Introduction A Key Control Program That s Right For You Not every user has the same key control needs. That s why Medeco has designed different key control programs and different keyways to meet a wide range of security specifications and key access requirements. Commercial Program The Commercial Program is designed for consumers who need Medeco locks primarily for protection against picking, drilling and other forms of physical attack. Keys may be obtained from any Medeco locksmith without specific authorization. Card Programs These programs are for users who need key duplication protection in addition to protection against physical attack. Authorized key holders are issued a card with embossed control data and a space for their signature. To obtain duplicate keys, authorized card holders present the card to a participating Medeco locksmith. The data and signature is verified and a duplicated key can then be issued. A Card Program is ideal for consumers, businesses and institutions that plan to issue authorization cards to more than one person or need keys and service available nationwide. Dealer/Service Center This program offers instant local service for additional keys in addition to duplication protection and attack resistance. Consumers, businesses, manufacturers and institutions simply return to the locksmith or security provider from whom they purchased the locks. Keys are duplicated immediately after ownership and authorization have been verified. Call, Toll Free 1.800.282.2837 End User Program The End User program is for large businesses and institutions that have their own locksmith on staff and that want to produce Medeco keys within their own facility. This program offers individualized control over key duplication procedures. A strict written contract with Medeco is required to prevent unauthorized key duplication or proliferation. Factory Program This program is for customers, businesses, manufacturers, and institutions that want the highest level of control in addition to Medeco s exceptional attack resistance. Additional keys are only available from the Medeco factory and only with the proper signature. Fundamentals of the Carded Program: Medeco s voucher and electronic controlled Card Programs Policies and Procedures (Levels II and V) are designed to ensure that users get the maximum key duplication protection and convenience, in addition to protection against physical attacks. Only users with an authorized card may obtain duplicate keys for their Medeco locks. These programs are also made to provide the assurance to the authorized card holder that he or she is the only authorized agent able to request additional authorization cards for other users or to transfer the authorization to another in cases of the user leaving the business or institution. Key control programs that utilize a credit card type card to assist in proper authorization of duplicate keys include SKY, GLD, NUK, Patriot, Liberty, Gotham, DND and KeyMark Silver. HIGH SECURITY Section Table of Contents C Cam Locks Medeco Cams...17 Cylinders Cylinders - Medeco... 8 16 H Hole Cover Springs...21 K Keyblanks Medeco...22 Keying Kits Medeco...20 Key Machines...22 Keymark and X4...13 M Medeco Parts... 19, 21 P Padlocks Padlocks-Medeco...20 Parts... 21 Pin Kits Medeco...20 Pins Pins-Medeco...19 S Slider Packages...21 Switch Locks...18 T Tailpieces-Medeco...21 Tailpieces-Schlage...21 HIGH SECURITY Section B - 5
Fax Your Order 800.447.2299 Medeco Key Control Program Reference Chart Medeco Section B - 6
Call, Toll Free 1.800.282.2837 Section B - 7
Fax Your Order 800.447.2299 10 Series Rim & Mortise Cylinders Retrofit Cylinders: Mortise Cylinders Medeco mortise cylinders have threads on the outside of the shell and are designed to be screwed into other manufacturer s mortise lock cases. A cam on the back of the cylinder operates the lock mechanism and a set screw holds the mortise cylinder in place. Medeco rim cylinders are used with auxiliary rim locks such as: surface mounted deadbolts, night latches, panic devices and jimmyproof locks (also know as vertical dropbolts or interlocking deadbolts). Rim cylinders are held in place with a back plate and two mounting screws. 10 series, rim and mortise cylinders, are UL437 listed for drill and pick resistance, and the those that incorporate the Biaxial design, offer utility patented key control. Features & Benefits: Large variety of cylinder lengths and cam/tailpiece configurations provide excellent retrofit capability and reduce the need to replace the entire locking device. Utility patented key control, (for cylinders that incorporate the Medeco3 design), provides protection against the unauthorized duplication of keys. A special elevating and rotating pin tumbler design, along with false slots on the bottom pins, mushroom top pins and a sidebar mechanism, work together, to provide superior pick resistance. Angled cuts on the keys, along with fore and aft positioning, and the reciprocal slider of the Medeco3 design, provide added dimensions that dramatically increases key combinations and enables Medeco to produce some of the largest master key systems in the industry. Hardened steel inserts, positioned in critical areas of the cylinder, provide a high degree of drill resistance. Solid brass construction provides high quality and long cylinder life. 8 different finishes provide an extremely close color match with existing hardware. UL-437 listing provides assurance that cylinders meet universal standards for drill and pick resistance and resistance against other types of forced attack. Set screw pin chamber caps allow quick and easy pinning and re-keying without the need to take the cylinder apart. 