Solderless terminals RING ONGU (R type) Non-insulated ile No.: 2 R 70021 Refer to page 13 for 2 to (0.2 to 0.) to (0.2 to 1.) to (1.0 to 2.3) Metric JS JIS 2 0.-2 3 0.-3 3. 0.-3.7 0.- 0.- 2 1.2-2 3 1.2-3 R1.2-3 3 1.2-MS3 3 1.2-M3.3 3 1.2-3 3. 1.2-3.7 3. 1.2-M3 R1.2-3. 3. 1.2-3.7 1.2-M 1.2- R1.2-1.2- R1.2-1.2-NS 1.2-1.2 1.2-9 1.2-9 1.2-1.2-2 2-S2 3 2-MS3 3 2-S3.3 3 2-M3.3 3 2-3 3. 2-S3 3. 2-M3 R2-3. 3. 2-P3. 3. 2-3.7 2-M 2-P 2- R2-2-M 2-NS 2- R2-2- R2-2- R2-9 2-9 2-2- 2-2- 2- American 1-2 1-2 / 3/ 3/ 1-2 / 3/ 3/ / 2.2 (.07).2 (.). (.). (.) 3.2 (.).2 (.). (.). (.) YH-2.0 2.0 1.0 0. YA-1 3.7 (.). (.) 1.0 (.91) 7.7 (.303) (.17) (.079) (.039) (.0) YA-2.3 (.9). (.) 1.0 (.91) 7.7 (.303) C-0.3 (.9).0 (.31) 1.0 (.91) 7.0 (.27) 2.2 (.07). (.217). (.3).0 (.17) 3.2 (.). (.217). (.3).0 (.17) 3.2 (.). (.217) 13.2 (.). (.2) 3.2 (.). (.). (.7).3 (.2) 3.2 (.).0 (.31) 1. (.) 7.0 (.27) 3.7 (.). (.217). (.3).0 (.17) 3.7 (.). (.). (.7).3 (.2) 3.7 (.).0 (.31) 1. (.) 7.0 (.27) YH- YA-1.3 (.9). (.). (.7).3 (.2). 3. 1.7 0. YA-2.3 (.9).0 (.31) 1. (.) 7.0 (.27) (.19) (.13) (.07) (.031).3 (.9).0 (.31) 1. (.) 7.0 (.27) C-0.3 (.9) 9.0 (.3). (.03).1 (.37).3 (.9). (.7) 21.7 (.).1 (.37). (.22). (.7) 21.7 (.).1 (.37). (.331). (.7) 21.7 (.).1 (.37) 9. (.3) 13. (.3) 2.(1.00) 13.9 (.7). (.13) 13. (.3) 2.(1.00) 13.9 (.7) 13.0 (.) 19.0 (.7) 31.0(1.2).7 (.7) 2.2 (.07). (.22).3 (.).3 (.9) 3.2 (.). (.217) 13.2 (.). (.2) 3.2 (.). (.22).3 (.).3 (.9) 3.2 (.). (.). (.7).3 (.2) 3.2 (.). (.33). (.1) 7. (.307) 3.7 (.). (.22).3 (.).3 (.9) 3.7 (.). (.). (.7).3 (.2) 3.7 (.) 7.0 (.27).0 (.30) 7.7 (.303) 3.7 (.). (.33). (.1) 7. (.307).3 (.9). (.). (.7).3 (.2) YH-.3 (.9) 7.0 (.27).0 (.30) 7.7 (.303) YA-1..1 2.3 0..3 (.9). (.33). (.1) 7. (.307) YA-2 (.19) (.1) (.091) (.031).3 (.9). (.33). (.1) 7. (.307).3 (.9) 9.0 (.3).3 (.799).0 (.33) C-0.3 (.9) 9. (.37). (.1) 7.3 (.27). (.22).0 (.72) 21. (.).0 (.33). (.331).0 (.72) 21. (.).0 (.33) 9. (.3) 13. (.3) 2.(1.00) 13.9 (.7). (.13) 13. (.3) 2.(1.00) 13.9 (.7) 13.0 (.) 19.0 (.7) 31.0(1.2).7 (.7) 1.0 (.91) 27.0(1.03) 39.(1.) 21.2 (.3) 17.0 (.9) 27.0(1.03) 39.(1.) 21.2 (.3) 21.0 (.27) 27.0(1.03) 39.(1.) 21.2 (.3) Note:1) Products with the JIS mark conform to JIS C. 2) he part numbers indicated in the above table are for products with a brazed seam. When ordering products with a nominal size of 0. to. with a butted seam, add the prefix "WS" to the part number (ex.2- >WS2-).
