James G. Murphy Inc. PUBLIC AUCTION Closing Wallowa Mill Sawmill Equipment & Rolling Stock 9am -Wednesday - May 26 Preview 8-4, Tuesday, May 25 or by Appointment 75100 Lower Diamond Road Wallowa, OR 97885 425-486-1246 503-463-4444 Toll Free 1 800-426-3008 www.murphyauction.com
Wallowa Forest Products Wallowa, OR Debarker MORBARK NW dual stationary head rosserhead debarker w/canted spike rolls, 100 hp drive, FAC 60 hp hydraulic unit, 18 paddle chain infeed log haul w/hydraulic drive, 25 H110 outfeed log haul w/4-arm kicker, motor to FALK, s/n: 127 Whole Log Cut Off Saws L&M 6 bar type whole log cut off saw, 25 hp, log clamp & stops 66 insert tooth whole log cut off saw, 75 hp, w/(3) spare saws 54 insert tooth whole log cut off saw, 75 hp, w/(2) spare saws Step Feeders (2) 1997 ALOHA MACHINERY 14 x20 hydraulic 5-step feeders w/60 hp hydraulic unit, job #2095 Headrig Bandmill KLAMATH 7 style B right hand double cut headrig bandmill, WEG 300 hp/890 rpm AC motor, mechanical strain, feed through rollcase w/(6) 9 x36 rolls, drives, operators cab w/contents Resaw SALEM 6 single horizontal band resaw, AC 150 hp/1180 rpm arbor drive, air strain, powered knurled feed thru rolls, 8 powered infeed rollcase, 4 powered outfeed rollcase, R9-19-38-80, (4) spare COUGAR CUT TECHNOLOGIES 8 x33 2 x.068 gauge resaw bands (new in crate) Carriage-Drive-Log Turner SALEM style 42 x10 2-knee Temposonic positioned carriage, 66 center to center of knees, log dogs, (2) trucks, pantograph, rail, (2) AUTO QUIP shock absorbers, 90 of 90 lb rail SERING/TYRONE BERRY style 100 hp hydraulic carriage drive w/drum SERING 42 hydraulic log turner w/hydraulic unit Twin End Dogger with Scanner/Optimizer MAXI-MILL twin end dogging system, w/48 saws, large log side up to 54 saws, system capacities: 4-26 diameter x 6-10 length, large log side w/(2) 48 movable saws, (2) TOSHIBA 150 hp motors, 4-knife bottom slabbing head, 75 hp, (2) 28 5-key knife type Temposonic positioned slabbing heads, small log side has (2) 48 saws w/(2) 125 hp motors, 4-knife bottom slabbing head (no side slabbing motors), GENCO 20 hp/1200 rpm DC motor to SKK 84 rpm reducer charger drives, (3) JOE scanner heads JS-20-03 w/(2) lasers per head mounted on large log side at 0-1 -8 & 9, log skewing chains & lift arms (no scanning on small log side), infeed log hauls & rollcases, outfeed transfer belts, ALLEN BRADLEY 50 hp DC drive, AB PLC 5/20, computer, control booth w/ controls & electrics, FAC 30 hp hydraulic unit, (38) spare 48 saws Look for additional photos on our website: www.murphyauction.com
Edgers-Optimizer 2001 SALEM 2 x30 top splined arbor edger w/temposonic positioned 4-saw setworks, TOSHIBA 200 hp arbor drive, key knife chipper head w/200 hp arbor drive, RELIANCE 30 hp w/sew reducer feed roll drive, knurled feed through rolls, (4) press rolls, SALEM/ALEMITE lube system, 25 & 30 hp hydraulic units, CUTLER HAMMER 7-section MCC w/(1) 150 hp & (2) 200 hp starters, ALLEN BRADLEY 1336 Plus II 30 hp sensorless vector drive, SALEM Temposonic positioned infeed table w/feed chains & press rolls, 12 4-strand 81X chain scanner infeed table w/board hooks & pin stops, 9 x54 canted even end rollcase, 12 4-strand unscrambler w/hydraulic drive, 30 x10 & 30 x22 outfeed belts w/9-finger edger picker system, s/n: 192284.01 