Table of Contents Parts Manual NTA-607/NTA-2007 Spartan II No-Till Drill Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! 38331 Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 10/11/17 166-431P
Table of Contents Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Cart Frame...6 Tongue to Frame...6 Walkboard...8 Hub and Wheel Without Brakes...12 Hub and Wheel with Brakes...14 150 Bushel Bin Assembly...16 150 Bushel Bin Mounting...18 Dual 82 Bushel Bin Assembly...20 Dual 82 Bushel Bin Mounting...22 Brakes...24 Air Brakes...24 Hydraulic Brakes...26 Parking Brakes...28 Fan & Air System...30 Fan Mounting Dual 82 Bushel...30 150 Bushel Bin Meter Mounting...34 Fan Mounting 150 Bushel...36 Meter Box Assembly...40 Meter Shaft Assembly...44 Cart Hydraulics...46 Cart Hydraulics with Dual Hoppers...46 Cart Hydraulics with One Hopper...48 Implement Frame...50 Implement Hitch...50 Implement Lift Assist to Frame...52 Rear Implement Lift Assist...54 Implement Weight Bracket Mounting...56 Implement Wing to Frame...58 Gauge Wheel Assembly...60 Gauge Wheel Scaper...62 Rear Transport Wheels...64 Implement Hydraulics...66 Center and Right Wing...66 Left Wing Hydraulics...70 Hydraulic Cylinder (810-171P)...72 Hydraulic Cylinder (810-201C)...74 Hydraulic Cylinder (810-219C)...76 Hydraulic Cylinder (810-412C)...78 Hydraulic Cylinder (810-638C)...80 Hydraulic Bypass Valve (810-432C)...82 Pressure Reducing Valve (810-349C)...84 Relief Valve (810-348C)...86 Openers...88 Opener Body...88 Coulter...90 Fertilizer Hose...92 Seed-Lok (Option)...94 Press Wheels...96 1" x 12" Double Press Wheel...96 1.25" x 13.5" Double Press Wheel...98 3 " x 13" V-Crown Press Wheel...100 Press Wheel Scraper...102 Towers...104 Tower Assembly...104 Tower Mounting...106 Lights and Decals 2007-02...108 Cart Decals...108 Implement Decals...110 Implement Lights...112 Lights and Decals 607-2...114 Cart Decals...114 Implement Decals...116 Cart Lights...118 Implement Lights...120 Monitor...122 Monitor...122 Marker...124 Marker Assembly...124 Marker Hydraulics...126 Marker Disk And Hub (113-563S)...128...130 Copyright 2017 All rights reserved Printed 10/11/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 166-431P - 2-10/11/17
Table of Contents Alphabetized Table of Contents Selected Models 1 1" x 12" Double Press Wheel...96 1.25" x 13.5" Double Press Wheel...98 150 Bushel Bin Assembly...16 150 Bushel Bin Meter Mounting...34 150 Bushel Bin Mounting...18 3 3 " x 13" V-Crown Press Wheel...100 A Air Brakes...24 C Cart Decals...108 Cart Hydraulics with Dual Hoppers...46 Cart Hydraulics with One Hopper...48 Cart Lights...118 Center and Right Wing...66 Coulter...90 D Dual 82 Bushel Bin Assembly...20 Dual 82 Bushel Bin Mounting...22 F Fan Mounting 150 Bushel...36 Fan Mounting Dual 82 Bushel...30 Fertilizer Hose...92 G Gauge Wheel Assembly...60 Gauge Wheel Scaper...62 L Left Wing Hydraulics...70 M Marker Assembly...124 Marker Disk And Hub (113-563S)...128 Marker Hydraulics...126 Meter Box Assembly...40 Meter Shaft Assembly...44 Monitor...122 O Opener Body...88 P Parking Brakes...28 Press Wheel Scraper...102 Pressure Reducing Valve (810-349C)...84 R Rear Implement Lift Assist...54 Rear Transport Wheels...64 Relief Valve (810-348C)...86 S Seed-Lok (Option)...94 T Tongue to Frame...6 Tower Assembly...104 Tower Mounting...106 W Walkboard...8 H Hub and Wheel with Brakes...14 Hub and Wheel Without Brakes...12 Hydraulic Brakes...26 Hydraulic Bypass Valve (810-432C)...82 Hydraulic Cylinder (810-171P)...72 Hydraulic Cylinder (810-201C)...74 Hydraulic Cylinder (810-219C)...76 Hydraulic Cylinder (810-412C)...78 Hydraulic Cylinder (810-638C)...80 I Implement Decals...110 Implement Hitch...50 Implement Lift Assist to Frame...52 Implement Lights...112 Implement Weight Bracket Mounting...56 Implement Wing to Frame...58 10/11/17-3 - 166-431P
Table of Contents 166-431P - 4-10/11/17
Table of Contents 10/11/17-5 - 166-431P
Tongue to Frame Table of Contents 38172 166-431P - 6-10/11/17
Table of Contents Cart Frame Tongue to Frame Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. dwg 38172 166-427H 166-437H 891-277C 890-246C 166-418H 166-419H 802-544C 804-030C 803-034C 166-420L 842-032C 804-242C 266-148D 802-079C 804-011C 803-078C 807-073C 802-091C 804-017C 804-015C 803-020C 817-516C 802-005C 817-042C 803-088C 118-652D 806-156C 804-010C 804-009C 803-008C 802-212C 804-008C 804-023C 803-027C 266-455D 806-263C 804-013C 803-014C 802-099C 166-368H 805-134C 804-028C 805-058C 401-167H 803-073C 805-412C 402-011D 802-152C 803-007C 163-118D 806-010C 804-015C 803-020C 802-370C 803-088C 890-398C 802-543C Image No. 607 HITCH WELDMENT CART FRAME WELDMENT CAT 3 RING-SCHARMULLER SCREW JACK 5000# 15-30 SD-WND JACK FOOT WELDMENT HITCH WELDMENT HHCS 1 1/4-7X9 GR5 SPTHD WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT HITCH ASM HHCS M20X2.5X70 GR8.8 WASHER LOCK M20 PLT HOSE RETAINER HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT NUT LOCK 3/8-16 NYLON INSERT SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 USS PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT MANUAL PAK 1" W/ GASKET HHCS 1/4-20X1 GR5 MINI END WHEEL PRESS WHEEL NUT HEX LOCK 1/4-20 FLG MANUAL PAK MOUNT U-BOLT 5/16-18 X 4 1/32 X 5 WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HHCS 3/4-10X2 1/2 GR5 WASHER FLAT 3/4 HARD USS WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT TANK MOUNT U-BOLT 3/8-16 X 4 1/32 X 5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 1/2-13X3 1/4 GR5 NTA2007 PULL BAR PIN CLVS 1.0X2.45 USBL WASHER FLAT 1 USS PLT PIN COTTER 3/16 X 2 16 ROW PULLBAR ADJUSTER NUT HEX 1 1/2-6 PLT PIN CLVS 1.0X4.06 USBL SLEEVE, SPRING LINK MOUNT HHCS 1/4-20X2 GR5 NUT LOCK 1/4-20 PLT RADAR MOUNT U-BOLT 1/2-13 X 2 1/2 X 3 1/2 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 1/4-20X1 3/4 GR5 NUT HEX LOCK 1/4-20 FLG SAFETY CHAIN 40000 LB HHCS 1 1/4-7X10 GR5 SPTHD INCLUDES 3 AND 6 10/11/17-7 - 166-431P
