WALL VENTILATION GRILLES CBP

Similar documents
Ventilation grilles for installation into walls, sills or rectangular

Ceiling swirl diffusers

Ventilation grilles for installation into walls, sills or rectangular

Ceiling diffusers. Type VDR. For large temperature differences in heating mode, high penetration of air, with adjustable air control blades

Ventilation grille Model AL

Slot diffusers, Round duct diffusers. IMP Klima

Ceiling swirl diffusers

Ceiling Slot Diffuser Model DSX

Round duct diffuser DBB-RR

Ceiling swirl diffusers with perforated face plate

WGA Long throw nozzle grille

Type DCS FOR HORIZONTAL SWIRLING SUPPLY AIR DISCHARGE CREATING HIGH INDUCTION LEVELS, WITH FIXED AIR CONTROL BLADES

Round duct grille Model KG-RR

SLOT DIFFUSERS, ROUND DUCT DIFFUSERS

NSDZ. Swirl diffusers with adjustable air control blades

Nozzle Jet Diffuser Model DSA

Ventilation grilles for installation into walls, sills or rectangular

Compact Grille Model KG

Incorporating V2.0. Product spec >>> > Series DJ - Drum jet diffusers

Ventilation Grille PA

Ceiling swirl diffusers with perforated face plate

Ventilation grilles for installation into walls, sills or rectangular

Ventilation grille Model IB-R

Ceiling diffuser 4DE

BP - Floor grilles E-04/07

ceiling swirl diffuser Model DQJA / DQJR

Ceiling diffuser 4DF

Type VDL FOR HIGH ROOMS, WITH ADJUSTABLE AIR CONTROL BLADES. Homepage > Products > Air Diffusers > Swirl diffusers > Type VDL

Swirl Diffuser Model DQF

Ceiling Slot Diffuser DSC

DRUM SLOT DIFFUSER TYPE: RT350

Ceiling Slot Diffuser DSC

Product Nomenclature G-X-AB-Z 0 = Zero Degree, 1 = 15 Degree, 2 = 15 Degree (2-way)

Swirl Diffuser DHV Contents Description...3 Models and dimensions...4 Technical data...8

Ceiling swirl diffusers

series 90-GV Variable geometry units

SUPPLY AND RETURN AIR GRILLES TYPE: AS/GS120 AS/GS130

LINEAR SLOT DIFFUSERS

DFB - Conical Ceiling Diffuser. Halton DFB. Conical Ceiling Diffuser

ceiling swirl diffuser DQJ

Disc valves. Type Z-LVS. For supply air. 03/2017 DE/en PD Z-LVS 1

Catalog Swirl diffuser DAL 359

Series KSG 1. Security Grilles INDEX

C O L M A N. Air Distribution JET DIFFUSERS DCJ SERIES DCJ SERIES

PRODUCT BROCHURE. Rectangular Displacement Diffuser RDW-FD RDW-FD : smartemp.com

Multicore diffusers. introduction. type control. options. finish. sizes SQUARE AND RECTANGULAR DIFFUSERS

PURELINE18 PARTICULARLY SLIM DIFFUSER FACE, AVAILABLE IN NUMEROUS VARIANTS FOR MANY DIFFERENT INSTALLATION SITUATIONS

DRUM JET DIFFUSERS TYPE: DJA DJB DJAP DJBP

Ceiling Swirl Diffuser DQJ

Ceiling impulse diffuser Model PIL

Ceiling Slot Diffuser DSC

Ceiling induction diffuser DISA-300

Type WG. External weather louvre made of galvanised steel sections FOR THE MOST DIVERSE APPLICATIONS, AVAILABLE ALSO IN LARGE SIZES

INDEX. Chapter1 1. A. Jet diffusers 1. Jet diffuser...: AJD-P

Slot diffusers for ceiling installation

DSC-PLASTER Slot diffuser for plasterboard ceilings

Ceiling induction diffuser DISA-601

DRUM JET DIFFUSERS. Available in Aluminium & Stainless Steel

Accessories. Front vane panel Coupling sleeve with gasket Galvanised steel Gasket of rubber compound

