Shuriken Power Cells are engineered for today s high-performance mobile audio systems. Utilizing Shuriken s Absorbed Glass Mat (AGM) technology, these rechargeable power cells can be mounted in any position and will not spill. The power cells are extremely resistant to excessive heat and strong vibration. They can be discharged and recharged hundreds of times. ith super-low ESR and closely packed pure lead plates, each power cell packs a punch. Many Shuriken Power Cells are designed to deliver the winning edge at SPL competitions. Others provide the consistent backup power needed for powerful car stereo systems, especially when parked for parties and shows. Shuriken batteries can be found powering anything from race cars and cabin cruisers to trolling motors and winches. Shuriken not only provides the constant voltage needed for optimum sound quality and other uses, it limits the draw from the starting battery. Look to Shuriken for the latest in power cell innovation. Shuriken is a brand of Metra Electronics, the global leader in auto sound and other electronic accessories. REFERENCE GUIE 12V BATTERY... 3-7 16V BATTERY...8 12V MARINE BATTERY...9 BATTERY PROTECTION... 11 TERMINAL SYSTEM...12 POER SUPPLY...13 CARGE SOLUTIONS...14 SAG/POP...15 2
BATTERIES SK-BT18 SK-BT20 SK-BT28 3 + Compact size + Compact size + Compact size + Low internal resistance for better mobile electronics performance + Low internal resistance for better mobile electronics performance + Low internal resistance for better mobile electronics performance 500 ATTS 18 AMP OURS 600 ATTS 20 AMP OURS 700 ATTS 28 AMP OURS 12 LBS 5.5KG 13 LBS 5.9KG 21LBS 9.5KG 7.14 181MM 3 76MM 6.5 165MM 7.14 181MM 3 76MM 6.5 165MM 6.5 165MM 4.92 125MM 6.9 175MM
BATTERIES 4 SK-BT35 + Small size + Low internal resistance, which provides for better mobile electronics performance SK-BT45 + Low internal resistance + Reserve power in a compact size SK-BT60 + Compact size 800 ATTS 35 AMP OURS 1250 ATTS 45 AMP OURS 1500 ATTS 60 AMP OURS 7.7 196MM 25LBS 11. 3 KG 5.12 130MM 6.46 164MM 7.76 197MM 32LBS 14.5KG 6.69 169MM 6.5 165MM 9 229MM 3 7. 5 LBS 17KG 5.5 140MM 8 203MM
BATTERIES SK-BT60RT SK-BT8785T SK-BT70 5 + Compact size + Compact size + Full size + Can be fully discharged and + Reversed positive and negative terminals for different hook ups 785 CRANK AMPS 1500 ATTS 60 AMP OURS 1500 ATTS 55 AMP OURS 1650 ATTS 70 AMP OURS 3 7. 5 LBS 17KG 40LBS 18.1KG 40LBS 18.1KG 9 229MM 5.5 140MM 8 203MM 9 229MM 5.5 140MM 8 203MM 10.2 259MM 6.61 168MM 9 229MM
BATTERIES 6 SK-BT75 + Large size SK-BT80 + Large size SK-BT100 + Large size + Low internal resistance for better mobile electronics performance 1750 ATTS 75 AMP OURS 1800 ATTS 80 AMP OURS 2000 ATTS 100 AMP OURS 10.2 259MM 41LBS 18.6KG 6.6 168MM 9 230MM 10.25 260MM 55LBS 25KG 6.75 171MM 8 203MM 60LBS 72.2KG 12 304MM 6.75 171MM 8.5 216MM
BATTERIES SK-BT110 SK-BT120 SK-BT140 7 + Large size + Large size + Large size + Extreme power reserve + Low internal resistance for better mobile electronics performance + Ideal design for SPL systems 2200 ATTS 110 AMP OURS 2400 ATTS 120 AMP OURS 4000 ATTS 140 AMP OURS 70LBS 31. 8 KG 79LBS 36KG 91LBS 41. 3 KG 12 305MM 6.6 168MM 9 229MM 13 330MM 6.75 171MM 8.5 216MM 13.5 343MM 6.73 171MM 11 280MM
BATTERy 8 SK-BT16V + Medium size 1800 ATTS 80 AMP OURS 10.25 260MM 55LBS 25KG 6.75 171MM 8 203MM
MARINE GRAE SK-MBT-55 + 12V Marine grade battery + Threaded & standard posts 785A COL CRANK 120 MIN RESERVE 55 AMP OURS SK-MBT-100 + 12V Marine grade battery + Threaded posts 800A COL CRANK 190 MIN RESERVE 100 AMP OURS 9 10.75" 273MM 42.5LBS I9.3KG 6.61" 168MM 6.89" 175MM 13" 330MM 68.3LBS 3IKG 6.85" 174MM 8.54" 217MM
10
BATTERY PROTECTION Shuriken Battery Boxes are constructed from heavy gauge steel powder coated for an indestructible finish. The design has holed flanges at the bottom for permanent mounting. The Shuriken Battery Boxes also have pre-cut slots that can be used for hold down straps. Protect your battery from heat and keep it in position with Shuriken Battery Boxes 11 BATTERY BOXES BOX SK-BT20-BX SK-BT35-BX SK-BT45-BX SK-BT60-BX SK-BT80-BX SK-BT100-BX SK-BT120-BX SK-BT140-BX SK-BT8785T-BX SK-BT16V-BX FITS BATTERY SK-BT18 & SK-BT20 SK-BT35 SK-BT45 SK-BT60 & SK-BT60RT SK-BT80 SK-BT100 SK-BT120 SK-BT140 SK-8785T SK-BT16V
TERMINAL SYSTEM 12 Power Terminal Systems are a positive and negative top SAE post / side post adapter. SK-BTA120 Power Terminal Adapter Use SK-N120 ing Nut Set Battery & ing Nut Set sold separately The SAE post is removable and can be replaced by the wing nut set. You can use the OE bolt to attach the adapter or use the optional SAE post or ing Nut posts. SK-BTA35-100 Power Terminal Adapter Use SK-N35-100 ing Nut Set Battery & ing Nut Set sold separately SK-N20 SK-N120 SK-N35-100 3 ing Nut sets (positive and negative). Short mounting posts replace the SAE posts. Medium mounting posts are for the battery. Long mounting posts mount the adapter to the battery. SK-SAE20 SK-SAE120 SK-SAE35-100 2 SAE post sets (Positive and negative). Shorter mounting post is for the batteries alone. The Long mounting post is to be used to mount the adapter to the battery.
