2 0 1 5 MEDICL GS OUTLETS l DIN 13260-2 l BS 5682:1998 l BS 8532:2011 l SS 875 24 30 l FNOR NF S 90-116 / FD S 90-119 l S 2896 l JIS T 7101 l UNI 9507 l ENV 737-6 l EN 15908 l GSS EN ISO 9170-2 l IR MOTOR ENV 737-6
MEDICL GS OUTLETS outlets OR range 3 UNI 9507 outlets 13 Probes 15 NIST connectors 18 naesthetic Scavenging System (GSS) and ir Motor 20 ccessories 24 premium
outlets OR range The terminal units of a medical gas pipeline system are devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances. n incorrect connection puts to hazard the life of patients, therefore the terminal units have been designed following different technical standards so to grant a non-interchangeability among different gases and prevent from any possible mistake. The OR range socket can be fixed to the base block in only one position. The profile of the installed socket is always in the correct position. Base block OR range This component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacuum). The base blocks are designed complying with the standard EN ISO 9170-1 for design and manufacture requirements. ll base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed. Materials: Brass EN 12164 - CuZn39Pb3 NBR/EPDM ISI Vertical inlet base block OR range 36 45 9 ØB øb ZRMOR-O 18,7 8 ZRMOR-V 18,7 8 Vacuum ZRMOR-4 18,7 8 ir ZRMOR-P 18,7 8 Nitrous oxide ZRMOR-8 18,7 8 ir-800 ZRMOR-C 18,7 8 Carbon dioxide ZRMOR-OP 18,7 8 /Nitrous oxide ZRMOR10-O 18,7 10 ZRMOR10-V 18,7 10 Vacuum ZRMOR10-4 18,7 10 ir ZRMOR10-P 18,7 10 Nitrous oxide ZRMOR10-8 18,7 10 ir-800 ZRMOR10-C 18,7 10 Carbon dioxide ZRMOR10-OP 18,7 10 /Nitrous oxide c/w plug for test. 45 side inlet base block OR range 36 45 ØB øb ZRMOR-45-O 18,7 8 ZRMOR-45-V 18,7 8 Vacuum ZRMOR-45-4 18,7 8 ir ZRMOR-45-P 18,7 8 Nitrous oxide ZRMOR-45-8 18,7 8 ir-800 ZRMOR-45-C 18,7 8 Carbon dioxide ZRMOR-45-OP 18,7 8 /Nitrous oxide ZRMOR10-45-O 18,7 10 ZRMOR10-45-V 18,7 10 Vacuum ZRMOR10-45-4 18,7 10 ir ZRMOR10-45-P 18,7 10 Nitrous oxide ZRMOR10-45-8 18,7 10 ir-800 ZRMOR10-45-C 18,7 10 Carbon dioxide ZRMOR10-45-OP 18,7 10 /Nitrous oxide c/w plug for test. PRES BLOCK s.p.a. 3 Medical OutletS
Vertical inlet base block OR range c/w copper pipe 150 ØB 36 45 øb ZRMOR-T-O 18,7 8 ZRMOR-T-V 18,7 8 Vacuum ZRMOR-T-4 18,7 8 ir ZRMOR-T-P 18,7 8 Nitrous oxide ZRMOR-T-8 18,7 8 ir-800 ZRMOR-T-C 18,7 8 Carbon dioxide ZRMOR-T-OP 18,7 8 /Nitrous oxide ZRMOR10-T-O 18,7 10 ZRMOR10-T-V 18,7 10 Vacuum ZRMOR10-T-4 18,7 10 ir ZRMOR10-T-P 18,7 10 Nitrous oxide ZRMOR10-T-8 18,7 10 ir-800 ZRMOR10-T-C 18,7 10 Carbon dioxide ZRMOR10-T-N 18,7 10 Nitrogen ZRMOR10-T-OP 18,7 10 /Nitrous oxide c/w plug for test. 45 side inlet base block OR range c/w copper pipe 36 45 ØB øb