MANUAL MODEL NUMBER SB0C Snow Thrower 9-09 Rev. 0.8.0 BY Printed in U.S.A.
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) 8 9 9 0 9 0 8 9 8 8 9 8 9 0 0 8 9 9 9 8 0 0
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) KEY PART NO. NO. DESCRIPTION 9 0-9 Pulley, Impeller 8 89-09 Bearing Assembly, Flange - Nut, Hex Flange /-8 8 0- Bolt, Flat Head, Carriage /-8 x /8 8 8 0-0 Bolt, Carriage /- 8 x /8 9 88-0 Nut, Cage /8-0 8-09 Housing, Auger 8 0-9 Bar, Scraper 8 0-9 Bracket, Corner Discharge - Base, Discharge Chute 89-0 Washer, Flat 80 0 0-00 Washer, Lock / 8 9 0- Screw, Hex Head /-8 x / 8 9-8 Screw, Hex Head / x 9 8 80 0-00 Nut, Hex Lock /-0 0 8 80 0-00 Nut, Hex Lock /-8 - Washer, Flat / 8 0-9 Skid Plate, RH 9- Washer, Nylon, Friction 8 0-0 Bolt, Carriage /-8 x / 8-00 Bolt, Shoulder /-0-8 Bearing, Auger -9 Washer, Thrust, " 8 9 0-90 Bolt, Shear 9 8 0-9 Skid Plate, LH 0 9 9-0 Auger Assembly, RH 9 9-09 Auger Assembly, LH -99 O-Ring -00 Bushing, Flange / -8 Washer, Thrust / -8 Bearing, Thrust / -0 Shaft, Impeller -8 Washer, Thrust /8 8-8 Bushing, Flange /8 9 00-8 Screw, Hex Head /-8 x / 0 08 - Plug, Case -88 Housing, Gearbox, RH -98 Seal, Oil -0 Bushing, Flange, " 8 9-8 Key, Square / x / x /8-9 Gear, Worm - Shaft, Auger -8 Housing, Gearbox, LH 8 8-0 Impeller Assembly 9 8 8 0- Screw, Hex Head /-0 x -/8 0 - Gasket, Gearbox 8-0 Pin, Roll / x -/8 0 8- Washer, Flat / 8 8- Kit, Shear (Contains each of Key Numbers 9 and 8) NOTE: All component dimensions given in U.S. inches inch =. mm
CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) 9 8 0 9 9 8 0 8 0 8
CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) KEY PART NO. NO. DESCRIPTION 8 - Knob, Lever 8 0 0-0 Screw #0- x /8 8 - Strap, Slotted 8 80 0-00 Nut, Lock /8-89 - Washer, Flat /8 8-9 Control Assembly, Chute Rotater 8 0-89 Support, Pivot 8 00-8 Screw, Hex Head /-8 x / 9 8 0- Knob, Defl ector 0 8-00 Bolt, Shoulder 0 8- Washer, Flat / 8 80 0-00 Nut, Lock /-0 8 0-0 Bolt, Carriage /-8 x /8 9- Washer, Nylon 8-0 Chute Assembly 8 - Deflector Assembly 9- Seal, Deflector 8 8- Rivet, Blind 9 8 - Knob, Speed Control Lever 0 8 0-0 Bolt, Carriage /-8 x / - Washer, Flat 8 8 0-8 Screw, Hex Head /-8 x -/ - Nut, Lock /-8 9- Lever Assembly, Speed Control 9- Retainer, Hairpin 8 8 0- Rod, Upper, Speed Control 9 8 - Rod, Lower, Speed Control 0 9-0 Clamp, Clean-Out Tool 9-99 Tool, Clean-Out 8 80 0-00 Nut, Lock /-8 NOTE: All component dimensions given in U.S. inches inch =. mm
HANDLES SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) 8 9 8 0 9 8 0 0 0
HANDLES SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) KEY PART NO. NO. DESCRIPTION 8-0 Lever, Auger Control, RH 8-09 Lever, Traction Drive Control, LH 9-9 Nut, Cage /-0 88-88 Bushing, Flange 9- Retainer, Hairpin 8 0-0 Screw, Hex Head /-0 x / 8- Rod, Interlock 8 8 0-0 Tube Assembly, Interlock, RH 9 8- Tube Assembly, Interlock, LH 0 8-0 Panel, Control 8 8 0- Screw, Hex Head /-8 x -/ 8 8 0-8 Screw, Hex Head /-8 x -/ 8-0 Handle Tube, LH 8-08 Handle Tube, RH 8 80 0-00 Nut, Lock /-8 89 - Washer, Flat /8 88-99 Knob, Handle 8 8-9 Rod, Auger Control 9 9 0-8 Rod, Traction Control 0 8 0-8 End, Control Rod 8 0-00 Nut, Hex, Jam /-8 8 0-8 Bolt, Carriage /8- x -/ 8 0-8 Handle Tube, Lower 8 0- Sleeve, Spring 8 09- Spring, Traction Drive 8-9 Spring, Auger Control 8 0- Screw, Hex Head /8- x 8 8 0-9 Clip, Panel 0 8 - Console, Panel - Screw, Hex Head, Tapping #0- x -/ 8 - Screw, Hex Head, Tapping #0- x / 8 - Latch, Interlock 8-8 Bolt, Shoulder 0 80-8 Nut, Lock /-0 88- Spring, Torsion 8-8 Spring, Interlock NOTE: All component dimensions given in U.S. inches inch =. mm
