TR270 COMPACT TRACK LOADER TIER 4 FINAL CERTIFIED ENGINE Model FPT F5H FL463 A*F001 Type Diesel 4-stroke, Turbo, D.I. Cylinders 4 Bore/Stroke 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3 (3.4 L) Fuel injection Direct, high pressure common rail HPCR Fuel #2 Diesel Fuel filter: Pre-filter Beta (30) = 200/spin-on Main filter Beta (4) = 20/spin-on Air intake Turbocharged w/ waste gate and external cooled EGR Exhaust aftertreatment: Particulate Matter Catalyst PM Catalyst Cooling Liquid Engine speeds RPM High idle no load 2500 +/- 25 Rated full load 2500 Low idle 1150 +/- 25 Horsepower @ 2500 RPM SAE J1349: Gross 74 hp (55 kw) Net 68 hp (51 kw) Peak torque @ 1400 RPM 232 lb ft (314 N m) Radiator: Core type All aluminum Core size area 2.77 ft 2 (0.257 m 2 ) Rows of tubes x columns 43 x 3 Cap pressure 16 +/- 2 psi (1.10 +/- 0.14 bar) Fan: Diameter 20.4 in (518 mm) Ratio 0.96:1 standard, 1.1:1 high-flow Water pump: Style Centrifugal Flow 29 gpm (110 L/min) Engine lubrication pump: Rotor pump w/ deep sump pan, plate cooler and pressurized under-piston nozzles Pump operating angle ratings: Side to side 45 Bucket up 35 Bucket down 45 POWERTRAIN Drive pump controls Servo-assist mechanical Pump to engine ratio 1:1 Displacement 2.81 in 3 (46 cc) Flow @ rated engine RPM: @ 97% efficiency 29.4 gpm (111 L/min) Charge pressure 360 psi (24.5 bar) System relief pressure 5,220 psi (360 bar) Drive pump controls Electro-hydraulic Pump to engine ratio 1:1 Displacement 2.75 in 3 (45 cc) Flow @ rated engine RPM: @ 97% efficiency 28.8 gpm (109 L/min) Charge pressure 362 psi (24.5 bar) System relief pressure 5,220 psi (360 bar) POWERTRAIN (cont.) Drive motors: Max. displacement 3.10 in 3 (50.9 cc) Displacement optional: High speed 2.02 in 3 (33.1 cc) Motor RPM @ high idle and 97% efficiency: Standard 1-speed 103 Optional 2-speed 156 Motor torque @ max. displacement and relief pressure, calculated @ 5,220 psi (360 bar): 4,654 lb ft (6310 N m) Travel speed: Low range 5.1 mph (8.2 kph) High range optional 7.6 mph (12.2 kph) Final drive: Planetary gearbox w/ 2-speed motor Tractive effort 7,414 lb (3370 kg) Parking brake: Type Engagement Spring-applied, hydraulic release multiple disc. Depress on/off brake button on handle or instrument panel, raise seat bar, get off seat or stop engine. ELECTRICAL Alternator 120 amp Starter 4.29 hp (3.2 kw) Battery 12-volt low-maintenance 925 cold-cranking amps @ 0 F (-18 C) OPERATOR ENVIRONMENT ROPS/FOPS level 1 canopy w/ side screens; Tilt ROPS/FOPS; Rear window w/ emergency escape; Instrument panel w/: hour meter, tachometer, fuel level, hydraulic oil temperature, engine coolant temperature, diagnostic features and security lockout; Non-suspension vinyl seat; 2 in (51 mm) retractable lap seat belt; Hand and foot throttles; Alarm package back-up and horn; Headliner; Dome light; Top window; Cup holder; 12-volt power plug socket; Foot rest; Storage tray; Low effort ergonomic hand controls; Padded seat bar w/ integral