WARNING : - PDF Free Download

! WARNING : All the pneumatic tools should only be used as hand operated tools. They are powered by compressed air and are not insulated against electric shock. Always turn off the air supply and disconnect the air hose before changing or replacing any inserted tool and accessory. Before using these tools, make sure that all couplings and plugs are securely fastened. hoses which are under pressure may lash out when disconnecting, that can lead to serious injury! High sound levels may cause hearing damage. Always wear hearing protection when operating this tool. Wearing eye/face protection can reduce the danger of high-speed materials being emitted from the tool. Make sure that the direction of the spark generated from the cutting wheel grinding wheel or shank stone is properly directed so as to not create a hazard.. Always wear gloves to reduce risk User must wear proper clothing. Loose clothing, long hair, stings, straps, belts and jewelry should not be worn when operating this tool. Long periods of prolong use will cause fatigue. Periodic breaks are recommended for user safety. It is recommended to stop operating the tool whenever discomfort, tingling or pain occurs during use. Make sure there is no gas or combustible material stored near the tool when servicing, changing insert tools, or storage. Wearing proper breathing protection to avoid inhale dust or handling debris from working process, which can be harmful to the health. www.mighty-seven.com

2 www.mighty-seven.com

A STRONG BRAND LISTENS TO ITS CUSTOMERS When we develop products such as our new, extremely small and handy air impact wrench NC-460, m7 customers are our main driving force and focus. By building trust and excellent communication channels with our partners, distributors and channel customers, we very quickly get to understand what it is that they are looking and what motivates their choice of air tools. As a designer, manufacturer and distributor of tools, we are just as committed to bringing the most reliable, efficient, ergonomic tools to the market as we are to fulfilling our promise of excellent service and support to our clients. 'S SUCCESS IS A TEAM EFFORT! m7 as it is affectionately called by thousands of users world-wide, is much more than just a good manufacturer of air tools. In fact, m7 provides a total brand solution for its air tool partners and consumers. m7's team is composed of a strong network of International air tool experts and an enthusiastic team of engineers, designers, marketeers and administration personnel. 3 www.mighty-seven.com 3

4 www.mighty-seven.com

EXPERTISE FOR A GLOBAL MARKET m7 clients are very demanding and nothing short of excellence in product quality and fully committed support will do for them. We may sometimes feel that it is a lot to ask of a relatively new brand, but we embrace the challenge with open arms. We have been manufacturing tools for decades and our expertise in that field helps us better understand our clients needs. In terms of quality, we ensure that all the m7-branded products that we sell reflect our commitment to providing tools that are extremely reliable and perform. In order to achieve our standards of quality, our tools are tested thoroughly in our factory, using equipment such as computerized fatigue testing machines, digital torque testing machines, multifunctional testing machines, grinding efficiency testers, run-out testers, digital measuring projectors, environmental testing chamber, grinding and polishing machines, infrared tachometers, vibrations testers and decibel level detectors. 5 www.mighty-seven.com 5

LEVEL IDENTIFICATION LevelAs of today, m7 offers a wide Pneumatic product spectrum. And how does m7 know which tools you need? m7 listens to you. identification 6 www.mighty-seven.com

level The air tools in this section have been categorized into three distinctive levels for user convenience (for reference only). application Efficiency / Performance Easy to use to handle tasks quickly, these tool embody efficiency and performance. Strength Tools provide high torque force, superior grinding power and high cutting energy. Endurance Built to last, product longevity and low failure rate are characteristics associated with these tools. Application icons have been designed to provide visual references that suggest industry specific features or usability. These application icons are for reference only. CONTENT 2-8 - 40-42 - 48-56 - 64-68 - 76-77 - 82-90 - 99-02 - 06-07 - 4-6 - 8-20 - 30-34 - 36-38 - 42-64 - 66-70 - 79 - BRAND NEW APPEARANCE AIR IMPACT WRENCH REPAIR KIT AIR RATCHET WRENCH AIR DIE GRINDER AIR ANGLE GRINDER AIR BELT SANDER AIR SANDER AIR PISTOL SANDER AIR CUTTING TOOLS AIR DRILL AIR SCREWDRIVER SPRING BALANCER AIR HAMMER AIR NEEDLE SCALER AIR HYDRAULIC RIVETER AIR NAILER / AIR STAPLER AIR GREASE GUN AIR BLOW GUN AUTO REPAIR TOOL FILTER, REGULATOR, LUBRICATOR AIR HOSE MOBILE CABINETS CORDLESS TOOLS & TORQUE WRENCH IMPACT SOCKET AFTER MARKET SUPPORT ACCESORIES RETAILER PROMOTION TROUBLE SHOOTING 7 www.mighty-seven.com 7

8 www.mighty-seven.com

GLOBAL EXPANSION Although we have been in the industry for more than 2 decades, m7 has only existed as a brand for a few short years. Nevertheless, the inroads that we have made in many important markets, such as automotive, have led us to believe that our combination of great partner support and quality air tools is our key to succeeding. m7 has made its bed and the focus is clearly on providing the right combination of marketing support, customer training and new product development as the way forward. When we print our slogan greater partner support we see it not so much as wishful thinking, but more as a m7 truth, a code by which we live daily. m7 training program 9 www.mighty-seven.com 9

0 www.mighty-seven.com

www.mighty-seven.com

2 www.mighty-seven.com

NC-4255Q NC-4265Q NC-4255QP /2" DRIVE AIR IMPACT WRENCH 8 pieces in one carton Twin Hammer Type inlet : /4" The front housing & back head cover made by magnesium alloy Durability composite material NC-4265 is equipped with 2'' extended anvil NC-4255PVC Protective boot NC-4255QP With boot on Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² NC-4255Q /2" "(25) 200-800(27-085) 200 627 8500 4.8(36) 90(6.3) 7-/32"(79) 3.7.70 3/8" 85.0 4.7 NC-4265Q /2" "(25) 200-800(27-085) 200 627 8500 4.8(36) 90(6.3) 9-/32"(230.5) 4.0.80 3/8" 85.0 4.7 3 www.mighty-seven.com 3

AIR IMPACT WRENCH AIR IMPACT WRENCH NC-3920 3/8" DRIVE AIR IMPACT RATCHET Unicorn Hammer Type inlet : /4" 0 pieces in one carton Ratchet wrench design (Patented impact hammer mechanism) Non-reaction Compact, lightweight, dust free head-sealed Ergonomic design, comfort and convenience for using at confined area NC-360Q 3/8" Jumbo Hammer Type inlet : /4" DRIVE AIR IMPACT WRENCH 0 pieces in one carton NC-320 3/8" Twin Hammer Type inlet : /4" DRIVE AIR IMPACT WRENCH 0 pieces in one carton NC-383 3/8" Twin Dog Type inlet : /4" DRIVE AIR IMPACT WRENCH 0 pieces in one carton NC-382 3/8" Twin Dog Type inlet : /4" DRIVE AIR IMPACT WRENCH 2 pieces in one carton NC-380 3/8" Twin Dog Type inlet : /4" DRIVE AIR IMPACT WRENCH Butterfly type forward/reverse trigger 80 degree turnaround air inlet Three speed adjusting switch NC-340 3/8" Rocking Dog Type inlet : /4" DRIVE AIR IMPACT WRENCH 20 pieces in one carton 20 pieces in one carton 4 www.mighty-seven.com

NC-390 NC-39 DRIVE AIR DRIVE AIR 3/8" IMPACT WRENCH 3/8" IMPACT WRENCH Twin Dog Type Twin Dog Type inlet : /4" inlet : /4" 2 pieces in one carton 2 pieces in one carton RA- 3/8" Twin Hammer Type inlet : /4" DRIVE AIR IMPACT WRENCH 20 pieces in one carton Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NC-320 3/8" /2"(3) 00-300(36-407) 350 474 0000 4.0(3) 90 (6.3) 5-5/8" (42) 3.3.50 3/8" 92. 3.6 NC-340 3/8" 3/8"(0) 5-50(7-68) 75 02 0000 2.5(7) 90 (6.3) 6-/4" (59).7 0.80 3/8" 92. 3.6 NC-360Q 3/8" /2"(3) 00-300(36-407) 350 474 8000 4.4(24) 90 (6.3) 4-9/6" (5.5) 3.3.50 3/8" 85.0 2.8 NC-380 3/8" 3/8"(0) 5-50(7-68) 75 02 000 2.3(65) 90 (6.3) 5-5/32" (39). 0.50 3/8" 9.0 3.6 NC-382 3/8" M0~M2 66 (90) 77 240 8000 0(283) 90 (6.3) 7-3/64" (90) 2.3.06 3/8" 97.0 5. NC-383 3/8" 5/32"(M2) 8(0) 77 240 8000 0(283) 90 (6.3) 7-9/32" (85) 2.9.34 3/8" 93.0 4.9 NC-390 3/8" 5/6"(8) 37(50) 66 90 8500 8.5(240) 90 (6.3) 0-7/6"(265) 3.5.60 3/8" 90.0 5. NC-39 3/8" 3/8"(0) 44(60) 96 30 7000 7.0(98) 90 (6.3) 9-7/6"(240) 3.6.62 3/8" 92.0 5. NC-3920 3/8" 5/6"(8) 0-35(3.5-47) 50 68 700 7.0(87.7) 90 (6.3) 6-7/6"(64).3 0.6 3/8" 90.0 5. RA- 3/8" 5/6'' (8) 3.7-36.9(5-50) 50 68 8500 8.5(255) 90 (6.3) 8-/4"(208) 2.2.0 3/8'' 96.7 4.9 www.mighty-seven.com 5

AIR IMPACT WRENCH AIR IMPACT WRENCH NC-4232Q /2" DRIVE AIR Twin Hammer Type IMPACT WRENCH inlet : /4" 0 pieces in one carton WON PTEN tools U.S.A Sophisticated and powerful tool: m7 s most advanced composite mini air impact wrench that can use in narrow space. Unbelievable light and compact with only.35kg Quiet series: sound pressure only 83 Dba m7 s unique lazy design that can operate forward/reverse switch with one hand. Twin-hammer impact mechanism provides more torque power and stability, and balanced impact can reduce the vibration. Ergonomic switch design well suited for operator s hand that provides fingers with most comfortability and controllability. m7 s unique shark fin shaped body design that creates an esthetics of speed and explosiveness. NC-420 /2" Twin Hammer Type inlet : /4" DRIVE AIR IMPACT WRENCH 0 pieces in one carton 64% Lighter 30% Shorter NC-423 NC-4223 /2" Twin Hammer Type inlet : /4" DRIVE AIR IMPACT WRENCH 0 pieces in one carton NC-4223 is equipped with 2'' extended anvil Common applications are tyre lanes, heavy maintenance. 6 www.mighty-seven.com

NC-422 NC-4222 NC-426 NC-4226 DRIVE AIR DRIVE AIR /2" IMPACT WRENCH /2" IMPACT WRENCH Twin Hammer Type Twin Hammer Type inlet : /4" inlet : /4" NC-4226 is equipped with 2'' extended anvil NC-4222 is equipped with 2'' extended anvil 8 pieces in one carton 45% Lighter 0 pieces in one carton NC-427 DRIVE AIR /2" IMPACT WRENCH Twin Hammer Type inlet : /4" 0 pieces in one carton Common applications include overall automotive service and tyre lanes NC-4230 NC-4230Q NC-4240 /2" Twin Hammer Type inlet : /4" DRIVE AIR IMPACT WRENCH NC-4240 is equipped with 2'' extended anvil 8 pieces in one carton Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NC-420 /2" 5/8"(6) 50-350(203-475) 400 542 0000 4.2(9) 90 (6.3) 5-5/8"(42) 3.5.60 3/8" 90.6 2.8 NC-422 /2" 5/8"(6) 50-300(203-407) 550 746 7000 4.0(3) 90(6.3) 7-3/64"(82) 6.2 2.80 3/8" 86. 3.7 NC-4222 /2" 5/8"(6) 50-300(203-407) 550 746 7000 4.0(3) 90(6.3) 9-3/64"(233) 6.6 3.00 3/8" 86. 3.7 NC-423 /2" 5/8"(6) 80-400( 244-542) 600 83 6500 4.2(9) 90(6.3) 7-3/6"(82) 6.2 2.80 3/8" 9.0 3.8 NC-4223 /2" 5/8"(6) 80-400( 244-542) 600 83 6500 4.2(9) 90(6.3) 9-/4"(232) 6.4 2.90 3/8" 9.0 3.8 NC-426 /2" 5/8"(6) 80-400(244-542) 650 88 9000 4.2(9) 90(6.3) 7-3/4"(95) 4.4 2.00 3/8" 93.9 4.5 NC-4226 /2" 5/8"(6) 80-400(244-542) 650 88 9000 4.2(9) 90(6.3) 8-7/8"(225) 4.8 2.20 3/8" 93.9 4.5 NC-427 /2" 5/8"(6) 50-320(203-434) 400 542 7000 4.2(9) 90(6.3) 7-/4"(84) 5.6 2.50 3/8" 92. 3.7 NC-4230 /2" 3/4"(9) 80-500(244-678) 700 949 7500 4.5(27) 90(6.3) 6-5/32"(64) 5.5 2.50 3/8" 87.0 4.5 NC-4240 /2" 3/4"(9) 80-500(244-678) 700 949 7500 4.5(27) 90(6.3) 8-5/32"(25) 5.7 2.60 3/8" 87.0 4.5 NC-4230Q /2" 3/4"(9) 80-500(244-678) 650 88 6500 4.5(27) 90(6.3) 6-5/32"(64) 5.5 2.50 3/8" 85.0 4.5 NC-4232 /2" 5/8"(6) 00-400(36-542) 550 746 0000 4.0(3) 90 (6.3) 4-3/4"(20) 3.0.38 3/8" 83.0 3.7 www.mighty-seven.com 7

AIR IMPACT WRENCH AIR IMPACT WRENCH NC-4233Q /2" DRIVE AIR IMPACT WRENCH Twin Hammer Type inlet : /4" 45% Lighter Rotor blades attached with springs which prolong durability. Shorter air inlet path to boost air efficiency simple mechanism for easy maintenance inlet 360 degree swivel. Composite material light design 3 setting forward power regulator for controlled run up. NC-4233TL /2" Twin Hammer Type DRIVE AIR IMPACT WRENCH inlet : /4" NC-423Q /2" DRIVE AIR IMPACT WRENCH Twin Hammer Type inlet : /4" 0 pieces in one carton Forward operation torque is limited 50 ~ 80 Nm for vehicle tire service. 6 rotor-blades makes efficient starting torque. 8 pieces in one carton NC-4236 NC-4236Q /2" DRIVE AIR IMPACT WRENCH Twin Hammer Type inlet : /4" 8 pieces in one carton NC-4250Q /2" DRIVE AIR IMPACT WRENCH Twin Hammer Type inlet : /4" 8 pieces in one carton 60% more Powerful 8 www.mighty-seven.com

NC-460 NC-460Q /2" DRIVE AIR IMPACT WRENCH Best in class performance for a tool of just 5.5 mm long and weight.6 Kg. The minimum size of this tool will allow greater access to tight and limited spaces. Small but with greater power. Reach 450-ft-lb in just 5 seconds. Low noise sound level 85 db. Common application to narrow working place and Agricultural maintenance. Powerful yet compact. 0 pieces in one carton Jumbo Hammer Type inlet : /4" 64% Lighter 60% Shorter NC-4256 NC-4256Q NC-4266 /2" DRIVE AIR IMPACT WRENCH Twin Hammer Type inlet : /4" NC-4266 is equipped with 2'' extended anvil 0 pieces in one carton NC-4258 DRIVE AIR /2" IMPACT WRENCH Twin Hammer Type inlet : /4" 0 pieces in one carton Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NC-423Q /2" 5/8"(6) 200-350(27-475) 450 60 0000 4.2(20) 90(6.3) 6-5/6"(60) 2.8.30 3/8" 83.0 3.0 NC-4233Q /2" 3/4"(9) 200-500(27-678) 850 52 9000 4.6(32) 90(6.3) 7-/2"(90) 4.6 2.0 3/8" 85.0 4.4 NC-4233TL /2" 3/4"(9) 37-59(50-80) 59 80 2800 4.6(32) 90(6.3) 7-/2"(90) 4.6 2.0 3/8" 85.0 4.4 NC-4236 /2" "(25) 200-700(27-949) 000 356 7500 5.5(55) 90(6.3) 6-45/64"(7) 5.7 2.60 3/8" 87.0 4.5 NC-4236Q /2" "(25) 200-700(27-949) 000 356 7500 5.5(55) 90(6.3) 6-45/64"(7) 5.7 2.60 3/8" 83.0 4.5 NC-4250Q /2" 5/8"(6) 200-350(27-475) 450 60 9000 4.4(24) 90(6.3) 4-5/6"(25) 3.5.60 3/8" 83.0 4.5 NC-4256 /2" "(25) 200-900(27-220) 00 49 7000 5.(44) 90(6.3) 5-9/6"(4) 4.0.80 3/8" 95.0 2.8 NC-4256Q /2" "(25) 200-900(27-220) 000 356 7000 5.(44) 90(6.3) 5-9/6"(4) 4.0.80 3/8" 85.0 2.8 NC-4266 /2" "(25) 200-900(27-220) 000 356 7000 5.(44) 90(6.3) 7-9/6"(9) 4.2.90 3/8" 85.0 2.8 NC-4258 /2" 5/8"(6) 50-300(203-407) 400 542 7000 4.2(9) 90(6.3) 7-/4"(85) 5.6 2.50 3/8" 93.2 4.4 NC-460 /2" 5/8"(6) 200-350(27-475) 450 60 9000 4.4(24) 90 (6.3) 4-9/6"(5.5) 3.5.60 3/8" 93.0 2.8 NC-460Q /2" 5/8"(6) 200-350(27-475) 400 542 9000 4.4(24) 90 (6.3) 4-9/6"(5.5) 3.5.60 3/8" 85.0 2.8 www.mighty-seven.com 9

AIR IMPACT WRENCH AIR IMPACT WRENCH NC-4650 /2" DRIVE AIR Jumbo Hammer Type IMPACT WRENCH inlet : /4" + Ergonomic design, lightweight.4kg + Excellent Max torque 900NM(650FT/LB) + Mini type with overall length 04mm, ultralight and easy to use. 0 pieces in one carton NC-46Q /2" Jumbo Hammer Type inlet : /4" DRIVE AIR IMPACT WRENCH m7 3rd generation super mini in length mm. 0 pieces in one carton NC-4620QN /2" DRIVE AIR IMPACT WRENCH Jumbo Hammer Type inlet : /4" 0 pieces in one carton 2" Extended Anvil matching special double sided socket 7mm&9mm and 2mm&22mm specifically for automotive tyres. Reduce physical loading 40%. NC-4630 NC-4630Q /2" DRIVE AIR IMPACT WRENCH Jumbo Hammer Type inlet : /4" NC-48 /2" Twin Dog Type inlet : /4" DRIVE AIR IMPACT WRENCH 2 pieces in one carton 68% Lighter 60% Shorter 0 pieces in one carton 20 www.mighty-seven.com

NE-399/499 3/8"&/2" 8 pieces in one carton DRIVE AIR ANGLE Jumbo Hammer Type IMPACT WRENCH inlet : /4" Max. torque 250ft-lb. Forward & reverse ring control. Composite rubber covered grip to increase holding feel. Jumbo-hammer mechanism. NE-462 /2" DRIVE AIR ANGLE IMPACT WRENCH 0 pieces in one carton Pin Clutch Type inlet : /4" Pin-Clutch design mechanism generates 00 Nm torque output. Fasten to Stop design provides comfortable feel. NC-420N NC-460N NE-499N DRIVE AIR DRIVE AIR DRIVE AIR ANGLE /2" IMPACT WRENCH /2" /2" IMPACT WRENCH IMPACT WRENCH Twin Hammer Type inlet : /4" Twin Hammer Type inlet : /4" inlet : /4" inlet : /4" stubby impact sockets, 6 points:5pcs 3,7,9,22,24 mm stubby impact sockets, 6 points:5pcs 3,7,9,22,24 mm Angle Impact Wrench:pc (NE-499) Stubby impact sockets, 6 points: 9pcs 9, 0,, 3, 4, 7, 9, 22, 24 mm /4" plug:pc Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NC-460N /2" 5/8"(6) 200-350(27-475) 450 60 9000 4.4(24) 90(6.3) 4-9/6"(5.5) 3.5.60 3/8" 93.0 2.8 NC-420N /2" 5/8"(6) 50-350(203-475) 400 542 0000 4.2(9) 90(6.3) 5-5/8"(42) 3.5.60 3/8" 90.6 2.8 NC-4630 /2" 5/8"(6) 200-350(27-475) 450 60 9000 4.4(24) 90(6.3) 3-27/32"(97) 3.3.50 3/8" 96.0 2.8 NC-4630Q /2" 5/8"(6) 200-350(27-475) 450 60 9000 4.4(24) 90(6.3) 3-27/32"(97) 3.3.50 3/8" 85.0 2.8 NC-4650 /2" 5/8"(6) 80-400(244-542) 650 900 9000 4.69(32.8) 90(6.3) 4-/6"(04) 3.3.40 3/8" 95.0 2.4 NC-48 /2" 9/6"(M4) 8-40 (60-89) 20 285 5500 8.5(240) 90(6.3) 0-9/32" (260) 3.7.70 3/8" 85.0 5.3 NE-462 /2" ----- 0-55(3.5-74) 74 00 200 4.0(3.28) 90(6.3) 3"(330) 4..88 3/8" 84.0 2.5 NE-499 /2" 9/6''(4) 50-50(68-203) 250 339 7500 2.45(69.4) 90(6.3) 3-3/8"(340) 4.0.83 3/8" 93.0 9.9 NE-399 3/8" /2''(3) 50-30(68-76) 80 244 7500 2.45(69.4) 90(6.3) 3-3/8"(340) 4.0.83 3/8" 93.0 9.9 NC-46Q /2" 5/8"(6) 200-350(27-475) 450 60 0000 4.0(3) 90(6.3) 4-3/8"() 3.3.50 3/8" 85.0 2.8 NC-4620QN /2" 5/8"(6) 200-350(27-475) 450 60 9000 4.4(24) 90(6.3) 6-9/6"(66) 3.7.70 3/8" 85.0 2.8 www.mighty-seven.com 2

AIR IMPACT WRENCH AIR IMPACT WRENCH NC-4255PVC Protective boot The NC-4255-PVC Protective boot can apply on NC-6255 NC-6255Q 3/4" Light weight.9kg DRIVE AIR IMPACT WRENCH The front housing & back head cover made by magnesium alloy Durability composite material 8 pieces in one carton Twin Hammer Type inlet : /4" NC-620 / 620Q NC-6220 3/4" Twin Hammer Type inlet : /4" DRIVE AIR IMPACT WRENCH NC-6236 NC-6236Q 3/4" Twin Hammer Type inlet : /4" DRIVE AIR IMPACT WRENCH 76% Lighter NC-6220 is equipped with 6'' extended anvil 8 pieces in one carton 33% Lighter Ultimate power reach 200 ft-lb under 5seconds. Does the toughest job efficiently with industrial level quality & durability. 8 pieces in one carton 22 www.mighty-seven.com

NC-6266 3/4" Twin Hammer Type inlet : 3/8" 6 pieces in one carton DRIVE AIR IMPACT WRENCH Torque output 500ft-lb reached in 5 seconds. Light weight 2.95kg. The front housing and back head cover made by magnesium alloy. Durability composite material. Special alloy steel impact mechanism to keep longer life time. Composite material MIGHTY POWER MIGHTY LIGHT NC-627 NC-623 DRIVE AIR DRIVE AIR 3/4" IMPACT WRENCH 3/4" IMPACT WRENCH Twin Hammer Type Twin Hammer Type inlet : 3/8" inlet : 3/8" 4 pieces in one carton Composite material Alloy steel forward/reverse switch torque output 400ft-lb reached in 5 seconds Special Alloy Steel impact mechanism to keep longer life time. 5 pieces in one carton Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NC-63 3/4" "(25) 50-600(203-84) 850 53 4500 7.0(98) 90(6.3) 0"(252) 0. 4.60 /2" 94.3 7.2 NC-623 3/4" "(25) 50-600(203-84) 850 53 4500 7.0(98) 90(6.3) 4-3/6" (360).6 5.30 /2" 94.3 7.2 NC-627 3/4" -/4"(30) 200-300(27-762) 400 898 4800 5.4(53) 90(6.3) 8-5/32" (25).0 5.00 /2" 92.0 6. NC-623 3/4" -/6"(27) 200-000(27-356) 200 627 6000 6.9(95) 90(6.3) 9-7/6" (239) 8.5 3.88 /2" 92.0 5.0 NC-620 3/4" 3/4"(9) 80-600(244-80) 750 07 7500 4.5(27) 90(6.3) 6-45/64" (70) 5.6 2.55 3/8" 87.0 4.5 NC-620Q 3/4" 3/4"(9) 80-600(244-80) 750 07 6500 4.5(27) 90(6.3) 6-45/64" (70) 5.6 2.55 3/8" 85.0 4.5 NC-6220 3/4" 3/4"(9) 80-600(244-80) 750 07 6500 4.5(27) 90(6.3) 2-23/32" (323) 6.7 3.08 3/8" 85.0 4.5 NC-6255Q 3/4" "(25) 200-00(27-49) 400 890 8500 4.8(36) 90(6.3) 7-3/6" (98) 4.2.90 3/8" 85.0 4.7 NC-626 3/4" -/6"(27) 200-000(27-356) 200 627 6000 6.0(70) 90(6.3) 9-/4" (235) 9.0 4.0 /2" 9.2 5.0 NC-6226 3/4" -/6"(27) 200-000(27-356) 200 627 6000 6.0(70) 90(6.3) 3-3/4" (350) 9.9 4.50 /2" 9.2 5.0 NC-6236 3/4" "(25) 200-900(27-220) 200 627 7500 5.5(55) 90(6.3) 6-45/64'' (7) 5.9 2.68 3/8" 87.0 4.5 NC-6236Q 3/4" "(25) 200-900(27-220) 200 627 7500 5.5(55) 90(6.3) 6-45/64'' (7) 5.9 2.68 3/8" 83.0 4.5 NC-6266 3/4" "(25) 200-300(27-760) 500 2034 6000 5.9(69) 90(6.3) 8-/6'' (205) 6.5 2.95 3/8" 88.0 5.9 www.mighty-seven.com 23

AIR IMPACT WRENCH AIR IMPACT WRENCH NC-63 / 623 3/4" DRIVE AIR IMPACT WRENCH Pin Clutch Type inlet : /4" NC-623 is equipped with 6'' extended anvil Common applications include maintenance of buses, trucks, farm machinery and construction equipment. NC-626 / 6226 3/4" DRIVE AIR New Twin Hammer Type IMPACT WRENCH inlet : 3/8" NC-6226 is equipped with 6'' extended anvil Composite material NC-626PVC Protective boot 0% Lighter 4 pieces in one carton 4 pieces in one carton NC-625 NC-6225 3/4" DRIVE AIR IMPACT WRENCH New Twin Hammer Type inlet : /4" NC-628 3/4" Twin Hammer Type inlet : /2" DRIVE AIR IMPACT WRENCH Light weight.8kg Balanced weighted body that offers comfort feeling NC-6225 is equipped with 6'' extended anvil 4 pieces in one carton 0 pieces in one carton 24 www.mighty-seven.com

NC-822 " DRIVE AIR IMPACT WRENCH New Twin Hammer Type inlet : 3/8" NC-827 " DRIVE AIR IMPACT WRENCH Twin Hammer Type inlet : 3/8" 4 pieces in one carton 4 pieces in one carton NC-829 " DRIVE AIR IMPACT WRENCH New Twin Hammer Type inlet : /2" NC-8237 NC-8247 " DRIVE AIR IMPACT WRENCH Twin Hammer Type inlet : 3/8" NC-8247 is equipped with 6'' extended anvil 2 pieces in one carton 4 pieces in one carton Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NC-625 3/4" "(25) 80-600(244-80) 900 220 6500 7.0(98) 90(6.3) 9-7/32" (234) 0.0 4.50 /2" 9.5 0.8 NC-6225 3/4" "(25) 80-600(244-80) 900 220 6500 7.0(98) 90(6.3) 3-3/4" (350) 0.8 4.90 /2" 9.5 0.8 NC-628 3/4" -/6"(27) 200-400(27-898) 500 2034 6000 6.3(82) 90(6.3) 2-9/6"(320) 2.5 5.70 /2" 06.0 3.3 NC-6266 3/4'' ''(25) 200-300(27-760) 500 2034 6000 5.9(69) 90(6.3) 8-/6"(205) 2.5 5.70 /2" 06.0 3.3 NC-822 " -/6"(27) 200-000(27-356) 300 762 6000 6.0(70) 90(6.3) 9-/4"(235) 6.5 2.95 3/8" 88.0 5.9 NC-827 " -/4"(30) 200-300(27-762) 500 2034 4800 5.4(53) 90(6.3) 8-3/4"(222).0 5.00 /2" 92.0 6. NC-829 " -7/6"(36) 200-600(27-270) 800 244 4000.0(3) 90(6.3) 2-3/32"(35) 2.6 9.84 /2" 03.4 6.7 NC-8237 " -3/8"(33) 200-500(27-2034) 800 244 4500 5.4(53) 90(6.3) 8-3/4"(222) 2.8 5.70 /2" 92.0 6. NC-8247 " -3/8"(33) 200-500(27-2034) 800 244 4500 5.4(53) 90(6.3) 5-9/6"(395) 4.3 6.50 /2" 92.0 6. www.mighty-seven.com 25

AIR IMPACT WRENCH AIR IMPACT WRENCH NC-8343 NC-8343-8 DRIVE AIR Pin Less Type " IMPACT WRENCH inlet : /2" NC-8343-8 is equipped with 8'' extended anvil M7 UNIQUE SHARK SHAPE DESIGN ON BOTH SIDES NEW DESIGNED UP EXHUAST LOW VIBRATION OFFERS A SMOOTH OPERATION POWERFUL & DURABLE pieces in one carton NC-82 NC-822 " DRIVE AIR Twin Hammer Type IMPACT WRENCH inlet : /2" NC-822 is equipped with 6'' extended anvil pieces in one carton NC-8232 " DRIVE AIR New Twin Hammer Type IMPACT WRENCH inlet : /2" pieces in one carton NC-83 NC-835 DRIVE AIR Pin Less Type " IMPACT WRENCH inlet : /2" NC-835 is equipped with 6'' extended anvil 2 pieces in one carton 26 www.mighty-seven.com

