www.osram.com/prevaled-linear PrevaLED Linear HV Ideal alternative to linear fluorescent lamp source Basic description PrevaLED Linear Value HV series offers innovative solutions for a variety of general lighting applications. Providing seamless longlife, energy-efficient, and economical lighting alternative to linear fluorescent lamp sources. Benefits Efficacy: up to 162 lm/w Homogeneous light distribution No special connection cable needed Self-cooling Non-SELV module for cost competitive solution Form factor-according Zhaga book 7 CE marks 5 years system warranty in combination with suitable OPTOTRONIC drivers Features Consistent white light of 4 SDCM Poke-in connectors for 0,5mm²wire CRI>80 Beam angle 120 ± 5 [ ] Applications Office (workplace illumination, corridor) Commercials (Indoor car park) Industry (storage, warehouse, retail) Public area (corridor, stairs, subway) Product name CCT (K) Flux (lm) P (W) Tc 55 C lm/w* Tc 55 C Vf (V) If (ma) L70 B50** (h) PL-LIN-HV-650-830-DC-280-G1 3000 564 3.6 154.4 29.2 125 50,000 PL-LIN-HV-650-840-DC-280-G1 4000 591 3.6 162.0 29.2 125 50,000 PL-LIN-HV-650-865-DC-280-G1 6500 564 3.6 154.4 29.2 125 50,000 PL-LIN-HV-1100-830-DC-280-G1 3000 1127 7.3 154.4 58.4 125 50,000 PL-LIN-HV-1100-840-DC-280-G1 4000 1182 7.3 162.0 58.4 125 50,000 PL-LIN-HV-1100-865-DC-280-G1 6500 1127 7.3 154.4 58.4 125 50,000 PL-LIN-HV-1300-830-DC-560-G1 3000 1183 7.6 154.4 61.3 125 50,000 PL-LIN-HV-1300-840-DC-560-G1 4000 1241 7.6 162.0 61.3 125 50,000 PL-LIN-HV-1300-865-DC-560-G1 6500 1183 7.6 154.4 61.3 125 50,000 PL-LIN-HV-2200-830-DC-560-G1 3000 2029 13 154.4 105.1 125 50,000 PL-LIN-HV-2200-840-DC-560-G1 4000 2128 13 162.0 105.1 125 50,000 PL-LIN-HV-2200-865-DC-560-G1 6500 2029 13 154.4 105.1 125 50,000 PrevaLED Linear HV, Ver. 02/2015 Dated 2015-0603 page 1 of 8
Product name CCT (K) Flux (lm) P (W) Tc 55 C lm/w* Tc 55 C Vf (V) If (ma) L70 B50** (h) PL-LIN-HV-650-830-DC-280-G1 3000 742 5.3 139.9 30.3 175 50,000 PL-LIN-HV-650-840-DC-280-G1 4000 778 5.3 146.8 30.3 175 50,000 PL-LIN-HV-650-865-DC-280-G1 6500 742 5.3 139.9 30.3 175 50,000 PL-LIN-HV-1100-830-DC-280-G1 3000 1484 10.5 139.9 60.6 175 50,000 PL-LIN-HV-1100-840-DC-280-G1 4000 1557 10.5 146.8 60.6 175 50,000 PL-LIN-HV-1100-865-DC-280-G1 6500 1484 10.5 139.9 60.6 175 50,000 PL-LIN-HV-1300-830-DC-560-G1 3000 1558 11.0 139.9 63.6 175 50,000 PL-LIN-HV-1300-840-DC-560-G1 4000 1635 11.0 146.8 63.6 175 50,000 PL-LIN-HV-1300-865-DC-560-G1 6500 1558 11.0 139.9 63.6 175 50,000 PL-LIN-HV-2200-830-DC-560-G1 3000 2671 18.9 139.9 109.1 175 50,000 PL-LIN-HV-2200-840-DC-560-G1 4000 2802 18.9 146.8 109.1 175 50,000 PL-LIN-HV-2200-865-DC-560-G1 6500 2671 18.9 139.9 109.1 175 50,000 Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. * Typical value; tolerance for optical and electrical data: +/-10%; Typical values valid for Tp/Tc = 55 C **average Lifetime L70B50 (lumen maintenance) up to 50.000h at Tc = 55 C (Tc point: see the below red mark). Typical current 125mA and 175mA depending on the lumen output requirement. Tuning Information FluxvsTc If vs. Lumen This is simulated based on LED This is simulated based on LED @ Tc=38 @ 4000K 650lm @ 4000K 650lm Average Lifetime (lumen maintenance) over Tc (case temperature)* * Indication only, valid for specified typical current, If = 125mA PrevaLED Linear HV, Ver. 02/2015 Dated 2015-0603 page 2 of 8
