Air Tools INDUSTRIAL & AUTOMOTIVE RANGE

Air Tools INDUSTRIAL & AUTOMOTIVE RANGE Impact Wrenches Impulse Wrenches Ratchet Wrenches Impact Sockets Screwdrivers Angle Grinders Die Grinders Sanders Needle Scalers Drills Haers Chisels Saws Riveters Various Tools www.yokota.co.uk

5 13 19 21 23 29 33 37 41 45 49 53 55 57 59 62 64 65 66 67 Contents Impact Wrenches Impulse Wrenches Ratchet Wrenches Impact Sockets Screwdrivers Angle Grinders Die Grinders Sanders Needle Scalers Drills Haers Chisels Saws Riveters Various Tools EAV & ELV Chart Repair & Service Warranty Maintenance & Use Terms & Conditions Yokota UK is the UK s leading supplier of Industrial & Automotive Pneumatic tools. With our Industrial & Automotive range we bring you an extended selection of our highest quality air tools & accessories. These are hand selected from our extensive portfolio of tools from Toku, Red Rooster Industrial, Red Rooster Automotive, Trelawny & Action. The selection offers unrivalled quality and market leading tool life, supported by comprehensive service and support packages. The tools featured have a proven track record working in some of the most demanding environments today including: Automotive aftermarket Automotive & assembly sectors Foundry / fabrication plants Civil engineering & quarrying Offshore industry Now in its 3rd decade of trading, Yokota UK guarantee quality, service and industry renowned product knowledge with a market leading repair service. With over 100 years of combined industry experience in all sectors of the pneumatic tools market, Yokota personnel will add value to its customers - from construction applications through to industrial manufacturing. GB13307A GB19427A GB21148A

Brands The Red Rooster range is produced specifically for Yokota UK by our leading air tool manufacturing partners, a comprehensive range of high quality tools suitable for any environment. These tools have been hand selected, quality checked and tested by our product development team to ensure the highest quality level and reliability standards are achieved. Red Rooster Automotive The Red Rooster Automotive range is designed specifically for automotive aftermarket, workshop & light industrial applications. This range includes Impact & ratchet wrenches, screwdrivers, angle & die grinders, drills, cutting tools & chipping haers. Red Rooster Industrial The Red Rooster Industrial range is designed specifically for lighter industrial applications, light industry, vehicle assembly, white goods & the electrical assembly sectors. This range includes impact wrenches, impulse wrenches, high accuracy screwdrivers, angle grinders & heavy duty haers. A world leading manufacturer of industrial pneumatic tools The Toku moving circle symbol signifies - quality, reliability and continuity - the three key factors in the Toku philosophy. Manufactured using only the highest quality raw materials and most advanced assembly techniques, Toku offers a superior prograe of industrial tools suitable for even the most demanding environments. Surface Preparation Tools Yokota UK are Trelawny s key UK distribution partner, working together with the UK s highest quality manufacturer of surface preparation tools & machines we are able to expand our market leading range. Bringing you a comprehensive range of pneumatic, electric & petrol machines for all surfacing applications. Impact sockets for professionals! Available from ¼" to 2½" drive. Impact sockets from our Action range are manufactured in accordance with DIN3121 and DIN3129 and comply fully with the European regulation - Directive of Machinery 2006/42/EG and ISO11148-6. This states that only impact sockets are to be used on power tools. Order Line: 01909 552471 www.yokota.co.uk 3

Special Features Throughout this catalogue, you will notice a number of products marked with special feature icons. Our 2016 Industrial Range special features are: VIBRATION Vibration Control A selection of our tools are fully equipped with a range of vibration reducing design features for smoother operation and greater comfort. By selecting a vibration controlled option, you not only decrease any potential health risks to your tool operators, but you could also massively increase your productivity levels. The vibration control feature increases the length of time the tool can be used before current ELV & EAV levels are reached. See our ELV & EAV chart on page 62/63 for individual product statistics. CONTROL Torque Control E TORQUE T Speed Regulator D D E E P S Auto Shut-off O T U A Our Torque control icon indicates tools that C CONTROL L incorporate design features that allow for a more accurate & controlled tightening. Torque limited impact wrenches prevent over tightening, torque adjustable impulse wrenches & screwdrivers guarantee the correct torque is applied every time. Integral Speed Regulators allow for the adjustment of the tool speed. This enables the tool to be used across applications such as drilling different types of materials or using a grinding or sanding tool for finer work for such as detailed & controlled polishing applications. REGULATOR Auto Shut-off models feature a range of shut-off systems to allow the tool to stop when the correct torque is achieved. Not only does this give feed back to the operator but prevents damage to components that can occur if over tightened. SH SHUT-OFF FF Code Description Page Number Vibration Control Torque Control Speed Regulator RR-16N 1/2 / RR-16N T 1/2 Impact Wrench 6 RR-18N / RR-18N T Impact Wrench 7 RRI-30AT / RRI-40AT / RRI-50AT / RRI-60AT / RRI-70AT Impulse Wrenches 15 RRI-30T / RRI-40T / RRI-50T / RRI-60T / RRI-70T Impulse Wrenches 15 RRI-80T / RRI-90T / RRI-100T / RRI-130T / RRI-150T Impulse Wrenches 16 RRI-180T / RRI-200T Impulse Wrenches 16 RRI-30STA / RRI-40STA / RRI-50STA / RRI-60STA / RRI-70STA Impulse Wrenches 17 RRI-30ST / RRI-40ST / RRI-50ST / RRI-60ST / RRI-70ST RRI-80ST Impulse Wrenches 17 RRI-50RTA / RRI-60RTA / RRI-70RTA Impulse Wrenches 17 RRI-50RT / RRI-60RT / RRI-70RT / RRI-70RGT / RRI-70RHT / RRI-80RHT Impulse Wrenches 17 RRW-2203 Ratchet Wrenches 20 RRW-2403 Ratchet Wrenches 20 RRQ-2404 Ratchet Wrenches 20 RR-02SC / RR-06SC Screwdrivers 24 RR-02SP Screwdrivers 24 RRI-SP31706 / RRI-SP31108 / RRI-SP30710 / RRI-SP30511 / RRI-SP21704 / RRI-SP21104 Screwdrivers 26 RRI-SP20705 / RRI-SP11602 / RRI-SP10902 RRI-SD31706 / RRI-SD31108 / RRI-SD30710 / RRI-SD30511 / RRI-SD21704 / RRI-SD21104 RRI-SD20705 / RRI-SD11602 / RRI-SD10902 Screwdrivers 27 RRI-SL31706 / RRI-SL31108 / RRI-SL30710 / RRI-SL30511 / RRI-SL21704 / RRI-SL21104 / RRI-SL20705 RRI-SL11602 / RRI-SL10902 Screwdrivers 27 RRG-2034 / RRG-2044 / RRG-2055 Angle Grinders 28 TAG-45MLH / TAG-50MLH Angle Grinders 29 TAG-900QJL Angle Grinders 29 RRG-200RE / RRG-500RE Die Grinders 32 RRG-200REL / RRG-500REL Die Grinders 35 RRG-2090 Die Grinders 35 RRI-6150-5SV Sanders 39 RRI-6150-5NV Sanders 39 RRI-6150-5CV Sanders 39 RRI-4006VL / RRI-4007VL Needle Scalers 43 VL219E Needle Scalers 43 10RDS-2500 Drills 46 10RDS-4000 Drills 47 RRI-2116P Drills 47 RRI-4021/4 Haers 52 RRJ-8205 Saws 58 RRJ-8210 Saws 58 Auto Shut-off 4 www.yokota.co.uk Order Line: 01909 552471