2001 INOVEC WANEMASTER optimizer system, 10 capacity, 12 pass, (5) DYNAVSION M6-17-12 lasers, s/n: M0311606 SCHURMAN 4 x42 cant edger w/keyed arbor, TOSHIBA 300 hp/1780 rpm arbor drive motor, press rolls, knurled feed thru rolls, (5) LASER BLAZERS, 7 powered infeed rollcase, 48 x10 outfeed belt SCHURMAN 4 x36 board edger w/keyed arbor, TOSHIBA approx 150 hp arbor drive, 7 powered infeed rollcase, 48 x24 outfeed belt Planer-Pineapple Feed Table-Anti Stain System-Slowdown Belt COASTAL 16-knife, 6 x8 4-head stud planer w/80 hp top, 40 hp bottom, 40 hp & 60 hp side heads, in & outfeed rolls w/siemens MIDI-MASTER VECTOR 30 hp sensorless drives, AB BULLETIN 1336 dynamic brakes, (4) spare side heads, parts, s/n: CM275-106 COASTAL 20 hydraulic single pineapple feed bridge table w/(2) 12 x30 canted spiral rolls, (2) 12 x30 smooth rolls, (2) 12 x14 knurled & (2) 12 x14 smooth rolls, GE 20 hp/1180 rpm drive, GENCO 20 hp MG set, dual pump 20 hp hydraulic unit, spare pineapple & rolls TDS TECHNOLOGIES custom built anti-stain tunnel w/tds TECHNOLOGIES tank & controls, SWECO screen, AP AURORA & ROSEDALE centrifugal pumps, LMI metering pumps, SEA METRICS flow meter 4 x10 slowdown belt,baldor 7.5 hp, to NORD 591 rpm reducer Stud Stackers LSI & ALOHA MACHINERY hydraulic 9 over end stud stackers w/69 & 72 2-arm lumber lowering hoists, (3) sticker magazine racks, 3/4 x1-1/2 x58 stickers, (2) lumber dealing arms, 11 & 16 2-strand 81X infeed transfers, 12 4-strand unscramblers, 24 2-strand 81X outfeed transfers, 20 hp hydraulic units (stud mill) SIMPLE SIMON 7-10 hydraulic stud stacker, (2) sticker magazines fits 3/4 x1-1/2 x58 stickers up to 60 package, 14 powered outfeed rollcase w/7 x51-1/2, 17 2-strand infeed transfer, 25 hp hydraulic unit (planer) Banding Stations SIMPLE SIMON banding station w/top & side squeeze chute, 18 hydraulic infeed rollcase w/(7) 7 x51-1/2 rolls, 46 powered outfeed rollcase w/(14) 7 x51-1/2 rolls, gearhead motor, 7.5 hp hydraulic unit Hog JEFFREY 5W5 (55WB) hammer hog, AC 400 hp/1180 rpm, 160 lb super hammers, top infeed, bottom outfeed, WESTINGHOUSE 400 hp starter w/800 amp adjustable trip breaker, s/n: 10819 Chippers PRECISION 66-18 chipper, 6-knives, WESTINGHOUSE 200 hp/710 rpm, horizontal infeed, bottom outfeed, s/n: C3271 PRECISION 58-15 chipper, 6-knives, WEG 150 hp/890 rpm, horizontal infeed, bottom outfeed, s/n: C1645 (stud mill) BUSH CHIP MASTER 54A6K chipper, 6-knives, TOSHIBA 150 hp/1160 rpm, horizontal infeed, top discharge, s/n: 74.8.26 (planer)
Bins-Surge Bin-Cylones-Wig Wag-Piping (3) PEERLESS 30-unit hydraulic chip bins PEERLESS 30-unit hydraulic hog fuel bin PEERLESS 30-unit hydraulic shavings bin 11 L x 14 W x 20 H dual 14 auger live bottom surge bin (2) 8, (2) 6 cyclones WIG WAG single station rail car loader w/bypass diverter, CP200 rail car winch, high pressure blowpipe Large quantity of high or low pressure blowpipe Chip Screens BUSH ROTO FLOW BS88, 8 x8 3-deck chip screen, s/n: 0974 (stud mill) BUSH ROTO FLOW 66, 6 x6 3-deck chip screen, s/n: C97407 (planer) Vibratory Conveyors-Metal Detectors PRECISION 18 x21 paddle type vibratory conveyor w/5 fiberglass trough (stud mill) CARRIER 18 x20 paddle type vibratory conveyor w/5 fiberglass trough (planer) MDF CR85 metal detector w/44 coil, s/n: 950321 MDF CR85 metal