Minimum and Maximum Ratings Product Ambient temperature [ C ] Storage temperature [ C ] Tc max.* (@ typ. current) If max (ma) PL-LIN-HV -650-8xx-DC-280-G1-20 45-30 85 75 C 175 PL-LIN-HV -1100-8xx-DC-280-G1-20 45-30 85 75 C 175 PL-LIN-HV -1300-8xx-DC-560-G1-20 45-30 85 75 C 175 PL-LIN-HV -2200-8xx-DC-560-G1-20 45-30 85 75 C 175 The modules are designed for operation with OPTOTRONIC ECG. *) Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the light engine. The temperature of the LED module must be measured at the tc-point according to EN60598-1 in thermally settled conditions with a temperature sensor. LED on-board Optical parameters Product name # LED Pitch (mm) PL-LIN-HV -650-8xx-DC-280-G1 10 28.4 PL-LIN-HV -1100-8xx-DC-280-G1 20 14.0 PL-LIN-HV -1300-8xx-DC-560-G1 21 26.8 PL-LIN-HV -2200-8xx-DC-560-G1 36 15.6 Mechanical Information PLVG1-HV-650-8XX-280-DC PLVG1-HV-1100-8XX-280-DC PrevaLED Linear HV, Ver. 02/2015 Dated 2015-0603 page 3 of 8
PLVG1-HV-1300-8XX-560-DC PLVG1-HV-2200-8XX-560-DC Light distribution Product Distribution Graph Beam angle range 1/2) (2Xθ PL-LIN-HV-XXXX- 8XX-DC-XXX-G1 120 ±5 PrevaLED Linear HV, Ver. 02/2015 Dated 2015-0603 page 4 of 8
System matching combination OT FIT D (constant current driver Non-SELV) type 650lm 1300lm 1100lm 2200lm Luemen output OT FIT 50/220-240/350 D L OT FIT 50/220-240/250 D L OT FIT 30/220-240/125 D L (lm) (4000K as LED voltage (V) current (ma) 52.5W 54-150V 54W 54-216V 27W 54-216V referecenc 210 x 30 x 21mm 210 x 30 x 21mm 210 x 30 x 21mm e) 591 29V 125mA min 2S2P 4 max 6S2P 12 min 2S1P 2 max 7S1P 7 778 30V 175mA min 2S2P 4 max 4S2P 8 1241 61V 125mA min 1S2P 2 max 3S2P 6 min 1S1P 1 max 3S1P 3 1635 63V 175mA min 1S2P 2 max 2S2P 4 1182 58V 125mA min 1S2P 2 max 3S2P 6 min 1S1P 1 max 3S1P 3 1557 60V 175mA min 1S2P 2 max 2S2P 4 2128 104V 125mA min 1S2P 2 max 2S2P 4 min 1S1P 1 max 2S1P 2 2802 108V 175mA min 1S2P 2 max 1S2P 2 * Final release of modularity under evaluation, content table gives indication only Connection Parallel connection Serial connection PrevaLED Linear HV, Ver. 02/2015 Dated 2015-0603 page 5 of 8
Combined serial-parallel connection Safety Information The modules are intended for operation only with matching OPTOTRONIC To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be ENEC certified. In Europe the declarations of conformity must include the following standards: CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384. Also check for the mark of an independent authorized certification institute. Please see the relevant brochure for more detailed information (see "Related and Further Information") OSRAM OPTOTRONIC electronic control gear complies to all relevant standards and guarantees safe operation. The LED module itself and all its components may not be mechanical stressed. Assembly must not damage or destroy conducting paths on the circuit board. To avoid mechanical damage to the connectors, the module should be attached securely to the fixture. Heavy vibration