Valves & Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Features l Controls cylinder extension and retraction l Allows rapid cylinder return l -Way Normally Closed l Quick Exhaust & Needle Valve options l Male pipe thread for direct mount to single acting spring return cylinders Cylinder Control Bases When used in conjunction with Pneumadyne s 5 mm Valves, these precision machined bases are an ideal choice for applications requiring controlled movement of single-acting spring return cylinders. Configurations featuring a quick exhaust and/or needle valve are available to easily control cylinder extension and retraction speeds. These precision machined valves were designed for use with Pneumadyne s 5 mm Valves (sold separately). Materials Brass/Electroless Nickel, Aluminum/Anodize, Stainless Steel, Buna-N, Urethane Performance Data Temperature Range Operating Pressure Media -0 o to 60 o F 0 to 5 psi Air Product Max. Flow (scfm) C v Fill Time Exhaust 50 psi 5 psi sec/in Time 0-90 psi sec/ in 00-0 psi CCV-F-..6.05.070.0 CCV-F-.8..05.070.0 CCV-F-..6.05.070.0 CCV-F-.8..05.070.0 CCV--.8..05.070.0 Cv per ANSI / (NFPA) T.. Operator: 5 mm WNC solenoid valve Ø.6 mm orifice (sold separately) Five configurations are available to accommodate cylinder extension and retraction requirements: CCV-F- features a 0- (F) input port and /8 NPT output port. Input pressure determines the rate of cylinder extension while the cylinder s spring controls rod retraction. CCV-F- offers the combination of a Needle Valve and Quick Exhaust providing controlled cylinder movement in both directions. A built-in Needle Valve in the input port, 0- (F), controls cylinder extension while the /8 NPT Quick Exhaust in the output port allows rapid cylinder return. CCV-F- provides a 0- (F) input port and built-in Quick Exhaust with /8 NPT output port. Input pressure controls the cylinder extension and the Quick Exhaust allows rapid cylinder return. CCV-F- features a built-in Needle Valve in the input port, 0- (F), for controlled cylinder extension. The cylinder s spring controls rod retraction. CCV-- features /8 NPT (F) input and output ports. A built-in Needle Valve in the input port provides controlled cylinder extension while the cylinder s spring controls rod retraction. 0
PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 CCV-F- CCV-F- CCV-F- (.7).65 (.05).65 (.7) (.57).65.779.5..59 CCV-F- CCV-- Cylinder Control Valve (.05) (.05).65 (.57).65 (.57).779.5.96 Flow Rate (scfm) Cylinder Control Valve Max. Flow vs. Input Pressure 5 0 Cylinder Control Valve Turns vs. Pressure for Needle Valves 5 0 5 50 75 00 5 Input Pressure (psi) CCV-F- CCV-F-,CCV-- CCV-F- & CCV-F- Valves & Accessories.09.9 5 psi Function Applying an electrical signal to the solenoid results in the controlled rod movement determined by the Cylinder Control Base. Product Information Flow Rate (scfm) 0 50 psi 0 5 6 7 8 Turns Open Input Output CCV-F- 0- (F) /8 NPT CCV-F- 0- (F) Needle Valve /8 NPT Quick Exhaust CCV-F- 0- (F) /8 NPT Quick Exhaust CCV-F- 0- (F) Needle Valve /8 NPT CCV-- /8 NPT (F) Needle Valve /8 NPT (F) Ordering Information l To order standard product refer to Product Information listing. l 5 mm Valves sold separately. l Contact factory for custom porting configurations. Ideal for controlling the movement of single-acting spring return cylinders