TRB - Conical Ceiling Diffuser. Halton TRB. Conical Ceiling Diffuser

For installation into ductwork

ISF-AD. Inclined Floor Swirl Diffuser PRODUCT BROCHURE. Optional Features: Constant throw height adjustable airflow rate Electrical VAV operation

series KLR Linear slot diffusers

Long Throw Nozzle WDA

DFA - Conical Ceiling Diffuser. Halton DFA. Conical Ceiling Diffuser

THL - Conical Ceiling Diffuser. Halton THL. Conical Ceiling Diffuser

NSAL(N) Aluminum slot diffusers

series Linear grilles

Nozzle diffuser DYRH / Supply air unit DYRB (=DYRH+ATTD)

Catalog Swirl diffuser DAL 358

2/1/EN/3. Slot Diffuser. Type VSD15. with 15 mm wide diffuser face

Supply air unit DYBA. Specifications. Connbox. Quick Selection DYBA, without slot, 1:3 plenum box ATTC (50 Pa)

DCS - Ceiling Diffuser. Halton DCS. Ceiling Diffuser

MADEL. RMT eggcrate grilles. klin SYSTEM. The RMT-A series grilles are designed to be used in air-conditioning, ventilation, and heating.

Wall diffuser SVQC / Supply air unit SVQC + ATVA TECHNICAL DATA

Exhaust air diffuser HPKH + Plenum box ATTS

Grilles & Diffusers. Series NV Non-vision grilles. Incorporating. Sight blocking design ensures privacy is maintained

SERIES JN GILBERTS. Jet Diffusers. Features PUBLICATION DIFFUSERS 8 JUNE 2007

GDD - Supply Grille. Halton GDD. Supply Grille

SERIES H. Heavy Duty Adjustable Deflection Grilles

LINEAR BAR GRILLES. GRILLES-Linear Bar

Accessories. Balancing plenum PRI For balancing & equalising the airflow and attenuating the duct noise

Floor Swirls Models BZD and SZD

MADEL. DMT fixed blades return grilles at 45º. klin SYSTEM. The DMT series grilles are designed to be used in extractors of cold and hot air.

DKR - Multi-nozzle Ceiling Diffuser. Halton DKR. Multi-nozzle Ceiling Diffuser

1/3/EN/4. Ventilation Grilles Types TRS-K TRS-R TRSE-R

INDEX. Chapter3. air master. Linear Bar Grilles

Aircell Polymer Range

Catalog Linear Diffuser SAL 50

KTI Supply air valve. Product Facts. Product code example. Quick Selection

Linear Floor Grilles Models FG, F20, F25 and FRO

SERIES K GILBERTS. Fixed Blade Grilles. Features

EX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES.

SERIES K. Fixed Blade Grilles

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CD SERIES SERIES

CornerAir. CornerAir. Active chilled beam

CAV controllers. Type VFL. Volume flow limiter for insertion into ducting PD VFL 1

HIGH CAPACITY LINEAR SLOT DUFFUSERS

HDF - Exhaust Grille. Halton HDF. Exhaust Grille

Supply air diffusers RHKH and RHOH / Supply air units RHKB/RHOB (=RHKH/RHOH+ATTD)

Transcription:

WALL VENTILATION GRILLES CBP 01.10-01 CBP WALL VENTILATION GRILLES Description Designed for ventilation and air-conditioning installations, where control of air flow and direction of the air is required. Construction Constructed of extruded aluminium profiles with powder coating. Consist of decorative part frame with incorporated horizontal (-Х), vertical (-В) or double directed lamellas (-II). The lamellas can be movable, thus allowing air distribution in one or two directions, or immovable (-Н). Easy air flow regulation is provided by a multi blade damper (+М). Grilles are constructed of two types of profiles: L-profile (+L) or rounded type profile. Powder coating in RAL 9010 as a standard, upon customer s request painting in all RAL colours is possible. Installation To the air duct system with: Plenum box and flexible ducts. Directly joined to the air duct. Directly joined to building elements. Accessories Multi blade damper (+M) Standard plenum box with side connector (+K) Regulation damper (+D) Internal insulation (+Ii) or external insulation (+Ie) of the plenum box. 35