detector w/36 coil, s/n: M2-0216 Compressor-Dryer-Air Receiver-Tanner Tank QNW 1250A rotary screw compressor, 300 hp, s/n: 70563, w/asea 300 hp starter VAN AIR 42 deliquescent dryer, s/n: 98082 4 x10 air receiver FROSTO tanner tank Blowers-Feeders-Silencers (2) WESTERN PNEUMATICS 721-4500 high pressure blower, 7 x21, 100 hp, s/n: 316632 SUTORBILT style 8 x14 high pressure blower, 75 hp Approx 60 diameter planer blower, LINCOLN 200 hp 2004 WESTERN PNEUMATICS chip feeder, CCW, s/n: FDS885, gearhead motor RADER 25 x30 chip feeder w/motor to shaft mounted reducer, s/n: 3669 RADER 24 x30 chip feeder, CCW w/motor to shaft mounted reducer RADER 20 x20 chip feeder w/gearhead motor RADER 36 x84 silencer STODDARD D32T-10 silencer, 30 x84, s/n: 90-881-D STODDARD L61H-10 silencer, 24 x72, s/n: 90-881-D KITTELL 0080 silencer, 24 x60, s/n: BRU10 KITTELL 0141 silencer, 20 x60, s/n: BRU08 Low & High Pressure Boiler System FEDERAL FLR5464, 15 lb low pressure wood fired water tube type boiler, 595 hp, 19,924 mbh, 64,454 sq ft steam, 15,469 net steam mbh, 2976 sq ft heating surface, 390 cu ft boiler single fuel cell furnace, PACE approx 36 FD fan & 24 ID fans, 35 multi-cone ash collector, s/n: 6741BP WICKES/WELLONS 200 lb high pressure wood fired water tube type boiler Single fuel cell w/new refractory, PAC 5FSIC3 FD fan, PACE 7AF-SWSI ID fan, 35 multi-cone ash collector, order #61653-3, both boilers share WELLONS A-19-50 fuel silo w/dual bottom metering augers, approx 24 diameter x 40 high, 2004 WELLONS controls w/siemens SIMATIC touch screens, HAUS CLEVELAND opacity monitoring, AB POWERFLEX 70 drive on metering bin auger, main fuel conveyor, feed water tanks & pumps, compressor, original controls, GE 8000 line MCC, approx 32 H x 54 W x 35 L all steel boiler building
Kilns-Drying Sheds-Rail-Carts-Stickers (3) WELLONS 32 W x 84 L aluminum double track steam fired dry kilns, 72 aluminum fans, TOSHIBA 7.5 hp/900 rpm, 4 kiln fin pipe, FISHER valves (kiln controls & electrics not complete), 10 x100 control house, spare kiln coils (3) 16 H x 30 W x 52 L wood frame dry sheds w/metal roofs Approx 3200 of kiln rail bolted w/plates Approx (96) square tube kiln carts, 62 x72 center to center on wheels, 96 x120 overall Approx (34) square tube kiln carts, 30 x72 center to center on wheels, 46 x120 overall Approx (100) bundles of 3/4 x1-1/2 x58 laminated stickers (11) Lumber carts Tilt Hoist-P.E.T.-Hula Saw-Swede 2-arm mechanical tilt hoist w/4 between arms, 63 long x 72 travel, STERLING 15 hp, w/brake to FALK 68 rpm reducer Precision end trimmer, 7-10 capacity w/22 saws, approx 5 hp/3500 rpm motors, even end rollcase, 6 & 8 2-strand lugged feed thru transfers, (2) CLAUSSEN lumber grade stamps, 18 x13 clean out conveyor, controls 6 Hula saw trim station w/18 saws, 5 hp/3500 rpm, gravity rolls, powered outfeed belt SALEM 16 lumber swede, s/n: 7564017 Filing-Grinding Room Equipment ARMSTRONG #6 right hand bandsaw sharpener, s/n: 9245 ARMSTRONG #4 right hand bandsaw sharpener w/strong arm, s/n: 14884 ARMSTRONG #6 stretcher roll, s/n: 6741 ARMSTRONG 3-60 stretcher roll, s/n: 10953 ARMSTRONG #85 auto tipper, s/n: 16729 (2) ARMSTRONG #25 circle saw sharpeners, s/n s: 16117, 14002 WRIGHT W150HDB topper/facer, s/n: C9908 IMW 380 side grinder Facer/side grinder ARMSTRONG #54 hand