Val-U-Act Ball Valve Operators. Air-Oil Systems, Inc.

Similar documents
OEM Series Rotary Actuators. Air-Oil Systems, Inc.

OEM Series Actuators: Table of Contents OEM Series OEM 1-1/4 (OC) Series... pg. 2 How to Order: OEM 1-1/4 (OC) Series... pg. 3 imensional ata... pg. 4

Turn-Dex Rotary Vane Actuators

OEM Series Rotary Actuators

Turn-Dex (CD) 1-1/4 Series

C-Series Cylinders: Table of Contents

Z-Series.qxp:TurnAct Cseries.qxp 10/1/09 2:35 PM Page ii Z-Series Cylinders

Multi-Act Integrated Motion Controller

Guided Slides and Guided Rods

Rotary Vane Actuators

Actuator Capabilities

ITT Turn-Act Products

RT Series Roundline Plus Thrusters

SERIES 2200 Replaceable Seat Butterfly Valves

The friction free alternative

SERIES 2100 Resilient Seated Butterfly Valves

MODEL H-2000-E HIGH PRESSURE PROPORTIONING UNIT. Parts Identification

SERIES 7400 THREE PIECE BALL VALVES

Direct solenoid and solenoid pilot operated valves

Injection/Sample Quills

SERIES Way Divert Valve Assembly, 2-inch to 4-inch

SERIES 9000 Double Offset HP Butterfly Valves

TRUCK PRODUCT LINE A DIVISION OF DAKOTA FLUID POWER, INC.

Ball Valves Pressures to 21,000 psi

ANGLgear. right angle drives Inch and Metric Series. The Original Right Angle Gear Drive Made in the U.S.A.

Angular and Parallel Grippers

Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End

All products subject to this warranty must be returned for examination, repair or replacement to:

SERIES 7200 FULL PORT BALL VALVES

Z-Tech Severe Chemical Service Valves We Put Control Where You Need It.

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)

Combined pump and gripper Medium

CUSTOM ADD-ONS FOR ENGLISH UNITS

B SERIES. Bulletin B-2017

SERIES VC. 1/2 to 1-1/2 Carbon Steel V-Port Control Ball Valve

SERIES V. High Performance Segmented Ball Valve

Vacuum Automation 2.1. The future depends on good product choices

MULTIPOSITION AIR CYLINDER

About Grind-All Supply Ltd.

ASM Maxi Poles. Instruction-Parts B Series. For the application of architectural paints and coatings.

Installation and Maintenance Instructions

PVI 1800/PVI Residential/Commercial Grid-Tied Photovoltaic Inverter WARRANTY MANUAL. Subject to Change REV , Solectria Renewables

SERIES 1000 ELECTRIC ACTUATORS

DIGIGAUGE P R E S S U R E D I S P L A Y S Y S T E M I N S T R U C T I O N M A N U A L

SERIES E. V-Port Control Ball Valve

TECHNICAL INSTRUCTIONS SINGLE ACTING POSITIONING RELAY

Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:

- C8. SINGLE AND MANIFOLD TYPE INJECTORS for dispensing fluid lubricants and greases not exceeding Lincoln ventmeter viscosity of 600 psi.

Full Range Pressure Compensating Variable Flow Control

SC HYDRAULIC ENGINEERING CORPORATION

January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell

ITT Industrial Products

SERIES 7100 STANDARD PORT BALL VALVES

HY-SPEC CATALOGUE - HYDRAULIC VALVES. Hydraulic Valves. Visit our website Catalogue

PVI 60KW, PVI 82KW, PVI 95KW

* Screw clearance to allow bolt head to pass through - no counter bores

STC Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices. Air Cylinders

The Product Range. Technical Data

INTRODUCTION INSTALLATION

BC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO

G3PE-Single-phase. Solid State Relays for Heaters

SSR SSR SSR SSR

IMPACT HAMMER MODEL Z-2 & Z-6 PARTS AND OPERATING MANUAL

Dome-Loaded Pressure Reducing BD-Series

FP 106 x PTM - PS

Spring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in.

