Panasonic G-series. Small ac geared motors & brake motors. ideas in motion

Small ac geared motors & brake motors ideas in motion

geared motors 6W to 90W 2 Panasonic, one of the largest motor manufacturers in the world, have designed and developed the G-series range of geared motors. Covering powers from 6 to 90W, these units are now established in a worldwide market with a reputation for quality, value and long life. Sealed for life, grease filled gearboxes offer a long and maintenance free service life Helical spur gearboxes ensure quiet, efficient running Speed range from 500r/min down to 0.7r/min Fixed speed and variable speed models available Universal mounting Proven quality and reliability Other models available Geared motors for 110V and 60Hz supply IP65 protection on 1 and 3 phase geared motors 25 to 60W IP67 protection for severe washdown environments B1-series with integrated drive and IP65 enclosure B3-series with integrated drive, IP65 enclosure and positioning capabilities Construction The Panasonic G-series motors are designed for 1 or 3 phase supply. The 6-40W models are all self cooled and the 60 and 90W units are supplied with a cooling fan. Gearboxes use a combination of helical and spur gears for high speed efficient running and are grease lubricated. Standard ratios of 3:1 to 200:1. However, where higher ratios and lower speeds are required, an intermediate 10:1 decimal gearbox is available. Range overview 1 phase Geared motors suitable for fixed speed running in a power range 6 to 90W. Quick reversing Single phase input geared motors with a builtin constant friction brake that reduces overrun. 3 phase Geared motors ranging from 25-90W. The 230V versions suit variable speed running with an inverter. The 400V versions are designed to be connected directly to 3 phase supplies. Brake motor Geared motors with an integrated spring applied brake for 1 or 3 phase 230V supply. Micro-inverter A compact digital inverter offering 30:1 speed range on all 230V 3 phase motors. Alternatively, the Lenze smd inverter is available for applications that require greater functionality. Applications Conveyors Food machinery Packaging Pumps Labelling Test equipment

geared motors Page Index 1 phase standard induction & quick reversible motors 6-19 3 phase induction motors 20-29 1 phase & 3 phase brake motors 30-39 Micro inverter 40-43 Feet options 44-45 Motor data 46 Part numbers 47-48 Gearbox data & filtting instructions 49 Service factors To maintain the life of the geared motor, a service factor must be selected which is dependent upon type of load and duty. From the below table, examples are given of typical applications. For example, under constant load a service factor of 1.0 should be used. 3 Type of load Constant Application Belt conveyor, Film winding One-way operation Service factor 5 h/day 8 h/day 24 h/day 0.8 1.0 1.5 Light impact Start/Stop/Cam operation 1.2 1.5 2.0 Medium impact Heavy impact Instant Reverse operation with Reversible motor Instant stall operation with brake pack Repetition of medium impact Instant stall of the motor at vibrating material 1.5 2.0 2.5 2.0 ~ 2.5 2.5 ~ 3.0 3.0 ~ 3.5 Actual speeds The actual output speeds under rated torque is typically 10-20% less than the nominal speed. Motor speed torque curves give the motor full load rated speed and indication of how speed varies with load. Nominal speeds are based on a motor nominal speed of 1500 r/min. Brake motors Panasonic G-series brake motors feature a built-in spring applied electromagnetic brake. This reduces stopping times and gives a static holding torque. Motor overrun is normally 2-4 revolutions and the brake is rated for 6 operations per minute. See pages 30-39. Quick reversible motors When you turn off the power to the Reversible motor, braking torque will be generated due to a built-in constant friction braking system. The revolutions the motor makes until it completely stops are described as overrun. A holding load torque reduces and a driving load torque increases the overrun. The overrun values in the table are for induction purposes only and do not include gearbox ratio or load inertia. See pages 6-19. Output Braking torque Overrun (W) (Ncm) (revolution) 6 0.59 5.0 15 1.27 4.5 25 1.47 5.5 40 3.92 6.0 60 3.92 6.0 90 3.92 6.0

fixed speed solutions For constant speed applications, Panasonic offer a range of standard induction and and brake motors for both single and three phase voltage supplies plus quick reversible motors for single phase supplies. 1 phase standard induction motors (pages 6-19) continuous rating S1 thermally or impedance protected class E insulation All the induction motors in the G-Series range are highly efficient and quiet in operation. The same high quality design and basic construction is used throughout the range. All motors are 4 pole with a nominal speed of 1500 r/min at 50 Hz. 4 1 phase quick reversible motors (pages 6-19) built-in constant friction braking system reduced overrun and fast stopping ideal for quick reversing or stop/start applications A friction plate attached to the end of the rotor is constantly under friction via four cylindrical brake pads and springs. The resulting braking torque is continuously applied to the motor even during motor running. When power is removed, this friction results in faster stopping of the motor. 3 phase induction motors (pages 20-29) continuous rating S1 thermally protected class E insulation Three phase induction motors deliver improved torque performance over single phase models. The 230V versions suit variable speed running with the Panasonic Micro-Inverter. The 400V versions are designed to be connected directly to 3 phase supplies. 1 & 3 phase brake motors (pages 30-39) spring applied electromagnetic brake built-in rectifier gives static holding torque with power off The brake releases automatically when the motor is powered, leaving no residual torque. When the motor is switched off the brake re-engages. Motor overun is typically 2-4 revolutions and the brake is rated for six operations per minute.

variable speed solutions If variable speed is required the 230V 3 phase geared motors can be used with the Panasonic Micro-inverter. This combination offers excellent speed/torque characteristics and good dynamic motor performance. If greater functionality is required, the Lenze smd inverter offers further options including its unique EPM memory chip. Micro-Inverter (pages 40-43) The Panasonic Micro-Inverter can be used with any 3 phase motor, rated for 230V operation. There are two versions available: one suitable for the 25 and 40W motors and another for the 60 and 90W motors. Features include built-in or external speed potentiometer, dynamic braking and acceleration/deceleration ramp. Excellent speed/torque characteristics Large speed range Suits 3 phase 230V motors; 25-90W Simple set up and operation 5 smd inverter Designed for general purpose applications, Lenze smd inverters offer compact design, simple installation and fast set-up. Integrated RFI filter Innovative EPM plug-in memory chip Compliant CE, UL, cul Quick commissioning, integrated keypad and pre-configured settings Options of DIN rail mounting, dc braking and remote keypad The smd model ESMD251X2SAF has a rated output power of 0.25kW and suits any G-series geared motors rated for 230V 3 phase input. This inverter input is 180-264V, 48-62Hz, Dimensions are 93 wide x 146 high x 83 deep. Accessories The smd drive features the innovative EPM memory chip which contains the entire drive and motor configuration. The EPM can easily be removed and replaced for fast and efficent program changes, saving time and money. Features include up to 3 pre-set jog speeds, voltage boost, dc injection braking, adjustable chopper frequency between 4 and 10Hz, digital and analog inputs and relay output. Options DIN rail mounting kit ESMD093DR Pack of EPM memory chips ESMD01BP EPM programmer, battery powered ESMD01EP For more information see www.lenze.co.uk Products/Frequency inverters. under The EPM programmer is battery powered and will copy an EPM chip in less than 2 seconds. You can also copy from a file to an EPM, and edit/create smd programs. A RS232 port for PC operation is included.

6W 1 phase Standard & Quick Reversible 6 Standard induction motors suit fixed speed applications. Quick reversing motors have a built-in braking systemfor reduced overrun and fast reversing. Rated 230V ± 10% and 50 Hz Continuous duty S1 Enclosure IP22 (cable downwards) Class E insulation Supplied with 0.6µF run capacitor Thermal protection by impedance current limiting approved, UL on request M6GA gearbox Standard Induction Motor Quick Reversible Motor Model Number : M6IA6G4GE Model Number : M6RA6G4GE Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @230V number L kg 500 M6GA 3B 408 0.11 PAN GS 006 IGE 500.0 A L1 408 0.11 PAN GS 006 RGE 500.0 A L1 133 300 M6GA 5B 245 0.18 PAN GS 006 IGE 300.0 A L1 245 0.18 PAN GS 006 RGE 300.0 A L1 133 200 M6GA 7.5B 163 0.27 PAN GS 006 IGE 200.0 A L1 163 0.27 PAN GS 006 RGE 200.0 A L1 133 150 M6GA 10B 123 0.33 PAN GS 006 IGE 150.0 A L1 123 0.33 PAN GS 006 RGE 150.0 A L1 133 100 M6GA 15B 82 0.5 PAN GS 006 IGE 100.0 A L1 82 0.5 PAN GS 006 RGE 100.0 A L1 133 75 M6GA 20B 61 0.66 PAN GS 006 IGE 075.0 A L1 61 0.66 PAN GS 006 RGE 075.0 A L1 142 60 M6GA 25B 49 0.83 PAN GS 006 IGE 060.0 A L1 49 0.83 PAN GS 006 RGE 060.0 A L1 142 50 M6GA 30B 41 1.0 PAN GS 006 IGE 050.0 A L1 41 1.0 PAN GS 006 RGE 050.0 A L1 142 1.0 30 M6GA 50B 25 1.7 PAN GS 006 IGE 030.0 A L1 25 1.7 PAN GS 006 RGE 030.0 A L1 142 20 M6GA 75B* 16.3 2.3 PAN GS 006 IGE 020.0 A L1 16.3 2.3 PAN GS 006 RGE 020.0 A L1 142 15 M6GA 100B* 12.3 2.5 PAN GS 006 IGE 015.0 A L1 12.3 2.5 PAN GS 006 RGE 015.0 A L1 142 12.5 M6GA 120B* 10.2 2.5 PAN GS 006 IGE 012.5 A L1 10.2 2.5 PAN GS 006 RGE 012.5 A L1 142 10 M6GA 150B* 8.2 2.5 PAN GS 006 IGE 010.0 A L1 8.2 2.5 PAN GS 006 RGE 010.0 A L1 142 8.3 M6GA 180B* 6.8 2.5 PAN GS 006 IGE 008.3 A L1 6.8 2.5 PAN GS 006 RGE 008.3 A L1 142 M6GA 10XM* Additional gearbox M6GA 10XM must be used for speeds of 7.5 r/min and below 7.5 M6GA 20B* 6.1 2.5 PAN GS 006 IGE 007.5 A L1 6.1 2.5 PAN GS 006 RGE 006.0 A L1 165 6.0 M6GA 25B* 4.9 2.5 PAN GS 006 IGE 006.0 A L1 4.9 2.5 PAN GS 006 RGE 006.0 A L1 165 5.0 M6GA 30B* 4.1 2.5 PAN GS 006 IGE 005.0 A L1 4.1 2.5 PAN GS 006 RGE 005.0 A L1 165 3.0 M6GA 50B* 2.5 2.5 PAN GS 006 IGE 003.0 A L1 2.5 2.5 PAN GS 006 RGE 003.0 A L1 165 2.0 M6GA 75B* 1.6 2.5 PAN GS 006 IGE 002.0 A L1 1.6 2.5 PAN GS 006 RGE 002.0 A L1 165 1.2 1.5 M6GA 100B* 1.2 2.5 PAN GS 006 IGE 001.5 A L1 1.2 2.5 PAN GS 006 RGE 001.5 A L1 165 1.3 M6GA 120B* 1.0 2.5 PAN GS 006 IGE 001.3 A L1 1.0 2.5 PAN GS 006 RGE 001.3 A L1 165 1.0 M6GA 150B* 0.8 2.5 PAN GS 006 IGE 001.0 A L1 0.8 2.5 PAN GS 006 RGE 001.0 A L1 165 0.8 M6GA 180B* 0.7 2.5 PAN GS 006 IGE 000.8 A L1 0.7 2.5 PAN GS 006 RGE 000.8 A L1 165 * torque limiter recommended 1 signifies standard leadwire position 1 as shown. For further mounting positions please see page 48.

6W 1 phase 32 CABLE 300mm 26 4xM4 ON 70 PCD 12 ø62 10 CTRS 7 ø8 h7 ø25 7 (49.5) 75 60 L Standard induction Quick reversible 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 0 500 1000 1500 2000 Speed (r/min) Motor speed-torque curve 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 230 V 230 V Rated current 0.08 A Rated current 0.10 A Starting current 0.12 A Starting current 0.12 A Input power 19 W Input power 22 W Rated speed 1225 r/min Rated speed 1225 r/min

