Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol
This catalog covers the Amphenol /Matrix MIL-C-, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the following options available: Three coupling styles - bayonet or threaded plugs and receptacles, and quick-disconnect plugs with or without lanyards Aluminum or passivated stainless steel versions A wide variety of mounting configurations Can be ordered by military or equivalent Amphenol/ Matrix proprietary part numbers. The Matrix connectors covered in this catalog broaden the miniature cylindrical family offered by Amphenol. Equivalent MIL-C-, Series III connectors can be ordered in the Amphenol /Pyle versions. Within the Pyle product family of MIL-C- are additional options such as high temperature firewall versions and hermetic styles. See page for more information on the Amphenol/Pyle versions of MIL-C-, Series III connectors. Should more information be required concerning the connectors covered in this publication, or if special application needs arise, please contact: Amphenol Corporation Amphenol Aerospace 0-0 Delaware Avenue Sidney, New York - Telephone 0--0 Fax: 0-- View and download or print Amphenol catalogs online at: Web site: www.amphenol-aerospace.com Amphenol operates quality systems that are certified to ISO00: 000 by third party registrars. TABLE OF CONTENTS Amphenol /Matrix MIL-C-, Series III Connectors Introduction, Table of Contents.................. General Description, Features and Benefits......, Class Descriptions, Performance Specifications.................... Quick Reference Chart........................ Bayonet Coupling Shell Styles, Dimensional Data: Wall Mounting Receptacle................... Jam Nut Receptacle........................ Straight Plug, Straight Plug with RFI Grounding Fingers....... How to Order Bayonet Coupling Style............ Threaded Coupling Shell Styles, Dimensional Data Wall Mounting Receptacle..................0 Jam Nut Receptacle....................... Straight Plug, Straight Plug, with RFI Grounding Fingers...... Straight Plug, Self-Locking.................. Quick-Disconnect Coupling Plug Dimensional Data Straight Plug with/without Lanyards........... How to Order Threaded and Quick-Disconnect Coupling Styles............................. Insert Arrangement Chart..................... Alternate Positioning......................... Insert Arrangement Patterns............... - 0 Contact Information, Sealing Plugs, Crimping and Insertion/Removal Tools........... Additional MIL-C-, Series III Miniature Cylindrical Connectors offered by Amphenol......................... Sales Office and Distributor Listing.
Amphenol /Matrix Miniature Cylindrical MIL-C-, Series III Connectors general description, features and benefits Amphenol broadens their Miniature Cylindrical Family of Connectors with the addition of the Matrix Product line of MIL-C-, Series III Connectors. This series provides many choices within the range of a medium sized, environmentally resistant cylindrical connector. With three coupling style choices - bayonet, threaded and quick-disconnect - the versatility of this family makes it increasingly popular for panel mount, box mount and line-to-line applications in aircraft. For general duty environmentally resistant requirements, this family of connectors provides a wide range of interconnection solutions. Amphenol /Matrix MIL-C-, Series III Connector Design Characteristics Recommended operating voltage to 00 VAC (RMS) at sea level Complete environmental sealing includes individual contact seals and a silicone elastomer interfacial seal with raised barriers around each pin, a shell-to-shell seal and an insert-to-shell seal. Sealing over a wide range of wire diameters is assured by a triple-webbed grommet design Captive coupling nut prevents tampering, while a reduced coupling ring ramp allows easier mating Incorporates crimp rear release contacts in sizes, and 0; contact arrangements accept to circuits Contacts conform to MIL-C-0 and use standard qualified rear-release type plastic