ZRMOR-45T-O/1 18,7 8 ZRMOR-45T-V/1 18,7 8 Vacuum ZRMOR-45T-4/1 18,7 8 ir ZRMOR-45T-P/1 18,7 8 Nitrous oxide ZRMOR-45T-8/1 18,7 8 ir-800 ZRMOR-45T-C/1 18,7 8 Carbon dioxide ZRMOR-45T-OP/1 18,7 8 /Nitrous oxide ZRMOR1045T-O/1 18,7 10 ZRMOR1045T-V/1 18,7 10 Vacuum ZRMOR1045T4/1 18,7 10 ir ZRMOR1045T-P/1 18,7 10 Nitrous oxide ZRMOR1045T8/1 18,7 10 ir-800 ZRMOR1045T-C/1 18,7 10 Carbon dioxide ZRMOR1045TOP/1 18,7 10 /Nitrous oxide c/w plug for test. Base block OR range c/w back copper pipe ØB 150 36 45 øb ZRMORD-T-O 23,7 8 ZRMORD-T-V 23,7 8 Vacuum ZRMORD-T-4 23,7 8 ir ZRMORD-T-P 23,7 8 Nitrous oxide ZRMORD-T-8 23,7 8 ir-800 ZRMORD-T-C 23,7 8 Carbon dioxide ZRMORD-T-N 23,7 8 Nitrogen c/w plug for test. Base block OR range for flexible hose ØB øb ZRMORD-O-PG6 18,7 6 ZRMORD-V-PG8 18,7 8 Vacuum ZRMORD-4-PG6 18,7 6 ir ZRMORD-P-PG6 18,7 6 Nitrous oxide ZRMORD-8-PG6 18,7 6 ir-800 ZRMORD-C-PG6 18,7 6 Carbon dioxide ZRMORD-N-PG6 18,7 6 Nitrogen 36 45 50 c/w plug for test. PRES BLOCK s.p.a. 4 Medical OutletS
Base block OR range for flexible hose 69 ØB øb ZRMOR-PG6-O 23,7 6 ZRMOR-PG8-V 23,7 8 Vacuum ZRMOR-PG6-4 23,7 6 ir ZRMOR-PG6-P 23,7 6 Nitrous oxide ZRMOR-PG6-8 23,7 6 ir-800 ZRMOR-PG6-C 23,7 6 Carbon dioxide ZRMOR-PG6-N 23,7 6 Nitrogen c/w plug for test. 36 45 Rotating base block OR range c/w hosetail 34 ØB øb ZRMORG-PG6-O 30 6 ZRMORG-PG8-V 30 8 Vacuum ZRMORG-PG6-4 30 6 ir ZRMORG-PG6-P 30 6 Nitrous oxide ZRMORG-PG6-8 30 6 ir-800 ZRMORG-PG6-C 30 6 Carbon dioxide ZRMORG-PG6-N 30 6 Nitrogen c/w plug for test. Base block OR range c/w NIST connector 65 ZRMORD-O-MNIST 23,7 ZRMORD-V-MNIST 23,7 Vacuum ZRMORD-4-MNIST 23,7 ir ZRMORD-P-MNIST 23,7 Nitrous oxide ZRMORD-8-MNIST 23,7 ir-800 ZRMORD-C-MNIST 23,7 Carbon dioxide ZRMORD-N-MNIST 23,7 Nitrogen c/w plug for test. PRES BLOCK s.p.a. 5 Medical OutletS
Sockets OR range The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gasspecific connecting point. These sockets have been designed in accordance with the following standards: BS 5682:1998, DIN 13260-2, NF S 90-116, FD S 90-119, SS 875 24 30, JIS T 7101, S 2896 and ENV 737-6 for the dimensions of linking point to the probe; EN ISO 9170-1 for design and manufacture requirements. Materials: Brass EN 12164 - CuZn39Pb3 nickel plated NBR/EPDM ISI BS/POM DIN 13260-2 DIN ORPHEUS 43 Ø 53 VGTDEP-OR-O VGTDEP-OR-V VGTDEP-OR-4 VGTDEP-OR-P VGTDEP-OR-C VGTDEP-OR-N Supplied with releaser sleeve that can be custom made on request. Connecting backside and sleeve made of plastic. Vacuum ir Nitrous oxide Carbon dioxide Nitrogen DIN ORPHEUS Plus 43 VGTDE-OR-O VGTDE-OR-V VGTDE-OR-4 VGTDE-OR-P VGTDE-OR-C VGTDE-OR-N Vacuum ir Nitrous oxide Carbon dioxide Nitrogen Ø 53 Supplied with releaser sleeve that can be custom made on request. Connecting backside made of metal and sleeve of plastic. plus DIN ORPHEUS Premium 43 VGTDEM-OR-O VGTDEM-OR-V VGTDEM-OR-4 VGTDEM-OR-P VGTDEM-OR-C VGTDEM-OR-N Vacuum ir Nitrous oxide Carbon dioxide Nitrogen Ø 53 Supplied with releaser sleeve that can be custom made on request. Connecting backside and sleeve made of metal. premium PRES BLOCK s.p.a. 6 Medical OutletS