armrests; Loader control lockout system; Electric parking brake control; Floor cleanout panel; Proportional auxiliary hydraulic control on joystick. Indicators: Digital hourmeter; Fuel level LCD bar graph w/ alarm. Warning lights w/ alarms: Engine coolant temperature; Engine oil pressure; Engine malfunction; Hydraulic charge pressure; Hydraulic filter restriction; Hydraulic oil temperature. Page 1 of 4 OPERATOR ENVIRONMENT (cont.) Warning alarms: Battery voltage plus display Indicator light: Engine preheat; Parking brake; Seat bar reminder. OPERATING WEIGHT Operating weight 8,270 lb (3750 kg) Shipping weight 7,970 lb (3615 kg) Add-on weights: Side cab glass 47 lb (21.3 kg) Polycarbonate cab door 74 lb (33.6 kg) Glass cab door w/ wiper 134 lb (60.8 kg) Suspension seat 22 lb (10.0 kg) Additional counterweight 140 lb (63.8 kg) HYDRAULICS Implement pump type Gear Displacement: Standard aux. 2.23 in 3 (36.6 cc) High-flow aux. 0.76 in 3 (12.5 cc) Standard flow @ rated engine RPM: @ 100% efficiency: 24.2 gpm (91.5 L/min) Optional high-flow @ rated engine RPM: @ 100% efficiency 32.4 gpm (122.6 L/min) Loader control valve: Type 3 spool/open center/series - series Relief pressure 3,050 psi (210 bar) Port relief pressures: Loader raise 3,263 psi (225 bar) Bucket curl 3,770 psi (260 bar) Bucket dump 1,160 psi (80 bar) Hydraulic lines: Tubing 37 JIC Flare Loop hoses SAE 100 R19 Hydraulic oil cooler: Number of fins 10 per inch (3.94 per cm) Number of tube rows x columns 9 x 1 Area 136.5 in 2 (880 cm 2 ) Hydraulic filter Beta (4) = 75/spin-on Lift cylinders: Bore diameter 2.50 in (63.5 mm) Rod diameter 1.75 in (44.5 mm) Stroke 31.69 in (804.9 mm) Closed length 45.59 in (1158.0 mm) Bucket cylinders: Bore diameter 2.75 in (69.9 mm) Rod diameter 1.38 in (34.9 mm) Stroke 16.14 in (410.0 mm) Closed length 24.02 in (610.0 mm) SERVICE CAPACITY Fuel tank 19.5 gal (73.8 L) Engine oil w/ filter 10.0 qt (9.4 L) Hydraulic system: Reservoir 7.0 gal (26.5 L) Total 8.5 gal (32.2 L)
Line drawings are for illustrative purpose only and may not be exact representation of unit. DIMENSIONS A. Overall operating height: PERFORMANCE SPECS Rated operating capacity ROC*: 35% of tipping load 1,890 lb (860 kg) 50% of tipping load 2,700 lb (1225 kg) with additional counterweight 2,800 lb (1270 kg) Tipping load* 5,400 lb (2449 kg) Breakout forces @ 3,150 psi (217 bar)*: Bucket cylinders 7,270 lb (32.3 kn) Lift cylinders hydraulic limit 6,260 lb (27.8 kn) Cycle times: Raise 3.6 sec Lower 1.8 sec Dump 2.2 sec Roll back 1.7 sec NOTE: *Measured using 72 in (1.83 m) foundry/excavating bucket. with foundry/excavating bucket 154.3 in (3.92 m) with low profile bucket 158.3 in (4.02 m) with low profile extended bucket 163.2 in (4.15 m) Height to: B. Bucket hinge pin 123.0 in (3.12 m) C. Top of ROPS 78.7 in (2.00 m) D. Bottom of level bucket, fully raised 116.1 in (2.95 m) Overall length: E. without attachment with coupler 105.1 in (2.67 m) F. with foundry/excavating bucket on ground 129.6 