15W 1 phase Standard & Quick Reversible 8 Standard induction motors suit fixed speed applications. Quick reversing motors have a built-in braking system for reduced overrun and fast reversing. Rated 230V ± 10% and 50 Hz Continuous duty S1 Enclosure IP22 (cable downwards) Class E insulation Supplied with run capacitor (standard 1.2µF, 1.0µF for Quick Reversible) Integrated thermal protection switch (For external connection) approved, UL on request M7GA gearbox Standard Induction Motor Quick Reversible Motor Model Number : M7IA15G4GE Model Number : M7RA15G4GE Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @230V number L kg 500 M7GA 3B 408 0.27 PAN GS 015 IGE 500.0 A L1 408 0.27 PAN GS 015 RGE 500.0 A L1 144 300 M7GA 5B 245 0.45 PAN GS 015 IGE 300.0 A L1 245 0.45 PAN GS 015 RGE 300.0 A L1 144 200 M7GA 7.5B 163 0.67 PAN GS 015 IGE 200.0 A L1 163 0.67 PAN GS 015 RGE 200.0 A L1 144 150 M7GA 10B 123 0.83 PAN GS 015 IGE 150.0 A L1 123 0.83 PAN GS 015 RGE 150.0 A L1 144 100 M7GA 15B 82 1.24 PAN GS 015 IGE 100.0 A L1 82 1.24 PAN GS 015 RGE 100.0 A L1 144 75 M7GA 20B 61 1.65 PAN GS 015 IGE 075.0 A L1 61 1.65 PAN GS 015 RGE 075.0 A L1 154 60 M7GA 25B 49 2.1 PAN GS 015 IGE 060.0 A L1 49 2.1 PAN GS 015 RGE 060.0 A L1 154 50 M7GA 30B 41 2.5 PAN GS 015 IGE 050.0 A L1 41 2.5 PAN GS 015 RGE 050.0 A L1 154 1.6 30 M7GA 50B 25 4.1 PAN GS 015 IGE 030.0 A L1 25 4.1 PAN GS 015 RGE 030.0 A L1 154 20 M7GA 75B* 16.3 4.9 PAN GS 015 IGE 020.0 A L1 16.3 4.9 PAN GS 015 RGE 020.0 A L1 154 15 M7GA 100B* 12.3 4.9 PAN GS 015 IGE 015.0 A L1 12.3 4.9 PAN GS 015 RGE 015.0 A L1 154 12.5 M7GA 120B* 10.2 4.9 PAN GS 015 IGE 012.5 A L1 10.2 4.9 PAN GS 015 RGE 012.5 A L1 154 10 M7GA 150B* 8.2 4.9 PAN GS 015 IGE 010.0 A L1 8.2 4.9 PAN GS 015 RGE 010.0 A L1 154 8.3 M7GA 180B* 6.8 4.9 PAN GS 015 IGE 008.3 A L1 6.8 4.9 PAN GS 015 RGE 008.3 A L1 154 M7GA 10XM* Additional gearbox M7GA 10XM must be used for speeds of 7.5 r/min and below 7.5 M7GA 20B* 6.1 4.9 PAN GS 015 IGE 007.5 A L1 6.1 4.9 PAN GS 015 RGE 006.0 A L1 180 6.0 M7GA 25B* 4.9 4.9 PAN GS 015 IGE 006.0 A L1 4.9 4.9 PAN GS 015 RGE 006.0 A L1 180 5.0 M7GA 30B* 4.1 4.9 PAN GS 015 IGE 005.0 A L1 4.1 4.9 PAN GS 015 RGE 005.0 A L1 180 3.0 M7GA 50B* 2.5 4.9 PAN GS 015 IGE 003.0 A L1 2.5 4.9 PAN GS 015 RGE 003.0 A L1 180 2.0 M7GA 75B* 1.6 4.9 PAN GS 015 IGE 002.0 A L1 1.6 4.9 PAN GS 015 RGE 002.0 A L1 180 2.0 1.5 M7GA 100B* 1.2 4.9 PAN GS 015 IGE 001.5 A L1 1.2 4.9 PAN GS 015 RGE 001.5 A L1 180 1.3 M7GA 120B* 1.0 4.9 PAN GS 015 IGE 001.3 A L1 1.0 4.9 PAN GS 015 RGE 001.3 A L1 180 1.0 M7GA 150B* 0.8 4.9 PAN GS 015 IGE 001.0 A L1 0.8 4.9 PAN GS 015 RGE 001.0 A L1 180 0.8 M7GA 180B* 0.7 4.9 PAN GS 015 IGE 000.8 A L1 0.7 4.9 PAN GS 015 RGE 000.8 A L1 180 * torque limiter recommended 1 signifies standard leadwire position 1 as shown. For further mounting positions please see page 48.

15W 1 phase 32 CABLE 300mm 27 25 15 CTRS 4xM5 ON 82 PCD ø72 4 ø30 ø10 h7 9 11.5 80 (58) L 70 Standard induction Quick reversible 0.15 0.125 0.1 0.15 0.125 0.10 0.075 0.05 0.075 0.05 0.025 0.025 0 0 250 500 750 1000 1250 1500 1750 2000 Speed (r/min) Motor speed-torque curve 0 0 250 500 750 1000 1250 1500 1750 2000 Speed (r/min.) Motor speed-torque curve 230 V 230 V Rated current 0.13 A Rated current 0.17 A Starting current 0.23 A Starting current 0.24 A Input power 34 W Input power 38 W Rated speed 1225 r/min Rated speed 1225 r/min

25W 1 phase Standard & Quick Reversible Standard induction motors suit fixed speed applications. Quick reversing motors have a built-in braking system for reduced overrun and fast reversing. M8GA gearbox 10 Rated 230V ± 10% and 50 Hz Continuous duty S1 Enclosure IP54 Class E insulation Supplied with run capacitor (1.5µF for standard, 1.8µF for Quick Reversible) Integrated thermal protection switch (For external connection) approved, UL on request Standard Induction Motor Quick Reversible Motor Model Number : M8IA25G4GE Model Number : M8RA25G4GE Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @230V number L kg 500 M8GA 3B 408 0.44 PAN GS 025 IGE 500.0 A K1 417 0.46 PAN GS 025 RGE 500.0 A K1 149 300 M8GA 5B 245 0.73 PAN GS 025 IGE 300.0 A K1 250 0.77 PAN GS 025 RGE 300.0 A K1 149 200 M8GA 7.5B 163 1.1 PAN GS 025 IGE 200.0 A K1 167 1.15 PAN GS 025 RGE 200.0 A K1 149 150 M8GA 10B 123 1.35 PAN GS 025 IGE 150.0 A K1 125 1.5 PAN GS 025 RGE 150.0 A K1 149 100 M8GA 15B 82 2.0 PAN GS 025 IGE 100.0 A K1 83 2.1 PAN GS 025 RGE 100.0 A K1 149 75 M8GA 20B 61 2.7 PAN GS 025 IGE 075.0 A K1 63 2.9 PAN GS 025 RGE 075.0 A K1 159 60 M8GA 25B 49 3.4 PAN GS 025 IGE 060.0 A K1 50 3.6 PAN GS 025 RGE 060.0 A K1 159 50 M8GA 30B 41 4.1 PAN GS 025 IGE 050.0 A K1 42 4.3 PAN GS 025 RGE 050.0 A K1 159 2.5 30 M8GA 50B 25 6.8 PAN GS 025 IGE 030.0 A K1 25 7.1 PAN GS 025 RGE 030.0 A K1 159 20 M8GA 75B* 16.3 7.8 PAN GS 025 IGE 020.0 A K1 16.7 7.8 PAN GS 025 RGE 020.0 A K1 159 15 M8GA 100B* 12.3 7.8 PAN GS 025 IGE 015.0 A K1 12.5 7.8 PAN GS 025 RGE 015.0 A K1 159 12.5 M8GA 120B* 10.2 7.8 PAN GS 025 IGE 012.5 A K1 10.4 7.8 PAN GS 025 RGE 012.5 A K1 159 10 M8GA 150B* 8.2 7.8 PAN GS 025 IGE 010.0 A K1 8.3 7.8 PAN GS 025 RGE 010.0 A K1 159 8.3 M8GA 180B* 6.8 7.8 PAN GS 025 IGE 008.3 A K1 6.9 7.8 PAN GS 025 RGE 008.3 A K1 159 M8GA 10XM* Additional gearbox M8GA 10XM must be used for speeds of 7.5 r/min and below 7.5 M8GA 20B* 6.1 7.8 PAN GS 025 IGE 007.5 A K1 6.3 7.8 PAN GS 025 RGE 006.0 A K1 186 6.0 M8GA 25B* 4.9 7.8 PAN GS 025 IGE 006.0 A K1 5 7.8 PAN GS 025 RGE 006.0 A K1 186 5.0 M8GA 30B* 4.1 7.8 PAN GS 025 IGE 005.0 A K1 4.2 7.8 PAN GS 025 RGE 005.0 A K1 186 3.0 M8GA 50B* 2.5 7.8 PAN GS 025 IGE 003.0 A K1 2.5 7.8 PAN GS 025 RGE 003.0 A K1 186 2.0 M8GA 75B* 1.6 7.8 PAN GS 025 IGE 002.0 A K1 1.7 7.8 PAN GS 025 RGE 002.0 A K1 186 2.9 1.5 M8GA 100B* 1.2 7.8 PAN GS 025 IGE 001.5 A K1 1.3 7.8 PAN GS 025 RGE 001.5 A K1 186 1.3 M8GA 120B* 1.0 7.8 PAN GS 025 IGE 001.3 A K1 1.0 7.8 PAN GS 025 RGE 001.3 A K1 186 1.0 M8GA 150B* 0.8 7.8 PAN GS 025 IGE 001.0 A K1 0.8 7.8 PAN GS 025 RGE 001.0 A K1 186 0.8 M8GA 180B* 0.7 7.8 PAN GS 025 IGE 000.8 A K1 0.7 7.8 PAN GS 025 RGE 000.8 A K1 186 * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

25W 1 phase 67 11.5 32 1 26 75 30 MAX 25 ø30 15 CTRS ø82 4 44 10ø h7 11 (66.5) 4xM5 ON 94 PCD 85 80 L Standard induction Quick reversible 3.0 2.5 2.0 1.5 1.0 0.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve Rated current Starting current Input power Rated speed 230 V 0.23 A 0.37 A 50 W 1225 r/min Rated current Starting current Input power Rated speed 230 V 0.25 A 0.43 A 57 W 1250 r/min

40W 1 phase Standard & Quick Reversible 12 Standard induction motors suit fixed speed applications. Quick reversing motors have a built-in braking system for reduced overrun and fast reversing. Rated 230V ± 10% and 50 Hz Standard induction motor rated continuous duty S1 Quick reversing motor rated intermittent duty S2 Enclosure IP54 Class E insulation Supplied with run capacitor (Standard induction 2.5 µf, quick reversible 3.0µF) Integrated thermal protection switch (For external connection) approved, UL on request M9GA gearbox Standard Induction Motor Quick Reversible Motor Model Number : M9IA40K4GE Model Number : M9RA40K4GE Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @230V number L kg 500 M9GA 3B 400 0.75 PAN GS 040 IGE 500.0 A K1 392 0.8 PAN GS 040 RGE 500.0 A K1 179 300 M9GA 5B 240 1.26 PAN GS 040 IGE 300.0 A K1 235 1.3 PAN GS 040 RGE 300.0 A K1 179 200 M9GA 7.5B 160 1.9 PAN GS 040 IGE 200.0 A K1 157 2.0 PAN GS 040 RGE 200.0 A K1 179 150 M9GA 10B 120 2.3 PAN GS 040 IGE 150.0 A K1 118 2.5 PAN GS 040 RGE 150.0 A K1 179 100 M9GA 15B 80 3.5 PAN GS 040 IGE 100.0 A K1 78 3.7 PAN GS 040 RGE 100.0 A K1 179 75 M9GA 20B 60 4.7 PAN GS 040 IGE 075.0 A K1 59 5.0 PAN GS 040 RGE 075.0 A K1 197 60 M9GA 25B 48 5.8 PAN GS 040 IGE 060.0 A K1 47 6.2 PAN GS 040 RGE 060.0 A K1 197 50 M9GA 30B 40 7.0 PAN GS 040 IGE 050.0 A K1 39 7.4 PAN GS 040 RGE 050.0 A K1 197 4.0 30 M9GA 50B 24 9.8 PAN GS 040 IGE 030.0 A K1 24 9.8 PAN GS 040 RGE 030.0 A K1 197 20 M9GA 75B* 16 9.8 PAN GS 040 IGE 020.0 A K1 16 9.8 PAN GS 040 RGE 020.0 A K1 197 15 M9GA 100B* 12 9.8 PAN GS 040 IGE 015.0 A K1 12 9.8 PAN GS 040 RGE 015.0 A K1 197 12.5 M9GA 120B* 10 9.8 PAN GS 040 IGE 012.5 A K1 12 9.8 PAN GS 040 RGE 012.5 A K1 197 10 M9GA 150B* 8 9.8 PAN GS 040 IGE 010.0 A K1 9.8 9.8 PAN GS 040 RGE 010.0 A K1 197 8.3 M9GA 180B* 6.7 9.8 PAN GS 040 IGE 008.3 A K1 6.5 9.8 PAN GS 040 RGE 008.3 A K1 197 M9GA 10XM* Additional gearbox M9GA 10XM must be used for speeds of 7.5 r/min and below 7.5 M9GA 20B* 6.0 9.8 PAN GS 040 IGE 007.5 A K1 5.9 9.8 PAN GS 040 RGE 006.0 A K1 229 6.0 M9GA 25B* 4.8 9.8 PAN GS 040 IGE 006.0 A K1 4.7 9.8 PAN GS 040 RGE 006.0 A K1 229 5.0 M9GA 30B* 4.0 9.8 PAN GS 040 IGE 005.0 A K1 3.9 9.8 PAN GS 040 RGE 005.0 A K1 229 3.0 M9GA 50B* 2.4 9.8 PAN GS 040 IGE 003.0 A K1 2.4 9.8 PAN GS 040 RGE 003.0 A K1 229 2.0 M9GA 75B* 1.6 9.8 PAN GS 040 IGE 002.0 A K1 1.6 9.8 PAN GS 040 RGE 002.0 A K1 229 4.7 1.5 M9GA 100B* 1.2 9.8 PAN GS 040 IGE 001.5 A K1 1.2 9.8 PAN GS 040 RGE 001.5 A K1 229 1.3 M9GA 120B* 1.0 9.8 PAN GS 040 IGE 001.3 A K1 1.0 9.8 PAN GS 040 RGE 001.3 A K1 229 1.0 M9GA 150B* 0.8 9.8 PAN GS 040 IGE 001.0 A K1 0.8 9.8 PAN GS 040 RGE 001.0 A K1 229 0.8 M9GA 180B* 0.7 9.8 PAN GS 040 IGE 000.8 A K1 0.7 9.8 PAN GS 040 RGE 000.8 A K1 229 * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

40W 1 phase 67 13.5 32 27 25 1 75 30 MAX ø92 18 CTRS 4 44 ø36 ø12 h7 13 (73.5) 4xM6 ON 104 PCD 105 90 L Standard induction Quick reversible 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.7 0.6 0.5 0.4 0.3 0.2 0.1 duty S2 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 230 V 230 V Rated current 0.36 A Rated current 0.41 A Starting current 0.60 A Starting current 0.63 A Input power 79 W Input power 94 W Rated speed 1200 r/min Rated speed 1175 r/min