01.10-02 CBP WALL VENTILATION GRILLES Overall and joined dimensions Note: Without regulation damper, L = 70 mm Plenum boxes with top connector and different dimensions can be produced on request. 1. Wall ventilation grille with horizontal lamellas 2. Wall ventilation grille with vertical lamellas 3. Wall ventilation grille with horizontal and vertical lamellas (double direction) 4. Multi blade damper 5. Standard plenum box 6. Regulation damper Free cross section F 0 [m 2 ] B [mm] 125 225 325 425 A [mm] 125 0.010 225 0.020 0.040 325 0.030 0.060 0.090 425 0.040 0.080 0.120 0.160 525 0.050 0.100 0.150 0.200 625 0.060 0.120 0.180 0.240 825 0.080 0.160 0.240 0.320 1025 0.100 0.200 0.300 0.400 1225 0.120 0.240 0.360 0.480 Selection of plenum box Free cross section F 0 [m 2 ] Air flow [m 3 /h] H [mm] H 1 [mm] ØD [mm] L [mm] to 0.025 100 200 230 120 120 140 to 0.039 200 400 230 120 145 140 to 0.069 400 600 280 120 195 190 to 0.099 600 1000 330 150 245 240 over 0.100 over 1000 330 150 245 240 36

WALL VENTILATION GRILLES CBP 01.10-03 Air supply Air velocity at distance L W L [m/s] W L = f(w 0, L, b), where: W 0 velocity in the free cross section W 0 = V/3600.F 0 [m/s] L distance from the grille b distance to the ceiling h height of the grille W L [m/s] without ceiling effect (b>300 mm), h=0.125 m 1 0.50 0.35 0.29 0.25 0.22 2 1.00 0.71 0.58 0.50 0.45 3 1.50 1.06 0.87 0.75 0.67 4 2.00 1.41 1.15 1.00 0.89 5 2.50 1.77 1.44 1.25 1.12 W L [m/s] with ceiling effect (b<300 mm), h=0.125 m 1 0.77 0.59 0.51 0.46 0.42 2 1.54 1.19 1.02 0.92 0.84 3 2.31 1.78 1.53 1.38 1.27 4 3.08 2.38 2.04 1.83 1.69 5 3.86 2.97 2.55 2.29 2.11 W L [m/s] without ceiling effect(b>300 mm), h=0.225 m 1 0.67 0.47 0.39 0.34 0.30 2 1.34 0.95 0.77 0.67 0.60 3 2.01 1.42 1.16 1.01 0.90 4 2.68 1.90 1.55 1.34 1.20 5 3.35 2.37 1.94 1.68 1.50 W L [m/s] with ceiling effect (b<300 mm), h=0.225 m 1 0.96 0.74 0.64 0.57 0.53 2 1.92 1.48 1.27 1.14 1.05 3 2.88 2.22 1.91 1.71 1.58 4 3.85 2.96 2.55 2.29 2.10 5 4.81 3.71 3.18 2.86 2.63 W L [m/s] without ceiling effect (b>300 mm), h=0.325 m 1 0.81 0.57 0.47 0.40 0.36 2 1.61 1.14 0.93 0.81 0.72 3 2.42 1.71 1.40 1.21 1.08 4 3.22 2.28 1.86 1.61 1.44 5 4.03 2.85 2.33 2.02 1.80 W L [m/s] with ceiling effect (b<300 mm), h=0.325 m 1 1.00 0.85 0.73 0.66 0.60 2 2.00 1.70 1.46 1.31 1.21 3 3.00 2.55 2.19 1.97 1.81 4 4.00 3.40 2.92 2.62 2.41 5 5.00 4.25 3.65 3.28 3.02 W L [m/s] without ceiling effect (b>300 mm), h=0.425 m 1 0.92 0.65 0.53 0.46 0.41 2 1.84 1.30 1.06 0.92 0.82 3 2.77 1.96 1.60 1.38 1.24 4 3.69 2.61 2.13 1.84 1.65 5 4.61 3.26 2.66 2.30 2.06 W L [m/s] with ceiling effect (b<300 mm), h=0.425 m 1 1.00 0.94 0.81 0.73 0.67 2 2.00 1.88 1.62 1.45 1.33 3 3.00 2.82 2.42 2.18 2.00 4 4.00 3.76 3.23 2.90 2.67 5 5.00 4.70 4.04 3.63 3.34 37