2 year warranty offers assurance of product quality and factory support in the rare event there is a problem. Biaxial (W) MORTISE CYLINDERS 570-1015 10W0100-26-G3P-Z02 1 KD $157.25 570-1030 10W0200-26-G3S-Z02 1-1/8 SUB $145.85 570-1035 10W0200-26-G3P-Z02 1-1/8 KD $157.25 570-1055 10W0500-26-G3P-Z01 1-1/4 KD $162.44 569-1015 10W0200-26-PAS-Z02 1-1/8 SUB $145.85 57X-1005 10W0200-26-X3S-Z02 1-1/8 SUB $145.85 57Z-1005 10W0200-26-Z3S-Z02 1-1/8 SUB $145.85 57Z-6031 10W0200-24-Z3S-Z02 1-1/8 SUB $130.80 Medeco 3 (T) MORTISE CYLINDERS 576-1000 10T0100-05-DUN-Z02 1 SUB, NO $113.40 576-6002 10T0100-24-DUN-Z02 1 SUB, NO $113.40 576-6012 10T0100-26-DUN-Z02 1 SUB, NO $113.40 576-6022 10T0200-05-DUN-Z02 1-1/8 SUB, NO $113.40 576-6032 10T0200-24-DUN-Z02 1-1/8 SUB, NO $117.14 576-6042 10T0200-26-DUN-Z02 1-1/8 SUB, NO $127.20 576-1045 10T0500-05-DUN-Z01 1-1/4 SUB, NO $117.60 576-1055 10T0500-26-DUN-Z01 1-1/4 SUB, NO $117.60 576-6045 10T5200-26-DLN-Z02 1-1/2 SUB, NO $197.76 576-1040 10T5200-26-DUN-Z02 1-1/2 SUB, NO $182.54 577-1003 10T0100-05-FMS-Z02 1 SUB $126.60 577-1000 10T0100-05-FMP-Z02 1 KD $138.00 577-6001 10T0100-24-FMS-Z02 1 SUB, FM Slider $126.60 577-6000 10T0100-24-FMP-Z02 1 KD $138.00 577-6011 10T0100-26-FMS-Z02 1 SUB, FM Slider $141.60 577-6010 10T0100-26-FMP-Z02 1 KD $142.20 577-6021 10T0200-05 FMS-Z02 1-1/8 SUB, FM Slider $126.60 577-1020 10T0200-05-FMP-Z02 1-1/8 KD $138.00 577-6031 10T0200-24-FMS-Z02 1-1/8 SUB, FM Slider $130.80 577-6041 10T0200-26-FMS-Z02 1-1/8 SUB, FM Slider $141.60 577-6040 10T0200-26-FMP-Z02 1-1/8 KD $153.00 Section B - 8
Call, Toll Free 1.800.282.2837 Retrofit Cylinders: Mortise Cylinders 577-1045 10T0500-05-FMP-Z01 1-1/4 KD $142.20 577-1055 10T0500-26-FMP-Z01 1-1/4 KD $142.20 Medeco Cylinders 577-1060 10T5200-26-FMP-Z02 1-1/2 KD $201.00 576-1001 10T0100-05-DLN-Z02 1 SUB, NO $113.40 576-1002 10T0100-05-DLT-Z02 1 KD $138.00 576-6001 10T0100-24-DLN-Z02 1 SUB, NO $142.20 576-6000 10T0100-24-DLT-Z02 1 KD $142.20 576-6011 10T0100-26-DLN-Z02 1 SUB, NO $138.60 576-6010 10T0100-26-DLT-Z02 1 KD $153.00 576-6021 10T0200-05-DLN-Z02 1-1/8 SUB, NO $113.40 576-1020 10T0200-05-DLT-Z02 1-1/8 KD $153.00 576-6031 10T0200-24-DLN-Z02 1-1/8 SUB, NO $127.20 576-6030 10T0200-24-DLT-Z02 1-1/8 KD $142.20 576-6041 10T0200-26-DLN-Z02 1-1/8 SUB, NO $127.20 576-6040 10T0200-26-DLT-Z02 1-1/8 KD $153.00 576-1046 10T0500-05-DLT-Z01 1-1/4 KD $142.20 576-1056 10T0500-26-DLT-Z01 1-1/4 KD $147.00 576-1060 10T5200-26-DLT-Z02 1-1/2 KD $223.56 MORTISE CYLINDERS RIM CYLINDERS Z01 Standard Cam Z02 Adams Rite Cam SUB: Sub Assembled NO Denotes NO SLIDER KD Denotes Keyed Different Retrofit Cylinders: Rim Cylinders. 1-1/2, 6-pin 570-1060 10W0400H-26-G3S-Y02 SUB $160.68 570-1065 10W0400H-26-G3P-Y02 KD $172.08 569-1045 10W0400H-26-PAS-Y02 SUB $160.68 57X-1085 10W0400H-26-X3S-Y02 SUB $160.68 57Z-1085 10W0400H-26-Z3S-Y02 SUB $160.68 576-1090 10T0400H-05-DUN-Y02 SUB, NO $126.00 576-6052 10T0400H-24-DUN-Y02 SUB, NO $126.00 576-6062 10T0400H-26-DUN-Y02 SUB, NO $141.60 577-1095 10T0400H-05-FMP-Y02 KD $150.60 577-6051 10T0400H-24-FMS-Y02 SUB, FM $139.20 577-1090 10T0400H-24-FMP-Y02 KD $251.00 577-6061 10T0400H-26-FMS-Y02 SUB, FM $156.00 577-6060 10T0400H-26-FMP-Y02 KD $167.40 576-1095 10T0400H-05-DLT-Y02 KD $155.40 576-6050 10T0400H-24-DLT-Y02 KD $167.40 576-6060 10T0400H-26-DLT-Y02 KD $167.40 576-6061 10T0400H-26-DLQ-Y02 SUB $156.00 SUB: Sub Assembled NO Denotes NO SLIDER KD Denotes Keyed Different Section B - 9
Fax Your Order 800.447.2299 Key-In-Knob Cylinders 20 Series Medeco Key-In-Knob cylinders are designed to retrofit knob type cylindrical locksets, lever type cylindrical locksets, padlocks and bored type auxiliary deadlatches and deadlocks. 