NC-826 NC-8226 " DRIVE AIR IMPACT WRENCH Twin Hammer Type inlet : /2" NC-8226 is equipped with 6'' extended anvil 48% Lighter 2 pieces in one carton NC-834 DRIVE AIR Pin Less Type " IMPACT WRENCH inlet : /2" NC-834 is equipped with 6'' extended anvil pieces in one carton Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NC-826 " -3/8"(33) 200-600(27-270) 800 244 6000 9.0(254) 90(6.3) 3-/2"(343) 5.5 7.00 /2" 02.0 9.3 NC-8226 " -3/8"(33) 200-600(27-270) 800 244 6000 9.0(254) 90(6.3) 9-3/6"(487) 8.4 8.40 /2" 02.0 9.3 NC-82 " -3/8"(33) 200-600(27-270) 800 244 5000 0.0(284) 90(6.3) 4-8/5"(370) 22.2 0.0 /2" 00.0 0.0 NC-822 " -3/8"(33) 200-600(27-270) 800 244 5000 0.0(284) 90(6.3) 20-7/8"(530) 25.2.50 /2" 00.0 0.0 NC-8232 " -7/6"(36) 200-600(27-270) 800 244 4000.0(3) 90(6.3) 20-3/32"(58) 24.8.30 /2" 02.0.5 NC-8343 " -3/8"(33) 200-600(27-270) 800 244 3900.5(325) 90(6.3) 5"(38) 27.7 2.56 /2" 03.0 6.3 NC-8343-8 " -3/8"(33) 200-600(27-270) 800 244 3900.5(325) 90(6.3) 23"(590) 30.6 3.9 /2" 03.0 6.3 NC-83 " -3/8" (33) 200-600(27-270) 800 244 4000.5(325) 90(6.3) 5" (380) 24.0 0.90 /2" 0.0 7.3 NC-835 " -3/8" (33) 200-600(27-270) 800 244 4000.5(325) 90(6.3) 20" (50) 27.6 2.50 /2" 0.0 7.3 NC-834 " -3/8" (33) 200-600(27-270) 800 244 4000.5(325) 90(6.3) 20" (50) 27.6 2.50 /2" 97.0 6.3 www.mighty-seven.com 27

AIR IMPACT WRENCH AIR IMPACT WRENCH NC-8382 NC-8382-8 " DRIVE AIR Pin Less Type IMPACT WRENCH inlet : /2" NC-8382-8 is equipped with 8'' extended anvil 38% 40% more Powerful Lighter Max. torque 2500 ft-lb (reverse in 5 seconds). Weight 30% less comparing with equal torque output models to reduce physical loading 30%. Torque output 38% higher comparing with equal weight models. Two-stage trigger for easier operation. 2 piece in one carton NC-8382 piece in one carton NC-8382-8 NC-8242 NC-8242-8 " DRIVE AIR Twin Hammer Type IMPACT WRENCH inlet : /2" NC-8242-8 is equipped with 8'' extended anvil pieces in one carton NC-8252 NC-8262 " DRIVE AIR Twin Hammer Type IMPACT WRENCH inlet : /2" NC-8262 is equipped with 6'' extended anvil 2 pieces in one carton 28 www.mighty-seven.com

NC-8322 NC-8342 " DRIVE AIR Pin Less Type IMPACT WRENCH inlet : /2" NC-8342 is equipped with 8'' extended anvil pieces in one carton NC-8362 NC-8372 " DRIVE AIR Pin Less Type IMPACT WRENCH inlet : /2" NC-8372 is equipped with 6'' extended anvil pieces in one carton NC-9223 NC-9243 -/2" DRIVE AIR IMPACT WRENCH NC-9243 is equipped with 8'' extended anvil 2 pieces in one carton New Twin Hammer Type inlet : /2" Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NC-8382 " -3/8"(33) 200-2000(27-270) 2500 3390 5000 5.9(450) 90(6.3) 4-7/32"(370) 22.0.00 /2" 00.0 6.4 NC-8382-8 " -3/8"(33) 200-2000(27-270) 2500 3390 5000 5.9(450) 90(6.3) 22-5/32"(570) 27.5 2.50 /2" 00.0 6.4 NC-8242 " -9/6"(40) 200-2000(27-270) 2500 3390 5000 5.9(450) 90(6.3) 4-7/32"(370) 23. 0.50 /2'' 00.0 6.4 NC-8242-8 " -9/6"(40) 200-2000(27-270) 2500 3390 5000 5.9(450) 90(6.3) 22-5/32"(570) 26.2.90 /2'' 00.0 6.4 NC-8252 " -7/6"(36) 200-2000(27-270) 2400 3250 4000 0.0(284) 90(6.3) 5-3/8"(390) 26.6 2.0 /2" 00.0 0.0 NC-8262 " -7/6"(36) 200-2000(27-270) 2400 3250 4000 0.0(284) 90(6.3) 22"(560) 29.7 3.50 /2" 00.0 0.0 NC-8322 " -7/6" (36) 200-2000(27-270) 2500 3390 3300.0(3) 90(6.3) 7-5/6" (440) 34.2 5.50 /2" 93.9 8.8 NC-8342 " -7/6" (36) 200-2000(27-270) 2500 3390 3300.0(3) 90(6.3) 24-3/8" (69) 38.0 7.30 /2" 93.9 8.8 NC-8362 " -7/6" (36) 200-2000(27-270) 2500 3390 3700.0(284) 90(6.3) 7-7/8" (455) 35.2 6.00 /2" 93.9 8.8 NC-8372 " -7/6" (36) 200-2000(27-270) 2500 3390 3700.0(284) 90(6.3) 24-7/32" (65) 38.7 7.60 /2" 93.9 8.8 NC-9223 -/2" 2"(50) 200-3000(27-4065) 3500 4746 3000 6.0(453) 90(6.3) 7-3/4" (450) 43.2 9.70 3/4" 04.5 8.8 NC-9243 -/2" 2"(50) 200-3000(27-4065) 3500 4746 3000 6.0(453) 90(6.3) 24-/4" (66) 50.2 22.8 3/4" 04.5 8.8 www.mighty-seven.com 29

AIR IMPACT WRENCH AIR IMPACT WRENCH NC-4232Q /2" DRIVE AIR IMPACT WRENCH KIT PCS pc - /2'' Impact Wrench 7pcs - Impact sockets, MA4M3,7,9,2,22,24,27 pc - 5"Extension bar pc - Mini Lubricator SW-2 pc - /4'' plug NC-4233Q /2" DRIVE AIR IMPACT WRENCH KIT PCS pc - /2'' Impact Wrench 7pcs - Impact sockets, MA4M3,7,9,2,22,24,27 pc - 5" Extension bar pc - Mini Lubricator SW-2 pc - /4'' plug NC-4255Q /2" DRIVE AIR IMPACT WRENCH KIT PCS pc - /2'' Impact Wrench 7pcs - Impact sockets, MA4M3,7,9,2,22,24,27 pc - 5"Extension bar pc - Mini Lubricator SW-2 pc - /4'' plug 30 www.mighty-seven.com

NC-4650 /2" DRIVE AIR IMPACT WRENCH KIT PCS pc - /2'' Impact Wrench 7pcs - Impact sockets, MA4M3,7,9,2,22,24,27 pc - 5"Extension bar pc - Mini Lubricator SW-2 pc - /4'' plug NC-6236Q 3/4" DRIVE AIR IMPACT WRENCH KIT PCS pc - 3/4'' Impact Wrench 7pcs - Impact sockets, MA6M24,27,30,32,33,34,36 pc - 7"Extension bar pc - Mini Lubricator SW-2 pc - /4'' plug NC-6255Q 3/4" DRIVE AIR IMPACT WRENCH KIT PCS pc - 3/4'' Impact Wrench 7pcs - Impact sockets, MA6M24,27,30,32,33,34,36 pc - 7" Extension bar pc - Mini Lubricator SW-2 pc - /4'' plug www.mighty-seven.com 3

AIR IMPACT WRENCH AIR IMPACT WRENCH NC-040 /2" DRIVE AIR IMPACT WRENCH SET 0 PCS pc - Impact Wrench 5pcs - Impact sockets, 6 points, standard length, 3 mm, deep version 7, 9, 2mm pc - Extension bar 3" pc - Mini Oiler /4" female x /4" male pc - /4" plug pc - Oil box NC-040MO NC-422 NC-040M2 NC-427 NC-040M3 NC-4258 NC-045 /2" DRIVE AIR IMPACT WRENCH SET 5 PCS pc-/2" Impact Wrench 0pcs-Impact sockets, 6 points, standard length 9, 0,, 3, 4, 7, 9, 22, 24, 27mm pc-extension bar 5" pc-allen Key : 4mm pc-mini Oiler /4" female x /4" male pc-/4" plug 5 pieces in one carton NC-0425M0 NC-422 NC-0425M2 NC-426 NC-0425M4 NC-4230 NC-045M4 NC-423 NC-045M6 NC427 NC-045M9 NC-4256 32 www.mighty-seven.com

NC-065 SET DRIVE AIR 3/4" IMPACT WRENCH 5 PCS pc-3/4" Impact Wrench 8pcs-Impact sockets, 6 points, standard length 26, 27, 29, 30, 32, 35, 36, 38mm pc-extension bar 7" pc-universal Joint 2pcs-Allen Key : 4mm, 5mm pc-mini Oiler /4"-63,625, 3/8"-626 pc-/4" plug - 63.625, 3/8" plug - 626 pc-o-ring&pin 2 pieces in one carton NC-065M0 NC-63 NC-065M NC-626 NC-065M2 NC-625 ZT-3- ZT-3-2 Torque Test Machine Forward Reverse Torque testing for maintaining pneumatic impact wrenches Applicable Range: 50ft-lb~2000ft-lb(70Nm~2700Nm) Max. Torque: 3500 ft-lb(5000nm) Applicable Size:SQ.DR-/2 ~3/4 Measuring Direction:ZT-3-Forward/ZT-3-2Reverse Screw Size:M32 Length x Width:35cm*30cm Weight:49KG 24cm 35 ZT-3-3 Digital Torque Tester ( Electric Type ) For testing and maintaining pneumatic impact wrenches Applicable Range:90ft-lb~800ft-lb(25Nm~2500Nm) Square Drive:SQ.DR-/2 ~ 3/4 Applicable Voltage:0V~220V Measuring Direction:Forward/Reverse Length x Width:55cm*23cm Weight:32KG 25cm 30cm 24cm 20cm 23cm 23cm www.mighty-seven.com 33

AIR RATCHET WRENCH AIR RATCHET WRENCH 34 www.mighty-seven.com

NE-488 DRIVE AIR /2" RATCHET WRENCH inlet : /4" 2 pieces in one carton 30 30 Swivel Head. (up and down 30 degrees). Body TPR soft package shot feel good to reduce the sense of vibration. Exhaust hood 360 degree adjustable design. Square Drive Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level Inch FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² NE-488 /2" 0-40(3.5-54) 60 8 50 4.5(27.4) 90(6.3) 0-3/6"(275) 3.2.45 3/8" 85.0 3.9 www.mighty-seven.com 35

AIR RATCHET WRENCH AIR RATCHET WRENCH no. 20% Sales Longer Life-time Compare With ordinary models NE-332/432 DRIVE AIR 3/8" & /2'' RATCHET WRENCH inlet : /4" Quick release button enables fast and efficient socket change. Allows fast positioning on nut. Hardened gears, needle and ball bearings provide longer lifetime. Ultimate Torque: 60ft-lbs. 20 pieces in one carton NE-25 NE-35 NE-352 /4" & 3/8'' 3/8'' DRIVE AIR RATCHET WRENCH inlet : /4" DRIVE 2 in AIR RATCHET WRENCH inlet : /4" NE-25R NE-35R 20 pieces in one carton Rubber Handle NE-362 3/8'' DRIVE 2 in AIR RATCHET WRENCH inlet : /4" NE-26 NE-36 /4" & 3/8'' DRIVE AIR RATCHET WRENCH inlet : /4" back exhaust design to reduce flying dusts NE-36 with 3/8 square drive NE-362 with dual-use square drive 60mm long suitable for narrow space NE-0357 3/8'' DRIVE AIR RATCHET WRENCH inlet : /4" 57PCS pc Ratchet Wrench (NE-352) 7pcs /4" Dr. socket : 4,5,6,7,8,9,0 mm 6pcs 3/8" Dr. socket :,2,3,4,5,7 mm 40pcs /4" Bits pc 3/8'' Extension Bar pc /4'' Hex Size shank driver pc Plug 0 pieces in one carton 36 www.mighty-seven.com

NE-32 NE-42 20 pieces in one carton NE-343 NE-443 3/8'' & /2" 3/8'' & /2" DRIVE AIR DRIVE AIR RATCHET WRENCH RATCHET WRENCH inlet : /4" inlet : /4" NE-043 [SET] NE-043S [SET] /2" inlet : /4" Drive Ratchet Wrench 6 pieces in one carton Thru-Hole 3pcs pc Ratchet Wrench(NE-46) 8pcs 3/4" Hex Thru-hole socket : 8,9,0,2,3,4,7,9 mm (NE-043) 8pcs 3/4" Hex Thru-hole socket : 5/6",3/8",7/6",/2",9/6",5/8",/6",3/4" (NE-043S) pc 3'' Extension Bar 2pcs /2'' 3/8'' Adapter pc Plug Square Drive Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NE-25 /4" 5-5(6.7-20) 22 30 350 3.0(84.96) 90(6.3) 5"(25). 0.50 3/8" 89.0 4.4 NE-35 3/8" 5-5(6.7-20) 22 30 350 3.0(84.96) 90(6.3) 5"(25). 0.50 3/8" 89.0 4.4 NE-352 3/8" 5-5(6.7-20) 22 30 350 3.0(84.96) 90(6.3) 5"(25). 0.50 3/8" 89.0 4.4 NE-26 /4" 0-35(3.5-47) 37 50 230 4.6(30) 90(6.3) 6-5/6"(60). 0.50 3/8" 88.0 3.0 NE-36 3/8" 0-35(3.5-47) 37 50 230 4.6(30) 90(6.3) 6-5/6"(60). 0.50 3/8" 88.0 3.0 NE-362 3/8" 0-35(3.5-47) 37 50 230 4.6(30) 90(6.3) 6-5/6"(60). 0.50 3/8" 88.0 3.0 NE-32 3/8" 0-35(3.5-47) 50 68 60 4.0(3.28) 90(6.3) 0-3/8"(265) 2.3.04 3/8" 9.0 3.9 NE-42 /2" 0-35(3.5-47) 50 68 60 4.0(3.28) 90(6.3) 0-3/8"(265) 2.3.04 3/8" 92.8 4.6 NE-343 3/8" 0-55(3.5-74) 75 0.7 60 4.0(3) 90(6.3) "(280) 2.8.30 3/8" 84.0 4.4 NE-443 /2" 0-55(3.5-74) 00 35.6 60 4.0(3) 90(6.3) "(280) 2.8.30 3/8" 84.0 4.4 NE-46 /2" 0-65(3.5-88) 00 35 80 4.0(3) 90(6.3) 0-3/8"(270) 2.6.20 3/8" 83.0 2.3 NE-332 3/8" 0-45(3.5-6) 60 8 60 4.0(3.28) 90(6.3) 0-3/8"(265) 2.6.22 3/8" 90.5 4.4 NE-432 /2" 0-45(3.5-6) 60 8 60 4.0(3.28) 90(6.3) 0-3/8"(265) 2.6.22 3/8" 89.8 5.2 www.mighty-seven.com 37

AIR DIE GRINDER REPAIR KIT Reolacement Parts NC-4233K0 Anvil Ass'y Rubber Grip Hammer Retaining Ring Rotor Blade Washer Gasket Motor Clamp Washer O-Ring Cylinder Dowel Muffler Elemen Rubber Cap NC-3K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen NC-4236K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap NC-320K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen NC-4255K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap NC-360QK0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen NC-4258K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap NC-36QK0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen NC-460QK0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap NC-420K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen NC-46QK0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap NC-423K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen NC-4650K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap NC-426K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen NC-427K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap NC-6266K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen NC-626K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap 38 www.mighty-seven.com

NC-628K0 NC-6236K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap NC-620K0 NC-6255K0 Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Anvil Ass'y Hammer Rotor Blade Gasket O-Ring Muffler Elemen Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap Rubber Grip Retaining Ring Washer Motor Clamp Washer Cylinder Dowel Rubber Cap NE-399/499K0 NE-25K0 Anvil Ass'y Hammer Ratchet Planet Gear Anvil Ass'y Ass'y Rotor Blade Gasket O-Ring Anvil Ass'y Hammer Ratchet Planet Gear Anvil Ass'y Ass'y Rotor Blade Gasket O-Ring Work Spindle Needle Bearing Ball Bearing Muffler Washer Planet Pin Work Spindle Needle Bearing Ball Bearing Muffler Washer Planet Pin NE-352K0 NE-32K0 Anvil Ass'y Hammer Ratchet Planet Gear Anvil Ass'y Ass'y Rotor Blade Gasket O-Ring Anvil Ass'y Hammer Ratchet Planet Gear Anvil Ass'y Ass'y Rotor Blade Gasket O-Ring Work Spindle Needle Bearing Ball Bearing Muffler Washer Planet Pin Work Spindle Needle Bearing Ball Bearing Muffler Washer Planet Pin NE-35K0 NE-332/432K0 Anvil Ass'y Hammer Ratchet Planet Gear Anvil Ass'y Ass'y Rotor Blade Gasket O-Ring Anvil Ass'y Hammer Ratchet Planet Gear Anvil Ass'y Ass'y Rotor Blade Gasket O-Ring Work Spindle Needle Bearing Ball Bearing Muffler Washer Planet Pin Work Spindle Needle Bearing Ball Bearing Muffler Washer Planet Pin NE-42K0 NE-443K0 Anvil Ass'y Hammer Ratchet Planet Gear Anvil Ass'y Ass'y Rotor Blade Gasket O-Ring Anvil Ass'y Hammer Ratchet Planet Gear Anvil Ass'y Ass'y Rotor Blade Gasket O-Ring Work Spindle Needle Bearing Ball Bearing Muffler Washer Planet Pin Work Spindle Needle Bearing Ball Bearing Muffler Washer Planet Pin NE-46K0 NE-483K0 Anvil Ass'y Hammer Ratchet Planet Gear Anvil Ass'y Ass'y Rotor Blade Gasket O-Ring Anvil Ass'y Hammer Ratchet Planet Gear Anvil Ass'y Ass'y Rotor Blade Gasket O-Ring Work Spindle Needle Bearing Ball Bearing Muffler Washer Planet Pin Work Spindle Needle Bearing Ball Bearing Muffler Washer Planet Pin www.mighty-seven.com 39

AIR DIE GRINDER AIR DIE GRINDER 40 www.mighty-seven.com

QA-633Q A/B 97º inlet : /4" 64% 50% Lower sound longer Life-time Compare With ordinary models 20 pieces in one carton AIR Angle Die Grinder No gear type to reduce maintenance costs 97 degree angle to reduce wrist fatigue Low sound pressure 75dBA Composite grip / long time usage without cold feeling Enlarged motor design for bigger power output Collet Size Collet Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound A mm B inch R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² hp Vibration Level QA-633Q 6 & 3 /4" & /8" 5000 7.2(490) 90(6.3) 7-/8"(80) 0.6.54 0.70 3/8" 75.0 >2.5 www.mighty-seven.com 4

AIR DIE GRINDER AIR DIE GRINDER QA-70A/B EXTENDED AIR DIE GRINDER inlet : /4" Length can be adjusted. 240mm Grinder can be used in a wide range of grinding and polishing applications. Easy operation at the corner or deep place. 465mm QA-3 A / B QA-43 A / B AIR DIE GRINDER inlet : /4" Roll Type Throttle AIR DIE GRINDER inlet : /4" Roll Type Throttle 0 pieces in one carton 0 pieces in one carton QA-4 A / B QA-4L A / B AIR DIE GRINDER inlet : /4" QA-4-Roll Type Throttle QA-4L-Lever Type Throttle 0 pieces in one carton 6mm clip collet / overall type Iron steel overall housing / high strength Front exhaust design 80% 70% Longer Life-time More Powerful QA-5 A / B AIR DIE GRINDER inlet : /4" Roll Type Throttle QA-63 A / B QA-63L A / B AIR DIE GRINDER inlet : /4" QA-63-Roll Type Throttle QA-63L-Lever Type Throttle 0 pieces in one carton 0 pieces in one carton 42 www.mighty-seven.com

QA-632Q A / B 97ºAIR ANGLE DIE GRINDER inlet : /4" No gear type to reduce maintenance costs 97 degree angle to reduce wrist fatigue Low sound pressure 75dAB Composite grip / long time usage without cold feeling 20 pieces in one carton QA-6 A / B 97ºAIR ANGLE DIE GRINDER inlet : /4" 90 working angle provides wide flexibility in confined areas. Both 3mm and 6mm or /8 and /4 collets are included. 20 pieces in one carton Collet Size Collet Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound A mm B inch R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² hp Vibration Level QA-3 3 /4" 30000 4.0(396) 90(6.3) 6-/6"(70) 0.4.3 0.60 3/8" 75.0 2.5 QA-4 6 /4" 24000 4.0(396) 90(6.3) 6-/6"(70) 0.4.3 0.60 3/8" 75.0 2.5 QA-4L 6 /4" 24000 4.0(396) 90(6.3) 6-/6"(70) 0.4.3 0.60 3/8" 75.0 2.5 QA-43 6 /4" 24000 4.0(396) 90(6.3) -/6"(296) 0.4 2.0 0.90 3/8" 75.0 2.5 QA-5 6 /4" 8000 2.2(345) 90(6.3) 7"(77) 0.9.76 0.80 3/8" 75.0 2. QA-63 6 /4" 6000 5.0(4) 90(6.3) 2"(305) 0.9 2.7.25 3/8" 75.0 2.8 QA-63L 6 /4" 6000 5.0(4) 90(6.3) 3-25/32"(350) 0.9 2.9.3 3/8" 75.0 2.8 QA-70 6 /4" 8000 5.0(4) 90(6.3) 8-5/6"(465) 0.4 2.36.07 3/8" 80.0.5 QA-6 6 & 3 /4" & /8" 9000 0.0(283) 90(6.3) 6-/8"(60) 0.3.2 0.5 3/8" 74.4.7 QA-632Q 6 & 3 /4" & /8" 22000 2.3(350) 90(6.3) 7"(77) 0.4.2 0.5 3/8" 75.0 >2.5 www.mighty-seven.com 43

AIR DIE GRINDER AIR DIE GRINDER QA-0 A / B AIR DIE GRINDER inlet : /4" Grinder can be used in a wide range of grinding and polishing applications. Easy operation at the corner or deep place. Mighty Mini 9mm QA- A / B AIR DIE GRINDER inlet : /4" QA-23Q A / B AIR DIE GRINDER inlet : /4" QA-20 A / B AIR DIE GRINDER inlet : /4" QA-24 A / B AIR DIE GRINDER inlet : /4" QA-2 A / B AIR DIE GRINDER inlet : /4" QA-3 A / B AIR DIE GRINDER inlet : /4" 44 www.mighty-seven.com

QA-33 A / B AIR DIE GRINDER inlet : /4" QA-35 A / B AIR DIE GRINDER inlet : /4" Collet Size Collet Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound A mm B inch R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² hp Vibration Level QA-0 6 & 3 /4" & /8" 25000 6.3(78) 90(6.3) 4-/6"(9) 0.3 0.7 0.32 3/8" 80.0.4 QA- 6 & 3 /4" & /8" 25000 0.0(283) 90(6.3) 6"(55) 0.3 0.8 0.38 3/8" 8.5.8 QA-20 6 /4" 20000 0.0(283) 90(6.3) 7-/2"(90) 0.9.4 0.65 3/8" 75.7 0.8 QA-2 6 & 3 /4" & /8" 20000 0.0(283) 90(6.3) 7-/2"(90) 0.9.4 0.65 3/8" 75.7 0.8 QA-23Q 6 & 3 /4" & /8" 20000 4.8(420) 90(6.3) 5-29/32"(50) 0.45 0.8 0.35 3/8" 80.0 >2.5 QA-24 6 /4" 4000 0.6(283) 90(6.3) 8-5/8"(220) 0.5.6 0.75 3/8" 75.0 0.87 QA-3 6 & 3 /4" & /8" 25000 0.0(283) 90(6.3) 7-/2"(90) 0.3.0 0.48 3/8" 8.5.8 QA-33 6 & 3 /4" & /8" 25000 0.0(283) 90(6.3) 9-/4"(235) 0.3.2 0.58 3/8" 8.5.8 QA-35 6 & 3 /4" & /8" 25000 0.0(283) 90(6.3) "(280) 0.3.4 0.63 3/8" 8.5.8 www.mighty-seven.com 45

AIR DIE GRINDER AIR DIE GRINDER QA-05 A / B QA-025 A / B Die Grinder 5 kit inlet : /4" pc Die Grinder pc Collet (3 mm or /8") 2pcs Spanner Wrench 5pcs Grinder Stone (3 mm or /8") 5pcs Shank Stone (6 mm or /4") pc Plug (adapter) QA-065 A / B Die Grinder 5 kit inlet : /4" pc Die Grinder (QA-6) pc Collet (3 mm or /8") 2pcs Spanner Wrench 5pcs Grinder Stone (3 mm or /8") 5pcs Shank Stone (6 mm or /4") pc Plug (adapter) QA-0207 Die Grinder 7 kit inlet : /4" pc Die Grinder (QA-20) 5pcs Shank stone pc Plug (adapter) 0 pieces in one carton 46 www.mighty-seven.com

QA-4507 A:6mm B:/4'' MICRO AIR DIE GRINDER inlet : /4" QA-42 A:3mm B:/8'' MICRO AIR DIE GRINDER inlet : /4" QA-42 A:3mm B:/8'' MICRO AIR DIE GRINDER inlet : /4" QA-43 QA-432 A:3mm B:/8'' A:3mm B:/8'' MICRO AIR DIE GRINDER MICRO AIR DIE GRINDER inlet : /4" inlet : /4" QA-5 ENGRAVING PEN inlet : /4" QA-44 Heavy Duty MICRO AIR DIE GRINDER A:3mm B:/8'' inlet : /4" Heavy Duty 3mm Pencil Grinder Rust-free stainless steel front housing Ideal for machining dies, molds or other restricted grinding applications Collet Size Free Speed Blow Per Minute Avg. Consumption Overall Length Hose Length Net Weight Hose Sound inch(mm) R.P.M bpm CFM (L/min) PSI (bar) Inch (mm) mm LBS(kg) Inch dba m/s² bpm Vibration Level QA-42 /8" (3) 60000 ----- 2.7(76) 90(6.3) 6-3/4"(70) 500 0.50 0.24 3/8" 70.0 0.5 QA-42 /8" (3) 60000 ----- 2.7(76) 90(6.3) 6"(50) 500 0.50 0.22 3/8" 70.0 0.5 QA-43 /8" (3) 56000 ----- 2.0(56) 90(6.3) 5-3/8"(37) 425 0.40 0.20 3/8" 70.0 0.5 QA-432 /8" (3) 70000 -----.0(29) 90(6.3) 5-3/8"(37) 425 0.40 0.20 3/8" 70.0 0.5 QA-5 ----- ----- 3000.0(29) 90(6.3) 5-/2"(40) 420 0.50 0.23 3/8" 78.0 0.6 QA-44 /8"(3) 60000 -------- 2.0(56) 90(6.3) 5-5/6"(35) 500 0.40 0.2 3/8" 7.0.0 QA-4507 /4"(6) 32000 -------- 4.0(3) 90(6.3) 4-/32"(364) 500 0.88 0.40 3/8" 85.0.2 www.mighty-seven.com 47

AIR ANGLE GRINDER AIR ANGLE GRINDER 48 www.mighty-seven.com

QB-74 S/M QB-75 S/M QB-745 S/M 00º Angle Grinder / Lever Type Throttle Note : The grinding wheel is not supplied along with the tool inlet : /4" Compare With ordinary models 20% More Powerful 6 pieces in one carton Strengthened motor design can reach.3hp. Metric and inch spindle design can meet accessory demands in every market. Spindle lock enables easier accessory changes. 00 degree design enables easier operation. Heavy duty air cooled spiral gears and double bearings for durability. Push Lock Swivel Exhaust Pad Dia Spindle Free Avg. Overall Motor Net Sound Vibration Size Speed Consumption Length Weight Hose Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² hp QB-74(S/M) 4"(00) 3/8"-24 / M0*P.5 000 4.2(9) 90(6.3) 9-/8"(232).30 4.0.8 3/8" 90.0.2 QB-75(S/M) 5"(25) 5/8"- / M4*P2.0 000 4.2(9) 90(6.3) 9-/8"(232).30 4.0.8 3/8" 90.0.2 QB-745(S/M) 4-/2"(4) 5/8"- / M4*P2.0 000 4.2(9) 90(6.3) 9-/8"(232).30 4.0.8 3/8" 90.0.2 www.mighty-seven.com 49

AIR ANGLE GRINDER AIR ANGLE GRINDER QB-04/05 AIR ANGLE GRINDER / Roll Type Throttle inlet : /4" Note : The grinding wheel is not supplied along with the tool 0 pieces in one carton QB-4/5 AIR ANGLE GRINDER / Lever Type Throttle inlet : /4" Note : The grinding wheel is not supplied along with the tool 0 pieces in one carton QB-24/25 Angle Grinder/Lever Type Throttle inlet : /4" Note : The grinding wheel is not supplied along with the tool 8 pieces in one carton QB-34/35 QB-54/55 Angle Grinder / Lever Type Throttle inlet : /4" Note : The grinding wheel is not supplied along with the tool 0 pieces in one carton QB-44/45 QB-64/65 Angle Grinder / Roll Type Throttle inlet : /4" Note : The grinding wheel is not supplied along with the tool 0 pieces in one carton QB-07 Angle Grinder / Roll Type Throttle inlet : 3/8" Note : The grinding wheel is not supplied along with the tool 6 pieces in one carton 50 www.mighty-seven.com

