Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: RDO Equipment Company Jesse Miller 12500 Dupont Avenue South Burnsville, Minnesota 55337 612.202.6906 800.950.3298 952.890.7046 jmiller@rdoequipment.com www.rdoequipment.com Version of Excel used: 2010 Furnish separate price quote for: 1.0 Articulating Wheel Loader Make & Model Horse Power/Engine Information Operating Weight Full Turn Static Tipping Load Recommended Bucket Type & Size (Stuck/Heaped) (SAE) Is bucket included with base unit? Break Out Force, bucket (SAE) Hinge Pin Height Articulation Angle Brake Type Transmission Type, Describe features John Deere 724K Net Peak Power at 1,800 rpm 197 kw (264 hp) / John Deere PowerTech PVX 6090 / EPA Interim Tier 4/EU Stage IIIB 19 562 kg (43,127 lb.) 12 982 kg (28,620 lb.) General-Purpose with Bolt-on Edge / Heaped 3.1 m3 (4.0 cu. yd.) / Struck 2.4 m3 (3.2 cu. yd.) No 14 524 kg (32,019 lb.) 4.12 m (13 ft. 6 in.) 80-deg. arc (40-deg. each direction) Service Brakes Hydraulically actuated, inboard sun-shaft mounted, oil cooled, self-adjusting, single disc Parking Brake Automatic spring applied, hydraulically released, driveline mounted, oil cooled, multi disc Countershaft-type PowerShift / Torque Converter Single stage, single phase Shift Control Electronically modulated, adaptive, load and speed dependent Operator Interface Steering-column or joystick-mounted F-N-R and gearselect lever; quick-shift button on hydraulic lever Shift Modes Manual/auto (1st D or 2nd D); quick-shift button with 2 selectable modes: kick-down or kickup/down; and 3 adjustable clutch-cutoff settings Hydraulic locking front with Differential type, Front & Rear conventional rear Seat type Seat with backrest extension, deep foam, fabric cover, and adjustable air suspension Battery CCA (2 12 volt) 1,400 CCA (each) Tires 23.5R25 L3 1 Star Michelin Tires w/3 pc. Rims Hydraulics Maximum Rated Flow at 6895 kpa (1,000 psi) and 2,250 rpm 310 L/m (82 gpm
Bucket Controls Alternator Size 2-function valve, joystick control or fingertip controls, hydraulic-function enable/disable, optional 3rd- and 4th-function valve with auxiliary lever 24 volt with 100-amp Starting Aid Road & Work Lights Ether start aid & engine block heater Halogen driving lights with guards (2) / Front (4) and rear (2) cab work lights 1 Year parts and labor Warranty Details: Months, Years, Hours, etc. 1.01 BASE MACHINE PRICE $ 200,330 1.02 1010 724K Loader In Base 1.03 1025 724K Standard Waste Handler w/standard Z-Bar Linkage and Hi-Lift Boom NOTE: * Requires AT398402 (8.11) 724K IT4 Waste Handler Package Installed. * Does not include bottom guards; see GR Mfg in the Referral Attachments Section. * Requires codes: 0810 (In Base) 724K Standard Gathering Group 0914 (In Base) IT4 Engine 1110 (3.02) 4-Speed transmission without Lockup Torque Converter 1520 (3.14) Automatic Reversing Hydraulic Fan 1430 (3.12) Air Intake System with Centrifugal Precleaner 2010 (1.05) Standard Z-Bar Boom with Grease Pin Joints 3120 (3.08) Manual Axle Differential Lock 5570 (8.06) No Fenders # must have this code added to code sheet 7120 (4.06) Heavy Duty LED Turn Signal & Marker Lights * Cannot order code 9125 (4.07) Beacon Bracket $ (5,128) 1.04 1045 724K IT4 Waste Handler with Standard Z-Bar Linkage & Boom NOTE: * Requires AT398402 (8.11) 724K IT4 Waste Handler Package Installed. * Does not include bottom guards; see GR Mfg in the Referral Attachments Section. * Requires codes:0810 (In Base) 724K Standard Gathering Group 0914 (In Base) IT4 Engine 1110 (3.02) 4-Speed transmission without Lockup Torque Converter 1520 (3.14) Automatic Reversing Hydraulic Fan 1430 (3.12) Air Intake System with Centrifugal Precleaner 2010 (1.05) Standard Z-Bar Boom with Grease Pin Joints 3120 (3.08) Manual Axle Differential Lock 5570 (8.06) No Fenders # must have this code added to code sheet 7120 (4.06) Heavy Duty LED Turn Signal & Marker Lights * Cannot order code 9125 (4.07) Beacon Bracket $ (5,128) 1.05 2010 Z-Bar with Standard Greased Pin Joints In Base 1.06 2015 Z-Bar with NeverGrease Pin Joints $ 3,145 1.07 2020 High Lift Loader Boom and Z-Bar Linkage (Adds 14.88 In Height to Bucket Hinge Pin. Rated Tipping Load, Breakout and Lift Capacity will be lower than Standard boom. $ 3,296 1.08 2025 High Lift Loader Boom and Z-Bar Linkage and NeverGrease Pin Joints (Adds 14.88 In Height to Bucket Hinge Pin. Rated Tipping Load, Breakout and Lift Capacity will be lower than Standard boom. $ 6,439 OPERATOR STATION 2.0 Use this section to offer operator station options, number the items starting with 2.1, 2.2, 2.3, etc., until you have listed all operator station options. Use as many numbers as you need. 2.01 2110 Joystick Steering (Provides 2 Steering systems with steering wheel and joystick. Includes code 2.03) $ 2,670 2.02 2120 Steering Wheel Only Requires code 2220 (2.04) or 2230 (2.05) Seat. In Base 2.03 2210 Premium Heated, Leather/Fabric, High-Wide Back with Head Rest extension, Air Suspension Seat with Left Hand Joystick Steering. Seat included in code 2110 (2.01 Joystick Steering $ 551
2.04 2220 Standard Fabric, Back Rest Extension, Air Suspension Seat for Conventional Steering In Base 2.05 2230 Premium Heated, Leather/Fabric, High-Wide Back with Head Rest extension, Air Suspension Seat with Conventional Left Arm Rest. $ 440 2.06 9105 AM/FM/WB Radio Includes speakers and antenna $ 314 2.07 9110 AM/FM/WB Radio w/cd Player Includes speakers and antenna $ 359 2.08 9115 Powered Cab Air Pre-cleaner $ 503 2.09 Automatic Ride Control with Adjustable Speed Settings In Base 2.10 8310 Standard Outside Mirrors In Base 2.11 8320 Heated Outside Mirrors $ 340 2.12 9305 Secondary Steering $ 1,473 2.13 9130 Rear Camera and Radar Object Detection System (Rear view is displayed in the standard LCD monitor. $ 2,420 ENGINE/POWER TRAIN 3.0 Use this section to offer engine and powertrain options, number these items starting with 3.1, 3.2, 3.3, etc. 3.01 1120 5-Speed Transmission with Lock-up Torque Converter In Base 3.02 1110 4-Speed Transmission $ (1,696) 3.03 1610 Standard Fuel Tank and Lines In Base 3.05 3046 Front Hydraulically Locking Differential & Rear Conventional Differential Axles In Base 3.06 3049 Front & Rear Hydraulically Locking Differential Axles $ 1,254 3.07 3110 Automatic Axle Differential Lock Requires Bottom guard code 9410 (3.18). $ 738 3.08 3120 Manual Axle Differential Lock In Base 3.09 1330 Chrome Exhaust $ 189 3.10 9010 Automatic Ether Starting Aid Included 3.11 9015 Engine Block Heater Included 3.12 1430 Centrifugal Engine Air Pre-cleaner $ 326 3.13 9045 Quick Fluid Service w/environmental Drains and Sampling Ports (Coupling system for engine oil, transmission fluid, hydraulic fluid, and engine coolant) $ 241 3.14 1520 Automatic Reversing Fan Drive. Requires code 1430 (3.12) $ 741 3.15 9061 Axle Coolers w/filtration Used w/secondary Steering Requires code 9305 (2.12) Secondary Steering. $ 1,139 3.16 9063 Axle Coolers w/filtration Used w/o Secondary Steering. Not for use with code 9305 (2.12) Secondary Steering. $ 1,139 3.17 1915 NeverGrease Rear Axle Oscillation and Steering Cylinder Joints In Configuration 3.18 9410 Transmission and Bottom Guards with Level 2 Sound Package Included. * Can not be used with Code 9305 (2.12), Secondary Steering $ 1,274 3.19 8450 Cab with Air A/C Charge In Base