DIN 13260-2 socket OR range 45 Ø45 VGTDM-OR-O VGTDM-OR-V VGTDM-OR-4 VGTDM-OR-P VGTDM-OR-C VGTDM-OR-N Supplied with releaser sleeve that can be custom made on request. Vacuum ir Nitrous oxide Carbon dioxide Nitrogen DIN 13260-2 horizontal socket OR range 45 VGTDMHO-OR-O VGTDMHO-OR-C VGTDMHO-OR-N Supplied with releaser sleeve that can be custom made on request. Carbon dioxide Nitrogen Ø45 BS 5682:1998 BS 5682:1998 socket OR range 44,5 Ø50 VGTBSM-OR-O VGTBSM-OR-V VGTBSM-OR-4 VGTBSM-OR-P VGTBSM-OR-8 Supplied with releaser sleeve that can be custom made on request. Vacuum ir Nitrous oxide ir-800 BS 5682:1998 horizontal socket OR range 44,5 VGTBSMHO-OR-O VGTBSMHO-OR-V VGTBSMHO-OR-4 VGTBSMHO-OR-P VGTBSMHO-OR-8 Vacuum ir Nitrous oxide ir-800 Ø50 Supplied with releaser sleeve that can be custom made on request. PRES BLOCK s.p.a. 7 Medical OutletS
BS 5682:1998 plastic socket OR range 43 VGTBSP-OR-O VGTBSP-OR-V VGTBSP-OR-4 VGTBSP-OR-P VGTBSP-OR-8 Vacuum ir Nitrous oxide ir-800 Ø50 Supplied with releaser sleeve that can be custom made on request. BS 8532:2011 GSS BS 8532:2011 c/w plastic box Ø 12 VEGS-BS VEGS-BS/1 without box 150 GSS BS 8532:2011 c/w NIST connector VEGS-BS-MNIST NF S 90-116 and FD S 90-119 FNOR socket OR range 42 M27x1 VGTFM-OR-O VGTFM-OR-V VGTFM-OR-4 VGTFM-OR-P VGTFM-OR-8 VGTFM-OR-C Vacuum ir Nitrous oxide ir-800 Carbon dioxide 12 24 PRES BLOCK s.p.a. 8 Medical OutletS
Bulkhead nut 3 B Colour PGTF/1 18,7 36,6 grey M27x1 B identification ring B B Disting.colour ZGTF-O 38 55 white ZGTF-V 38 55 yellow Vacuum ZGTF-4 38 55 black-white ir ZGTF-P 38 55 blue Nitrous oxide ZGTF-8 38 55 white-black ir-800 ZGTF-C 38 55 grey Carbon dioxide ZGTFD70-O 38 70 white ZGTFD70-V 38 70 yellow Vacuum ZGTFD70-4 38 70 black-white ir ZGTFD70-P 38 70 blue Nitrous oxide ZGTFD70-8 38 70 white-black ir-800 ZGTFD70-C 38 70 grey Carbon dioxide SS 875 24 30 SS 875 24 30 socket OR range 43 Ø45 VGTM-OR-O VGTM-OR-V VGTM-OR-4 VGTM-OR-P VGTM-OR-8 VGTM-OR-C Supplied with releaser sleeve that can be custom made on request. Vacuum ir Nitrous oxide ir-800 Carbon dioxide SS 875 24 30 horizontal socket OR range 43 Ø45 VGTMHO-OR-O VGTMHO-OR-V VGTMHO-OR-4 VGTMHO-OR-P VGTMHO-OR-8 VGTMHO-OR-C Supplied with releaser sleeve that can be custom made on request. Vacuum ir Nitrous oxide ir-800 Carbon dioxide PRES BLOCK s.p.a. 9 Medical OutletS