gummer, s/n: 12245 ACME tall hand gummer, s/n: 5373 HANCHETTE size E60 hydraulic travel bed grinder, s/n: GK1490 JEFFER JF-200 travel bed profile grinder 3-3/4 x44 round saw anvil w/setting stand 4-3/4 x16 round saw anvil 3-3/4 x14 round saw anvil Saw setting stand; babbit milling machine; babbit pouring press, mold & jigs, travel bed grinder; (2) ARMSTRONG 5242 swagers; (3) shapers; SIMONDS chipper knives; grinding wheels; jockey grinder; (4) COUGAR CUT TECH 8 x33 2 x.068 gauge resaws (new in crate); (3) 66 round saws; (2) 54 insert tooth round saws; (38) 48 round saws; spare single & double cut bandsaws; STARRETT 4 x18 granite plate Log Decks & Hauls-Transfers-Conveyors-Rollcases 32 5-strand HD84 log deck w/6-arm LS&L, S-drive, GE 10 hp, to FALK 68 rpm reducer 28 3-strand H132 log deck, GE 40 hp, to WESTINGHOUSE 68 rpm reducer 16 8-strand HD log deck, INDUSTRIAL ELECTRIC 200 hp, to FALK 37 rpm reducer 41 6 x12 log haul w/4-arm LS&L, INDUSTRIAL ELECTRIC 10 hp/90 rpm 30 6 x12 log haul w/skk 7.5 hp/40 rpm gearhead motor 30 6 x12 log haul w/baldor 10 hp, to FALK 45 rpm reducer 24 6 x12 log haul w/weaver 5 hp, to FALk 45 rpm reducer Numerous transfers to 66, conveyors to 88, rollcases to 24, motors to 400 hp Look for additional photos on our website: www.murphyauction.com
Electrical WESTINGHOUSE 200 amp main w/(1) 1600, (2) 1200, (2) 1000, (1) 800 amp adjustable trip breakers CH UNITROL 9-section MCC w/(38) switches, 300 & 200 hp starters CH UNITROL 6-section MCC w/(27) switches, WESTINGHOUSE 1200 amp adjustable trip breaker CH UNITROL 6-section MCC w/(22) switches CH UNITROL 6-section MCC w/(20) switches, 200 hp starter CH UNITROL 6-section MCC w/(19) switches CH UNITROL 5-section MCC w/(24) switches CH UNITROL 5-section MCC w/(13) switches WESTINGHOUSE 5 STAR 5-section MCC w/(12) switches, 400 hp starter CH UNITROL 5-section MCC w/(7) switches, size 6 starter, WESTINGHOUSE 400 amp breaker CH UNITROL 4-section MCC w/(9) switches CH UNITROL 4-section MCC w/(7) switches CH UNITROL 3-section MCC w/(8) switches CH UNITROL 2-section MCC w/(6) switches ALLEN BRADLEY Bulletin 150 SMC, 250 hp ALLEN BRADLEY 1336 Plus II sensorless vector drive ALLEN BRADLEY POWERFLEX 70 drive SAFTRONICS SAF DC-12-175-4 solid state drive ALLEN BRADLEY 50 hp drive (2) SAFTRONICS GPS variable speed drives ALLEN BRADLEY SLC s & PLS s Motors to 400 hp; gearheads; reducers; spare electrical stores; transformers to 50 kva; lights; heaters; large wire & conduit lot Sawmill Building Approx 25,000 sq ft irregular shape, all steel sawmill building Miscellaneous (2) 10 x20 I-beam framed log bunks; hydraulic units to 100 hp; SINKER DAVIS 12 sticker machine w/lincoln 40 hp motor; (3) SIGNODE VT16 banders; (6) SIGNODE AM58 banders; (3) SIGNODE 90 psi banders; (5) SIGNODE banding carts; SIGNODE PS119 strapping dispenser; (2) SIGNODE DP23 dispensers; plastic & steel banding; 58AMT clips; WAGNER L712 stack probe moisture meter; (2) WAGNER L612 moisture meters; WAGNER L601-3 moisture meter; (2) calibrating blocks; (3) 600,000, (2) 400,000 & (12) 150,000 btu shop heaters; pallet jack; IDEAL ARC 250 amp welder; GRACO 250-530 pump; 6 pipe vise; double end grinder; eye wash station; intercoms; engine hoist; barrel dolly; barrel pump; fuel & oil tanks; lasers; ladders; clean up tools; safety equipment; heaters; lights; much more! Look for additional photos on our website: www.murphyauction.com