4.0 ELECTRICAL/LIGHTS Use this section to offer electrical/light options, number these items starting with 4.1, 4.2, 4.3, etc. 4.01 Two Heavy Duty Batteries (Each w/ 1400 CCA & 440 Minute Reserve) In Base 4.02 Lockable Master Electrical Disconnect Switch In Base 4.03 1700 JDLink Ultimate Machine Monitoring System with 3 Year Message Service (USA and Canada only) In Base 4.04 4 Front and 2 Rear Work Lights, 2 Halogen Driving Lights with Guards, 1 Engine Compartment Light, Turn Signals and Flashers, and LED Stop and Tail Lights In Base 4.05 7110 Turn Signal and Marker Lights In Base 4.06 7120 Heavy Duty LED Turn Signal and Marker Lights $ 136 4.07 9125 Beacon Bracket $ 97 4.08 9135 Embedded Payload Scale (Includes calibration) $ 4,231 4.09 9210 Electrical Corrosion Prevention Level 1 Package (Preventive Corrosion treatment for all electrical & electronic connections) $ 1,127 4.1 1215 130 Amp Alternator In Base 4.11 1210 100 amp Alternator with A/C $ 634 4.12 AT301703 Amber Strobe Light (Cab roof mounted, gel filled & double flash) $ 766 TIRES/RIMS 5.0 Use this section to offer tire/rim options, number these items starting with 5.1, 5.2, 5.3, etc. 5.01 4000 Less Wheels & Tires w/ 9 Degree Axle Stops (Required for rear axle warranty if using solid tires) $ (13,430) 5.02 4010 23.5x25 3 pc. Rims Less Tires $ (11,981) 5.03 4012 750/65R25 5 pc. Rims Less Tires $ (11,342) 5.04 4523 23.5-25 20PR L3 Titan Bias Tires w/3 pc. Rims $ (2,701) 5.05 4621 23.5R25 L3 1 Star XHA Michelin Radial Tires w/3pc. Rims In Base 5.06 4622 23.5R25 L3 1 Star VMT Bridgestone Radial Tires w/3 pc. Rims $ (1,350) 5.07 4624 23.5R25 L3 1 Star Goodyear Radial Tires with 3 pc. Rims $ (168) 5.08 5241 750/65R25 L3 Low Profile 1 Star XLD Michelin Radial Tires w/5 pc. Rims $ 4,961 5.09 5113 725/70-25 L4 16PR Titan LS150 Logger Tread on 5pc Rims $ 40 5.10 5310 Tire Pressure Monitoring System. Not for use with codes 4000 (5.01), 4010, 4011 (5.02), 4012 (5.03) $ 901 5.11 5320 Less Tire Pressure Monitoring System In Base 6.0 HYDRAULICS Use this section to offer hydraulic options, number these items starting with 6.1, 6.2, 6.3, etc. 6.01 Automatic Return to Dig, In cab Adjustable Automatic Boom Height Kick out, and Return to Carry. In Base 6.02 2422 Two Function Joystick w/ FNR Control Requires code 2120 (2.02)Conventional Steering. $ 304 6.03 2424 Two Function Joystick w/ Steering Column FNR $ 304 6.04 2426 Two Function 2-Lever Fingertip Control & Steering Column FNR In Base 6.05 2432 Three Function Joystick w/ FNR & Auxiliary Control Lever for Third Function Requires code 2120 (2.02) Conventional Steering. (Includes auxiliary lines to boom cross tube) $ 1,532 6.06 2434 Three Function Joystick w/ Steering Column FNR & Auxiliary Control Lever for Third Function (Includes auxiliary hydraulic lines to boom cross tube) $ 1,496 6.07 2436 Three Function 3-Lever Fingertip Control w/steering Column FNR & Auxiliary Control Lever for Third Function (Includes auxiliary hydraulic lines to boom cross tube) $ 1,755 6.08 2444 4 Function-4 Lever Finger Tip Controls and Steering Column FNR. (Includes auxiliary hydraulic lines to boom cross tube) $ 2,299 6.09 AT337443 Detent Kit for 3rd Function $ 590 6.10 9310 Hydraulic Control System for Quick Coupler Locking Pins (For use with field installed quick coupler. Includes hydraulic lines from control valve to loader boom cross tube, electric switch and solenoid valve) $ 750
7.0 BUCKET/ATTACHMENTS Use this section to offer these options, number these items starting with 7.1, 7.2, 7.3, etc. 7.01 8550 Less Bucket w/ Bucket Pins Included 7.02 8774 4.75 Cu Yd GP Bucket w/ Heavy Duty Bolt-On Cutting Edge $ 5,937 7.03 8776 4.75 Cu Yd GP Bucket w/ Teeth and Cutting Edge Segments $ 6,544 7.04 8779 4.75 Cu Yd GP Bucket w/ Jagz Cutting Edges $ 6,959 7.05 8561 Hi-Vis Z-Bar and High Lift Coupler $ 4,336 7.06 8586 Hi-Vis 60" Fork Frame w/60" Tines $ 4,683 8588 Hi-Vis 90in Coupler Fork frame w/72 in. tines $ 4,967 7.07 8859 4.0 Cu Yd General Purpose Coupler BucketW/Teeth and Cutting edge segments $ 5,970 7.08 8857 Hi-Vis 4 Cu Yd Bucket w/bolt on Cutting