20 series, Key-in-knob cylinders are UL437 listed for drill and pick resistance, and the those that incorporate the Medeco3 design, offer utility patented key control. Features & Benefits: Over 100 different cylinder designs and tailpiece configurations enable Medeco to offer the largest retrofit capability in the industry. More retrofit cylinders means fewer replacements of the complete lockset. Lock cylinder packages, that contain one cylinder and a variety a tailpieces, provides greater retrofit capability, while at the same time, reduce the amount of inventory required. Utility patented key control, (for cylinders that incorporate the Biaxial design), provides protection against the unauthorized duplication of keys. A special elevating and rotating pin tumbler design, along with false slots on the bottom pins, mushroom top pins and a sidebar mechanism, work together, to provide superior pick resistance. Angled cuts on the keys, along with fore and aft positioning, and the reciprocal slider of the Medeco3 design, provide added dimensions that dramatically increases key combinations and enables Medeco to produce some of the largest master key systems in the industry. Hardened steel inserts, positioned in critical areas of the cylinder, provide a high degree of drill resistance. Solid brass construction provides high quality and long cylinder life. 8 different finishes provide an extremely close color match with existing hardware. UL437 listing provides assurance that cylinders meet universal standards for drill and pick resistance and resistance against other types of forced attack. 2 year warranty offers assurance of product quality and factory support in the rare event there is a problem. Retrofit Cylinders: Lever Cylinders 20 Series 570-1070 20W200S1-06-G3S SUB $137.51 570-1075 20W200S1-06-G3P KD $130.80 570-1080 20W200S1-26-G3S SUB $137.51 570-1085 20W200S1-26-G3P KD $148.91 569-1050 20W200S1-06-PAS SUB $128.40 569-1055 20W200S1-26-PAS SUB $137.50 57X-6130 20W200S1-06-X3S SUB $119.40 57X-1080 20W200S1-26-X3S SUB $135.59 57Z-6130 20W200S1-06-Z3S SUB $137.51 57J-1080 20W200S1-26-J3S SUB $135.59 57Z-1080 20W200S1-26-Z3S SUB $135.59 57Z-1010 20W0503-26-Z3S KD $121.80 576-6130 20T200S1-06-DLQ SUB DL Slider $133.56 576-6131 20T200S1-06-DLT KD $135.00 576-6141 20T200S1-26-DLQ SUB, DL Slider $133.56 576-6140 20T200S1-26-DLT KD $144.96 576-6132 20T200S1-06-DUN SUB, NO $106.20 576-6142 20T200S1-26-DUN SUB, NO $119.16 577-6131 20T200S1-06 FMS SUB, FM Slider $133.56 577-6130 20T200S1-06 FMP KD $135.00 577-6141 20T200S1-26 FMS SUB, FM Slider $133.56 577-6140 20T200S1-26 FMP KD $144.96 Section B - 10 MEDECO CYLINDERS
Call, Toll Free 1.800.282.2837 Retrofit Cylinders: Deadbolt Cylinders All locks are not created equal. Medeco cylinders provide a high degree of security by incorporating special design features inside each cylinder. Medeco cylinders offer superior pick resistance, excellent resistance against drilling and other forced attacks, large number of combinations and a utility patent to protect against unauthorized key duplication. Pick Resistance Pick resistance is accomplished through the use of specially designed pins that must be elevated and rotated to an exact position in order for the lock to operate. False slots on the sides of the pins, along with mushroom shaped top pins, and with the incorporation of the reciprocal slider mechanism, further enhance the cylinder s pick resistance. Drilling Resistance To resist drilling, hardened steel inserts are used to protect critical areas of the plug face, shell and sidebar. Additional drill resistance is provided by hardened steel rods inside the bottom pins and selective use of hardened steel top pins. Unauthorized Duplication Protection against the unauthorized duplication of keys is accomplished through the use of strong utility patents and strict factory key control policies. Additional restriction on key cutting occurs due to fact that a special key cutting must be used at accurately reproduce the critical angled cuts on a Medeco key. 570-1100 20W009S4-26-G3S SUB $140.63 570-1105 20W009S4-26-G3P KD $152.03 569-1105 20W009S4-26-PAS SUB $140.63 57X-1260 20W009S4-06-X3S SUB $122.40 57X-1100 20W009S4-26-X3S SUB $140.63 57J-1100 20W009S4-26-J3S SUB $140.63 57Z-1100 20W009S4-26-Z3S SUB $140.63 576-6071 20T009S4-06-DLQ SUB, DL Slider $130.56 576-6070 20T009S4-06-DLT KD $138.00 576-6081 20T009S4-26-DLQ SUB, DL Slider $138.68 576-6080 20T009S4-26-DLT KD $148.08 576-6072 20T009S4-06-DUN SUB, NO $136.68 576-6082 20T009S4-26-DUN SUB, NO $133.68 577-6071 20T009S4-06-FMS SUB, FM Slider $126.60 577-6070 20T009S4-06-FMP KD $138.00 577-6081 20T009S4-26-FMS SUB, FM Slider $136.68 577-6080 20T009S4-26-FMP KD $148.08 MEDECO CYLINDERS Section B - 11
Fax Your Order 800.447.2299 Interchangeable Core Medeco interchangeable core locks are designed so that cores can quickly and easily be changed by non-technical personnel by using a special control key. Locks can, in effect, be rekeyed without having a working knowledge of the lock or without having to take the lock apart. Medeco interchangeable core cylinders are available in a variety of different sizes, formats and security levels. Cores are available to fit into rim and mortise cylinders, key-in-knob locks, padlocks and bored auxiliary deadlatches and deadbolts. For replacement Best style small format interchangeable core cylinders, see Medeco s KeyMark product line. Features & Benefits: Cylinders can quickly and easily be changed by using a special control key which will remove the core from the lock housing. A core with a new