tools Insertion and removal of contacts from the rear of the connector assures no damage to the front that might affect the sealing characteristics Grommets are constructed of tear-resistant elastomer and experience no degradation when exposed to a broad range of fluids Closed entry socket side of the insert is designed with a lead-in chamfer and a hard face that will accept a pin contact bent within pre-established limits BAYONET COUPLING CONNECTORS Quick positive coupling assured by point bayonet coupling system; visual confirmation of complete coupling Five key/keyway design eliminates mismating Shell sizes in the following mounting styles: wall mounting receptacle jam nut receptacle straight plug, straight plug with RFI grounding (provides EMI shielding) MS and Proprietary versions available Alternate positioning available Intermateable with most MIL-C-00 bayonet coupling connectors Aluminum shells with black anodized, cadmium or electroless nickel finish options; also shells of passivated stainless steel are available. THREADED COUPLING CONNECTORS Threaded coupling offers greater resistance to decoupling with a visual full mating indicator band on the shell Shell sizes in the following mounting styles: wall mounting receptacle jam nut receptacle straight plug, straight plug with RFI grounding (provides EMI shielding), and straight plug with a self-locking clutch plate MS and Proprietary versions available Alternate positioning available Intermateable with most MIL-C-00 threaded coupling connectors Aluminum shells with black anodized, cadmium or electroless nickel finish options; also shells of passivated stainless steel are available. QUICK-DISCONNECT COUPLING CONNECTORS Push-pull, quick-disconnect coupling is available in a straight plug, that can be ordered with or without a lanyard release mechanism
Amphenol /Matrix Miniature Cylindrical MIL-C-, Series III Connectors wide variety of coupling styles and customer options BAYONET COUPLING CONNECTORS THREADED COUPLING CONNECTORS M/ & wall mounting receptacle M/ & wall mounting receptacle M/ & jam nut receptacle M/ & jam nut receptacle M/ & straight plug M/ & straight plug, RFI grounding M/ & straight plug M/ & straight plug, RFI grounding M/ & straight plug, self-locking QUICK-DISCONNECT COUPLING CONNECTORS M/ & quick disconnect plug M/ & quick disconnect plug with lanyard
Amphenol /Matrix Miniature Cylindrical MIL-C-, Series III Connectors class descriptions, performance specifications CLASS DESCRIPTIONS Military MIL-C-, Series III Amphenol/Matrix Proprietary MB Series Connector Style Description Class A Class A Bayonet, Threaded or Quick-Disconnect Aluminum shell, black non-conductive anodize finish, fluid resistant Class R Class R Bayonet, Threaded or Quick-Disconnect Aluminum shell, electroless nickel finish, fluid resistant Class G Class G Bayonet, Threaded or Quick-Disconnect Stainless steel shell, passivated, fluid resistant Class W Class W Bayonet, Threaded or Quick-Disconnect Aluminum shell, cadmium olive drab finish, corrosion/fluid resistant For Classes K, S and N, contact Amphenol, Sidney, NY for information on the Amphenol/Pyle high temperature versions of MIL-C-, Series III. PERFORMANCE SPECIFICATIONS Service Rating Recommended Operating AC Voltage at Sea Level SERVICE RATINGS Test Voltage AC (RMS), 0 cps Sea Level 0,000 ft. 0,000 ft. 0,000 ft. I 00,00 00 00 Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. OPERATING TEMPERATURE RANGE C ( F) to 00 C ( F) ENVIRONMENTAL SEAL Wired, mated connectors with the specified accessory attached will meet the altitude immersion test specified in MIL-C-. DURABILITY Minimum of 00 mating cycles. SHOCK AND VIBRATION REQUIREMENTS Wired, mated connectors shall not be damaged, nor shall there be a current interruption longer than one microsecond when subjected to the following: SHOCK: One shock in each of the three major axes, having a 00g peak for a six millisecond duration (half-sine pulse). VIBRATION: Twelve hours of random vibration having a range of 0 to,000 Hz with a.0 inch double amplitude (0- Hz) and a 0g peak level (-,000 Hz).