01.10-04 CBP WALL VENTILATION GRILLES NON-ISOTHERMAL HORIZONTAL JET Without ceiling effect Jet path at distance L, ±y, m Heating y = f(, W 0, L), where: temperature difference = T floor - Т amb Cooling W 0 velocity in the free cross section L distance from the grille h height of the grille y [m] without ceiling effect, h=0.125 m [ C] 5 0.64 5.12 - - - 1 10 1.28 - - - - 15 1.92 - - - - 5 0.16 1.28 4.32 - - 2 10 0.32 2.56 - - - 15 0.48 3.84 - - - 5 0.07 0.57 1.92 4.55-3 10 0.14 1.14 3.84 - - 15 0.21 1.71 - - - 5 0.04 0.32 1.08 2.56 5.00 4 10 0.08 0.64 2.16 5.12-15 0.12 0.96 3.24 - - 5 0.03 0.20 0.69 1.64 3.20 5 10 0.05 0.41 1.38 3.28-15 0.08 0.61 2.07 4.92 - y [m] without ceiling effect, h=0.225 m [ C] 5 0.36 2.84 - - - 1 10 0.71 - - - - 15 1.07 - - - - 5 0.09 0.71 2.40 5.69-2 10 0.18 1.42 4.80 - - 15 0.27 2.13 - - - 5 0.04 0.32 1.07 2.53 4.94 3 10 0.08 0.63 2.13 5.06-15 0.12 0.95 3.20 - - 5 0.02 0.18 0.60 1.42 2.78 4 10 0.04 0.36 1.20 2.84 5.56 15 0.07 0.53 1.80 4.27-5 0,01 0,11 0,38 0,91 1,78 5 10 0.36 2.84 - - - 15 0.71 - - - - y [m] without ceiling effect, h=0.325 m [ C] 5 0.25 1.97 6.65 - - 1 10 0.49 3.94 - - - 15 0.74 - - - - 5 0.06 0.49 1.66 3.94-2 10 0.12 0.98 3.32 - - 15 0.18 1.48 4.98 - - 5 0.03 0.22 0.74 1.75 3.42 3 10 0.05 0.44 1.48 3.50-15 0.08 0.66 2.22 5.25-5 0.02 0.12 0.42 0.98 1.92 4 10 0.03 0.25 0.83 1.97 3.85 15 0.05 0.37 1.25 2.95 5.77 5 0.01 0.08 0.27 0.63 1.23 5 10 0.02 0.16 0.53 1.26 2.46 15 0.03 0.24 0.80 1.89 3.69 y [m] without ceiling effect, h=0.425 m [ C] 5 0.19 1.51 5.08 - - 1 10 0.38 3.01 - - - 15 0.56 - - - - 5 0.05 0.38 1.27 3.01 5.88 2 10 0.09 0.75 2.54 6.02-15 0.14 1.13 3.81 - - 5 0.02 0.17 0.56 1.34 2.61 3 10 0.04 0.33 1.13 2.68 5.23 15 0.06 0.50 1.69 4.02-5 0.01 0.09 0.32 0.75 1.47 4 10 0.02 0.19 0.64 1.51 2.94 15 0.04 0.28 0.95 2.26 4.41 5 0.01 0.06 0.20 0.48 0.94 5 10 0.02 0.12 0.41 0.96 1.88 15 0.02 0.18 0.61 1.45 2.82 Note: In cases where no value is specified, the deviation is more than 6m. 38