QB-7 QB-77 AIR ANGLE GRINDER / Lever Type Throttle AIR ANGLE GRINDER / Lever Type Throttle inlet : 3/8" inlet : 3/8" Note : The grinding wheel is not supplied along with the tool Note : The grinding wheel is not supplied along with the tool 6 pieces in one carton 6 pieces in one carton Pad Dia / Arbor Size Spindle Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² hp QB-04 4"(00x6) 3/8"-24 000 6.0(70) 90(6.3) 8-7/8"(226) 0.78 4.0.8 3/8" 87.8.2 QB-05 5"(25x22) 3/8"-24 000 6.0(70) 90(6.3) 8-7/8"(226) 0.78 4.0.8 3/8" 87..2 QB-4 4"(00x6) 3/8"-24 000 6.0(70) 90(6.3) 9"(230) 0.78 4.0.8 3/8" 87.8.2 QB-5 5"(25x22) 3/8"-24 000 6.0(70) 90(6.3) 9"(230) 0.78 4.0.8 3/8" 87..2 QB-24 4"(00x6) 3/8"-24 000 6.0(70) 90(6.3) 9"(230) 0.80 3.8.73 3/8" 85.7.2 QB-25 5"(25x22) 5/8"- 000 6.0(70) 90(6.3) 9"(230) 0.80 3.9.78 3/8" 87.0.2 QB-34 4"(00x6) M0xP.5 000 6.0(70) 90(6.3) 9"(230) 0.78 4.0.8 3/8" 87.8.2 QB-35 5"(25x22) M4xP2.0 000 6.0(70) 90(6.3) 9"(230) 0.78 4.0.8 3/8" 87..2 QB-44 4"(00x6) M0xP.5 000 6.0(70) 90(6.3) 8-7/8"(226) 0.78 4.0.8 3/8" 87.8.2 QB-45 5"(25x22) M4xP2.0 000 6.0(70) 90(6.3) 8-7/8"(226) 0.78 4.0.8 3/8" 87.8.2 QB-54 4"(00x6) 3/8"-24 000 6.0(70) 90(6.3) 9"(230) 0.78 3.8.73 3/8" 87.8.2 QB-55 5"(25x22) 3/8"-24 000 6.0(70) 90(6.3) 9"(230) 0.78 3.8.73 3/8" 87.8.2 QB-64 4"(00x6) 3/8"-24 000 6.0(70) 90(6.3) 8-7/8"(226) 0.78 4.0.8 3/8" 87.8.2 QB-65 5"(25x22) 3/8"-24 000 6.0(70) 90(6.3) 8-7/8"(226) 0.78 4.0.8 3/8" 87.8.2 QB-07 7"(78x22) ------ 7000 9.0(255) 90(6.3) -/4"(290).0 7. 3.24 /2" 89.7.0 QB-7 7"(78x22) ------ 7000 9.0(255) 90(6.3) 3-/2"(343).0 7. 3.2 /2" 89.7.0 QB-77 7"(78x22) 5/8''- 7600 6.0(70) 90(6.3) -3/6"(300) 2.0 7.2 3.3 3/8" 92.0 2.7 www.mighty-seven.com 5

AIR ANGLE GRINDER AIR ANGLE GRINDER QB-97Q AIR ANGLE GRINDER / Lever Type Throttle inlet : 3/8" Note : The grinding wheel is not supplied along with the tool QB-79 AIR VERTICAL GRINDER / Lever Type Throttle inlet : /2'' Note : The grinding wheel is not supplied along with the tool 6 pieces in one carton 4 pieces in one carton QB-85 AIR VERTICAL GRINDER / Lever Type Throttle inlet : 3/8" Note : The grinding wheel is not supplied along with the tool 4 pieces in one carton QB-87 AIR VERTICAL GRINDER / Lever Type Throttle inlet : 3/8" Note : The grinding wheel is not supplied along with the tool 4 pieces in one carton 52 www.mighty-seven.com

QB-94 AIR ANGLE GRINDER / Roll Type Throttle inlet : 3/8" Note : The grinding wheel is not supplied along with the tool 0 pieces in one carton QB-94L AIR ANGLE GRINDER / Lever Type Throttle inlet : 3/8" Note : The grinding wheel is not supplied along with the tool 6 pieces in one carton QB-94-CN AIR ANGLE GRINDER / Roll Type Throttle inlet : 3/8" Note : The grinding wheel is not supplied along with the tool 0 pieces in one carton QB-95-85 QB-95-20 AIR ANGLE GRINDER / Roll Type Throttle inlet : 3/8" Note : The grinding wheel is not supplied along with the tool 0 pieces in one carton Pad Dia / Arbor Size Spindle Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² hp Vibration Level QB-97Q 7"(78x22) 5/8"- 7000 6.0(70) 90(6.3) 3-5/6"(353) 2.2 6.8 3. 3/8" 77.0.5 QB-79 9"(230x22) 5/8''- 6000 7.0(98) 90(6.3) "(279) 3.8 3.2 6.0 3/4" 86.0 2. QB-85 5"(25x22) 5/8"- 2000 6.0(70) 90(6.3) 9-9/64"(232).4 6.2 2.8 /2" 86.0 2. QB-87 7"(78x22) 5/8''- 7000 6.0(70) 90(6.3) 9-23/32"(247) 2.0 8.8 4.0 /2" 86.0 2. QB-94 4"(00x6) M8 X.25 2000 4.9(38) 90(6.3) 8-5/32"(25) 0.9 4.2.9 3/8" 9.0 2.6 QB-94L 4"(00x6) M8 X.25 2000 4.9(38) 90(6.3) 0-23/32"(272) 0.9 4.6 2. 3/8" 89.0 2.5 QB-94-CN 4"(00x6) M8 X.25 3500 4.8(36) 90(6.3) 8-5/64"(20) 0.8 4.2.9 3/8" 92.0 2.8 QB-95-85 5"(25x22) /2"-3 8500 4.9(38) 90(6.3) 8-5/6"(227).4 5.3 2.4 3/8" 9.0 2. QB-95-20 5"(25x22) /2"-3 2000 5.(44) 90(6.3) 8-5/6"(227).4 5.3 2.4 3/8" 9.0 2. www.mighty-seven.com 53

AIR ANGLE GRINDER AIR ANGLE GRINDER QB-95L-85 QB-95L-20 AIR ANGLE GRINDER / Lever Type Throttle inlet : 3/8'' Note : The grinding wheel is not supplied along with the tool QB-95CN AIR ANGLE GRINDER / Roll Type Throttle inlet : 3/8'' Note : The grinding wheel is not supplied along with the tool 0 pieces in one carton 6 pieces in one carton QB-99 S/M AIR ANGLE GRINDER / Lever Type Throttle inlet : 3/8" Note : The grinding wheel is not supplied along with the tool 6 pieces in one carton QB-004 AIR ANGLE GRINDER / Roll Type Throttle inlet : /4'' Note : The grinding wheel is not supplied along with the tool 54 www.mighty-seven.com

QB-2925 AIR STRAIGHT GRINDER / Roll Type Throttle inlet : 3/8'' Note : The grinding wheel is not supplied along with the tool 2 pieces in one carton QB-2925L AIR STRAIGHT GRINDER / Lever Type Throttle inlet : 3/8'' Note : The grinding wheel is not supplied along with the tool 2 pieces in one carton QB-623 2''AIR ANGLE GRINDER / Lever Type Throttle inlet : /4'' back exhaust design to reduce flying dusts suitable sizes for detailed sanding and trimming 20 pieces in one carton Pad Dia / Arbor Size Spindle Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² hp Vibration Level QB-95L-85 5"(25x22) /2"-3 8500 4.9(38) 90(6.3) 0-3/6"(275).4 5.5 2.5 3/8" 9.0 2. QB-95L-20 5"(25x22) /2"-3 2000 5.(44) 90(6.3) 0-3/6"(275).4 5.5 2.4 3/8" 9.0 2. QB-95-CN 5"(25x22) M8 X.25 2000 4.9(38) 90(6.3) 8-5/32"(25).0 4.4 2.0 3/8" 9.0 2.6 QB-99S/M 9"(230x22) 5/8"- 5900 6.8(78) 90(6.3) 4"(360) 2.5 9.9 4.5 3/8" 98.0 3.75 QB-004 4" (00x6) M8 X.25 3500 4.9(38) 90(6.3) 7-3/32"(25) 0.6 2.6 3/8" 86.0 2.5 QB-2925 (65x3x9.5) 3/8''-6 6000 5.0(4) 90(6.3) 0-/6"(270) 0.9 2.9.33 3/8" 90.0 2.8 QB-2925L (65x3x9.5) 3/8''-6 6000 5.0(4) 90(6.3) 2-25/32"(25) 0.9 3.0.39 3/8" 90.0 2.8 QB-623 2"(50x0) M4X2 9000 8.(283) 90(6.3) 6-5/6"(60) 0.3.2 0.57 3/8" 80.0 0.5 (5/8''-) www.mighty-seven.com 55

AIR ANGLE GRINDER AIR ANGLE GRINDER QB-3 AIR BELT SANDER inlet : /4'' 0mm belt-can be easily changed. Belt automatically adjusts to correct position. Belt shroud protects hands. Rubber handle offers non-slip grip and insulates hands from cold housing. Common applications include sanding and smoothing of welds, paint, rust and deburring removal. QB-32 AIR BELT SANDER inlet : /4'' Common applications include sanding and smoothing of welds, paint, rust and deburring removal in difficult-to-access locations QB-33 AIR BELT SANDER inlet : /4'' QB-32 AIR BELT SANDER inlet : /4'' QB-324 AIR BELT SANDER inlet : /4'' Adjustable belt speed control regulator Common applications include sanding and smoothing of welds, paint, rust and deburring removal in difficult-to-access locations 56 www.mighty-seven.com

QB-322 QB-322C AIR BELT SANDER inlet : /4'' Ergonomic grip with streamline plastic cover adjusting switch for adjusting speed Serial sander can use non-woven material sanding belt No screw type -> 360 degree open shield, easy to change sanding belts QB-322C:Rubber pulley QB-325N[SET] AIR BELT SANDER inlet : /4'' Adjustable belt speed control regulator. Non-woven abravise belt availabe. Ergonomic design for comfortable operation. Belt Size 0x330mm / 3/8"x3" 3x330mm / /8"x3" 6x330mm / /4"x3" 20x330mm / 3/4"x3" 20x520mm / 3/4"x20-/2" Tension Ban QB-325P54 QB-325P53 QB-325P04 QB-325P52 QB-325P5 Belt Size Pad Dia Free Speed Avg. Consumption Overall Length Net Weight Hose Sound inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level QB-3 3/8"x3"(0x330) 6000 8.0(226) 90(6.3) -/2"(290).7 0.80 3/8" 89.7 0.5 QB-32 3/4"x20-/2"(20x520) 6000 9.0(254) 90(6.3) 4"(360) 2.6.20 3/8" 9.8 0.4 QB-33-3/6"x2-/4"(30x540) 3000 0.0(283) 90(6.3) 5-3/8"(390) 5.2 2.40 3/8" 8.0.2 QB-32 3/8"x3"(0x330) 6000 4.0(3) 90(6.3) 2-5/8"(320) 2. 0.95 3/8" 88.0.0 QB-322 3/4''x20-/2''(20x520) 6000 4.0(3) 90(6.3) 7'"(430) 3..40 3/8" 88.0.3 QB-324 /2"x24"(2.7x60) 6000 4.0(3) 90(6.3) 8"(455) 2.4.0 3/8" 88.0. QB-325 3/8"x3" (0X330) /8''x3'' (3X330) /4''x3'' (6X330) 3/4''x3'' (20X330) 3/4''x20-/2'' (20X520) 6000 4.0(3) 90(6.3) 2-5/8"(320) 2. 0.95 3/8" 90.0.0 www.mighty-seven.com 57

AIR SANDER AIR SANDER 58 www.mighty-seven.com

QB-54 6" QB-54602 6" QB-54702 inlet : /4" 0 pieces in one carton (six hole Pad) (fifteen hole Pad) Random Orbital Sander Central-Vacuum Composite body housing, light weight Strengthened composite rotor, durable and longer lifetime Pad Dia Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² mm hp orbit QB-54602 6"(52) 0000 3.0(85) 90(6.3) 8-/4"(20) 0.24.7 0.78 3/8" 8.6.5 5 QB-54702 6"(52) 0000 3.0(85) 90(6.3) 8-/4"(20) 0.24.7 0.78 3/8" 8.6.5 5 www.mighty-seven.com 59

AIR SANDER AIR SANDER QB-52 5'' QB-52502 6'' QB-52602 Random Orbital Sander Non-Vacuum inlet : /4" 0 pieces in one carton QB-55 6'' QB-55602 Random Orbital Sander Non-Vacuum inlet : /4" 0 pieces in one carton QB-46 5'' QB-46502 5'' QB-4652 6'' QB-46602 6'' QB-4662 Random Orbital Sander Non-Vacuum inlet : /4" Excellent for refinishing or smoothing the surface of metal, wood, leather etc. 0 pieces in one carton QB-42 5'' QB-42502 6'' QB-42602 Random Orbital Sander Non-Vacuum inlet : /4" 0 pieces in one carton 6'' QB-49602 Dual Action Sander Random Orbital Sander Non-Vacuum inlet : /4" 0 pieces in one carton 5'' QB-58502 6'' QB-58602 2-Hand Random Orbital Sander Non-Vacuum inlet : /4" 0 pieces in one carton 60 www.mighty-seven.com

5'' QB-58542 6'' QB-58642 2-Hand Random Orbital Sander Non-Vacuum inlet : /4" Gear transmission for quicker hard sanding, saving time and longer lifespan. Aluminum alloy body housing completely covered with composite materials, robust and no cold feeling during long time usage. Long grip can reduce reaction while sanding. adjusting switch for adjusting speed. 0 pieces in one carton Pad Dia Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² mm hp orbit QB-52502 5"(27) 0000 6.0(70) 90(6.3) 6"(53) 0.24 2.2.00 3/8" 87.6.2 5 QB-52602 6"(52) 0000 6.0(70) 90(6.3) 6-/2"(66) 0.24 2.6.20 3/8" 87.6.7 5 QB-55602 6"(52) 0000 3.0(85) 90(6.3) 6-/6"(57) 0.24.5 0.68 3/8" 8.6.5 5 QB-42502 5"(27) 0000 3.85(09) 90(6.3) 6"(53) 0.24.7 0.8 3/8" 75.7.4 5 QB-42602 6"(52) 0000 3.85(09) 90(6.3) 6-/2"(66) 0.24.8 0.85 3/8" 74.4.4 5 QB-49602 6"(52) 0000 3.60(02) 90(6.3) 8-2/32"(220) 0.75 2.0 0.9 3/8" 92.5 3.3 9.5 QB-46502 5"(27) 0000 3.85(09) 90(6.3) 6"(53) 0.24.7 0.79 3/8" 80. 2.2 5 QB-4652 5"(27) 0000 3.85(09) 90(6.3) 6"(53) 0.24.7 0.79 3/8" 80. 2.2 2.5 QB-46602 6"(52) 0000 3.85(09) 90(6.3) 6-/2"(66) 0.24.7 0.79 3/8" 80. 2.2 5 QB-4662 6"(52) 0000 3.85(09) 90(6.3) 6-/2"(66) 0.24.7 0.79 3/8" 80. 2.2 2.5 B-58502 5"(27) 0000 3.0(88) 90(6.3) 9-7/6"(240) 0.4 2.6.2 3/8" 80.0.3 5 QB-58602 6"(52) 0000 3.0(88) 90(6.3) 9-7/6"(240) 0.4 2.6.2 3/8" 80.0.3 5 QB-58542 5"(27) 900 3.0(88) 90(6.3) 9-7/6"(240) 0.4 3.3.5 3/8" 82.0 <2.5 5 QB-58642 6"(52) 900 3.0(88) 90(6.3) 9-7/6"(240) 0.4 3.5.6 3/8" 82.0 <2.5 5 www.mighty-seven.com 6

AIR SANDER AIR SANDER Self-Generated Vacuum QB-56 5'' QB-56602 Random Orbital Sander Self-Generated Vacuum inlet : /4" 0 pieces in one carton QB-53 5'' QB-53802 6'' QB-53902 Random Orbital Sander Self-Generated Vacuum inlet : /4" 0 pieces in one carton QB-47 6'' QB-47602 6'' QB-5762 Random Orbital Sander Self-Generated Vacuum inlet : /4" 0 pieces in one carton Excellent for refinishing or smoothing the surface of metal, wood, leather etc. QB-43 5'' QB-43802 6'' QB-43902 Random Orbital Sander Self-Generated Vacuum inlet : /4" 0 pieces in one carton 62 www.mighty-seven.com

5'' QB-59602 2-Hand Random Orbital Sander Self-Generated Vacuum inlet : /4" 0 pieces in one carton Aluminum alloy body housing completely covered with composite materials, robust and no cold feeling during long time usage. Long grip can reduce reaction while sanding. adjusting switch for adjusting speed. 5'' QB-59642 2-Hand Random Orbital Sander Self-Generated Vacuum inlet : /4" 0 pieces in one carton Pad Dia Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² mm hp orbit QB-53802 5"(27) 0000 6(70) 90(6.3) 6"(53) 0.24 2.2.00 3/8" 86.2. 5 QB-53902 6"(52) 0000 6(70) 90(6.3) 6-/2"(66) 0.24 2.6.20 3/8" 80..6 5 QB-43802 5"(27) 0000 3.85(09) 90(6.3) 8"(206) 0.24 3.2.49 3/8" 83.9.3 5 QB-43902 6"(52) 0000 3.85(09) 90(6.3) 8-3/4"(22) 0.24 3.3.54 3/8" 83.0.4 5 QB-47602 6"(52) 0000 3.85(09) 90(6.3) 7-/2"(93) 0.24 2.4.3 3/8" 84.7 2.2 5 QB-4762 6"(52) 0000 3.85(09) 90(6.3) 7-/2"(93) 0.24 2.4.3 3/8" 84.7 2.2 2.5 QB-56602 6"(52) 0000 3.0(85) 90(6.3) 8-/4"(20) 0.24.7 0.78 3/8" 8.6.5 5 QB-59602 6"(52) 0000 3.0(88) 90(6.3) 9-7/6"(240) 0.4 2.6.2 3/8" 80.0.3 5 QB-59642 6"(52) 900 3.0(88) 90(6.3) 9-7/6"(240) 0.4 3.5.6 3/8" 82.0 <2.5 5 www.mighty-seven.com 63

AIR SANDER AIR SANDER Central-Vacuum QB-45 6'' QB-45602 6'' QB-4562 Random Orbital Sander Central-Vacuum inlet : /4" 0 pieces in one carton Excellent for refinishing or smoothing the surface of metal, wood, leather etc. QB-4 6'' QB-4902 Random Orbital Sander Central-Vacuum inlet : /4" 0 pieces in one carton 6'' QA-57602 2-Hand Random Orbital Sander Central-Vacuum inlet : /4" 0 pieces in one carton 6'' QA-57642 2-Hand Random Orbital Sander Central-Vacuum inlet : /4" 0 pieces in one carton 64 www.mighty-seven.com

QB-4802 3" x 4" Jitterbug Sander Non-Vacuum inlet : /4" 0 pieces in one carton QB-48 4"x4-3/8" Jitterbug Sander Non-Vacuum inlet : /4" 0 pieces in one carton QB-482 4"x4-3/8" Jitterbug Sander Non-Vacuum inlet : /4" 0 pieces in one carton QB-4822 QB-482 3-/2''x7'' Jitterbug Sander 2-/2''x5-3/4'' Jitterbug Sander Non-Vacuum inlet : /4" Non-Vacuum inlet : /4" 0 pieces in one carton 0 pieces in one carton Pad Dia Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² mm hp orbit QB-4902 6"(52) 0000 3.85(09) 90(6.3) 8"(206) 0.24 2.0 0.9 3/8" 8.5.2 5 QB-45602 6"(52) 0000 3.85(09) 90(6.3) 7-/2"(93) 0.24.8 0.84 3/8" 8.6 2.2 5 QB-4562 6"(52) 0000 3.85(09) 90(6.3) 7-/2"(93) 0.24.8 0.84 3/8" 8.6 2.2 2.5 QB-59602 6"(52) 0000 3.0(88) 90(6.3) 9-7/6"(240) 0.4 2.6.2 3/8" 80.0.3 5 QB-59642 6"(52) 900 3.0(88) 90(6.3) 9-7/6"(240) 0.4 3.5.6 3/8" 82.0 <2.5 5 QB-57642 6"(52) 900 3.0(88) 90(6.3) 9-7/6"(240) 0.4 3.5.6 3/8" 82.0 <2.5 5 QB-4802 3''x4''(75x00) 0000 5.0(4) 90(6.3) 5-3/8"(37) 0.24.83 0.83 3/8'' 83.0.5 2.5 QB-48 4"x4-3/8"(00x0) 000 7.0(98) 90(6.3) 5-/5"(30) 0.28 2.0 0.9 3/8" 83.0.5 2.5 QB-482 4"x4-3/8"(00x0) 0000 5.0(4) 90(6.3) 5-3/8"(36) 0.24.7 0.78 3/8" 83.0.5 2.5 QB-482 2-/2"-5-3/4"(64X400) 200 5.0(4) 90(6.3) 7-/2"(444) 0.24 6. 2.8 3/8" QB-4822 7"x3-/2"(93x80) 0000 5.0(4) 90(6.3) 7"(80) 0.24 2.0 0.94 3/8" 83.0.5 2.5 www.mighty-seven.com 65

AIR SANDER AIR PISTOL SANDER QP-3 AIR PISTOL POLISHER inlet : /4" 0 pieces in one carton QP-23 AIR PISTOL SANDER inlet : /4" inlet : /4" QP-25 AIR HIGH SPEED SANDER 0 pieces in one carton 0 pieces in one carton QP-37/327 AIR ANGLE POLISHER inlet : /4" QP-307 AIR ANGLE SANDER QP-327 AIR ANGLE POLISHER inlet : /4" QP-335 VERTICAL POLISHER inlet : /4" 0 pieces in one carton 0 pieces in one carton 0 pieces in one carton Pad Dia Spindle Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² mm hp orbit QP-3 3"(76) 5/6''-24 5000 3.5(99) 90(6.3) 5"(27) 0.40.5 0.72 3/8" 74.0 0.3 2.5 QP-23 3"(76) 7/6''-20 200 3.5(99) 90(6.3) 5-5/6"(35) 0.40.6 0.77 3/8" 74.0 0.3 ---- QP-25 4-2/'' 7/6''-20 6000 6.5(84) 90(6.3) 6-9/64"(60) 0.80 2.6.20 3/8" 60.0.8 ---- QP-37 7"(78) 5/8''- 2500 6.0(69) 90(6.3) 6"(406) 0.40 4.0 2.04 3/8" 84.0 2.5 ---- QP-307 7"(78) M4xP2 4500 6.0(69) 90(6.3) 6"(406) 0.40 4.0 2.04 3/8" 84.0 2.5 ---- QP-327 7"(78) M4xP2 2500 6.0(69) 90(6.3) 6"(406) 0.40 4.0 2.04 3/8" 84.0 2.5 ---- QP-335 5"(27) 5/6''-24 3000 3.65(05) 90(6.3) 8"(203) 0.55.2 0.53 /4'' 85.0 ---- 66 www.mighty-seven.com

www.mighty-seven.com 67

AIR CUTTING TOOLS AIR CUTTING TOOLS QD-32 Low Vibration Body Saw inlet : /4" 0 pieces in one carton 30% 20% Lower Vibration Efficiency Compare With ordinary models Special air flow design to reduce vibration 30% streamline modelling for better ergonomics Long stroke to raise work efficiency 20% Cylinder specially processed to raise lifetime 30% vibration-reduced cylinder design Strokes Length Strokes Per min. Avg. Consumption Overall Length Net Weight Hose Sound mm S.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² S.P.M Vibration Level QD-32 4.5 000 4.5 (3) 90(6.3) 9-/4"(230).7 0.6 3/8" 83.0 2.0 68 www.mighty-seven.com

QC-23 QC-234 3'' HEAVY DUTY AIR CUT-OFF TOOL Note:wheel is supplied with the tool 4'' HEAVY DUTY AIR CUT-OFF TOOL Note:wheel is supplied with the tool Available Dimension of inner hold :Ø 0mm inlet : /4" Available Dimension of inner hold :Ø 0mm inlet : /4" 0.9hp high power motor Excellent for cutting rusted bolts, nuts, motor exhaust 20 pieces in one carton clamps or hangers, sheet metal, fiberglass etc. 20 pieces in one carton 3" wheel 4" wheel Excellent for cutting rusted bolts, nuts, motor exhaust clamps or hangers, sheet metal, fiberglass etc. QC-253 3'' AIR CUT-OFF TOOL Note:wheel is supplied with the tool inlet : /4" 0 pieces in one carton QC-254 4'' AIR Corner CUT-OFF TOOL Note:wheel is supplied with the tool Available Dimension of inner hold :Ø 0mm inlet : /4" 0 pieces in one carton PN-50 PN-80 PN-250 PN-280 AIR PUNCH & FLANGE TOOL AIR PUNCH & FLANGE TOOL inlet : /4" inlet : /4" 0 pieces in one carton 0 pieces in one carton Belt Size Pad Dia Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS kg Inch dba m/s² hp QC-23 3''(75) 20000 0.0(283) 90(6.3) 7-7/8''(200) 0.9.9 0.8 3/8'' 80.2 0.8 QC-234 4''(00) 6000 0.0(283) 90(6.3) 4''(355) 0.9 3.5.5 3/8'' 85.0 5.0 QC-253 3''(75) 24000 4.0(3) 90(6.3) 8''(203) 0.6.7 0.8 3/8'' 9.0.2 QC-254 4''(00) 20000 5.0(4) 90(6.3) 8-/8''(206) 0.6 2.0 0.9 3/8'' 8.0 0.8 Punch Diameter Capacity Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level PN-50 5.6 mm (Steel) 4.0(3) 90(6.3) 0"(254) 2.5.5 3/8" 62.0 0. PN-80 8.2 mm (Steel) 4.0(3) 90(6.3) 0"(254) 2.5.5 3/8" 62.0 0. PN-250 5.6 mm (Steel) 4.0(3) 90(6.3) 7-5/32"(90) 2.6.5 3/8" 62.0 0. PN-280 8.2 mm (Steel) 4.0(3) 90(6.3) 7-5/32"(90) 2.6.5 3/8" 62.0 0. www.mighty-seven.com 69

AIR CUTTING TOOLS AIR CUTTING TOOLS QD-242 AIR FILE WITH HOSE inlet : /4" 0 pieces in one carton QD-22 AIR SAW WITH HOSE inlet : /4" 0 pieces in one carton Ø5.0mm Quick change saw blade holder allows for easy blade changing Adjustable guard / guide controls depth of cut precisely Excellent for cutting sheet aluminum, plastic and sheet metal up to.6mm QD-230 AIR MINI SAW WITH HOSE inlet : /4" 0 pieces in one carton QD-29 AIR SAW SET inlet : /4" 0 pieces in one carton Ø5.0mm Ø5.0mm Quick change saw blade holder allows blade changing easily. 5 pieces file set and 2 saw blades are included. Adjustable guard / guide controls depth of cut precisely. Contents saw tool ( pcs) 24T Saw Blade (6 pcs) 32T Saw Blade (6 pcs) Allen Key:4mm,3mm (pcs) /4" 360 plug 5 Pieces file set Mini oiler /4" ( pcs) Ø5.0mm Strokes Length Strokes Per min. Collef Size Avg. Consumption Overall Length Net Weight Hose Sound mm S.P.M mm CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² S.P.M Vibration Level QD-22 0 5000 4.0 4.0 (3) 90(6.3) 9-3/4"(250).76 0.8 3/8" 8.9 4. QD-230 5 7000 5.0 2.5 (70) 90(6.3) 7"(80).0 0.5 3/8" 80.0 2.4 QD-242 5 7000 5.0 5.3 (50) 90(6.3) 7-9/6"(700).28 0.58 3/8" 80.0 4.5 QD-29 0 9000 5.0 4.0 (3) 90(6.3) 9-/4"(235).30 0.6 3/8" 80.0 2.4 70 www.mighty-seven.com

QK-2 AIR KNIFE inlet : /4" QK- AIR KNIFE inlet : /4" 0 pieces in one carton QK--P5 QK--P52 QK--P53 QK--P54 QK--P50 QB-9320 QG-02 QG-202 AIR SHEAR / Straight Type AIR SHEAR / Pistol Type inlet : /4" inlet : /4" 0 pieces in one carton 0 pieces in one carton QG-03 AIR NIBBLER inlet : /4" 0 pieces in one carton Oscillation Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level per min CFM (L/min) Inch (mm) LBS(kg) Inch dba m/s² QK- 20000 6.0(70) 7-5/64" (80) 2.4(.) 0 75 3.9 QK-2 9000 4.3(2) 6-5/6" (76).3(0.6) 0 9 2.8 Punch Diameter Capacity Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level PN-50 5.6 mm (Steel) 4.0(3) 90(6.3) 0"(254) 2.5.5 3/8" 62.0 0. PN-80 8.2 mm (Steel) 4.0(3) 90(6.3) 0"(254) 2.5.5 3/8" 62.0 0. Strokes Avg. Overall Net Sound Vibration Per min Consumption Length Weight Hose Level Cut Capacity S.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² mm S.P.M steel aluminum QG-02 2600 6.0(70) 90(6.3) 0"(254) 2.2.00 3/8" 85.8 2.4.2.6 QG-202 2600 6.5(84) 90(6.3) 8-/4"(20) 2.4.0 3/8" 89. 2.9.2.6 QG-03 2600 3.0 (85) 90(6.3) 7-3/5"(93) 2.2.00 3/8" 88.0 2.8.2.6 www.mighty-seven.com 7

AIR DRILL AIR DRILL 72 www.mighty-seven.com

QE-83 3/8'' Reversible Drill With Keyless Chuck inlet : /4" 0 pieces in one carton one finger forward/reverse switch. Planet gear to strengthen drilling capability. Chuck Size Free Speed Motor Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch(mm) R.P.M hp CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² hp QE-83 3/8''(0) 800 0.45 4.0(3) 90(6.3) 7-/4"(85) 2.5.0 3/8" 83.0 0.3 www.mighty-seven.com 73