should be avoided. Installation of LED modules with (power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Please ensure that the power supply is of adequate power to operate the total load. Please ensure that the power supply with correct out put parameters (driving mode, voltage, current) for LED module. Pay attention to standard ESD precautions when installing the module. If surge protection structure not within power supplier, a lightening protector should be needed additionally. PrevaLED Linear HV, Ver. 02/2015 Dated 2015-0603 page 6 of 8
Accessories Diffuser installation It has 1 type of opal diffuser that can be match with PrevaLED Linear HV module. Diffuser Dimension : W41 x H30 x L (560/599/1150/1450)mm Material : PC Transmittance > 80% Installation of diffuser Installation: 1. Clip the diffuser into the gap between the mounting surface and screw head. 2. Press the diffuser by pushing it to another side till the clip slide along the gap. 3. Make sure the diffuser clip into the gap and sit on the mounting surface perfectly. Notes Base on the mounting design, the diffuser need to clip into the gap between round screw head and mounting base, so the screw with round head is recommended, flat screw head is difficult to fit it. Screw head diameter range : Ø6.5 ~ Ø8.0. PrevaLED Linear HV, Ver. 02/2015 Dated 2015-0603 page 7 of 8
Ordering codes Product name EAN 10* S-Unit ** PL-LIN-HV-650-830-DC-280-G1 4052899301238 50x1 PL-LIN-HV-650-840-DC-280-G1 4052899301214 50x1 PL-LIN-HV-650-865-DC-280-G1 4052899301191 50x1 PL-LIN-HV-1100-830-DC-280-G1 4052899301177 50x1 PL-LIN-HV-1100-840-DC-280-G1 4052899301153 50x1 PL-LIN-HV-1100-865-DC-280-G1 4052899301139 50x1 PL-LIN-HV-1300-830-DC-560-G1 4052899301115 50x1 PL-LIN-HV-1300-840-DC-560-G1 4052899301092 50x1 PL-LIN-HV-1300-865-DC-560-G1 4052899301078 50x1 PL-LIN-HV-2200-830-DC-560-G1 4052899301054 50x1 PL-LIN-HV-2200-840-DC-560-G1 4052899301030 50x1 PL-LIN-HV-2200-865-DC-560-G1 4052899301016 50x1 Diffuser PREVALED LV DIFFUSER 560 4052899130319 100x1 PREVALED LV DIFFUSER 600 4052899130333 100x1 PREVALED LV DIFFUSER 1150 4052899130357 50x1 PREVALED LV DIFFUSER 1450 4052899130371 50x1 On/Off Driver OT FIT 30/220-240/125 D L 4052899222557 20x1 OT FIT 50/220-240/250 D L 4052899222571 20x1 OT FIT 50/220-240/350 D L 4052899222595 20x1 DALI Driver OTi DALI 60/220-240/550 LT2 L 4052899188662 20x1 OTi DALI 90/220-240/1A0 LT2 L 4008321867568 20x1 CurrentSelection Driver OTi 60/220-240/550 D LT2 L 4052899188419 20x1 OTi 90/220-240/1A0 D LT2 L 4052899188556 20x1 *) EAN10: Ordering number per single PRODUCT **) S-Unit: products per shipping unit Note: Typical performance data are subject to change without any further notice, particularly as LED technology evolves. Sales and Technical Support OSRAM Asia Pacific Management Company 5/F, Hantang Building, Overseas Chinese Town, Shennan Ave, Nan Shan District, 518053, Shenzhen, Guangdong, P.R. China www.osram.asia Sales and technical support is given by the local OSRAM subsidiaries. On our world wide homepage all OSRAM subsidiaries are listed with complete address and phone numbers. PrevaLED Linear HV, Ver. 02/2015 Dated 2015-0603 page 8 of 8