ENV 737-6 ENV 737-6 socket OR range 52 Ø53 VGTEM-OR-O VGTEM-OR-V VGTEM-OR-4 VGTEM-OR-P VGTEM-OR-8 VGTEM-OR-C Supplied with releaser sleeve that can be custom made on request. Vacuum ir Nitrous oxide ir-800 Carbon dioxide JIS T 7101 JIS T 7101 socket OR range 45 VGTJSM-OR-O VGTJSM-OR-V VGTJSM-OR-4 VGTJSM-OR-P Vacuum ir Nitrous oxide Ø50 S 2896 S 2896 outlet 150 Ø B Ø50 øb VGTS-O 1/4 VGTS-V 5/16 Vacuum VGTS-4 1/4 ir VGTS-P 1/4 Nitrous oxide VGTS-8 1/4 ir-800 VGTS-C 1/4 Carbon dioxide VGTS-N 1/4 Nitrogen 48 S 2896 outlet c/w NIST connector 200 M22x1,5 VGTS-O-MNIST VGTS-V-MNIST VGTS-4-MNIST VGTS-P-MNIST VGTS-8-MNIST VGTS-C-MNIST VGTS-N-MNIST Vacuum ir Nitrous oxide ir-800 Carbon dioxide Nitrogen Ø 50 49 PRES BLOCK s.p.a. 10 Medical OutletS
S 2896 naesthetic Scavenge Ø B øb VEGS-S 8 50 S 2896 naesthetic Scavenge c/w NIST connector M22x1,5 VEGS-S-MNIST 200 50 PRES BLOCK s.p.a. 11 Medical OutletS
Plastic boxes for terminal units OR Box without lid 99 B 79 B Profile ZBOX-GT-OR 56,8 46,2 suitable for DIN 13260-2 and SS 875 24 30 standards ZBOX-GT-OR/01 56,8 52,5 suitable for BS 5682:1998 and JIS T 7101 standards ZBOX-GT-OR/02 58,8 55 suitable for ENV 737-6 standard and DIN ORPHEUS Suitable to be either flush-mounted or wall-mounted. 19 Box c/w lid for FNOR outlet 65 46 ZBOXGTF ZBOXGTF/1 c/w locking nut 65 67 Lid for BHU fnor outlet 65 BOXGTF BOXGTF-1 c/w locking nut 15 65 56 PRES BLOCK s.p.a. 12 Medical OutletS
UNI 9507 outlets The terminal units of a medical gas pipeline system are devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances. n incorrect connection puts to hazard the life of patients, therefore the terminal units have been designed following different technical standards that ensure the accordance to the European directive 93/42/EEC so to grant a non-interchangeability among different gases and prevent from any possible mistake. Base blocks This component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacuum). The base blocks are designed in accordance with the standard EN ISO 9170-1 for design and manufacture requirements. ll base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed. Materials: Brass EN 12164 - CuZn39Pb3 NBR/EPDM ISI Base block c/w connector to weld 32 ZRM60-O/PB ZRM60-V/PB ZRM60-4/PB ZRM45-P/PB ZRM60-8/PB ZRM60-C/PB Vacuum ir Nitrous oxide ir-800 Carbon dioxide 8 Hexagonal head plug for base block 17 5 7 Ch 7 Disting.colour GT-O/TPP M22x1,5D white GT-V/TPP M24x1,5D yellow Vacuum GT-4/TPP M20x1,5S black ir GT-P/TPP M16x1,5D blue Nitrous oxide GT-8/TPP M18x1,5D black ir-800 GT-C/TPP M20x1,5D grey Carbon dioxide c/w O-ring Ø36 PRES BLOCK s.p.a. 13 Medical OutletS