WALL VENTILATION GRILLES CBP 01.10-05 NON-ISOTHERMAL HORIZONTAL JET Temperature ratio at distance L ΔT L [ C] ΔT L [ C], h=0.125 m 2 1.7 2.6 3.5 4.3 6.5 8.7 4 1.2 1.8 2.4 3.1 4.6 6.1 6 1.0 1.5 2.0 2.5 3.7 5.0 8 0.9 1.3 1.7 2.2 3.2 4.3 10 0.8 1.2 1.5 1.9 2.9 3.9 ΔT L [ C], h=0.325 m 2 2.8 4.2 5.6 7.0 10.5 13.9 4 2.0 3.0 3.9 4.9 7.4 9.9 6 1.6 2.4 3.2 4.0 6.0 8.1 8 1.4 2.1 2.8 3.5 5.2 7.0 10 1.2 1.9 2.5 3.1 4.7 6.2 ΔT L [ C], h=0.225 m 2 2.3 3.5 4.6 5.8 8.7 11.6 4 1.6 2.5 3.3 4.1 6.2 8.2 6 1.3 2.0 2.7 3.4 5.0 6.7 8 1.2 1.7 2.3 2.9 4.4 5.8 10 1.0 1.6 2.1 2.6 3.9 5.2 ΔT L [ C], h=0.425 m 2 3.2 4.8 6.4 8.0 12.0 15.9 4 2.3 3.4 4.5 5.6 8.5 11.3 6 1.8 2.8 3.7 4.6 6.9 9.2 8 1.6 2.4 3.2 4.0 6.0 8.0 10 1.4 2.1 2.9 3.6 5.3 7.1 NON-ISOTHERMAL VERTICAL JET maximal vertical penetration depth y [m] y = f(w 0, ), where: temperature difference W 0 velocity in free cross section 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 3.1 4.5 6.0 7.5 9.0 10.6 12.0 10.0 2.3 3.4 4.3 5.3 6.2 7.5 8.6 15.0 1.7 2.6 3.5 4.4 5.1 6.2 7.0 20.0 1.4 3.8 3.0 3.8 4.4 5.3 6.0 PRESSURE DROP AND NOISE LEVEL [db(a)] Without blade damper With blade damper, open 100% With blade damper, open 50% With blade damper, open 25% 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 ΔP [Pa] - - - 6 9 12 16 20 25 L [db(a)] - - - 26 32 35 37 40 43 ΔP [Pa] - - - 3 5 6 10 15 20 L [db(a)] - - - 20 25 27 35 39 42 ΔP [Pa] - - 4 8 8 14 20 30 - L [db(a)] - - 24 28 30 35 40 45 - ΔP [Pa] - 8 12 18 30 35 50 - - L [db(a)] - 25 28 35 40 42 48 - - 39

01.10-06 CBP WALL VENTILATION GRILLES Order designation CBP -L -H - X +M 625 / 125 Joined height: 125, 225, 325, 425 Joined length: 125, 225, 325, 425, 525, 625, 825, 1025, 1225 +М multi blade damper X horizontal lamellas B vertical lamellas II second direction section -H immovable lamellas -L profile type L. Wall ventilation grille Plenum box ( CBP-L-H-X+M 625/125 ) +D +Ii +Ii internal plenum box insulation +Ie external plenum box insulation +D Regulation damper Grille type and size - Main parameters - Optional parameters 40