Walkboard Table of Contents 38176 166-431P - 8-10/11/17
Walkboard Table of Contents Cart Frame Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. dwg 38176 166-437H 266-144D 166-380H 266-145D 266-127D 248-465D 266-456D 266-146D 248-451D 266-330D 817-622C 166-425H 816-702C 266-214D 890-221C 266-141D 802-155C 804-011C 804-013C 803-014C 802-024C 803-078C 802-143C 803-078C 802-023C 802-079C 266-080D 800-121C 803-199C 166-690D 807-087C 800-051C 166-293H 266-142D 266-333D 266-143D 266-331D 266-332D 266-341D 817-925C 802-038C 803-147C 804-094C 802-382C 802-017C 266-216D 266-215D 266-398D 266-130D 266-468D 266-802D 802-163C 802-283C 803-001C 803-006C Image No. CART FRAME WELDMENT HAND RAIL R.H. END HANDRAIL WLMT HAND RAIL CROSS TUBE FRONT CENTER HANDRAIL FRONT HANDRAIL MNT PLT DECAL BOARD CENTER HANDRAIL RETAINER REAR HANDRAIL CAP-PLUG LADDER GRAB RAIL TUBE CAP 1 1/4 ID TB X 3 LG 607 LADDER WLMT EDGE TRIM FOR NTA607 HANDLE NARROW WALKBOARD EXT X 107 12-20 x 90 LB GAS SPRING WALKBOARD 17.25 X 107 1/2 RHSNB 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 3/8-16X3 GR5 NUT LOCK 3/8-16 NYLON INSERT HHCS 3/8-16X2 GR5 NUT LOCK 3/8-16 NYLON INSERT HHCS 3/8-16X1 3/4 GR5 HHCS 3/8-16X1 1/4 GR5 CART WALKBOARD AND HANDRAL MNT BALL STUD 10MM X 5/16-18 UNC NUT HEX FLANGE 5/16-18 PLT PLUNGER LOCK PIN SPRING COMP 1/2 OD X.052 W RING, SPLIT 1-1/4 I.D. HANDRAIL MOUNT WELDMENT LADDER MOUNT RIGHT HAND WALKBOARD MOUNT INSIDE SIGN BRACKET WHEEL CHOCK MOUNTING PLATE WHEEL CHOCK OFFSET MOUNT WHEEL CHOCK TOP PLATE WHEEL CHOCK HHCS 1/2-13X2 1/4 GR5 NUT HEX NYLOCK 1/2-13 WASHER FLAT 1/2 HARD ASTMF436 HHCS 3/8-16X2 1/4 GR5 HHCS 3/8-16X1 GR5 NARROW WALKBOARD EXT CTR MNT NARROW WALKBOARD EXT END MNT EXT WALKBOARD GAS SPRING MNT CALIBRATION BAG BOX DOOR CALIB BAG BOX TOP CALIBRATION BAG BOX BOTTOM HHCS #10-24X1/2 GR5 HHCS 1/4-20X1/2 GR2 NUT HEX 10-24 PLT NUT HEX 1/4-20 PLT Used on single hopper carts along with #16. Used on both single and double hopper carts. Used on single hopper carts. Used on single hopper carts. Used on single hopper carts. 10/11/17-9 - 166-431P
Table of Contents Walkboard (continued) Ref. 56. 57. 58. 59. 60. 61. Part No. 804-006C 804-054C 805-155C 891-459C 891-209C 816-736C Part Description WASHER LOCK SPRING 1/4 PLT WASHER LOCK #10 PIN WIRE RETAIN 5/16 X 2 1/2 LANYARD 3/64 X 6 EYE-LOOP DIGITAL SCALE 50 LB/23 KG CULT DRILL CALIBRATION BAG Comments Revision 166-431P - 10-10/11/17
Table of Contents Cart Frame Walkboard (continued) This Page Intentionally Left Blank 10/11/17-11 - 166-431P
Table of Contents Hub and Wheel Without Brakes (Applies to NTA-2007 only) 38313 166-431P - 12-10/11/17
Table of Contents Cart Frame Hub and Wheel Without Brakes (Applies to NTA-2007 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. dwg 38313 Image No. 166-287H TELESCOPING CART AXLE 168-380K 23.5/55-26 TIRE/20-10BLT WL 168-381K 23.5/55-26 TIRE/20-10BLT WL 168-389K ADC2350 10 BOLT HUB AND SPINDL 815-286C ADC 2350 SPINDLE 10 BLT 12000# GKN-P301808 SPINDLE WASHER GKN ARMSTRONG 803-175C NUT HEX SLOTTED 1 1/4-12 PLAIN 805-060C PIN COTTER 7/32 X 2 815-188C HUB ASSY 10 BOLT 12000# 802-007C HHCS 5/16-18X3/4 GR5 GKN-P502016 HUB CAP GKN ARMSTRONG GKN-P602150 RUBBER GASKET GKN ARMSTRONG 822-047C BRG CONE 1.75IDX1.15WD #460 822-051C BRG CUP 4.25ODX.87WD #453A 803-183C NUT HEX FLANGE 3/4-16 PLT 802-171C HUB STUD 3/4-16X2 9/16 GR5 GKN-L871401-10 HUB 10-BOLT MACHINED CASTING 822-052C BRG CUP 4.43ODX.93WD #39520 822-204C BRG CONE 2.50ID #39585 GKN-P602128 GREASE SEAL GKN ARMSTRONG 802-205C HHCS 1-8X5 1/2 GR5 803-316C NUT HEX LOCK 1-8 PLT 814-210C VALVE STEM METAL TR-575 TUBLES Used on left side Used on right side Includes 5 and 9 Includes 6-8 Includes 10-20 10/11/17-13 - 166-431P
Table of Contents Hub and Wheel with Brakes 38179 166-431P - 14-10/11/17
Table of Contents Cart Frame Hub and Wheel with Brakes Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. dwg 38179 814-617C 814-616C 814-618C 815-510C 802-783C 803-038C 266-147D 266-438D 800-085C 166-423H 814-619C 166-424A Image No. 26.5 X 20 X 335MM BC RIM 600/55-26.5 TIRE 600/55-26.5 WHEEL ASM LH NTA607 BRAKE AXLE ASM HHCS 1-8X9 GR8 PLT NUT HEX 1-8 NYLON INSERT PLT AXLE CLAMP TUBE SPACER AXLE RETAINER PIN SNAP RING EXT 1 HEAVY AXLE HOUSING WDMT 600/55-26.5 WHEEL ASM RH BRAKE AXLE ASM Includes 1 and 2 Includes 1 and 2 Includes 4, 8, 9 & 10 10/11/17-15 - 166-431P
Table of Contents 150 Bushel Bin Assembly 38188 166-431P - 16-10/11/17
Table of Contents Cart Frame 150 Bushel Bin Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. dwg 38188 802-469C 804-025C 817-129C 167-282D 167-020H 803-147C 802-130C 807-268C 803-014C 804-012C 801-235C 167-283D 167-048H 805-169C 802-039C 167-035H 167-016H 167-123H 167-285D 802-453C 167-133H 806-077C 804-136C 803-209C 817-602C 802-079C 804-011C 802-224C 167-131H 806-192C 266-218D 804-010C 803-084C 800-125C 990-082R 166-300K 803-006C 804-006C 804-075C 168-465H 841-229C 803-078C 802-005C 804-117C 890-179C Image No. HHCS 3/4-10X8 GR5 PLT WASHER FLAT 3/4 SAE PLT FLNG BUSHING 1 1/8 X 1 X 3/4 LID SWIVEL INNER PIVOT TUBE LID SWIVEL WELDMENT NUT HEX NYLOCK 1/2-13 HHCS 1/2-13X2 1/2 GR5 SPRING COMP DIE.75X.375X1.50L NUT HEX 3/8-16 PLT WASHER FLAT 3/8 SAE PLT SCR HX SKT BUT CP 3/8-16X2 1/2 BIN LID TOP CROSS BAR AIR DRILL BIN LID HANDLE WLMNT PIN ROLL 1/2 X 1 3/4 HHCS 1/2-13X3 GR5 AIR DRILL BIN LID HOOK ROUND BIN LID WELDMENT STRAINER BASKET WELDMENT ADC2350 BIN LID SEAL RHSNB 3/8-16X1 1/2 GR5 LID FLANGE WELDMENT U-BOLT 3/8-16 X 2 5/8 X 3 1/4 WASHER FLAT 3/8 NEOPRENE PLT NUT FLANGE LOCK 3/8-16 PLT 150 BU SEED HOPPER NO LID HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT HHCS 1/4-20X1 1/4 GR5 150BU BIN LADDER U-BOLT 5/16-18X1 1/2X2 1/2 RND 150BU LADDER MOUNT WASHER FLAT 5/16 USS PLT NUT HEX NYLOCK 5/16-18 PLT CLAMP WRM DRV#28 SS(1.31-2.25) HOSE 1 ID 200PSI EPDM 4-OUTLET METER ASSEMBLY NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 USS PLT METER MOUNT WELDMENT AD 1/8MNPT 3/16 HOSE BARB NUT LOCK 3/8-16 NYLON INSERT HHCS 1/4-20X1 GR5 WASHER FLAT 1/4 HARD ASTMF436 SILICON 35YR CLEAR 10 OZ Refer to Meter Box Assembly for Breakdown 10/11/17-17 - 166-431P
