DEUTSCHE NORM January 2004 DIN EN 13698-1 { ICS 55.180.20 Supersedes DIN 15146-2, November 1986 edition. Pallet production specification Part 1: Construction specification for 800 mm 1200 mm flat wooden pallets English version of DIN EN 13698-1 Produktspezifikation für Paletten Teil 1: Herstellung von 800 mm 1200 mm Flachpaletten aus Holz European Standard has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 261 Packaging (Secretariat: France). The responsible German body involved in its preparation was the Normenausschuss Verpackungswesen (Packaging Standards Committee), Technical Committee Paletten. Amendments DIN 15146-2, November 1986 edition, has been superseded by the specifications of EN 13698-1. Previous editions DIN 15146-2: 1959-12, 1969-06, 1970-09, 1983-04, 1986-11. Normen-Download-Beuth-Jungheinrich AG-KdNr.6004049-LfNr.5157853001-2010-12-15 09:13 Normenausschuss Bauwesen (NABau) im DIN No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e.v., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Continued overleaf. Document comprises 25 pages. English price group 14 www.din.de www.beuth.de <_P 05.04 9548974
EN 13698-1 July 2003 ICS 55.180.20 English version Pallet production specification Part 1: Construction specification for 800 mm 1200 mm flat wooden pallets Spécification de produit pour les palettes Partie 1: Spécification de fabrication des palettes en bois, de dimensions 800 mm 1200 mm Produktspezifikation für Paletten Teil 1: Herstellung von 800 mm 1200 mm Flachpaletten aus Holz Normen-Download-Beuth-Jungheinrich AG-KdNr.6004049-LfNr.5157853001-2010-12-15 09:13 This European Standard was approved by CEN on 2003-04-10. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Management Centre: rue de Stassart 36, B-1050 Brussels 2003. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. E
Page 2 2 3 4 4 4 5 5 9 10 16 17 19 21 23 24 24 Normen-Download-Beuth-Jungheinrich AG-KdNr.6004049-LfNr.5157853001-2010-12-15 09:13
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24