60W 1 phase Standard & Quick Reversible Standard induction motors suit fixed speed applications. Quick reversing motors have a built-in braking system for reduced overrun and fast reversing. Both models are available with flanged or square gearboxes. Flanged M9GC gearbox 14 Rated 230V ± 10% and 50 Hz Continuous duty S1 Enclosure IP54 Class E insulation Supplied with run capacitor (Standard 4.0µF, QR 5.0µF) Integrated thermal protection switch (For external connection) approved, UL on request Square M9GD gearbox Ordering specification and example Replace the letter # from the assembly number with a C for flanged gearbox or D for square gearbox as required. Examples: 100 r/min flanged with standard induction motor PAN GS 060 IGE 100.0 C K1 5 r/min square with quick reversible motor PAN GS 060 RGE 005.0 D K1 See page 48 for terminal box positions and feet. Standard Induction Motor Quick Reversible Motor Model Number : M9IC60GK4GE Model Number : M9RC60GK4GE Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @230V number L kg 500 M9G# 3B 408 1.1 PAN GS 060 IGE 500.0 # K1 433 1.1 PAN GS 060 RGE 500.0 # K1 225 300 M9G# 5B 245 1.9 PAN GS 060 IGE 300.0 # K1 260 1.8 PAN GS 060 RGE 300.0 # K1 225 200 M9G# 7.5B 163 2.9 PAN GS 060 IGE 200.0 # K1 173 2.7 PAN GS 060 RGE 200.0 # K1 225 150 M9G# 10B 123 3.5 PAN GS 060 IGE 150.0 # K1 130 3.35 PAN GS 060 RGE 150.0 # K1 225 100 M9G# 15B 82 5.3 PAN GS 060 IGE 100.0 # K1 87 5 PAN GS 060 RGE 100.0 # K1 225 75 M9G# 20B 61 6.6 PAN GS 060 IGE 075.0 # K1 65 6.2 PAN GS 060 RGE 075.0 # K1 225 60 M9G# 25B 49 8.2 PAN GS 060 IGE 060.0 # K1 52 7.7 PAN GS 060 RGE 060.0 # K1 225 50 M9G# 30B 41 9.9 PAN GS 060 IGE 050.0 # K1 43 9.2 PAN GS 060 RGE 050.0 # K1 225 4.5 30 M9G# 50B 25 16.5 PAN GS 060 IGE 030.0 # K1 26 15.4 PAN GS 060 RGE 030.0 # K1 225 20 M9G# 75B* 16.3 19.6 PAN GS 060 IGE 020.0 # K1 17.3 19.6 PAN GS 060 RGE 020.0 # K1 225 15 M9G# 100B* 12.3 19.6 PAN GS 060 IGE 015.0 # K1 13.0 19.6 PAN GS 060 RGE 015.0 # K1 225 12.5 M9G# 120B* 10.2 19.6 PAN GS 060 IGE 012.5 # K1 10.8 19.6 PAN GS 060 RGE 012.5 # K1 225 10 M9G# 150B* 8.2 19.6 PAN GS 060 IGE 010.0 # K1 8.7 19.6 PAN GS 060 RGE 010.0 # K1 225 7.5 M9G# 200B* 6.1 19.6 PAN GS 060 IGE 007.5 # K1 6.5 19.6 PAN GS 060 RGE 007.5 # K1 225 M9GC 10XB* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below 6.0 M9G# 25B* 4.9 19.6 PAN GS 060 IGE 006.0 # K1 5.2 19.6 PAN GS 060 RGE 006.0 # K1 265 5.0 M9G# 30B* 4.1 19.6 PAN GS 060 IGE 005.0 # K1 4.3 19.6 PAN GS 060 RGE 005.0 # K1 265 3.0 M9G# 50B* 2.5 19.6 PAN GS 060 IGE 003.0 # K1 2.6 19.6 PAN GS 060 RGE 003.0 # K1 265 2.0 M9G# 75B* 1.6 19.6 PAN GS 060 IGE 002.0 # K1 1.7 19.6 PAN GS 060 RGE 002.0 # K1 265 1.5 M9G# 100B* 1.2 19.6 PAN GS 060 IGE 001.5 # K1 1.3 19.6 PAN GS 060 RGE 001.5 # K1 265 5.1 1.3 M9G# 120B* 1.0 19.6 PAN GS 060 IGE 001.3 # K1 1.1 19.6 PAN GS 060 RGE 001.3 # K1 265 1.0 M9G# 150B* 0.8 19.6 PAN GS 060 IGE 001.0 # K1 0.9 19.6 PAN GS 060 RGE 001.0 # K1 265 0.8 M9G# 200B* 0.7 19.6 PAN GS 060 IGE 000.8 # K1 0.7 19.6 PAN GS 060 RGE 000.8 # K1 265 HIGHER TORQUES available from 30 r/min and slower speeds, see following 60W high torque pages. * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

60W 1 phase 67 5 38 12 1 75 30 MAX 29 44 25 15 4 x M6 ON 104 P.C.D. 67 5 Ø15 h7 17 38 29 25 1 75 30 MAX 18 Ø34 36 60 (73.5) 92 18 Ø34 Ø34 Ø15 h7 17 31 4 HOLES Ø8.5 90 110 130 4 x M6 ON 104 PCD L 120 (73.5) 31 92 90 L 120 Standard induction Quick reversible 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 230 V 230 V Rated current 0.51 A Rated current 0.57 A Starting current 0.85 A Starting current 1.05 A Input power 118 W Input power 127 W Rated speed 1225 r/min Rated speed 1300 r/min

60W HT 1 phase Standard & Quick Reversible For speeds of 30 r/min and below high torque gearboxes are available, giving torques up to 29.4. Standard induction motors suit fixed speed applications. Quick reversing motors have a built-in braking system for reduced overrun and fast reversing. Both models are available with flanged or square gearboxes. Flanged M9GS gearbox 16 Rated 230V ± 10% and 50 Hz Continuous duty S1 Enclosure IP54 Class E insulation Supplied with run capacitor (Standard 4.0µF, QR 5.0µF) Integrated thermal protection switch (For external connection) approved, UL on request Square M9GT gearbox Ordering specification and example Replace the letter # from the assembly number with a S for flanged gearbox or T for square gearbox as required. Examples: 30 r/min flanged with standard induction motor PAN GS 060 IGE 030.0 S K1 1.5 r/min square with quick reversible motor PAN GS 060 RGE 001.5 T K1 See page 48 for terminal box positions and feet. Standard Induction Motor Quick Reversible Motor Model Number : M9IC60GK4GE Model Number : M9RC60GK4GE Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @230V number L kg 30 M9G# 50B 25 16.5 PAN GS 060 IGE 030.0 # K1 26 15.4 PAN GS 060 RGE 030.0 # K1 252 20 M9G# 75B* 16.3 22.9 PAN GS 060 IGE 020.0 # K1 17 21.5 PAN GS 060 RGE 020.0 # K1 252 15 M9G# 100B* 12.3 29.4 PAN GS 060 IGE 015.0 # K1 13 29.4 PAN GS 060 RGE 015.0 # K1 252 12.5 M9G# 120B* 10.2 29.4 PAN GS 060 IGE 012.5 # K1 10.8 29.4 PAN GS 060 RGE 012.5 # K1 252 4.9 10 M9G# 150B* 8.2 29.4 PAN GS 060 IGE 010.0 # K1 8.7 29.4 PAN GS 060 RGE 010.0 # K1 252 7.5 M9G# 200B* 6.1 29.4 PAN GS 060 IGE 007.5 # K1 6.5 29.4 PAN GS 060 RGE 007.5 # K1 252 M9GC 10XB* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below 3.0 M9G# 50B* 2.5 29.4 PAN GS 060 IGE 003.0 # K1 2.6 29.4 PAN GS 060 RGE 003.0 # K1 292 2.0 M9G# 75B* 1.6 29.4 PAN GS 060 IGE 002.0 # K1 1.7 29.4 PAN GS 060 RGE 002.0 # K1 292 1.5 M9G# 100B* 1.2 29.4 PAN GS 060 IGE 001.5 # K1 1.3 29.4 PAN GS 060 RGE 001.5 # K1 292 1.3 M9G# 120B* 1.0 29.4 PAN GS 060 IGE 001.3 # K1 1.1 29.4 PAN GS 060 RGE 001.3 # K1 292 5.5 1.0 M9G# 150B* 0.8 29.4 PAN GS 060 IGE 001.0 # K1 0.9 29.4 PAN GS 060 RGE 001.0 # K1 292 0.8 M9G# 200B* 0.7 29.4 PAN GS 060 IGE 000.8 # K1 0.7 29.4 PAN GS 060 RGE 000.8 # K1 292 HIGHER SPEEDS see the 60W and 90W selections on adjacent pages * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

60W 1 phase high torque 67 6 45 12 1 75 30 MAX 35 30 18 CTRS 36 60 (73.5) 92 44 Ø18 h7 20.5 Ø40 38 4 HOLES Ø8.5 90 110 130 L 120 17 4 HOLES Ø8.5 ON 104 P.C.D. 18 CTRS 67 6 (73.5) 44 Ø40 Ø18 h7 Ø40 Ø18 h7 20.5 45 35 30 12 1 75 30 MAX 92 38 90 L 120 Standard induction Quick reversible 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 230 V 230 V Rated current 0.51 A Rated current 0.57 A Starting current 0.85 A Starting current 1.05 A Input power 118 W Input power 127 W Rated speed 1225 r/min Rated speed 1300 r/min

90W 1 phase Standard & Quick Reversible Standard induction motors suit fixed speed applications. Quick reversing motors have a built-in braking system for reduced overrun and fast reversing. Both models are available with flanged or square gearboxes. Flanged M9GC gearbox 18 Rated 230V ± 10% and 50 Hz Standard motor rated continuous duty S1, quick reversing duty S2 Enclosure IP54 Class E insulation Supplied with run capacitor (Standard 4.5µF, QR 5.5µF) Integrated thermal protection switch (For external connection) approved, UL on request Square M9GD gearbox Ordering specification and example Replace the letter # from the assembly number with a C for flanged gearbox or D for square gearbox as required. Examples: 100 r/min flanged with standard induction motor PAN GS 090 IGE 100.0 C K1 5 r/min square with quick reversible motor PAN GS 090 RGE 005.0 D K1 See page 48 for terminal box positions and feet. Standard Induction Motor Quick Reversible Motor Model Number : M9IC90GK4GE Model Number : M9RC90GK4GE Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @230V number L kg 500 M9G# 3B 442 1.5 PAN GS 090 IGE 500.0 # K1 350 1.9 PAN GS 090 RGE 500.0 # K1 240 300 M9G# 5B 265 2.6 PAN GS 090 IGE 300.0 # K1 210 3.1 PAN GS 090 RGE 300.0 # K1 240 200 M9G# 7.5B 177 3.8 PAN GS 090 IGE 200.0 # K1 140 4.6 PAN GS 090 RGE 200.0 # K1 240 150 M9G# 10B 133 4.7 PAN GS 090 IGE 150.0 # K1 105 5.7 PAN GS 090 RGE 150.0 # K1 240 100 M9G# 15B 88 7.1 PAN GS 090 IGE 100.0 # K1 70 8.6 PAN GS 090 RGE 100.0 # K1 240 75 M9G# 20B 66 8.8 PAN GS 090 IGE 075.0 # K1 53 10.6 PAN GS 090 RGE 075.0 # K1 240 60 M9G# 25B 53 11 PAN GS 090 IGE 060.0 # K1 42 13.3 PAN GS 090 RGE 060.0 # K1 240 50 M9G# 30B 44 13.2 PAN GS 090 IGE 050.0 # K1 35 16.0 PAN GS 090 RGE 050.0 # K1 240 4.5 30 M9G# 50B 26.5 19.6 PAN GS 090 IGE 030.0 # K1 21 19.6 PAN GS 090 RGE 030.0 # K1 240 20 M9G# 75B* 17.7 19.6 PAN GS 090 IGE 020.0 # K1 14 19.6 PAN GS 090 RGE 020.0 # K1 240 15 M9G# 100B* 13.3 19.6 PAN GS 090 IGE 015.0 # K1 10.5 19.6 PAN GS 090 RGE 015.0 # K1 240 12.5 M9G# 120B* 11 19.6 PAN GS 090 IGE 012.5 # K1 8.8 19.6 PAN GS 090 RGE 012.5 # K1 240 10 M9G# 150B* 8.8 19.6 PAN GS 090 IGE 010.0 # K1 7 19.6 PAN GS 090 RGE 010.0 # K1 240 7.5 M9G# 200B* 6.6 19.6 PAN GS 090 IGE 007.5 # K1 5.3 19.6 PAN GS 090 RGE 007.5 # K1 240 M9GC 10XB* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below 6.0 M9G# 25B* 5.3 19.6 PAN GS 060 IGE 006.0 # K1 4.2 19.6 PAN GS 090 RGE 006.0 # K1 280 5.0 M9G# 30B* 4.4 19.6 PAN GS 060 IGE 005.0 # K1 3.5 19.6 PAN GS 090 RGE 005.0 # K1 280 5.4 HIGHER TORQUES available from 20 r/min and slower speeds, see previous 60W high torque pages. * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

90W 1 phase 67 5 38 12 1 75 30 MAX 44 29 25 36 60 (73.5) 92 Ø34 18 Ø15 h7 17 4 HOLES Ø8.5 31 90 110 130 4 x M6 ON 104 PCD L 135 19 4 x M6 ON 104 P.C.D. 67 5 Ø15 h7 17 38 29 25 1 75 30 MAX Ø34 (73.5) 18 31 92 90 L 135 Standard induction Quick reversible 1.5 1.5 1.0 1.0 duty S2 0.5 0.5 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 230 V 230 V Rated current Starting current Input power Rated speed 0.67 A 1.40 A 153 W 1325 r/min Rated current Starting current Input power Rated speed 0.84 A 1.08 A 194 W 1050 r/min