Valves & Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Features l -way normally closed, -way normally open & -way l Manual override l Balanced spool l Mounting versatility l Lubricated and Nonlubricated air l Several connector options l Low power consumption & Air Pilot Operated & -Way Valves "0" Series The modular design of Pneumadyne's "0" Series provides plumbing convenience and mounting versatility. For installation flexibility, these high flow -way and -way valves are available with a 0- (F) air pilot or a variety of watt 5 mm solenoid operators. Precision machining and an exclusive plating process ensure a long product life and enable the valves to be used with lubricated and non-lubricated air. Materials Aluminum/Anodize, Brass/Electroless Nickel, Buna-N, Stainless Steel, Copper, Nylon-Glass Filled Tested for millions of trouble free cycles Two Body Styles Provide Versatility The unique design of the Universal valve body allows inline or multiple station manifold mounting. When used with Pneumadyne's Universal Manifolds, the 0- (F) cylinder ports are located on the top of the valve body and exhaust flow is directed through /8 NPT (F) ports on the manifold. This configuration is ideal for applications requiring the capture and removal of exhaust flow. The Manifold ported valve body must be used with Pneumadyne's 0 Series standard manifolds. This compact valve package features 0- (F) output ports located on one side of the manifold contributing to a cleaner, faster installation. Positioning the input and output ports on the manifold permits the valve to be changed without disconnecting system plumbing. Speed control valves can be used in the 0- (F) exhaust ports located on top of the valve body, ideal for controlling cylinder speeds from a central location. Pneumatic Performance Data 0 Series Temperature Range 0 o F to 0 o F (-5 C to 50 C)* Operating Pressure C Flow Rate Fill Time Exhaust Time Actuating v (scfm) sec/ in sec/ in Pressure 0-90 psi 00-0 psi (min. psi) 50 psi 5 psi 0-5 psi (0-8.6 bar).5 5.8..0.05 5 Cv per ANSI / (NFPA) T.., *00% Duty Cycled Electrical Performance Data Operator Power Voltages Voltage Response Response Copper Wire Tolerance Time Energize Time De-energize Insulation Class Watt.8 VA.5 VA holding DC, DC 0 50/60Hz Connector wire gauge: AWG -5% to 0% 0 ms ms F F (55 C)
PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 X Ø.9 Thru..6.5.00.6.5 -Way Single Air Pilot.7.96.7.8 X Ø.6 Thru.0.6.00 -Way Single.57.05.5.6 X Ø.6 Thru. 0- Pilot Port.66.6.5.00.00 -Way Single.7.8 X Ø.6 Thru.0. -Way Double.6.5.8..78.6 X Ø.6 Thru.66..6.5 X Ø.9 Thru..56 X Ø.6 Thru.6 0- Pilot Port..00.66.07 0 Series Valves -Way Double Air Pilot.8.6 l Drawings illustrate selected valve body dimensions, additional drawings available. When design makes a dimension critical- contact factory for confirmation. All measurements in inches, unless otherwise specified and are subject to change without notice. 0- Pilot Port Valves & Accessories Body U=Universal M=Manifold Product Number Diagram 0 Series S0U0-SS--0 Function 0= WNC = WNO = -Way 5 Port Position Voltage = V DC = V DC = 0 AC Operator SS= Single DS= Double AP= Single Air Pilot DP= Double Air Pilot Connectors 0= Spade = Flying Leads 00 mm = Line Connector w/led = 90 Connector w/led Example: Universal body, WNC, Single, 0 AC, Spade Connector PneuTef Lightweight aluminum spools and thin profile seals enhance valve speed and ensure low breakaway. An exclusive PTFE impregnated surface results in a smooth, slippery finish extending product life. For Lubricated and Non-Lubricated Air