Amphenol /Matrix Miniature Cylindrical MIL-C-, Series III Connectors quick reference chart The following is a quick reference chart for use in determining either the military designation or the proprietary Amphenol /Matrix designation number for the MIL-C- connectors covered in this catalog. See also the how to order pages for complete part number breakdowns. The how to order for bayonet connectors is shown on page, and the how to order for threaded and quick-disconnect type connectors is shown on page. MIL-C- Military Designation Amphenol /Matrix Proprietary Designation Contact Type Connector Style M/ MB0( )S Socket Bayonet coupling, square flange wall mount receptacle M/ MB0( )P Pin Bayonet coupling, square flange wall mount receptacle M/ MB( )S Socket Bayonet coupling, single hole mount jam nut receptacle M/ MB( )P Pin Bayonet coupling, single hole mount jam nut receptacle M/ MB( )S Socket Bayonet coupling, standard straight plug M/ MB( )P Pin Bayonet coupling, standard straight plug M/ MB( )S Socket Bayonet coupling, straight plug with RFI grounding fingers M/ MB( )P Pin Bayonet coupling, straight plug with RFI grounding fingers M/ MT0( )S Socket Threaded couplling, square flange wall mount receptacle M/ MT0( )P Pin Threaded coupling, square flange wall mount receptacle M/ MT( )S Socket Threaded coupling, single hole mount jam nut receptacle M/ MT( )P Pin Threaded coupling, single hole mount jam nut receptacle M/ MT( )S Socket Threaded coupling, standard straight plug M/ MT( )P Pin Threaded coupling, standard straight plug M/ MT( )S Socket Threaded coupling, straight plug with RFI grounding fingers M/ MT( )P Pin Threaded coupling, straight plug with RFI grounding fingers M/ MT( )S Socket Threaded coupling, straight plug with self-locking clutch plate M/ MT( )P Pin Threaded coupling, straight plug with self-locking clutch plate M/ MQ( )P Pin Quick-Disconnect push-pull coupling, straight plug without lanyard M/ MQ( )S Socket Quick-Disconnect push-pull coupling, straight plug without lanyard M/ MQ( )P Pin Quick-Disconnect push-pull coupling, straight plug with lanyard M/ MQ( )S Socket Quick-Disconnect push-pull coupling, straight plug with lanyard
Miniature Cylindrical MIL-C-, Series III Bayonet Coupling M/ & wall mounting receptacle Receptacle Shell, Square Flange Wall Mount, Bayonet Coupling Military No. M/ with socket contacts M/ with pin contacts Amphenol/Matrix No. MB0 Master Keyway A Typ. B Typ. Fully Coupled Indicator.0 H Accessory Thread Teeth Equally Spaced 0 Apart D Dia. E. Dia. Grommet C. Dia. Mounting Holes Typ. -Places Blue Color Bands. ±.00.0.0 Grommet Extension.0 Min. Full Thread.0 ±.00 To complete order number see how to order for bayonet coupling connectors, page. Shell Size A ±.00 B ±.00 C Dia. ±.00 D Dia. E Dia. H Accessory Thread Class A...0./..0.000-0 UNF 0...0./..0.0- UNEF.0..0./...00-0 UNEF..0.0./...0-0 UNEF.0..0.0/.00.0.0000-0 UNEF..0.0./...0- UNEF 0...0./...- UNEF..0.0./...- UNEF.0...0/.0..- UNEF
Miniature Cylindrical MIL-C-, Series III Bayonet Coupling M/ & jam nut receptacle Receptacle Shell, Single Hole Mount Jam Nut, Bayonet Coupling Military No. M/ with socket contacts M/ with pin contacts Amphenol/Matrix No. MB.0 Master Keyway A J Mounting Thread Fully Coupled Indicator. ±.00 F H Accessory Thread Teeth Equally Spaced 0 Apart B E Dia. Grommet C.0 Dia. Lockwire Hole -Places Equally Spaced.0 Grommet Extension.0.0 Min. Full Thread Blue Color Bands To complete order number see how to order for bayonet coupling connectors, page. H Accessory Thread Class A J Mounting Thread Class A Shell Size A B C D Dia. E Dia. F./.0.../..0./.0.000-0 UNF.0-0 UN 0./..0../..0./.0.0- UNEF.00-0 UNEF.0/.0.../.../.0.00-0 UNEF.-0 UNEF./...0./.../.0.0-0 UNEF.0000-0 UNEF.0/.00...0/.00.0./.0.0000-0 UNEF.0-0 UN.0/..../.../.0.0- UNEF.00- UNEF 0./..../.../.0.- UNEF.0- UNEF.0/...0./.../..- UNEF.000-0 UNEF./..0..0/.0../..- UNEF.0- UNEF