Refer to page 13 for to (3.) to (2.3 to.) American / / 3/ 3/ 3/ / / Metric 3 3 3 3. 3. 9 1 JS 3.-R3 3.-R 3.- 3.-R 3.- 3.-.-S3.3.-3.-S3.-3.7.-S.-NS.-.-NS.-.-S.NS..-S.-.-S.-.-9.-.-.-.-.-.-1.- JIS R.- R.- R. R.- R.- 3.2 (.).0 (.31) 17. (.707) 9.0 (.3).3 (.9).0 (.31) 17. (.707) 9.0 (.3).3 (.9).3 (.0) 1. (.732). (.339).. 2.7 1.0 YH-.3 (.9).0 (.31) 17. (.707) 9.0 (.3) (.19) (.19) (.) (.039) (Dies mark. ) C-0.3 (.9).3 (.0) 1. (.732). (.339). (.22).3 (.0) 1. (.732). (.339) 3.2 (.) 7.2 (.23) 1.7 (.1).9 (.232).2 (.2) 3.2 (.) 9. (.37) 19. (.70).3 (.327). (.2) 3.7 (.) 7.2 (.23) 1.7 (.1).9 (.232).2 (.2) 3.7 (.) 9. (.37) 19. (.70).3 (.327). (.2).3 (.9) 7.2 (.23) 1.7 (.1).9 (.232).2 (.2).3 (.9).0 (.31) 19.1 (.72).3 (.327).3 (.9) 9. (.37) 19. (.70).3 (.327).3 (.9).0 (.31) 19.1 (.72).3 (.327).3 (.9) 9. (.37) 19. (.70).3 (.327).3 (.9) 13.2 (.). (.2) 9.0 (.3). (.22) 9.0 (.3) 2.3 (.97) 13.0 (.) YH- YA-1. (.22).0 (.72) 2.(1.0) 13.0 (.). 3. 1.0 YA-2. (.22) 13.2 (.). (.2) 9.0 (.3) (.2) (.13) (.039). (.22) 1.0 (.91) 2.0(1.2) 13.7 (.39) C-0.. (.331) 13.2 (.). (.2) 9.0 (.3) (.2). (.331) 1.0 (.91) 2.0(1.2) 13.7 (.39) 9. (.3) 1.0 (.91) 2.0(1.2) 13.7 (.39). (.13) 1.0 (.91) 2.0(1.2) 13.7 (.39). (.13) 19.2 (.7) 32.(1.27).0 (.30) 13.0 (.) 19.2 (.7) 32.(1.27).0 (.30) 1.0 (.91).1(1.9) 2.3 (.99) 17.0 (.9).1(1.9) 2.3 (.99) 19.0 (.7).1(1.9) 2.3 (.99) 0 21.0 (.27).1(1.9) 2.3 (.99) Note:1) Products with the JIS mark conform to JIS C. 2) he part numbers indicated in the above table are for products with a brazed seam. When ordering products with a nominal size of 0. to. with a butted seam, add the prefix "WS" to the part number (ex..- >WS.-).