Table of Contents 150 Bushel Bin Mounting 38192 166-431P - 18-10/11/17
Table of Contents Cart Frame 150 Bushel Bin Mounting Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. dwg 38192 266-217D 817-602C 803-147C 503-158D 802-250C 167-130H 802-091C 804-017C 804-015C 803-020C 166-437H Image No. 150 BU BIN STRAP 150 BU SEED HOPPER NO LID NUT HEX NYLOCK 1/2-13 TANK STRAP ATTACHMENT PLATE RHSNB 1/2-13X2 1/4 GR5 150 BU HOPPER MNT WLMT HHCS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 USS PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT CART FRAME WELDMENT 10/11/17-19 - 166-431P
Table of Contents Dual 82 Bushel Bin Assembly 38183 166-431P - 20-10/11/17
Table of Contents Cart Frame Dual 82 Bushel Bin Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. dwg 38183 802-469C 804-025C 817-129C 167-282D 167-020H 803-147C 802-130C 807-268C 803-014C 804-012C 801-235C 167-283D 167-048H 805-169C 802-039C 167-035H 167-016H 167-123H 167-285D 802-453C 167-133H 806-077C 804-136C 803-209C 803-006C 804-006C 804-075C 802-224C 168-465H 166-421K 166-422K 803-084C 804-010C 806-192C 803-025C 167-091H 817-556C 841-229C 803-078C 802-005C 804-117C 167-298D 890-179C Image No. HHCS 3/4-10X8 GR5 PLT WASHER FLAT 3/4 SAE PLT FLNG BUSHING 1 1/8 X 1 X 3/4 LID SWIVEL INNER PIVOT TUBE LID SWIVEL WELDMENT NUT HEX NYLOCK 1/2-13 HHCS 1/2-13X2 1/2 GR5 SPRING COMP DIE.75X.375X1.50L NUT HEX 3/8-16 PLT WASHER FLAT 3/8 SAE PLT SCR HX SKT BUT CP 3/8-16X2 1/2 BIN LID TOP CROSS BAR AIR DRILL BIN LID HANDLE WLMNT PIN ROLL 1/2 X 1 3/4 HHCS 1/2-13X3 GR5 AIR DRILL BIN LID HOOK ROUND BIN LID WELDMENT STRAINER BASKET WELDMENT ADC2350 BIN LID SEAL RHSNB 3/8-16X1 1/2 GR5 LID FLANGE WELDMENT U-BOLT 3/8-16 X 2 5/8 X 3 1/4 WASHER FLAT 3/8 NEOPRENE PLT NUT FLANGE LOCK 3/8-16 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 USS PLT HHCS 1/4-20X1 1/4 GR5 METER MOUNT WELDMENT METER ASM LH METER ASM RH NUT HEX NYLOCK 5/16-18 PLT WASHER FLAT 5/16 USS PLT U-BOLT 5/16-18X1 1/2X2 1/2 RND NUT HEX 3/4-10 PLT NYLOCK BIN LADDER BULK PLANTER SEED HOPPER AD 1/8MNPT 3/16 HOSE BARB NUT LOCK 3/8-16 NYLON INSERT HHCS 1/4-20X1 GR5 WASHER FLAT 1/4 HARD ASTMF436 INSIDE BIN LADDER MNT SILICON 35YR CLEAR 10 OZ Refer to Meter Box for breakdown Refer to Meter Box for breakdown 10/11/17-21 - 166-431P
Table of Contents Dual 82 Bushel Bin Mounting 38186 166-431P - 22-10/11/17
Table of Contents Cart Frame Dual 82 Bushel Bin Mounting Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. dwg 38186 266-196D 817-556C 166-437H 166-289H 802-082C 804-017C 804-015C 803-020C 804-016C 503-158D 802-424C Image No. TANK STRAP BULK PLANTER SEED HOPPER CART FRAME WELDMENT 82/82 HOPPER MOUNT HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 USS PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER FLAT 1/2 SAE PLT TANK STRAP ATTACHMENT PLATE HHCS 1/2-13X4 FTHD 10/11/17-23 - 166-431P
Air Brakes Table of Contents 38229 166-431P - 24-10/11/17
Air Brakes Table of Contents Brakes Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. dwg 38229 891-311C 266-469D 266-470D 891-374C 815-510C 266-455D 806-263C 804-013C 803-014C 802-091C 804-015C 803-020C 802-079C 266-479D 891-370C 891-368C 891-369C 891-366C 891-367C 802-022C 891-312C Image No. BRAKE CHAMBER BRAKE PIVOT MOUNT RH PARK BRAKE TOP PLATE RELAY-EMERGENCY VALVE NTA607 BRAKE AXLE ASM TANK MOUNT U-BOLT 3/8-16 X 4 1/32 X 5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 3/8-16X1 1/4 GR5 AIR HOSE MOUNT LINE FILTER AIR COIL, YELLOW W/ HANDGRIP AIR COIL, RED W/ HANDGRIP PALM COUPLING, YELLOW PALM COUPLING, RED HHCS 3/8-16X1 1/2 GR5 AIR TANK - 20L 10/11/17-25 - 166-431P
Hydraulic Brakes Table of Contents 38228 166-431P - 26-10/11/17
Table of Contents Brakes Hydraulic Brakes Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. dwg 850-056C 266-477D 802-022C 804-013C 803-014C 831-119C 266-478D 802-005C 804-006C 803-006C 891-311C 266-469D 815-510C 266-470D 851-155C 851-149C 851-833C 841-801C 851-834C 851-831C 841-808C 851-832C 802-752C 804-226C 803-354C 166-424A Image No. EMERGENCY VALVE C/W RESET EBRAKE VALVE MOUNT PLATE HHCS 3/8-16X1 1/2 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT ACCUMULATOR 0.7L 120BAR ACCUMULATOR MOUNT BRACKET HHCS 1/4-20X1 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT BRAKE CHAMBER BRAKE PIVOT MOUNT RH NTA607 BRAKE AXLE ASM PARK BRAKE TOP PLATE QUICK RELEASE - 1/2FBSP AD 1/2MBSPP 3/8MBSPP HH3/8R2 80.0 3/8FBSP AD 3/8MBSPP 3/8MBSPP HH3/8R2 25.0 3/8FBSP HH3/8R2 200.0 3/8FBSP TEE 3/8MBSPP 3/8MBSPP 3/8MBSPP HH3/8R2 40.0 3/8FBSP HSHCS M6X1X45 GR8.8 WASHER LOCK M6 PLT NUT HEX M6-1 BRAKE AXLE ASM Refer to "Hub and Wheel with Brakes" for breakdown 10/11/17-27 - 166-431P
Parking Brakes Table of Contents 38198 166-431P - 28-10/11/17