Miniature Cylindrical MIL-C-, Series III Bayonet Coupling M/ & straight plug M/ & straight plug with RFI grounding A. Dia. Over Knurl Master Key Fully Coupled Indicator.0 Min. Full Thread H Accessory Thread Teeth Equally Spaced 0 Apart E Dia. Grommet Plug Shell, Bayonet Coupling Military No. M/ with socket contacts M/ with pin contacts.0 Grommet Extension.0 Amphenol/Matrix No. MB Blue Color Band.0 Min..0 Master Key A. Dia. Over Knurl RFI Fingers Blue Color Band Fully Coupled Indicator.0 Min. Full Thread H Accessory Thread Teeth Equally Spaced 0 Apart E Dia. Grommet.0 Grommet Extension.0.0 Min. Plug Shell, RFI Grounding, Bayonet Coupling Military No. M/ with socket contacts M/ with pin contacts Amphenol/Matrix No. MB.0 To complete order number see how to order, page. Shell Size A Dia. E Dia. H Accessory Thread Class A..0.000-0 UNF 0.0.0.0- UNEF.0..00-0 UNEF...0-0 UNEF..0.0000-0 UNEF...0- UNEF 0.0..- UNEF...- UNEF.0..- UNEF
Miniature Cylindrical MIL-C-, Series III Bayonet Coupling how to order HOW TO ORDER BY MILITARY PART NUMBER MIL-C- SERIES III BAYONET COUPLING CONNECTORS M / R 0. Connector Type M designates MIL-C- Series III Connectors. Connector Style (Refer to military specification slashsheet number.) Bayonet coupling connectors are designated by numbers /-/ as follows: / wall mounting receptacle with socket contacts / wall mounting receptacle with pin contacts / jam nut receptacle with socket contacts / jam nut receptacle with pin contacts / standard straight plug with socket contacts / standard straight plug with pin contacts / straight plug with RFI grounding, socket contacts / straight plug with RFI grounding, pin contacts. Service Class A aluminum shell, black non-conductive anodize finish, fluid resistant R aluminum shell, electroless nickel finish, fluid resistant G W stainless steel shell, passivated, fluid resistant aluminum shell, cadmium olive drab finish, corrosion/fluid resistant Note: Consult Amphenol, Sidney, NY for hermetic classes H and Y availability..,. Shell size (sizes - available), and insert arrangement - See chart on page and pattern drawings that follow.. Keying Positions (rotation of master key/keyway of shell) Use N for normal. Use,,,, or Y for alternate keying positions. See page for descriptions. Clocking Positions (rotation of insert) Use,,,, or for alternate clocking positions. See page for descriptions. HOW TO ORDER BY PROPRIETARY PART NUMBER MIL-C- SERIES III BAYONET COUPLING CONNECTORS MB R 0 P ***. Connector Type MB designates Amphenol /Matrix Bayonet Coupling Connectors. Connector Style 0 wall mounting receptacle jam nut receptacle standard straight plug straight plug with RFI grounding fingers. Service Class A aluminum shell, black non-conductive anodize finish, fluid resistant R aluminum shell, electroless nickel finish, fluid resistant G W stainless steel shell, passivated, fluid resistant aluminum shell, cadmium olive drab finish, corrosion/fluid resistant Note: Consult Amphenol, Sidney, NY for hermetic classes H and Y availability..,. Shell size (sizes - available), and insert arrangement - See chart on page and pattern drawings that follow.. Contact Types P designates pin S designates socket. Keying Positions (rotation of master key/keyway of shell) N not required for normal position. Use,,,, or Y for alternate keying positions. See page for descriptions. Clocking Positions (rotation of insert) Use,,,, or for alternate clocking positions. See page for descriptions.. Modification Number Consult Amphenol, Sidney, NY for information. For ordering information on accessories, such as protection caps and backshell hardware, contact Amphenol, Sidney, NY.
Miniature Cylindrical MIL-C-, Series III Threaded Coupling M/ & wall mounting receptacle Receptacle Shell, Square Flange Wall Mount, Threaded Coupling Military No. M/ with socket contacts M/ with pin contacts Amphenol/Matrix No. MT0 Master Keyway A Typ. B Typ.. ±.00 Fully Coupled Indicator.00.0 ±.00 H Accessory Thread Teeth Equally Spaced 0 Apart D Dia. Grommet C Dia. Mounting Holes Typ. -Places J Coupling Thread Blue Color Bands.0.00Grommet Extension.0 Min. Full Thread To complete order number see how to order, page. Shell Size A ±.00 B ±.00 C Dia. D Dia. * Shell size is not a MS connector; order by proprietary part number. H Accessory Thread Class A J Coupling Thread Class B.../..0.000-0 UNEF.- UNEF 0.../..0.0- UNEF.- UNEF.0../...00-0 UNEF.0-0 UNEF..0./...0-0 UNEF.-0 UNEF.0../..0.0000-0 UNEF.0- UNEF..0./...0- UNEF.- UNEF 0.../...- UNEF.- UNEF..0./...- UNEF.- UNEF.0../...- UNEF.- UNEF *.000../...00- UNS.- UN 0