AIR DRILL AIR DRILL QE-33/332 QE-33 3/8'' Reversible Drill QE-332 3/8'' Drill With Keyless Chuck inlet : /4" inlet : /4" QE-333/334 QE-333 3/8'' Reversible Drill QE-334 3/8'' Drill With Key Chuck 0 pieces in one carton 0 pieces in one carton QE-833 3/8'' Reversible Drill With Key Chuck inlet : /4" 0 pieces in one carton 3pcs Planet Gear 3pcs Planet Gear 3pcs Planet Gear QE-43/432 QE-43 3/8'' Reversible Drill QE-432 3/8'' Drill With Keyless Chuck inlet : /4" inlet : /4" QE-433/434 QE-433 3/8'' Reversible Drill QE-434 3/8'' Drill With Key Chuck 0 pieces in one carton 0 pieces in one carton QE-532 3/8'' Drill With Keyless Chuck inlet : /4" 0 pieces in one carton 2pcs Planet Gear 3pcs Planet Gear 2pcs Planet Gear 74 www.mighty-seven.com

QE-533 3/8'' Reversible Drill With Key Chuck inlet : /4" 0 pieces in one carton QE-633 3/8'' 90 Reversible Angle Drill With Keyless Chuck inlet : /4" 0 pieces in one carton 2pcs Planet Gear 3pcs Planet Gear QE-933 3/8'' Reversible Drill With Keyless Chuck inlet : /4" 0 pieces in one carton 2pcs Planet Gear Chuck Size Free Speed Motor Avg. Consumption Overall Length Net Weight Hose Sound inch(mm) R.P.M hp CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level hp QE-33 3/8''(0) 800 0.65 6.5(84) 90(6.3) 8"(203) 2.42. 3/8" 96.5 0.3 QE-332 3/8''(0) 2200 0.60 6.5(84) 90(6.3) 7-/2"(90) 2.20.0 3/8" 96.5 0.3 QE-333 3/8''(0) 800 0.65 6.5(84) 90(6.3) 8"(203) 2.42. 3/8" 92.0 0.2 QE-334 3/8''(0) 2200 0.60 6.5(84) 90(6.3) 7-/2"(90) 2.20.0 3/8" 92.0 0.2 QE-43 3/8''(0) 800 0.50 4.0(2) 90(6.3) 8-29/32"(226) 2.6.8 3/8" 90.0 3.0 QE-432 3/8''(0) 2200 0.70 4.8(35) 90(6.3) 8-29/32"(226) 2.6.8 3/8" 90.0 3.0 QE-433 3/8''(0) 800 0.50 4.0(2) 90(6.3) 9-/6"(230) 2.7.23 3/8" 90.0 3.0 QE-434 3/8''(0) 2200 0.70 4.8(35) 90(6.3) 9-/6"(230) 2.7.23 3/8" 90.0 3.0 QQE-532 3/8''(0) 2800 0.70 4.8(35) 90(6.3) 9-9/6"(243) 2.7.23 3/8" 90.0 2.0 QE-533 3/8''(0) 2200 0.50 4.0(2) 90(6.3) 9-3/32"(89) 2.7.23 3/8" 90.0 2.0 QE-833 3/8''(0) 800 0.45 4.0(3) 90(6.3) 7-/4"(85) 2.5.0 3/8" 83.0 0.3 QE-633 3/8''(0) 600 0.50 3.0(85) 90(6.3) 8-/4"(20) 2.4.0 3/8" 72.0 2.5 QE-933 3/8''(0) 2600 0.50 3.0(85) 90(6.3) 8-5/32"(25) 2.0 0.90 3/8" 72.0 2.5 www.mighty-seven.com 75

AIR DRILL AIR DRILL QE-34/342 QE-34 /2'' Reversible Drill QE-342 /2'' Drill With Keyless Chuck inlet : /4" 0 pieces in one carton QE-343/344 QE-343 /2'' Reversible Drill QE-344 /2'' Drill With Key Chuck inlet : /4" 0 pieces in one carton QE-84 /2'' Reversible Drill With Keyless Chuck inlet : /4" 0 pieces in one carton 3pcs Planet Gearx 2Set 3pcs Planet Gearx 2Set 3pcs Planet Gearx 2Set QE-843 QE-845 /2'' Reversible Drill /2'' Reversible Drill With Key Chuck With Key Chuck inlet : /4" inlet : /4" 0 pieces in one carton 0 pieces in one carton QE-44/442 QE-44 /2'' Reversible Drill QE-442 /2'' Drill With Keyless Chuck inlet : /4" 0 pieces in one carton 3pcs Planet Gearx 2Set 3pcs Planet Gearx 2Set 2pcs Planet Gear x 2Set 76 www.mighty-seven.com

QE-443/444 QE-443 /2'' Reversible Drill QE-444 /2'' Drill With Key Chuck inlet : /4" 0 pieces in one carton QE-542 QE-543 /2'' Drill /2'' Reversible Drill With Keyless Chuck With Key Chuck inlet : /4" inlet : /4" 0 pieces in one carton 0 pieces in one carton 2pcs Planet Gear x 2Set 3pcs Planet Gear x 2Set 3pcs Planet Gear x 2Set Chuck Size Free Speed Motor Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch(mm) R.P.M hp CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² hp QE-34 /2''(3) 800 0.65 6.5(84) 90(6.3) 9"(230) 3.96.8 3/8" 96.5 0. QE-342 /2''(3) 800 0.60 6.5(84) 90(6.3) 8-/4"(209) 3.74.7 3/8" 96.5 0. QE-343 /2''(3) 800 0.65 6.5(84) 90(6.3) 9"(230) 3.96.8 3/8" 97.5 0. QE-344 /2''(3) 800 0.60 6.5(84) 90(6.3) 8-/4"(209) 3.74.7 3/8" 97.5 0. QE-44 /2''(3) 00 0.50 4.0(2) 90(6.3) 0-53/64"(270) 3.5.58 3/8" 90.0 3.0 QE-442 /2''(3) 300 0.70 4.8(35) 90(6.3) 0-53/64"(270) 3.5.58 3/8" 90.0 3.0 QE-443 /2''(3) 00 0.50 4.0(2) 90(6.3) 0-53/64"(270) 3.8.73 3/8" 90.0 3.0 QE-444 /2''(3) 300 0.70 4.8(35) 90(6.3) 0-53/64"(270) 3.8.73 3/8" 90.0 3.0 QE-542 /2''(3) 300 0.70 4.8(35) 90(6.3) -/64"(280) 3.8.73 3/8" 90.0 2.0 QE-543 /2''(3) 00 0.50 4.0(2) 90(6.3) 0-55/64"(276) 3.8.73 3/8" 90.0 2.0 QE-84 /2''(3) 800 0.45 4.0(3) 90(6.3) 8-/4"(20) 3.7.70 3/8" 83.0 0.3 QE-843 /2''(3) 800 0.45 4.0(3) 90(6.3) 8-/4"(20) 3.9.80 3/8" 83.0 0.3 QE-845 /2''(3) 500 0.45 4.0(3) 90(6.3) 8-/4"(20) 3.9.80 3/8" 83.0 0.3 www.mighty-seven.com 77

AIR DRILL AIR DRILL PC-200 Adjustable Torque Tapping inlet : /4" PC-90 Adjustable Torque Tapping Adapter HEX:8mm For: Drill, Electricity Drill, Cordless Drill,Drill machine QE-23 Spot Drill&Hook inlet : /4" 0 pieces in one carton 8mm drill bit included 6.5.8. 0 mm drill are available Adjustable chunk for esay control Hook is easily removed or installed. High quality piston improves torque and efficiency Common applications are drilling into odd shaped objects. Maximum drill depth:4.5mm steel.3.8mm stainless QE-98L Double Axis Bubble Spirit Level Gradienter Chuck Size Free Speed Motor Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch(mm) R.P.M hp CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² hp QE-23 5/6''(8) 600 0.50 6.0(70) 90(6.3) 9-/4"(235) 4.4 2.00 3/8" 88.2 0. Capacity Free Stroke Avg. Net Sound Vibration Speed Length Consumption Weight Hose Level steel copper aluminum R.P.M inch( mm ) L/cycle PSI (bar) LBS kg Inch dba m/s² PC-200 M3~M8 M3~M2 ----- 50 2"(305) 6.5(84) 90(6.3) 5.4 2.45 3/8'' 82.5 78 www.mighty-seven.com

www.mighty-seven.com 79

AIR SCREWDRIVER AIR SCREWDRIVER Pistoal Type Excellent Straight Type Good Joint & Torque Curve Free Running Hard Stop / Soft Stop Free Running Hard stop/soft stop Self-Tapping Thick Material / Sheet Metal Self-Tapping Thick Material Sheet Metal Self-Tapping Plastic Self-Tapping Plastic Wood Screws Wood screws 80 www.mighty-seven.com Clutch Type Shut-off Screwdriver Adjustable Clutch Adjustable Clutch Twin Dog & Twin Hammer Adjustable Clutch Twin Dog Positive Clutch Twin Dog Model Number M3 M3.5 M4 M5 M6 M8 RA-3023 RA-307 RA-30 RA-4008 RA-323 RA-405 RA-5005 RA-402 RA-5008 RA-507 RA-408 RA-3 RA-45 RA-37 RA-505 RA-42 RA-508 RA-57 RA-3 RA-5 RA-802 RA-32 RA-26 RA-302 RA-4 RA-42 RA-62 RA-30 RA-80 RA-3 RA-5 RA-802 RA-32 RA-26 RA-302 RA-4 RA-42 RA-62 RA-30 RA-80 RA-232 RA-2242 RA-606 RA-2272 RA-242 RA-02 RA-20 RA-608 RA-0 RA-0 RA-272 RA-0C RA-05 RA- RA-3 RA-5 RA-802 RA-32 RA-26 RA-302 RA-4 RA-42 RA-62 RA-30 RA-80 RA-232 RA-2242 RA-606 RA-2272 RA-242 RA-02 RA-20 RA-608 RA-0 RA-05 RA-272 RA-0C RA-8 RA-402 RA-232 RA-2242 RA-606 RA-2272 RA-242 RA-02 RA-20 RA-608 RA-0 RA-05 RA-272 RA-0C

Clutch Type Series internal adjustment RA-3 AIR Screwdriver Adjustable Clutch Screw Capacity : M4 inlet : /4" 0 pieces in one carton 9.5mm RA-4 AIR Screwdriver Adjustable Clutch Screw Capacity : M4 inlet : /4" 0 pieces in one carton 9.5mm RA-5 AIR Screwdriver Adjustable Clutch Screw Capacity : M5 inlet : /4" 0 pieces in one carton 9.5mm RA-26 AIR Screwdriver Adjustable Clutch Screw Capacity : M5 inlet : /4" 0 pieces in one carton 9.5mm Bit Size Torque Range Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch(mm) FT-LB(Nm) R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² RA-3 /4"(6.35) 0.7~2.9(~4) 800 4.5(27) 90(6.3) 9"(228).6 0.76 3/8" 80.0 2.3 RA-4 /4"(6.35) 0.7~2.2(-3) 800 4.5(27) 90(6.3) 8-7/8"(226).6 0.76 3/8" 80.0 2.3 RA-5 /4"(6.35).4~3.7(2~5) 900 4.5(27) 90(6.3) 9-/32"(229) 2.2.0 3/8" 85.0 2.3 RA-26 /4"(6.35).4-3.7(2-5) 750 7.5(22) 90(6.3) 7-5/32"(90) 2.20.00 3/8" 80.0 2.0 www.mighty-seven.com 8

AIR SCREWDRIVER AIR SCREWDRIVER Impact Type Series Twin Dog Type 3mm 3mm RA-0 RA-0C AIR Screwdriver (Twin Dog Type) 20 pieces in one carton Screw Capacity : M4 inlet : /4" RA-0C-Chuck-Type RA-02 AIR Screwdriver Screw Capacity : M5 (Twin Dog Type) inlet : /4" 20 pieces in one carton 3mm 3mm RA-05 AIR Screwdriver (Twin Dog Type) 20 pieces in one carton Screw Capacity : M6 inlet : /4" RA-0 AIR Screwdriver Screw Capacity : M6 (Twin Hammer Type) inlet : /4" 20 pieces in one carton RA-232 3mm RA-242 AIR Screwdriver Screw Capacity : M4 AIR Screwdriver Screw Capacity : M4 (Twin Dog Type) inlet : /4" (Twin Dog Type) inlet : /4" 2 pieces in one carton 2 pieces in one carton 3mm RA-272 3mm RA-606 AIR Screwdriver Screw Capacity : M8 AIR Screwdriver Screw Capacity : M6 (Twin Dog Type) inlet : /4" (Twin Dog Type) inlet : /4" 2 pieces in one carton 2 pieces in one carton 3mm 82 www.mighty-seven.com

RA-608 AIR Screwdriver Screw Capacity : M8 (Twin Dog Type) inlet : /4" 2 pieces in one carton 3mm RA-20 AIR Screwdriver Screw Capacity : M8 (Twin Dog Type) inlet : /4" 2 pieces in one carton 3mm RA-2242 RA-2272 AIR Screwdriver Screw Capacity : M5 AIR Screwdriver Screw Capacity : M8 (Twin Dog Type) inlet : /4" (Twin Dog Type) inlet : /4" 2 pieces in one carton 2 pieces in one carton 3mm 3mm Bit Size Torque Range Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch(mm) FT-LB(Nm) R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² RA-0 /4"(6.35) 3.7-8.9(5-2) 9000 6.0(70) 90(6.3) 6-/2"(66).32 0.6 3/8" 85.7 2.2 RA-02 /4"(6.35) 3.7-0.3(5-4) 9000 6.0(70) 90(6.3) 6-3/4"(72).54 0.7 3/8" 86.7 3.7 RA-05 /4"(6.35) 3.7-6.2(5-22) 8500 8.5(24) 90(6.3) 8-/4"(208) 2.20.0 3/8" 96.7 4.9 RA-0 /4"(6.35) 3.7-29.5(5-40) 8500 8.5(24) 90(6.3) 8-/4"(208) 2.20.0 3/8" 96.7 4.9 RA-232 /4"(6.35) ~22 (5-30) 9000 4.5(27) 90(6.3) 7-/6"(95).47 0.67 3/8" 80.0 3.2 RA-242 /4"(6.35) 4~22 (9~30) 2500 5.0(4) 90(6.3) 6-/6"(70).25 0.57 3/8" 89.0 3.9 RA-272 /4"(6.35) 44-77(60-240) 8000 9.0(254) 90(6.3) 7-27/32"(200) 2.30.06 3/8" 97.0 5. RA-20 /4"(6.35) 3.7-8.5(5-25) 0000 9.0(255) 90(6.3) 7"(80) 2.65.2 3/8" 93.0 5.3 RA-606 /4"(6.35) 3.7-33.2(5-45) 8000 5.6(60) 90(6.3) 7-4/5"(98) 2.2.0 3/8" 82.0 2.2 RA-608 /4"(6.35) 3.7-42.8(5-58) 8000 4.6(30) 90(6.3) 8-9/6"(27) 2.86.3 3/8" 86.0 3.5 RA-2242 /4"(6.35) 8~26(24.4-35.2) 3000 7.0(98) 90(6.3) 5-5/6"(50) 2.0 0.9 3/8" 88.0 2.7 RA-2272 /4"(6.35) 44~77(59-240) 7700 8.5(240) 90(6.3) 7-/6"(95) 3.0.38 3/8" 93.0 4.9 www.mighty-seven.com 83

AIR SCREWDRIVER AIR SCREWDRIVER Clutch Type Series external adjustment RA-32 AIR Screwdriver Adjustable Clutch Screw Capacity : M4 inlet : /4" 0 pieces in one carton 3mm RA-42 AIR Screwdriver Adjustable Clutch Screw Capacity : M4 inlet : /4" 0 pieces in one carton 3mm RA-62 AIR Screwdriver Adjustable Clutch Screw Capacity : M6 inlet : /4" 0 pieces in one carton 3mm RA-30 AIR Screwdriver Adjustable Clutch 9.5mm Screw Capacity : M4 inlet : /4" RA-302 AIR Screwdriver Adjustable Clutch 9.5mm Screw Capacity : M6 inlet : /4" 0 pieces in one carton 0 pieces in one carton 84 www.mighty-seven.com

RA-80 AIR Screwdriver Adjustable Clutch 9.5mm Screw Capacity : M4 inlet : /4" RA-802 AIR Screwdriver Adjustable Clutch 9.5mm Screw Capacity : M6 inlet : /4" 0 pieces in one carton 0 pieces in one carton Positive Clutch Type RA-402 AIR Screwdriver (Positive Clutch Type) 9.5mm Screw Capacity : M6 inlet : /4" RA-8 AIR Screwdriver (Positive Clutch Type) 9.5mm Screw Capacity : M6 inlet : /4" 0 pieces in one carton 0 pieces in one carton Bit Size Torque Range Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch(mm) FT-LB(Nm) R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² RA-32 /4"(6.35) 0.7~2.2(-3) 2200 6.0(70) 90(6.3) 9-7/32"(235).7 0.8 3/8" 80.0 2.3 RA-42 /4"(6.35) 0.7~2.2(-3) 700 5.0(4) 90(6.3) 9-7/32"( 235).34 0.6 3/8" 80.0 2.0 RA-62 /4"(6.35).5~5.9(2-8) 600 6.0(70) 90(6.3) 0-7/6"(265) 2. 0.95 3/8" 90.0 2.2 RA-30 /4"(6.35) 3.8-0(5-3.5) 800 6.0(70) 90(6.3) 7-/2"(90) 2.40. 3/8" 95.3 4.2 RA-302 /4"(6.35) 3.8-2(5-6.3) 800 6.0(70) 90(6.3) 9"(226) 2.80.3 3/8" 96.5 2.2 RA-80 /4"(6.35) 3.8-0.4(5-4) 800 4.0(3) 90(6.3) 7-3/4"(95) 2.70.20 3/8" 83.0 4.2 RA-802 /4"(6.35) 3.8-3.3(5-8) 800 4.0(3) 90(6.3) 8-9/32"(20) 2.80.30 3/8" 83.0 4.2 RA-402 /4"(6.35) 5-4(6~9) 2200 3.9() 90(6.3) 7-3/32"(80) 2.47. 3/8" 9.0 2.3 RA-8 /4"(6.35) 5.0-3.0(6-7) 200 4.0(3) 90(6.3) 7"(78) 2.50.3 3/8" 83.0 3.7 www.mighty-seven.com 85

AIR SCREWDRIVER AIR SCREWDRIVER ZT-3 Digital Torque Tester Torque Range 0~4.7Nm Torque Control or Shut-off 9.5mm 9.5mm RA-3/RA-4 RA-5 SERIES Shut-off Screwdriver inlet : /4" RA-30/RA-40/RA-50 Shut-off Screwdriver SERIES inlet : /4" Proved by the life-time tester, these items can be operated continuously up to.5 million times. Industrial grade, excellent for long continous operation on various mass production lines.. Low noise and vibration rate, high adjustable accuracy up to + - 5%. 20 pieces in one carton Chuck Size Torque Range Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch(mm) FT-LB(Nm) R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² RA-30 /4"(6.35) 9.7-8.5(.-2.) 00 3.2(90.2) 90(6.3) 7-3/8"(87) 0.94 0.42 /4" 70.0 2.0 RA-307 /4"(6.35) 6.2-3.2(0.7-.5) 700 3.2(90.2) 90(6.3) 7-3/8"(87) 0.94 0.42 /4" 70.0 2.0 RA-3023 /4"(6.35) 3.5-8.8(0.4-.0) 2300 3.2(90.2) 90(6.3) 7-3/8"(87) 0.94 0.42 /4" 70.0 2.0 RA-4008 /4"(6.35) 4.-35.4(.6-4.0) 800 3.7(04.3) 90(6.3) 8-/4"(209).43 0.65 /4" 74.0 2.5 RA-405 /4"(6.35) 8.8-9.4(.0-2.2) 500 3.7(04.3) 90(6.3) 8-/4"(209).43 0.65 /4" 74.0 2.5 RA-402 /4"(6.35) 8.8-3.2(.0-.7) 200 3.7(04.3) 90(6.3) 8-/4"(209).43 0.65 /4" 74.0 2.5 RA-5005 /4"(6.35) 44.2-92.9(5.0-0.5) 480 4.0(2.8) 90(6.3) 9-/2"(240) 2.2.0 3/8" 75.0 0 RA-5008 /4"(6.35) 26.5-48.6(3.0-5.5) 800 4.0(2.8) 90(6.3) 9-/2"(240) 2.2.0 3/8" 75.0 0 RA-507 /4"(6.35) 3.2-23.0(.5-2.6) 700 4.0(2.8) 90(6.3) 9-/2"(240) 2.2.0 3/8" 75.0 0 RA-3 7/64''(2.6) 9.7-8.5(.-2.) 00 7.0(98) 90(6.3) 6-/6"(70).57 0.7 /4'' 82.0 0.73 RA-37 /4''(6.35) 6.2-3.2(0.7-.5) 700 7.0(98) 90(6.3) 6-/6''(70).57 0.7 /4'' 84.0.5 RA-323 /4''(6.35) 3.5-8.8(0.4-.0) 2300 7.0(98) 90(6.3) 6-/6''(70).57 0.7 /4'' 84.0.34 RA-408 /4''(6.35) 4.-35.2(.6-4.0) 800 0.5(297) 90(6.3) 6-5/6''(75).92 0.87 /4'' 87.5.8 RA-45 /4''(6.35) 8.8-9.4(.0-2.2) 500 0.5(297) 90(6.3) 6-5/6''(75).92 0.87 /4'' 85.5.59 RA-42 /4''(6.35) 8.8-3.2(.0-.7) 200 0.5(297) 90(6.3) 6-5/6''(75).92 0.87 /4'' 86.8.6 RA-505 /4''(6.35) 44-92.4(5.0-0.5) 480 7.5(496) 90(6.3) 7-4/5''''(98) 2.65.20 /4'' 93. 0.48 RA-508 /4''(6.35) 26.4-48.4(3.0-5.5) 800 7.5(496) 90(6.3) 7-4/5''''(98) 2.65.20 /4'' 93.6 0.93 RA-57 /4''(6.35) 3.2-23(.5-2.6) 700 7.5(496) 90(6.3) 7-4/5''''(98) 2.65.20 /4'' 93.6.35 86 www.mighty-seven.com

78.6 36.2.5 8.7 35.3 67.8 63.2 SP-0/02 SP-03/04 SP-05/ SP-2/3 SPRING BALANCER 30 pieces in one carton SP-22 SP-23 Spring Balancer 30 pieces in one carton SP-3050/3070 SP-3090/350 SP-3320/3300 Spring Balancer 2 pieces in one carton SP-3050-3070 unit:mm 94 9 SP-3090-350 unit:mm 30.8 38.9 45. 29. 3.5 9.7 70 48 235.3 394.6 25 39.2 72. Capacity Travel Rope Rope Dia Weight Kg m mm kg SP-0 0.3~0.8.6 Cable 2.5 0.49 SP-02 0.6~.5.6 Cable 2.5 0.52 8 20 7 SP-3220/3300 unit:mm 47.5 29 35 SP-03.0~2.0.6 Cable 2.5 0.53 SP-04.5~3.0.5 Cable 3.2 0.76 SP-05 3.0~5.0.5 Cable 3.2 0.8 SP- 0.3~0.8.6 Nylon 2.5 0.49 SP-2 0.6~.5.6 Nylon 2.5 0.52 2 5 SP-3.0~2.0.6 Nylon 2.5 0.53 29 20 7 SP-22 0.3~.2.6 Nylon 4.0 0.57 7 SP-23 0.8~2.0.6 Nylon 4.0 0.57 0 3 MIN.46~MAX.96 7 226 SP-3050 3.0~5.0.3 Cable 3.2.82 SP-3070 5.0~7.0.3 Cable 3.2.85 SP-3090 5.0~9.0.3 Cable 4.0 3.59 SP-350 9.0~5.0.3 Cable 4.0 3.6 37 22 8 SP-3220 5.0~22.0.3 Cable 4.8 7.7 SP-3300 22.0~30.0.3 Cable 4.8 8.3 70~0 60 46~83 www.mighty-seven.com 87

AIR SCREWDRIVER AIR SCREWDRIVER 04.5 20 47 30 7 SP-3400/3500 unit:mm 2 7 33 95.4 7 SP-3400 SP-3500 SPRING BALANCER 2 pieces in one carton 2.6 76.5 05~46 88.5 7 7 MIN446~MAX926 2 8 220.4 56~90 4.4 8.3 270.6 5.5 20 SP-3600/3700 unit:mm 47 30 7 2 7 33 95.4 7 4.4 SP-3600 SP-3700 SPRING BALANCER 2 pieces in one carton 2.6 87.5 6~57 88.5 7 MIN.446~MAX.926 7 2 8 220.4 56~90 8.3 270.6 Capacity Travel Rope Rope Dia Weight Kg m mm kg SP-3300 22.0~30.0.3 Cable 4.8 8.3 SP-3400 30.0~40.0.5 Cable 4.8 9.7 SP-3500 40.0~50.0.5 Cable 4.8 0. SP-3600 50.0~60.0.5 Cable 4.8. SP-3700 60.0~70.0.5 Cable 4.8.4 88 www.mighty-seven.com

www.mighty-seven.com 89

AIR SCREWDRIVER AIR HAMMER 30% 20% Lower Vibration Efficiency Compare With ordinary models SC-33C SC-34C Low Vibration Hammer Hammer Round Shank Hammer Hex Shank SC-4 chisel kit is provided along with the tool. inlet : /4" 0 pieces in one carton Vibration-reduced grip Reduce vibration by controlling air passage SC-332C SC-342C Hammer Round Shank Hammer Hex Shank SC-4 chisel kit is provided along with the tool. inlet : /4" 0 pieces in one carton SC-2C SC-22C Hammer Round Shank Hammer Hex Shank SC-4 chisel kit is provided along with the tool. inlet : /4" 0 pieces in one carton SC-22C SC-222C Hammer Round Shank Hammer Hex Shank SC-4 chisel kit is provided along with the tool. inlet : /4" 0 pieces in one carton SN-032 Hammer Round Shank Hammer Hex Shank SC-4 chisel kit is provided along with the tool. inlet : /4" include the chisel 90 www.mighty-seven.com

SN-33C/34C Needle Scaler Adaptor for Hammer Tools use Round / Hex 9pcs 3mmx80mm ltem No. SC-33C Round Shank SC-2/22/33/332 SC-34C Shank Hex Shank Contents SC-22/222/34/342 20 pieces in one carton SC-33C - / Round SC-34C - / Hex SN-90/903 SN-920/9203 Chisel For SN-3/SC-32 SERIES Ø 7.2mm 25mm 25mm SN90 260mm 7.5mm SN920 7.5mm Ø 4.8mm 260mm SN-9203 SN-903 7.5mm 7.5mm Ø 4.8mm SC-07C[SET] pc- Hammer (Various Selections) 5pcs-Chisel Kits pc- Spring Retainer ltem No. Shank Contents SC-057C Round Shank SC-2C SC-0527C Round Shank SC-22C ltem No. Shank Contents SC-067C SC-0627C Hex Shank Hex Shank SC-22C SC-222C 5 pieces in one carton Shank Chuck Size Stroke Length Bolw Per Minute Avg. Consumption Overall Length Net Weight Hose Sound inch(mm) mm bpm CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level bpm SC-2C 0.40(0.2) 67 3200 4.0(3) 90(6.3) 6-7/8"(75) 3.7.7 3/8" 98.0 2.3 SC-22C 0.393(0) 67 3200 4.0(3) 90(6.3) 6-7/8"(75) 3.7.7 3/8" 98.0 2.3 SC-22C 0.40(0.2) 89 2200 4.0(3) 90(6.3) 8-7/8"(225) 4.4 2.0 3/8" 94.7 3.2 SC-222C 0.393(0) 89 2200 4.0(3) 90(6.3) 8-7/8"(225) 4.4 2.0 3/8" 94.7 3.2 SC-332C 0.40(0.2) 92 2200 8.2(232) 90(6.3) 8-63/64"(228) 4.4 2.0 3/8" 94.0 0.6 SC-342C 0.393(0) 92 2200 4.0(3) 90(6.3) 8-63/64"(228) 4.4 2.0 3/8" 94.7 0.6 SN-032 0.5(3) 33 4000 4.23(20) 90(6.3) -/2''(290) 2.9.33 3/8'' 9.0 4.5 www.mighty-seven.com 9

AIR SCREWDRIVER AIR HAMMER SN-3C/32C SN-33C/34C SN-32C/322C SN-323C/324C AIR Chipping Hammer include the chisel SN-322C/323C SN-324C/3222C SN-3223C/3224C AIR Chipping Hammer include the chisel SN-268 Needle Scaler inlet : /4" 0 pieces in one carton SN-288 Needle Scaler inlet : /4" 0 pieces in one carton SN-368 Needle Scaler inlet : /4" 0 pieces in one carton Strengthened internal parts to raise lifespan by one time Strengthened front casing mechanism, not tend to wear out Quick accessory change for needles or chisels Adjust spring easily and effortlessly 50% 0% longer lifetime more Powerful 92 www.mighty-seven.com