Parking Brakes Table of Contents Brakes Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. dwg 38198 815-510C 166-441S 891-573C 803-027C 266-471D 166-440H 166-442H 266-469D 891-579C 815-498C 802-079C 804-013C 803-014C 266-453D 266-449D 266-454D 808-486C 166-428H 266-451D 802-091C 804-015C 803-020C 805-547C 805-363C 266-452D 891-578C Image No. NTA607 BRAKE AXLE ASM PARK BRAKE ADJUSTMENT ASM CLEVIS 3/4-10 W/ 5/8PIN GALV NUT HEX 3/4-10 PLT EBRAKE PUSHROD PIVOT WELDMENT BRAKE PIVOT PIN WDMT BRAKE PIVOT MOUNT RH SHACKLE 3/XX5/8X7/16X1 1/4 GAL KNOTT - HAND BRAKE ADJUSTER HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 2 HOLE SPACER BRAKE JACK MOUNT 3/4-10 X 5 ALLTHREAD PULLEY 3.5OD X 5/16WIRE ROPE BRAKE PULLEY WDMT LH PULLEY MOUNT LOWER PLATE HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT PIN CLVS.75 X 1.75 USBL PIN COTTER 1/8 X 1 PULLEY MOUNT PLATE RH WIRE ROPE 5/16X134.0W/THIMBLES 10/11/17-29 - 166-431P
Table of Contents Fan Mounting Dual 82 Bushel 38248 166-431P - 30-10/11/17
Table of Contents Fan & Air System Fan Mounting Dual 82 Bushel Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. dwg 38248 166-437H 401-203H 802-079C 804-011C 804-013C 803-014C 891-131C 810-556C 23907 23317-12 54134-00 17089 50465-00 20160 20399 7025 15095 15079-00 15039 802-375C 803-230C 15478 15097 0101-0100-00 16756 16755 800-151C 166-446H 166-421K 166-422K 168-464S 168-463H 837-108C 168-462H 837-107C 168-507D 168-461H 833-836C 805-091C 805-363C 802-143C 803-209C 802-091C 803-020C 800-023C 266-197D 890-471C 990-021R 800-126C 266-141D 804-015C 804-016C 816-808C 817-624C 166-313H Image No. CART FRAME WELDMENT YP FAN MOUNT WLDMNT 2 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 6 HYD FAN W/CASE DRAIN MOTOR PARKER F-11 FAN MTR (16303-12) HUB/MOTOR PLATE SEAL (2B) CRARY FAN MOTOR B MOUNT PLATE CASTING 6 FAN HOUSING LH SIDE 13 FAN IMPELLER CASTING 6 FAN HOUSING RH SIDE BUSHING 20MM WELDMENT SCREEN 6" FAN SCREEN CAP SCREW #14X1/2 HWH T-AB ZP BOLT, 1/4-20X3/4 HWH GR5 CZP FLAT WASHER 1/4 HFSS 1/4-20X1 GR5 NUT HEX FLANGE 1/4-20 PLT BOLT, 1/2X1 3/4 HEX HD WASHER 1/2 SAE FLAT NUT 1/2 NYLOCK PLASTIC PLUG 7/16 PLASTIC PLUG 1/4 CLAMP WRM DRV #96SS (4.75-6.5) DUAL METER AIR SPLITTER WELD METER ASM LH METER ASM RH 4 OUTLET, 4" ASM COVER PLATE WDMT UHMW SPACER, LOWER 4 OUTLET SLIDE PLATE WELDMENT 4 OUTLET SLIDE BACKING PLATE 4 OUTLET PLATE 4" TRANSITION CONE LINEAR ACTUATOR-200MM STR W/FB PIN CLVS.38X1.52 USBL PIN COTTER 1/8 X 1 HHCS 3/8-16X2 GR5 NUT FLANGE LOCK 3/8-16 PLT HHCS 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT 3 AIR HOSE BAND CLAMP GAUGE MOUNT BRACKET MAGNEHELIC PRES GAGE-0-50inH2O HOSE 1/4 RUBBER AIR CLAMP WRM DRV #5 SS (.44-.70) WALKBOARD 17.25 X 107 1/2 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT HOSE 6.0 ID DUCTING X 0.7 FT FAN INLET RAIN SHIELD FAN MOUNT ADJUSTMENT WLMT Includes 8-25 Refer to Meter Box Assembly for breakdown Refer to Meter Box Assembly for breakdown Includes 32-44, 51 & 52 10/11/17-31 - 166-431P
Table of Contents Fan Mounting Dual 82 Bushel (continued) Ref. 56. Part No. 990-273R Part Description PVC SEED HOSE 4 ID Comments Revision 166-431P - 32-10/11/17
Table of Contents Fan & Air System Fan Mounting Dual 82 Bushel (continued) This Page Intentionally Left Blank 10/11/17-33 - 166-431P
Table of Contents 150 Bushel Bin Meter Mounting 38247 166-431P - 34-10/11/17
Table of Contents Fan & Air System 150 Bushel Bin Meter Mounting Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. dwg 38247 817-602C 168-465H 802-224C 804-075C 804-006C 803-006C 802-159C 803-177C 802-155C 804-013C 803-014C 168-535D 168-533D 168-534D 804-011C Image No. 150 BU SEED HOPPER NO LID METER MOUNT WELDMENT HHCS 1/4-20X1 1/4 GR5 WASHER FLAT 1/4 USS PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 5/16-18X1 GR5 NUT HEX FLG TP LK 5/16-18ZNYCR RHSNB 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT DUMP CHUTE CHUTE MOUNT F CHUTE MOUNT R WASHER FLAT 3/8 USS PLT 10/11/17-35 - 166-431P
Table of Contents Fan Mounting 150 Bushel 38251 166-431P - 36-10/11/17
Table of Contents Fan & Air System Fan Mounting 150 Bushel Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. dwg 38251 166-437H 401-203H 802-079C 804-011C 804-013C 803-014C 891-131C 810-556C 23907 23317-12 54134-00 17089 50465-00 20160 20399 7025 802-375C 803-230C 15478 0101-0100-00 15095 15097 15079-00 15039 16756 16755 800-151C 166-448H 166-421K 166-313H 166-449S 168-489H 837-111C 166-450H 837-114C 266-499D 168-461H 833-836C 805-091C 805-363C 802-143C 803-209C 802-091C 803-020C 800-023C 266-197D 890-471C 990-021R 800-126C 817-624C 804-015C 804-016C 816-808C 266-490D 802-149C 803-209C Image No. CART FRAME WELDMENT YP FAN MOUNT WLDMNT HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 6 HYD FAN W/CASE DRAIN MOTOR PARKER F-11 FAN MTR (16303-12) HUB/MOTOR PLATE SEAL (2B) CRARY FAN MOTOR B MOUNT PLATE CASTING 6 FAN HOUSING LH SIDE 13 FAN IMPELLER CASTING 6 FAN HOUSING RH SIDE BUSHING 20MM WELDMENT SCREEN 6" FAN SCREEN CAP HFSS 1/4-20X1 GR5 NUT HEX FLANGE 1/4-20 PLT BOLT, 1/2X1 3/4 HEX HD NUT 1/2 NYLOCK SCREW #14X1/2 HWH T-AB ZP WASHER 1/2 SAE FLAT BOLT, 1/4-20X3/4 HWH GR5 CZP FLAT WASHER 1/4 PLASTIC PLUG 7/16 PLASTIC PLUG 1/4 CLAMP WRM DRV #96SS (4.75-6.5) SINGLE BIN AIR SPLITTER METER ASM LH FAN MOUNT ADJUSTMENT WLMT DIVERTER ASM 2 OUTLET COVER WELDMENT 2 OUTLET UHMW SLIDE SPACER SLIDE PLATE WELDMENT TRANSITION MOUNT PLATE TRANSITION PLATE 4" TRANSITION CONE LINEAR ACTUATOR-200MM STR W/FB PIN CLVS.38X1.52 USBL PIN COTTER 1/8 X 1 HHCS 3/8-16X2 GR5 NUT FLANGE LOCK 3/8-16 PLT HHCS 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT 3 AIR HOSE BAND CLAMP GAUGE MOUNT BRACKET MAGNEHELIC PRES GAGE-0-50inH2O HOSE 1/4 RUBBER AIR CLAMP WRM DRV #5 SS (.44-.70) FAN INLET RAIN SHIELD WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT HOSE 6.0 ID DUCTING X 0.7 FT AIR MANIFOLD SUPPORT BRKT RHSNB 3/8-16X3/4 GR5 NUT FLANGE LOCK 3/8-16 PLT Includes 8-26 15079-00 Refer to Meter Box Assembly for breakdown Includes 32-44, 51 & 52 10/11/17-37 - 166-431P