25W 3 phase These 3 phase induction motors deliver high starting torques. 400V versions suit fixed speed applications. 230V versions are ideal for use with inverters such as the Panasonic Micro-Inverter. 20 Rated 230V or 400V ± 10% Continuous duty S1 Enclosure IP54 Class E insulation Integrated thermal protection switch (For external connection) approved, UL on request M8GA gearbox 230V 3 phase Motor 400V 3 phase Motor Model Number : M8MA25GKP4W1 Model Number : M8MA25GK4CE1 Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @400V number L kg 500 M8GA 3B 458 0.41 PAN GS 025 MPW 500.0 A K1 450 0.41 PAN GS 025 MCE 500.0 A K1 149 300 M8GA 5B 275 0.69 PAN GS 025 MPW 300.0 A K1 270 0.69 PAN GS 025 MCE 300.0 A K1 149 200 M8GA 7.5B 183 1 PAN GS 025 MPW 200.0 A K1 180 1 PAN GS 025 MCE 200.0 A K1 149 150 M8GA 10B 138 1.3 PAN GS 025 MPW 150.0 A K1 135 1.3 PAN GS 025 MCE 150.0 A K1 149 100 M8GA 15B 92 1.9 PAN GS 025 MPW 100.0 A K1 90 1.9 PAN GS 025 MCE 100.0 A K1 149 75 M8GA 20B 69 2.6 PAN GS 025 MPW 075.0 A K1 68 2.6 PAN GS 025 MCE 075.0 A K1 159 60 M8GA 25B 55 3.2 PAN GS 025 MPW 060.0 A K1 54 3.2 PAN GS 025 MCE 060.0 A K1 159 50 M8GA 30B 46 3.8 PAN GS 025 MPW 050.0 A K1 45 3.8 PAN GS 025 MCE 050.0 A K1 159 2.8 30 M8GA 50B 27.5 6.4 PAN GS 025 MPW 030.0 A K1 27 6.4 PAN GS 025 MCE 030.0 A K1 159 20 M8GA 75B* 18.3 7.8 PAN GS 025 MPW 020.0 A K1 18 7.8 PAN GS 025 MCE 020.0 A K1 159 15 M8GA 100B* 13.8 7.8 PAN GS 025 MPW 015.0 A K1 13.5 7.8 PAN GS 025 MCE 015.0 A K1 159 12.5 M8GA 120B* 11.5 7.8 PAN GS 025 MPW 012.5 A K1 11.3 7.8 PAN GS 025 MCE 012.5 A K1 159 10 M8GA 150B* 9.2 7.8 PAN GS 025 MPW 010.0 A K1 9 7.8 PAN GS 025 MCE 010.0 A K1 159 8.3 M8GA 180B* 7.6 7.8 PAN GS 025 MPW 008.3 A K1 7.5 7.8 PAN GS 025 MCE 008.3 A K1 159 M8GA 10XM* Additional gearbox M8GA 10XM must be used for speeds of 7.5 r/min and below 7.5 M8GA 20B* 6.9 7.8 PAN GS 025 MPW 007.5 A K1 6.8 7.8 PAN GS 025 MCE 007.5 A K1 186 6.0 M8GA 25B* 5.5 7.8 PAN GS 025 MPW 006.0 A K1 5.4 7.8 PAN GS 025 MCE 006.0 A K1 186 5.0 M8GA 30B* 4.6 7.8 PAN GS 025 MPW 005.0 A K1 4.5 7.8 PAN GS 025 MCE 005.0 A K1 186 3.0 M8GA 50B* 2.8 7.8 PAN GS 025 MPW 003.0 A K1 2.7 7.8 PAN GS 025 MCE 003.0 A K1 186 2.0 M8GA 75B* 1.8 7.8 PAN GS 025 MPW 002.0 A K1 1.8 7.8 PAN GS 025 MCE 002.0 A K1 186 2.9 1.5 M8GA 100B* 1.4 7.8 PAN GS 025 MPW 001.5 A K1 1.4 7.8 PAN GS 025 MCE 001.5 A K1 186 1.3 M8GA 120B* 1.1 7.8 PAN GS 025 MPW 001.3 A K1 1.1 7.8 PAN GS 025 MCE 001.3 A K1 186 1.0 M8GA 150B* 0.9 7.8 PAN GS 025 MPW 001.0 A K1 0.9 7.8 PAN GS 025 MCE 001.0 A K1 186 0.8 M8GA 180B* 0.8 7.8 PAN GS 025 MPW 000.8 A K1 0.8 7.8 PAN GS 025 MCE 000.8 A K1 186 * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

25W 3 phase 67 32 1 11.5 26 25 75 30 MAX ø82 15 CTRS 4 44 ø30 10ø h7 21 (66.5) 80 4xM5 ON 94 PCD L 85 Variable speed operation Panasonic G-series geared motors suit operation with either the Panasonic Mirco-inverter or the Lenze smd inverter. Both require only 1 phase mains input to control 230V 3 phase motors. Micro-Inverter Very compact Simple operation 30:1 speed range Good torque performance see page 40 Lenze smd inverter 1.5x overload for 60s Integral RFI filter EPM memory chip 250W version suits all G-series See our website www.lenze.co.uk 1.5 1.25 1.0 0.75 0.5 0.25 0 0 250 500 750 1000 1250 1500 1750 2000 Speed (r/min.) Motor speed-torque curve 230 V 400 V Rated current 0.26 A 0.12 A Starting current 0.68 A 0.31 A Input power 53 W 51 W Rated speed 1375r/min 1350r/min

40W 3 phase These 3 phase induction motors deliver high starting torques. 400V versions suit fixed speed applications. 230V versions are ideal for use with inverters such as the Panasonic Micro-Inverter. 22 Rated 230V or 400V ± 10% Continuous duty S1 Enclosure IP54 Class E insulation Integrated thermal protection switch (For external connection) approved, UL on request M9GA gearbox 230V 3 phase Motor 400V 3 phase Motor Model Number : M8MA40GKP4W1 Model Number : M8MA40GK4CE1 Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @400V number L kg 500 M9GA 3B 458 0.66 PAN GS 040 MPW 500.0 A K1 458 0.63 PAN GS 040 MCE 500.0 A K1 179 300 M9GA 5B 275 1.1 PAN GS 040 MPW 300.0 A K1 275 1.1 PAN GS 040 MCE 300.0 A K1 179 200 M9GA 7.5B 183 1.6 PAN GS 040 MPW 200.0 A K1 183 1.6 PAN GS 040 MCE 200.0 A K1 179 150 M9GA 10B 138 2 PAN GS 040 MPW 150.0 A K1 138 1.9 PAN GS 040 MCE 150.0 A K1 179 100 M9GA 15B 92 3 PAN GS 040 MPW 100.0 A K1 92 2.9 PAN GS 040 MCE 100.0 A K1 179 75 M9GA 20B 69 4 PAN GS 040 MPW 075.0 A K1 69 3.9 PAN GS 040 MCE 075.0 A K1 197 60 M9GA 25B 55 5.1 PAN GS 040 MPW 060.0 A K1 55 4.9 PAN GS 040 MCE 060.0 A K1 197 50 M9GA 30B 46 6.1 PAN GS 040 MPW 050.0 A K1 46 5.9 PAN GS 040 MCE 050.0 A K1 197 4.0 30 M9GA 50B 27.5 9.8 PAN GS 040 MPW 030.0 A K1 27.5 9.8 PAN GS 040 MCE 030.0 A K1 197 20 M9GA 75B* 18.3 9.8 PAN GS 040 MPW 020.0 A K1 18.3 9.8 PAN GS 040 MCE 020.0 A K1 197 15 M9GA 100B* 13.8 9.8 PAN GS 040 MPW 015.0 A K1 13.8 9.8 PAN GS 040 MCE 015.0 A K1 197 12.5 M9GA 120B* 11.5 9.8 PAN GS 040 MPW 012.5 A K1 11.5 9.8 PAN GS 040 MCE 012.5 A K1 197 10 M9GA 150B* 9.2 9.8 PAN GS 040 MPW 010.0 A K1 9.2 9.8 PAN GS 040 MCE 010.0 A K1 197 8.3 M9GA 180B* 7.6 9.8 PAN GS 040 MPW 008.3 A K1 7.6 9.8 PAN GS 040 MCE 008.3 A K1 197 M9GA 10XM* Additional gearbox M9GA 10XM must be used for speeds of 7.5 r/min and below 7.5 M9GA 20B* 6.9 9.8 PAN GS 040 MPW 007.5 A K1 6.9 9.8 PAN GS 040 MCE 007.5 A K1 229 6.0 M9GA 25B* 5.5 9.8 PAN GS 040 MPW 006.0 A K1 5.5 9.8 PAN GS 040 MCE 006.0 A K1 229 5.0 M9GA 30B* 4.6 9.8 PAN GS 040 MPW 005.0 A K1 4.6 9.8 PAN GS 040 MCE 005.0 A K1 229 3.0 M9GA 50B* 2.8 9.8 PAN GS 040 MPW 003.0 A K1 2.8 9.8 PAN GS 040 MCE 003.0 A K1 229 2.0 M9GA 75B* 1.8 9.8 PAN GS 040 MPW 002.0 A K1 1.8 9.8 PAN GS 040 MCE 002.0 A K1 229 4.7 1.5 M9GA 100B* 1.4 9.8 PAN GS 040 MPW 001.5 A K1 1.4 9.8 PAN GS 040 MCE 001.5 A K1 229 1.3 M9GA 120B* 1.1 9.8 PAN GS 040 MPW 001.3 A K1 1.1 9.8 PAN GS 040 MCE 001.3 A K1 229 1.0 M9GA 150B* 0.9 9.8 PAN GS 040 MPW 001.0 A K1 0.9 9.8 PAN GS 040 MCE 001.0 A K1 229 0.8 M9GA 180B* 0.8 9.8 PAN GS 040 MPW 000.8 A K1 0.8 9.8 PAN GS 040 MCE 000.8 A K1 229 * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

23 40W 3 phase 67 32 13.5 27 25 1 75 30 MAX ø92 18 CTRS 4 44 ø36 ø12 h7 (73.5) 4xM6 ON 104 PCD 105 90 L Variable speed operation Panasonic G-series geared motors suit operation with either the Panasonic Mirco-inverter or the Lenze smd inverter. Both require only 1 phase mains input to control 230V 3 phase motors. Micro-Inverter Very compact Simple operation 30:1 speed range Good torque performance see page 40 Lenze smd inverter 1.5x overload for 60s Integral RFI filter EPM memory chip 250W version suits all G-series See our website www.lenze.co.uk 1.5 1.25 1.0 0.75 0.5 0.25 0 0 250 500 750 1000 1250 1500 1750 2000 Speed (r/min.) Motor speed-torque curve 230 V 400 V Rated current 0.33 A 0.15 A Starting current 1.0 A 0.46 A Input power 70 W 62 W Rated speed 1375r/min 1350r/min

60W 3 phase These 3 phase induction motors deliver high starting torques. 400V versions suit fixed speed applications. 230V versions are ideal for use with inverters such as the Panasonic Micro-Inverter. All 60W geared motors are available with flanged or square gearboxes. Flanged M9GC gearbox 24 Rated 230V or 400V ± 10% Continuous duty S1 Enclosure IP54 Class E insulation Integrated thermal protection switch (For external connection) approved, UL on request Square M9GD gearbox Ordering specification and example Replace the letter # from the assembly number with a C for flanged gearbox or D for square gearbox as required. Examples: 100 r/min flanged with 230V 3 phase motor PAN GS 060 MPW 100.0 C K1 5 r/min square with 400V 3 phase motor PAN GS 060 MCE 005.0 D K1 See page 48 for terminal box positions and feet. 230V 3 phase Motor 400V 3 phase Motor Model Number : M9MC60GKP4W1 Model Number : M9MC60GK4CE1 Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @400V number L kg 500 M9G# 3B 458 1 PAN GS 060 MPW 500.0 # K1 458 1 PAN GS 060 MCE 500.0 # K1 225 300 M9G# 5B 275 1.7 PAN GS 060 MPW 300.0 # K1 275 1.71 PAN GS 060 MCE 300.0 # K1 225 200 M9G# 7.5B 183 2.5 PAN GS 060 MPW 200.0 # K1 183 2.5 PAN GS 060 MCE 200.0 # K1 225 150 M9G# 10B 138 3.1 PAN GS 060 MPW 150.0 # K1 138 3.1 PAN GS 060 MCE 150.0 # K1 225 100 M9G# 15B 92 4.6 PAN GS 060 MPW 100.0 # K1 92 4.6 PAN GS 060 MCE 100.0 # K1 225 75 M9G# 20B 69 5.7 PAN GS 060 MPW 075.0 # K1 69 5.7 PAN GS 060 MCE 075.0 # K1 225 60 M9G# 25B 55 7.2 PAN GS 060 MPW 060.0 # K1 55 7.2 PAN GS 060 MCE 060.0 # K1 225 50 M9G# 30B 46 8.6 PAN GS 060 MPW 050.0 # K1 46 8.6 PAN GS 060 MCE 050.0 # K1 225 4.5 30 M9G# 50B 27.5 14.4 PAN GS 060 MPW 030.0 # K1 27.5 14.4 PAN GS 060 MCE 030.0 # K1 225 20 M9G# 75B* 18.3 19.6 PAN GS 060 MPW 020.0 # K1 18.3 19.6 PAN GS 060 MCE 020.0 # K1 225 15 M9G# 100B* 13.8 19.6 PAN GS 060 MPW 015.0 # K1 13.8 19.6 PAN GS 060 MCE 015.0 # K1 225 12.5 M9G# 120B* 11.5 19.6 PAN GS 060 MPW 012.5 # K1 11.5 19.6 PAN GS 060 MCE 012.5 # K1 225 10 M9G# 150B* 9.2 19.6 PAN GS 060 MPW 010.0 # K1 9.2 19.6 PAN GS 060 MCE 010.0 # K1 225 7.5 M9G# 200B* 7.6 19.6 PAN GS 060 MPW 008.3 # K1 7.6 19.6 PAN GS 060 MCE 008.3 # K1 225 M9GC 10XM* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below 7.5 M9G# 20B* 6.9 19.6 PAN GS 060 MPW 007.5 # K1 6.9 19.6 PAN GS 060 MCE 007.5 # K1 265 6.0 M9G# 25B* 5.5 19.6 PAN GS 060 MPW 006.0 # K1 5.5 19.6 PAN GS 060 MCE 006.0 # K1 265 5.0 M9G# 30B* 4.6 19.6 PAN GS 060 MPW 005.0 # K1 4.6 19.6 PAN GS 060 MCE 005.0 # K1 265 3.0 M9G# 50B* 2.8 19.6 PAN GS 060 MPW 003.0 # K1 2.8 19.6 PAN GS 060 MCE 003.0 # K1 265 2.0 M9G# 75B* 1.8 19.6 PAN GS 060 MPW 002.0 # K1 1.8 19.6 PAN GS 060 MCE 002.0 # K1 265 5.1 1.5 M9G# 100B* 1.4 19.6 PAN GS 060 MPW 001.5 # K1 1.4 19.6 PAN GS 060 MCE 001.5 # K1 265 1.3 M9G# 120B* 1.1 19.6 PAN GS 060 MPW 001.3 # K1 1.1 19.6 PAN GS 060 MCE 001.3 # K1 265 1.0 M9G# 150B* 0.9 19.6 PAN GS 060 MPW 001.0 # K1 0.9 19.6 PAN GS 060 MCE 001.0 # K1 265 0.8 M9G# 200B* 0.8 19.6 PAN GS 060 MPW 000.8 # K1 0.8 19.6 PAN GS 060 MCE 000.8 # K1 265 HIGHER TORQUES available from 30 r/min and slower speeds, see following 60W high torque pages. * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