Miniature Cylindrical MIL-C-, Series III Threaded Coupling M/ & jam nut receptacle Receptacle Shell, Single hole mount Jam Nut Receptacle, Threaded Coupling Military No. M/ with socket contacts M/ with pin contacts Amphenol/Matrix No. MT Master Keyway A Fully Coupled Indicator. ±.00.00 F.0 Dia. Lockwire Hole -Places Equally Spaced H Accessory Thread Teeth Equally Spaced 0 Apart B E. Dia. Grommet C J Coupling Thread Blue Color Band D Mounting Thread.0 Grommet Extension.00.0 Min. Full Thread Blue Color Band To complete order number see how to order, page. Shell Size A ±.00 B C D Mounting Thread * Shell size is not a MS connector; order by proprietary part number. E Dia. F H Accessory Thread Class A J Mounting Thread Class A..0..0-0 UN.0./.0.000-0 UNF.- UNEF 0..0..00-0 UNEF.0./.0.0- UNEF.- UNEF.0..0.-0 UNEF../.0.00-0 UNEF.0-0 UNEF...0.0000-0 UNEF../.0.0-0 UNEF.-0 UNEF.0...0- UNEF.0./.0.0000-0 UNEF.0- UNEF....00- UNEF../.0.0- UNEF.- UNEF 0....0- UNEF../.0.- UNEF.- UNEF...0.000- UNEF../..- UNEF.- UNEF..0..0- UNEF../..- UNEF.- UNEF *.0.0..0-0 UN../..00- UNS.- UN
Miniature Cylindrical MIL-C-, Series III Threaded Coupling M/ & straight plug M/ & straight plug with RFI grounding Master Key J Coupling Thread A Dia. Over Knurl Blue Color Band.0.0 Dia. Safety Wire Holes -Places Equally Spaced.0 Min. H Accessory Thread Teeth Equally Spaced 0 Apart E Dia. Grommet.0.0 Grommet Extension.0 Min. Full Thread Plug Shell, Threaded Coupling Military No. M/ with socket contacts M/ with pin contacts Amphenol/Matrix No. MT Master Key J Coupling Thread RFI Fingers A Dia. Over Knurl.0 Dia. Safety Wire Holes -Places Equally Spaced.0 Min. H Accessory Thread Teeth Equally Spaced 0 Apart E Dia. Grommet Plug Shell, RFI Grounding, Threaded Coupling Military No. M/ with socket contacts M/ with pin contacts Amphenol/Matrix No. MT.0.0 Grommet Extension Blue Color Band.0.0 Min. Full Thread To complete order number see how to order, page. Shell Size A Dia. E Dia. H Accessory Thread Class A * Shell size is not a MS connector; order by proprietary part number. J Coupling Thread Class B..0.000-0 UNF.- UNEF 0.0.0.0- UNEF.- UNEF.0..00-0 UNEF.0-0 UNEF...0-0 UNEF.-0 UNEF..0.0000-0 UNEF.0- UNEF...0- UNEF.- UNEF 0.0..- UNEF.- UNEF...- UNEF.- UNEF.0..- UNEF.- UNEF *.00..00- UNS.- UN
Miniature Cylindrical MIL-C-, Series III Threaded Coupling M/ & straight plug, self-locking Plug Shell, with Self-Locking Clutch Plate, Threaded Coupling Military No. M/ with socket contacts M/ with pin contacts Amphenol/Matrix No. MT Master Key J Coupling Thread A Dia. Over Knurl Fully Coupled Indicator H Accessory Thread Teeth Equally Spaced 0 Apart B Dia. Grommet Blue Color Bands Clutch Plate.0.0.0 Grommet Extension.0 Min. Full Thread To complete order number see how to order, page. Shell Size A Dia. B Dia. H Accessory Thread Class A * Shell size is not a MS connector; order by proprietary part number. J Coupling Thread Class B..0.000-0 UNEF.- UNEF 0..0.0- UNEF.- UNEF.0..00-0 UNEF.0-0 UNEF...0-0 UNEF.-0 UNEF.0.0.0000-0 UNEF.0- UNEF...0- UNEF.- UNEF 0...- UNEF.- UNEF.0..- UNEF.- UNEF...- UNEF.- UNEF *...00- UNS.- UN