Table of Contents Fan Mounting 150 Bushel (continued) Ref. 57. Part No. 270-458D Part Description BRKT FAN SENSOR MOUNT MUELLER Comments Revision 166-431P - 38-10/11/17
Table of Contents Fan & Air System Fan Mounting 150 Bushel (continued) This Page Intentionally Left Blank 10/11/17-39 - 166-431P
Table of Contents Meter Box Assembly 38199 166-431P - 40-10/11/17
Table of Contents Fan & Air System Meter Box Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. dwg 38199 168-535D 168-533D 168-534D 802-155C 119-278D 804-011C 804-013C 803-014C 805-154C 168-529D 805-363C 266-172D 802-284C 803-013C 168-474H 805-044C 168-470H 802-551C 804-007C 166-306H 816-661C 837-032C 837-105C 417-312D 168-546D 805-442C 802-079C 164-129D 805-158C 808-192C 891-575C 168-469S 891-461C 891-460C 168-466H 858-933C 168-243D 890-466C 802-001C 804-033C 168-251D 188-009V 816-199C 168-471H 168-465H 802-224C 804-075C 804-006C 803-006C 817-042C 803-293C 802-159C 803-177C 168-538D 168-475H 168-473H 168-537D Image No. DUMP CHUTE CHUTE MOUNT F CHUTE MOUNT R RHSNB 3/8-16X1 1/4 GR5 WALKBOARD LADDER PIVOT BUSHING WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT PIN CLVS.38X2.13 USBL TUBE SPACER PIN COTTER 1/8 X 1 DUMP SHOOT LATCH HHCS 3/8-16X1/2 GR5 NUT LOCK 3/8-16 PLT HANDLE WLMT PIN ROLL 1/4 X 1 PLATED METER COVER PIVOT WDMT R HHCS 1/4-20X2 1/4 GR5 WASHER FLAT 1/4 SAE PLT 4-OUTLET METER CAL LID WLDMENT 4-OUTLET METER CAL LID SEAL 3"-4 INLET METER TRANSITION 3" 4 OUTLET METER TRANSITION METER BOX PARTITION COVER LATCH PIN LYNCH 3/16 W/COTTER/CHAIN HHCS 3/8-16X1 1/4 GR5 GEAR COVER PIN LINCH 5/16 X 2 11/32 GEAR 17 TOOTH QUICK CHANGE RETAINING WIRE QC SHAFT ASM METER BRUSH #7 HOLDER 9C7190 METER BRUSH 8B9054 METER HOUSING WELDMENT DECAL METER GEAR RANGE REVERSE GEAR 54 TOOTH QUICK CHANGE HSG RIBB FLG 6BOLT PLT HHCS 1/4-20X3/4 SS WASHER LOCK 1/4 SS METERING BOX SEAL FLANGE BRG.755 HEX BORE W/S-S METERING BOX BEARING SEAL AGITATOR SHAFT WDMT METER MOUNT WELDMENT HHCS 1/4-20X1 1/4 GR5 WASHER FLAT 1/4 USS PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT MINI END WHEEL PRESS WHEEL NUT HEX FLG TL 1/4-20 ZNYCR HHCS 5/16-18X1 GR5 NUT HEX FLG TP LK 5/16-18ZNYCR SHAFT DOOR ADJUSTMENT PIVOT ARM LEVER WDMT LOCKING HANDLE TUBE 10/11/17-41 - 166-431P
Table of Contents Meter Box Assembly (continued) Ref. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. Part No. 805-016C 805-091C 805-067C 168-539D 168-540D 802-034C 168-541D 804-016C 803-342C 802-412C 803-020C 168-614D 802-014C Part Description PIN COTTER 3/16 X 1 1/4 PLT PIN CLVS.38X1.52 USBL PIN COTTER 1/8 X 3/4 CLEANOUT DOOR MOUNT PLATE CLEANOUT DOOR CHANNEL HHCS 1/2-13X1 1/4 GR5 5/8 SPACER TUBE WASHER FLAT 1/2 SAE PLT NUT HEX TOP LOCK 1/2-13 PLT HHCS 1/2-13X2 3/4 FTHD NUT HEX 1/2-13 PLT LEVER STOP HHCS 3/8-16X3/4 GR5 Comments Revision 166-431P - 42-10/11/17
Table of Contents Fan & Air System Meter Box Assembly (continued) This Page Intentionally Left Blank 10/11/17-43 - 166-431P
Table of Contents Meter Shaft Assembly 38273 166-431P - 44-10/11/17
Table of Contents Fan & Air System Meter Shaft Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. dwg 38273 800-318C 168-528D 817-433C 817-018C 817-426C 817-432C 816-199C 188-009V 168-527D 801-045C 168-510S 817-751C 817-206C 817-752C 168-511S 817-903C 168-512S Image No. SNAP RING EXT.812X.042 5100-81 607 METER SHAFT METERING BOX END SPACER 1.75 AGITATOR 8 POINT HALF METERING BOX SPACER-1 IN METERING BOX END SPACER 2.007 METERING BOX BEARING SEAL BRG.755 HEX BORE W/S-S QC BEARING MOUNT SCREW SET 1/4-28X1/4 KNL CUP QC 4 OUTLET 3 STAR ASM METERING BOX END SPACER 2.250 METERING BOX MIDDLE SPACER METERING BOX END SPACER 2.507 QC 4 OUTLET 2 STAR ASM SMALL SEEDS METER STAR QC 4 OUTLET SM SD ASM Includes items 1-10 Includes items 1, 2, 4, 7-10, 12-14 Includes items 1, 2, 7-10, 12-14, 16 10/11/17-45 - 166-431P
Table of Contents Cart Hydraulics with Dual Hoppers 38267 166-431P - 46-10/11/17
Table of Contents Cart Hydraulics Cart Hydraulics with Dual Hoppers Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. dwg 38267 811-055C 811-059C 811-512C 811-797C 851-850C 841-184C 891-131C 851-744C 851-745C 851-746C 851-747C 810-556C 841-002C 811-080C 811-150C 811-416C 811-324C 811-077C 811-073C 810-037C 891-577C 168-550D 802-014C 804-013C 811-170C 811-169C 811-312C 800-052C 802-370C 804-007C 804-006C 803-006C 266-457D 850-120C 811-065C 811-064C 841-476C 841-992C 802-017C 804-013C 803-014C 841-093C Image No. HH1/2R2 292 3/4FJIC 3/4MORB HH1/2R2 080 3/4FJIC HH1/2R2 219 3/4FJIC 3/4MORB HH3/8R1 080 9/16FJIC HH1/2R2 288 3/4FJIC 3/4MORB HH3/8R2 024 9/16FJIC 6 HYD FAN W/CASE DRAIN MOTOR HH3/8R2 028 3/4FJIC 3/4MORB HH1/2R2 240 3/4FJIC 3/4MORB HH1/4R2 240 9/16FJIC HH1/2R1 020 3/4FJIC 3/4MORB PARKER F-11 FAN MTR (16303-12) AD 1 1/16MORB 3/4FORB TE 3/4MJIC 3/4MORB 3/4MJIC EL 3/4FJIC 3/4MJIC EL 45 9/16MJIC 9/16MORB AD 3/4MORB 3/4FJIC TE 3/4MORB 3/4MJIC 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC VALVE LINE CHECK CHAR-LYNN MOTOR MOTOR MOUNT BRACKET HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT AD 9/16MORB 9/16MJIC EL 9/16MJIC 9/16FJIC TE 9/16MJIC HOSE CLIP 5/8 I.D. HHCS 1/4-20X1 3/4 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT PWM VALVE MOUNT VLV FLOW CONTROL 12VDC PDM EL 9/16MJIC 9/16MORB TE 9/16MJIC 9/16MJIC 9/16MORB AD 9/16FJIC 9/16MJIC AD 9/16FJIC 9/16FJIC UNION HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HH1/4R1 280 9/16FJIC 9/16MORB 10/11/17-47 - 166-431P