combination can then be inserted and the lock will then effectively be re-keyed. All of this can be done without having to take the lock apart which reduces the expense of calling outside service personnel to perform routine lock re-keys. The 32 series interchangeable core cylinders have the control/locking lug positioned at the middle of the core. This provides additional protection against dent puller attacks. The 32 series uses coordinated cuts between the operating 6-Pin 570-1210 31W0100A-26-B3S I/C Core Only, SUB $146.59 570-1180 32W0201-26-G3S I/C Core Only, SUB $146.59 570-1185 32W0201-26-G3P I/C Core Only, KD $157.99 576-6162 32T0201-06-DUN I/C Core Only, SUB, No Slider $114.00 576-6182 32T0201-26-DUN I/C Core Only, SUB, No Slider $116.53 576-6161 32T0201-06-DLN I/C Core Only, SUB, No Slider $116.53 576-6181 32T0201-26-DLN I/C Core Only, SUB, No Slider $127.92 576-6163 32T0201-06-DLT I/C Core Only, KD $138.60 576-6183 32T0201-26-DLT I/C Core Only, KD $153.72 keys and the control keys which eliminates the need for build up or control pins and simplifies pinning. Utility patented key control, (for cylinders that incorporate the Medeco3 design), provides protection against the unauthorized duplication of keys. A special elevating and rotating pin tumbler design, along with false slots on the bottom pins, mushroom top pins and a sidebar mechanism, work together, to provide superior pick resistance. Angled cuts on the keys, along with fore and aft positioning, and the reciprocal slider of the Medeco3 design, provide added dimensions that dramatically increases key combinations and enables Medeco to produce some of the largest master key systems in the industry. Hardened steel inserts, positioned in critical areas of the cylinder, provide a high degree of drill resistance. Solid brass construction provides high quality and long cylinder life. UL437 listing (32 series only) provides assurance that cylinders meet universal standards for drill and pick resistance and resistance against other types of forced attack. 2 year warranty offers assurance of product quality and factory support in the rare event there is a problem. 570-1195 32-0275-26-Z02 I/C Mortise Cyl Housing $98.64 570-1205 32-0475H-26-Y02 I/C Rim Housing $106.68 570-1220 33-076021-26-Z02 I/C 1-3/8 Mortise Cyl Housing $40.20 Abbreviations: SUB: Sub Assembled I/C: Interchangeable KD: Keyed Different Section B - 12
Call, Toll Free 1.800.282.2837 Retrofit Cylinders: Keymark and X4 568-1000 10N0200-24-DBQS-Z02 1-1/8 SUB $92.28 571-3025 10N0200-26-DBQS-Z02 1-1/8 SUB $92.28 568-1005 10N0200-24-DBKS-Z02 1-1/8 SUB $92.28 568-1010 10N0200-26-DBKS-Z02 1-1/8 SUB $92.28 568-1015 10N0200-24-DBVS-Z02 1-1/8 SUB $92.28 568-1020 10N0200-26-DBVS-Z02 1-1/8 SUB $92.28 Rim Cylinders 571-3035 10N0400H-26-DBQS-Y02 1-1/2 SUB $101.04 568-1040 10N0400H-26-DBKS-Y02 1-1/2 SUB $101.04 568-1045 10N0400H-26-DBVS-Y02 1-1/2 SUB $97.20 Lever/Knob Cylinders with Schlage Tailpiece Packs 568-2000 20N200S1-06-DBQS SUB $76.80 571-3020 20N200S1-26-DBQS SUB $79.90 568-2005 20N200S1-06-DBKS SUB $76.80 568-2015 20N200S1-26-DBKS SUB $79.90 568-2010 20N200S1-06-DBVS SUB $76.80 568-2020 20N200S1-26-DBVS SUB $79.90 57C-1080 20K200S1-26-7CS SUB $83.04 Keymark X4 Universal Lever/Knob Cylinder 571-3030 20N200000-26-DBQS $75.00 KeyMark Overview The KeyMark product line features cylinders with the unique, utility patented Security Leg keyway and patent protected key blanks to fight unauthorized key duplication. Medeco developed the KeyMark line for installations that called for strict key control but do not demand high level pick and drill resistance. KeyMark products include features to resist pick and impression attacks, but KeyMark cylinders are not UL Listed. Medeco s extensive line of KeyMark products includes conventional rim, mortise, knob, and interchangeable core cylinders that quickly and easily retrofit many manufacturers locks. In addition to retrofit cylinders, the KeyMark line includes strong padlocks and deadbolt locks. Interchangeable Core, Small Format Order # Item # Price 568-4000 33N600006-06-DBQS SUB $67.20 568-4005 33N600006-26-DBQS SUB $67.20 568-4010 33N600006-06-DBKS SUB $67.20 568-4015 33N600006-26-DBKS SUB $67.20 568-4020 33N600006-06-DBVS SUB $67.20 568-4025 33N600006-26-DBVS SUB $67.20 568-4040 33N700006-26-DBVS SUB $32.40 571-3005 32N2201-26-DBQS SUB $83.40 568-4030 32N2201-26-DBKS SUB $83.40 568-4035 32N2201-26-DBVS SUB $83.40 KeyMark IC Core Price: $69.22 Order # Item # Description 57C-1270 33K600006-26-7CS I/C Core Only, SUB Deadbolt Cylinders With Schlage Tailpiece Packs 568-3000 20N009S4-06-DBQS SUB $76.80 571-3010 20N009S4-26-DBQS SUB $73.80 568-3005 20N009S4-06-DBKS SUB $83.02 568-3010 20N009S4-26-DBKS SUB $83.02 568-3015 20N009S4-06-DBVS SUB $76.80 568-3020 20N009S4-26-DBVS SUB $83.02 Medeco Cylinders Section B - 13