HR-20P Pneumatically Controlled Pressure Regulator

24G621 Agitator Speed Controller Accessory

Electric cylinders CASM

WARRANTY POLICY. Grid-Tied Photovoltaic Inverters. Revision D. 2014, Solectria Renewables, LLC DOCIN

TPCA Power Clamps Catalog

Tungsten Carbide Rotary Burrs.

Installation and Maintenance Instructions

Power Wheel Model 8 Series B Planetary Gear Drives AuburnGear.com

Page 1 of 8 Mar 20, 2013

FIGURE 310AM, 310AMSW & 311AM 3-PIECE BALL VALVE

MODELS CX10 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL

MODEL DX Pneumatic Diaphragm Actuator

CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER"

Linear Thrusters/PneuMoment

BALL VALVES 4Evergreen Valve

CU6703 Module Installation Guide

brochure PN

Linear Thrusters/PneuMoment

FIGURE 310A & 311A 3-PIECE BALL VALVE

Potentiometer Thrust Plate Kit (50421) Installation & Operator s Instruction Manual

SC series Stopper Cylinders

SC series Stopper Cylinders

DeZURIK G-SERIES MANUAL ACTUATOR USED ON BOS BUTTERFLY VALVES

HIGH VOLTAGE DIGITAL AMMETER

J 6 Se r i e s. Pressure and Vacuum switches. features

HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS INSTRUCTION MANUAL

½ DODGE CUMMINS OEM BYPASS LIFT PUMP KIT Installation Instructions Part #

Electronic lube meter

TKD Series 3-Way Automated Ball Valves Product Data Sheet. Body Material: PVC Size Range: 1/2" through 2"

Electronically Operated Motor for High Efficiency with Speed Control. No Dynamic Shaft Seals for Reliability and Motor Protection

ARS3LS-M110 Pneumatic Nutrunner

Inline & 90 Live Swivels Fax:

Electronic Ball Valve Guide Specifications

RCI 200 Series Actuators

Transcription:

Val-U-Act Ball Valve Operators

Specifications: Class-Act (CL) Valve Operator (/4 /4 ) Double Acting Valve Operator Systems Valve Sizes from /4 to /4 48 in. lbs. to 80 in. lbs. As compared to other rotary devices, ITT Vane s Have: One Moving Part Providing: - ZERO Backlash - No Loss of Motion - Smooth Rotation - Precise Repeatability - Continuous Full Torque Throughout Rotation ITT Patented Urethane Seals for: - Long Cycle Life and Non-Lube Service SPECIFICATIONS Stator/Rotor Seals...Urethane Shaft/Tube Seals...Buna Cylinder...Anodized Alum. End Caps...Anodized Alum. Shaft...Stainless Steel Trim...Mild Steel, Opt l S.S. Bearings...Delrin Brackets...Stainless Steel Couplings...Stainless Steel Miscellaneous Inlets.../8 NPT Filtration Air 25-0 microns Temperature Range -20 F to 80 F. Consult factory for higher temperature. 42 62 Torque Chart (in.lbs.) Torque at 40 PSI 60 PSI 80 PSI 00 PSI 50 PSI 2 5 48 60 90 5 58 80 00 50 Size A B 4.20 2.5 6 4.5 4.2 Valve Size Apollo /4 thru /2.5 Apollo /4. C Capacity per Stroke Cubic Inches 42.66 62 2.52 Weight Pounds 42 0.88 62. Brackets 0.0 www.compactautomation.com Customer Service: 864-64-952 Fax: 864-64-954