Solderless terminals RING ONGU (R type) Non-insulated Refer to page 13 to 13 for American Metric JS JIS -NK.3 (.9) 9.0 (.3). (.0). (.).2 (.2) YH-S YP-0N Y-1 Y-0-1 - (Note 2) (. to.2) -NS.3 (.9).0 (.31) 21. (.) 9.3 (.3). (.33) -.3 (.9).0 (.72) 23. (.937) 9.3 (.3). (.33) -NK.3 (.9) 9.0 (.3). (.0). (.).2 (.2) -NS.3 (.9) 9.0 (.3).3 (.7) 9.3 (.3) - R-.3 (.9).0 (.72) 23. (.937) 9.3 (.3) -NS.3 (.9) 9.0 (.3) 2.(1.0) 13. (.3) -.3 (.9) 1.0 (.91) 29.(1.173) 13. (.3) -NS. (.22) 9. (.37). (.90) 9.3 (.3) - R-. (.22).0 (.72) 23. (.937) 9.3 (.3) -. (.22) 1.0 (.91) 29.(1.173) 13. (.3) / -NS. (.331). (.3) 2.1(1.) 13. (.3) / - R-. (.331) 1.0 (.91) 29.(1.173) 13. (.3) 3/ 9-9 9. (.3) 1.0 (.91) 29.(1.173) 13. (.3). (.33) 3/ - R-. (.13) 1.0 (.91) 29.(1.173) 13. (.3) 3/ -. (.13).0 (.77) 33.(1.319) 1.0 (.91) -. (.3).0 (.77) 33.(1.319) 1.0 (.91) - 13.0 (.).0 (.77) 33.(1.319) 1.0 (.91) - 1.0 (.91) 31.(1.2) 0.0(1.99) 2.7(1.0) / - 17.0 (.9) 31.(1.2) 0.0(1.99) 2.7(1.0) / 1-1 19.0 (.7) 31.(1.2) 0.0(1.99) 2.7(1.0) - 21.0 (.27) 31.(1.2) 0.0(1.99) 2.7(1.0) Note:1) Products with the JIS mark conform to JIS C. 2) Please use the die AD-901S for the pneumatic tool, and the die NK- for the hydraulic tools YP-0-21/Y-0-1. 7.1 (.). (.177) 1.2 (.07) YH-S, YA- YP-0N C-0 C-0N C-10 Y-1 Y-0-1 - Y-10-1 YH-S YP-0N Y-1 Y-0-1 - (Note 2) YH-S YA- YP-0N C-0 C-0N C-10 Y-1 Y-0-1 - Y-10-1 0 13
Refer to page 13 for American Metric JS JIS -.3 (.9).0 (.72) -NK.3 (.9).2 (.0) -NS.3 (.9) 9.0 (.3) - R-.3 (.9).0 (.72) -NK.3 (.9).2 (.0) -NS. (.22) 9. (.37) - R-. (.22).0 (.72) -. (.22).0 (.30) / -NS. (.331). (.3) / -S. (.331).0 (.72) (.2 to / - R-. (.331).0 (.30).7) 3/ 9-9 9. (.3).0 (.30) 3/ - R-. (.13).0 (.30) 3/ -. (.13).0 (.) -. (.3).0 (.) - R- 13.0 (.).0 (.) - R- 1.0 (.91) 30.0(1.) / - 17.0 (.9) 31.(1.2) / 1-1 19.0 (.7) 31.(1.2) - 21.0 (.27) 31.(1.2) -NS.3 (.9) 9. (.37) -S.3 (.9).0 (.72) -.3 (.9). (.0) -S. (.22).0 (.72) - R-. (.22). (.0) / -S. (.331).0 (.27) / - R-. (.331). (.0) 3/ 9-9 9. (.3) 17. (.9) (.7 to 3/ -S. (.13). (.0) 2.) 3/ - R-. (.13) 17. (.9) -. (.3).0 (.) - R- 13.0 (.).0 (.) - R- 1.0 (.91) 30.0(1.) / - 17.0 (.9) 30.0(1.) / 1-1 19.0 (.7) 30.0(1.) - 21.0 (.27) 30.0(1.) Note:1) Products with the JIS mark conform to JIS C. 2) Delivery lead times may vary depending on the product. Contact JS for details. 