Fax Your Order 800.447.2299 Commercial Maxum Deadbolts Exceeds ANSI Grade 1 standard for auxiliary locks. Solid brass, free turning collar and 1/4 inch diameter mounting bolts resist wrenching, prying and hammering attacks. 1 inch throw hardened steel bolt resists sawing and crowbar attacks. Hardened steel inserts and rotating pins provide drill and pick resistance according to UL 437 standard. The Medeco3 design offers a utility patent that provides protection against unauthorized key duplication. MAXUM DEADBOLTS Features & Benefits: Bolt mechanism designed to accommodate both mortise and drive-in applications, which provide greater flexibility and ease of installation. Solid brass collar spins under pressure to prevent wrench attacks. Large thumbturn provides ease of use by physically challenged individuals. Steel shroud over bolt protects against ice pick type attacks. High security strike plate has a special box design with 2 screws that anchor the strike directly to the building structure behind the frame, preventing kick-in type attacks. Hardened steel bolt and bolt throwing mechanism are surrounded by a heavy-gauge tubular steel housing for maximum resistance to crowbar attacks. Solid brass design is secured with high-tensile steel mounting bolts for maximum resistance against hammer and prying attacks. Utility patented key control, (for cylinders that incorporate the Medeco3 design), provides protection against the unauthorized duplication of keys. A special elevating and rotating pin tumbler design, along with false slots on the bottom pins, mushroom top pins and a sidebar mechanism, work together, to provide superior pick resistance. Angled cuts on the keys, along with fore and aft positioning, and the reciprocal slider of the Medeco3 design, provide added dimensions that dramatically increases key combinations and enables Medeco to produce some of the largest master key systems in the industry. Hardened steel inserts, positioned in critical areas of the cylinder, provide a high degree of drill resistance. 8 different finishes provide an extremely close color match with existing hardware. UL437 listing provides assurance that cylinders meet universal standards for drill and pick resistance and resistance against other types of forced attack. 2 year warranty offers assurance of product quality and factory support in the rare event there is a problem. Finishes 05 - (605) Bright Brass, clear coated 09 - (609) Satin Brass, blackened, satin relieved, clear coated 24 - (624) Dark oxidized statuary bronze, clear coated 26 - (626) Satin Chromium plated over nickel Functions 0 = S/C: Single Cylinder. Cylinder x Thumbturn 2 = D/C: Double Cylinder. Cylinder x Cylinder Section B - 14
Call, Toll Free 1.800.282.2837 Commercial Maxum Deadbolts LESS BOLTS Medeco Deadbolts Single Cylinder 570-2005 11WC60L-05-G3P KD $185.40 570-2015 11WC60L-09-G3P KD $185.40 570-2025 11WC60L-26-G3P KD $195.00 569-2000 11WC60L-05-PAS SUB $174.00 569-2005 11WC60L-09-PAS SUB $174.00 569-2010 11WC60L-26-PAS SUB $179.52 576-7001 11TC60L-05-DLQ SUB, DL Slider $176.04 576-7000 11TC60L-05-DLT KD $187.44 576-7011 11TC60L-09-DLQ SUB, DL Slider $156.60 576-7010 11TC60L-09-DLT KD $187.44 576-7023 11TC60L-24-DLQ SUB, DL Slider $156.60 576-7024 11TC60L-24-DLT KD $175.80 576-7021 11TC60L-26-DLQ SUB, DL Slider $176.04 576-7020 11TC60L-26-DLT KD $187.44 577-7001 11TC60L-05-FMS SUB, FM Slider $156.60 577-7000 11TC60L-05-FMP KD $168.00 577-7011 11TC60L-09-FMS SUB, FM Slider $176.04 577-7010 11TC60L-09 FMP KD $187.44 577-7023 11TC60L-24-FMS SUB, FM Slider $156.60 577-7024 11TC60L-24-FMP KD $168.00 577-7021 11TC60L-26-FMS SUB, FM Slider $176.04 577-7020 11TC60L-26-FMP KD $280.00 576-7002 11TC60L-05-DUN SUB, No Slider $161.64 576-7012 11TC60L-09-DUN SUB, No Slider $161.64 576-7025 11TC60L-24-DUN SUB, No Slider $161.64 576-7022 11TC60L 26 DUN SUB, No Slider $161.64 Double Cylinder 570-2035 11WC62L-05-G3P KD $258.60 570-2045 11WC62L-09-G3P KD $295.88 570-2055 11WC62L-26-G3P KD $295.88 569-2015 11WC62L-05-PAS SUB $235.80 569-2020 11WC62L-09-PAS SUB $235.80 569-2025 11WC62L-26-PAS SUB $269.02 576-7031 11TC62L-05-DLQ SUB, DL Slider $235.80 576-7030 11TC62L-05-DLT KD $285.72 576-7041 11TC62L-09-DLQ SUB, DL Slider $235.80 576-7040 11TC62L-09-DLT KD $431.00 576-7053 11TC62L-24-DLQ SUB, DL Slider $262.92 576-7054 11TC62L-24-DLT KD $285.72 576-7051 11TC62L-26-DLQ SUB, DL Slider $239.16 576-7050 11TC62L-26-DLT KD $285.72 577-7031 11TC62L-05-FMS SUB, FM Slider $235.80 577-7030 11TC62L-05-FMP KD $258.60 577-7041 11TC62L-09-FMS SUB, FM Slider $235.80 577-7040 11TC62L-09-FMP KD $285.72 577-7053 11TC62L-24-FMS SUB, FM Slider $235.80 577-7054 11TC62L-24-FMP KD $258.60 577-7051 11TC62L-26-FMS SUB, FM Slider $235.80 577-7050 11TC62L-26-FMP KD $258.60 576-7032 11TC62L-05-DUN SUB, No Slider $248.52 576-7042 11TC62L-09-DUN SUB, No Slider $222.60 576-7055 11TC62L-24-DUN SUB, No Slider $222.60 576-7052 11TC62L-26-DUN SUB, No Slider $248.52 Maxum Bolts not included with Deadbolt Locks. Order # Item # Backset Description 570-0330 11-0A1911-06 2-3/8 1 x 2-1/4 Face Plate 570-0335 11-0A1911-26 2-3/8 1 x 2-1/4 Face Plate 570-0391 11-0A1921-06 2-3/4 1 x 2-1/4 Face Plate 570-0390 11-0A1921-26 2-3/4 1 x 2-1/4 Face Plate 570-0332 11-0A1913-26 2-3/8 Drive-In-Bolt 570-0334 11-0A1923-26 2-3/4 Drive-In-Bolt $80.16 ea Section B - 15