SN-224 SN-228 SN-20 Pistol Grip Needle Scaler Pistol Grip Needle Scaler Pistol Needle Scaler inlet : /4" inlet : /4" inlet : /4" 0 pieces in one carton 0 pieces in one carton 0 pieces in one carton Shank Chuck Size Stroke Length Bolw Per Minute Avg. Consumption Overall Length Net Weight Hose Sound inch(mm) mm bpm CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level bpm SN-3 0.68(7.2) 75 2500 0.0(283) 90(6.3) 5-/2''(395) 5.4 7.0 /2'' 5.3 8.0 SN-32 0.58(4.8) 75 2500 0.0(283) 90(6.3) 5-/2''(395) 5.4 7.0 /2'' 5.3 8.0 SN-32 0.68(7.2) 90 2300 20.0(566) 90(6.3) 6''(405) 6. 7.3 /2'' 4.3 9.4 SN-322 0.58(4.8) 90 2300 20.0(566) 90(6.3) 6''(405) 6. 7.3 /2'' 4.3 9.4 SN-33 0.68(7.2) 27 2000 22.0(622.6) 90(6.3) 7-3/4''(450) 7.6 8.0 /2'' 3.3 4.8 SN-323 0.58(4.8) 27 2000 22.0(622.6) 90(6.3) 7-3/4''(450) 7.6 8.0 /2'' 3.3 4.8 SN-34 0.68(7.2) 54 600 24.0(679.2) 90(6.3) 8-/2''(470) 8.3 8.3 /2'' 4. 6.2 SN-324 0.58(4.8) 54 600 24.0(679.2) 90(6.3) 8-/2''(470) 8.3 8.3 /2'' 4. 6.2 SN-322 0.68(7.2) 78 2300 20.0(566) 90(6.3) 4-5/8''(373) 7.2 7.8 /2'' 4.3 9.4 SN-3222 0.58(4.8) 78 2300 20.0(566) 90(6.3) 4-5/8''(373) 7.2 7.8 /2'' 4.3 9.4 SN-323 0.68(7.2) 9 900 22.0(622.6) 90(6.3) 6-/2''(49) 8.7 8.5 /2'' 3.3 4.8 SN-3223 0.58(4.8) 9 900 22.0(622.6) 90(6.3) 6-/2''(49) 8.7 8.5 /2'' 3.3 4.8 SN-324 0.68(7.2) 42 700 24.0(679.2) 90(6.3) 7-/2''(445) 9.4 8.8 /2'' 4. 6.2 SN-3224 0.58(4.8) 42 700 24.0(679.2) 90(6.3) 7-/2''(445) 9.4 8.8 /2'' 4. 6.2 Needle Diameter mm Numbers of Needle Stroke Length Bolw Per Minute Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch(mm) mm bpm CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² bpm SN-268 3x80 9 28 4600 5(424) 90(6.3) 8-/8"(460) 6. 2.80 3/8" 9.0 3.7 SN-288 3x25 2 32 5500 3(84.96) 90(6.3) -3/8"(290) 2.8.30 3/8" 86.0 7.6 SN-368 3x80 9 27 3400 6(453) 90(6.3) 7"(430) 5.9 2.70 3/8" 9.0 3.7 SN-20 3x80 9 33 3700 5(424) 90(6.3) 3"(330) 6. 2.80 3/8" 97.0 9.7 SN-228 3x80 9 28 3500 7.4(98) 90(6.3) 3-9/6"(335) 6.2 2.80 3/8" 00.0 8. SN-224 3x80 9 27 4000 7.4(209) 90(6.3) 3-9/6"(350) 7.9 3.60 3/8" 99.0 4.8 www.mighty-seven.com 93

AIR SCREWDRIVER AIR NAILER AIR STAPLER 94 www.mighty-seven.com

RIVET PA- PA-20 PA-20V PA-2 PA-30 PA-30V PA-32 PA-202 PA-32 PA-40V PA-2ts MATERIAL RIVET MANDREL aluminum aluminum aluminum steel steel steel stainless steel stainless stainless aluminum aluminum aluminum steel steel steel stainless steel stainless stainless aluminum aluminum aluminum steel steel steel stainless steel stainless stainless aluminum aluminum aluminum steel steel steel stainless steel stainless stainless aluminum aluminum aluminum steel steel steel stainless steel stainless stainless aluminum aluminum aluminum steel steel steel stainless steel stainless stainless aluminum aluminum aluminum steel steel steel stainless steel stainless stainless aluminum aluminum aluminum steel steel steel stainless steel stainless stainless aluminum aluminum aluminum steel steel steel stainless steel stainless stainless aluminum aluminum aluminum steel steel steel stainless steel stainless stainless aluminum aluminum aluminum steel steel steel stainless steel stainless stainless RIVET DIAMETER( ØMM) (2.5) (3.0) 4.0 (5.0) 6.4 7.2 8.0 2.4 3.2 4.8 D G2 Ø Rivet (D) Mandrel (L) Rivet Dia. (Ø) Hydramlic cylinder Recommended Oil SHELL Tellus NO.46 ESSO Teresso NO.46 MOBIL D.T.E 25 oil USM Spec NO.300B Oil CPC Circulation Oil R68 L Blind Rivet PA-2TS 2.4mm above27mm.42~.5(g2) 3.2mm above28mm.83~.92(g2) 4.0mm above29mm 2.28~2.42(G2) 4.8mm above30mm 2.64~2.9(G2) 6.4mm above30mm 3.84~4.5(G2) 6.4mm above40mm 3.84~4.5(G2) 8.0mm above40mm 4.35~4.65(G2) www.mighty-seven.com 95

AIR IMPACT WRENCH AIR HYDRAULIC RIVETER PA- Hydraulic Riveter inlet : /4" 4 pieces in one carton PA-20 Hydraulic Riveter inlet : /4" 6 pieces in one carton PA-2 Hydraulic Riveter inlet : /4" 6 pieces in one carton PA-30 Hydraulic Riveter inlet : /4" 4 pieces in one carton PA-32 Hydraulic Riveter inlet : /4" 6 pieces in one carton PA-20V Hydraulic Riveter inlet : /4" Vacuum Type 6 pieces in one carton 96 www.mighty-seven.com

PA-30V PA-40V PA-202 Hydraulic Riveter inlet : /4" Hydraulic Riveter inlet : /4" Hydraulic Riveter inlet : /4" Vacuum Type Vacuum Type Vacuum Type 4 pieces in one carton 6 pieces in one carton 6 pieces in one carton PA-32 Hydraulic Riveter Vacuum Type inlet : /4" 6 pieces in one carton PA-MC Automatic Mandrel Collection CONTENTS 3/32''(2.4mm) 220pcs /8'' (3.2mm) 60pcs 5/32''(4.0mm) 0pcs 3/6''(4.8mm) 80pcs PE-MC Automatic Mandrel Collection Traction Power Stroke Length Capacity Avg. Consumption Net Weight Hose Sound Vibration Level lb.-f(kg.-f) mm mm PSI (bar) L/cycle LBS kg Inch dba m/s² PA- 400(860) 26 4.8-6.4 90(6.3) 2.88 6.6 3.00 3/8" 82.0 0.8 PA-20 3534(603) 4 2.4-6.4 90(6.3) 2.32 3.9.80 3/8" 79.7 0.5 PA-2 3748(700) 8 2.4-6.4 90(6.3) 2.9 3.8.75 3/8" 79.7 0.8 PA-30 2303(045) 6 2.4-4.8 90(6.3).48 3.3.50 3/8" 79.7 0.3 PA-32 262(85) 22 2.4-4.8 90(6.3).48 3.3.50 3/8" 79.7 0.4 PA-20V 3534(603) 4 2.4-6.4 90(6.3) 2.32 3.9.79 3/8" 79.7 0.5 PA-30V 2303(045) 6 2.4-4.8 90(6.3).48 3.3.50 3/8" 79.7 0.3 PA-40V 532(695) 6 2.4-4.0 90(6.3) 0.67 2.5.25 3/8" 79.7 0.3 PA-202 2460(200) 4 3.2-6.4 90(6.3).8 4.2.9 3/8" 79.7 0.3 PA-32 983(900) 8 2.4-4.8 90(6.3).8 3.8.74 3/8" 75.3 0.4 www.mighty-seven.com 97

AIR IMPACT WRENCH AIR HYDRAULIC RIVETER PA-2TS Hydraulic Riveter inlet : /4" 4 pieces in one carton PB-2402 Hydraulic Rivet Nut Tool inlet : /4" 6 pieces in one carton PB-305 PB-308 PB-30 Rivet Nut Tool inlet : /4" Automatic mechanism to quickly push up and pull back rivet. Quick release clip design to change spindle easily. Two trigger design for quick forward/reverse operation. PB-32 Rivet Nut Tool inlet : /4" Traction Power Free Speed Stroke Length Capacity Avg. Consumption Net Weight Hose Sound lb.-f(kg.-f) R.P.M mm mm PSI (bar) L/cycle LBS kg Inch dba m/s² Vibration Level PB-305 ----- 200 ----- M3.M4.M5 90(6.3) 7.8 2.42.0 3/8" 86.0.6 PB-308 ----- 600 ----- M6.M8 90(6.3) 7.8 2.86.30 3/8" 86.0.6 PB-30 ----- 400 ----- M0. M2 90(6.3) 7.8 2.80.30 3/8" 86.0.6 PB-32 ----- 400 ----- M0~M2 90(6.3) 7.8 2.79.28 3/8" 86.0.6 PB-2402 3638(650) ---- 9 Steel M4~M0 Stainless M4~M8 90(6.3).50 3.40.55 3/8" 82.0 0.8 PA-2TS 3748(700) ---- 8 6.4 & 8.0 90(6.3) 2.90 3.80.75 3/8" 79.7 0.8 98 www.mighty-seven.com

PA-9048PT Riveter Adaptor PA48PB06T Riveter Adaptor + Rivet Nut Adaptor PB-9006PT Rivet Nut Adaptor Safety Note Please note the following safety notes to avoid malfunctions, damage or physical injury: Please observe all safety notes of the used driving tool (drill) Always switch off the driving tool and pull off the power plug before maintaining the blind Riveting attachment,e.g. changing the nosepieces or when not in use. Only use the blind bolting attachment as indicated in this manual for setting blind Rivets. The unit is not designed for continuous, professional use. Always secure the work piece. Do not wear loose, clothing or jewellery. Tie up hair or clothing cannot get into moving parts. Persons with limited physical, sensorial or mental abilities are not allowed to use the unit, unless they are supervised for their safety by a qualified person or are briefed by the responsible person how to use the unit. only use the blind Riveting attachment with the included nosepieces. Should the unit become damaged do not use it and have it repaired by a professional or contact our customer support department. Do not disassemble the unit or try repairing it yourself. Do not continue using the unit if it was damaged or the unit was dropped down. Please contact our customer support service. www.mighty-seven.com 99

AIR IMPACT WRENCH AIR HYDRAULIC RIVETER PA-9048 4.8mm (3/6") Riveter Adaptor PA-9064 6.35mm (/4") Riveter Adaptor PB-9006 M6 Rivet Nut Adaptor PB-900 M0 Rivet Nut Adaptor Assembling and Using Before first Use Remove the unit and the accessory out of the packaging. keep packaging materials Out of reach of children.there is risk of suffocation Technical Data PA-9064 PB-9006 Dimensions 59mm x73mm(2-/32 x 6-3/4 inch) Net Weight 330g=0.73 lbs Gross Weight 500g=.0 lbs Nosepiece 3.2mm(/8), 4.0mm(5/32) Nosepiece 4.8mm(3/6),6.4mm(/4) Hex Shank /4" (6.35 mm) Cordless Drill 4.4V,8V Cordless Drive 4.4V,8V Reversible electric /2"Drill Reversible pneumatic /2"Drill Min. Torque Strength 50 Nm = 37 ft/lbs Max. rpm,000 rpm. Hex Shank /4 (6.35 mm) 2. Housing PA+GF 3. Nosepiece 3.2, 4.0, 4.8, 6.4mm 4. Sight Window Blind Rivet Loading 5. Wrench PC 6. Handle PC Dimensions 59mm x72mm(2-/32" x 6-25/32") Weight 280g=0.62 lbs Nosepiece M3 M4 M5 M6 Hex Shank /4" (6.35 mm) Cordless Drill 2V 4.4V Cordless Drive 2V 4.4V Reversible electric Drill (Advice 500W) Reversible pneumatic Drill (Advice 3/8") Min. Torque Strength 5 Nm = ft/ibs Max. rpm 000 rpm 00 www.mighty-seven.com PA-9048 Dimensions 59mm x58mm(2-/32 x 6-3/6 inch) Net Weight 38g=0.70 lbs Gross Weight 368g=0.8 lbs Nosepiece 2.4mm(3/32),3.2mm(/8) Nosepiece 4.0mm(5/32),4.8mm(3/6) Hex Shank /4" (6.35 mm) Cordless Drill 2V 4.4V 8V Cordless Drive 2V 4.4V 8V Reversible electric 3/8"Drill Reversible pneumatic 3/8"Drill Min. Torque Strength Nm = 8 ft/ibs Max. rpm,000 rpm Hex Shank /4 (6.35 mm) 2 Housing PA+GF 3 Nosepiece 2.4mm, 3.2mm, 4.0mm, 4.8mm 4 Sight Window Blind Rivet Loading 5 Wrench PC PB-900 Dimensions 59mm x80mm(2-/32" x 7-3/32") Weight 350g=0.77 lbs Nosepiece M6 M8 M0 Hex Shank /4" (6.35 mm) Cordless Drill 4.4V Cordless Drive 8V Reversible electric Drill (Advice 500W) Reversible pneumatic Drill (Advice /2") Min. Torque Strength 00 Nm = 73.7 ft/ibs Max. rpm 800 rpm

SJ-FN-90E Framing Nailer 34 inlet : /4" 50 57 65 70 75 83 90 mm 2" 2-/4" 2-/2" 2-3/4" 3" 3-/4" 3-/2" inch Collated Nail Head Nail Length Shank Dia. Load Capacity Weight Working mm mm(inch) mm mm Nails kgs PSI SJ-FN-90E Paper / Wire Clipped Head 50~90( ) 2.9 3.3 75-05 4.3 90 www.mighty-seven.com0

AIR SCREWDRIVER AIR NAILER AIR STAPLER 5.2mm.2mm 4.0mm 0.0mm 6 mm 6 mm 22 mm 22 mm SU-C422J SU-C022J 5.8mm SU-9040 3/8'' -9/6'' SJ-650T Nailer inlet : /4" Safety trigger.6mm.4mm 25 mm 50 mm SJ-830 SJ-C830F Nailer inlet : /4" Safety trigger.2mm.0mm 0 mm 30 mm SU-C422J SU-C022J SU-9025 Stapler inlet : /4" SJ-850F SU-806 Nailer.2mm.0mm Stapler 2.8mm Stapler inlet : /4" inlet : /4" inlet : /4" 5/8'' Safety trigger Safety trigger /4'' Safety trigger SU-9040 5.8mm 3/8'' 2'' 5/8'' '' SJ-TN64 Concrete Nailer Brad Nailer inlet : /4" inlet : /4" SJ-BNF-664 20 25 32 38 45 50 57 64 mm 3/4" " -/4" -/2" -3/4" 2" 2-/4" 2-/2" inch 02 www.mighty-seven.com

SU-H358S SU-H3522S SU-H328S SU-H3222S Hand Carton Stapler 22 7/8 mm inch SU-A358S SU-A3522S SU-A328S SU-A3222S Carton Stapler 5 8 mm 5/8 7/0 inch 22 7/8 mm inch Shank Working Dimensions Nail Length Crown (Thickness/Width) Load Capacity Weight mm mm(inch) mm mm mm Nails kgs PS SU-A358S 200*02*400 5&8 32. 0.9 /.9 00 2.49 90 SU-A3522S 200*02*400 22 34.8 0.9 / 2.2 00 2.49 90 SU-A328S 200*02*400 5&8 32. 0.9 /.9 00 2.49 90 SU-A3222S 200*02*400 22 32. 0.9 /.9 00 2.49 90 SU-H358S 30*02*460 5&8 34.8 0.9 / 2.2 00 2.8 ---- SU-H3522S 30*02*460 22 34.8 0.9 / 2.2 00 2.8 ---- SU-H328S 30*02*460 5&8 32. 0.9 /.9 00 2.8 ---- SU-H3222S 30*02*460 22 32. 0.9 /.9 00 2.8 ---- Head Dia. Gauge Nail Length Crown Shank (Thickness/Width) Load Capacity Weight mm mm(inch) mm mm mm mm Nails kgs PS Working SJ-650T ---- 6 20-50 (3/4''-2'') ---- ----.4.60 00 2.35 90 SJ-830F ---- 8 0-30 (3/8''--/6'') ---- ----.0.25 00.0 90 SU-C422J ---- 20 0-22 (3/8''-7/8'') 5.2 0.6x.2 ---- ---- 00.20 90 SU-C022J ---- 20 0-22 (3/8''-7/8'').2 0.6x.2 ---- ---- 00.20 90 SJ-850F ---- 8 20-50 (3/4"-2") ---- ----.0.25 00.48 90 SU-806 ---- 2 6-6 (/4"-5/8") 2.9 0.65x0.95 ---- ---- 60 0.90 90 SU-9025 ---- 8 0-25 (3/8"-") 5.8.0x.25 ---- ---- 00.20 90 SU-9040 ---- 8 9-40 (3/4"--9/6") 5.8.0x.25 ---- ---- 00 2.20 90 SJ-TNT64 7.5 3 (8~64) ---- ---- 2.5 2.50 80 2.35 90 SJ-BNF-664 2.8 3 (20~64) ---- ----.4.60 00 2.32 90 www.mighty-seven.com03

AIR SCREWDRIVER AIR NAILER AIR STAPLER SJ-CN55 Coil Nailer inlet : /4" 25 32 38 45 50 55 57 mm " -/4" -/2" -3/4" 2" 2-3/6" 2-/4" inch SJ-CN70 Coil Nailer inlet : /4" 45 50 57 64 70 mm -/4" 2" 2-/4" 2-/2" 2-3/4" inch SJ-CN57 57mm Coil Nailer inlet : /4" 25 32 38 45 50 55 57 mm " -/4" -/2" -3/4" 2" 2-3/6" 2-/4" inch SJ-CN65 65mm Coil Nailer inlet : /4" 32 38 45 50 55 65 mm -/4" -/2" -3/4" 2" 2-3/6" 2-/2" inch Shank Dia. Head Die. Nail Length Collated Driving Power Load Capacity Dimensions Weight Working mm mm mm (ft-lb) (H*W*L)mm kg PSI SJ-CN55 2.-2.3 5.0-5.7 25~57 Wire 36.54 300-350 283*3*270 2.8 90 SJ-CN70 2.3-2.9 5.7-7.0 45~70 Wire 6.07 50-300 303*29*307 3.7 90 SJ-CN57 2.-2.3 5.0-5.7 25~70 Wire / Plastc 36.40 200-300 30*30*300 2.2 90 SJ-CN65 2.3-2.5 5.0-6.0 32~65 Wire / Plastc 39.70 200-300 330*30*300 2.3 90 04 www.mighty-seven.com

www.mighty-seven.com05

AIR GREASE GUN AIR GREASE GUN SG-400/500 SG-400C SG-40/50 Grease Gun Composite Grease Gun Grease Gun / Continuous Type inlet : /4" inlet : /4" inlet : /4" Note: SG-500 for Australia Note: SG-50 for Australia 0 pieces in one carton 0 pieces in one carton 0 pieces in one carton SG-0 SO-0T SO-0 JC-304/30/33 Lubrication Kit Lubrication Kit Lubrication JC-320/340 Blow Gun inlet : /4" JC-405/40/42 JC-424/435 Blow Gun inlet : /4" JC-49 Standard Safety Tip Available with JC-49 for JC-405 JC-40 JC-42 JC-424 JC-435 JC-304 / JC-405 JC-340 / JC-435 JC-30 / JC-40 JC-33 / JC-42 JC-320 / JC-424 60 pieces in one carton 50 pieces in one carton lathing (safe tenon) 06 www.mighty-seven.com

JC-640/64/680 Super Blow Gun inlet : /4" JC-640/JC-64 40'' JC-680 80'' 30 pieces in one carton 20 JC-64 JC-0424[SET] Blow Gun inlet : /4" Contenes JC-405 8PCS JC-40 8PCS JC-42 8PCS 4 set in one carton JC-045[SET] Blow Gun inlet : /4" Contenes JC-405 5PCS 4 set in one carton Inlet Working Proof Capacity Hose Net Weight Sound Vibration Level inch kgf/cm² kgf/cm² C.C Inch LBS kg dba m/s² SG-400 /4" 2.8-8.4 0.5 400 3/8'' 3.2.46 80.2 0.7 SG-500 /4" 2.8-8.4 0.5 500 3/8'' 3.52.6 80.2 0.7 SG-400C /4" 2.8-8.4 0.5 400 3/8'' 2.2.0 8.4 0.6 SG-40 /4" 2.8-8.4 0.5 400 3/8'' 3.52.6 74.0 2.0 SG-50 /4" 2.8-8.4 0.5 500 3/8'' 3.74.7 74.0 2.0 Nozzle Working Max Avg. Avg. Net Sound Length Consumption Consumption Weight Hose inch PSI (bar) PSI (bar) CFM(L/min) CFM(L/min) LBS kg Inch dba Working MAX /4'' Hous 3/8'' Hous JC-304 4" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.5 0.07 3/8" 90.0 JC-30 0" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.22 0.0 3/8" 90.0 JC-33 3" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.24 0. 3/8" 90.0 JC-320 20" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.3 0.4 3/8" 90.0 JC-340 40" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.50 0.23 3/8" 90.0 JC-405 5" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.24 0. 3/8" 90.0 JC-40 0" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.26 0.2 3/8" 90.0 JC-42 2" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.28 0.3 3/8" 90.0 JC-424 24" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.3 0.4 3/8" 90.0 JC-435 35" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.55 0.25 3/8" 90.0 JC-640 40" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425) 0.75 0.34 3/8" 90.0 JC-680 80" 75-20(5.3-8.5) 50(0.6) 3.0(368) 5.0(425).4 0.64 3/8" 90.0 www.mighty-seven.com07

0.5HP SERIES 0.5HP SERIES 08 www.mighty-seven.com

NE-383 NE-483 /2" & 3/8'' inlet : /4" DRIVE AIR RATCHET WRENCH 0 pieces in one carton Square Drive Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NE-383 3/8" 0-65(3.5-88) 00 35.6 250 5.0(4) 90(6.3) 0-29/32"(277) 2.82.28 3/8" 85 2.0 NE-483 /2" 0-65(3.5-88) 00 35.6 250 5.0(4) 90(6.3) 0-29/32"(277) 2.82.28 3/8" 85 2.0 www.mighty-seven.com09

0.5HP SERIES 0.5HP SERIES NE-462T /2" Drive Angle Impact Ratchet inlet : /4" Pin Ciltch Type 0 pieces in one carton QA-0 A/B Die Grinder inlet : /4" 20 pieces in one carton QA-6 A/B Die Grinder inlet : /4" 20 pieces in one carton QA-68 A/B Die Grinder Spindle lock design. Grease hole 0.5 hp motor inlet : /4" QC-23T 3'' Heavy Duty Cut-Off Tool Note:wheel is supplied with the tool Available Dimension of inner hold : Ø 0mm inlet : /4" Excellent for cutting rusted bolts, nuts, motor exhaust clamps or hangers, sheet metal, fiberglass etc. 20 pieces in one carton QC-234T 4'' Corner Cut-Off Tool 6 pieces in one carton Note:wheel is supplied with the tool Available Dimension of inner hold : Ø 0mm Ø 6mm inlet : /4" 4" Wheel Excellent for cutting rusted bolts, nuts, motor exhaust clamps or hangers, sheet metal, fiberglass etc. 3" Wheel 0 www.mighty-seven.com

QC-264 4" Corner Cut-Off Tool Note:wheel is supplied with the tool Available Dimension of inner hold : Ø 0mm Ø 6mm inlet : /4" 0 pieces in one carton Excellent for cutting rusted bolts, nuts, motor exhaust clamps or hangers, sheet metal, fiberglass etc. QK-T Knife inlet : /4" 0 pieces in one carton 4" Wheel Oscillation Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level per min CFM (L/min) Inch (mm) LBS(kg) Inch dba m/s² QK-T 20000 5.0(4) 8-3/6" (208) 2.0(0.92) 3/8'' 85 3.3 Belt Size Pad Dia Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS kg Inch dba m/s² hp QC-23T 3''(75) 22000 5.0(4) 90(6.3) 7-7/8''(200) 0.5.8 0.82 3/8'' 85.0 3.0 QC-234T 4''(00) 5000 5.0(4) 90(6.3) 3-9/6''(345) 0.5 3..4 3/8'' 85.0 2.2 QC-264 4''(00) 5000 5.0(4) 90(6.3) 9-5/32''(232) 0.5 2.4. 3/8'' 85.0 2.2 Square Drive Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NE-462T /2" 0-65(3.5-88) 00 35 200 5.0(4) 90(6.3) 3-3/32"(340) 4.0.83 3/8" 85.0 2.2 Collet Size Collet Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound A mm B inch R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² hp Vibration Level QA-0 6 & 3 /4'' & /8'' 22000 5.0(4) 90 (6.3) 7-5/6"(86) 0.5.36 0.62 3/8'' 85.0. QA-6 6 & 3 /4'' & /8'' 22000 5.0(4) 90 (6.3) 3-9/6''(345) 0.5 2.53.5 3/8'' 85.0.8 QA-68 6 & 3 /4'' & /8'' 20000 5.0(4) 90 (6.3) 7-/6" (95) 0.5.76 0.8 3/8'' 85.0.8 www.mighty-seven.com

0.5HP SERIES 0.5HP SERIES QP-45 Angle Polisher inlet : /4" Spindle Size :5/6''-24 0 pieces in one carton QE-935 3/8'' Straight Drill With Key Chuck inlet : /4" 20 pieces in one carton 2pcs Planet Gear QB-802T Eraser inlet :/4'' Spindle Size :3/8''-24 20 pieces in one carton QE-936 3/8'' Straight Drill With Key Chuck inlet : /4" 20 pieces in one carton QB-82T Eraser inlet :/4'' Spindle Size :3/8''-24 20 pieces in one carton 2 www.mighty-seven.com

QT-2T QT-203T QT-303 Tyre Buffer 20 pieces in one carton Tyre Buffer / Quick change Chuck inlet : /4" inlet : /4" 2pcs Planet Gear 0 pieces in one carton 2pcs Planet Gear Chuck Size Collet Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound inch(mm) A inch B mm R.P.M CFM (L/min) PSI (bar) Inch (mm) hp LBS(kg) Inch dba m/s² hp Vibration Level QT-2T ---- /4" / 6 4000 5.0 (4) 90(6.3) 8-27/32"(225) 0.5.72 0.78 3/8" 85.0.2 QT-203T Hex.7/6"(.) ---- 4000 5.0 (4) 90(6.3) 8-27/32"(225) 0.5.98 0.90 3/8" 85.0.6 QT-303 Hex.7/6"(.) ---- 22000 5.0 (4) 90(6.3) 8-9/6"(27) 0.5.74 0.79 3/8" 85.0.6 Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS kg Inch dba m/s² hp QB-802T 4000 5.0 (4) 90(6.3) 8-5/32"(22) 0.5 3.08.40 3/8" 85.0.2 QB-82T 4000 5.0 (4) 90(6.3) 8-5/32"(25) 0.5.67 0.76 3/8" 85.0.2 Chuck Size Free Speed Motor Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch(mm) R.P.M hp CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² hp QE-634 3/8''(0) 900 0.5 5.0(4) 90(6.3) 8-/4"(2) 2.35.07 3/8" 85.0. QE-935 3/8''(0) 4000 0.5 5.0(4) 90(6.3) 9"(230).89 0.86 3/8" 85.0.6 QE-936 3/8''(0) 22000 0.5 5.0(4) 90(6.3) 8-9/6''(28).62 0.74 3/8" 85.0.2 Pad Dia Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² hp QP-45 5"(27) 2500 5.0(4) 90(6.3) 8-/32"(2) 0.5 2.5.4 3/8" 85.0. www.mighty-seven.com 3

AUTO REPAIR TOOL AUTO REPAIR TOOL 4 www.mighty-seven.com

NC-0208[SET] /4" Drive Impact Wrench 8 PCS Twin Dog Type inlet :/4'' 0 pieces in one carton pc /4" Impact Wrench (NC-270) 5pcs Socket:8.9.0..2mm pc /4" Drive Universal Joint pc /4" Extension Bar pc Plug NC-270 Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² Vibration Level NC-270 /4" M8 7.4-29.5 (0-40) 29 40 000 5.3(50) 90 (6.3) 5-3/8" (63).76 0.8 3/8" 9.0 3.4 QB-068[SET] 90 Mini Sander Polisher 8 pcs SET inlet : /4" CONTENTS: QB-625 (pcs) Disc 2 PAD (pcs) Disc 3 PAD (pcs) Removal Sandering 2 #80-YL (pcs) 2 #50-RD (2pcs) 2 #300-BL (2pcs) 2 Stripping Disc 3 #80-YL (pcs) 3 #50-RD (2pcs) 3 #300-BL (2pcs) 3 Stripping Dis Adaptor Spanner Oil QB-625 Pad Dia / Arbor Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound inch R.P.M CFM PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² hp Vibration Level QB-625 2'' / 3'' 5000 7.2 90(6.3) 7-/8''(80) 0.6 0.6.3 3/8'' 75 2.5 www.mighty-seven.com 5

AUTO REPAIR TOOL AUTO REPAIR TOOL NC-220N[SET] /4" Drive Impact Wrench Twin Dog Type inlet :/4'' carton / 5 set 20 pieces in one carton Contents: + pc D.R/4" Impact Socket 8 mm + pc D.R/4" Impact Socket 9 mm + pc D.R/4" Impact Socket 0 mm + pc D.R/4" Impact Socket mm + pc D.R/4" Impact Socket 2 mm + pc D.R/4" Extension Bar (L:50mm) + pc D.R/4" Extension Bar (L:25mm) + pc D.R/4" Universal Joint + pc /4" Plug + pc Impact Wrench NC-220 Square Drive Bolt Capacity Torque Range Max Torque Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level Inch Inch (mm) FT-LB (Nm) FT-LB Nm R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² NC-220 /4" M5 4-45( 6-6) 50 67.8 000.8(5) 90(6.3) 6-7/32"(66).4 0.65 3/8" 77.0.8 QA-65N [SET] Die Grinder inlet :/4'' Contents: + pc Die Grinder + pc Collet : 3mm (or/8'') + 5 pcs Grinder Stones 3mm + 5 pcs Grinder Stones 6mm + pc /4 Plug + pc Oil Box + 2 pcs Spanner Wrench carton / 5 set 20 pieces in one carton QA-65 Collet Size Free Speed Avg. Consumption Overall Length Hose Length Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) mm LBS(kg) Inch dba m/s² HP Motor hp QA-65 /4" (6) 8000 2.7(76) 90(6.3) 5" (27) -----.0 0.5 3/8" 74.0 0.3 0.3 6 www.mighty-seven.com

QP-22N[SET] High Speed Sander inlet :/4'' Contents: + pc High Speed Sander + pc 2"Rubber PAD(/4"-20) + pc 2" Pad Die#80 + pc 2"Stripping Disc #80-YL(Coarse) + pc 2" Stripping Disc #50-RD(Med) + pc 3" Rubber PAD(/4"-20) + pc 3" Pad Die#80 + pc 3"Stripping Disc #80-YL(Coarse) + pc 3" Stripping Disc #50-RD(Med) + pc /4"Plug + pc Oil Box + pc Spanner Wrench carton / 5 set QP-22 20 pieces in one carton QP-23N[SET] Orbit Sander inlet :/4'' Contents: + pc Sander + pc 2"PAD(5/6"-24) + pc 3"PAD (5/6"-24) + 0 pcs 2"Sandpaper#80 + 0 pcs 2"Sandpaper#220 + 0 pcs 2"Sandpaper#320 + 0 pcs 3"Sandpaper#80 + 0 pcs 3"Sandpaper#220 + 0 pcs 3"Sandpaper#320 + pc /4"Plug + pc Oil Box + 2 pcs Spanner Wrench carton / 5 set QP-23 20 pieces in one carton Pad Dia Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² Spindle Size hp QP-22 2" or 3'' 8000 2.(59) 90(6.3) 4-/4"(07) 0.3. 0.50 3/8" 73.0 0.9 /4''-20 QP-23 3"(76) 8000 2.(59) 90(6.3) 4-5/8"(7) 0.3. 0.50 3/8" 76.0.2 5/6''-24 www.mighty-seven.com 7