29.(1.173) 13.3 (.2). (.13) 23.0 (.90) 7.7 (.303) 9.2 (.32) 0 2.3(1.1) 13.3 (.2) 29.(1.173) 13.3 (.2). (.13) 0 23.0 (.90) 7.7 (.303) 9.2 (.32) 0 2.(1.) 13.3 (.2) 0 29.(1.173) 13.3 (.2) 32.(1.291). (.71) YA- 0 30.(1.213). (.71) YP-0N 31.0(1.2). (.71) 9.0. 1. 32.(1.291). (.71) (.3) (.) (.09) C-0 C-0N 32.(1.291). (.71). C-10 32.(1.291). (.71) (.13) Y-1 Y-0-1 1.0(1.) 19. (.739) - Y-10-1 0 1.0(1.) 19. (.739) 1.0(1.) 19. (.739) 9.0(1.929) 23. (.92) 1.(2.02) 2.2 (.992) 1.(2.02) 2.2 (.992) 1.(2.02) 2.2 (.992) 2.7(1.130).0 (.72) 30.0(1.).0 (.72) 33.7(1.327) 13. (.31) 30.0(1.).0 (.72) 33.7(1.327) 13. (.31) 30.0(1.).0 (.72) YA- 33.7(1.327) 13. (.31) YP-0N 3.7(1.).0 (.30).0. 7.7 1. C-0N 33.7(1.327) 13. (.31) (.72) (.3) (.303) (.071) C-10 3.7(1.).0 (.30) Y-1 Y-0-1 0 2.(1.73) 19. (.7) - Y-10-1 2.(1.73) 19. (.7) 1.(2.02) 2. (.9) 1.(2.02) 2. (.9) 1.(2.02) 2. (.9) 1.(2.02) 2. (.9)
Solderless terminals RING ONGU (R type) Non-insulated Refer to page 137 for (except for 3-S9) American Metric JS JIS 3-S.3 (.9) 1. (.) 3-.3 (.9).0 (.) 3-S. (.22) 1. (.) 3-. (.22).0 (.) / 3-S. (.331) 1. (.) / 3- R3-. (.331).0 (.) / 3-. (.331) 30.0(1.) 3/ 9 3-9 9. (.3).0 (.) 2 3/ 9 3-S9 9. (.3) 27.0(1.03) (2. to 3/ 3-S. (.13) 1. (.) 2.2) 3/ 3- R3-. (.13).0 (.) 3/ 3-. (.13) 30.0(1.) 3-. (.3).0 (.) 3- R3-13.0 (.).0 (.) 3- R3-1.0 (.91) 30.0(1.) / 3-17.0 (.9) 30.0(1.) / 1 3-1 19.0 (.7) 30.0(1.) 3-21.0 (.27) 30.0(1.) 0-S0.0 (.) 0-S. (.22).0 (.30) 0-. (.22).0 (.) / 0-S. (.331).0 (.30) / 0- R0-. (.331).0 (.) 3/ 9 0-9 9. (.3).0 (.) 1/0 3/ 0-S. (.13).0 (.30) (2.2 to 3/ 0- R0-. (.13).0 (.) 0.7) 0-. (.3).0 (.) 0- R0-13.0 (.).0 (.) 0- R0-1.0 (.91) / 0-17.0 (.9) / 1 0-1 19.0 (.7) 0-21.0 (.27) 7/ 0-23.0 (.90) 70-. (.22) 2.0 (.9) / 70-. (.331) 2.0 (.9) 3/ 9 70-9 9. (.3) 2.0 (.9) 3/ 70-. (.13) 2.0 (.9) 2/0 70-. (.3) 2.0 (.9) (0.7 to 70-13.0 (.) 2.0 (.9) 7.2) 70-1.0 (.91) / 70-17.0 (.9) / 1 70-1 19.0 (.7) 70-21.0 (.27) 7/ 70-23.0 (.90) Note:1) Products with the JIS mark conform to JIS C. 2) Part numbers containing "S0" or "0" do not have stud holes. 3.0(1.9).0 (.30) 2.7(1.1) 17.7 (.97) 3.0(1.9).0 (.30) 2.7(1.1) 17.7 (.97) 3.0(1.9).0 (.30) 2.7(1.1) 17.7 (.97) 2.