60W 3 phase 67 5 38 29 25 12 1 75 30 MAX 36 60 92 Ø34 Ø15 h7 17 Ø34 44 (73.5) 18 4 HOLES Ø8.5 31 90 110 4 x M6 ON 104 PCD D L 120 25 4 x M6 ON 104 P.C.D. 67 5 Ø15 h7 17 38 29 25 1 75 30 MAX Ø34 Ø34 (73.5) 18 31 92 90 L 120 Variable speed operation Panasonic G-series geared motors suit operation with either the Panasonic Mirco-inverter or the Lenze smd inverter. Both require only 1 phase mains input to control 230V 3 phase motors. Micro-Inverter Very compact Simple operation 30:1 speed range Good torque performance see page 40 Lenze smd inverter 1.5x overload for 60s Integral RFI filter EPM memory chip 250W version suits all G-series See our website www.lenze.co.uk 1.5 1.25 1.0 0.75 0.5 0.25 0 0 250 500 750 1000 1250 1500 1750 2000 Speed (r/min.) Motor speed-torque curve 230 V 400 V Rated current 0.46 A 0.21 A Starting current 1.5 A 0.70 A Input power 103 W 94 W Rated speed 1375r/min 1375r/min

60 HT 3 phase For speeds of 30 r/min and below a high torque gearbox is available to give torque up to 29.4. These 3 phase induction motors deliver high starting torques. 400V versions suit fixed speed applications. 230V versions are ideal for use with inverters such as the Panasonic Micro-Inverter. Flanged M9GS gearbox All 60W geared motors are available with flanged or square gearboxes. 26 Rated 230V or 400V ± 10% Continuous duty S1 Enclosure IP54 Class E insulation Integrated thermal protection switch (For external connection) approved, UL on request Square M9GT gearbox Ordering specification and example Replace the letter # from the assembly number with a S for flanged gearbox or T for square gearbox as required. Examples: 30 r/min flanged with 230V 3 phase motor PAN GS 060 MPW 030.0 S K1 1.5 r/min square with 400V 3 phase motor PAN GS 060 MCE 001.5 T K1 See page 48 for terminal box positions and feet. 230V 3 phase Motor 400V 3 phase Motor Model Number : M9MC60GKP4W1 Model Number : M9MC60GK4CE1 Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @400V number L kg 30 M9G# 50B 27.5 14.4 PAN GS 060 MPW 030.0 # K1 27.5 14.4 PAN GS 060 MCE 030.0 # K1 225 20 M9G# 75B* 18.3 20 PAN GS 060 MPW 020.0 # K1 18.3 20 PAN GS 060 MCE 020.0 # K1 225 15 M9G# 100B* 13.8 26.7 PAN GS 060 MPW 015.0 # K1 13.8 26.7 PAN GS 060 MCE 015.0 # K1 225 4.9 12.5 M9G# 120B* 11.5 29.6 PAN GS 060 MPW 012.5 # K1 11.5 29.6 PAN GS 060 MCE 012.5 # K1 225 10 M9G# 150B* 9.2 29.6 PAN GS 060 MPW 010.0 # K1 9.2 29.6 PAN GS 060 MCE 010.0 # K1 225 7.5 M9G# 200B* 6.9 29.6 PAN GS 060 MPW 007.5 # K1 6.9 29.6 PAN GS 060 MCE 007.5 # K1 265 M9GC 10XM* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below 3.0 M9G# 50B* 2.8 29.6 PAN GS 060 MPW 003.0 # K1 2.8 29.6 PAN GS 060 MCE 003.0 # K1 265 2.0 M9G# 75B* 1.8 29.6 PAN GS 060 MPW 002.0 # K1 1.8 29.6 PAN GS 060 MCE 002.0 # K1 265 5.5 1.5 M9G# 100B* 1.4 29.6 PAN GS 060 MPW 001.5 # K1 1.4 29.6 PAN GS 060 MCE 001.5 # K1 265 1.3 M9G# 120B* 1.1 29.6 PAN GS 060 MPW 001.3 # K1 1.1 29.6 PAN GS 060 MCE 001.3 # K1 265 1.0 M9G# 150B* 0.9 29.6 PAN GS 060 MPW 001.0 # K1 0.9 29.6 PAN GS 060 MCE 001.0 # K1 265 0.8 M9G# 180B* 0.8 29.6 PAN GS 060 MPW 000.8 # K1 0.8 29.6 PAN GS 060 MCE 000.8 # K1 265 HIGHER SPEEDS see the 60W and 90W selections on adjacent pages * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

60W 3 phase high torque 67 6 44 45 35 30 12 1 75 30 MAX 18 CTRS 36 60 92 Ø18 h7 20.5 (73.5) Ø40 38 4 HOLES Ø8.5 90 110 130 L 120 27 4 HOLES Ø8.5 ON 104 P.C.D. 18 CTRS 67 6 (73.5) 44 Ø40 Ø18 h7 20.5 45 35 30 12 1 75 30 MAX 92 38 90 L 120 Variable speed operation Panasonic G-series geared motors suit operation with either the Panasonic Mirco-inverter or the Lenze smd inverter. Both require only 1 phase mains input to control 230V 3 phase motors. Micro-Inverter Very compact Simple operation 30:1 speed range Good torque performance see page 40 Lenze smd inverter 1.5x overload for 60s Integral RFI filter EPM memory chip 250W version suits all G-series See our website www.lenze.co.uk 1.5 1.25 1.0 0.75 0.5 0.25 0 0 250 500 750 1000 1250 1500 1750 2000 Speed (r/min.) Motor speed-torque curve 230 V 400 V Rated current 0.46 A 0.21 A Starting current 1.5 A 0.70 A Input power 103 W 94 W Rated speed 1375r/min 1375r/min

90W 3 phase These 3 phase induction motors deliver high starting torques. 400V versions suit fixed speed applications. 230V versions are ideal for use with inverters such as the Panasonic Micro-Inverter. Flanged M9GC gearbox All 90W geared motors are available with flanged or square gearboxes. 28 Rated 230V ± 10% Continuous duty S1 Enclosure IP54 (cable downwards) Class E insulation Integrated thermal protection switch (For external connection) approved, UL on request Square M9GD gearbox Ordering specification and example Replace the letter # from the assembly number with a C for flanged gearbox or D for square gearbox as required. Examples: 100 r/min flanged with 230V 3 phase motor PAN GS 100.0 MPW 100.0 C K1 5 r/min square with 400V 3 phase motor PAN GS 100.0 MCE 005.0 D K1 See page 48 for terminal box positions and feet. 230V 3 phase Motor 400V 3 phase Motor Model Number : M9MC90GKP4W1 Model Number : M9MC90GK4CE1 Nominal Gearbox Actual Rated Actual Rated speed model speed torque Assembly speed torque Assembly Length Weight r/min number @230V number @400V number L kg 500 M9G# 3B 458 1.5 PAN GS 060 MPW 500.0 # K1 458 1.4 PAN GS 060 MCE 500.0 # K1 240 300 M9G# 5B 275 2.5 PAN GS 060 MPW 300.0 # K1 275 2.4 PAN GS 060 MCE 300.0 # K1 240 200 M9G# 7.5B 183 3.8 PAN GS 060 MPW 200.0 # K1 183 3.5 PAN GS 060 MCE 200.0 # K1 240 150 M9G# 10B 138 4.7 PAN GS 060 MPW 150.0 # K1 138 4.4 PAN GS 060 MCE 150.0 # K1 240 100 M9G# 15B 92 7 PAN GS 060 MPW 100.0 # K1 92 6.5 PAN GS 060 MCE 100.0 # K1 240 75 M9G# 20B 69 8.7 PAN GS 060 MPW 075.0 # K1 69 8.1 PAN GS 060 MCE 075.0 # K1 240 60 M9G# 25B 55 10.8 PAN GS 060 MPW 060.0 # K1 55 10.2 PAN GS 060 MCE 060.0 # K1 240 50 M9G# 30B 46 13.0 PAN GS 060 MPW 050.0 # K1 46 12.2 PAN GS 060 MCE 050.0 # K1 240 4.8 30 M9G# 50B 27.5 19.6 PAN GS 060 MPW 030.0 # K1 27.5 19.6 PAN GS 060 MCE 030.0 # K1 240 20 M9G# 75B* 18.3 19.6 PAN GS 060 MPW 020.0 # K1 18.3 19.6 PAN GS 060 MCE 020.0 # K1 240 15 M9G# 100B* 13.8 19.6 PAN GS 060 MPW 015.0 # K1 13.8 19.6 PAN GS 060 MCE 015.0 # K1 240 12.5 M9G# 120B* 11.5 19.6 PAN GS 060 MPW 012.5 # K1 11.5 19.6 PAN GS 060 MCE 012.5 # K1 240 10 M9G# 150B* 9.2 19.6 PAN GS 060 MPW 010.0 # K1 9.2 19.6 PAN GS 060 MCE 010.0 # K1 240 7.5 M9G# 200B* 6.9 19.6 PAN GS 060 MPW 007.5 # K1 6.9 19.6 PAN GS 060 MCE 007.5 # K1 240 M9GC 10XM* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below 6.0 M9G# 25B* 5.5 19.6 PAN GS 060 MPW 006.0 # K1 5.5 19.6 PAN GS 060 MCE 006.0 # K1 280 5.0 M9G# 30B* 4.6 19.6 PAN GS 060 MPW 005.0 # K1 4.6 19.6 PAN GS 060 MCE 005.0 # K1 280 5.4 HIGHER TORQUES available from 20 r/min and slower, see previous 60W high torque pages. * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

90W 3 phase 67 5 38 12 1 75 30 MAX 44 29 25 36 60 (73.5) 92 Ø34 18 Ø15 h7 17 4 HOLES Ø8.5 31 90 110 130 4 x M6 ON 104 PCD L 135 29 4 x M6 ON 104 P.C.D. 67 5 Ø15 h7 17 38 29 25 1 75 30 MAX (73.5) Ø34 18 31 92 90 L 135 Variable speed operation Panasonic G-series geared motors suit operation with either the Panasonic Mirco-inverter or the Lenze smd inverter. Both require only 1 phase mains input to control 230V 3 phase motors. Micro-Inverter Very compact Simple operation 30:1 speed range Good torque performance see page 40 Lenze smd inverter 1.5x overload for 60s Integral RFI filter EPM memory chip 250W version suits all G-series See our website www.lenze.co.uk 1.5 1.25 1.0 0.75 0.5 0.25 0 0 250 500 750 1000 1250 1500 1750 2000 Speed (r/min.) Motor speed-torque curve 230 V 400 V Rated current 0.70 A 0.30 A Starting current 2.2 A 0.95 A Input power 145 W 132 W Rated speed 1375r/min 1350r/min