How To Order: Class-Act (CL) Valve Operator (/4 /4 ) Part Number Example: 42-5O-BC-V-E00 MODEL END CAPS SHAFT 42 BRACKET & UNIT MATERIAL VALVE COUPLING OPTIONS OPTIONS 5 O BC V E00 2 4 5 6 5 6 Operator - Torque (00 psi) - Rotation 2 4 42 60 in. lbs. - 90º 62 00 in. lbs. - 90º End Caps 5 Pneumatic Clear Anodized O Shaft Double Manual Override Shaft - Body - Trim 0 Stainless Steel, Aluminum, Steel 0 Stainless Steel, Aluminum, Stainless Steel Apollo Bronze Ball Valves (Use 00 if not selecting a valve) Size - Type - Operator 00 No Valve BA /4-2 way - 4 BB /8-2 way - 4 BC /2-2 way - 4 BD /4-2 way - 6 BL /2 - Diverter - 6 Apollo Stainless Steel Ball Valves 2 Valve Size - Type - Operator Size SA /4-2 way - 4 SB /8-2 way - 4 SC /2-2 way - 4 SD /4-2 way - 6 SL /2 - Diverter - 6 Bronze 2-way /4, /8 and /2 are Apollo Series Full Port Ball Valve. The /4 is Apollo Series Standard Port. Diverter Valves are Series. All Bronze valves have Stainless Steel Ball and Stem. 2 Stainless Steel 2-way and diverter valves are Apollo Series 6. XXX 8 Bracket Valve Brand - Valve Size - Material 00 No Bracket V V2 Apollo - /4, /8, /2 Apollo - /4, 000 No Options E00 400 04 Switch Options All Axx Switch Options are Single End Only A00 A02 8 A05 Options Factory Assembled Operator Bracket, Coupling and Valve Adjustable Stroke Control Cap End Teflon Impregnated Hard Anodized Switch Ready - No Switches Switch Package - 2 Reed Switches Switch Package 2-2 Sourcing Switches A08 Switch Package 2-2 Sinking Switches Switch has built in protection for use with ABPLC 2 Switch function can be either sinking or sourcing depending on wiring scheme. Consult Factory for Quick Disconnect Switches www.compactautomation.com Customer Service: 864-64-952 Fax: 864-64-954 2

Specifications: Val-U-Act (VA) Valve Operator (/4 ) Double Acting Valve Operator Systems Valve Sizes from /4 to 40 in. lbs. to 560 in. lbs. As compared to other rotary devices, ITT Vane s Have: One Moving Part Providing: - ZERO Backlash - No Loss of Motion - Smooth Rotation - Precise Repeatability - Continuous Full Torque Throughout Rotation ITT Patented Urethane Seals for: - Long Cycle Life and Non-Lube Service SPECIFICATIONS Stator/Rotor Seals...Urethane Shaft/Tube Seals...Buna Cylinder...Anodized Alum. End Caps...Anodized Alum. Shaft...Mild Steel, Opt l S.S. Trim...Mild Steel, Opt l S.S. Bearings...Delrin Brackets...Stainless Steel Couplings...Stainless Steel Miscellaneous Inlets.../4 NPT Filtration Air 25-0 microns Temperature Range -20 F to 80 F. Consult factory for higher temperature. 82 822 82 Torque Chart (in.lbs.) Torque at 40 PSI 60 PSI 80 PSI 00 PSI 50 PSI 0 05 40 5 265 40 20 280 50 524 280 420 560 00 050 A B Size 2.90 2.5 2 4.40.64.42 6.6 Valve Size Apollo /4 thru /2.69 Apollo /4 thru ".9 Apollo /4 thru 2 2. Apollo 2 /2 thru 2.25 C Capacity per Stroke Cubic Inches 82 2.5 822 5.50 82.00 Weight 82 Pounds 2.5 822. 82 6.0 Brackets 0.2-0.8 Spring Return Add. Weight 822.0 82 9.0 www.compactautomation.com Customer Service: 864-64-952 Fax: 864-64-954