Miniature Cylindrical MIL-C-, Series III Quick-Disconnect Coupling M/ & quick-disconnect plug M/ & quick-disconnect plug with lanyard A Dia..0.0 Min. Full Thread Blue Color Band.0.0 Grommet Extension Teeth Equally Spaced 0 Apart E Dia. Grommet H Accessory Thread Plug Shell, Quick-Disconnect, Push-Pull Coupling without Lanyard Military No. M/ with pin contacts M/ with socket contacts Amphenol/Matrix No. MQ A Dia. Blue Color Band.0 Full Thread Teeth Equally Spaced 0 Apart E Dia. Grommet Plug Shell, Quick-Disconnect, Push-Pull Coupling with Lanyard H Accessory Thread.0.0.0 Grommet Extension Military No. M/ with pin contacts M/ with socket contacts Amphenol/Matrix No. MQ.00 To complete order number see how to order, page. Shell Size A Dia. E Dia. H Accessory Thread Class A.0.0.000-0 UNF 0.0.0.0- UNEF...00-0 UNEF.0..0-0 UNEF..0.0000-0 UNEF...0- UNEF 0...- UNEF.00..- UNEF...- UNEF Receptacle Adapter Required to mate the quick-disconnect plug with receptacle. Not furnished with the quick-disconnect plug; must be ordered separately. Note: Use Locktite Material on the threads for a permanent installation to the shell. Adapter How to Order Adapter by Proprietary Part Number 00-00-0X XX Finish Shell Size 00 designates aluminum, electroless nickel, Class R 0 designates aluminum, hard anodize, Class A 0 designates aluminum, cadmium plate, Class W 0 designates stainless steel, Class G How to Order Adapter by Military Part Number M/0 X XX Finish Shell Size R designates aluminum, electroless nickel, Class R A designates aluminum, hard anodize, Class A W designates aluminum, cadmium plate, Class W G designates stainless steel, Class G Mating Face of Receptacle Shell
Miniature Cylindrical MIL-C-, Series III Threaded and Quick-Disconnect Coupling how to order HOW TO ORDER BY MILITARY PART NUMBER MIL-C- SERIES III THREADED COUPLING AND QUICK-DISCONNECT COUPLING CONNECTORS M / R 0 0 N. Connector Type M designates MIL-C- Series III Connectors. Connector Style (Refer to military specification slashsheet number.) THREADED COUPLING CONNECTORS are designated by the following numbers: / wall mounting receptacle with socket contacts / wall mounting receptacle with pin contacts / jam nut receptacle with socket contacts / jam nut receptacle with pin contacts / standard straight plug with socket contacts / standard straight plug with pin contacts / straight plug with RFI grounding, socket contacts / straight plug with RFI grounding, pin contacts / straight plug with self-locking clutch plate, socket contacts / straight plug with self-locking clutch plate, pin contacts QUICK-DISCONNECT COUPLING CONNECTORS are designated by the following numbers: / straight plug without lanyard, pin contacts / straight plug without lanyard, socket contacts / straight plug with lanyard, pin contacts / straight plug with lanyard, socket contacts. Service Class For threaded and quick-disconnect coupling connectors: A aluminum shell, black non-conductive anodize finish, fluid resistant R aluminum shell, electroless nickel finish, fluid resistant G stainless steel shell, passivated, fluid resistant W aluminum shell, cadmium olive drab finish, corrosion/fluid resistant Consult Amphenol, Sidney, NY for the following additional classes of MIL-C-, Series III which are available in the Amphenol/Pyle versions.: Classes K, S, N - firewall, high temperature (00 C - 0 C) Classes H and Y - hermetics.,. Shell size and insert arrangement - See chart on page and pattern drawings that follow. Shell sizes thru are available in threaded coupling connectors. (However, note that size shell is not an MS connector, and should be ordered by proprietary number.) Shell sizes thru are available in quick-disconnect coupling connectors.. Keying Positions (rotation of master key/keyway of shell) Use N for normal. Use,,,, or Y for alternate keying positions. See page for descriptions. Clocking Positions (rotation of insert) Use,,, or for alternate clocking positions. See page for descriptions. HOW TO ORDER BY PROPRIETARY PART NUMBER MIL-C- SERIES III THREADED COUPLING AND QUICK-DISCONNECT COUPLING CONNECTORS MT R 0 0 P ***. Connector Type MT designates Amphenol /Matrix Threaded Coupling Connectors MQ designates Amphenol /Matrix Quick-Disconnect Coupling Connectors. Connector Style THREADED COUPLING CONNECTORS are designated by the following numbers: 0 wall mounting receptacle jam nut receptacle standard straight plug straight plug with RFI grounding fingers straight plug with self-locking clutch plate QUICK-DISCONNECT COUPLING CONNECTORS are designated by the following numbers: straight plug with lanyard straight plug without