Valves & Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 0 Series Flow Chart Flow Rate (scfm) 0 8 6 0 0 5 50 75 00 5 Input Pressure (psi) Product Information 0 Series -Way Normally Closed Universal Body/ Single Connection 0V AC /.8 VA / Orifice./. mm S0U0-SS--0 Spade S0U0-SS-- Flying Leads S0U0-SS-- Line Connector S0U0-SS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0U0-SS--0 Spade S0U0-SS-- Flying Leads S0U0-SS-- Line Connector S0U0-SS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0U0-SS--0 Spade S0U0-SS-- Flying Leads S0U0-SS-- Line Connector S0U0-SS-- 90 Connector -Way Normally Open Universal Body/ Single Connection 0V AC /.8 VA / Orifice./. mm S0U-SS--0 Spade S0U-SS-- Flying Leads S0U-SS-- Line Connector S0U-SS-- 90 Connector V DC /. Watt / Orifice./. mm S0U-SS--0 Spade S0U-SS-- Flying Leads S0U-SS-- Line Connector S0U-SS-- 90 Connector V DC /. Watt / Orifice./. mm S0U-SS--0 Spade S0U-SS-- Flying Leads S0U-SS-- Line Connector S0U-SS-- 90 Connector Universal style valves are designed for single mounting or multiple station manifold mounting Product Information 0 Series Air Pilot Operated Universal Body Function S0U0-AP WNC S0U-AP WNO S0U-AP -Way, Air Pilot S0U-DP -Way, Double Air Pilot Air Pilot Operated Manifold Body Function S0M0-AP WNC S0M-AP WNO S0M-AP -Way, Air Pilot S0M-DP -Way, Double Air Pilot -Way Normally Closed Manifold Body/ Single Connection 0V AC /.8 VA / Orifice./. mm S0M0-SS--0 Spade S0M0-SS-- Flying Leads S0M0-SS-- Line Connector S0M0-SS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0M0-SS--0 Spade S0M0-SS-- Flying Leads S0M0-SS-- Line Connector S0M0-SS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0M0-SS--0 Spade S0M0-SS-- Flying Leads S0M0-SS-- Line Connector S0M0-SS-- 90 Connector -Way Normally Open Manifold Body/ Single Connection 0V AC /.8 VA / Orifice./. mm S0M-SS--0 Spade S0M-SS-- Flying Leads S0M-SS-- Line Connector S0M-SS-- 90 Connector V DC /. Watt / Orifice./. mm S0M-SS--0 Spade S0M-SS-- Flying Leads S0M-SS-- Line Connector S0M-SS-- 90 Connector V DC /. Watt / Orifice./. mm S0M-SS--0 Spade S0M-SS-- Flying Leads S0M-SS-- Line Connector S0M-SS-- 90 Connector Choose from & Volt DC & 0 Volt AC to accommodate most applications. Other voltages available on special order- contact factory
PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Product Information 0 Series -Way 5 Port Position Universal Body/ Single Connection 0V AC /.8 VA / Orifice./. mm S0U-SS--0 Spade S0U-SS-- Flying Leads S0U-SS-- Line Connector S0U-SS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0U-SS--0 Spade S0U-SS-- Flying Leads S0U-SS-- Line Connector S0U-SS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0U-SS--0 Spade S0U-SS-- Flying Leads S0U-SS-- Line Connector S0U-SS-- 90 Connector -Way 5 Port Position Universal Body/ Double Connection 0V AC /.8 VA / Orifice./. mm S0U-DS--0 Spade S0U-DS-- Flying Leads S0U-DS-- Line Connector S0U-DS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0U-DS--0 Spade S0U-DS-- Flying Leads S0U-DS-- Line Connector S0U-DS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0U-DS--0 Spade S0U-DS-- Flying Leads S0U-DS-- Line Connector S0U-DS-- 90 Connector Valves & Accessories -Way 5 Port Position Manifold Body/Single Connection 0V AC /.8 VA / Orifice./. mm S0M-SS--0 Spade S0M-SS-- Flying Leads S0M-SS-- Line Connector S0M-SS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0M-SS--0 Spade S0M-SS-- Flying Leads S0M-SS-- Line Connector S0M-SS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0M-SS--0 Spade S0M-SS-- Flying Leads S0M-SS-- Line