AUTO REPAIR TOOL AUTO REPAIR TOOL QP-223N[SET] Mini Polisher inlet :/4'' Contents: + pc Mini Polisher + pc 2"PAD(5/6"-24) + pc 3"PAD (5/6"-24) + 0 pcs 2"Sandpaper#80 + 0 pcs 2"Sandpaper#220 + 0 pcs 2"Sandpaper#320 + 0 pcs 3"Sandpaper#80 + 0 pcs 3"Sandpaper#220 + 0 pcs 3"Sandpaper#320 + pc /4"Plug + pc Oil Box + 2 pcs Spanner Wrench carton / 5 set 20 pieces in one carton QP-223 Pad Dia Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS(kg) Inch dba m/s² Spindle Size hp QP-223 3"(76) 5500 2.2(62) 90(6.3) 5-/8"(30) 0.3.3 0.50 3/8" 74.0 0.9 5/6''-24 QE-323N [SET] /4'' Reversible Drill inlet :/4'' Contents: + pc 3.5mm Drill Bits + pc 4.0mm Drill Bits + pc 4.5mm Drill Bits + pc 5.0mm Drill Bits + pc 5.5mm Drill Bits + pc Key Wrench + pc /4 Plug + pc Oil Box + pc Reversible Drill carton / 5 set 20 pieces in one carton QE-323 Chuck Size Free Speed Motor Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch/mm R.P.M hp CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² hp QE-323 /4'' (6.35) 600 0.38.9(3) 90(6.3) 6-5/32"(64) 2.5 0.78 3/8" 74.0.2 8 www.mighty-seven.com

RA-505N [SET] Screwdriver Twin Dog Type Screw Capacity : M5 inlet : /4" Contents: + pcs Screwdriver + 2 pcs Bits FD(L:50mm) + 2 pcs Bits PH2(L:65mm) + pcs Bits PH2(L:00mm) + pc /4 Plug + pc Oil Box carton / 5 set 20 pieces in one carton RA-505 Chuck Size Torque Range Free Speed Avg. Consumption Overall Length Net Weight Hose Sound Vibration Level inch(mm) FT-LB(Nm) R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch dba m/s² RA-505 /4"(6.35) 5-45 (6~6) 000.8 (5) 90(6.3) 6-5/6"(6).54 0.7 3/8" 74.0 3.3 QM-25 Pneumatic CV Joint Boots Fitting Tool 0 pieces in one carton Capacity Max Overall Length Net Weight Hose Inch (mm) PSI (bar) PSI (bar) Inch (mm) LBS(kg) Inch QM-25 ''-4-3/8''(25-0) 25(8.6) 90(6.3) 7-3/8"(442) 7.5 3.25 3/8'' QT-02 Tyre Buffer inlet : /4" 0 pieces in one carton QT-203 QT-3 Tyre Buffer / Quick Change Chuck inlet : /4" 0 pieces in one carton Chuck Size Collet Size Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound inch(mm) inch(mm) R.P.M CFM (L/min) PSI (bar) Inch (mm) hp LBS(kg) Inch dba m/s² hp Vibration Level QT-02 ---- /4" (6) 7500 3.0 (85) 90(6.3) 5-/2"(40) 0.3 0.9 0.4 3/8" 77.0.3 QT-203 Hex.7/6"(.) ---- 4000 0.6 (300) 90(6.3) 9-3/4"(250) 0.5.76 0.80 3/8" 75.0 0.87 QT-3 Hex.7/6"(.) ---- 2500 0.6 (300) 90(6.3) 9-3/4"(250) 0.5.76 0.80 3/8" 75.0 0.87 www.mighty-seven.com 9

AUTO REPAIR TOOL AUTO REPAIR TOOL QB-944 QB-0808 surface-cleaning tool inlet :/4'' Surface-Cleaning Tool:pc(QB-802) Eraser Wheel:pc Stripping Wheel :pc Wire Wheel(Coarse):pc Wire Wheel:pcs Allen Key 6mm:pc Spanner Wrench:pc /4" Plug:pc Adapter Male UNF 5/6"-24 Female M6.0:pc 5 pieces in one carton QB-945 QB-9400 QB-82 Eraser inlet :/4'' QB-94 QB-942 Spindle 3/8''-24 QB-802 QB-802-2 surface-cleaning tool surface-cleaning tool inlet :/4'' inlet :/4'' 5 pieces in one carton 5 pieces in one carton SK-3 Caulking Gun SK-00 Caulking Gun SB-20 SB-25 Digtal Tyre Inflator Tyre Inflator inlet :/4'' inlet :/4'' 20 pieces in one carton 20 pieces in one carton 20 www.mighty-seven.com

SB-304 SB-422 SB-423 Digtal Tyre Inflator 20 pieces in one carton Tyre Inflator 20 pieces in one carton Tyre Inflator 2 pieces in one carton inlet :/4'' inlet :/4'' inlet :/4'' SB-50 Tyre Inflator inlet :/4'' 2 pieces in one carton SE-025 Flexible LED Light + Rechargeable working light pc + AC 00~240V ADAPTOR*pc + High strength magnet 60º SE-0 LED Work Lamp USB Charging available Avg. Consumption Overall Length Net Weight Hose CFM (L/min) PSI (bar) Inch (mm) LBS kg Inch SK-00 4.0(3) 50~70(3.4~4.8) 2" (305) 2.43. 3/8'' SK-3 4.0(3) 60~90(4.~6.2) 24-7/6" (620) 2.66.2 3/8'' Free Speed Avg. Consumption Overall Length Motor Net Weight Hose Sound Vibration Level R.P.M CFM (L/min) PSI (bar) Inch (mm) HP LBS kg Inch dba m/s² hp QB-802 3600 0.6(300) 90(6.3) 7-7/8''(200) 0.7 2.6.2 3/8'' 86 0.3 QB-82 4000 0.0(283) 90(6.3) 8-7/8''(225) 0.5.7 0.8 3/8'' 75 0.87 Max Consumption Net Nozzle at 00PSI Inlet Weight Hose Length PSI (bar) CFM linch PSI (bar) LBS kg Inch cm Nozzle MAX SB-20 60(.0).4 /4'' 90(6.3) 0.70 0.32 3/8'' 30 Tyre valve clip SB-25 60(.0).4 /4'' 90(6.3) 0.88 0.40 3/8'' 50 Tyre valve clip SB-304 60(.0).4 /4'' 90(6.3).4 0.65 3/8'' 30 Dual chuck SB-422 60(.0).4 /4'' 90(6.3).2 0.55 3/8'' 45 Tyre valve clip SB-423 220(5.0).4 /4'' 90(6.3) 2.92.33 3/8'' 00 Tyre valve clip SB-50 60(.0).4 /4'' 90(6.3) 2.92.33 3/8'' 30 Dual chuck www.mighty-seven.com2

AUTO REPAIR TOOL AUTO REPAIR TOOL WG-202 Suction & Blow Gun Kit inlet :/4'' WG-202N [ SET ] Suction & Blow Gun Kit inlet :/4'' + Use for cleaning or to suctions dust, wood chips, metal shavings, glass, etc. + This 2 in tool can be used either as air blow gun, or as a air vacuum gun. + Ergonomically designed for user's comfort. Contents: pc Extension Tube pc Small Diameter Vacuum Tube pc Flat Tube pc Brush pc Flexible tube pc Deflector pc Clamping Ring pc Dust Bag SR-0 Brush Brush Cup Mix Bottle Hose Pipette Adaptor Spanner Glass Bottle SQ-027 Powered Brake Caliper Wind Back Tool-Set 7pcs Powered Brake Caliper Wind Back Tool : pc Disk : 6pcs Not available in north America SC-005 Ball Joint & Tie-Rod Splitter SET CONTENTS AIR HAMMER ADAPTER -/8"(28.57mm) PITMAN ARM STRIKING HANDLE /6"(7.46mm) TIE ROD 5/6"(23.8mm) BALL JOINT 0 pieces in one carton 22 www.mighty-seven.com

SM-090 Manual & Pneumatic Fluid Extractor SM-0902 Pneumatic Fluid Extractor SM-0903 Manual Fluid Extractor SM-09 SM-0502 Pneumatic Brake Extractor & Refilled KIT Net Capacity Weight PSI LB KG L SM-090 70-70 0.3 4.7 9.0 SM-0902 70-70 0.3 4.7 9.0 SM-0903 70-70 8.80 4.0 9.0 SM-09 70-70 6.80 3. 9.5 SM-0502 70-70 5.50 2.5 2.0 Hose Avg. Overall Length Consumption Net Weight Sound Level Vacuum Level inch PSI(bar) CFM(L/min) inch(mm) LBS Kg dba m/s2 WG-202 3/8'' 90 3.36 5.7''(45).32 0.6 7.5 92.0 www.mighty-seven.com23

AUTO REPAIR TOOL AUTO REPAIR TOOL SX-30 Sandblasting Gun SX-302 Sandblasting Gun SX-303 Sandblasting Gun SX-3 Underseal Gun SX-32 Underseal Gun Cup Free Avg. Overall Net Sound Capacity Speed Consumption Length Weight Hose L R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS(kg) Inch dba SX-30.0 ----- 4.3 (2.8) 90(6.3) " (280).26 0.57 3/8" 85.0 SX-302 0.7 ----- 4.0 (56.6) 90(6.3) 0-/8" (260) 0.77 0.35 3/8" 85.0 SX-303 ----- ----- 3.5 (56.6) 90(6.3) 22" (300) 2.3 0.5 3/8" 80.0 SX-3.0 ----- 3.0 (84.9) 90(6.3) 0-/8" (260) 0.97 0.44 3/8" 85.0 SX-32 ---- ----- 3.0 (56.6) 90(6.3) 0-/8" (260) 0.48 0.22 3/8" 85.0 24 www.mighty-seven.com

SX-20 Twister Gun Not available in north America SX-65 Cleaning Gun SX-320 Underseal Gun SX-3202 Solvent / Cleaner Spray Gun SX-3203 L Cleaning Gun Cup Free Avg. Overall Net Sound Capacity Speed Consumption Length Weight Hose L R.P.M CFM (L/min) PSI (bar) Inch (mm) LBS(kg) Inch dba SX-20.0 5500 2.0 (56.6) 90(6.3) 8-7/32*4-5/6".7 0.78 3/8" 85.0 20*0mm SX-65.0 ----- 2.0 (56.6) 90(6.3) -7/6" (290) 0.9 0.4 3/8" 85.0 SX-320.8 ----- 3.6 (0.9) 90(6.3) 5-3/6" (400) 2.6 0.98 3/8" 65.0 SX-3202.0 -----.0 (56.6) 90(6.3) 20-3/6" (530).04 0.47 3/8" 65.0 SX-3203.0 -----.0 (28.3) 90(6.3) 8-/2" (290).7 0.53 3/8" 65.0 www.mighty-seven.com25

FILTER,REGULATOR,LUBRICATOR FILTER, REGULATOR LUBRICATOR 26 www.mighty-seven.com

SV-240 FILTER,REGULATOR,LUBRICATOR inlet : /4" SV-2230/2330 FILTER,REGULATOR,LUBRICATOR inlet : /4" / 3/8'' SV-240 SV-2220 FILTER,REGULATOR,LUBRICATOR inlet : /4" in / outlet Max Input Max Output Max.Flow Working Temperature Drain Capacity Oil Capacity Filter Element inch PSI PSI L/min C ml ml µ (micro) Working SV-240 /4" 50 45 00 5~60 5 ----- 5µ SV-2230 /4" 25 70-40 00 5~60 30 55 5µ SV-2330 3/8" 25 70-40 00 5~60 30 55 5µ SV-2220 /4" 50 70-40 00 5~60 5 30 5µ www.mighty-seven.com27

FILTER,REGULATOR,LUBRICATOR FILTER, REGULATOR LUBRICATOR SV-243 FILTER,REGULATOR,LUBRICATOR inlet : /2'' SV-260 FILTER,REGULATOR,LUBRICATOR inlet : /4" SV-360 FILTER,REGULATOR,LUBRICATOR inlet : 3/8" SV-260/360 SV-260 SV-360 28 www.mighty-seven.com

SV-2260 /2280 FILTER,REGULATOR,LUBRICATOR inlet : /4" SV-2360 /2380 FILTER,REGULATOR,LUBRICATOR inlet : 3/8" SV-2280 SV-2260 SV-2380 SV-2360 in / outlet Max Input Max Output Max.Flow Working Temperature Drain Capacity Oil Capacity Filter Element inch PSI PSI L/min C ml ml µ (micro) Working SV-260 /4" 25 45 750 5~60 80 ----- 5µ SV-360 3/8" 25 45 2500 5~60 80 ----- 5µ SV-243 /2" 285 70-40 00 5~60 80 200 5µ SV-2260/2360 /4" / 3/8'' 25 70-50 750 / 2500 5~60 80 50 5µ SV-2280/2380 /4" / 3/8'' 250 70-40 750 / 2500 5~60 80 50 5µ www.mighty-seven.com29

FILTER,REGULATOR,LUBRICATOR FILTER, REGULATOR LUBRICATOR SV-3260 / 3360 FILTER,REGULATOR,LUBRICATOR inlet : /4'', 3/8" SV-3260 SV-3360 SV-3460 FILTER,REGULATOR,LUBRICATOR inlet : /2" 237 82 /4" 86 64 86 237 4 5 SV-3660 30 www.mighty-seven.com

SV-460 FILTER,REGULATOR,LUBRICATOR inlet : /2" SV-460 SV-460 SV-2460 FILTER,REGULATOR,LUBRICATOR inlet : /2" 56 279 4 55 5 98 86 64 SV-3660 in / outlet Max Input Max Output Max.Flow Working Temperature Drain Capacity Oil Capacity Filter Element inch PSI PSI L/min C ml ml µ (micro) Working SV-460 /2 25 45 3000 5~60 80 ----- 5µ SV-2460 /2" 250 7-25 4000 5~60 80 50 5µ SV-3260/3360 /4" / 3/8'' 25 70-50 750 / 2500 5~60 80 50 5µ SV-3460 /2" 250 7-25 4000 5~60 80 50 5µ www.mighty-seven.com3

FILTER,REGULATOR,LUBRICATOR FILTER, REGULATOR LUBRICATOR SV-660 SV-860 FILTER,REGULATOR,LUBRICATOR FILTER,REGULATOR,LUBRICATOR inlet : 3/4" inlet : " SV-860 SV-660 SV-3660/3860 FILTER,REGULATOR,LUBRICATOR inlet : 3/4'' / '' SV-3860 SV-3660 SV-2660 32 www.mighty-seven.com

SV-2660/2860 FILTER,REGULATOR,LUBRICATOR inlet : 3/4" / '' SW-2(/4'') SW-3(3/8'') Mini Lubricator Install in the air hose to provide automatic lubrication. 8c.c. Lubricating oil capacity. in / outlet Max Input Max Output Max.Flow Working Temperature Drain Capacity Oil Capacity Filter Element inch PSI PSI L/min C ml ml µ (micro) Working SV-660 3/4 250 225 4600 5~60 300 ----- 5µ SV-860 250 225 5200 5~60 300 ----- 5µ SV-2660/2860 3/4" / '' 250 225 4600 /5200 5~60 300 300 5µ SV-3660/3860 3/4" / '' 250 225 4600 /5200 5~60 300 350 5µ www.mighty-seven.com33

FILTER HOSE REEL,REGULATOR,LUBRICATOR FILTER, REGULATOR HOSE REEL LUBRICATOR SA-205 Automatic Hose Reel Commercial grade auto-rewind air hose reels have features like steel construction, heavy-duty hoses, Durable springpowered recoil and 6 teeth gear to ensure repeated use and reliability. Case Material : Steel inlet : /4'' - Male SA-325 SA-335 Hose Reel Case Material : Shock-proof plastic inlet : /4'' - Male SA-4320 Hose Reel Case Material : Steel inlet : 3/8'' - Male SA-4420 Hose Reel Case Material : Steel inlet : /2'' - Male 34 www.mighty-seven.com

SD-23/SD-24 Polyurethane Recoil -Hose Returns automatically to the original position and keeps it out of operator's way during operation. Spring guards protects both ends of the hose. Both ends have male 360 swivel fittings. Temperature resistance from -20 C ~ +70 C. SD-22 8 X 2 Hose 24 braids covered PU tube brings the anti-explosion capability up to 350 psi. Spring guards protects both ends of the hose. Both ends have male 360 swivel fittings. Temperature resistance from -20 C ~ +70 C. 30M 7.5M 5M Hose Inside Diameter Hose outside Diameter Hose Length Working Maximum Male PT Fitting mm mm M PSI(bar) PSI(bar) inch kg Weight SA-205 8.0 2.0 5 0.5 (7.0) 284.4(7.8) /4" 6.2 SA-325 8.0 2.0 5 90 (6.3) 300(20.7) /4" 5.0 SA-335 0.0 5.0 5 90 (6.3) 300(20.7) /4" 6.0 SA-4320 0.0 8.0 20 90 (6.3) 300(20.7) 3/8" 24.0 SA-4420 3.0 23.0 20 90 (6.3) 300(20.7) /2" 29.0 SD-2207 8.0 2.0 7.5 0.5 (7.0) 284.4(7.8) /4" 0.8 SD-225 8.0 2.0 5 0.5 (7.0) 284.4(7.8) /4".4 SD-2230 8.0 2.0 30 0.5 (7.0) 284.4(7.8) /4" 2.6 SD-230 8.0 2.0 0 0.5 (7.0) 284.4(7.8) /4" 0.8 SD-235 8.0 2.0 5 0.5 (7.0) 284.4(7.8) /4".2 SD-2320 5.0 8.0 0 0.5 (7.0) 284.4(7.8) /4" 0.4 SD-2325 5.0 8.0 5 0.5 (7.0) 284.4(7.8) /4" 0.6 SD-2335 0 5.0 5 0.5 (7.0) 284.4(7.8) 3/8".9 SD-2445 3 8.0 5 0.5 (7.0) 284.4(7.8) /2" 2. www.mighty-seven.com35

MOBILE CABINETS MOBILE CABINETS NC-4230NE NC-4230 :/2" Drive Impact Wrench Twin Hammer NE-432 :/2" Push Ratchet Wrench /4" Adaptor Couplings Male Thread Type Mini socket set, size:3,7,9,22,24mm QP-23QP Pistol Sander, 3" Pad Dia QP-3 : Pistol Sander, 3" Pad Dia QP-23 : Pistol Polisher, 3" Pad Dia /4" Adaptor Couplings Male Thread Type 3" Sponge (Rough) & 3" Sponge (Medium) 36 www.mighty-seven.com

ST-0C52 ST-0C522S user DIY assembled mobile working chair Color: red/black anti scratch paint Seat cushion materials: high graded artificial PVC leather with sponge Product sizes: long 350mm width 260mm height 240mm, excl. wheels Drawer height: 70mm Product feature: storage daily needed tools reduce squatting fatigue, movable willingly ST-B7 Cabinet With Hose Reel LENGTH WIDTH HEIGHT (MM) (MM) (MM) QTY CABINET 680 460 830 DRAWER 580 580 406 406 70 45 www.mighty-seven.com37

CORDLESS TOOLS 38 www.mighty-seven.com

DW-8502 [ KIT ] Cordless Impact Wrench CONTENTS 2pcs 20V 5.0 Ah Lithium-ion pc Lithium-ion Battery Charger + Max. torque 220 NM / 900 FT-LB + Quick charge-up in 50 minutes + 5.0 Ah battery x 2 pcs included for a longer period of usage. + LED lamp to light up the working area + Battery level LED indicator + Braking function not to damage the screwed object.f DS-0202 Cordless Impact Driver + Max. torque 00 NM + Quick charge-up in 30 minutes + Battery x 2pcs included for a longer period of usage + LED lamp to light up the working area + Battery applicable to all m7 2V cordless models. DJ-835 Cordless Nailer gun + housing : Nylon/Glass Fiber w/soft grip + Trigger Switch : Two-finger w/soft padding + Rated Voltage : 0-20V / 220-240V + DC:8V 2.0Ah Li-ion + Max Firing speed :30 shots/min AJ-835 Electric Nailer gun + housing : Nylon/Glass Fiber w/soft grip + Trigger Switch : Two-finger w/soft padding + Rated Voltage : 220v-240v + Max Firing speed :30 shots/min 5 5/8" 20 3/4" 3 /2" 6 5/8" 25 " 9 3/4" 30 -/6" 22 7/8" 25 " 32 -/4" 28 -/8" 35-3/8" 30-3/6" mm inch mm inch 5 5/8" 20 3/4" 3 /2" 6 5/8" 25 " 9 3/4" 30 -/6" 22 7/8" 25 " 32 -/4" 28 -/8" 35-3/8" 30-3/6" mm inch mm inch Nail Type Crown Shank Thickness / width Length Gauge Dimensions Load Capacity Weight mm mm mm (mm)(hxwxl) (pcs) (kg) AJ-835 Brad Staple ---- 5.8.0/.25.0/.25 5~35 3~30 8 8 23 x 68 x 272 00.9 DJ-835 Brad Staple ---- 5.8.0/.25.0/.25 5~35 3~30 8 8 265 x 82 x 245 00 3.3 Chuck size Max. drill capacity Bolt capacity Battery Max. torque No load speed Impact rate Torque setting inch / mm mm(steel / wood) ---- Li-ion Ah Nm rpm bpm ----- kg Weight DW8502 /2" / 2.7 ---- M6 ~ M24 5.0 220 0~900 0~2200 ------ 3.2 DS0202 /4'' / 6.00 ---- M4 ~ M2 2.0 00 0~2200 0~3000 ------.0 www.mighty-seven.com39

MOBILE CABINETS MOBILE CABINETS 40 www.mighty-seven.com

TE-44220N /2" Torque Wrench,42-20Nm, Engrave Nm / ft-lb scale Accuracy of torque +/- 4% ; Quality meets DIN ISO 6789 & ASME B07.300-200 Adjustable Torque Wrench back tuning Type /2" TORQUE WRENCH,Window display. Nm / ft-lb scale, Back Tuning TW-40202N / TW-404202N / TW-406302N / TW-408402N 3/4" TORQUE WRENCH,Window display. Nm / ft-lb scale, Back Tuning TW-6552N / TW-65752N Accuracy of torque +/- 4% DIN ISO-6789 AMSE B07.4-2004 Drive Torque Range Torque Range Indicator Torque Adjusting D H L Weight (Nm) (ft-lb) mm mm mm kg TW-40202N /2" 20-00 5-75 Magnifying glass Back Tuning 40.5 40 405.02 TW-404202N /2" 40-200 30-50 Magnifying glass Back Tuning 40.5 40 500.20 TW-406302N /2" 60-300 45-200 Magnifying glass Back Tuning 40.5 40 595.33 TW-408402N /2" 80-400 60-300 Magnifying glass Back Tuning 40.5 40 680.82 TW-6552N 3/4" 0-550 75-405 Magnifying glass Back Tuning 63.0 58 970 3.70 TW-65752N 3/4" 50-750 2.5-555 Magnifying glass Back Tuning 63.0 58 50 5.60 TE-44220N /2" 42-20 30.6-55 Engrave Rotating 46.3 33 450.32 www.mighty-seven.com4

IMPACT SOCKET IMPACT SOCKET 42 www.mighty-seven.com

www.mighty-seven.com 43

IMPACT SOCKET IMPACT SOCKET MB3503M 3PC 3/8'' Drive Deep Impact Socket Set Contents :6mm,8mm,9mm,0mm,mm,2mm,3mm, 4mm,5mm,6mm,7mm,8mm,9mm MB3402S 2PC 3/8'' Drive Impact Socket Set Contents : 5/6",3/8",7/6",/2",9/6",5/8",/6",3/4", 3/6",7/8",5/6"," 8 pieces in one carton MB4305M 5PC /2'' Drive Deep Impact Socket Set Contents :0mm mm 2mm 3mm 4mm 5mm 6mm 7mm 9mm 2mm 22mm 24mm 27mm 30mm 32mm 6 pieces in one carton 2 pieces in one carton MB3403M 3PC 3/8'' Drive Impact Socket Set Contents :6mm,8mm,9mm,0mm,mm,2mm,3mm, 4mm,5mm,6mm,7mm,8mm,9mm MB4403S 3PC /2'' Drive Impact Socket Set Contents :7/6",/2",9/6",5/8",/6",3/4",3/6", 7/8",5/6",",-/6'', -/8'' -/4'' 2 pieces in one carton MB3502S 2PC 3/8'' Drive Deep Impact Socket Set Contents :5/6",3/8",7/6",/2",9/6",5/8",/6",3/4", 3/6",7/8",5/6"," 6 pieces in one carton MB4404M 4PC /2'' Drive Impact Socket Set Contents :0mm,mm,2mm,3mm,4mm,5mm,6mm, 7mm,8mm,9mm,2mm,22mm,26mm,27mm 8 pieces in one carton 44 www.mighty-seven.com 8 pieces in one carton

MB4500M 0PC /2'' Drive Deep Impact Socket Set Contents :0mm,2mm,3mm,4mm,5mm,7mm,9mm, 2mm,24mm,27mm MB64008M 4PC 3/4'' Drive Impact Socket Set Contents : 26mm,27mm,29mm,30mm,32mm,33mm 35mm,36mm 6 pieces in one carton MB4503S 3PC /2'' Drive Deep Impact Socket Set Contents :7/6",/2",9/6",5/8",/6",3/4",3/6", 7/8",5/6",",-/6'',-/8'',-/4'' 4 pieces in one carton MB64008S 8PC 3/4'' Drive Impact Socket Set Contents :'',-5/6'',-/6'',-3/8'',-/8'',-7/6'' -/4'',-/2'' 4 pieces in one carton MB4504M 4PC /2'' Drive Deep Impact Socket Set Contents :0mm,mm,2mm,3mm,4mm,5mm,6mm, 7mm,8mm,9mm,2mm,22mm,26mm,27mm 4 pieces in one carton MB64008SP 8PC 3/4'' Drive Impact Socket Set Contents : 3/4'', 7/8'', 5/6'', -/6'', -3/6'', -/4'', -7/6'', -/2'' 4 pieces in one carton 4 pieces in one carton www.mighty-seven.com 45

IMPACT SOCKET IMPACT SOCKET MB65008M 8PC 3/4'' Drive Deep Impact Socket Set Contents :26mm,27mm,29mm,30mm,32mm,33mm 35mm,36mm MB65008S 8PC 3/4'' Drive Deep Impact Socket Set Contents : '',,-/6'',-/8'',-/4'',-5/6'',-3/8'', -7/6'',-/2'' 4 pieces in one carton MB44008S 8pcs /2'' Drive SAE Impact Hex Driver SET(Length 78mm) Contents :/4'', 5/6'', 3/8'', 7/6'',/2'',9/6'',5/8'',3/4'' 2 pieces in one carton MB65008S 8PC 3/4'' Drive Deep Impact Socket Set Contents : 3/4'',7/8'',5/6'','',-/6'',-/8'', -3/6'',-/4'' 2 pieces in one carton MB44008M /2'' Drive /2'' Drive SAE Impact Hex Driver SET Contents :H6, H7, H8, H0, H2,H4,H7, H9 2 pieces in one carton 46 www.mighty-seven.com 2 pieces in one carton

MA8050 5 pcs " Dr. Combination Budd Wheel Impact Socket SET L l D D M7 NO. D D2 l L inch mm mm mm mm g MA82S4826 -/2" 57 57 3/6" 99.34 / MA82M357 35 52 54 7 94.0 / MA82M3820 38 54 56 20 96.8 / MA82M42 4 54 58 2 99.9 / MA83M33L 33 52 52 90.0 / MA8050 --- --- --- --- --- 6.20 /4 MA4030 3 PCS /2" DR. Deep Impact Socket Set Contents : 7mm, 9mm, 2mm By identifying the different color coated, the operator can easily pick up the size needed. With the external sheath, the working object can be well protected from being rubbed, scratched,impacted etc. With the 85mm extra long socket, to loosen or tighten bolt or nut in deeper hole become easier and convenient. Note: Impact socket for aluminum rim wheel nuts, with polymeric material insets. MA4205 5pcs /2''Driver Stubby Metric Size impact Socket SET M7 NO. D D2 T L M7 NO. D D2 T L mm mm mm mm mm g mm mm mm mm mm g MA40M0 0 8 25 5 28 50 5/0 MA40M8 8 28 28 8 28 82 5/0 MA40M 8 25 5 28 50 5/0 MA40M9 9 28 28 9 28 75 5/0 MA40M2 2 9 25 5 28 50 5/0 MA40M20 20 30 30 9 28 90 5/0 MA40M3 3 20 25 5 28 52 5/0 MA40M2 2 30 30 9 28 86 5/0 MA40M4 4 22 25 5 28 53 5/0 MA40M22 22 32 30 9 28 94 5/0 MA40M5 5 23 25 5 28 55 5/0 MA40M23 23 34 30 9 28 02 5/0 MA40M6 6 25 25 8 28 62 5/0 MA40M24 24 34 30 9 28 98 5/0 MA40M7 7 26 26 8 28 67 5/0 www.mighty-seven.com 47