(2.07) 23. (.92) YA- 2.7(1.1) 17.7 (.97) YP-0N 3.0(1.9).0 (.30).0 13.3 9. 1. C-0N 0 3.0(1.9).0 (.30) (.1) (.2) (.370) (.071) C-10 2.7(1.1) 17.7 (.97) Y-1 Y-0-1 2.(2.07) 23. (.92) - Y-10-1 2.7(1.1) 17.7 (.97) 2.7(1.1) 17.7 (.97) 2.(2.07) 23. (.92) 2.(2.07) 23. (.92) 2.(2.07) 23. (.92) 2.(2.07) 23. (.92) 9.7(1.97).7 (.1).7(1.39).7 (.1) 9.7(1.97).7 (.1).7(1.39).7 (.1) YA- 9.7(1.97).7 (.1) YP-0N 9.7(1.97).7 (.1).7(1.39).7 (.1) C-0N 1.0 1.. 2.0 9.7(1.97).7 (.1) C-10 (.709) (.) (.9) (.079) 0 9.7(1.97).7 (.1) Y-1 Y-0-1 9.7(1.97).7 (.1) - Y-10-1 Y-300-1 7.(2.2) 23. (.92) Y-300N 7.(2.2) 23. (.92) 7.(2.2) 23. (.92) 7.(2.2) 23. (.92) 7.(2.2) 23. (.92) 1.0(2.00).0 (.77) 1.0(2.00).0 (.77) 1.0(2.00).0 (.77) 1.0(2.00).0 (.77) 1.0(2.00).0 (.77) C-10 19.0 17. 13.3 2.0 1.0(2.00).0 (.77) Y-1 Y-10-1 (.7) (.9) (.2) (.079) 2 - Y-300-1 1.0(2.02) 2.0(1.02) Y-300N 1.0(2.02) 2.0(1.02) 1.0(2.02) 2.0(1.02) 1.0(2.02) 2.0(1.02) 1.0(2.02) 2.0(1.02) 1
Refer to page 137 to 13 for American Metric JS JIS / / 0-S0 0-0 0-0- 0-. (.22). (.331). (.331) 27.0(1.03) 27.0(1.03) 27.0(1.03).2(2.13).0(2.77).2(2.13).2(2.13).0(2.77).7 (.1).7 (.1).7 (.1) 3/ 9 0-9 9. (.3) 27.0(1.03).2(2.13).7 (.1) 3/ 0-. (.13) 27.0(1.03).2(2.13).7 (.1) C-10 3/0 3/ 0-. (.13).0(2.77).0 19.. 2.3 Y-1 Y-10-1 0-. (.3) 27.0(1.03).2(2.13).7 (.1) (.77) (.7) (.71) (.091) 2 (7.2 to - Y-300-1 9.3) 0-13.0 (.) 27.0(1.03).2(2.13).7 (.1) Y-300N / / 7/ / / 1 0-0- 0-0-1 0-0- 0-S0 0-0 0-0- 0-13.0 (.) 1.0 (.91) 17.0 (.9) 19.0 (.7) 21.0 (.27) 23.0 (.90). (.22). (.331). (.331) 2.(1.2) 2.(1.2) 2.(1.2).0(2.77).0(2.77).0(2.77).0(2.77).0(2.77).0(2.77).(2.19) 9.0(2.717).(2.19).(2.19) 9.0(2.717). (.03). (.03). (.03) 3/ 9 0-9 9. (.3) 2.(1.2).(2.19). (.03) 3/ 0- R0-. (.13) 2.(1.2).(2.19). (.03) /0 C-10 3/ 0-. (.13) 9.0(2.717) 21.0.3. 2. (9.3 to Y-1 Y-10-1 0-. (.3) 2.(1.2).(2.19). (.03) (.27) (.7) (.) (.2) 7.2) - Y-300-1 0- R0-13.0 (.) 2.(1.2).(2.19). (.03) Y-300N 2 / / 7/ 1 0-0- 0-0-1 0-0- R0- R0- R0-1 R0-13.0 (.) 1.0 (.91) 17.0 (.9) 19.0 (.7) 21.0 (.27) 23.0 (.90) 9.0(2.717) 9.0(2.717) 9.0(2.717) 9.0(2.717) 9.0(2.717) 9.0(2.717) Note:1) Products with the JIS mark conform to JIS C. 2) Part numbers containing "S0" or "0" do not have stud holes.