Table of Contents Cart Hydraulics with One Hopper 38276 166-431P - 48-10/11/17
Table of Contents Cart Hydraulics Cart Hydraulics with One Hopper Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. dwg 38276 811-055C 811-059C 811-512C 811-797C 841-386C 841-148C 891-131C 851-744C 851-745C 851-746C 851-747C 810-556C 841-002C 811-080C 811-150C 811-416C 811-324C 811-077C 811-073C 810-037C 891-577C 168-550D 802-014C 804-013C 811-170C 802-370C 804-007C 804-006C 803-006C 850-120C 811-065C 841-093C 851-850C Image No. HH1/2R2 292 3/4FJIC 3/4MORB HH1/2R2 080 3/4FJIC HH1/2R2 219 3/4FJIC 3/4MORB HH3/8R1 080 9/16FJIC HH3/8R2 037 9/16FJIC AD 3/4MJIC 3/4MORB FLARE-O 6 HYD FAN W/CASE DRAIN MOTOR HH3/8R2 028 3/4FJIC 3/4MORB HH1/2R2 240 3/4FJIC 3/4MORB HH1/4R2 240 9/16FJIC HH1/2R1 020 3/4FJIC 3/4MORB PARKER F-11 FAN MTR (16303-12) AD 1 1/16MORB 3/4FORB TE 3/4MJIC 3/4MORB 3/4MJIC EL 3/4FJIC 3/4MJIC EL 45 9/16MJIC 9/16MORB AD 3/4MORB 3/4FJIC TE 3/4MORB 3/4MJIC 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC VALVE LINE CHECK CHAR-LYNN MOTOR MOTOR MOUNT BRACKET HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT AD 9/16MORB 9/16MJIC HHCS 1/4-20X1 3/4 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT VLV FLOW CONTROL 12VDC PDM EL 9/16MJIC 9/16MORB HH1/4R1 280 9/16FJIC 9/16MORB HH1/2R2 288 3/4FJIC 3/4MORB 10/11/17-49 - 166-431P
Implement Hitch Table of Contents 38193 166-431P - 50-10/11/17
Implement Hitch Table of Contents Implement Frame Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. dwg 38193 160-441H 160-452H 160-322H 805-255C 827-167C 890-005C 805-306C 502-068D 800-052C 802-007C 804-009C 160-754D 805-187C 805-104C 810-412C 810-442C 800-064C 163-038D 805-499C 160-985D 802-116C 160-734D 160-733D 807-084C 196-149D 810-201C 160-332S 160-321H 160-370H 802-281C 804-022C 803-021C 804-071C 805-255C 810-219C 805-134C Image No. FRONT PULL LINK WELDMENT NTA607HD CENTER FRAME WELDMENT PIN WLDMNT 1.25 X 16.09 NR PIN ROLL 3/8 X 2 1/2 PLT BUSH SL TEF 1.25IDX1.50ODX1.5 BUSHING CYL 1 1/4 X 1 X 1 PIN HTCH 1.0X3.25 USBL W/PIN HYD HOSE CLAMP BRACKET HOSE CLIP 5/8 I.D. HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT NTA607 PULL LINK CYLINDER LUG PIN CLVS 1.0X2.27 USBL GR5 PIN COTTER 3/16 X 1 1/2 PLT HYD CYL REP 3.5X10X1.25 TIEROD MW STOP BUSH SET 1 1/4 SBS125 HOSE CLIP 13/16 ID PIN 2 X 5.06 PIN ROLL 1/2 X 3 SPIRAL BUSHING SLEEVE 3.25X1.63X.50W HHCS 5/8-11X6 GR5 TRANSPORT LOCK SPRING TUBE TRANSPORT LOCK BLOCK SPRING COMP 15/16 OD X.098 W ADAPTOR NUT 3/4-16 X 5/8-11 CYL 1.5X2.5X.75 ROD (TIE ROD) NTA607HD TRANSPORT LOCK ASY BACK PRESSURE FLEX LINK WELDMT ANTIROTATION PIN 1.50 X 7.78 HHCS 5/8-11X2 3/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT WASHER FLAT 1 1/2 SAE PLT PIN ROLL 3/8 X 2 1/2 PLT CYL 3.5X16X2 ROD (TIE ROD) PIN CLVS 1.0X2.45 USBL Includes 21-26 10/11/17-51 - 166-431P
Table of Contents Implement Lift Assist to Frame 38194 166-431P - 52-10/11/17
Table of Contents Implement Frame Implement Lift Assist to Frame Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. dwg 38194 160-452H 805-501C 805-449C 163-038D 160-447H 803-406C 827-169C 160-368H Image No. NTA607HD CENTER FRAME WELDMENT DOWEL PIN 1/2 X 3 ALLOY STEEL PIN?45X160 TYPE P PIN 2 X 5.06 LIFT LINK TUBE WELDMENT NUT HEX JAM 2-12 UNF PLT BUSH SL TEF 2.00IDX2.25ODX1.63 LIFT LINK ADJUSTER WELDMENT 10/11/17-53 - 166-431P
Table of Contents Rear Implement Lift Assist 38237 166-431P - 54-10/11/17
Table of Contents Implement Frame Rear Implement Lift Assist Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. dwg 38237 160-452H 160-442H 160-446H 160-445H 160-201H 805-255C 163-033D 802-007C 804-009C 804-010C 804-039C 827-167C 160-732D 163-034D 163-039D 160-461H 802-282C 804-009C 803-008C 802-017C 804-013C 803-014C Image No. NTA607HD CENTER FRAME WELDMENT REAR PULL LINK WELDMENT REAR PIVOT UPPER LINK WELDMENT REAR AXLE WELDMENT WING PIVOT PIN WELDMENT PIN ROLL 3/8 X 2 1/2 PLT LIFT SWITCH MOUNT HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER FLAT 1 1/4 SAE PLT BUSH SL TEF 1.25IDX1.50ODX1.5 PIVOT PIN 1.25 X 14.06 REAR DECAL PLATE SIGN BRACE CALIB BAG MOUNT WLMT RHSNB 5/16-18X1 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 10/11/17-55 - 166-431P
Table of Contents Implement Weight Bracket Mounting 38231 166-431P - 56-10/11/17
Table of Contents Implement Frame Implement Weight Bracket Mounting Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. dwg 38231 160-444S 160-628D 160-443H 160-630D 802-712C 804-028C 803-316C 802-060C 804-022C 803-021C Image No. WEIGHT ASSEMBLY NTA WEIGHT BRKT. BAR-LONG WEIGHT MOUNT WDMT NTA WEIGHT BRKT MOUNT HHCS 1-8X14 1/2 GR5 SPTHD WASHER FLAT 1 USS PLT NUT HEX LOCK 1-8 PLT HHCS 5/8-11X4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLTM Includes 2-7 10/11/17-57 - 166-431P
Table of Contents Implement Wing to Frame 38242 166-431P - 58-10/11/17
Table of Contents Implement Frame Implement Wing to Frame Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. dwg 38242 160-359H 160-458H 160-452H 160-201H 805-255C 827-167C 802-075C 803-168C 802-299C 160-854D 804-023C 803-027C 160-325H 802-053C 804-022C 803-021C 810-638C 890-005C 160-755D 842-172C 113-944H 806-044C Image No. 10 DEG WING PIVOT EXT WLDMT CE LEFT WING WELDMENT NTA607HD CENTER FRAME WELDMENT WING PIVOT PIN WELDMENT PIN ROLL 3/8 X 2 1/2 PLT BUSH SL TEF 1.25IDX1.50ODX1.5 HHCS 1-8X7 GR5 NUT HEX TOP LOCK 1-8 PLT RHSNB 3/4-10X3 GR5 SPACER TUBE 1.25 X.81 X 1 LG WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT NTA607 FOLD CYL LUG 10 DNFLEX HHCS 5/8-11X1 3/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CYL 4X30X2 TIE 40.63 CL 3000# BUSHING CYL 1 1/4 X 1 X 1 NTA607 WING FRAME FOLD CYL LUG HHCS 3/4-10X4 GR8 OUTSIDE CHAIN MOUNT WLMT U-BOLT 5/8-11 X 5 1/32 X 6 GR5 Used with "no marker" option only. Used with "no marker" option only. Used with "no marker" option only. Used with "no marker" option only. 10/11/17-59 - 166-431P