lanyard. Service Class For threaded and quick-disconnect coupling connectors: A aluminum shell, black non-conductive anodize finish, fluid resistant R aluminum shell, electroless nickel finish, fluid resistant G stainless steel shell, passivated, fluid resistant W aluminum shell, cadmium olive drab finish, corrosion/fluid resistant Consult Amphenol, Sidney, NY for the following additional classes of MIL-C-, Series III which are available in the Amphenol/Pyle versions.: Classes K, S, N - firewall, high temperature (00 C - 0 C) Classes H and Y - hermetics.,. Shell size and insert arrangement - See chart on page and pattern drawings that follow. Shell sizes thru are available in threaded coupling connectors. Shell sizes thru are available in quick-disconnect coupling connectors.. Contact Types P designates pin S designates socket. Keying Positions (rotation of master key/keyway of shell) Use,,,, or Y for alternate keying positions. See page for descriptions. Clocking Positions (rotation of insert) Use,,, or for alternate clocking positions. See page for descriptions.. Modification Number Consult Amphenol, Sidney, NY for information. For ordering information on accessories, such as protection caps and backshell hardware contact Amphenol Sidney NY
Miniature Cylindrical MIL-C-, Series III insert arrangement chart Shell Size/ Insert Arrangement INSERT ARRANGEMENTS Service Rating Total Contacts Not an MS layout. Connectors with these insert arrangements should be ordered by proprietary part number only. Shell size is available in threaded coupling connectors only. Contact Size 0 00 I 0 I 00 I 00 I 00 I 00 I 0 I I 0 I 0 I I I 0 I 0 0 I 0 I I I 0 I 0 I 0 I 0 I 0 I I I I I 0 0 0 I 0 I I See how to order for bayonet type connectors on page, and how to order for threaded and quick-disconnect type connectors on page. Insert arrangements are per MIL-STD-.
Miniature Cylindrical MIL-C-, Series III alternate positioning ALTERNATE KEYING POSITIONS (Rotation of key/keyway of shell) To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate keying positions are available as indicated in the chart below. The diagram shows the engaging view of a receptacle shell with keyways. The insert is rotated counter-clockwise relative to the centerline. Plug shells would be the opposite of this diagram. In the Normal insert position (position N), the insert center line coincides with the centerline of the master key/keyway of the shell. In the alternate keying positions (positions,,, and Y), the minor keys/lkeyways are positioned with reference to master key/keyway as indicated in the keying position table. Keying Positions Master Polarizing Keyway ALTERNATE CLOCKING POSITIONS (Rotation of insert) Alternate positioning is also available with the rotation of the insert. The diagram below shows the pin insert mating face. The centerline of the shell in the normal insert position (position N) coincides with the centerline of the master key/keyway in the shell. In alternate clocking positions, (positions,,, and ), the insert rotates relative to the centerline of the key/keyway of the shell. See E callout on diagram and the table for insert clocking. The socket insert is rotated clockwise, and the pin insert is rotated counter-clockwise. Master Keyway or Key of Shell (Plugs have keys, Receptacles have keyways) Insert Clocking C L E Insert Vertical Centerline A Socket Insert Mating Face Shown (Pin Insert is Opposite) B C Shown is Engaging Face View of Receptacle Shell with Keyways (Plug Shell Keys would be Opposite) KEYING POSITIONS Shell Polarizing Key/Keyway Positions Insert Size Position A B C D Position E thru N 0 0 0 0 0 0 & 0 0 0 0 0 0 0 0 0 0 only Y* 0 0 0 0,,, 0, 0,, 0 0 and 0 0 Y* 0 * Position Y supersedes inactive positions 0 and Z designations. D = Centerline of Shell INSERT CLOCKING POSITIONS Shell Polarizing Key/Keyway Positions Insert Size Position A B C D Position E N 0 0 0 0 0 0 & 0 0 0 0 0 0 0 0 0 0 0 0 0 N 0 0 0 0 0 0,,, 0 0 0, 0,, and 0 0 0 0 0 0 0 0 0 Note: Positions - are inactive for new designs per MIL-STD-.