Solderless terminals RING ONGU (R type) Non-insulated Refer to page 13 for 20/300 (7.2 to 12.0) 30 (12.0 to 192.0) Metric American / / 3/ 3/ 3/ 3/ / / / / 7/ 1/ 1 / / 3/ 3/ / / / 7/ 1/ 1 9 1 2 27 1 2 27 10-S0 3.0(1.17).0(2.00) 23.0 (.90) 10-0 3.0(1.17) 1.0(3.19) 3.0(1.17) 10-. (.22) 3.0(1.17).0(2.00) 23.0 (.90) 10-. (.331) 3.0(1.17).0(2.00) 23.0 (.90) 10-. (.331) 3.0(1.17) 1.0(3.19) 3.0(1.17) 10-9 9. (.3) 3.0(1.17).0(2.00) 23.0 (.90) R10-. (.13) 3.0(1.17).0(2.00) 21.0 (.27) 10-. (.13) 3.0(1.17).0(2.00) 23.0 (.90) 10-. (.13) 3.0(1.17) 1.0(3.19) 3.0(1.17) 10-. (.3) 3.0(1.17).0(2.00) 23.0 (.90) C-10 R10-13.0 (.) 3.0(1.17).0(2.00) 21.0 (.27) 27.0 2. 19. 3.2 Y-1 Y-10-1 10-13.0 (.) 3.0(1.17).0(2.00) 23.0 (.90) (1.03) (1.03) (.7) (.) - Y-300-1 10-13.0 (.) 3.0(1.17) 1.0(3.19) 3.0(1.17) Y-300N R10-1.0 (.91) 3.0(1.17).0(2.77) 23.0 (.90) 10-17.0 (.9) 3.0(1.17).0(2.00) 23.0 (.90) R10-17.0 (.9) 3.0(1.17).0(2.77) 23.0 (.90) 10-17.0 (.9) 3.0(1.17) 1.0(3.19) 3.0(1.17) R10-1 19.0 (.7) 3.0(1.17) 1.0(3.19) 3.0(1.17) R10-21.0 (.27) 3.0(1.17) 1.0(3.19) 3.0(1.17) 10-23.0 (.90) 3.0(1.17) 1.0(3.19) 3.0(1.17) 10-2 2.0 (.9) 3.0(1.17) 1.0(3.19) 3.0(1.17) 10-27 2.0(1.2) 3.0(1.17) 1.0(3.19) 3.0(1.17) -S0 3.(1.) 9.0(2.717) 2. (.9) -0 3.(1.).(3.17) 39.0(1.3) -. (.331) 3.(1.) 9.0(2.717) 2. (.9) -. (.331) 3.(1.).(3.17) 39.0(1.3) -. (.13) 3.(1.) 9.0(2.717) 2. (.9) -. (.13) 3.(1.).(3.17) 39.0(1.3) -. (.3) 3.(1.) 9.0(2.717) 2. (.9) - 13.0 (.) 3.(1.) 9.0(2.717) 2. (.9) 2. 2. 21.0 3. Y-1 Y-300-1 - 13.0 (.) 3.(1.).(3.17) 39.0(1.3) (1.2) (1.2) (.27) (.13) - Y-300N - 1.0 (.91) 3.(1.) 9.0(2.717) 2. (.9) - 17.0 (.9) 3.(1.).(3.17) 39.0(1.3) - 17.0 (.9) 3.(1.) 9.0(2.717) 2. (.9) -1 19.0 (.7) 3.(1.).(3.17) 39.0(1.3) - 21.0 (.27) 3.(1.).(3.17) 39.0(1.3) - 23.0 (.90) 3.(1.).(3.17) 39.0(1.3) -2 2.0 (.9) 3.(1.).(3.17) 39.0(1.3) -27 2.0 (1.2) 3.(1.).(3.17) 39.0(1.3) Note:1) Products with the JIS mark conform to JIS C. 2) Part numbers containing "S0" or "0" do not have stud holes. 17
