8 6 Notes ll furnaces ship as high speed for cooling. Installer must adjust blower speed as needed. For most jobs, about 00 per ton when cooling is desirable. INSTLLTION IS TO E JUSTE TO OTIN TEMPERTURE RISE WITHIN THE RNGE SPEIFIE ON THE RTING PLTE. 6 www.goodmanmfg.com SS-

irflow ata (cont.) 00N ooling Speed ( @." -.8" w.c. ESP) Minus 0% 78 08 00N Heating Speed (@." -." w.c. ESP; Range: - 6 F) Normal 80 6 Normal,88,6 9 Minus 0%,66,0 Minus % 779 6 Minus %,77,9 Plus % 86 9 Plus %,909,9 7 Plus 0% 90 60 Plus 0%,000,8 Minus 0%,00 706 Minus 0%,68,6 Minus %,076 7 Minus %,777,7 0 Normal, 78 Normal,870,9 8 Plus %,90 8 Plus %,96,7 Plus 0%,6 86 Plus 0%,07, Minus 0%,8 88 Minus 0%,79,8 Minus %,9 9 Minus %,8,0 9 Normal,6 98 Normal,90,6 7 Plus %,7,0 Plus %,006,8 Plus 0%,60,080 Plus 0%,0,8 Minus 0%,6, Minus 0%,76, 0 Minus %,69,96 Minus %,89,90 8 Normal,76,9 Normal,97,8 Plus %,8, Plus %,0,6 Plus 0%,90,8 Plus 0%,,9 0N ooling Speed ( @." -.8" w.c. ESP) Minus 0% 780 9 0N Heating Speed (@." -." w.c. ESP; Range: - 6 F) Normal 867 7 Normal,89,9 6 Minus 0%,70,96 6 Minus % 8 0 Minus %,796,6 9 Plus % 90 7 Plus %,986,9 Plus 0% 9 60 Plus 0%,080,6 Minus 0%,0 78 Minus 0%,76,6 6 Minus %,0 789 Minus %,8,9 8 Normal,60 8 Normal,90,6 Plus %,8 87 Plus %,07,0 Plus 0%,76 9 Plus 0%,,98 0 Minus 0%,0 98 Minus 0%,77, 60 Minus %,9 969 Minus %,870, 7 Normal,67,00 Normal,968,90 Plus %,0,07 Plus %,066,60 Plus 0%,6, Plus 0%,6,9 9 Minus 0%,79,0 Minus 0%,8,96 8 Minus %,8, Minus %,97,68 Normal,90,78 Normal,08,0 Plus %,006, Plus %,9, 0 Plus 0%,0,06 Plus 0%,,8 8 Notes ll furnaces ship as high speed for cooling. Installer must adjust blower speed as needed. For most jobs, about 00 per ton when cooling is desirable. INSTLLTION IS TO E JUSTE TO OTIN TEMPERTURE RISE WITHIN THE RNGE SPEIFIE ON THE RTING PLTE. SS- www.goodmanmfg.com 7

EHUM Wiring iagram GR YL TES: R IRUIT ONNET TWO STGE GS VLVE (ITEROGERS) YL R GN EM MTR HRNESS HOT SURFE IGNITER L / V HUM- OUT E 0 7 FUSE LOW FIRE PRESSUR E SWITH UTO RESET UXILIRY LIMIT ONTROL HUM- IN 8 R 9 6 HUM OOL F TRIM % OOL PRFL HET F EHUM ENLE TRIM ENLE ONT FN HET OFF LY SEE TE R FS T-STT G L W W Y IP SWITHES Y IRUIT ONNET IRUIT MOT ONNET TWO-STGE INTEGRTE ONTROL MOULE IGSTI LE'S O V THERMOSTT ONNETIONS. SET HET NTIIPT ON ROOM THERMOSTT T 0.7 MPS.. MNUFTURER'S SPEIFIE REPLEMENT PRTS MUST E USE EN SERVIING.. UNIT MUST E PERMNENTLY GROUNE N ONFM TO N.E.. N LOL OES. R LINE MNUL RESET ROLLOUT LIMIT ONTROLS (SINGLE ONTROL ON 0 ktu) UTO