Fax Your Order 800.447.2299 Residential Deadbolts Beautiful solid brass hardware for discriminating tastes. Features & Benefits: Double-locking action makes Medeco locks virtually pickproof UL 437 high security deadbolt One inch hardened steel bolt to resist sawing Hardened steel inserts provide the utmost resistance to drilling Solid brass collar spins under pressure so a wrench is ineffective Solid brass construction secured with high-tensile steel bolts. Finishes: Anti-tarnish Polished Brass (05), Oil-rubbed bronze (10), Antique Brass (09), Satin Nickel (19) Single Cylinder, KD 2-3/8 backset. Order # Item # Price 575-6050 11TR503-05-DLQ SUB, DL Slider $252.12 575-6000 11TR503-05-DLT KD $263.52 575-6055 11TR503-09-DLQ SUB, DL Slider $249.00 575-6060 11TR503-09-DLT KD $263.52 575-6065 11TR503-10-DLQ SUB, DL Slider $252.12 575-6010 11TR503-10-DLT KD $263.52 575-6070 11TR503-19-DLQ SUB, DL Slider $252.12 575-6005 11TR503-19-DLT KD $263.52 574-6050 11TR503-05-FMS SUB $247.20 574-6000 11TR503-05-FMP KD $263.52 574-6055 11TR503-09-FMS SUB $252.12 574-6060 11TR503-09-FMP KD $258.60 574-6065 11TR503-10-FMS SUB $247.20 574-6010 11TR503-10-FMP KD $258.60 574-6070 11TR503-19-FMS SUB $252.12 574-6005 11TR503-19-FMP KD $263.52 576-6085 11TR503-05-DUN SUB, No Slider $237.72 576-6055 11TR503-09-DUN SUB, No Slider $237.72 576-6065 11TR503-10-DUN SUB, No Slider $237.72 576-6067 11TR503-19-DUN SUB, No Slider $237.72 576-6095 11TR503-26-DUN SUB, No Slider $237.60 Double Cylinder 2-3/8 backset. Order # Item # Price 575-6100 11TR523-05-DLQ SUB, DL Slider $309.00 575-6015 11TR523-05-DLT KD $355.20 575-6105 11TR523-09-DLQ SUB, DL Slider $339.00 575-6110 11TR523-09-DLT KD $361.80 575-6115 11TR523-10-DLQ SUB, DL Slider $339.00 575-6025 11TR523-10-DLT KD $361.80 575-6120 11TR523-19-DLQ SUB, DL Slider $339.00 575-6020 11TR523-19-DLT KD $361.80 574-6100 11TR523-05-FMS SUB $332.40 574-6015 11TR523-05-FMP KD $331.80 574-6120 11TR523-09-FMS SUB $332.40 574-6125 11TR523-09-FMP KD $342.60 574-6115 11TR523-10-FMS SUB $332.40 574-6025 11TR523-10-FMP KD $331.80 574-6130 11TR523-19-FMS SUB $339.00 574-6020 11TR523-19-FMP KD $331.80 576-6135 11TR523-05-DUN SUB, No Slider $319.80 576-6105 11TR523-09-DUN SUB, No Slider $310.20 576-6115 11TR523-10-DUN SUB, No Slider $295.80 576-6145 11TR523-19-DUN SUB, No Slider $319.80 576-6125 11TR523-26-DUN SUB, No Slider $306.13 Section B - 16
Call, Toll Free 1.800.282.2837 Cam Lock Kits Medeco cam locks set the standard for security in 3/4 diameter locks. Medeco high security cam locks are recognized throughout the world as the standard for protection. No other utility lock can be compared with Medeco s proven track record of security and long term reliability. Medeco cam locks utilize hardened, stainless steel inserts throughout the cylinder to provide the ultimate defense against drilling, pulling, and other forms of vandal attack. Offering hundreds of cam and cylinder length configurations, Medeco can fit nearly any application requiring a 3/4 diameter lock. These locks area available keyed alike, keyed different, or master keyed, and offer patented key control programs to prevent the unauthorized duplication of keys and maintain system integrity. These versatile high security locks are frequently found on safes, gun cabinets, medicine storage areas, vending and other coin operated equipment, slot machines and on other OEM applications. Medeco cam locks can be found in casinos around the world. In many cases, they are the only locks that meet the stringent requirements for gaming equipment. 5 PIN MEDECO Cam Locks Order # Item # Length Price 570-3000 60W0350T-KIT-26-G8P 7/8 $104.34 570-3005 60W0650T-KIT-26-G8P 1-1/8 $104.34 570-3010 60W1150T-KIT-26-G8P 5/8 $104.34 570-3015 60W1450T-KIT-26-G8P 1-1/2 $100.74 576-3000 60T0350T-KIT-26-DLT 7/8 $101.76 576-3005 60T0650T-KIT-26-DLT 1-1/8 $101.76 576-3010 60T1150T-KIT-26-DLT 5/8 $101.76 576-3015 60T1450T-KIT-26-DLT 1-1/2 $101.76 Applications: Medeco high security cam locks can be used in any standard 3/4 diameter application and a multitude of markets including: Safe Banking Communication Utility Alarm Data Encryption Furniture Access Control Locker Cabinet Pay Telephone Transit Laundry Vending Certification: UL 437 Listed Technical Information: Three, four, and five pin models available depending on size. Available in standard sizes from 7/16 to 2. Two flat models available, key retaining only. Clockwise or counterclockwise rotation, 90 or 180. Keyed alike, keyed different, or master keyed. Finishes: 626 brushed chrome finish standard. Other finishes available, depending on volume. Section B - 17