How To Order: Val-U-Act (VA) Valve Operator (/4 ) Part Number Example: 82-5O-BC-V-E00 MODEL END CAPS SHAFT 82 BRACKET & UNIT MATERIAL VALVE COUPLING OPTIONS OPTIONS 5 O BC V E00 2 4 5 6 8 Operator - Torque (00 psi) - Rotation 82 5 in. lbs. - 90º 822 50 in. lbs. - 90º 82 00 in. lbs. - 90º End Caps 5 Pneumatic Clear Anodized Apollo Bronze Ball Valves (Use 00 if not selecting a valve) Size - Type - Operator 00 No Valve BA /4-2 way - BB /8-2 way - BC /2-2 way - BD /4-2 way - BE - 2 way - BF /4-2 way - 2 BG /2-2 way - 2 BH 2-2 way - 2 BJ - 2 way - BL /2 - Diverter - BM /4 - Diverter - BN - Diverter - BO /4 - Diverter - 2 BP /2 - Diverter - 2 BQ 2 - Diverter - 2 Apollo Stainless Steel Ball Valves 2 Valve Size - Type - Operator Size 5 6 2 4 O Shaft Double Manual Override Shaft - Body - Trim 44 Carbon Steel (G&P) - Anod. Alum. - Carb.Steel 0 Stainless Steel - Anod. Alum. - Stainless Steel SA /4-2 way - SB /8-2 way - SC /2-2 way - SD /4-2 way - SE - 2 way - SF /4-2 way - 2 SG /2-2 way - 2 SH 2-2 way - 2 SI 2 /2-2 way - SJ - 2 way - SL /2 - Diverter - SM /4 - Diverter - SN - Diverter - SP /2 - Diverter - 2 SQ 2 - Diverter - 2 Bronze 2-way /4, /8 and /2 are Apollo Series Full Port Ball Valve. /4 thru are Apollo Series Standard Port. Diverter Valves are Series. All Bronze valves have Stainless Steel Ball and Stem. 2 Stainless Steel 2-way and diverter valves are Apollo Series 6. XXX Bracket Valve Brand - Valve Size - Material 00 No Bracket V V2 V V4 Apollo - /4, /8, /2 Apollo - /4, Apollo - /4, /2, 2 Apollo - 2 /2, 000 No Options E00 400 04 Switch Options All Axx Switch Options are Single End Only A00 8 A02 A05 A08 Options Factory Assembled Operator Bracket, Coupling and Valve Adjustable Stroke Control Cap End Teflon Impregnated Hardened Anodized Switch Ready - No Switches Switch Package - 2 Reed Switches Switch Package 2-2 Sourcing Switches Switch Package 2-2 Sinking Switches Switch has built in protection for use with ABPLC 2 Switch function can be either sinking or sourcing depending on wiring scheme. Consult Factory for Quick Disconnect Switches www.compactautomation.com Customer Service: 864-64-952 Fax: 864-64-954 4