Connector S0M-SS-- 90 Connector Accessories SMMC-00 Plug-in Cable 00 mm SMMC-500 Plug-in Cable 500 mm SMMC-000 Plug-in Cable 000 mm SMM-DIN DIN Connector SMM-MDIN Molded DIN Connector -Way 5 Port Position Manifold Body/ Double Connection 0V AC /.8 VA / Orifice./. mm S0M-DS--0 Spade S0M-DS-- Flying Leads S0M-DS-- Line Connector S0M-DS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0M-DS--0 Spade S0M-DS-- Flying Leads S0M-DS-- Line Connector S0M-DS-- 90 Connector V DC / Watt / Orifice 0.8/. mm S0M-DS--0 Spade S0M-DS-- Flying Leads S0M-DS-- Line Connector S0M-DS-- 90 Connector Output ports are located on one side of the standard manifold for a cleaner, faster installation 00 mm Plug-in Cable included with Line and 90 Connector Ordering Information l To order standard product refer to Product Information listing. l 00 mm Plug-in cable included with valves featuring the Line or 90 Connector. 5
Valves & Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Features l to 0 station l Clear anodized aluminum for corrosion resistance l Convenient junction point l Precision machined l Lightweight 0 Series Manifolds Precision machined aluminum manifolds are a compact, cost effective method of mounting multiple "0" Series valves. The versatile design allows & -way valves to be combined on the same manifold. Choose from two to 0-stations to accommodate application requirements. Two styles of manifolds are available to compliment the "0" Series Universal and Manifold valve bodies. Be sure to select the correct product grouping when ordering valves and manifolds. All manifolds are anodized for corrosion resistance. Cover plates are available to conceal unused stations and block the valve supply port. Performance Data Temperature Range -0 F to 00 F / - C to 9 C Materials Aluminum, Clear Anodize Port Designation Universal Standard Pressure /8 NPT (F) /8 NPT (F) Output 0- (F) 0- (F) top of valve body Exhaust /8 NPT (F) 0- (F) top of valve body We design custom products to meet your application needs Ordering Information l To order standard product refer to Product Information listing. l Contact factory for custom colors. l Cover Plates available to conceal unused stations. l O-rings and mounting screws included with manifolds. 6
PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Universal /8 NPT (F) Pressure and Exhaust ports.8 X Ø.77 Thru A.7 B.8.50 0 Series Manifold.5.6.7.7 6X /8 NPT S0MU- Product Information 0 Series Manifolds Universal (for Universal Valve Body) Stations A B S0MU-.57.65 S0MU-.87.95 S0MU-6 6.7 5.5 S0MU-8 8 5.7 6.55 S0MU-0 0 6.77 7.85 Standard (for Manifold Valve Body) Stations A B S0MM-.57.65 S0MM-.87.95 S0MM-6 6.7 5.5 S0MM-8 8 5.7 6.55 S0MM-0 0 6.77 7.85 Valves & Accessories Standard /8 NPT (F) Pressure port 0- Output ports X Ø.77 Thru Accessory S0M-CP Description Cover plate.8.7 A B.7.5.99.5.65.0.85.50 /8 NPT Input ports S0MM- Cylinder speeds are easily controlled by using speed control valves in the exhaust ports on top of the valve body l All measurements in inches, unless otherwise specified. When design makes a dimension critical- contact factory for confirmation. All dimensions shown subject to change without notice. 0 Series manifolds are designed for use with specific valves. Be sure to select the correct product grouping when ordering valves & manifolds 7