Sockets The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gasspecific connecting point. These sockets have been designed in accordance with the following standards: UNI 9507; EN ISO 9170-1 for design and manufacture requirements. Materials: Brass EN 12164 - CuZn39Pb3 nickel plated NBR/EPDM ISI BS/POM UNI 9507 UNI 9507 socket 5,5 9 45 Disting.colour VGTX60-O M22x1,5D white VGT60-V M24x1,5D yellow Vacuum VGT60-4 M20x1,5S black-white ir VGT45-P M16x1,5D blue Nitrous oxide VGT60-7 M18x1,5D white-black ir-800 VGT60-C M20x1,5D grey Carbon dioxide 7 Ø53 The sleeve can be custom made on request. Plastic boxes Box without lid suitable for UNI 9507 outlets BOX-GT 85 20 36,5 Suitable to be either flush-mounted or surface-mounted Supplied with: - service cap; - components designed to link the boxes to form a series. 69 107 85 PRES BLOCK s.p.a. 14 Medical OutletS
Probes ll these male connectors to be coupled to the sockets are non-interchangeable and are designed in accordance with the following standards: UNI 9507, NF S 90-116, FD S 90-119, DIN 13260-2, BS 5682:1998, SS 875 24 30 and ENV 737-6 for the dimensions of linking point to the socket; EN ISO 9170-1 for design and manufacture requirements. Materials: Brass EN 12164 - CuZn39Pb3 nickel plated ISI NBR/EPDM PE/POM/BS UNI 9507 Elbow barb end probe 35 62 55 Disting.colour H IGTG60-PG6-O white 6 IGTG60-PG8-V yellow 8 Vacuum IGTG60-PG6-4 black-white 6 ir IGTG45-PG6-P blue 6 Nitrous oxide IGTG60-PG6-7 white-black 6 ir-800 IGTG60-PG6-C grey 6 Carbon dioxide Supplied with sticky label that can be custom made on request. H NF S 90-116 and FD S 90-119 Straight barb end probe 51 H Disting.colour H IGTF-PG6-O white 6 IGTF-PG8-V yellow 8 Vacuum IGTF-PG6-4 black-white 6 ir IGTF-PG6-P blue 6 Nitrous oxide IGTF-PG6-8 white-black 6 ir-800 IGTF-PG6-C grey 6 Carbon dioxide Supplied with sleeve that can be custom made on request. Elbow barb end probe 48 Disting.colour H IGTGF-PG6-O white 6 IGTGF-PG8-V yellow 8 Vacuum IGTGF-PG6-4 black-white 6 ir IGTGF-PG6-P blue 6 Nitrous oxide IGTGF-PG6-8 white-black 6 ir-800 IGTGF-PG6-C grey 6 Carbon dioxide Supplied with the sleeve that can be custom made on request. H PRES BLOCK s.p.a. 15 Medical OutletS
Straight swivel male threaded probe 46 41,5 Ch 20 B B Disting.colour IGTF-OR-M12-O M12x1 white IGTF-OR-M12-V M12x1 yellow Vacuum IGTF-OR-M12-4 M12x1 white-black ir IGTF-OR-M12-P M12x1 blue Nitrous oxide IGTF-OR-M12-C M12x1 grey Carbon dioxide IGTF-OR-M1/8-O 1/8 white IGTF-OR-M1/8-V 1/8 yellow Vacuum IGTF-OR-M1/8-4 1/8 white-black ir IGTF-OR-M1/4-O 1/4 white IGTF-OR-M1/4-V 1/4 yellow Vacuum Supplied with the sleeve that can be custom made on request. DIN 13260-2 Elbow barb end probe 22 28 55 Disting.colour H IGTGD-PG6-O white 6 IGTGD-PG8-V yellow 8 Vacuum IGTGD-PG6-4 black-white 6 ir IGTGD-PG6-P blue 6 Nitrous oxide IGTGD-PG6-C grey 6 Carbon dioxide IGTGD-PG6-N black 6 Nitrogen Supplied with sticky label that can be custom made on request. 