HYPERION EOS0610iNET Ports & Net Cable CHARGER 1 (MASTER) CHARGER 2 (SLAVE) DC CABLE DC CABLE 2X16 LCD 2X16 LCD PC DATA PORT OUTPUT PORT PC DATA PORT OUTPUT PORT TEMP SENSOR TEMP SENSOR CHG to CHG Link Port Output 6Cell Lithium Balancer Connector CHG to CHG Link Port Output 6Cell Lithium Balancer Connector CHARGER to CHARGER Optional NetWork Cable #HP-EOS0610-MSC
MENU FLOW CHARTS HYPERION RC EOS0610i-Single MASTER MEMORY -2SEC DATA VIEW BALANCER INFOR -2SEC USER SET Operation Start Balancer Start Charge Operation Balancer Operation SLAVE MEMORY -2SEC DATA VIEW BALANCER INFOR -2SEC USER SET Operation Start Balancer Start Charge Operation Balancer Operation
MEMORY (CHARGE) LiIo/LiPo/A123 NiCd/NiMH Pb A123 9.9V 2300 BATT TYPE A123 A123 9.9V 2300 BATT TYPE A123 NiMh 7.2V 1800 BATT TYPE NiMh BATT VOLTS 7.2Vpack ( 6S) Pb 12.0V 14500 BATT TYPE Pb BATT VOLTS 12Vpack ( 6S) BATT VOLTS 9.9Vpack ( 3S) BATT CAPACITY 2300mAh BATT VOLTS 9.9Vpack ( 3S) BATT CAPACITY 2300mAh BATT CAPACITY 1800mAh CHG CURRENT 1.8A PEAK SENS. 3mV/C BATT CAPACITY 14500mAh CHG CURRENT 7.0A TEMPERATURE CUT-OFF 50`C CHG CURRENT 10.0A TEMPERATURE CUT-OFF 50`C CHG CURRENT 10.0A TEMPERATURE CUT-OFF 50`C TRICKLE 0mA PEAK DELAY 3min TEMPERATURE CUT-OFF 50`C SAFETY TIMER 120MIN SAFETY TIMER 120MIN TCS CAPACITY 100% (SOUND) SAFETY TIMER 120MIN TCS CAPACITY 100% (SOUND) SAFETY TIMER 90MIN CHG CAPACITY LIMITED 100%
DATA VIEW [ DATA VIEW ] INPUT 0.000V OUTPUT 0.000V BAT. RES 000mΩ TEMP ----- `C PEAK.T 000.0`C CHG TIME 000min 00sec CHG C. 00000mAh PEAK.V 0.000V
BALANCE INFORMATION [ BALANCER ] 0CELLS 00.000V -2SEC SEPARATE SYNC SELECT [0CL] VOLTAGE 00.000V -2SEC -2SEC AVG. V 00.000V GAP V 00.000V 0CELLS [ 00.0V] 0CELLS [ 00.0V] 0CELLS [ 00.0V] 0.00 0.00 0.00V 0.00 0.00 0.00V Balancer Operation Balancer Operation
USER SET [USER SET] TEMP `C BUTTON SOUND ON [USER SET] TEMP `C BUTTON SOUND ON FINISH SOUND TIME 5sec FINISH SOUND TIME 5sec FINISH SOUND MELODY 1 FINISH SOUND MELODY 1
START SET > NiCd / NiMh Battery Start NiMh 7.2V 3300-2SEC AUTOMATIC AUTOMATIC NOMAL LINEAR -2SEC
LiIo (Ion 3.6v) / LiPo (3.7v) / A123-LiFePO4 (3.3v) Battery Start PB Battery Start A123 9.9V 2300 Pb 12.0V 45000-2SEC -2SEC NO BALANCER SOLO SYNC CC/CV -2SEC -2SEC -2SEC -2SEC SELECT CELLS [ 0CELLS] 00.0V DEC INC CONNECTED CELLS [ 0CELLS] 00.0V [ 0CELLS] 00.0V 1 [ 0CELLS] 00.0V 2 ** BALANCER ** ** ADVISED! **
8. and FINISH [SOLO-RUNNING] -> SOLO mode balance [SYNC-RUNNING] -> SYNC mode balance [ **COMPLETE** ] -> Balance complete LiIo -> Lithium-ion battery LiPo -> Lithium polymer battery A123 -> Lithium Fe battery AUTO : AUTOMATIC NORM : NORMAL LINE: LINEAR SOLO : SOLO SYNC : SYNC CcCv: CC-CV A123 SYNC 000:00 If button is pressed, each parameter should be changed and moved every 2 seconds. Output current Output voltage Connected cell number Connected Pack voltage [ BALANCER ] 6CELLS 00.000V A123 CHG 000:00 A123 CHG 000:00 Selected cell number cell voltage The decimal point should be changed to square box depending on the balancing status. The meaning of the square box is cell discharging. SELECT [0CL] VOLTAGE 00.000V AVG. V 00.000V GAP V 00.000V 3 65 3.62 3 66V 3 63 3 64 3.62V CAPA. 00000mAh INPUT 00.000V TEMP 0.0`C PEAK.T 0.0`C PEAK.V 0.000V BAT. RES 000mΩ TCS CAP. 000% FINISH Output current, Output voltage Charge capacity Input voltage Battery temperature Battery peak temperature Battery peak voltage Battery internal resistance TCS capacity A123 CHG 000:00 END:CC/CV Finish status display "END:DELTA-PEAK " "END:CC/CV " "END:TEMPERATURE" "END:CAPACITY " "END:TIMER " "END:TCS CAP. " A123 9.9V 2300-2SEC