Valves & Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Features l -Position -way valves feature closed and exhaust centers l High flow rate l /8 NPT (F) ports l Balanced spool l Low power consumption l Lubricated and nonlubricated air & Air Pilot Operated & -Way Valves "" Series Pneumadyne's new "" Series offers high flow -way and - way configurations with /8 NPT (F) ports. In addition to the standard -Position -way, the "" Series also features - Position -way valves with Closed or Exhaust centers to satisfy system requirements. For installation flexibility, single or double air pilot and solenoid operators are available to shift the valve. Pneumadyne's Watt, 5 mm solenoid valves present a variety of voltage and connector options. Unique to the "" Series, our Latching can replace two solenoid valves in a -way, -Position "double solenoid" configuration; an energy and space saving option. Materials Aluminum/Anodize, Brass/Electroless Nickel, Buna-N, Stainless Steel, Copper, Nylon - Glass Filled The design of the Universal valve body allows inline or multiple station manifold mounting. When used with Pneumadyne's "" Series Manifolds, the /8 NPT (F) cylinder ports are located on the top of the valve body and exhaust flow is directed through /8 NPT (F) ports on the manifold. This configuration is ideal for applications requiring the capture and removal of exhaust flow. Precision machining and our exclusive PneuTef plating process ensure a long product life and enable the valves to be used with lubricated and non-lubricated air. Pneumatic Performance Data Series Temperature Range Operating Pressure Function -Way Normally Closed -Way 5 Port Position -Way 5 Port Position C v Flow Rate (scfm) 50 psi 5 psi 0 o F to 0 o F (-5 C to 50 C)* 0 to 5 psi Fill Time sec/ in 0-90 psi Exhaust Time sec/ in 00-0 psi Actuating Pressure (psi) 0. 7 0 0.007 0.08 0 0. 7 0 0.008 0.08 0 0. 6 5 0.008 0.05 0 Cv per ANSI / (NFPA) T.., *00% Duty Cycled Electrical Performance Data Operator Voltage Tolerance -5% to 0% Response Time Energize 0 ms Connector wire gauge: AWG Response Time De-energize Copper Wire Insulation Class ms F F (55 C) 8
PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057.75.5.58.9.75.58.9 X /8 NPT Ports..9.8.6. X Ø.7 Thru X Ø.5 Thru X Ø.5 Thru 0- Pilot Port X Ø.7 Thru SU0-SS-XX-X X /8 NPT Ports..9.5.70.75.58.9.5 5X /8 NPT Ports.86 X Ø.7 Thru.75.58.9.6.66..6 5 SU-SS-XX-X 5X /8 NPT Ports.86 X Ø.5 Thru X Ø.5 Thru 0- Pilot Port X Ø.7 Thru 5.6.5.70.75.58.9.5.75.58 0- Pilot Port.9 5X /8 NPT Ports.0.68.08 X Ø.7 Thru 5X /8 NPT Ports X Ø.5 Thru X Ø.5 Thru 0- Pilot Port X Ø.7 Thru 5 Series Valves.80.00.67.6 5 SU-DS-XX-X.5.70 Valves & Accessories.8.6..6.56.6.00.5.75 SU0-AP SU-AP SU-DP Product Number Diagram Series SUC-DS--0.75.59.9 5X /8 NPT Ports.96.56.76..6 X Ø.5 Thru.5.7 Body U=Universal Function 0= -Way Normally Closed = -Way Position C= -Way Closed Center E= -Way Exhaust Center Voltage = V DC = V DC =0 AC Operator SS= Single DS= Double AP= Single Air Pilot DP= Double Air Pilot LS= Latching Connectors 0= Spade = Flying Leads 00 mm = Line Connector w/led = 90 Connector w/led Example: Universal, -Way Closed Center, Double, V DC, Spade X Ø.7 Thru SUC-DS-XX-X SUE-DS-XX-X l Closed Center Valves Caution: Vent working lines before disconnecting.6.58 9