How To Order: Val-U-Act Spring Return (VS) Valve Operator (/4 - ) Part Number Example: 822-5A-BC-V-E00 MODEL END CAPS SHAFT 822 BRACKET & UNIT MATERIAL VALVE COUPLING OPTIONS 5 A BC V E00 2 4 5 6 Operator - Torque (00 psi) - Rotation 5 6 822 50 in. lbs. - 90º 82 00 in. lbs. - 90º 2 4 End Caps 5 Pneumatic Clear Anodized A B Shaft Spring Closes Valve Spring Opens Valve Shaft - Body - Trim 44 CarbonSteel (G&P) - Anod. Alum. - Carb.Steel 0 Stainless Steel - Anod. Alum. - Stainless Steel Spring Return Description: Spring Return operators are formed bolting a spring return unit to a double acting Val-U-Act operator. The return movement is effected by a clock-type spring which is pretensioned to about half the operator torque. The amount of pretension is large, compared to the rotation and therefore the torque does not vary more than 20% over the rotation. Spring returns are factory-installed and adjusted. Specifications: Spring Casing - pressure diecast to BS004 zinc or aluminum alloy LM25 Finish - Epoxy stove enamel Spring - Clock type, spring steel Apollo Bronze Ball Valves (Use 00 if not selecting a valve) Size - Type - Operator 00 No Valve BA /4-2 way - 2 BB /8-2 way - 2 BC /2-2 way - 2 BD /4-2 way - 2 BE - 2 way - 2 BF /4-2 way - BG /2-2 way - BH 2-2 way - BL /2 - Diverter - 2 BM /4 - Diverter - 2 BN - Diverter - 2 BO /4 - Diverter - BP /2 - Diverter - BQ 2 - Diverter - Apollo Stainless Steel Ball Valves 2 Valve Size - Type - Operator Size SA /4-2 way - 2 SB /8-2 way - 2 SC /2-2 way - 2 SD /4-2 way - 2 SE - 2 way - 2 SF /4-2 way - SG /2-2 way - SH 2-2 way - SL /2 - Diverter - 2 SM /4 - Diverter - 2 SN - Diverter - 2 SP /2 - Diverter - SQ 2 - Diverter - Bronze 2-way /4, /8 and /2 are Apollo Series Full Port Ball Valve. /4 thru are Apollo Series Standard Port. Diverter Valves are Series. All Bronze valves have Stainless Steel Ball and Stem. 2 Stainless Steel 2-way and diverter valves are Apollo Series 6. Bracket Valve Brand - Valve Size - Material 00 No Bracket Apollo - /4, /8, /2 V V2 V V4 Apollo - /4, Apollo - /4, /2, 2 Apollo - 2 /2, 000 No Options E00 400 04 Options Factory Assembled Operator Bracket, Coupling and Valve Adjustable Stroke Control Cap End, Pos. 5 Teflon Impregnated Hard Anodized Note: Operator Only ø"a" "B" "C" "E" "D" Ordering: The spring return is available with the optional Adjustable Stroke Control but not with the Hall Effect or AC/DC Reed Switches. Operator Size A B C D E 2 4.22.5.500 2.25.8 & 4 5.9.625.50 4.06.2 5 www.compactautomation.com Customer Service: 864-64-952 Fax: 864-64-954

Special Conditions and Limited Warranty Determination of the suitability of any information or product for the application contemplated by any user or the manner of that use is the sole responsibility of the user. Compact Automation Products, LLC reserves the right to improve or change designs without notice. All orders are subject to acceptance by the factory sales department. Compact Automation Products, LLC agrees to repair or replace to the original purchaser any standard parts or products for a period of 2 months from date of shipment which Compact Automation Products, LLC determines upon inspection to be defective in workmanship or material. Wear components including but not limited to seals and bearings are excluded from this warranty. Under no circumstance may merchandise be returned without written authorization from the factory. This warranty is void in the event the product has been tampered with, altered, or serviced by unauthorized personnel. Compact Automation Products, LLC's total responsibility for any claims, damages, losses or liabilities related to the product covered thereunder shall not exceed the purchase price of such product. In no event shall Compact Automation Products, LLC be liable for any special, indirect, incidental or consequential damages of any character, including but not limited to loss of use of productive facilities or equipment, lost profit, property damage, transportation, installation or removal or lost production whether suffered by purchaser or third party. Compact Automation Products, LLC disclaims all liability for any and all cost, claims demands, charges, expenses, and other damages, either direct or indirect, incident to all property damage arising out of any cause of action based on strict liability. This warranty gives you specific legal rights and you may have other rights, which vary from state to state. www.compactautomation.com Customer Service: 864-64-952 Fax: 864-64-954 6

Compact Automation Products 05 Commerce Way Westminster, SC 2969 p. 864 64 952 f. 864 64 954 www.itt.com www.compactautomation.com CAP069 2.5M 09/08