DRIVE SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) 8 9 0 9 8 0 9 8 0 8 9 0 8
DRIVE SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) KEY PART NO. NO. DESCRIPTION - Screw, Hex Head /-8 x / 8 80 0-00 Nut, Lock /-8 - Washer, Flat 8 9 0-08 Screw, Hex Head /-8 x / 8 00- Bearing, Flange 8 0- Shaft, Auxiliary 9-0 Spacer, Plate 8 9 9-0 Plate, Auxiliary 9 8 00-8 Gear, Intermediate (/8) 0 8 00- Gear, Pinion 8 - Rod, Clutch 8 00- Shaft, Long, Hex 88-0 Pin, Pivot 8 0-80 Lever, Shifter / Wheel - Trunnion Bearing Assembly 8 8- Bracket, Pivot, Shift 98- Ring, Rubber Wheel 8 8 0-8 Plate, Rubber Wheel 9 8 9 0-00 Nut, Lock /-8 0 8- Hub, Rubber Wheel 8 0- Screw, Hex Head /-8 x /8 08-9 Retainer, Hairpin 8 0- Spring, Bias 8 00-8 Gear, Axle (8 Teeth) 8-9 Pin, Pivot Lever - Plate Assembly, Drive 9- Shaft, Axle 8-0 Shaft, Short Hex 9 8 0- Lever, Shifter Plate 0 8 0- Bracket, Shifter Support 8 0-0 Bolt, Carriage /-8 x /8 88-9 Key, Square / x / x /8 8 89-09 Bearing, Flange 8 0- Plate, Drive Mounting 8-0 Spacer, Bearing 9 0-80 Pulley, Traction Drive - Nut, Lock /-8 8 89-0 Washer, Flat 9 80 0 0-00 Washer, Lock / 0 8 9 0- Screw, Hex Head /-8 x / 8 00 00- Ring, Retaining - Washer.0 x 8. x.0 90-9 Spring, Return 8-0 Pin, Roll NOTE: All component dimensions given in U.S. inches inch =. mm 9
CHASSIS / ENGINE / PULLEYS SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) 0 9 8 0 9 0 8 0 9 8 8 9 0 0 9 8 0
CHASSIS / ENGINE / PULLEYS SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) KEY PART NO. NO. DESCRIPTION 8 0- Spring, Traction Idler 8 0- Pulley, Idler (-/) - - - Engine, Tecumseh, Model Number OH9SA (Order parts from Engine manufacturer) 8 8 0-0 Screw, Hex Head /-8 x -/ 00-8 Screw, Hex Washer Head /-8 x / 0 9-89 Washer, Flat 8 9 0-00 Nut, Jam, Lock /-8 8-0 Pin, Idler Pivot 9 90-9 V-Belt, Traction Drive 0 80 0 0-00 Washer, Lock / 8 9 0-08 Screw, Hex Head /-8 x / 9-9 Idler Arm Assembly, Impeller 08-9 Retainer, Hairpin 88-8 Spring, Brake 8 - V-Belt, Impeller Drive 9-0 Screw, Hex Head /8- x -/ 8 8-0 Arm, Idler 8 8 8 0- Screw, Hex Head /-8 x -/ 9 - Bushing, Idler Pivot 0 8 0- Pulley, Idler (-/) 8 0- Screw, Hex Head /-8 x 9- Spacer, Engine Pulley 8 0-8 Pulley, Engine, Traction Drive 9- Pulley, Engine, Impeller Drive 0 - Washer, Flat /8 8 0- Washer, Lock /8 8 0-8 Screw, Hex Head /8- x -/8 KEY PART NO. NO. DESCRIPTION 8 - Guide, Belt 9 9-9 Cover, Belt 0 88-0 Cover, Toolbox 8 9 0-08 Screw, Hex Head /-0 x / 9- Bolt, Shoulder /-8 8 8- Bellcrank Shifter 8 0-0 Screw, Hex Head /-8 x / 9-0 Arm, Auger Control 8 80 0-00 Nut, Lock /-8 8 0-8 Bellcrank Assembly 8 8-0 Link, Speed Control 9 9-0 Trunnion, Pivot Bracket 0 88-90 Nut, Cage /8-0 0-9 Hairpin, Cotter / x / 90- Pin, Pivot Bracket 8 0-8 Bracket, Bellcrank 8 8 0- Screw, Hex Head /8- x -/ 8 0- Bracket, Impeller Idler Arm 8 0-8 Pan, Frame Bottom 8 0 0- Screw, Hex Head /-8 x / 8 8 - Nut, Speed /-8 9 8-0 Frame Assembly 0 8 8-9 Plate, Frame End 9 9-08 Shaft, Auger Control 0 0-9 Washer, Hardened 9 - Roller 9 - Ring, Crescent 8 00 00-0 E-Ring NOTE: All component dimensions given in U.S. inches. inch =. mm