Fax Your Order 800.447.2299 Switch Locks Medeco 3 4 diameter switch locks offer a wide range of electrical functions with the physical security and patented key control of a Medeco cylinder. Available in either single or double switch models, Medeco switch locks are ideally suited for applications requiring controlled access to electrically activated systems, including alarms, ATMs, time delay safes, encryption devices, heavy power equipment, control panels, and electrically access doors and gates. Switch locks use a five pin cylinder to maximize keyed different and master keying capabilities. Medeco design and engineering resources are available to assist customers with special functional requirements. The Medeco unique design provides triple locking action, making the locks virtually pick proof. All Medeco keys and locks are protected under patent, trademark, and copyright laws. Medeco3 keys may only be duplicated by Medeco or by a Medeco authorized sales outlet, and only at your request. Benefits: * Available in single or double switch models, momentary and maintained positions. * Silver or gold contacts (for low amperage applications) designed to accept quick connect leads. * Hardened stainless steel inserts inside the cylinder provide the ultimate defense against drilling and other forms of physical attack. * Unique elevating and rotating tumbler pin system is virtually pick proof. * Patented Medeco keys may only be duplicated by Medeco or an authorized Medeco service outlet, and only at your request. * Medeco switch locks are completely serviceable, and can be re-keyed in case of lost or stolen keys. * Medeco switch locks can be keyed in with other 60 series products (10 series products may be keyed into existing 60 series systems) * Locks can be keyed alike, keyed different, or master keyed depending on your specific needs. Applications: Can be used to retrofit many 3 4 diameter application including: * Heavy Power Machinery * Time Delay Safes * Material Handling Equipment * Construction Vehicles * Electrically Accessed Gates * Cash Control Systems * Encryption Devices * Alarms * Control Panels * ATMs Warranted for two years against manufacturer s defects. See Medeco limited Warranty for full details. Certification: * Lock - UL 437 Listed * Switch UL Registered, CSA Certified. Technical Information * Five pin, 3 4 double D mounting standard. * Available in either single or double switch models with silver or gold contacts. * Rated at 7 amps resistive at 125/250 VAC. * Contacts designed to accept quick connect leads (AMP connector number 60598-3). Finishes: * 26 brushed chrome finish standard. 5-Pin Switch Locks Order # Item # Contacts Key Pulls 570-3030 65W2150T-021-26-G8P MOM 1 570-3025 65W2150T-012-26-G8P MAIN 2 Order # Item # Contacts Key Pulls 576-3030 65T2150T-021-26-DLT MOM 1 576-3025 65T2150T-012-26-DLT MAIN 2 $162.05 $158.64 Section B - 18
Call, Toll Free 1.800.282.2837 PINS BIAXIAL TUMBLER PINS 100/pack Order # Item # 570-0005 TP-F50-1B 570-0010 TP-F50-2B 570-0015 TP-F50-3B 570-0020 TP-F50-4B 570-0025 TP-F50-5B 570-0030 TP-F50-6B 570-0095 TP-F50-1D 570-0100 TP-F50-2D 570-0105 TP-F50-3D 570-0110 TP-F50-4D 570-0115 TP-F50-5D 570-0120 TP-F50-6D 570-0035 TP-F50-1K 570-0040 TP-F50-2K 570-0045 TP-F50-3K 570-0050 TP-F50-4K 570-0055 TP-F50-5K 570-0060 TP-F50-6K 570-0065 TP-F50-1M 570-0070 TP-F50-2M 570-0075 TP-F50-3M 570-0080 TP-F50-4M 570-0085 TP-F50-5M 570-0090 TP-F50-6M Price $120.00 / pk of 100 570-0125 TP-F50-1Q 570-0130 TP-F50-2Q 570-0135 TP-F50-3Q 570-0140 TP-F50-4Q 570-0145 TP-F50-5Q 570-0150 TP-F50-6Q 570-0155 TP-F50-1S 570-0160 TP-F50-2S 570-0165 TP-F50-3S 570-0170 TP-F50-4S 570-0175 TP-F50-5S 570-0180 TP-F50-6S BIAXIAL MASTER PINS 100/pack Price 570-0185 TP-F50-1W (Master Pin) $43.20/pk 570-0190 TP-F50-2W (Master Pin) $43.20/pk 570-0195 TP-F50-3W (Master Pin) $43.20/pk 570-0200 TP-F50-4W (Master Pin) $43.20/pk 570-0205 TP-F50-5W (Master Pin) $43.20/pk 570-0210 TP-F10-1T #1 Top Pins $45.60 570-0215 TP-F10-2T #2 Top Pins $45.60 570-0220 TP-F10-3M #3 Top Pins Mushroom $45.60 570-0230 TP-F10-4M #4 Top Pins Mushroom $45.60 570-0235 TP-F10-5T #5 Top Pins $45.60 570-0238 TP-F10-6T #6 Top Pins $45.60 KEYMARK BOTTOM PINS 100/pack Price: $12.00 / pk of 100 571-0005 TP-K40-00-BH 571-0010 TP-K40-01-BH 571-0015 TP-K40-02-BH 571-0020 TP-K40-03-BH 571-0025 TP-K40-04-BH 571-0030 TP-K40-05-BH 571-0035 TP-K40-06-BH 571-0040 TP-K40-07-BH 571-0045 TP-K40-08-BH 571-0050 TP-K40-09-BH KEYMARK TOP SPRINGS Pack of 300: $19.32 571-0145 CP-030590 KEYMARK TOP PINS Price: $10.80 per 100/pack 571-0055 TP-K40-02-TH 571-0060 TP-K40-03-TH 571-0065 TP-K40-04-TH 571-0070 TP-K40-05-TH 571-0075 TP-K40-06-TH 571-0080 TP-K40-07-TH 571-0085 TP-K40-08-TH 571-0090 TP-K40-09-TH 571-0095 TP-K40-10-TH 571-0100 TP-K40-11-TH 571-0105 TP-K40-12-TH 571-0110 TP-K40-13-TH 571-0115 TP-K40-14-TH 571-0120 TP-K40-15-TH 571-0125 TP-K40-16-TH 571-0130 TP-K40-17-TH 571-0135 TP-K40-18-TH 571-0140 TP-K40-19-TH Medeco Parts 571-0150 CP-011011-020 Set Screws 100/PKG KeyMark $12.00 571-0155 CP-170430 I/C Pin Spring Caps (Stamped) 100/pk $6.00 571-0160 CP-170440 I/C Pin Spring Caps (Machined) 100/pk $6.00 X-4 Bottom Pins 100/pk $17.52 per pack Order # Item # 571-5000 TP-K43-00-B 571-5005 TP-K43-01-B 571-5010 TP-K43-02-B 571-5015 TP-K43-03-B 571-5020 TP-K43-04-B 571-5025 TP-K43-05-B 571-5030 TP-K43-06-B 571-5035 TP-K43-07-B 571-5040 TP-K43-08-B 571-5045 TP-K43-09-B KeyMark x4 Locking Pin & Locking Pin Springs Order # Item # Price 570-0465 CP-064231 $4.44 Locking Pin 570-0470 CP-031170 $3.48 Locking Pin Springs Section B - 19