geared brake motors Brake motors feature a spring applied electromagnetic brake suitable for fast stop and holding torques. 6W 1 phase braked The brake is operated from mains supply connections. Up to six stops/starts per minute are possible. M6GA gearbox 30 Rated 230V ± 10% and 50 Hz Continuous duty S1 Enclosure IP22 (cable downloads) Class E insulation Supplied with 0.6µF run capacitor Thermal protection by impedance current limiting approved, UL on request 1 phase Brake Motor Model Number : M6RA6GB4GE Nominal Gearbox Actual Rated Braking speed model speed torque torque Assembly Length Weight r/min number @230V number L kg 500 M6GA 3B 408 0.11 0.12 PAN GS 006 BGE 500.0 A L1 173 300 M6GA 5B 245 0.18 0.2 PAN GS 006 BGE 300.0 A L1 173 200 M6GA 7.5B 163 0.27 0.3 PAN GS 006 BGE 200.0 A L1 173 150 M6GA 10B 123 0.33 0.37 PAN GS 006 BGE 150.0 A L1 173 100 M6GA 15B 82 0.5 0.55 PAN GS 006 BGE 100.0 A L1 173 75 M6GA 20B 61 0.66 0.75 PAN GS 006 BGE 075.0 A L1 182 60 M6GA 25B 49 0.83 0.92 PAN GS 006 BGE 060.0 A L1 182 50 M6GA 30B 41 1.0 1.1 PAN GS 006 BGE 050.0 A L1 182 1.01 30 M6GA 50B 25 1.7 1.84 PAN GS 006 BGE 030.0 A L1 182 20 M6GA 75B* 16.3 2.3 2.5 PAN GS 006 BGE 020.0 A L1 182 15 M6GA 100B* 12.3 2.5 2.5 PAN GS 006 BGE 015.0 A L1 182 12.5 M6GA 120B* 10.2 2.5 2.5 PAN GS 006 BGE 012.5 A L1 182 10 M6GA 150B* 8.2 2.5 2.5 PAN GS 006 BGE 010.0 A L1 182 8.3 M6GA 180B* 6.8 2.5 2.5 PAN GS 006 BGE 008.3 A L1 182 Motor details Rated current 0.10A Starting current 1.12A Input power 22W Rated speed 1225r/min * torque limiter recommended 1 signifies standard leadwire position 1 as shown. For further mounting positions please see page 48. MOTOR CABLE 300mm BRAKE CABLE 300mm 4xM4 ON 70 PCD 12 32 26 ø62 10 CTRS 7 ø8 h7 ø25 (49.5) 60 7 L 115 42 3

geared brake motors Brake motors feature a spring applied electromagnetic brake suitable for fast stop and holding torques. 15W 1 phase braked The brake is operated from mains supply connections. Up to six stops/starts per minute are possible. Rated 230V ± 10% and 50 Hz Continuous duty S1 Enclosure IP22 (cable downloads) Class E insulation Supplied with 1.2µF run capacitor Integrated thermal protection switch (For external connection) approved, UL on request M7GA gearbox 31 1 phase Brake Motor Model Number : M7RA15GB4GE Nominal Gearbox Actual Rated Braking speed model speed torque torque Assembly Length Weight r/min number @230V number L kg 500 M7GA 3B 408 0.27 0.19 PAN GS 015 BGE 500.0 A L1 184 300 M7GA 5B 245 0.45 0.32 PAN GS 015 BGE 300.0 A L1 184 200 M7GA 7.5B 163 0.67 0.47 PAN GS 015 BGE 200.0 A L1 184 150 M7GA 10B 123 0.83 0.59 PAN GS 015 BGE 150.0 A L1 184 100 M7GA 15B 82 1.24 0.88 PAN GS 015 BGE 100.0 A L1 184 75 M7GA 20B 61 1.65 1.17 PAN GS 015 BGE 075.0 A L1 194 60 M7GA 25B 49 2.1 1.46 PAN GS 015 BGE 060.0 A L1 194 50 M7GA 30B 41 2.5 1.8 PAN GS 015 BGE 050.0 A L1 194 1.64 30 M7GA 50B 25 4.1 2.9 PAN GS 015 BGE 030.0 A L1 194 20 M7GA 75B* 16.3 4.9 4.1 PAN GS 015 BGE 020.0 A L1 194 15 M7GA 100B* 12.3 4.9 4.9 PAN GS 015 BGE 015.0 A L1 194 12.5 M7GA 120B* 10.2 4.9 4.9 PAN GS 015 BGE 012.5 A L1 194 10 M7GA 150B* 8.2 4.9 4.9 PAN GS 015 BGE 010.0 A L1 194 8.3 M7GA 180B* 6.8 4.9 4.9 PAN GS 015 BGE 008.3 A L1 194 Motor details Rated current 0.17A Starting current 1.24A Input power 38W Rated speed 1225r/min * torque limiter recommended 1 signifies standard leadwire position 1 as shown. For further mounting positions please see page 48. MOTOR CABLE 300mm BRAKE CABLE 300mm 32 27 15 CTRS 4xM5 ON 82 PCD 4 ø30 ø10 h7 ø72 11.5 25 (58) 70 7 L 120 42 3

geared brake motors 25W braked Brake motors feature a spring applied electromagnetic brake suitable for fast stop and holding torques. The brake is operated from mains supply connections. Up to six stops/starts per minute are possible. M8GA gearbox 32 Rated 230V ± 10% and 50 Hz Continuous duty S1 Enclosure IP44 Class E insulation Supplied phase model supplied with 1.8µF run capcitor Integrated thermal protection switch (For external connection) approved, UL on request 1 phase Brake Motor 3 phase Brake Motor Model Number : M8RA25GBK4GE Model Number : M8MA25GBK4W1 Nominal Gearbox Actual Rated Braking Actual Rated Braking speed model speed torque torque Assembly speed torque torque Assembly Length r/min number @230V number @230V number L 500 M8GA 3B 417 0.46 0.24 PAN GS 025 BGE 500.0 A K1 458 0.41 0.24 PAN GS 025 BPW 500.0 A K1 194 300 M8GA 5B 150 0.77 0.4 PAN GS 025 BGE 300.0 A K1 275 0.69 0.4 PAN GS 025 BPW 300.0 A K1 194 200 M8GA 7.5B 167 1.15 0.6 PAN GS 025 BGE 200.0 A K1 183 1 0.6 PAN GS 025 BPW 200.0 A K1 194 150 M8GA 10B 125 1.4 0.74 PAN GS 025 BGE 150.0 A K1 138 1.3 0.74 PAN GS 025 BPW 150.0 A K1 194 100 M8GA 15B 83 2.1 1.1 PAN GS 025 BGE 100.0 A K1 92 1.9 1.1 PAN GS 025 BPW 100.0 A K1 194 75 M8GA 20B 63 2.9 1.5 PAN GS 025 BGE 075.0 A K1 69 2.6 1.5 PAN GS 025 BPW 075.0 A K1 204 60 M8GA 25B 50 3.6 1.8 PAN GS 025 BGE 060.0 A K1 55 3.2 1.8 PAN GS 025 BPW 060.0 A K1 204 50 M8GA 30B 42 4.3 2.2 PAN GS 025 BGE 050.0 A K1 46 3.8 2.2 PAN GS 025 BPW 050.0 A K1 204 30 M8GA 50B 255 7.1 3.7 PAN GS 025 BGE 030.0 A K1 27.5 6.4 3.7 PAN GS 025 BPW 030.0 A K1 204 20 M8GA 75B* 16.7 7.8 5.2 PAN GS 025 BGE 020.0 A K1 18.3 7.8 5.2 PAN GS 025 BPW 020.0 A K1 204 15 M8GA 100B* 12.5 7.8 6.9 PAN GS 025 BGE 015.0 A K1 13.8 7.8 6.9 PAN GS 025 BPW 015.0 A K1 204 12.5 M8GA 120B* 10.4 7.8 7.8 PAN GS 025 BGE 012.5 A K1 11.5 7.8 7.8 PAN GS 025 BPW 012.5 A K1 204 10 M8GA 150B* 8.3 7.8 7.8 PAN GS 025 BGE 010.0 A K1 9.2 7.8 7.8 PAN GS 025 BPW 010.0 A K1 204 8.3 M8GA 180B* 6.9 7.8 7.8 PAN GS 025 BGE 008.3 A K1 7.6 7.8 7.8 PAN GS 025 BPW 008.3 A K1 204 Geared motor weight = 2.8kg * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48. Motor details: 1 phase rated current 0.25A, starting current 0.43A, rated speed 1250r/min 67 11.5 32 1 26 75 30 BRAKE CABLE 300mm MAX 15 CTRS 4 44 ø30 10ø h7 ø82 (66.5) 4xM5 ON 94 PCD 25 80 7.5 L 130 48 2

geared brake motors 40W braked Brake motors feature a spring applied electromagnetic brake suitable for fast stop and holding torques. The brake is operated from mains supply connections. Up to six stops/starts per minute are possible. Rated 230V ± 10% and 50 Hz 1 phase models intermittent duty S2 3 phase models, continuous duty S1 Enclosure IP44 Class E insulation Supplied phase model supplied with 3.0µF run capcitor Integrates thermal protection switch (For external connection) approved, UL on request M9GA gearbox 33 1 phase Brake Motor 3 phase Brake Motor Model Number : M9RA40GBK4GE Model Number : M9MA40GBK4W1 Nominal Gearbox Actual Rated Braking Actual Rated Braking speed model speed torque torque Assembly speed torque torque Assembly Length r/min number @230V number @230V number L 500 M9GA 3B 392 0.8 0.48 PAN GS 040 BGE 500.0 A L1 458 0.66 0.48 PAN GS 040 BPW 500.0 A L1 227 300 M9GA 5B 235 1.34 0.79 PAN GS 040 BGE 300.0 A L1 275 1.1 0.79 PAN GS 040 BPW 300.0 A L1 227 200 M9GA 7.5B 157 2 1.19 PAN GS 040 BGE 200.0 A L1 183 1.6 1.19 PAN GS 040 BPW 200.0 A L1 227 150 M9GA 10B 118 2.48 1.47 PAN GS 040 BGE 150.0 A L1 138 2 1.47 PAN GS 040 BPW 150.0 A L1 227 100 M9GA 15B 78 3.7 2.2 PAN GS 040 BGE 100.0 A L1 92 3 2.2 PAN GS 040 BPW 100.0 A L1 227 75 M9GA 20B 59 5 2.9 PAN GS 040 BGE 075.0 A L1 69 4 2.9 PAN GS 040 BPW 075.0 A L1 245 60 M9GA 25B 47 5.8 3.7 PAN GS 040 BGE 060.0 A L1 55 5.1 3.7 PAN GS 040 BPW 060.0 A L1 245 50 M9GA 30B 39 7.0 4.4 PAN GS 040 BGE 050.0 A L1 46 6.1 4.4 PAN GS 040 BPW 050.0 A L1 245 30 M9GA 50B* 23.5 9.8 7.3 PAN GS 040 BGE 030.0 A L1 27.5 9.8 7.3 PAN GS 040 BPW 030.0 A L1 245 20 M9GA 75B* 15.7 9.8 9.8 PAN GS 040 BGE 020.0 A L1 18.3 9.8 9.8 PAN GS 040 BPW 020.0 A L1 245 15 M9GA 100B* 11.8 9.8 9.8 PAN GS 040 BGE 015.0 A L1 13.8 9.8 9.8 PAN GS 040 BPW 015.0 A L1 245 12.5 M9GA 120B* 9.8 9.8 9.8 PAN GS 040 BGE 012.5 A L1 11.5 9.8 9.8 PAN GS 040 BPW 012.5 A L1 245 10 M9GA 150B* 7.8 9.8 9.8 PAN GS 040 BGE 010.0 A L1 9.2 9.8 9.8 PAN GS 040 BPW 010.0 A L1 245 8.3 M9GA 180B* 6.5 9.8 9.8 PAN GS 040 BGE 008.3 A L1 7.6 9.8 9.8 PAN GS 040 BPW 008.3 A L1 245 Geared motor weight = 4.0kg * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48. Motor details: 1 phase rated current 0.25A, starting current 0.43A, rated speed 1250r/min 67 13.5 32 27 1 75 30 MAX BRAKE CABLE 300mm ø92 18 CTRS 4 44 ø36 ø12 h7 (73.5) 90 4xM6 ON 104 PCD 25 7.5 L 152 50

60W Braked Motor Brake motors feature a spring applied electromagnetic brake suitable for emergency stop and holding torques. Flanged M9GC gearbox 34 The brake is operated from mains supply connections. Up to six stops/starts per minute are possible. Flanged and square gearboxes are available. 230V 1 phase versions are available for fixed applications. 230V 3 phase versions are available for variable speed applications when used with the Panasonic micro-inverter or Lenze smd inverter. Rated 230V ± 10% and 50 Hz Continuous duty S1 Enclosure IP44 Class E insulation Supplied phase model supplied with 5.0µF run capcitor Integrated thermal protection switch (For external connection) approved, UL on request Square M9GD gearbox Ordering specification and example Replace the letter # from the assembly number with a C for flanged gearbox or D for square gearbox as required. Examples: 100 r/min flanged with 1 phase brake motor PAN GS 060 BGE 100.0 C K1 10 r/min square with 3 phase brake motor PAN GS 060 BPW 010.0 D K1 See page 48 for terminal box positions and feet. 1 phase Brake Motor 3 phase Brake Motor Model Number : M9RC60GBK4GE Model Number : M9MC60GBK4W1 Nominal Gearbox Actual Rated Braking Actual Rated Braking speed model speed torque torque Assembly speed torque torque Assembly Length r/min number @230V number @230V number L 500 M9G# 3B 433 1.1 0.95 PAN GS 060 BGE 500.0 # K1 458 1 0.95 PAN GS 060 BPW 500.0 # K1 274 300 M9G# 5B 260 1.9 1.59 PAN GS 060 BGE 300.0 # K1 275 1.7 1.59 PAN GS 060 BPW 300.0 # K1 274 200 M9G# 7.5B 173 2.9 2.4 PAN GS 060 BGE 200.0 # K1 183 2.5 2.4 PAN GS 060 BPW 200.0 # K1 274 150 M9G# 10B 130 3.5 2.9 PAN GS 060 BGE 150.0 # K1 138 3.1 2.9 PAN GS 060 BPW 150.0 # K1 274 100 M9G# 15B 87 5.3 4.4 PAN GS 060 BGE 100.0 # K1 92 4.6 4.4 PAN GS 060 BPW 100.0 # K1 274 75 M9G# 20B 65 6.6 5.5 PAN GS 060 BGE 075.0 # K1 69 5.7 5.5 PAN GS 060 BPW 075.0 # K1 274 60 M9G# 25B 52 8.2 6.9 PAN GS 060 BGE 060.0 # K1 55 7.2 6.9 PAN GS 060 BPW 060.0 # K1 274 50 M9G# 30B 43 9.9 8.2 PAN GS 060 BGE 050.0 # K1 46 8.6 8.2 PAN GS 060 BPW 050.0 # K1 274 30 M9G# 50B 26 16.5 13.7 PAN GS 060 BGE 030.0 # K1 27.5 14.4 13.7 PAN GS 060 BPW 030.0 # K1 274 20 M9G# 75B* 17.3 19.6 19.1 PAN GS 060 BGE 020.0 # K1 18.3 19.6 19.1 PAN GS 060 BPW 020.0 # K1 274 15 M9G# 100B* 13 19.6 19.6 PAN GS 060 BGE 015.0 # K1 13.8 19.6 19.6 PAN GS 060 BPW 015.0 # K1 274 12.5 M9G# 120B* 10.8 19.6 19.6 PAN GS 060 BGE 012.5 # K1 11.5 19.6 19.6 PAN GS 060 BPW 012.5 # K1 274 10 M9G# 150B* 8.7 19.6 19.6 PAN GS 060 BGE 010.0 # K1 9.2 19.6 19.6 PAN GS 060 BPW 010.0 # K1 274 7.5 M9G# 200B* 6.5 19.6 19.6 PAN GS 060 BGE 007.5 # K1 6.9 19.6 19.6 PAN GS 060 BPW 007.5 # K1 274 HIGHER TORQUES available from 30 r/min and slower, see following 60W high torque pages. Geared motor weight = 4.5kg * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