Rolling Stock PLYMOUTH diesel locomotive, circa 1912-1915 patent dates on controls, wood trusses & doors in cab, CAT D342 6-cylinder turbo diesel engine, PONY motor, TWIN CITY CF-10051 oil converter, GARDNER DENVER compressor, swing out seats, front & rear couplers NORTHWEST 800 crane w/50 boom, log grapples, 40 ton capacity, MURPHY MP21-19811, 6-cylinder engine, 30 tracks, s/n: 19526 CAT 235 heel boom log loader, CAT diesel engine, PIERCE PHLB5758 boom, swivel grapple, s/n: HLB3042HP, 30 triple grouser tracks, s/n: 32K02665 ALLIS CHALMERS HD6G tractor, s/n: 11719 w/ TS-6 Tracto shovel, 6-1/2 bucket, s/n: 7355, 13 triple grouser tracks, 7-pin drawbar CAT 966C rubber tire log loader w/medford pole forks, CAT diesel, 23.5-25 tires, s/n: 76J12710 THUNDERBIRD 940BC log loader, s/n: L9426 HYSTER H200H forklift, 20,000 lb capacity, PERKINS diesel, 182-1/2 2-stage clear view mast, dual pneumatic tires, 60 forks, s/n: C007P04277C HYSTER H180H forklift, 18,000 lb capacity, PERKINS diesel, 212-1/2 2-stage clear view mast, side shift, dual pneumatic tires, 60 forks, s/n: C007P2649Z CLARK C500-Y180 forklift, 18,000 lb capacity, PERKINS diesel, 210 2-stage clear view mast, side shift, dual pneumatic tires, 48 forks, s/n: Y1625-31-4950 CLARK approx 18,000 lb forklift CAT T80DSTR forklift, 8000 lb capacity, propane, 170 3-stage mast, side shift, solid tires, 48 forks, s/n: 5KB01422 FORD 850 Super Duty T/A dump truck, 222 hp V8 gas, TRANSMATIC auto transmission, PTO, 10.00-20 tires, 215,430 miles TERMS & CONDITIONS 10% BUYERS PREMIUM PAYMENT: Full payment must be made by no later than 4pm, Thursday, May 27. A 25% deposit is required by the close of business, auction day. Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee. Absentee bids accepted with 25% deposit REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. Removal schedule announced on auction day. Announcements made by the auctioneer at the time of sale take precedence over printed matter. Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis. Due to safety & insurance reasons, persons under 12 not admitted. Washington Auctioneers License #1960 DRIVER DIRECTIONS From I-84 take Exit 261 turn right onto SR-82/Island Ave. Go left to stay on SR-82/McAllister Rd/Wallowa Lake Hwy, go 10 miles. Keep right to stay on SR-82/Wallowa Lake Hwy, go 30.5 miles, turn right on Lower Diamond Rd. Mill is on the right, watch for signs. Lodging: Enterprise, OR 18 miles SE of Wallowa Best Western 541-426-2000 Ponderosa Motel 541-426-3186 Wilderness Inn 541-426-4535 Joseph, OR 24 miles SE of Wallowa A Cowboy River Front Retreat 541-432-1775 Eagle Cap Chalets 541-432-4704 Wallowa Lake Lodge 541-432-9821 LaGrande, OR 47 miles West of Wallowa Best Western 541-963-3100 Super 8 541-963-8080 Travelodge 541-963-7116 FOOD SERVICE AVAILABLE AT THE AUCTION SITE
James G. Murphy Inc. Commercial & Industrial Auctioneers PO BOX 82160 Kenmore, WA 98028 Plymouth Diesel Locomotive James G. Murphy Inc. PUBLIC AUCTION Wallowa Forest Products 9am - Wednesday - May 26 Preview 8-4, Tuesday, May 25 or by Appointment 75100 Lower Diamond Road, Wallowa, OR 97885 425-486-1246 503-463-4444 Toll Free 1 800-426-3008 www.murphyauction.com