Fax Your Order 800.447.2299 Pin Kits K-5005. Biaxial 10-50 Series broached and milled pin combination (Door Hardware), Large metal box, 30 each bottom, master, and top pins K-5006. Biaxial 10 through 50 Series (Door Hardware), Large metal box, 100 each Bottom, Master, & Top Pins. K-9003. Biaxial 60 Series (Cam & Switch Locks), Small Metal Box, 10 each of Bottom Pins (top pins not used). KJ1501. Medeco 3 BiLevel Pin Kit (100 each BiLevel Top and Bottom Pins) K-4001. KeyMark Pin Kit; Large Wood Kit, 100 each Bottom, Master, and Top Pins, Spring, Caps, Spring Covers, Set Screws, Pinning Fixture, Capping Punch, Pin Ejector & Key Gauge Included. K-4002. KeyMark Mini Pin Kit; 30 Bottom Pins, 60 each of Master & Top Pins, Springs, Caps, Spring COvers, Set Screws, Pinning Fixture. K-4006. Keymark X4 Pin Kit for Conventional Cylinders (.511 plug), Bottom Pins for.511 Plug Only, Not SFIC. Springs, Caps, Spring Covers, Set Screws, Pinning Fixture, Capping Punch, Pin Ejector, and Key Gauge also included. 570-0002 K-5005 Small Biaxial Kit $854.40 570-0001 K-5006 Large Biaxial $1,864.80 570-0004 K-9003 Biaxial 60 Series $375.60 570-0700 KJ1501 3 BiLevel Pin Kit $747.60 571-0002 K-4001 Deluxe KeyMark $966.00 571-0003 K-4002 Small KeyMark $235.20 570-0710 K-4006 Keymark X4 Pin Kit $723.80 Padlocks We will build padlocks with Medeco keyways to order! Section B - 20
Call, Toll Free 1.800.282.2837 Medeco Parts Biaxial Spring Covers Order # Item # Price 570-0400 CP-170051 $56.40/pk of 100 Medeco Hole Cover Springs Spring cover for 20 series KIK cylinders 6-Pin also for Keymark, Schlage LFIC. 570-0405 CP-170730-5 5-pin $63.60 570-0410 CP-170730-6 6-pin $63.60 570-0425 CP-170011 6-pin Spring Cover $56.40 for 31 & 32 Series IC 570-0430 CP-170021 5-pin Spring Cover $56.40 for 32 series, Cam & Switch Locks Springs & Sidebar Assemblies 570-0240 CP-030001 Tumbler Springs, 10-55 Series $10.80 570-0435 CP-030017 Tumbler Spring $10.80 570-0440 CP-030018 Sidebar Spring, Stainless Steel $10.80 570-0445 CP-030910 3 Slider Spring $12.00 570-0450 CP-084571 5-pin Sidebar Assy for Door Hdwe Cyls $8.04 570-0455 CP-084671 6-pin Sidebar Assy for Door Hdwe Cyls $8.04 Lever & Knob Cylinder TAILPIECE PACKAGES $13.08 ea Price Order # Item # Description 570-0285 94-0034 for ARROW (A1) Includes: CT-Y70, CT-Y73, CP-160321 (spacer) 570-0290 94-0035 for FALCON (F1) Includes: CT-Y49, CT-Y54, CT-Y58, CT-Y68, CT-Y71 CT-Y72, CP-160311 570-0295 94-0036 for SCHLAGE (S1) Includes: CT-Y49, CT-Y52, CT-Y53, CT-Y74 Schlage Deadbolt Cylinder TAILPIECE PACKAGES For cylinders listed as S4 in cylinder part number, includes CT-F34, CT-F35, CT-F36, CT-F37, & CT-F38. Order # Item # Price 570-0243 94-0098 $13.08 ea Cams $4.44 ea. Order # Item # Description 570-0250 CT-Z01 YALE CAMS 570-0255 CT-Z02 ADAMS RITE CAM 570-0260 CT-Z34 SCHLAGE CAMS 570-0245 CT-Z00 CORBIN CAMS 570-0270 CT-Z20 SARGENT CAMS 570-0265 CT-Z47 YALE CAMS Misc. Order # Item # Price 570-0242 CP-011013-020 #8-32 x 1/8 Allen Set Screws Pin Chambers 10 Series Rim/Mortise 100/pk $28.80 570-0460 94-0207 Kit Kat Tool for KIK Capping $4.74 Slider Packages $14.40 ea Price Order # Item # 570-0380 94-0174-11-U 570-0385 94-0174-22-V 570-0360 94-0174-33-W 570-0365 94-0174-44-X 570-0375 94-0174-05 DL 570-0358 94-076-66-FM Section B - 21
Fax Your Order 800.447.2299 Key Machines These key machines are designed for constant use by the busiest locksmith shops. The machines utilize a powerful 1/4 horse power motor, click stop depth wheel, spacing and angle levers and a dedicated vise and clamp. 570-0340 95-010001 Universal MEDECO Key Machine $13,834.80 571-0001 95-000701 KEYMARK Key Machine $13,060.20 Universal Medeco Key Machine. Designed to hold Biaxial and Original keys. Cutter is fed into key blank by pulling down on a handle. KeyMark Key Machine Designed to hold KeyMark keys. Cutter is fed into key blank by pulling down on a handle. Medeco Cards - Vouchers KeyMark KeyCards/ Vouchers Order # Item # Price 571-0004 LT-801-005-100 FAXABLE VOUCHERS N/C 571-4010 KY-KSCARD-8E-661 6 PIN Key Card W/KEYS $25.44 571-4015 KY-KSCARD-8E-761 7 PIN Key Card W/KEYS $25.44 Medeco Cut Keys Cut Keys Order # Item Price 576-4000 DL 5 PIN TBDL $18.00 576-4005 DL 6 PIN TADL $18.00 576-4010 DL 5 PIN tfdl $18.00 570-4000 KY-125600-G399 GLD G2-5pin $19.20 570-4005 KY-126600-G399 GLD G1 6-pin $19.20 570-4010 KY-125400-G399 GLD G6 $19.20 KeyMark Cut Keys $16.56 ea. 571-4000 KY-326600-8E 6 PIN 571-4005 KY-327600-8E 7 PIN Two 5-Pin Biaxial Cut Keys w/ Authorization Card $32.48 ea. Order # Item # 570-0500 G3-XX-Card-XX-56 5-pin 570-0600 G3-XX-Card-XX-66 6-pin Section B - 22