Miniature Cylindrical MIL-C-, Series III contact arrangements front face of pin insert or rear face of socket insert illustrated Insert Arrangement 00 0 00 00 00 00 Service Rating I I I I I I Number of Contacts Contact Size 0 0 0 0 0 0 0 Insert Arrangement 0 0 0 Service Rating I I I I I Number of Contacts Contact Size 0 0 0 0 0 0 Insert Arrangement 0 0 Service Rating I I I I Number of Contacts 0 Contact Size 0 0 CONTACT LEGEND 0
Miniature Cylindrical MIL-C-, Series III contact arrangements front face of pin insert or rear face of socket insert illustrated 0 0 0 0 0 0 0 Insert Arrangement 0 0 Service Rating I I I I Number of Contacts Contact Size 0 0 0 0 0 0 0 0 0 0 0 Insert Arrangement 0 0 0 Service Rating I I I Number of Contacts Contact Size 0 0 0 0 0 0 0 0 Insert Arrangement Service Rating I I I Number of Contacts Contact Size 0 CONTACT LEGEND 0
Miniature Cylindrical MIL-C-, Series III contact arrangements front face of pin insert or rear face of socket insert illustrated 0 0 0 0 0 0 0 0 0 0 Insert Arrangement 0 Service Rating I Number of Contacts 0 Contact Size 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Insert Arrangement Service Rating I I I Number of Contacts 0 Contact Size 0 0 0 0 0 0 0 0 0 0 0 Insert Arrangement Service Rating Number of Contacts Contact Size Not an MS layout. Connectors with these insert arrangements can be ordered by proprietary part number only. Shell size is available in threaded coupling connectors only. See how to order for bayonet type connectors on page, and how to order for threaded and quick-disconnect type connectors on page. 0 CONTACT LEGEND 0
Miniature Cylindrical MIL-C-, Series III contact information, sealing plugs, crimping and insertion/removal tools MIL-C-, SERIES III CRIMP CONTACTS Contact Size Wire Range Socket Contacts Pin Contacts AWG mm Part Number Military Military Part Number 0-0 0.-0. M0/- M0/-0 0-0.-. M0/- M0/- - - M0/- M0/- CONTACT CURRENT RATING AND RETENTION Contact Size* Current Rating Amperes Voltage Drop Millivolts * Organize individual circuits to maintain heat rise within operating temperature requirements. Contact Retention lb. Axial Load 0. 0.0.0..0 0. N SEALING PLUGS Contact Size Military Part Number Sealing Plugs Amphenol/Matrix Part Number 0 MS-0 00-0-000 MS- 00-0-00 MS- 00-0-00 CRIMPING TOOLS Contact Size Wire Range Finished Wire Dia. Range AWG mm Inch mm 0-0 0.-0..00-.0.0-. Crimping Tool Part Number M0/-0 or M0/-0 Turret or Positioner Part Number M0/-0 or M0/-0 0-0.-..0-.0.-. M0/-0 M0/-0 - -.0-..-.0 M0/-0 M0/-0 INSERTION/REMOVAL TOOLS Contact Size Color Code Military Part Number Amphenol/Matrix Part Number 0 Red/White M/- 00-00-000 Blue/White M/-0 00-00-00 Yellow/White M/-0 00-00-00 Note: Each connector is furnished with contacts. One spare for inserts requiring to of each contact, two spares for inserts with more than contacts, and a minimum of one sealing plug up to 0% of the number of contacts.
Additional MIL-C-, Series III Miniature Cylindrical Connectors offered by Amphenol Amphenol offers additional connector product lines within the family of MIL-C-, Series III under the Pyle-National brands. These products are shown in detail in the Amphenol/Pyle catalog, MS-0, which can be supplied upon request. Each series offers varying design characteristics and customer options to provide users with the highest level of flexibility. The additional products offered through the Pyle designations of Amphenol products are briefly described as follows: Class K Firewall Pyle-National offers Class K MIL-C-, Series III connectors which have corrosion-resistant, stainless steel, passivated shells. These connectors incorporate non-flammable, hard dielectric, fluid resistant inserts, and they have high temperature capability up to 00 C. High Temperature/European Specification Versions Offered under the Pyle designation, there are high temperature versions (up to 0 C) of MIL-C-, Series III that meet the following specifications: Boeing BACCCM/CN Firewall, and Pyle equivalent BSK versions ESC/Pyle HTK Series - 00% scoop-proof version/ high temperature AECMA designation - EN ESC0, /, /, / Rolls Royce Standards Aerospatiale, ASN-EOX Class KE/SE General Electric M0TF Amphenol /Pyle ESC0, /, / and / are available from Amphenol Hermetic MIL-C-, Series III Hermetics are available under Pyle designation part numbers. Shell styles are: square flange receptacles, D-hole mounted receptacles, and solder mount receptacles. These are stainless steel, passivated, and are temperature capable for up to 00 C. Additional contact options Pyle offers additional options for MIL-C-, Series III connectors which include shielded twinax and thermocouple types. For further information on these Amphenol/Pyle products, or any specific applications consult Amphenol, Sidney, NY.