IMPACT SOCKET IMPACT SOCKET /4''MA2M Impact Standard Socket /4" drive standard Length 6 points Metric size L l D2 D M7 NO. D D2 mm mm mm mm mm g MA2M04 4 3.0 7.5 5 23 6 MA2M05 5 3.0 8.7 6 23 6 MA2M06 6 3.0 9.9 8 23 5 MA2M07 7 3.0. 8 23 4 MA2M08 8 3.0 2.3 8 23 4 MA2M09 9 3.0 3.8 8 23 4 MA2M0 0 3.0 4.5 8 23 5 MA2M 3.0 6.0 8 23 7 MA2M2 2 3.0 7.0 8 23 7 MA2M3 3 3.0 8.8 8 23 20 MA2M4 4 3.0 20.0 8 23 2 l L 0 0 0 0 0 0 0 0 0 0 0 /4''MA2S Impact Standard Socket /4" drive standard Length 6 points Inch size /4''MA23M Impact Deep Socket /4" drive Deep Length 6 points Metric size L L l l D2 D D2 M7 NO. M7 NO. D inch mm mm mm mm g D D2 MA2S06 3/6" 3.0 8.4 6 23 5 MA2S07 7/32" 3.0 9.4 6 23 6 MA2S08 /4" 3.0 0.3 8 23 5 MA2S09 9/32" 3.0.3 8 23 5 MA2S0 5/6" 3.0 2.3 8 23 4 MA2S /32" 3.0 3.8 8 23 4 MA2S2 3/8" 3.0 4.5 8 23 5 MA2S4 7/6" 3.0 6.0 8 23 6 MA2S6 /2" 3.0 8.8 8 23 9 MA2S8 9/6" 3.0 9.8 8 23 2 D2 l l mm mm mm mm mm g MA23M04 4 3.0 7.5 7 50 28 MA23M05 5 3.0 8.7 9 50 29 MA23M06 6 3.0 9.9 50 3 MA23M07 7 3.0. 50 3 MA23M08 8 3.0 2.3 3 50 3 MA23M09 9 3.0 3.8 3 50 37 MA23M0 0 3.0 4.5 3 50 37 MA23M 3.0 6.0 3 50 4 MA23M2 2 3.0 7.0 3 50 43 MA23M3 3 3.0 8.8 3 50 58 MA23M4 4 3.0 20.0 3 50 60 L L 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D 48 www.mighty-seven.com

/4''MA23S Impact Deep Socket /4" drive Deep Length 6 points Inch size L l D2 D M7 NO. D D2 inch mm mm mm mm g MA23S06L 3/6" 3.0 8.4 9 50 29 MA23S07L 7/32" 3.0 9.4 9 50 30 MA23S08L /4" 3.0 0.3 50 3 MA23S09L 9/32" 3.0.3 50 32 MA23S0L 5/6" 3.0 2.3 3 50 32 MA23SL /32" 3.0 3.8 3 50 37 MA23S2L 3/8" 3.0 4.5 3 50 4 MA23S4L 7/6" 3.0 6.0 3 50 4 MA23S6L /2" 3.0 8.8 3 50 56 MA23S8L 9/6" 3.0 9.8 3 50 6 l L 0 0 0 0 0 0 0 0 0 0 3/8''MA3M Impact Standard Socket 3/8" drive standard Length 6 points Metric size L l D2 D M7 NO. D D2 mm mm mm mm mm g MA3M06 6 9.0 0.0 9 29.5 3 MA3M07 7 9.0.4 9 29.5 3 MA3M08 8 9.0 2.7 9 29.5 3 MA3M09 9 9.0 4.0 0 29.5 33 MA3M0 0 9.0 5.2 0 29.5 33 MA3M 9.0 7.0 29.5 34 MA3M2 2 9.0 8.0 29.5 35 MA3M3 3 9.0 9.0 29.5 36 MA3M4 4 9.0 20.0 29.5 37 MA3M5 5 9.0 2.9 3 29.5 42 MA3M6 6 22.0 23.5 3 30.0 57 MA3M7 7 22.0 25.0 3 30.0 59 MA3M8 8 22.0 26.0 3 30.0 6 MA3M9 9 22.0 27.0 5 30.0 63 MA3M20 20 22.0 28.0 5 30.0 79 MA3M2 2 22.0 30.0 5 30.0 79 MA3M22 22 22.0 32.0 5 30.0 98 MA3M23 23 22.0 33.0 5 30.0 98 MA3M24 24 22.0 34.0 5 30.0 98 l L 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3/8''MA3S Impact Standard Socket 3/8" drive standard Length 6 points Inch size L l D2 D M7 NO. D D2 l inch mm mm mm mm g MA3S0 5/6" 9.0 2.6 9.0 29.5 3 MA3S2 3/8" 9.0 4.6 0.0 29.5 33 MA3S4 7/6" 9.0 7..0 29.5 33 MA3S6 /2" 9.0 9.0.0 29.5 37 MA3S8 9/6" 9.0 20.0.0 29.5 39 MA3S20 5/8" 22.0 23.5 3.0 30.0 54 MA3S22 /6" 22.0 25.0 3.0 30.0 56 MA3S24 3/4" 22.0 27.0 5.0 30.0 63 MA3S26 3/6" 22.0 30.0 5.0 30.0 79 MA3S28 7/8" 22.0 32.0 5.0 30.0 87 MA3S30 5/6" 22.0 34.0 5.0 30.0 98 MA3S32 " 22.0 36.0 5.0 30.0 00 L 0 0 0 0 0 0 0 0 0 0 0 0 www.mighty-seven.com 49

IMPACT SOCKET IMPACT SOCKET M7 NO. D D2 l L mm mm mm mm mm g 3/8''MA33M Impact Deep Socket 3/8" drive Deep Length 6 points Metric size L l D2 D MA33M06 6 9.0 0. 4 63 73 MA33M07 7 9.0.4 4 63 73 MA33M08 8 9.0 2.7 4 63 73 MA33M09 9 9.0 4.0 4 63 75 MA33M0 0 9.0 5.2 20 63 76 MA33M 9.0 7.0 20 63 8 MA33M2 2 9.0 8.0 22 63 78 MA33M3 3 9.0 9.0 24 63 86 MA33M4 4 9.0 20.0 26 63 93 MA33M5 5 9.0 22.2 27 63 02 MA33M6 6 22.0 23.5 26 63 5 MA33M7 7 22.0 25.0 26 63 27 MA33M8 8 22.0 26.0 26 63 37 MA33M9 9 22.0 27.0 26 63 43 MA33M20 20 22.0 28.0 26 63 43 MA33M2 2 22.0 30.0 26 63 94 MA33M22 22 22.0 32.0 26 63 206 MA33M23 23 22.0 33.0 26 63 206 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3/8''MA33S Impact Deep Socket 3/8" drive Deep Length 6 points Metric size D2 M7 NO. D D2 l L inch mm mm mm mm g L l D MA33S0 5/6" 9.0 2.6 4 63 73 MA33S2 3/8" 9.0 4.6 20 63 76 MA33S4 7/6" 9.0 7. 20 63 8 MA33S6 /2" 9.0 9.0 24 63 83 MA33S8 9/6" 9.0 20.0 26 63 87 MA33S20 5/8" 22.0 23.5 26 63 MA33S22 /6" 22.0 25.0 26 63 25 MA33S24 3/4" 22.0 27.0 26 63 42 MA33S26 3/6" 22.0 30.0 26 63 78 MA33S28 7/8" 22.0 32.0 26 63 88 MA33S30 5/6" 22.0 34.0 26 63 232 MA33S32 " 22.0 36.0 26 63 249 0 0 0 0 0 0 0 0 0 0 0 0 MA42006M /2''Duive Stubby Metric Size impact Socket SET MA42006S /2''Duive Stubby Inch Size impact Socket SET 50 www.mighty-seven.com M7 NO. MA40M3 MA40M7 MA40M9 MA40M2 MA40M22 MA40M24 M7 NO. MA40S6 MA40S8 MA40S20 MA40S22 MA40S24 MA40S28 D D2 l L mm mm mm mm mm g 3 20 25 5 28 54 6/40 7 26 26 8 28 70 6/40 9 28 28 9 28 80 6/40 2 30 30 9 28 90 6/40 22 32 30 9 28 00 6/40 34 34 30 9 28 0 6/40 D D2 l L mm mm mm mm mm g /2" 20 25 5 28 54 6/40 9/6" 22 25 5 28 70 6/40 5/8" 25 25 8 28 80 6/40 /6" 26 25 8 28 90 6/40 3/4" 28 30 9 28 00 6/40 7/8" 32 30 9 28 0 6/40

/2''MA4M Impact Standard Socket /2" drive standard Length 6 points Metric size l L D2 D M7 NO. D D2 mm mm mm mm mm g MA4M08 8 24.9 4.5 9 38 80 0 MA4M09 9 24.9 5.6 0 38 80 0 MA4M0 0 24.9 6.7 0 38 7 0 MA4M 24.9 8.0 0 38 72 0 MA4M2 2 24.9 9.0 38 72 0 MA4M3 3 24.9 20.2 38 74 0 MA4M4 4 24.9 2.5 38 77 0 MA4M5 5 24.9 23.0 2 38 78 0 MA4M6 6 24.9 24.9 2 38 82 0 MA4M7 7 25.0 25.9 3 38 84 0 MA4M8 8 25.0 26.9 3 38 88 0 MA4M9 9 25.0 29.9 3 38 88 0 MA4M20 20 25.0 29.9 3 38 90 0 MA4M2 2 30.0 32.0 4.5 38 93 0 MA4M22 22 30.0 32.0 4.5 38 34 0 MA4M23 23 30.0 34.0 6 42 38 0 MA4M24 24 30.0 36.0 7 42 38 0 MA4M25 25 30.0 36.0 7 42 50 0 MA4M26 26 30.0 38.0 7 42 58 0 MA4M27 27 30.0 40.0 9 46 59 0 MA4M30 30 30.0 4.9 9 46 222 0 MA4M3 3 30.0 43.9 20.5 46 244 0 MA4M32 32 30.0 43.9 20.5 46 238 0 MA4M33 33 35.0 45.9 22 46 290 0 MA4M34 34 35.0 45.9 22 46 330 0 MA4M35 35 35.0 49.9 22 50 357 0 MA4M36 36 35.0 49.9 22 50 376 0 MA4M37 37 44.0 50.9 25 50 380 0 MA4M38 38 44.0 5.9 25 50 390 0 l L /2''MA4S Impact Standard Socket /2" drive standard Length 6 points Inch size l L D2 D M7 NO. D D2 l inch mm mm mm mm g MA4S08 /4" 24.9 2.5 8 38 70 MA4S0 5/6" 24.9 4.5 8 38 70 MA4S2 3/8" 24.9 6.0 8 38 70 MA4S4 7/6" 24.9 8.0 9 38 72 MA4S6 /2" 24.9 20.0 38 74 MA4S8 9/6" 24.9 22.0 38 76 MA4S20 5/8" 24.9 24.9 2 38 8 MA4S22 /6" 25.0 26.0 2 38 83 MA4S24 3/4" 25.0 28.0 2 38 85 MA4S26 3/6" 25.0 30.0 3 38 94 MA4S28 7/8" 30.0 32.0 3 38 34 MA4S30 5/6" 30.0 34.0 5 38 35 MA4S32 " 30.0 36.0 5 38 44 MA4S34 -/6" 30.0 38.0 7 40 203 MA4S36 -/8" 30.0 40.0 8.5 40 260 MA4S38-3/6" 30.0 42.0 8.5 40 280 MA4S40 -/4" 30.0 44.0 8.5 40 290 MA4S42-5/6" 35.0 46.0 2 43 30 MA4S44-3/8" 35.0 48.0 2 43 338 MA4S46-7/6" 44.0 50.0 2 43 357 MA4S48 -/2" 44.0 52.0 23.5 43 376 L 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 www.mighty-seven.com 5

IMPACT SOCKET IMPACT SOCKET D2 l L D /2''MA43S Impact Deep Socket /2" drive Deep Length 6 points Inch size M7 NO. D D2 inch mm mm mm mm g MA43S08 /4" 24.9 2.5 0 82 60 MA43S0 5/6" 24.9 4.5 3 82 60 MA43S2 3/8" 24.9 6.0 5 82 67 MA43S4 7/6" 24.9 8.0 5 82 7 MA43S6 /2" 24.9 20.0 5 82 76 MA43S8 9/6" 24.9 22.0 7 82 8 MA43S20 5/8" 24.9 24.9 8 82 87 MA43S22 /6" 25.0 25.9 8 82 94 MA43S24 3/4" 25.0 27.9 8 82 27 MA43S26 3/6" 25.0 29.9 26 82 227 MA43S28 7/8" 30.0 3.9 26 82 290 MA43S30 5/6" 30.0 33.9 26 82 39 MA43S32 " 30.0 35.9 26 82 346 MA43S34 -/6" 30.0 37.9 26 82 450 MA43S36 -/8" 30.0 39.9 26 82 450 MA43S38-3/6" 30.0 4.9 26 82 480 MA43S40 -/4" 30.0 43.9 26 82 500 MA43S42-5/6" 35.0 45.9 34 90 565 MA43S44-3/8" 35.0 47.9 34 90 595 MA43S46-7/6" 44.0 49.9 34 90 699 MA43S48 -/2" 44.0 5.8 34 90 744 l L 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 /2''MA43M Impact Deep Socket D2 /2" drive Deep Length 6 points l 52 www.mighty-seven.com L Inch size D M7 NO. D D2 l mm mm mm mm mm g MA43M06 6 24.9 2.0 0 82 68 0 MA43M07 7 24.9 3.0 0 82 68 0 MA43M08 8 24.9 4.5 3 82 68 0 MA43M09 9 24.9 5.6 5 82 68 0 MA43M0 0 24.9 6.7 5 82 68 0 MA43M 24.9 8.0 5 82 69 0 MA43M2 2 24.9 9.0 5 82 70 0 MA43M3 3 24.9 20.2 5 82 76 0 MA43M4 4 24.9 2.5 8 82 80 0 MA43M5 5 25.0 23.0 8 82 84 0 MA43M6 6 25.0 24.9 8 82 90 0 MA43M7 7 25.0 25.9 9 82 96 0 MA43M8 8 25.0 26.9 9 82 24 0 MA43M9 9 30.0 29.9 9 82 26 0 MA43M20 20 30.0 29.9 26 82 220 0 MA43M2 2 30.0 3.9 26 82 222 0 MA43M22 22 30.0 3.9 26 82 288 0 MA43M23 23 30.0 33.9 26 82 338 0 MA43M24 24 30.0 35.9 26 82 377 0 MA43M25 25 30.0 35.9 26 82 369 0 MA43M26 26 30.0 37.9 26 82 32 0 MA43M27 27 30.0 39.9 26 82 454 0 MA43M28 28 30.0 39.9 26 82 442 0 MA43M29 29 30.0 4.9 26 82 45 0 MA43M30 30 30.0 4.9 26 82 43 0 MA43M3 3 35.0 43.9 26 90 480 0 MA43M32 32 35.0 43.9 26 90 497 0 MA43M33 33 35.0 45.9 38 90 590 0 MA43M34 34 35.0 45.9 38 90 554 0 MA43M35 35 44.0 49.9 38 93 690 0 MA43M36 36 44.0 49.9 38 93 670 0 L

3/4''MA6S Impact Standard Socket M7 NO. D D2 l L inch mm mm mm mm g 3/4" drive standard Length 6 points Inch size D2 l L D MA6S6 /2" 38 22 6 50 207 MA6S8 9/6" 38 26.5 6 50 229 MA6S20 5/8" 38 27.5 6 50 228 MA6S22 /6" 38 29 6 50 232 MA6S24 3/4" 38 30 6 50 226 MA6S26 3/6" 38 32 8 52 238 MA6S28 7/8" 38 34 8 52 243 MA6S30 5/6" 38 36 8 52 25 MA6S32 " 40 40 8 52 306 MA6S34 -/6" 40 40 8 52 290 MA6S36 -/8" 42 42 8 52 320 MA6S38-3/6" 44 44 8 52 366 MA6S40 -/4" 44 44 8 52 343 MA6S42-5/6" 44 47 22 56 403 MA6S44-3/8" 44 50 22 56 444 MA6S46-7/6" 44 5 22 56 45 MA6S48 -/2" 44 53 22 56 473 MA6S50-9/6" 44 56 25 62 57 MA6S52-5/8" 44 58 25 62 608 MA6S54 -/6" 44 63.5 25 62 733 MA6S56-3/4" 44 65 25 62 762 MA6S58-3/6" 44 67 25 68 870 MA6S60-7/8" 44 68 25 68 879 MA6S62-5/6" 44 70 33 70 960 MA6S64 2" 54 7 33 72 0 MA6S66 2-/6" 54 74 33 72 26 MA6S68 2-/8" 54 77 33 72 239 MA6S70 2-3/6" 54 77 33 74 22 MA6S72 2-/4" 54 80 33 74 353 MA6S74 2-5/6" 54 82 33 75 356 MA6S76 2-3/8" 54 84 33 75 436 MA6S78 2-7/6" 54 85 33 75 796 MA6S80 2-/2" 54 86 33 75 424 MA6S82 2-9/6" 62 89 36 78 627 MA6S84 2-5/8" 62 9 38 80 757 MA6S86 2-/6" 62 93 38 80 850 MA6S88 2-3/4" 62 95 40 82 2003 MA6S90 2-3/6" 62 98 40 82 295 MA6S92 2-7/8" 62 00 40 82 258 MA6S94 2-5/6" 62 02 40 85 2334 MA6S96 3" 62 04 40 87 2535 www.mighty-seven.com 53

IMPACT SOCKET IMPACT SOCKET 3/4''MA6M Impact Standard Socket 3/4" drive standard Length 6 points l L D2 D Metric size M7 NO. D D2 l L MA6M7 7 38 MA6M9 9 38 MA6M20 20 38 MA6M2 2 38 MA6M22 22 38 MA6M23 23 38 MA6M24 24 38 MA6M25 25 38 MA6M26 26 40 MA6M27 27 40 MA6M28 28 42 MA6M29 29 42 MA6M30 30 44 MA6M3 3 44 MA6M32 32 44 MA6M33 33 44 MA6M34 34 44 MA6M35 35 44 MA6M36 36 44 MA6M37 37 44 MA6M38 38 44 MA6M40 40 44 MA6M4 4 44 MA6M42 42 44 MA6M43 43 44 MA6M44 44 44 MA6M45 45 44 MA6M46 46 44 MA6M47 47 44 MA6M48 48 44 MA6M49 49 44 MA6M50 50 54 MA6M52 52 54 MA6M54 54 54 MA6M55 55 54 MA6M56 56 54 MA6M60 60 54 MA6M63 63 54 MA6M65 65 54 mm mm mm mm mm g 28 6 50 225 30 6 50 235 3 6 52 233 32 8 52 239 34 8 52 249 35 8 52 249 36 8 52 246 38 8 52 267 40 8 52 297 40 8 52 285 42 9 52 330 42 9 52 320 44 9 52 368 44 20 52 370 44 22 52 364 47 22 56 4 48 22 56 435 50 22 56 458 5 22 56 472 52 22 56 483 53 22 56 499 56 26 62 568 58 26 62 68 6 26 62 679 63 27 63 734 65 27 63 772 66 27 63 792 67 27 63 85 68 32 68 883 69 32 68 934 70 34 70 994 7 35 72 7 74 35 72 60 77 35 72 236 77 35 74 247 80 35 74 545 84 35 75 454 86 35 75 52 88 35 78 565 54 www.mighty-seven.com

3/4''MA63M Impact Deep Socket D2 M7 NO. D D2 l L mm mm mm mm mm g 3/4" drive Deep Length 6 points Metric size l MA63M9 9 38 MA63M20 20 38 MA63M2 2 38 30.5 85 360 3 2.0 85 37 32 2.0 85 378 L MA63M22 22 38 34 2.5 85 402 MA63M23 23 38 35 3.0 85 45 MA63M24 24 38 36 4.0 85 40 MA63M25 25 38 38 35.0 85 429 MA63M26 26 40 40 35.0 85 487 D MA63M27 27 40 MA63M28 28 42 40 35.0 85 470 42 35.0 85 529 MA63M29 29 42 42 35.0 85 458 MA63M30 30 44 44 35.0 85 573 MA63M3 3 44 44 35.0 85 552 MA63M32 32 44 44 35.0 85 535 MA63M33 33 44 47 35.0 85 64 MA63M34 34 44 48 35.0 85 67 MA63M35 35 44 50 40.0 85 576 MA63M36 36 44 5 40.0 85 684 MA63M37 37 44 52 40.0 85 699 MA63M38 38 44 53 40.0 85 708 MA63M40 40 44 56 40.0 85 763 MA63M4 4 44 58 45.0 85 80 MA63M42 42 44 6 45.0 85 889 MA63M43 43 44 63 55.0 95 68 MA63M44 44 44 65 55.0 95 25 MA63M45 45 44 66 55.0 95 220 MA63M46 46 44 67 55.0 95 259 MA63M47 47 44 68 55.0 95 266 MA63M48 48 44 69 55.0 95 285 MA63M49 49 44 70 55.0 95 354 MA63M50 50 54 7 55.0 95 388 MA63M52 52 54 74 55.0 95 56 MA63M55 55 54 77 55.0 00 664 MA63M60 60 54 84 55.0 05 935 MA63M65 65 54 88 55.0 05 224 www.mighty-seven.com 55

IMPACT SOCKET IMPACT SOCKET 3/4''MA63S Impact Deep Socket D2 3/4" drive Deep Length 6 points Inch size l M7 NO. D D2 l L mm mm mm mm mm g L D MA63S6 /2" 38 MA63S8 9/6" 38 MA63S20 5/8" 38 MA63S22 /6" 38 MA63S24 3/4" 38 MA63S26 3/6" 38 MA63S28 7/8" 38 MA63S30 5/6" 38 MA63S32 " 40 MA63S34 -/6" 40 MA63S36 -/8" 42 MA63S38-3/6" 44 MA63S40 -/4" 44 MA63S42-5/6" 44 MA63S44-3/8" 44 MA63S46-7/6" 44 MA63S48 -/2" 44 MA63S50-9/6" 44 MA63S52-5/8" 44 MA63S54 -/6" 44 MA63S56-3/4" 44 MA63S58-3/6" 44 MA63S60-7/8" 44 MA63S62-5/6" 44 MA63S64 2" 54 MA63S66 2-/6" 54 MA63S68 2-/8" 54 MA63S70 2-3/6" 54 MA63S72 2-/4" 54 MA63S74 2-5/6" 54 MA63S76 2-3/8" 54 MA63S78 2-7/6" 54 MA63S80 2-/2" 54 MA63S82 2-9/6" 62 MA63S84 2-5/8" 62 MA63S86 2-/6" 62 MA63S88 2-3/4" 62 MA63S90 2-3/6" 62 MA63S92 2-7/8" 62 MA63S94 2-5/6" 62 MA63S96 3" 62 22.0 20 85 30 26.5 20 85 364 27.5 20 85 36 29.0 20 85 374 30.0 20 85 364 32.0 25 85 378 34.0 25 85 402 36.0 25 85 44 40.0 35 85 500 40.0 35 85 472 42.0 35 85 57 44.0 35 85 567 44.0 35 85 537 47.0 35 85 605 50.0 40 85 686 5.0 40 85 67 53.0 40 85 697 56.0 40 85 766 58.0 45 85 783 63.5 45 85 979 65.0 45 85 023 67.0 45 85 08 68.0 45 85 087 70.0 45 85 75 7.0 45 85 243 74.0 55 95 478 77.0 55 95 586 77.0 55 95 504 80.0 55 95 650 82.0 55 95 725 84.0 55 95 794 85.0 55 95 737 86.0 55 95 760 89.0 46 00 258 9.0 50 00 2297 93.0 56 05 2383 95.0 56 05 2424 98.0 67 0 2876 00.0 67 0 2905 02.0 80 20 3258 04.0 80 20 3267 56 www.mighty-seven.com

''MA8M Impact Standard Socket D2 " drive standard Length 6 points M7 NO. D D2 l L Metric size mm mm mm mm mm g l MA8M9 9 5 36.0 9 58 490 L MA8M2 2 5 38.0 9 58 487 MA8M22 22 5 39.0 9 58 50 MA8M23 23 5 40.0 9 58 50 MA8M24 24 5 40.0 9 58 508 MA8M25 25 5 4.0 9 58 508 D MA8M26 26 5 MA8M27 27 5 42.5 9 58 508 44.0 9 58 503 MA8M28 28 5 45.0 9 58 53 MA8M29 29 5 46.0 2 60 58 MA8M30 30 5 48.0 2 60 54 MA8M32 32 5 5.0 2 60 566 MA8M33 33 52 53.0 23 62 626 MA8M34 34 52 54.0 23 62 645 MA8M35 35 52 54.0 23 62 655 MA8M36 36 52 56.0 23 62 655 MA8M38 38 52 58.0 23 62 674 MA8M40 40 52 60.0 23 62 680 MA8M4 4 52 6.5 23 62 726 MA8M42 42 52 63.0 25 64 769 MA8M43 43 52 65.0 25 64 80 MA8M44 44 58 66.0 25 64 950 MA8M45 45 58 67.0 25 64 958 MA8M46 46 58 68.0 25 64 976 MA8M50 50 58 73.0 3 70 39 MA8M52 52 58 75.0 3 70 56 MA8M54 54 58 78.0 3 70 232 MA8M55 55 62 79.0 33 72 329 MA8M56 56 62 80.0 35 74 389 MA8M58 58 62 85.0 36 75 590 MA8M60 60 62 87.0 37 78 722 MA8M65 65 62 93.0 38 80 852 MA8M70 70 62 98.0 42 85 27 www.mighty-seven.com 57

IMPACT SOCKET IMPACT SOCKET M7 NO. D D2 l L ''MA8S Impact Standard Socket " drive standard Length 6 points Inch size l L D2 D mm mm mm mm mm g MA8S24 3/4" 50.9 36 8 58 475 MA8S26 3/6" 50.9 38 8 58 486 MA8S28 7/8" 50.9 39 8 58 495 MA8S30 5/6" 50.9 40 8 58 48 MA8S32 " 50.9 42 8 58 497 MA8S34 -/6" 50.9 44 8 58 506 MA8S36 -/8" 50.9 46 8 58 52 MA8S38-3/6" 50.9 48 20 60 545 MA8S40 -/4" 50.9 50.9 20 60 566 MA8S42-5/6" 52.0 52.9 22 62 63 MA8S44-3/8" 52.0 53.9 22 62 634 MA8S46-7/6" 52.0 55.9 22 62 645 MA8S48 -/2" 52.0 58.0 22 62 667 MA8S50-9/6" 52.0 60.0 22 62 697 MA8S52-5/8" 52.0 6.5 22 62 77 MA8S54 -/6" 52.0 65.0 24 64 79 MA8S56-3/4" 58.0 66.0 24 64 944 MA8S58-3/6" 58.0 68.0 24 64 976 MA8S60-7/8" 58.0 70.0 26 66 036 MA8S62-5/6" 58.0 72.0 28 68 037 MA8S64 2" 58.0 74.0 30 70 57 MA8S66 2-/6" 58.0 75.0 30 70 58 MA8S68 2-/8" 58.0 78.0 30 70 22 MA8S70 2-3/6" 62.0 80.0 33 72 350 MA8S72 2-/4" 62.0 84.0 35 75 595 MA8S74 2-5/6" 62.0 86.0 35 75 594 MA8S76 2-3/8" 62.0 87.0 36 78 686 MA8S78 2-7/6" 62.0 89.0 36 78 750 MA8S80 2-/2" 62.0 9.0 37 80 826 MA8S82 2-9/6" 62.0 93.0 37 80 879 MA8S84 2-5/8" 62.0 95.0 39 82 203 MA8S86 2-/6" 62.0 97.0 39 82 987 MA8S88 2-3/4" 62.0 98.0 4 85 2 MA8S90 2-3/6" 62.0 00.0 4 87 222 MA8S92 2-7/8" 62.0 02.0 4 87 234 MA8S94 2-5/6" 86.0 04.0 50 95 257 MA8S96 3" 86.0 06.0 52 98 336 MA8S00 3-/8" 86.0 09.0 52 00 355 MA8S04 3-/4" 86.0 3.0 52 00 3696 MA8S08 3-3/8" 86.0 5.0 52 00 3633 MA8S2 3-/2" 86.0 9.0 52 05 4075 MA8S6 3-5/8" 86.0 27.0 52 0 5023 MA8S20 3-3/4" 86.0 30.0 52 0 4937 MA8S24 3-7/8" 95.0 36.0 52 0 5740 MA8S28 4" 95.0 40.0 62 20 686 MA8S32 4-/8" 95.0 43.0 62 20 6725 MA8S36 4-/4" 95.0 46.0 62 20 686 MA8S44 4-/2" 95.0 52.0 62 20 7068 58 www.mighty-seven.com

M7 NO. D D2 l L ''MA83S Impact Deep Socket " drive Deep Length 6 points Inch size l D2 mm mm mm mm mm g MA83S24 3/4" 5 36 27 90 706 MA83S26 3/6" 5 38 27 90 745 MA83S28 7/8" 5 39 27 90 728 MA83S30 5/6" 5 40 27 90 73 MA83S32 " 5 42 32 90 748 MA83S34 -/6" 5 44 32 90 765 MA83S36 -/8" 5 46 32 90 786 MA83S38-3/6" 5 48 37 90 807 L MA83S40 -/4" 5 5 37 90 862 MA83S42-5/6" 52 53 37 90 923 MA83S44-3/8" 52 54 42 90 933 MA83S46-7/6" 52 56 42 90 942 MA83S48 -/2" 52 58 42 92 008 MA83S50-9/6" 52 60 42 92 058 D MA83S52-5/8" 52 6.5 42 92 077 MA83S54 -/6" 52 65 42 92 208 MA83S56-3/4" 58 66 42 92 33 MA83S58-3/6" 58 68 42 92 356 MA83S60-7/8" 58 70 42 92 47 MA83S62-5/6" 58 72 42 92 468 MA83S64 2" 58 74 52 95 573 MA83S66 2-/6" 58 75 52 95 556 MA83S68 2-/8" 58 78 52 95 702 MA83S70 2-3/6" 62 80 52 00 898 MA83S72 2-/4" 62 84 52 00 2097 MA83S74 2-5/6" 62 86 57 05 2360 MA83S76 2-3/8" 62 87 57 05 2283 MA83S78 2-7/6" 62 89 62 0 252 MA83S80 2-/2" 62 9 62 0 2545 MA83S82 2-9/6" 62 93 72 20 2983 MA83S84 2-5/8" 62 95 72 20 2877 MA83S86 2-/6" 62 97 77 24 3077 MA83S88 2-3/4" 62 98 77 24 335 MA83S90 2-3/6" 62 00 82 28 335 MA83S92 2-7/8" 62 02 82 28 3433 MA83S94 2-5/6" 86 04 87 35 4429 MA83S96 3" 86 06 87 35 454 MA83S00 3-/8" 86 09 87 35 4689 MA83S04 3-/4" 86 3 87 35 4825 MA83S08 3-3/8" 86 5 87 35 500 MA83S2 3-/2" 86 9 87 35 5087 MA83S6 3-5/8" 86 27 90 40 694 MA83S20 3-3/4" 86 30 90 40 6255 MA83S24 3-7/8" 95 36 90 40 692 MA83S28 4" 95 40 05 55 8504 MA83S32 4-/8" 95 43 05 55 8469 MA83S36 4-/4" 95 46 05 55 8538 MA83S44 4-/2" 95 52 05 55 8950 www.mighty-seven.com 59