in (3.29 m) with low profile bucket 133.7 in (3.40 m) with low profile extended bucket 138.8 in (3.53 m) G. Maximum dump angle 39.6 H. Dump height: with foundry/excavating bucket 98.2 in (2.50 m) @ 39.6 with low profile bucket 95.6 in (2.43 m) @ 39.6 J. Dump reach at maximum height with low profile bucket 25.4 in (0.65 m) @ 39.6 Maximum attachment rollback: K. Bucket on ground 31.0 L. Bucket at full height 98.6 M. Track on ground 55.9 in (1.42 m) P. Ground clearance bottom of belly pan 8.0 in (0.20 m) Q. Angle of departure 32.0 Clearance circle: R. without bucket 50.7 in (1.29 m) S. with 72 in (1.83 m) foundry/excavating bucket in carry position 79.9 in (2.03 m) with 72 in (1.83 m) low profile bucket on ground 83.1 in (2.11 m) with 72 in (1.83 m) extended low profile on ground 87.7 in (2.23 m) T. Clearance circle rear 62.9 in (1.60 m) V. Track gage 53.4 in (1.36 m) W. Over the track width 65.9 in (1.68 m) TR270 Page 2 of 4
TRACK SELECTION Type Area Ground Pressure Width to Outside of Track 12.6 in (320 mm) 1,408 in 2 (9100 cm 2 ) 5.9 psi (40.5 kpa) 65.9 in (1.68 m) OPTIONAL BUCKETS Type Width Weight Heaped Capacity Dirt & Foundry 66 in (1.68 m) 385 lb (175 kg) 14.8 ft³ (0.42 m³) 72 in (1.83 m) 420 lb (190 kg) 16.2 ft³ (0.46 m³) 78 in (1.98 m) 440 lb (200 kg) 17.7 ft³ (0.50 m³) Low Profile 72 in (1.83 m) 480 lb (218 kg) 14.8 ft³ (0.42 m³) Low Profile 66 in (1.68 m) 470 lb (214 kg) 15.9 ft³ (0.45 m³) Extended 72 in (1.83 m) 510 lb (232 kg) 17.7 ft³ (0.50 m³) 78 in (1.98 m) 540 lb (245 kg) 19.1 ft³ (0.54 m³) 84 in (2.13 m) 575 lb (262 kg) 20.5 ft³ (0.58 m³) Light Material 72 in (1.83 m) 475 lb (216 kg) 23.3 ft³ (0.66 m³) 84 in (2.13 m) 540 lb (245 kg) 27.5 ft³ (0.78 m³) Manure & Slurry 72 in (1.83 m) 480 lb (218 kg) 19.1 ft³ (0.54 m³) 84 in (2.13 m) 545 lb (248 kg) 22.6 ft³ (0.64 m³) Heavy-Duty 66 in (1.68 m) 450 lb (205 kg) 13.1 ft³ (0.37 m³) 72 in (1.83 m) 510 lb (230 kg) 14.1 ft³ (0.40 m³) 78 in (1.98 m) 530 lb (240 kg) 15.5 ft³ (0.44 m³) Heavy-Duty 66 in (1.68 m) 520 lb (235 kg) 16.6 ft³ (0.47 m³) with spillguard 72 in (1.83 m) 585 lb (265 kg) 18.4 ft³ (0.52 m³) 78 in (1.98 m) 605 lb (275 kg) 19.8 ft³ (0.56 m³) TR270 Page 3 of 4
STANDARD EQUIPMENT OPERATOR ENVIRONMENT See page 1 ENGINE FPT F5H FL463 A*F001 diesel Over & under radiator and oil cooler Glow plugs Integral engine oil cooling Fuel filter with water trap Dual element air cleaner 120 amp alternator 925 CCA 12-volt battery Master electrical disconnect POWERTRAIN 1-speed hydrostatic drive Servo-assist mechanically-controlled pumps SAHR disc parking brake HYDRAULICS Auxiliary hydraulics: @ 3,050 psi (210 bar) 24.2 gpm (91.5 L/min) Auxiliary hydraulic disconnects, ISO flat-face connect-under-pressure with case drain Hydraulic circuit pedal lock Loader arm-mounted ISO flat-face connectors Auxiliary function lockout override Loader function lockout system Loader lift lockout override 3-spool loader control valve Heavy-duty oil cooler Loader arm float position LOADER Radial loader