60W braked 67 5 38 31 29 12 1 75 30 BRAKE CABLE 300mm MAX (73.5) ø34 ø15 h7 17 92 4xM6 ON D 104 PCD 25 274 169 35 90 67 Ø34 5 38 29 25 67 1 75 30 BRAKE CABLE 300mm MAX 17 92 136 18 18 CTRS 44 36 60 ø34 4xø8.5 90 110 130 4 X M6 ON 104 P.C.D. Ø15 h7 7 274 169 1 phase motors 3 phase motors 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1.5 1.25 1.0 0.75 0.5 0.25 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 0 0 250 500 750 1000 1250 1500 1750 2000 Speed (r/min.) Motor speed-torque curve 230 V 230 V Rated current Starting current Input power Rated speed 0.57 A 1.05 A 127 W 1300 r/min Rated current Starting current Input power Rated speed 0.46 A 1.5 A 103 W 1375 r/min

60W HT Braked Motor Brake motors feature a spring applied electromagnetic brake suitable for emergency stop and holding torques. The brake is operated from mains supply connections. Up to six stops/starts per minute are possible. Flanged and square gearboxes are available. Flanged M9GS gearbox 36 230V 1 phase versions are available for fixed applications. 230V 3 phase versions are available for variable speed applications when used with the Panasonic micro-inverter or Lenze smd inverter. Rated 230V ± 10% and 50 Hz Intermittent duty S1 Enclosure IP44 Class E insulation Supplied with 5.0µF run capcitor Single phase models supplied with 5.0µF run capcitor Integrated thermal protection switch (For external connection) approved, UL on request Square M9GT gearbox Ordering specification and example Replace the letter # from the assembly number with a S for flanged gearbox or T for square gearbox as required. Examples: 30 r/min 1 phase flanged brake motor PAN GS 060 BGE 030.0 S K1 7.5 r/min 3 phase square brake motor motor PAN GS 060 BPW 007.5 T K1 See page 48 for terminal box positions and feet. 1 phase Brake Motor 3 phase Brake Motor Model Number : M9RC60BGK4GE Model Number : M9MC60GBK4W1 Nominal Gearbox Actual Rated Braking Actual Rated Braking speed model speed torque torque Assembly speed torque torque Assembly Length r/min number @230V number @230V number L 30 M9G# 50B 26 15.4 13.7 PAN GS 060 BGE 030.0 # K1 27.5 14.4 13.7 PAN GS 060 BPW 030.0 # K1 301 20 M9G# 75B* 17.3 21.5 19.1 PAN GS 060 BGE 020.0 # K1 18.3 19.1 19.1 PAN GS 060 BPW 020.0 # K1 301 15 M9G# 100B* 13 28.6 25.5 PAN GS 060 BGE 015.0 # K1 13.8 25.5 25.5 PAN GS 060 BPW 015.0 # K1 301 12.5 M9G# 120B* 10.8 29.4 29.4 PAN GS 060 BGE 012.5 # K1 11.5 29.4 29.4 PAN GS 060 BPW 012.5 # K1 301 10 M9G# 150B* 8.7 29.4 29.4 PAN GS 060 BGE 010.0 # K1 9.2 29.4 29.4 PAN GS 060 BPW 010.0 # K1 301 7.5 M9G# 200B* 6.5 29.4 29.4 PAN GS 060 BGE 007.5 # K1 6.9 29.4 29.4 PAN GS 060 BPW 007.5 # K1 301 HIGHER SPEEDS see the 60W and 90W selections on adjacent pages Geared motor weight = 4.9kg * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

60W braked high torque 67 5 45 38 12 1 75 30 MAX BRAKE CABLE 300mm 35 ø40 ø18 h7 20.5 ø40 92 30 169 301 37 90 67 Ø40 6 45 88 1 75 30 BRAKE CABLE 300mm MAX 30 7 92 18 136 20.5 18 CTRS 44 36 60 (73.5) 4xø8.5 90 4xM6 ON 104 PCD 110 130 4 HOLES Ø8.5 ON 104 P.C.D. Ø18 h7 35 12 169 301 1 phase motors 3 phase motors 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1.5 1.25 1.0 0.75 0.5 0.25 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 0 0 250 500 750 1000 1250 1500 1750 2000 Speed (r/min.) Motor speed-torque curve 230 V 230 V Rated current 0.57 A Rated current 0.46 A Starting current 1.05 A Starting current 1.5 A Input power 127 W Input power 103 W Rated speed 1300 r/min Rated speed 1375 r/min

90W Braked Motor Brake motors feature a spring applied electromagnetic brake suitable for emergency stop and holding torques. The brake is operated from mains supply connections. Up to six stops/starts per minute are possible. Flanged and square gearboxes are available. Flanged M9GC gearbox 38 230V 1 phase versions are available for fixed applications. 230V 3 phase versions are available for variable speed applications when used with the Panasonic micro-inverter or Lenze smd inverter. Rated 230V ± 10% and 50 Hz 1 phase models intermittent duty S2 3 phase models continuous duty S1 Enclosure IP44 Class E insulation Single phase models supplied with 5.5µF run capcitor Integrated thermal protection switch (For external connection) approved, UL on request Square M9GD gearbox Ordering specification and example Replace the letter # from the assembly number with a C for flanged gearbox or D for square gearbox as required. Examples: 100 r/min flanged with 1 phase brake motor PAN GS 090 BGE 100.0 C K1 7.5 r/min square with 3 phase brake motor PAN GS 090 BPW 007.5 D K1 See page 48 for terminal box positions and feet. 1 phase Brake Motor 3 phase Brake Motor Model Number : M9RC90GBK4GE Model Number : M9MC90GBK4W1 Nominal Gearbox Actual Rated Braking Actual Rated Braking speed model speed torque torque Assembly speed torque torque Assembly Length r/min number @230V number @230V number L 500 M9G# 3B 350 1.85 0.95 PAN GS 090 BGE 500.0 # K1 458 1.4 0.95 PAN GS 090 BPW 500.0 # K1 289 300 M9G# 5B 210 3.1 1.6 PAN GS 090 BGE 300.0 # K1 275 2.4 1.6 PAN GS 090 BPW 300.0 # K1 289 200 M9G# 7.5B 140 4.6 2.4 PAN GS 090 BGE 200.0 # K1 183 3.5 2.4 PAN GS 090 BPW 200.0 # K1 289 150 M9G# 10B 105 5.7 2.9 PAN GS 090 BGE 150.0 # K1 138 4.4 2.9 PAN GS 090 BPW 150.0 # K1 289 100 M9G# 15B 70 10.6 4.4 PAN GS 090 BGE 100.0 # K1 92 6.5 4.4 PAN GS 090 BPW 100.0 # K1 289 75 M9G# 20B 53 13.3 5.5 PAN GS 090 BGE 075.0 # K1 69 8.1 5.5 PAN GS 090 BPW 075.0 # K1 289 60 M9G# 25B 42 16.0 6.9 PAN GS 090 BGE 060.0 # K1 55 10.2 6.9 PAN GS 090 BPW 060.0 # K1 289 50 M9G# 30B 35 19.6 8.2 PAN GS 090 BGE 050.0 # K1 46 12.2 8.2 PAN GS 090 BPW 050.0 # K1 289 30 M9G# 50B* 21 19.6 13.7 PAN GS 090 BGE 030.0 # K1 27.5 19.6 13.7 PAN GS 090 BPW 030.0 # K1 289 20 M9G# 75B* 14 19.6 19.1 PAN GS 090 BGE 020.0 # K1 18.3 19.6 19.1 PAN GS 090 BPW 020.0 # K1 289 15 M9G# 100B* 10.5 19.6 19.6 PAN GS 090 BGE 015.0 # K1 13.8 19.6 19.6 PAN GS 090 BPW 015.0 # K1 289 12.5 M9G# 120B* 8.8 19.6 19.6 PAN GS 090 BGE 012.5 # K1 11.5 19.6 19.6 PAN GS 090 BPW 012.5 # K1 289 10 M9G# 150B* 7 19.6 19.6 PAN GS 090 BGE 010.0 # K1 9.2 19.6 19.6 PAN GS 090 BPW 010.0 # K1 289 7.5 M9G# 200B* 5.3 19.6 19.6 PAN GS 090 BGE 007.5 # K1 6.9 19.6 19.6 PAN GS 090 BPW 007.5 # K1 289 HIGHER TORQUES available from 20 r/min and slower speeds, see previous 60W high torque pages. Geared motor weight = 4.8kg * torque limiter recommended 1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 31.

90W braked 67 5 12 38 1 31 29 75 30 MAX BRAKE CABLE 300mm 92 ø34 ø15 h7 17 25 184 289 39 67 Ø34 5 38 29 25 67 1 75 30 BRAKE CABLE 300mm MAX 17 92 136 18 36 60 (73.5) 18 CTRS 44 4xø8.5 90 110 130 4xM6 ON 104 PCD 4 X M6 ON 104 P.C.D. Ø15 h7 7 289 184 1 phase motors 3 phase motors 1.5 1.0 duty S2 3.0 2.5 2.0 0.5 1.5 1.0 0.5 0 0 500 1000 1500 2000 Speed (r/min.) Motor speed-torque curve 0 0 250 500 750 1000 1250 1500 1750 2000 Speed (r/min) Motor speed-torque curve 230 V 230 V Rated current Starting current Input power Rated speed 0.84 A 1.08 A 194 W 1050 r/min Rated current Starting current Input power Rated speed 0.70 A 2.2 A 145 W 1375r/min

Micro-Inverter The Panasonic Micro-Inverter is suitable for variable speed operation of 230V 3 phase G-series geared motors. The Panasonic Micro-Inverter can be used with any 3 phase motor, rated for 230V operation. Quiet and efficient operation is achieved as a result of the 12 khz IGBT switching frequency. 40 Compact and aesthetic design Simple operation Quick and easy installation approved Front view (cover in place) Features High torque capacity Good speed holding In-built and external stop/start control In-built and external forward/reverse External dynamic braking control Inverter trip output Accel/decel ramp Optional external analogue signal Optional remote speed potentiometer Primary* Fixing hole Secondary Fixing hole * Primary fixing hole for permanent location of inverter front cover to limit access to dip switches and accel/decel potentiometer. Secondary fixing hole to allow access to dip switches and accel/decel potentiometer. Frequency potentiometer for speed setting Status LED Mains power terminals Run/Stop switch Dip switches for parameter settings Motor power connector Earthing point Accel/Decel potentiometer CW/CCW switch or external speed reference input External I/O connector Primary Fixing hole Front view (cover removed) Rear view

Micro-Inverter Standard model XE The XE version has a built-in potentiometer for simple speed control and quick installation. Also incorporated are a standard range of control functions. External speed reference model XEA To allow greater flexibility, the XEA version will accept either an external speed potentiometer or an 0-5V analogue signal. Type Power W Type number Standard model 25-40 PAN GS M1G4A2 V1XE 60-90 PAN GS M1G9A2 V1XE External speed reference model 25-40 PAN GS M1G4A2 V1XEA 60-90 PAN GS M1G9A2 V1XEA 52.5 12.5 105.5 13 60 R Panasonic 41 L1 S L2 POWER SUPPLY 90 80.5 V E W U MOTOR Low STOP High RUN 100 I1 I2 I3 01 COM 60/90W 240V CCW CW Inverter specifications Output ratings Mains supply Control method (131) Rated motor power (W) 25/40 60/90 Output capacity (VA) *1 112/159 195/279 Rated output current (A) 0.28/0.40 0.49/0.70 Rated output voltage *2 Three phase; 200 to 230 V Supply voltage *3 Single phase; 200 to 230 V Voltage tolerance ± 10% Supply frequency 50/60 Hz ± 5% Control method PWM; 12 khz switching frequency Output frequency range *4 1.0 to 120 Hz (factory preset to 60 Hz) Acceleration/deceleration time 0.05 to 30 seconds Overload current rating 150% continuous 200% for 90s Regenerative brake torque *5 100% deceleration torque short term DC brake Braking start frequency: 3 Hz Braking time: 0.5 sec Frequency setting In-built potentiometer (XE) or external control (XEA) In-built controls Start/Stop switch, CW/CCW switch, frequency range, motor thermal overload External control (Inputs) Start/stop, CW/CCW, Coast stop (Output): Trip signal Protective functions Under-voltage, overcurrent, overvoltage, overload, power failure, stall prevention, motor thermal overload Motor thermal overload setting 25 W/40 W 60 W/90 W 4.5 2xø4.5 Ambient conditions Ambient temperature Ambient humidity Atmosphere Enclosure -10 o C to +40 o C Relative humidity 90% max (no condensation) Free from corrosive gas, mist, dust, etc. IP20 * 1: The rated output capacity is based on a rated output voltage of 230V. * 2: The rated output voltage will never exceed the mains supply voltage. * 3: The mains supply voltage should not exceed the rated voltage of the motor * 4: When used with G-Series geared motors, never exceed 60Hz operation. * 5: The regenerative brake torque is not rated for continuous operation. No braking resistor is used.