SUPPLY / MAINTAIN / STORAGE IBPS35 + 35 Amp Power Supply + 430 atts Max Output + C Output Voltage 13.6V/14.4 ( C) + Output Voltage Tolerance + or -.7% + 5 AMPS Max AC Current @ 108VAC + Input Voltage Range 105-135 AC 430 ATTS 35 AMPS 7LBS 3.2KG 7.2 183MM 3.5 89MM 10.5 267MM IBPS55 IBPS75 IBPS100 13 + 55 Amp Power Supply + 780 atts Max Output + C Output Voltage 13.6V/14.4 ( C) + Output Voltage Tolerance + or -.7% + 7 AMPS Max AC Current @ 108VAC + Input Voltage Range 105-135 AC + 75 Amp Power Supply + 1065 atts Max Output + C Output Voltage 13.6V/14.4 ( C) + Output Voltage Tolerance + or -.7% + 12 AMPS Max AC Current @ 108VAC + Input Voltage Range 105-135 AC + 100 Amp Power Supply + 1440 atts Max Output + C Output Voltage 13.6V/14.4 ( C) + Output Voltage Tolerance + or -.7% + 13 AMPS Max AC Current @ 108VAC + Input Voltage Range 105-135 AC 780 ATTS 55 AMPS 1065 ATTS 75 AMPS 1440 ATTS 100 AMPS 7LBS 3.2KG 9LBS 4KG 11LBS 5KG 7.2 183MM 10.5 183MM 3.5 89MM 7.2 183MM 3.5 89MM 10.5 183MM 7.2 183MM 3.5 89MM 10.5 183MM
SOLUTIONS CTEK chargers are designed to slowly charge your battery, to ensure your battery gets the deepest, strongest charge possible. But it does more then that; it s designed to be a maintenance charger for owners of vehicles that are stored or not used often. From a motorcycle to an RV, CTEK has a solution. Plus there are accessories that will make the CTEK chargers more convenient and easier to use. 14 56-213 + CTEK US800 + esigned for 12V Batteries + elivers.8 amps of maintaining / charging current and designed to charge batteries as big as 32 a + Comes with a quick disconnect plus with M6 (6.4 mm) ring terminals and spring clamps + Low internal resistance for better mobile electronics performance 56-158 56-353 + CTEK Multi US3300 + elivers.8 amps of maintaining / charging current for small batteries and 3.3 amps for large - designed to charge batteries as big as 75 a + Comes with a quick disconnect plus with M6 (6.4 mm) ring terminals and spring clamps + 4 Step, fully automatic charging + CTEK Multi US7002 + elivers 7 amps of maintaining / charging current and designed to charge batteries as big as 150 a + Comes with a quick disconnect plus with M6 (6.4 mm) ring terminals and spring clamps + 8 Step, fully automatic charging 56-263 56-260 56-382 The 56-263 lets you plug into the cigarette lighter of your vehicle to charge your battery and the other end into the quick disconnect of a CTEK charger. For those owners of Imports, there is even an adapter so the 56-263 fits snugly into the cigarette lighter. ith a 6.4mm inner ring diameter the 56-260 is the perfect size to attach to most battery terminals. ith the quick disconnect plug, the 56-260 can be permanently connected to your battery while making the connection to a CTEK charger a breeze. Comes with CTEK chargers. ith a 8.4mm inner ring diameter the 56-382 is the perfect size to attach to most battery terminals. ith the quick disconnect plug, the 56-382 can be permanently connected to your battery while making the connection to a CTEK charger a breeze.
BANNERS + igh quality printed banner + Includes reinforced holes for hanging + imensions: 48 x 24 SK-BANR T SIRTS + Black shirt with white/red screenprint on front & back SK-SRT13-L Large SK-SRT13-XL X-large STICKERS + Black diecut vinyl, 5.75 x 1.5 SK-STKRB 15 SK-RACK Floor Standing Rack 7 eavy uty Shelves Strong Metal Frame Includes Top Graphic and 2 Side Graphics 31.25 0.79M EZ UP 81 2.05M 12 0.30M
Corporate eadquarters: Metra Electronics Corporation 460 alker Street olly ill, FL 32117 800-221-0932 shurikenonline.com metradealer.com Copyright 2014 - Metra Electronics Corporation SURBROC-14