Valves & Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Product Information Series -Way Normally Closed Single Connection Air Pilot SU0-AP Air Pilot 0 AC.8 VA/ Orifice./. mm SU0-SS--0 Spade SU0-SS-- Flying Leads SU0-SS-- Line Connector SU0-SS-- 90 Connector DC Watt/ Orifice 0.8/. mm SU0-SS--0 Spade SU0-SS-- Flying Leads SU0-SS-- Line Connector SU0-SS-- 90 Connector DC Watt/ Orifice 0.8/. mm SU0-SS--0 Spade SU0-SS-- Flying Leads SU0-SS-- Line Connector SU0-SS-- 90 Connector -Way 5 Port Position Double Connection Air Pilot SU-AP Air Pilot SU-DP Air Pilot 0 AC.8 VA/ Orifice./. mm SU-DS--0 Spade SU-DS-- Flying Leads SU-DS-- Line Connector SU-DS-- 90 Connector DC Watt/ Orifice 0.8/. mm SU-DS--0 Spade SU-DS-- Flying Leads SU-DS-- Line Connector SU-DS-- 90 Connector DC Watt/ Orifice 0.8/. mm SU-DS--0 Spade SU-DS-- Flying Leads SU-DS-- Line Connector SU-DS-- 90 Connector Our exclusive seal material accommodates low temperature applications. Contact factory for additional information -Way 5 Port Position Single Connection 0 AC.8 VA/ Orifice./. mm SU-SS--0 Spade SU-SS-- Flying Leads SU-SS-- Line Connector SU-SS-- 90 Connector DC Watt/ Orifice 0.8/. mm SU-SS--0 Spade SU-SS-- Flying Leads SU-SS-- Line Connector SU-SS-- 90 Connector DC Watt/ Orifice 0.8/. mm SU-SS--0 Spade SU-SS-- Flying Leads SU-SS-- Line Connector SU-SS-- 90 Connector -Way 5 Port Position Latching Single Connection DC Watt/ Orifice./. mm SU-LS-- Flying Leads DC Watt/ Orifice./. mm SU-LS-- Flying Leads -Way 5 Port Position Double - Closed Center Connection 0 AC.8 VA/ Orifice./. mm SUC-DS--0 Spade SUC-DS-- Flying Leads SUC-DS-- Line Connector SUC-DS-- 90 Connector DC Watt/ Orifice 0.8/. mm SUC-DS--0 Spade SUC-DS-- Flying Leads SUC-DS-- Line Connector SUC-DS-- 90 Connector DC Watt/ Orifice 0.8/. mm SUC-DS--0 Spade SUC-DS-- Flying Leads SUC-DS-- Line Connector SUC-DS-- 90 Connector -Way 5 Port Position Double - Exhaust Center Connection 0 AC.8 VA/ Orifice./. mm SUE-DS--0 Spade SUE-DS-- Flying Leads SUE-DS-- Line Connector SUE-DS-- 90 Connector DC Watt/ Orifice 0.8/. mm SUE-DS--0 Spade SUE-DS-- Flying Leads SUE-DS-- Line Connector SUE-DS-- 90 Connector DC Watt/ Orifice 0.8/. mm SUE-DS--0 Spade SUE-DS-- Flying Leads SUE-DS-- Line Connector SUE-DS-- 90 Connector Closed Center: All ports are blocked. Caution: vent working lines before disconnection Exhaust Center: Input ports are blocked, cylinder ports are open to exhaust PneuTef Lightweight aluminum spools and thin profile seals enhance valve speed and ensure low breakaway. An exclusive PTFE impregnated surface results in a smooth, slippery finish extending product life. Can be used with Lubricated and Non-Lubricated Air 0
PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Universal /8 NPT (F) Pressure and Exhaust ports.75 X.8 Thru..6.50 A.75 B.50 Series Manifold Product Information..50. 6X /8 NPT SMU-.99 Series Manifolds Stations A B SMU-.9.9 SMU-.6.6 SMU-6 6 5.0 6.0 SMU-8 8 6.56 7.56 SMU-0 0 8. 9. measurements in inches Series Accessories SM-CP SMMC-00 SMMC-500 Cover Plate Plug-in Cable 00 mm Plug-in Cable 500 mm SMMC-000 Plug-in Cable 000 mm SMM-DIN SMM-MDIN DIN Connector Molded DIN Cable M Valves & Accessories Unique to Pneumadyne's "" Series Latching Operator l Single electrical connection l Space saving l -wire systemrelay not required l Momentary pulse to energize and deenergize l Power savings- do not need to maintain electrical connection The Latching can replace two solenoid valves in a -way, -Position "double solenoid" configuration l Ideal for applications where power is limited or coil heating is unwanted Cover Plate- (SM-CP Sold Separately) includes mounting screws. Ordering Information l To order standard product refer to Product Information listing. l Cover Plates available for use with manifolds. l Mounting screws provided. l 00 mm Plug-in cable included with valves featuring the Line or 90 Connector.