Refer to page 139 to 0 for 00 (192.0 to 22.27) N.A. (20) 00/0 (22.27 to 32) Metric American / / 3/ 3/ 3/ / / / / 7/ 1/ 1 / / / 3/ 3/ / / / / / 7/ 1/ 1 9 1 2 27 1 1 2 27 0-S0.0(1.732) 72.0(2.3) 2. (.9) 0-0.0(1.732) 91.0(3.3) 37.(1.7) 0-. (.331).0(1.732) 72.0(2.3) 2. (.9) 0-. (.331).0(1.732) 91.0(3.3) 37.(1.7) 0-9 9. (.3).0(1.732) 72.0(2.3) 2. (.9) 0-. (.13).0(1.732) 72.0(2.3) 2. (.9) 0-. (.13).0(1.732) 91.0(3.3) 37.(1.7) 0-. (.3).0(1.732) 72.0(2.3) 2. (.9) 0-13.0 (.).0(1.732) 72.0(2.3) 2. (.9) R0-13.0 (.).0(1.732) 7.0(3.071) 2. (.9) 31. 32.7 2.0.0 Y-1 Y-300-1 0-13.0 (.).0(1.732) 91.0(3.3) 37.(1.7) (1.20) (1.27) (.9) (.17) - Y-300N 0-1.0 (.91).0(1.732) 72.0(2.3) 2. (.9) R0-1.0 (.91).0(1.732) 7.0(3.071) 2. (.9) 0-17.0 (.9).0(1.732) 72.0(2.3) 2. (.9) R0-17.0 (.9).0(1.732) 7.0(3.071) 2. (.9) 0-17.0 (.9).0(1.732) 91.0(3.3) 37.(1.7) R0-1 19.0 (.7).0(1.732) 91.0(3.3) 37.(1.7) R0-21.0 (.27).0(1.732) 91.0(3.3) 37.(1.7) R0-23.0 (.90).0(1.732) 91.0(3.3) 37.(1.7) R0-2 2.0 (.9).0(1.732) 91.0(3.3) 37.(1.7) R0-27 2.0(1.2).0(1.732) 91.0(3.3) 37.(1.7) 20-13.0 (.) 20- Y-1 Y-300-1 1.0 (.91).0(1.732) 7.0(3.071) 2. (.9) 31. 3. 2.0. (1.20) (1.02) (1.02) (.177) - Y-300N 20-17.0 (.9) 32-S0 0.(1.9).0(3.) 33.(1.319) 32-0 0.(1.9).7(.1).0(1.772) 32-. (.331) 0.(1.9).0(3.) 33.(1.319) 32-. (.331) 0.(1.9).7(.1).0(1.772) 32-. (.13) 0.(1.9).0(3.) 33.(1.319) 32-. (.13) 0.(1.9).7(.1).0(1.772) 32-. (.3) 0.(1.9).0(3.) 33.(1.319) 32-13.0 (.) 0.(1.9).0(3.) 33.(1.319) 32-13.0 (.) 0.(1.9).7(.1).0(1.772) 3. 37. 2.0. Y-1 Y-300-1 32-1.0 (.91) 0.(1.9).0(3.) 33.(1.319) (1.39) (1.0) (1.2) (.177) - Y-300N 32-17.0 (.9) 0.(1.9).0(3.) 33.(1.319) R32-17.0 (.9) 0.(1.9) 9.2(3.709) 33.(1.319) 32-17.0 (.9) 0.(1.9).7(.1).0(1.772) 32-M1 19.0 (.7) 0.(1.9) 9.2(3.709) 33.(1.319) R32-1 19.0 (.7) 0.(1.9).7(.1).0(1.772) R32-21.0 (.27) 0.(1.9).7(.1).0(1.772) R32-23.0 (.90) 0.(1.9).7(.1).0(1.772) R32-2 2.0 (.9) 0.(1.9).7(.1).0(1.772) R32-27 2.0(1.2) 0.(1.9).7(.1).0(1.772) conform to JIS C. Note:1) Products with the JIS mark 2) Part numbers containing "S0" or "0" do not have stud holes. 1