IMPACT SOCKET IMPACT SOCKET ''MA83M Impact Deep Socket " drive Deep Length 6 points D2 M7 NO. D D2 l L Metric size mm mm mm mm mm g L l D MA83M9 9 5 36 25 58 708 MA83M2 2 5 38 25 58 73 MA83M22 22 5 39 25 58 745 MA83M23 23 5 40 25 58 750 MA83M24 24 5 40 25 58 729 MA83M25 25 5 4 30 58 746 MA83M26 26 5 42.5 30 58 742 MA83M27 27 5 44 30 58 772 MA83M28 28 5 45 30 58 764 MA83M29 29 5 46 30 60 785 MA83M30 30 5 48 35 60 80 MA83M32 32 5 5 35 60 86 MA83M33 33 52 53 35 62 928 MA83M34 34 52 54 40 62 939 MA83M35 35 52 54 40 62 92 MA83M36 36 52 56 40 62 980 MA83M38 38 52 58 40 62 05 MA83M40 40 52 60 40 62 039 MA83M4 4 52 6.5 40 62 087 MA83M42 42 52 63 40 64 5 MA83M43 43 52 65 40 64 200 MA83M44 44 58 66 40 64 330 MA83M45 45 58 67 40 64 345 MA83M46 46 58 68 40 64 37 MA83M50 50 58 73 45 70 53 MA83M52 52 58 75 45 70 522 MA83M54 54 58 78 45 70 685 MA83M55 55 62 79 50 72 848 MA83M56 56 62 80 50 74 859 MA83M58 58 62 85 55 75 2226 MA83M60 60 62 87 55 78 2332 MA83M65 65 62 93 70 80 292 MA83M70 70 62 98 75 85 383 60 www.mighty-seven.com

-/2''MA9M Impact Standard Socket -/2" drive Standard Length 6 points Metric size L l D2 D M7 NO. D D2 l L mm mm mm mm mm g MA9M35 35 86 62 23 78 2200 MA9M4 4 86 70 26 80 2320 MA9M46 46 86 76 27 84 2460 MA9M50 50 86 80 29 87 2590 MA9M5 5 86 82 29 87 260 MA9M52 52 86 83 30 87 2590 MA9M54 54 86 86 36 90 2740 MA9M55 55 86 86 36 90 360 MA9M58 58 86 93 38 90 2870 MA9M60 60 86 93 38 90 2790 MA9M65 65 86 98 40 95 280 MA9M70 70 86 06 43 95 3240 MA9M75 75 86 08 45 03 3430 MA9M80 80 86 8 50 0 490 MA9M85 85 86 25 50 0 4450 MA9M90 90 86 28 55 8 4820 MA9M95 95 95 34 55 8 5830 MA9M00 00 95 38 58 25 5920 MA9M05 05 95 42 58 25 640 MA9M0 0 95 48 66 35 620 MA9M5 5 95 58 66 35 7520 MA9M20 20 95 65 66 35 8360 MA9M30 30 27 78 72 40 9040 -/2''MA93M Impact Deep Socket D2 l L D -/2" drive Deep Length 6 points Metric size M7 NO. D D2 l L mm mm mm mm mm g MA93M4 4 86 70 32 5 3070 MA93M5 5 86 82 38 35 3940 MA93M54 54 86 86 36 40 430 MA93M55 55 86 86 36 40 4670 MA93M58 58 86 93 43 50 4950 MA93M60 60 86 93 45 50 4900 MA93M65 65 86 98 47 50 5070 MA93M70 70 86 06 49 60 6050 MA93M75 75 86 08 53 70 6270 MA93M80 80 86 8 53 70 730 MA93M85 85 86 25 58 70 7900 MA93M90 90 86 28 62 70 7790 MA93M95 95 95 34 65 80 9070 MA93M00 00 95 38 68 90 9770 MA93M0 0 95 48 75 90 0390 MA93M5 5 95 58 80 20 2930 MA93M20 20 95 65 80 20 560 MA93M25 25 95 68 80 20 350 www.mighty-seven.com 6

IMPACT SOCKET IMPACT SOCKET 3/4'' ME62 3/4" Drive Extension Bar /4''ME22 /4" Drive Extension Bar M7 NO. ME62-04 ME62-06 ME62-07 ME62-08 ME62-0 ME62-3 Total Length inch mm g 4-+'' 6'' 7'' 8'' 0'' 3'' 00 50 75 200 250 330 609 83 9 929 200 480 0 0 0 0 0 0 M7 NO. ME22-02 ME22-04 ME22-06 Total Length inch mm g 2'' 4'' 6'' 50 00 50 26 46 67 0 0 0 ''ME82 " Drive Extension Bar 3/8''ME32 3/8" Drive Extension Bar M7 NO. Total Length inch mm g M7 NO. ME82-03 ME82-06 ME82-07 ME82-08 ME82-0 ME82-2 ME82-3 Total Length inch mm g 3'' 6'' 7'' 8'' 0'' 2'' 3'' 75 50 75 200 250 300 330 727 330 520 705 2050 2382 2550 0 0 0 0 0 0 0 ME32-03 ME32-05 ME32-06 ME32-0 ME32-2 ME32-5 3'' 5'' 6'' 0'' 2'' 5'' 75 25 50 250 300 375 79 24 40 242 288 354 0 0 0 0 0 0 ME422 /2" Drive Torque Extension Bar /2''ME42 /2" Drive Extension Bar M7 NO. ME42-03 ME42-05 ME42-0 ME42-5 Total Length inch mm g 3'' 5'' 0'' 5'' 75 25 250 375 42 228 653 04 0 0 0 0 M7 NO. M7 NO. ME422-090 ME422-0 ME422-090 ME422-22 ME422-0 ME422-37 ME422-22 ME422-5 ME422-37 ME422-03 ME422-5 ME422-4 ME422-03 ME422-28 ME422-4 ME422-28 Color Color Yellow Yellow Blue Gray Blue White Gray Sky White nature Sky Black nature Black Beige Orange Beige Orange Total Length d Torque Total Length d Torque mm mm Ft / Nm g mm mm Ft / Nm g 94 9 65/90 236 2/20 94 9 80/0 65/90 23 236 0 94 2.2 00/35 80/0 258 23 0 94 2.2 3.7 20/60 00/35 300 258 0 94 3.7 5. 40/90 20/60 306 300 0 94 5. 0.3 40/90 75/00 224 306 0 94 0.3.4 90/20 75/00 242 224 0 94.4 2.8 0/50 90/20 269 242 0 94 2.8 0/50 269 0 62 www.mighty-seven.com

/2''ME47S /2'' Drive SAE Impact Hex Driver Drive Male Adapter M7 NO. d L Spec mm mm g ME382 ME384 ME483 ME486 ME688 ME684 ME886 ME889 3/8''F x /4''M 3/8''F x /2''M /2''F x 3/8''M /2''F x 3/4''M 3/4''F x ''M 3/4''F x /2''M ''F x 3/4''M ''F x -/2''M 22 22 25 30 46 44 56 54 32 32 38 48 68 60 80 90 2 50 65 6 437 343 653 078 0 0 0 0 0 0 0 0 M7 NO. Total Length Drive Universal Joint ME47S08L ME47S0L inch mm g /4'' 5/6'' 78 78 69 94 0 0 Total M7 NO. Size Total d Length inch inch mm inch inch mm mm g g ME47S2L ME47S4L ME47S6L ME47S8L ME47S20L ME47S22L ME47S24L 3/8'' 7/6'' /2'' 9/6'' 5/8'' /6'' 3/4'' 78 78 78 78 78 78 78 05 9 34 5 73 94 25 0 0 0 0 0 0 0 ME27 ME37 ME47 ME67 ME87 ME97 /4'' 3/8'' /2'' 3/4'' '' -/2'' 20 27 34 49 59 90-3/4'' 65 2'' 5 2-7/6'' 6 3-/2'' 90.4 4-/2'' 4 6-/6'' 70 42 02 208 64 99 32 0 0 0 0 0 0 0 ME47S26L 3/6'' 78 229 0 /2''ME47M /2'' Drive SAE Impact Hex Driver 3/8''MB37S 3/8'' Drive Bit Holder M7 NO. Total Length inch mm g MB37S 3/8" 40 44(0.09) 0 M7 NO. Total Length inch mm g SOCKET STICKERS PACK ME47MO4L ME47MO5L ME47MO6L ME47MO7L ME47MO8L ME47MO9L ME47M0L ME47ML ME47M2L ME47M3L ME47M4L ME47M5L ME47M6L ME47M7L ME47M8L ME47M9L ME47M2L 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 7 77 8 87 95 02 08 8 28 40 49 66 77 88 202 25 233 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 M7 NO. drive 8702 /4'' 8703 3/8'' 8704 /2'' 8706 3/4'' 8708 '' 00 pieces in one carton www.mighty-seven.com 63

IMPACT SOCKET IMPACT SOCKET /2" ME904 /2" Drive Locking Ring / /2" Drive Locking Pin 3/8" ME903 3/8" Drive Locking Ring / 3/8" Drive Locking Pin d2 Ø l d2 M7 NO. ME9035 ME9035 ME90324 ME90324 3/4" ME906 3/4" Drive Locking Ring/3/4" Drive Locking Pin d2 Ø Desp. Ring Pin Ring Pin Ø Ø d2 l l mm mm mm 3.5 2.5 2.5 2.5 3 6 5 8 l Applied to socket sizes 8~24mm (5/6''~3/6'') 2~32mm (7/8''~-/4'') M7 NO. ME90424 ME90424 ME90432 ME90432 ME90436 ME90436 ME90434 ME90434 ME90458 ME90458 " ME908 " Drive Locking Ring/" Drive Locking Pin d2 Desp. Ring Pin Ring Pin Ring Pin Ring Pin Ring Pin Ø Ø d2 mm mm mm 4 4 4 4 4 4 4 4 4 4 20 25 30 38 46 l 8 20.5 25.5 30.5 39.5 Applied to socket sizes 8~24mm (5/6''~3/6'') 2~32mm (7/8''~-/4'') 33~36mm (-5/6''~-3/8'') 37~34mm (-7/6''~-5/6'') 50~58mm (2''~2-/4'') M7 NO. Desp. Ø d2 l Applied to socket sizes l ME90627 ME90627 ME90646 ME90646 ME90650 ME90650 Ring Pin Ring Pin Ring Pin mm mm mm 4 32 4 32 4 36 4 35.5 4 46 4 46 7~27mm (/2''~-/8'') 28~49mm (-/8''~-5/6'') 50mm~65mm (2''~2-/2'') M7 NO. ME90836 ME90836 ME90860 ME90860 Desp. Ring Pin Ring Pin Ø d2 l mm mm mm 5 48 5 0 75 0 46 80 Applied to socket sizes 9~70mm (3/4''~2-7/8'' ) ( 2-5/6''~3-3/4'' ) AD-22/23/24 Magnetic aluminum rail M7 NO. Drive Total Length inch inch mm g AD-222 /4'' 2'' 300 25 0 AD-232 3/8'' 2'' 300 25 0 AD-242 /2'' 2'' 300 25 0 AD-228 /4'' 8'' 457 26 0 AD-238 3/8'' 8'' 457 26 0 AD-248 /2'' 8'' 457 26 0 48 pieces in one carton 64 www.mighty-seven.com

AFTER MARKET SUPPORT AD-307 Wall Type Display Stand Powder coating Attachment pc 2pcs 2pcs pc 4pcs Brand Plate Angled Steel Frame Shelf Bottom Shelf Steel Plate With Hole Overall Size(mm) Width x Depth x Height 900 x 500 x 2230 AD-35 Optional Item AD-36 Optional Item Overall Size(mm) Width x Depth 280 x 90 mm AD-306 Table Type Display Stand pc Transparent DM shelf 2 pcs support frame pc Bottom shelf 3 set (AD-352/3522/3523) Overall Size(mm) Width x Depth x Height 300 x 40 x 340 AD-35 Complete set of Tool Base Item No. Adaptor Type Contents AD-350 Europe AD-35 SY-2M AD-352 AD-3502 Japan AD-35 SY-22M AD-3522 AD-3503 U.S.A AD-35 SY-23M AD-3523 AD-36 Complete set of Tool Base Item No. Adaptor Type Contents AD-360 Europe AD-305-4 SY-2M AD-352 AD-3602 Japan AD-305-4 SY-22M AD-3522 AD-3603 U.S.A SY-23M AD-3523 AD-305-4 www.mighty-seven.com 65

IMPACT SOCKET SANDING ACCESSORIES 460mm (8.'') AD-308 Tower Type Display Stand 350mm pc Transparent DM shelf 2 pcs support frame pc Bottom shelf Contains Package net weight gross weight length width highly kg kg mm mm mm 980mm (77.9'') 600mm (63.0'') Lamp Case Set 4.35 5.35 530 50 0 Display Pillar 8.0 9.0 930 330 80 Display Stand Bottom Plate 0.45.45 80 820 70 AD-305-4 Optional ltem T=3mm (0.'') AD-20 /2" DR. Socket Shelf Set 750mm (29.5'') SF-306 / SF-604 SF-605 Spare Parts Box greasy-resisting wearproof Overall Size(mm) Width x Depth x Height SF-306 303 x 06 x 253 (.8''x4.''x'') SF-604 603 x 67 x 203 (23.7''x6.5''x8'') SF-605 603 x 23 x 53 (23.7''x4.8''x6'') 40mm AD-43 /2" DR. Socket Shelf Set 340mm 270mm SF-306 SF-605 SF-604 66 www.mighty-seven.com

www.mighty-seven.com 67

IMPACT SOCKET SANDING ACCESSORIES PAD Series backing Face : velcro are available. ITEM NO. SIZE R.P.M QB-9302 2'' 5000 QB-9303 3'' 5000 QB-9323 3'' 20000 QB-9305 5'' 2000 QB-9306 6'' 2000 PAD Series backing Face : vinyl are available. ITEM NO. SIZE R.P.M QB-9342 2'' 5000 QB-9343 3'' 5000 QB-9345 5'' 2000 QB-9307 6'' 2000 68 www.mighty-seven.com

PAD Series six hole backing Face : velcro & vinyl are available. ITEM NO. SIZE R.P.M QB-935 (velcro) 5'' 2000 QB-9355 (vinyl) 5'' 0000 QB-936 (velcro) 6'' 0000 QB-9356 (vinyl) 6'' 0000 PAD Series fifteen hole backing Face : velcro & vinyl are available. ITEM NO. SIZE R.P.M For m7 item NO. QB-9327 (velcro) 6'' 2000 QB-9366 (vinyl) 6'' 2000 QB-9337M QB-9337S PAD Available with QP-37 ITEM NO. SIZE R.P.M Thread Size QB-9337M 7'' 5,000 M4*2.0 QB-9337S 7'' 5,000 5/8''* QB-922 / QB-923 Roll On Holder ITEM NO. SIZE R.P.M For m7 item NO. QB-922 2'' 30000 QP-22 QB-923 3'' 20000 QB-625 QB-923 QB-922 QB-9320 FOR OK-2 69

IMPACT SOCKET SANDING ACCESSORIES PAD DIE Series 5 pcs / SET ITEM NO. SIZE PS. R.P.M For m7 item NO. QB-9702k-24 Grit:#24 QB-9702k-40 Grit:#40 QB-9702k-60 Grit:#60 QB-9702k-80 Grit:#80 QB-9702k-00 2'' Grit:#00 30,000 QB-9702k-20 Grit:#20 QB-9702k-50 Grit:#50 QB-9702k-80 QB-9702k-240 QB-9703k-24 QB-9703k-40 QB-9703k-60 QB-9703k-80 Grit:#80 Grit:#240 Grit:#24 Grit:#40 Grit:#60 Grit:#80 QP-22 QP-22N QB-625 QB-068 QB-9703k-00 3'' Grit:#00 25,000 QB-9703k-20 Grit:#20 QB-9703k-50 Grit:#50 QB-9703k-80 Grit:#80 QB-9703k-320 Grit:#320 SANDING Disc 5 pcs / SET ITEM NO. SIZE PS. R.P.M For m7 item NO. QB-972-YL 2'' Yellow-coarse #80 QB-972-RD 2'' Red-Medium #50 QB-972-BL 2'' Blue-Fine #300 QB-973-YL 3'' Yellow-coarse #80 QB-973-RD 3'' Red-Medium #50 30,000 QP-22 QP-22N QB-625 QB-068 QB-973-BL 3'' Blue-Fine #300 70 www.mighty-seven.com

QB-95 SERIES Wool Bonnet PAD Available with ITEM NO. SIZE PS. 0QB-952 2" Velcro 0QB-953 3" Velcro 0QB-955 5" Velcro 0QB-957 7" Velcro 0QB-9507 7" Ticonband QB-94 SERIES Sponge Available with QB-802 ITEM NO. SIZE PS. Thickness 0QB-9402 2" Yellow / Rough 25mm 0QB-9422 2" White / Medium 25mm 0QB-9403 3" Yellow / Rough 25mm 0QB-943 3" White / Medium 25mm 0QB-9404 4" Yellow / Rough 25mm 0QB-9424 4" White / Medium 25mm 0QB-9405 5" Yellow / Rough 25mm 0QB-9425 5" White / Medium 25mm 0QB-9406 6" Yellow / Rough 25mm 0QB-9426 6" White / Medium 25mm 0QB-9407 7" Yellow / Rough 25mm 0QB-9427 7" White / Medium 25mm QB-972K / QB-973K Stripping Disc Available with Itme NO. SIZE R.P.M QB-972K 2" 5,000 QB-9434 QB-9434U Eraser Wheel Available with QB-82T FOR USA QB-973K 3" 5,000 5 pcs / SET QB-940 Wire Wheel Available with QB-802 QB-82 QB-944 Eraser Wheel Available with QB-802 QB-82 7

IMPACT SOCKET ACCESSORIES SY-2002M Regulator & 360º Rotatable Adaptor inlet /4'' SY-200M 360º Rotatable Adaptor inlet /4'' SY-M SY-F Adaptor / Quick Couplings ltem No. Thread Type Thread Size Type Picture SY-2M SY-2F Male Female /4'' PT Europe SY-22M SY-32M SY-22F SY-32F Male Female /4'' PT 3/8'' PT /4'' PT 3/8'' PT Japan SY-23M SY-23F Male Female /4'' NPT U.S.A SY-25M SY-35M SY-25F SY-35F Male Female /4'' PT 3/8'' PT /4'' PT 3/8'' PT France ltem No. Thread Type Thread Size Type Picture SY-20M SY-20F Male Female /4'' PT Europe SY-220M SY-320M SY-220F SY-320F Male Female /4'' PT 3/8'' PT /4'' PT 3/8'' PT Japan SY-230M SY-230F Male Female /4'' NPT U.S.A Two - stage safety quick connector structure. The joint can be discouraged in two sections. The joint structure can quickly distinguish. ltem No. Thread Type Thread Size Type Picture SY-20SM SY-20SF Male Female /4'' PT 3/8'' PT Europe SY-220SM SY-220SF Male Female /4'' PT 3/8'' PT Japan SY-230SM SY-230SF Male Female /4'' NPT 3/8'' NPT U.S.A SY-250SM SY-250SF Male Female /4'' PT 3/8'' PT France 72 www.mighty-seven.com

Safety lock ratchet structure Three kinds of connectors can be used together. (SY-20SM-L) ltem No. Thread Type Thread Size Type Picture SY-20SM-L SY-20SF-L Male Female /4'' PT 3/8'' PT Europe France (Safety ratchet type) SY-220SM-L SY-220SF-L Male Female /4'' PT 3/8'' PT Japan (Safety ratchet type) Composte Quick Coupling ltem No. Thread Type Thread Size Type Picture SY-023M SY-033M SY-043M Male /4'' PT 3/8 PT /2 PT Europe SY-0223M SY-0323M SY-0423M Male /4'' PT 3/8 PT /2 PT Japan SY-0233M SY-0333M SY-0433M Male /4'' PT 3/8 PT /2 PT U.S.A France ltem No. Thread Type Thread Size Type Picture SY-23F SY-33F SY-43F Female /4'' PT 3/8 PT /2 PT Europe SY-223F SY-323F SY-423F Female /4'' PT 3/8 PT /2 PT Japan SY-233F SY-333F SY-433F Female /4'' PT 3/8 PT /2 PT U.S.A France ltem No. Thread Type Thread Size Type Picture SY-223P SY-233P SY-243P ----- 5X8 PU 6.5X0 PU 8X2 PU Europe SY-2223P SY-2323P SY-2423P ----- 5X8 PU 6.5X0 PU 8X2 PU Japan SY-2233P SY-2333P SY-2433P ----- 5X8 PU 6.5X0 PU 8X2 PU U.S.A France ltem No. Thread Type Thread Size Type Picture SY-33H SY-323H SY-333H SY-343H ----- 0SH /4'' 20SH 5/6'' 30SH 3/8'' 40SH /2'' Europe SY-323H SY-3223H SY-3323H SY-3423H ----- 0SH /4'' 20SH 5/6'' 30SH 3/8'' 40SH /2'' Japan SY-333H SY-3233H SY-3333H SY-3433H ----- 0SH /4'' 20SH 5/6'' 30SH 3/8'' 40SH /2'' U.S.A France 73

IMPACT SOCKET ACCESSORIES QB-904 QB-905 QB-906 Grinding Wheel Materials:Aluminum Oxide ITEM NO. 0QB-904 0QB-905 Pad Dia Arbor Size 00x6x6 4''x/4''x5/8'' 25x6x22 5''x/4''x7/8'' 25 / 200 25 / 200 0QB-905 80x6x22 7''x/4''x7/8'' 25 / 200 QB-93 QB-94 Cut-off Wheel ITEM NO. Arbor Hole For m7 item NO. 0QB-93 0QB-94 3''x/6''x3/8'' (75x.5x0) 4''x/6''x3/8'' (00x.5x0) 25 / 200 25 / 200 QC-23/ QC-23T QC-253 QC-23 / QC-23T QC-253 / QC-264 QB-92 [SET] Grinder Stone Set (3mm Shank) Available with QA-633Q QA-6 QA-632Q QA- QA-2 QA-23Q QA-3 QA-33 QA-35 QB-923 [SET] Grinder Stone Set (6mm Shank) Available with m7 ALL AIR DIE GRINDER QB-9-08-0 QB-92-08-0 Abrasive Cloth Belt QB-908 QB-90 Available with for QB-3 / QB-32 QB-9208 QB-920 Available with for QB-32 / QB-322 / QB-322C ITEM NO. Belt Size For m7 item NO. QB-908 0mm x 330mm #80 0Pcs/ Set QB-90 0mm x 330mm #00 0Pcs/ Set QB-3 QB-32 QB-9208 20mm x 520mm #80 0Pcs/ Set QB-322 QB-322C QB-920 20mm x 520mm #00 0Pcs/ Set QB-32 74 www.mighty-seven.com

QD-932 32T Saw Blade Bi-Metal Material 0 pcs / box Available with QD-22 QD-230 QD-29 SN-268 SN-288 Needle Set SN-268 SN-288 (9 Needle Set) 3 x80 m/m (2 Needle Set) 3 x25 m/m Available with SN-268,SN-20,SN-368 Available with SN-368 SC-4 CHISEL SET Flat Chisel Cutting Chisel Tapered Punch Ripping Chisel Tail Pipe Cutter Available with SC-33C SC-34C SC-332C SC-342C SC-2C SC-22C SC-22C SC-222C SC-45 - Chisel Set / 75mmL / Round SC-425 - Chisel Set / 75mmL / Hex QM-90 Universal repairing Kit for auto Transmission shaft boot Available with QM-25 SC-2A Retainer Available with For SC-2/SC-22 SC-3/SC-34 SERIES SC-2B Quick Change Retainer QD-924 24T Saw Blade Bi-Metal Material 0 pcs / box Available with QD-22 QD-230 QD-29 75

IMPACT SOCKET ACCESSORIES /4'' POWER BIT (PHILLIPS HEAD) ød "OVERALL LENGTH(mm)" 50 70 SIZE ITEM NO. ød(mm) 0 MD050P0A 3 MD050PA 4.5 2 MD050P2A 6 3 MD050P3A 6 MD070PA 4.5 2 MD070P2A 6 3 MD070P3A 6 /4'' POWER BIT (POZIDIV HEAD) ød "OVERALL LENGTH(mm)" 50 70 SIZE ITEM NO. ød(mm) 0 MD050Z0A 3 MD050ZA 4.5 2 MD050Z2A 6 3 MD050Z3A 6 MD070ZA 4.5 2 MD070Z2A 6 3 MD070Z3A 6 /4'' POWER BIT (TORX TAMPER HEAD) ød "OVERALL LENGTH(mm)" 50 70 SIZE ITEM NO. ød(mm) 6 MD050TT06A 3.2 7 MD050TT07A 3.2 8 MD050TT08A 3.2 9 MD050TT09A 3.2 0 MD050TT0A 4 5 MD050TT5A 4 20 MD050TT20A 4.8 25 MD050TT25A 4.8 27 MD050TT27A 6 30 MD050TT30A 6 40 MD050TT40F 6.3 6 MD070TT06A 3.2 7 MD070TT07A 3.2 8 MD070TT08A 3.2 9 MD070TT09A 3.2 0 MD070TT0A 4 5 MD070TT5A 4 20 MD070TT20A 4.8 25 MD070TT25A 4.8 27 MD070TT27A 6 30 MD070TT30A 6 40 MD070TT40F 6.3 45 MD070TT45E 8 50 MD070TT50E 9. 76 www.mighty-seven.com

/4'' POWER BIT (DOUBLE PHILLIPS HEAD) "OVERALL LENGTH(mm)" 65 0 SIZE ITEM NO. MD065PPA 2 MD065P2P2A 3 MD065P3P3A MD00PPA 2 MD00P2P2A 3 MD00P3P3A /4'' POWER BIT (HEX HEAD) /4'' POWER BIT (TORX HEAD) ød A "OVERALL LENGTH(mm)" 50 70 "OVERALL LENGTH(mm)" 50 70 A(mm) ITEM NO..5 MD050H05A 2 MD050H020A 2.5 MD050H025A 3 MD050H030A 4 MD050H040A 5 MD050H050A 6 MD050H060F 7 MD050H070E 8 MD050H080E 0 MD050H00E.5 MD070H05A 2 MD070H020A 2.5 MD070H025A 3 MD070H030A 4 MD070H040A 5 MD070H050A 6 MD070H060F 7 MD070H070E 8 MD070H080E 0 MD070H00E SIZE ITEM NO. ød(mm) 6 MD050T06A 3.2 7 MD050T07A 3.2 8 MD050T08A 3.2 9 MD050T09A 3.2 0 MD050T0A 4 5 MD050T5A 4 20 MD050T20A 4.8 25 MD050T25A 4.8 27 MD050T27A 6 30 MD050T30A 6 40 MD050T40F 7 45 MD050T45E 8 50 MD050T50E 9. 6 MD070T06A 3.2 7 MD070T07A 3.2 8 MD070T08A 3.2 9 MD070T09A 3.2 0 MD070T0A 4 5 MD070T5A 4 20 MD070T20A 4.8 25 MD070T25A 4.8 27 MD070T27A 6 30 MD070T30A 6 40 MD070T40F 7 45 MD070T45E 8 50 MD070T50E 9. 77

IMPACT SOCKET RETAILER PROMOTION ZB-604 USB drive ZC-20 T-shirt ZB-956 LED Pen light SIZE S M L XL 2XL 3XL 4XL 3L 4L 5L LED x 4pcs No. 4 battery x 3pcs included ZB-305 Pen ZB-306 ZB-307 ZB-82 Anti-vibration Glove ZB-84 Half Finger Blade Cut Resistance Glove Palm length : Distance between middle finger to bottom of the palm Palm length : Distance between left side and right side of the palm ZC-202- Baseball Cap Item Description length(cm) wide(cm) M 22 0.5 L 23.5 XL 25.5.5 XXL 26.5 2 ZB-70 Cardcase 78 www.mighty-seven.com

ZC-07 Bag ZF-0 WING PROTECTOR COVER ZF-02 WING PROTECTOR COVER ZC- TOOL Bag 37*24*23cm ZH-04 ZC-303 Stickers ZC-2 TOOL Bag (rubber base) 40*22*30cm ZG-0 Watch ZE-03 79

IMPACT SOCKET ACCESSORIES 80 www.mighty-seven.com

IMPACT SOCKET ACCESSORIES 82 www.mighty-seven.com

User's Manual of Impact Wrench Working environment: Using these tools in any potentially explosive environment is strictly prohibited. It is always recommended that these types of tools must be operated when standing on a solid or firm location. Always use these tools in a well ventilated area. Slipping, stumbling and falling are the major causes of potential serious injury, therefore, a clean and clutter free surface in the working area before operating the tools is strongly recommended. supply and connection requirements: The maximum recommended air pressure during operation must not exceed 90 psi (6.3bar). Higher air pressure may create unsafe operating conditions for the tool and the user. The compressed air should be cooled and have a water filter installed at the outlet end of the compressor. Even with a water filter installed, some water may still condense in the piping or hose and will enter the tool mechanism causing premature damage to the tool. Therefore, it is recommended to install an air filter-lubricator device somewhere between the tool and the compressor. Always use an air compressor of the proper capacity to operate each tool. Clean the hose with a blast of compressed air before connecting the hose to the air tool. This will prevent both moisture and dust inside the hose from entering the tool and causing possible rust or malfunction. Tool Repair Kits M7 provides specialized repairing tools for your after market need Ideal system connection Piping diameters and length requirement: The diameter ΦA required for the inlet pipe is recommended on the specification table. The diameter ΦB required for the branch pipe (from to ) should be 2 times as large as ΦA. ΦB = 2 x ΦA The diameter ΦC required for the primary air supply (from to ) should be 3 times as large as ΦA. ΦC = 3 x ΦA The length for the inlet pipe should be less than 5 feet (4.5m). 83