RESET PRIMRY LIMIT ONTROL PM LOWER OMPRTMENT HI URNER OMPRTMENT L IRULT LOWER I LOWER TWO-STGE PRESSURE SWITH SSEMLY GR FRONT OVER PRESSURE SWITH. IF NY OF THE IGINL WIRE S SUPPLIE WITH THE FURNE MUST E REPLE, IT MUST E REPLE WITH WIRING MTERIL HVING TEMPERTURE RTING OF T LEST 0 $. USE OPPER ONUTS ONLY.. TO RELL THE LST 6 FULTS, MOST REENT TO LEST REENT, EPRESS SWITH F ME THN SEONS ILE IN STNY ( THERMOSTT INTS) 6. HUMIIFIER INSTLLTION OPTIONS: USE HUM TERMINL TO RUN HUMIIFIER URING HET LL (OMMUNITING LEGY MOES). USE HUM-IN N HUM-OUT TERMINLS TO RUN HUMIIFIER URING HET LL ( OMMUNITING MOE LEGY MOE) INEPENENTLY FROM HET LL (OMMUNITING MOE ONLY - SETUP IS ONE WITHIN OMMUNITING THERMOSTT) YL INUE RFT LOWER EHUM 0 V R L TRNSFMER INUT OIL (ON SOME MOELS) HIGH FIRE PRESSURE SWITH V V OL OES: PINK R ROWN ITE L LUE GRY RE YL YELLOW NGE RPLE GN GREEN LK JUNTION OX YL FLME SENS L GN R HSSIS GROUN LOWER OMPRTMENT O SWITH (OPEN EN O OPEN) WRNING: ISONNET POWER EFE SERVIING. WIRING TO UNIT MUST E PROPERLY POLRIZE N GROUNE. INTEGRTE ONTROL MOULE V THERMOSTT ONNETIONS TO V/ Ø /60 HZ POWER SUPPLY WITH OVERURRENT PROTETION EVIE R Y W W Y G O TO R FUSE TO MIRO TO MIRO O SWITH INUT OIL (ON SOME MOELS) LINE HUM-OUT LINE LOW VOLTGE (V) LOW VOLTGE FIEL HI VOLTGE (V) HI VOLTGE FIEL HUM E TO +V HUM-IN IGN FS TH () PS () HLI () TR () TX () UX SEE TE 6 V UTO RESET UXILIRY LIMIT ONTROLS HLO (0) PSO (7) PS () MVL () () HIGH FIRE PRESS. SWTIH MV (8) MVH () () + V () RX () INTEGRTE ONTROL MOULE JUNTION TERMINL INTERNL TO INTEGRTE ONTROL PLUG ONNETION ISONNET L JUNTION OX I IR IRULT LWR HUMIIFIER HUMIIFIER ELETRONI IR LENER IN HI I LWR IN LO HOT SURFE IGNITER FLME SENS V L N TO V/ Ø /60 HZ POWER SUPPLY WITH OVERURRENT PROTETION EVIE WRNING:ISONNET POWER EFE SERVIING. WIRING TO UNIT MUST E PROPERLY POLRIZE N GROUNE. I IR IRULT LWR N 0 V TRNSFMER MNUL RESET ROLLOUT LIMIT ONTROLS FRONT OVER PRESSURE SWITH FIEL SPLIE SWITH (PRESS.) ISONNET EQUIPMENT FIEL SWITH (TEMP.) OVERURRENT PROT. EVIE UTO RESET PRIMRY LIMIT ONTROL IGNITER LOW FIRE PRESS. SWITH PM HI GS VLVE INTEGRTE ONTROL MOULE High Voltage: isconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death. Wiring is subject to change. lways refer to the wiring diagram on the Warning unit for the most up-to-date wiring. 00F0006- Goodman Manufacturing ompany, L.P., reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations. 0 Goodman Manufacturing ompany, L.P. Houston, Texas 8 www.goodmanmfg.com SS-