WHEELS / DECALS SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) 0 9 8 0
WHEELS / DECALS SNOW THROWER - - MODEL NUMBER SB0C (PRODUCT NUMBER 9-00) KEY PART NO. NO. DESCRIPTION 8 9-0 Wheel Assembly, ", LH - Pin, Klik / 8 9-0 Wheel Assembly, ", RH - Screw, Hex Head /-8 x / 98-0 Bearing, Axle -9 Washer, Thrust, " NOTE: All component dimensions given in U.S. inches inch =. mm KEY PART NO. NO. DESCRIPTION 8 0- Decal, Danger 8 9- Decal, Partner 8 0- Decal, Danger, Defl ector 8 0- Decal, Danger 8 9- Decal, Partner 8 0-0 Decal, Instruction 8 0- Decal, Traction Lever 8 8 0- Decal, Auger Lever 9 8 0- Decal, Speed Control 0 8 - Decal, Height Adjust 8 0-8 Decal, Belt Guard 8 0- Decal, Fuel Shut-Off 8 0- Decal, Sound Level - - 8-8 Operator s Manual, European - - 8-8 Operator s Manual, Scandinavian - - 8-89 Operator s Manual, East Bloc Euro - - 9-09 Repair Parts Manual, English NOTE: All component dimensions given in U.S. inches inch =. mm
SERVICE NOTES
SERVICE NOTES
LIMITED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materials and work man ship. For a period of two () years from date of purchase by the original consumer purchaser, we will repair or replace, at our option, without charge for parts or labor incurred in replacing parts, any part which we fi nd to be defective due to materials or workmanship. This Warranty is subject to the following limitations and exclusions:. This warranty does not apply to the engine. Please contact your nearest dealer where they will send the machine to the engine manufacturer.. Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser. Transportation charges for any parts submitted for replacement under this warranty must be paid by the purchaser unless such return is requested by your dealer.. Battery Warranty: On products equipped with a Battery, we will replace, without charge to you, any battery which we fi nd to be defective in manufacture, during the fi rst ninety (90) days of ownership. After ninety (90) days, we will exchange the Battery, charging you / of the price of a new Battery for each full month from the date of the original sale. Battery must be maintained in accordance with the instructions furnished.. The Warranty period for any products used for rental or commercial purposes is limited to 90 days from the date of original purchase.. This Warranty applies only to products which have been properly assembled, adjusted, operated, and maintained in ac cor - dance with the instructions furnished. This Warranty does not apply to any product which has been subjected to alteration, misuse, abuse, improper assembly or installation, delivery damage, or to normal wear of the product.. Exclusions: Excluded from this Warranty are belts, normal wear, normal adjustments, stan dard hardware and normal maintenance.. In case of any problem within the boundaries of this warranty, contact the nearest department store, indicate the model number, serial number and the date of purchase of your machine. This warranty does not apply to accidental damages. All implicit warranties are limited to the same time frames. Or contact: E.M. Services Rue Lambrechts 900 Courbevoie France Telephone: () 808 Fax: () 809 THIS WARRANTY DOES NOT APPLY TO INCIDENTAL OR CONSEQUENTIAL DAMAGES. ANY IMPLIED WAR RAN TIES ARE LIMITED TO THE SAME TIME PERIODS STATED HEREIN.