Table of Contents Gauge Wheel Assembly 38174 166-431P - 60-10/11/17
Table of Contents Implement Frame Gauge Wheel Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. dwg 38174 810-171C 810-442C 161-107H 804-030C 803-032C 160-458H 160-440H 890-005C 827-167C 805-001C 160-369H 805-255C 802-058C 804-022C 803-021C 407-281H 161-030S 814-473C 814-475C 814-474C80 802-065C 804-023C 803-210C 822-141C 822-231C 161-029H 842-008C 803-403C 800-001C 161-027H 814-226C 814-503C 816-035C 814-502C 402-662D 816-529C 815-228C 822-240C 402-607D 402-663D 803-383C 402-410S Image No. CYL REP 3.25X10X1.25 ROD (TIE) MW STOP BUSH SET 1 1/4 SBS125 NTA35 WING EYEBOLT WELDMENT WASHER LOCK 1 1/4 SPRING PLT NUT HEX JAM 1 1/4-7 PLT LEFT WING WELDMENT 607 GW ARM WDMT GRSLSS BUSHING CYL 1 1/4 X 1 X 1 BUSH SL TEF 1.25IDX1.50ODX1.5 PIN BENT.38X3.0 USBL W/PIN ANTIROTATION PIN 1.25 X 17.34 PIN ROLL 3/8 X 2 1/2 PLT HHCS 5/8-11X2 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CYLINDER LOCK CHANNEL 1 1/2 X 205MM X 12.6" HUB ASM TYRE 10.0/75-15 14 PLY RIM 6 STUD 205MM PCD WHEEL ASSY 10.0/75-15-14 PLY HHCS 3/4-10X2 1/4 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX JAM 1 1/2-12 PLT BRG CONE 1.50ID 13600LA90028 BRG CUP 13621 205MM X 6 STUD WDMT HUB STUD M18X1.5X54 GR12.9 NUT LUG M18X1.5 X 24MM FLATS GREASE ZERK STRAIGHT 1/4-28 AXLE SHAFT WDMT TIRE 11LX15 LOAD F WHEEL 15X8 8 BOLT BUCKSKIN VALVE STEM TR415X.625X1 1/4 LG TIRE/WHL 11LX15LOAD F 8BLT BKS DRIVE SPINDLE YP 4-6-8 11L15 HUB SEAL Q458 (TCM 223063TB-H) HUB 8-BOLT(45-8) ASY BRG, DUO-FACE W/SEAL LM67000LA SEAL KEEPER WASHER DRIVE SPINDLE SPACER NUT HEX JAM 1 1/4-12 PLT HUB & SPINDLE ASSEMBLY Includes items 21-30 Used on "With Brake" option Includes 18 and 19. Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "No Brake" option Used on "No Brake" option Used on "No Brake" option Includes 31-33. Used on "No Brake" option Used on "No Brake" option. Used on "No Brake" option. Used on "No Brake" option. Used on "No Brake" option. Used on "No Brake" option. Used on "No Brake" option. Used on "No Brake" option. Includes 35-41. Used on "No Brake" option. 10/11/17-61 - 166-431P
Table of Contents Gauge Wheel Scaper 38326 166-431P - 62-10/11/17
Table of Contents Implement Frame Gauge Wheel Scaper Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. dwg 38326 163-057D 163-059D 163-058D 802-091C 802-106C 803-020C 804-015C 804-016C Image No. SCRAPER MOUNT SCRAPER MOUNT L SCRAPER BLADE HHCS 1/2-13X1 1/2 GR5 RHSNB 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT 10/11/17-63 - 166-431P
Table of Contents Rear Transport Wheels 38244 166-431P - 64-10/11/17
Table of Contents Implement Frame Rear Transport Wheels Ref. Part No. Part Description Comments Revision 1. 1. 2. 2. 3. 4. 4. 5. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. dwg 38244 814-473C 814-226C 814-475C 814-503C 816-035C 814-474C80 814-502C 161-030S 402-410S 161-051H 160-445H 802-469C 804-023C 803-027C 805-062C 807-175C 151-355D 802-034C 804-015C 161-231D 827-171C 196-979D 827-172C 802-067C 803-048C 266-012D 807-290C 266-020D Image No. TYRE 10.0/75-15 14 PLY TIRE 11LX15 LOAD F RIM 6 STUD 205MM PCD WHEEL 15X8 8 BOLT BUCKSKIN VALVE STEM TR415X.625X1 1/4 LG WHEEL ASSY 10.0/75-15-14PLY TIRE/WHL 11LX15LOAD F 8BLT BKS 205MM X 12.6" HUB ASM HUB & SPINDLE ASSEMBLY REAR CASTER WDMT REAR AXLE WELDMENT HHCS 3/4-10X8 GR5 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT PIN ROLL 3/16 X 2 1/2 LG. PTL. SPRING COMP.796ODX.065WX1.22 1007 LOCK OUT PLUNGER HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP BUSH SL TEF 3.00IDX3.50ODX4 3N40 HD BLK SED CSTR VER SHAFT THRUST BRG TEF 3ID HHCS 3/4-10X4 GR5 FTHD NUT HEX JAM 3/4-10 PLT PLATE RND 3/16" THK 1 7/8" DIA SPRING DIE 2 OD X 5 LONG 1040# UHMW RND 2.0 DIA X 2.0 LONG Used on machines with brakes. Used on machines without brakes. Used on machines with brakes. Used on machines without brakes. Used on machines without brakes. Includes 1 and 2 Includes 1-3. Used on machines without brakes. Used on machines with brakes. See Gauge Wheel Assembly for breakdown. Used on machines without brakes. See Gauge Wheel Assembly for breakdown. Used on machines with brakes. 10/11/17-65 - 166-431P
Table of Contents Center and Right Wing 38272 166-431P - 66-10/11/17
Table of Contents Implement Hydraulics Center and Right Wing Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. dwg 38272 810-219C 811-171C 811-061C 811-702C 841-687C 810-342C 811-169C 811-470C 811-397C 851-689C 851-742C 841-993C 811-423C 841-031C 841-515C 811-897C 851-050C 811-217C 811-782C 841-541C 811-832C 851-830C 810-412C 811-063C 811-053C 811-269C 811-150C 841-521C 841-380C 851-391C 841-623C 810-171C 810-638C 811-999C 810-757C 811-065C 851-825C 841-779C 841-181C 850-149C 802-152C 804-007C 804-006C 803-006C 811-762C 810-201C 841-184C 850-148C 163-111D 811-061C 851-825C Image No. CYL 3.5X16X2 ROD (TIE ROD) EL 3/4MORB 9/16MJIC TE 9/16MJIC 9/16MJIC 9/16FJIC HH3/8R2 017 9/16FJIC HH3/8R2 013 9/16FJIC NC POPPET SOLENOID VALVE EL 9/16MJIC 9/16FJIC TE 9/16MJIC 3/4MORB 9/16MJIC EL 45 9/16MJIC 9/16FJIC HH3/8R2 030 9/16FJIC HH3/8R2 052 9/16FJIC EL 3/4MJIC BLKHD EL 9/16MJIC BLKHD HH1/2R1 