arm design Mechanical attachment coupler Loader lift arm support strut OTHER Machine protection auto shutdown Mounting points for add-on counterweights Halogen lights: 2 front 2 side 2 rear flood Rear tail lights Lockable service access hood Single-point daily servicing Pre-wired for rotating beacon Remote oil drain Remote oil and fuel filters OPTIONAL EQUIPMENT OPERATOR ENVIRONMENT Enclosed cab: Fully sealed and pressurized FSP Glass door with wiper and washer Sliding side windows removable 3-point seat belt 2 in (51 mm) width Ventilation system with integrated heater AM/FM radio with 2 speakers Keyless start ignition Electro-hydraulic controls: For drive/steering, loader functions Switchable between H and ISO patterns Adjustable sensitivity of controls Vinyl mechanical suspension seat Deluxe cloth, air suspension seat, with heater and lumbar support Interior mirror 3 inch (76.2 mm) retractable seat belt Heater and air conditioner Open cab interior trim package Demolition cab door with polycarbonate FOPS level 2 POWERTRAIN 2-speed hydrostatic drive ENGINE Coolant block heater HYDRAULICS High-flow auxiliary hydraulics combined: @ 3,050 psi (210 bar) 32.4 gpm (122.6 L/min) Second auxiliary hydraulics LOADER Auxiliary front electric control Ride control Hydraulic attachment coupler Hydraulic one-way self-leveling OTHER Add-on counterweights Road lights Rotating beacon Four-corner LED strobe Lift points four-point or single-point Language decals Factory-installed tracks see page 3 Buckets see page 3 Bolt-on bucket cutting edges Bolt-on heavy-duty bucket spillguard Bolt-on heavy-duty bucket teeth field kit 42 in (1.07 m) and 48 in (1.22 m) pallet forks Special paint Debris reduction seal package NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable. NOTE: All engines meet current EPA emissions requirements. IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Case Construction Equipment Inc. does not warrant the safety or reliability of attachments from other manufacturers. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Capital is a trademark in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. www.casece.com Form No. CCE201404TR270 Printed in U.S.A. 2014 CNH Industrial America LLC Replaces form no. CCE201307TR270 TR270 Page 4 of 4 All Rights Reserved All Case construction equipment is biodiesel ready.
TR270 COMPACT TRACK LOADER PRELIMINARY
TR270 Compact Track Loader LANDSCAPING S LITTLE HEAVYWEIGHT. Small in size and weight but big in power and performance, the TR270 is ideal for landscaping and applications requiring a light footprint. At less than 66 in. (1.68 m) wide and with an operating weight of only 8,270 lb. (3 750 kg), it won t disrupt ground conditions and easily fits on most trailers. But don t let its compact size mislead you. Powered by a strong Tier 4 Final CEGR engine, this workhorse delivers best-in-class torque, breakout force and auxiliary hydraulic flow. It s a light loader that really packs a punch.