Micro-Inverter accessories RFI filter To achieve compliance to EN55011 class A (Industrial Installations) or class B (Domestic Installations) it is recommended that an RFI filter is used. Compliance can be achieved for motor cables up to a maximum of 15 metres when the recommended installation procedures are followed. Current rating Weight Type number 2A 0.2 kg PANB1SF1494 2 HOLES 70 Ø4.5 37 21 50.5 42 85 97 6 49 Motor Supply cable Control cable External Speed Reference cable Length (m) Type number 1 PAN GS MIC P1P 2 PAN GS MIC P2P 3 PAN GS MIC P3P 5 PAN GS MIC P5P 10 PAN GS MIC P10P 15 PAN GS MIC P15P Length (m) Type number 1 PAN GS MIC C1P 2 PAN GS MIC C2P 3 PAN GS MIC C3P 5 PAN GS MIC C5P Length (m) Type number 1 PAN GS MIC X1P 2 PAN GS MIC X2P 3 PAN GS MIC X3P 5 PAN GS MIC X5P Ordering example (10) off Panasonic Micro-Inverters Model XE 60-90W, with filter, 5m motor supply and 3m control cables. Type nos. PAN GS M1G 9A2V1 XE PAN B1 SF14 94 PAN GS MIC P5P PAN GS MIC C3P

Micro-Inverters performance The Panasonic Micro-Inverter offers excellent performance characteristics, with a starting torque of 200% motor full load torque achievable. Although designed for use with any 3 phase; 230V motor, the Micro-Inverter is the ideal controller to compliment the Panasonic G-Series geared motor range. See graphs below for speed/torque performance details for the 25W, 40W, 60W and 90W G-Series motors when operated with the Micro-Inverter. 43 25W G-Series 0.5 0.4 Continuous working range 300% 0.3 200% 0.2 0.1 20Hz 30Hz 40Hz 50Hz 60Hz 10Hz 15Hz 100% 5Hz 0 500 1000 1500 1800 Speed (r/min) 60W G-Series 1.0 Continuousworking range 0.8 0.3 0.2 0.1 0 0 3Hz 5Hz 10Hz 200% Continuous working range 0.6 15Hz 20Hz 30Hz 40Hz 50Hz 60Hz 100% 200% 0.6 NM 0.5 0.4 1800 500 1000 1500 Speed (r/min) 0.4 3 15Hz 20Hz 30Hz 40Hz 50Hz 60Hz 5Hz 10Hz 100% 0.2 1 0 0 500 1000 1500 Speed (r/min) 1800 1.2 1.0 0.8 0.6 40W G-Series 90W G-Series 3Hz 0.4 0.2 1Hz 0 0 5Hz 10Hz 200% 20Hz 30Hz 40Hz 50Hz 60Hz Continuous working range 15Hz 100% 500 1000 1500 1800 Speed (r/min) * G-Series geared motors are rated for operation up to 60 Hz. Above 60 Hz performance and lifetime can not be guaranteed.

Standard feet Standard feet are available for all square gearboxes. These can be ordered and fitted to suit the required mounting configuration, see page 48. Flanged geared motors with powers 60-90W do not accept feet. A 44 B J 4 HOLES øv K N 4 HOLES X EQUI-SPACED ON W P.C.D. R P D C L H M Dimensions A B C D H J K L M N P R V W X 6W Feet 12 8 65 35 6 17 34 60 25 3 5.5 6 ø4.8 ø70 M4 15W Feet 13 12 75 40 6 20 40 70 31 3.5 5.5 7 ø4.8 ø82 M5 25W Feet 15 14 85 45 6 23 46 80 35 3.5 7 ø5.5 ø94 M5 40W-90W Feet 20 20 95 50 8 28 56 90 46 3.5 8 ø7 ø104 M6 Ordering 6W type No. 15W type No. PAN GS M6 B2 PAN GS M7 B2 25W type No. PAN GS M8 B2 40-90W type No. PAN GS M9 B2

45 Panasonic G-series Side fixing feet Side fixing feet fit to the front of the gearbox and allow 360 o access to the gearbox shaft. They are available for powers 25W and higher. See page 48 to specify the mounting position required. Flanged geared motors with powers 60W-90W do not accept feet. B S A J K T X Y 4 HOLES Z EQUI-SPACED ON øw PCD N R D E F C L M Dimensions A B C D H J K L M N R S T U W X Y Z 25W Feet 35 9 89 48 8 51 102 128 60 3.5 7 5.4 8.4 54 ø94 90 81 M5 40W-90W Feet 40 9 98.5 53 10 56 112 130 67 3.5 10 5.4 8.4 60 ø104 100 91 M6 Ordering 25W type No. PAN GS M8 B3 40W-90W type No. PAN GS M9 B3

Motor data 46 Standard 1 phase 3 phase Quick 3 phase 3 phase Brake 230V Reversible 230V 400V 1 phase Brake 1 phase Output Rated Rated Rated Rated Starting Starting Model Voltage Freq Power Current Input Speed Torque Current Torque Pull-Out (V) (Hz) (W) (A) Power (W) (r/min) () () () Torque M6IA6G4GE 230 50 6 0.09 20 1225 0.044 0.12 0.047 0.062 M7IA15G4GE 230 50 15 0.15 34 1225 0.11 0.23 0.09 0.14 M8IA25GK4GE 230 50 25 0.23 50 1225 0.18 0.37 0.13 0.23 M9IA40GK4GE 230 50 40 0.36 79 1200 0.31 0.60 0.23 0.39 M9IC60GK4GE 230 50 60 0.51 118 1225 0.47 0.85 0.49 0.68 M9IC90GKG4GE 230 50 90 0.67 153 1325 0.63 1.40 0.49 0.96 M6RA6G4GE 230 50 6 0.1 22 1225 0.044 0.12 0.049 0.065 M7RA15G4GE 230 50 15 0.17 38 1225 0.11 0.24 0.093 0.15 M8RA25GK4GE 230 50 25 0.25 57 1250 0.19 0.43 0.18 0.28 M9RA40GK4GE 230 50 40 0.41 94 1175 0.33 0.63 0.29 0.45 M9RC60GK4GE 230 50 60 0.57 127 1300 0.44 1.05 0.56 0.83 M9RC90GK4GE 230 50 90 0.84 194 1050 0.76 1.08 0.62 0.83 M6RA6GB4GE 230 50 6 0.1 22 1225 0.04 0.12 0.049 0.065 M7RA15GB4GE 230 50 15 0.17 38 1225 0.11 0.24 0.093 0.15 M8RA25GBK4GE 230 50 25 0.25 57 1250 0.19 0.43 0.18 0.28 M9RA40GBK4GE 230 50 40 0.41 94 1175 0.33 0.63 0.29 0.45 M9RA60GBK4GE 230 50 60 0.57 127 1300 0.44 1.05 0.56 0.83 M9RA90GBK4GE 230 50 90 0.84 194 1050 0.76 1.08 0.62 0.83 M8MA25GK4CE1 400 50 25 0.12 51 1350 0.17 0.31 0.56 0.56 M9MA40GK4CE1 400 50 40 0.15 62 1375 0.26 0.46 0.72 0.72 M9MA60GK4CE1 400 50 60 0.21 94 1375 0.41 0.70 1.05 1.05 M9MA90GK4CE1 400 50 90 0.3 132 1375 0.58 0.95 1.56 1.56 M8MA25GKP4W1 400 50 25 0.26 53 1375 0.17 0.68 0.65 0.65 M9MA40GKP4W1 400 50 40 0.33 70 1375 0.27 1.00 0.88 0.88 M9MA60GKP4W1 400 50 60 0.46 103 1375 0.41 1.50 1.11 1.11 M9MA90GKP4W1 400 50 90 0.7 145 1375 0.62 2.20 1.96 1.96 M8MA25GBKP4W1 400 50 25 0.27 54 1375 0.17 0.67 0.66 0.66 M9MA40GBKP4W1 400 50 40 0.32 66 1375 0.27 1.10 0.78 0.78 M9MA60GBKP4W1 400 50 60 0.46 100 1375 0.41 1.50 1.18 1.18 M9MA90GBKP4W1 400 50 90 0.65 145 1400 0.62 2.20 1.96 1.96 Model Brake Brake Brake Capacitor Rating Duty Insulation Thermal Current Input Holding (uf/v) (IP) Class Switch (A) Power (W) Torque () M6IA6G4GE 0.6 430 20 S1 E No n/a n/a n/a M7IA15G4GE 1.0 430 54 S1 E Yes n/a n/a n/a M8IA25GK4GE 1.5 430 54 S1 E Yes n/a n/a n/a M9IA40GK4GE 2.5 430 54 S1 E Yes n/a n/a n/a M9IC60GK4GE 4.0 430 54 S1 E Yes n/a n/a n/a M9IC90GKG4GE 4.5 430 54 S1 E Yes n/a n/a n/a M6RA6G4GE 0.6 430 20 S2* E No n/a n/a n/a M7RA15G4GE 1.2 430 50 S2* E Yes n/a n/a n/a M8RA25GK4GE 1.8 430 54 S2* E Yes n/a n/a n/a M9RA40GK4GE 3.0 430 54 S2 E Yes n/a n/a n/a M9RC60GK4GE 5.0 430 54 S2* E Yes n/a n/a n/a M9RC90GK4GE 5.5 430 54 S2 E Yes n/a n/a n/a M6RA6GB4GE 0.6 430 20 S2* E No 0.03 4 0.05 M7RA15GB4GE 1.2 430 20 S2* E Yes 0.04 5 0.08 M8RA25GBK4GE 1.8 430 44 S2* E Yes 0.04 6 0.10 M9RA40GBK4GE 3.0 430 44 S2* E Yes 0.07 9 0.20 M9RA60GBK4GE 5.0 430 44 S2* E Yes 0.08 11 0.39 M9RA90GBK4GE 5.5 430 44 S2 E Yes 0.08 11 0.39 M8MA25GK4CE1 n/a 54 S1 E Yes n/a n/a n/a M9MA40GK4CE1 n/a 54 S1 E Yes n/a n/a n/a M9MA60GK4CE1 n/a 54 S1 E Yes n/a n/a n/a M9MA90GK4CE1 n/a 54 S1 E Yes n/a n/a n/a M8MA25GKP4W1 n/a 54 S1 E Yes n/a n/a n/a M9MA40GKP4W1 n/a 54 S1 E Yes n/a n/a n/a M9MA60GKP4W1 n/a 54 S1 E Yes n/a n/a n/a M9MA90GKP4W1 n/a 54 S1 E Yes n/a n/a n/a M8MA25GBKP4W1 n/a 44 S1 E Yes 0.03 5 0.1 M9MA40GBKP4W1 n/a 44 S1 E Yes 0.08 8 0.2 M9MA60GBKP4W1 n/a 44 S1 E Yes 0.08 8 0.39 M9MA90GBKP4W1 n/a 44 S1 E Yes 0.08 8 0.39 * Duty rating becomes S1 when combined with Panasonic gearbox. Standard 1 phase 3 phase Quick 3 phase 3 phase Brake 230V Reversible 230V 400V 1 phase Brake 1 phase

Part Number Breakdown Motor M G 4 * Frame size 6 7 8 9 60mm 70mm 80mm 90mm Gearbox I M R Type 1 phase 3 phase Quick reversible or braked Output A 6-40W C 60-90W Power (W) 6 1 5 2 5 4 0 6 0 9 0 Specification K B Terminal box Braked Omit character if leadwire G 4 C Voltage E W E 1 1 1ph 230V 3ph 230V 3ph 400V * optional character Example 6W 1 phase 230V brake motor M6RA6GB4GE M G B * * Frame size 6 60mm 7 70mm 8 80mm 9 90mm A D T C S Gearbox type 6-40W Square 60-90W Square 60-90W Square H/T 60-90W Flanged 60-90W Flanged H/T Gear ratio i 3 5 7. 5 1 0 1 0 2 0 2 5 3 0 5 0 7 5 1 0 0 1 2 0 1 5 0 1 8 0 2 0 0 Example 60W flanged high torque with i = 75 M9GS75B * optional character Decimal Gearbox (required in addition for speeds 7.5 r/min and below) M G 1 0 Example 90W decimal gearbox M9GC10XB Frame size 6 60mm 7 70mm 8 80mm 9 90mm Output A 6-40W C 60-90W X X M B Bearing type Sintered 6-40W Ball 60-90W

Ordering fast and simple Panasonic G-series geared motors are built to order from our extensive stocks of motors and gearheads. Fast shipment is normal and same day shipment is often possible. When placing an order, please state the type number, quantity required, gearbox mounting position and foot mounting position (if required). See page 48 for details. 48 50 Ordering examples: G-series geared motor, standard induction 1 phase 6W, output speed of 50 r/min, lead wire position 2. Type number PAN GS 006 IGE 050.0 AL2 G-series geared motor, 3 phase 400V high torque 60W with square gearhead, PAN GS 060 MCE 002.0 TKA output speed 2 r/min, terminal box position 1, foot position 1 (specify standard or side feet) - Micro-inverter PAN GS M1G 9A2XE - RFI filter PAN B1 SF 1494 - Motor cables - 3m PAN GS MIC P3P - Control cables - 3m PAN GS MIC C3P - External speed reference cable - 3m(only used with PANGSM1G4A2 V1XEA or PAN GS MIC X3P PAN GS M1 G9A2 V1XEA) Other products available from Panasonsic B-series A-series S-series For European sales & service addresses see our website www.lenze.co.uk Lenze Ltd Caxton Rd Bedford MK41 0TS United Kingdom Tel: +44 (0)1234 321321 Email: sales@lenze.co.uk UKGSERIES0905