112 3/4FJIC HH1/2R2 116 3/4FJIC HH3/8R2 123 3/4FJIC HH3/8R2 125 9/16FJIC HH3/8R1 114 9/16FJIC HH1/2R1 024 3/4FJIC 3/4MORB HG HANDLE - GRAY RET HH1/2R1 068 3/4FJIC HH3/8R2 055 9/16FJIC HYD CYL REP 3.5X10X1.25 TIEROD EL 3/4MJIC 3/4MORB HH1/2R2 052 3/4FJIC HH1/2R2 036 3/4FJIC EL 3/4FJIC 3/4MJIC TE 3/4MJIC BULKHEAD AD BKHD 3/4MJIC HH1/2R2 125 3/4FJIC HH1/2R2 110 3/4FJIC CYL REP 3.25X10X1.25 ROD (TIE) CYL 4X30X2 TIE 40.63 CL 3000# EL 9/16MORB 3/4MORB COUNTERBALANCE VALVE 10:1 SUN EL 9/16MJIC 9/16MORB HH3/8R2 042 9/16FJIC HH3/8R2 046 9/16FJIC HH3/8R2 018 9/16FJIC PRESSURE REDUCING VALVE HHCS 1/4-20X2 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HH3/8R2 020 9/16FJIC CYL 1.5X2.5X.75 ROD (TIE ROD) HH3/8R2 024 9/16FJIC FLOW CONTROL VALVE VALVE SUPPORT BRKT TE 9/16MJIC 9/16MJIC 9/16FJIC HH3/8R2 042 9/16FJIC Refer to Hydraulic Cylinder (810-219C) for breakdown. Refer to Hydraulic Cylinder (810-412C) for breakdown. Refer to Hydraulic Cylinder (810-171C) for breakdown. Refer to Hydraulic Cylinder (810-638C) for breakdown. Refer to Pressure Reducing Valve (850-149C) for breakdown. Refer to Hydraulic Cylinder (810-201C) for breakdown. 10/11/17-67 - 166-431P
Table of Contents Center and Right Wing (continued) Ref. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. Part No. 841-204C 811-133C 811-193C 811-439C 811-581C 810-428C 163-032D 811-627C 850-147C 811-690C 802-893C 990-223R 990-228R 851-300c Part Description AD 9/16FJIC 3/4MORB AD 9/16MJIC 3/4MORB TE 9/16FJIC 9/16MJIC 9/16MJIC TE 9/16MORB 9/16MJIC 9/16MJIC CR 9/16MJIC VALVE PO CHECK 4:1 W/9/16FORB VALVE MOUNT PLATE AD 9/16MORB 9/16FJIC 6 PORT SOLENOID VALVE EL 45 3/4MORB 3/4MJIC HHCS 1/4-20X6 GR5 PLT SPIRAL HOSE WRAP 2.00 DIA SPIRAL HOSE WRAP 1 ID PLASTIC AD 3/4MJIC 9/16FJIC Comments Refer to Check Valve (810-428C) for breakdown. Revision 166-431P - 68-10/11/17
Table of Contents Implement Hydraulics Center and Right Wing (continued) This Page Intentionally Left Blank 10/11/17-69 - 166-431P
Table of Contents Left Wing Hydraulics 38293 166-431P - 70-10/11/17
Table of Contents Implement Hydraulics Left Wing Hydraulics Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. dwg 38293 810-171C 851-632C 841-839C 811-063C 811-040C 841-377C 811-397C 841-380C 811-253C 851-630C 851-541C 811-703C 811-065C 810-348C 811-439C 811-627C 811-170C 810-349C 811-216C 841-077C 810-554C 811-150C 811-582C 810-347C 802-551C 804-006C 803-006C 811-263C 811-073C 811-702C 811-331C 811-690C 810-432C 811-133C 802-216C 804-013C 803-014C 163-055D 806-166C 804-007C Image No. CYL REP 3.25X10X1.25 ROD (TIE) HH1/2R2 117 3/4FJIC HH1/2R2 132 3/4FJIC EL 3/4MJIC 3/4MORB EL 45 3/4MJIC 3/4FJIC AD BKHD 9/16MJIC EL 45 9/16MJIC 9/16FJIC AD BKHD 3/4MJIC HH3/8R2 062 9/16FJIC HH1/2R2 064 3/4FJIC HH3/8R2 053 9/16FJIC HH3/8R2 068 9/16FJIC EL 9/16MJIC 9/16MORB RELIEF VALVE 1350 PSI TAMP PRF TE 9/16MORB 9/16MJIC 9/16MJIC AD 9/16MORB 9/16FJIC AD 9/16MORB 9/16MJIC VALVE PRESS RED W/ CHK 1/16 OR EL 3/4MJIC 9/16MORB EL 3/4FJIC 3/4MORB FILTER INLINE 3/4FORB 3/4MJIC EL 3/4FJIC 3/4MJIC AD 9/16FJIC 1/4FNPT PRESSURE GAUGE 2000 PSI HHCS 1/4-20X2 1/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HH1/2R2 300 1/2MNPT 3/4FJIC TE 3/4MJIC 3/4MJIC 3/4FJIC HH3/8R2 017 9/16FJIC HH1/2R2 020 3/4FJIC EL 45 3/4MORB 3/4MJIC HYDRAULIC BYPASS VALVE AD 9/16MJIC 3/4MORB HHCS 3/8-16X2 3/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT VALVE MOUNT BRACKET U-BOLT 3/8-16 X 2 1/32 X 3 WASHER FLAT 1/4 SAE PLT Refer to Hydraulic Cylinder m810-171c for breakdown. Refer to Relief Valve (810348C) for breakdown. Refer to Pressure Reducing Valve (810-349C) for breakdown. 10/11/17-71 - 166-431P
Table of Contents Hydraulic Cylinder (810-171P) 31624 166-431P - 72-10/11/17
Table of Contents Implement Hydraulics Hydraulic Cylinder (810-171P) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. dwg31624 1M6010-ADI 2M5418 3R2412 4R2109 5R2118 6R2164-ADI 7M5318 2A0024 2A0016 803-234C 802-023C 810-173C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 1/4 DIA X 10' STROKE MW HEAD PISTON MIDWAY TUBE MIDWAY MIDWAY ADI BASE TIE ROD MIDWAY WIPER SEAL O-RING BACK-UP O-RING BACK-UP TEFLON SEAL LOADER O-RING WEAR RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 3.25 RPHCYL 4A2104 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 10/11/17-73 - 166-431P
Table of Contents Hydraulic Cylinder (810-201C) 12822 166-431P - 74-10/11/17
Table of Contents Implement Hydraulics Hydraulic Cylinder (810-201C) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. dwg12822 2M1190 2A0014 3M1108 804-021C 2A0130 2A0202 6M1108 7M1302 5M1103 2A0018 4M1102 810-249C Image No. MW ROD WIPER SEAL BACKUP O-RING MW TIE ROD NUT MW HEAD WASHER FLAT 5/8 SAE PLT MW COTTER PIN MW CLEVIS PIN MW BASE O-RING MW TIE ROD MW TUBE MW TIE ROD NUT MW PISTON BACKUP SEAL KIT MW 3A1102 Only available in item 17 Only available in item 17 Only available in item 17 Only available in item 17 Only available in item 17 10/11/17-75 - 166-431P
Table of Contents Hydraulic Cylinder (810-219C) 16401 166-431P - 76-10/11/17
Table of Contents Implement Hydraulics Hydraulic Cylinder (810-219C) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. dwg 16401 1M7016 2M5690 3R3612 4M5108 5M5124 6R3162 7M5324 2A0206 2A0208 2A0024 2A0016 2A0012 802-023C 2A0132 810-251C Image No. CLEVIS ROD MIDWAY MW ROD MW HEAD MW PISTON MW TUBE 3-1/2 X 16 CYLINDER BASE MIDWAY MW TIE ROD MW PIN SHORT MW CLEVIS PIN WIPER SEAL O-RING BACKUP O-RING BACKUP MW PISTON NUT 1-14 MW TIE ROD NUT MW NUT HHCS 3/8-16X1 3/4 GR5 MW PIN CLIP SEAL KIT MW 5A5106 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 10/11/17-77 - 166-431P