64 H Elbow barb end probe with check valve 22 28 55 Disting.colour H IIGTGD-PG6-O white 6 IIGTGD-PG6-4 black-white 6 ir IIGTGD-PG6-P blue 6 Nitrous oxide IIGTGD-PG6-C grey 6 Carbon dioxide Supplied with sticky label that can be custom made on request. 64 H ENV 737-6 Elbow barb end probe 60 41 55 Disting.colour H IGTGE-PG6-O white 6 IGTGE-PG8-V yellow 8 Vacuum IGTGE-PG6-4 black-white 6 ir IGTGE-PG6-P blue 6 Nitrous oxide IGTGE-PG6-8 white-black 6 ir-800 IGTGE-PG6-C grey 6 Carbon dioxide Supplied with sticky label that can be custom made on request. H PRES BLOCK s.p.a. 16 Medical OutletS
BS 5682:1998 Straight barb end probe 66 H H IGTBS-PG6-O 6,5 IGTBS-PG8-V 8 Vacuum IGTBS-PG6-4 6,5 ir IGTBS-PG6-P 6,5 Nitrous oxide IGTBS-PG6-8 6,5 ir-800 Made of nickel plated brass. SS 875 24 30 Straight barb end probe H IGT-PG6-O 6 IGT-PG10-V 10 Vacuum IGT-PG8-4 8 ir IGT-PG6-P 6 Nitrous oxide IGT-PG8-8 8 ir-800 IGT-PG6-C 6 Carbon dioxide PRES BLOCK s.p.a. 17 Medical OutletS
NIST connectors Range of male and female components intended to maintain gas-specificity by allocation of a set of different diameters and screw thread to mating components to each gas. These connectors are suitable for medical gases when the pressure range is 300 kpa - 1400 kpa and for vacuum when the pressure range is 10 kpa - 100 kpa. These components are designed in accordance with the standard EN 15908 Materials: Brass EN 12164 - CuZn39Pb3 nickel plated NBR/EPDM ISI 1 st fix Nist connector c/w copper pipe welded 120 161,5 Ch 29 M22x1,5 VGTN-PL-O-T1/2 1/2 VGTN-PL-4-T1/2 1/2 ir VGTN-PL-V-T1/2 1/2 Vacuum VGTN-PL-P-T1/2 1/2 Nitrous oxide VGTN-PL-C-T1/2 1/2 Carbon dioxide VGTN-PL-8-T1/2 1/2 ir-800 PL = free flow 1 st fix Nist connector c/w check valve and copper pipe welded 150 Ch 32 200 M22x1,5 VGTN-O-T10 10 VGTN-4-T10 10 ir VGTN-V-T12 12 Vacuum VGTN-P-T10 10 Nitrous oxide VGTN-C-T10 10 Carbon dioxide VGTN-8-T10 10 ir-800 VGTN-GSS-T15* 15 GSS *No check valve 1 st fix Nist connector c/w hosetail & check valve Ch22 20 M22x1,5 VGTN-O-PG6 6 VGTN-4-PG6 6 ir VGTN-V-PG8 8 Vacuum VGTN-P-PG6 6 Nitrous oxide VGTN-C-PG6 6 Carbon dioxide VGTN-8-PG6 6 ir-800 21 70 1 st fix Nist connector c/w hosetail 21 Ch17 59 M22x1,5 VGTN-PL-O-PG6 6 VGTN-PL-4-PG6 6 ir VGTN-PL-V-PG8 8 Vacuum VGTN-PL-P-PG6 6 Nitrous oxide VGTN-PL-8-PG6 6 ir-800 VGTN-PL-C-PG6 6 Carbon dioxide PL= free flow PRES BLOCK s.p.a. 18 Medical OutletS