TR270 HIGHLIGHTS New EZ EH setup menu provides a simple solution for speed and control customization, as well as, a new intuitive lockout option. New enhanced control handles for EH machines incorporate additional feel points to aid the operator in feathering the controls. Best-in-class torque, breakout force, and standard aux flow to tackle demanding applications. Triple flange rollers help prevent de-tracking on inclines by using dozer-style rollers with a larger inner diameter flange positioned between the track lugs. Lifetime sealed and oil lubricated rollers and idlers reduce the possibility of material and moisture getting into the rollers and idlers. Best-in-class torque, breakout and auxiliary flow. The powerful new Tier 4 Final solution gives the added benefits of additional torque, auxiliary hydraulic flow, and bucket breakout force. The TR270 widens its lead in these categories for mediumframe CTLs with 232 lb. ft. (314 N m) of torque, 7,270 lb. (32.3 kn) of bucket breakout, and a standard aux hydraulic flow of 24.2 gpm (91.5 L/min). It s more strength to lift, move, and simply do more per day. Love where you work. Alpha Series CTLs offer a large 35 inch wide cab. It s fully sealed and pressurized against noise, dust and fumes to keep out the bad and an optional radio and upgraded climate control system help keep in the good. Plus, its cab-forward design provides best-in-class visibility with site lines to bucket edges, curb lines and rearward. But a comfortable cab is only part of it you ve got work to do. That s why TR270 options include push-button Ride Control, hydraulic one-way self-leveling, 2-speed round drive, and an advanced instrument cluster with programmable security codes and automatic shutdown. There s even a control to switch between the CASE H operating pattern and ISO pattern so multiple operators can easily match their preference. Radial-lift design for superior strength when digging, prying or pushing and perfect for easy loading or unloading of pallets. CEGR engine delivers 10% increase in power over previous generations while meeting Tier 4 Final emissions regulations. Large 19.5 gal (73.8 L) fuel tank allows loader to run all day without refueling. Low step and threshold make it easy to safely get in and out of the cab. Hydraulic quick-coupler enables operators to quickly and safely change attachments from the comfort of the cab. Standard side lighting, forward-cab design, a skylight and ultra-narrow wire side-screens provide best-in-class visibility day and night. New electronic control module feature logs operating data and has CAN-bus capabilities for diagnostic monitoring and telematics. All daily maintenance points are easily accessible from the rear of the machine. www.casece.com
TR270 COMPACT TRACK LOADER TR270 Maintenance Made Easy. A C B E When you buy a CASE, you want it to last. We make it easy. That s why on Alpha Series compact track loaders, routine service points are all located at the rear of the machine so you can quickly access the engine, filters, fill points and whatever you need to properly maintain and extend the life of the machine. On top of that, they also offer our famous easy-tilt cab for convenient access to the drivetrain compartment. D Line drawings are for illustrative purpose only and may not be exact representation of unit. DIMENSIONS TR270 A. Height To Bucket Hinge Pin 123.0 in. (3.12 m) B. Dump Height With Low Profile Bucket 95.6 in. (2.43 m) @ 39.6 C. Height To Top Of ROPS 78.7 in. (2.00 m) D. Overall Length With Low Profile Bucket 133.7 in. (3.40 m) E. Over The Track Width 65.9 in. (1.68 m) SPECIFICATIONS Lift Configuration Engine TR270 Radial FPT F5H FL463 A*F001 Gross hp (kw) @ 2500 RPM 74 (55) Net hp (kw) @ 2500 RPM 68 (51) Peak Torque lb. ft. (N m) @ 1400 RPM 232 (314) Displacement in.³ (L) 207 (3.4) Emissions Certification Rated Operating Capacity ROC 35% lb. (kg) Rated Operating Capacity ROC 50% lb. (kg) Tier 4 Final 1,890 (860) 2,700 (1 225) Tipping Load lb. (kg) 5,400 (2 449) Bucket Breakout Force lb. (kn) 7,270 (32.3) Standard Aux. Hydraulics gpm (L/min) 24.2 (91.5) High-Flow Aux. Hydraulics gpm (L/min) 32.4 (122.6) Operating Weight lb. (kg) 8,270 (3 750) Adaptable Power. Best-in-class standard auxiliary hydraulic flow has been increased to 24.2 gpm (91.5 L/min) and optional high-flow to 32.4 gpm (122.6 L/min) to power your high-performance attachments. And with our Connect Under Pressure (CUP) manifolds, you won t need any tools to connect or disconnect hydraulic lines. 2013 CNH America LLC. All rights reserved. CASE is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies. Printed in U.S.A. Always read the operator s manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs and use any safety features provided. All engines meet current EPA emission regulations. All specifications are stated in accordance with SAE standards or recommended practices, where applicable. Contains 10% post-consumer fiber IMPORTANT: CASE Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Availability of some models and equipment builds vary according to the country in which the equipment is used. The illustrations and text may include optional equipment and accessories and may not include all standard equipment. Your CASE dealer/distributor will be able to give you details of the products and their specifications available in your area. CASE construction equipment is biodiesel friendly.