Edge $ 5,269 7.09 8760 4.25 Cu. Yd. (3.3 Cu. M.) General Purpose Bucket with Bolt-on Cutting Edge $ 5,489 7.10 8765 4.25 Cu. Yd. (3.3 Cu. M.) General Purpose Bucket with Teeth and Cutting Edge Segments $ 6,206 OTHER LOADER OPTIONS 8.0 Use this section to offer front attachment options, number these items starting with 8.1, 8.2, 8.3, etc. 8.01 Manuals & Filters Included 8.04 5540 Full coverage Front Fenders In Base 8.05 5550 Full Tire Front & Rear Fenders for Muddy Applications $ 1,411 8.06 5570 No Front Fenders Waste Handler. Requires code 1025 (1.03) or 1045 (1.04) In Base 8.07 9140 Fire Extinguisher $ 72 8.08 9510 Lift Eyes $ 228 8.09 9520 License Plate Bracket & Light $ 91 8.10 9525 Slow Moving Vehicle Emblem $ 83 8.11 AT398402 724K IT4 waste Handler Pachage $ 22,191 *Attachment Prices Valid with Purchase of Base Machine. Attachments Ordered Individually Subject to Freight and Installation Charges. ACS Couplers and Attachments 8.12 Pro2000 Series 60 Automatic Male Master - Installed $ 7,309 8.13 Pro1000 Series 60 Automatic Male Master - Installed $ 7,820 8.14 Pro2000 Blank Female Adapter Pro-Series 60 for Attachments, Brooms, and Plows (Customer Responsible for Installation) $ 1,943 8.15 Pro100 Blank Female Adapter Pro-Series 60 for Attachments, Brooms, and Plows (Customer Responsible for Installation) $ 1,986 8.16 4.5 Cu Yd X 120" Quick Coupler GP Bucket w/ BOE $ 9,876 8.17 Quick Coupler Standard Construction Duty Forks (Size 60), 18,000 Lbs Capacity, 3"x7"x66" Tines $ 10,395 8.18 Combo Coupler Fee - No Warranty $ 1,190 8.19 3.5 Yd Multi Purpose 4-in-1 Bucket $ 18,154 JRB Loader Couplers and Attachments 8.20 600HV Hydraulically Actuated Coupler - JRB Installed $ 5,627 8.21 600HVG Hydraulically Actuated Coupler NeverGrease - JRB Installed $ 4,139 8.22 QC475GPE 4.75 Cu Yd General Purpose Coupler Bucket w/boe $ 10,124 8.23 QC600CUF10672M Construction Utility Forks - Manual Tine Adjustment (106" carriage, 72" forks) $ 9,819 8.24 QC325MPE 3.25 yd Multi Purpose Bucket w/boe( requires 3rd Function) $ 15,735 8.25 QC500GBE 5 Yd Grapple Bucket w/ BOE Spec Full/Half Cut or full cut away(requires 3rd Function) $ 17,553 8.26 QC600PDc9560 Paddle Top Clamp Forks(95" Carriage, 60" Forks)Requires 3rd Function $ 17,698 8.27 QC600EB13'7 3- section Extendable Boom w/hook 13'7" EXT $ 4,189 EXTENDED WARRANTY OPTIONS 9.0 Use this section to offer performance/warranty options, number these items starting with 9.1, 9.2, 9.3, etc.
(Specify years, miles or hours extended term covers.) 9.01 Price: 9.02 Price per loaded mile Price: $ 9.03 Price per loaded mile Price:
9.04 Price per loaded mile Price: DELIVERY STARTING POINT 10.0 City State Zipcode 10.01 Delivery starting point - City, State, Zip Burnsville, MN 55337 10.02 Delivery starting point - City, State, Zip Grand Forks, ND 58203 10.03 Delivery starting point - City, State, Zip Marshall, MN 56258 10.04 Delivery starting point - City, State, Zip Moorhead, MN 56560 10.05 Delivery starting point - City, State, Zip North Mankato, MN 56003 10.06 Delivery starting point - City, State, Zip Rochester, MN 55901 10.07 Delivery starting point - City, State, Zip Sauk Rapids, MN 56379 10.08 Price per loaded mile Price: $ 4.75 10.09 Minimum delivery charge: $ 350 11.0 NEW If rental EQUIPMENT programs RENTAL are available PROGRAM on the new equipment offered, with the option to purchase, list the Hourly Rental Rate: NA Weekly Rental Rate: $ 2,670.00 Monthly Rental Rate: $ 8,000.00 Percent (%) of Rental Fee applied to purchase price: 90% If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: NA
VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM 12.0 See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 45.45 13.0 HOURLY SHOP RATE $ 108 PER HOUR (Installation services may be requested on an "as needed" basis)