NIST straight barb end probe M22x1,5 IGTN-PG6-O 6 IGTN-PG8-V 8 Vacuum IGTN-PG6-4 6 ir IGTN-PG6-P 6 Nitrous oxide IGTN-PG6-8 6 ir-800 IGTN-PG6-O 6 ir/ 25 60,5 1 st fix Nist connector c/w M1/4 thread Ch 23 M22x1,5 VGTN-O-M1/4 1/4 VGTN-V-M1/4* 1/4 Vacuum VGTN-4-1/4 1/4 ir * Free flow 11 60 PRES BLOCK s.p.a. 19 Medical OutletS
naesthetic Scavenging System (GSS) and ir Motor They are the part of system to which the operator makes connection and disconnection for exhausting the medical gases coming from anaesthetic and breathing systems. To grant the gas-specifity and prevent any mistake, these terminal units have been designed in accordance to the european standard EN ISO 9170-2 that ensure the conformity to the european directive 93/42/EEC, taken as reference. EN ISO 9170-2 GSS sockets These are the female parts of a terminal unit attached to the base block by a gas-specific interface which contain the gas-specific connection point. Materials: Brass EN 12164 - CuZn39Pb3 luminium series 2000 or 6000 Steel NBR ISI P/POM GSS type 1L outlet for centralized system Ø12 VEGS120/EN1 Supplied with metal sleeve that can be custom made on request. Disting.colour magenta Ø50 31,5 47,5 GSS type 1L active Ø50 Ø Disting.colour ø øb VEG120/EN1 magenta 10 (supply) 16 (evacuation) Supplied with: - adjusting screw for setting following the standard EN ISO 7396-2.- green suction indicator. - sleeve that can be custom made on request. - manifold for connecting the exhaust copper pipe. ØB Ø65 PRES BLOCK s.p.a. 20 Medical OutletS
GSS type 1L active c/w bulkhead plate Ø50 Ø Disting.colour ø øb VEG120/EN2 magenta 10 (supply) 16 (evacuation) Supplied with: - adjusting screw for setting following the standard EN ISO 7396-2. - green suction indicator. - sleeve that can be custom made on request. - manifold for connecting the exhaust copper pipe. ØB Ø65 GSS type 1L active for ceiling pendants Ø50 20 15 Ø Disting.colour ø VEG120/EN3 magenta 10 (supply ) Supplied with: - adjusting screw for setting following the standard EN ISO 7396-2. - green suction indicator. - sleeve that can be custom made on request. - adapter for connecting the exhaust copper pipe or flexible hose. Ø65 Box for GSS active outlet 212 52 20 BOX-GSS Made of aluminium. 125 157 120 252 Ø13 60 PRES BLOCK s.p.a. 21 Medical OutletS
EN ISO 91790-2 GSS probes These are the male non-interchangeable parts to be connected to the outlets. Materials: luminium series 2000 or 6000 anodized 60 Barb end type 1L Ø G 60 30 Disting.colour D øg E IEGG120-PG22/EN magenta 30 22 63 D E ir Motor ENV 737-6 This terminal unit integrates a medical tool drive outlet with a gas scavenging terminal unit. Materials: Brass EN 12164 - CuZn39Pb3 nickel plated Steel NBR nodized luminium ENV 737-6 outlet for ceiling pendants Ø15 VM737-PG6 Ø9 Ø70 82 Ø64 PRES BLOCK s.p.a. 22 Medical OutletS
ENV 737-6 outlet c/w copper pipes Ø70 Ø64 68 60 55,5 VM737-TL Ø8 Ø15 ENV 737-6 barb end probe 163 IM737-PG6 Ø6 20 10 PRES BLOCK s.p.a. 23 Medical OutletS
ccessories dapters for ambulances Materials: Brass EN 12164 - CuZn39Pb3 NBR/EPDM ISI BS/POM luminium dapter with one FNOR NF S 90-116 socket and barb end inlet 24 GTF-1V-PG6-V 6 Vacuum 20 26 60 dapter with two FNOR NF S 90-116 sockets and barb end inlet 62 24 GTF-2V-PG6-O 6 GTF-2V-PG6-V 6 Vacuum 20 26 110 dapter with three FNOR NF S 90-116 sockets and barb end inlet 40 19 GTF-3V-PG6-O 6 20 26 117 dapter with four FNOR NF S 90-116 sockets and barb end inlet 40 18 GTF-4V-PG6-O 6 26 156 20 PRES BLOCK s.p.a. 24 Medical OutletS
dapter with one SS 875 24 30 socket and barb end inlet 21 GT-1V-O 6 54 42 dapter with two SS 875 24 30 sockets and barb end inlet 68 21 GT-2V-O 6 54 110 dapter with two DIN 13260-2 sockets and barb end inlet 68 20,5 GTD-2V-O 6 GTD-2V-4 6 ir 64,5 110 dapter with four DIN 13260-2 sockets and barb end inlet 68 20,5 GTD-4V-O 6 GTD-4V-4 6 ir 64,5 190 PRES BLOCK s.p.a. 25 Medical OutletS
Quick couplers for flowmeter and regulator DIN mini socket male threaded Ø 41,5 Ch27 ø VGTD-O-M1/4 1/4 VGTD-4-M1/4 1/4 ir VGTD-V-M1/4 1/4 Vacuum VGTD-P-M1/4 1/4 Nitrous oxide VGTD-C-M1/4 1/4 Carbon dioxide VGTD-O-M3/8 3/8 10 26 DIN mini socket with barb end 50,5 VGTD-O-PG6 6 VGTD-4-PG6 6 ir Ch 27 SS mini socket male threaded 41 VGT-O-M10X1 M10x1 VGT-4-M10X1 M10x1 ir VGT-P-M10X1 M10x1 Nitrous oxide VGT-C-M10X1 M10x1 Carbon dioxide VGT-O-M1/4 1/4 VGT-4-M1/4 1/4 ir Ch 24 FNOR mini socket male threaded Ø B 39 25 B ø VGTF-O-M1/4 6,5 1/4 VGTF-4-M1/4 6,5 1/4 ir VGTF-O-M3/8 10 3/8 VGTF-4-M3/8 10 3/8 ir VGTF-V-M3/8 10 3/8 Vacuum Ch23 BS mini socket male threaded L L VGTBS-O-M1/4/V 1/4 60 PRES BLOCK s.p.a. 26 Medical OutletS
JIS mini socket male threaded L L VGTJS-O-M1/4 1/4 54,5 S mini socket male threaded L L VGTS-O-M1/4 1/4 47 UNI mini socket male threaded L L VGTI60-O-M1/4 1/4 56 VGTI60-O-M3/8 3/8 41 Flexible hoses for medical gas Flexible hose for EN ISO 5359 assemblies Disting.colour NTPB6x12-O white NTPB8x14-V yellow Vacuum NTPB6x12-4 white-black ir NTPB6x12-P blue Nitrous oxide NTPB6x12-C grey Carbon dioxide NTPB6x12-NC black - 50 meters coil. Without DEHP. PRES BLOCK s.p.a. 27 Medical OutletS
plus PBCTGTGB PRES BLOCK S.p.. - Via lpignano, 151-155 I - 10040 CSELETTE (TO) Tel. +39 011 9688055 (r.a.) - Fax +39 011 9688668 http://www.presblock.com e-mail: export@presblock.com sales@presblock.com The products described herein, including without limitation, product features, specifications, designs are subject to change by Pres Block at any time without notice.