Impact Wrenches Our impact wrench range is available in 3/8, ½", ¾" & 1 square drives covering M12 to M36 bolt sizes and offering a maximum torque level of 2700Nm. The Red Rooster Automotive & Industrial range will cover most general assembly and disassembly applications, with our Toku Industrial range offering the highest possible quality level available. Suitable for all domestic and coercial vehicle maintenance applications through to civil engineering & the offshore industry. The MI-3800 series has a closed haer impact mechanism designed specifically for the heavy industrial and tool hire sectors. The closed haer design vastly reduces any tool damage risks associated with incorrect use. All tools featured are manufactured to the highest possible standards using only the highest quality raw materials and most advanced assembly techniques.

Impact Wrenches Pistol Models - 3/8" & ½" Drive E TORQUE T C CONTROL L RR-16N 3/8 AUTOMOTIVE 340Nm Maximum torque output Compact and lightweight 3/8 Square drive Suitable for light industrial & vehicle maintenance applications Ergonomic & well balanced pistol design Composite body construction for greater comfort Twin haer impact mechanism 3 level power adjustment Exhausts through rubber sealed grip with integrated silencer for increased operator comfort 12 bolt capacity Vibration level 4.6m/s² List 217 RR-160H AUTOMOTIVE 580Nm Maximum torque output ½ Square drive Suitable for light industrial & vehicle maintenance applications Ergonomic & well balanced pistol design Compact and lightweight Dynapact haer impact mechanism 4 level power adjustment Exhausts through rubber sealed grip with integrated silencer for increased operator comfort 16 bolt capacity Vibration level 11m/s² List 183 RR-16N 1/2 RR-16N T 1/2 AUTOMOTIVE RR-16N 405Nm Maximum torque output RR-16NT Tightening torque limited to 90Nm to ensure no over tightening ½ Square drive Suitable for light industrial & vehicle maintenance applications Ergonomic & well balanced pistol design Composite body construction for greater comfort Compact and lightweight Twin haer impact mechanism 3 level power adjustment Exhausts through rubber sealed grip with integrated silencer for increased operator comfort 14 bolt capacity Vibration level 4.6m/s² RR-16N 1/2 List 217 RR-16N T 1/2 List 272 Type Brand Square drive Type (1) Bolt capacity Impactmechanism RPM Torque (2) Nm Power adjustment (3) Air cons. l/s Weight kg Inletthread Hosediameter m/s² Vibration Noise level db(a) RR-16N 3/8 RRA 3/8" R 12.0 Twin-Haer 11,000 340 R 3 levels 5.0 1.3 PT 1/4" 6.5 4.6 83 RR-160 H RRA 1/2" R 16.0 Dynapact 8,000 580 R/L 4 levels 8.0 2.3 PT 1/4" 10.0 11.0 82 RR-16N 1/2 RRA 1/2" R 14.0 Twin-Haer 11,000 405 R 3 levels 5.0 1.2 PT 1/4" 6.5 4.6 83 RR-16N T 1/2 RRA 1/2" R 14.0 Twin-Haer 11,000 405 90 Nm (4) 5.0 1.2 PT 1/4" 6.5 4.6 83 (1) Type: R = Ring type / H = Hole type / R + H = Ring + Hole type (2) Please see page 12 for impact mechanism detail (3) All impact wrenches are right and left turning / "R 3 levels" means: 3 positions clockwise & counter clockwise full power (4) RR-16N T: maximum tightening torque: 90 Nm, full power in untightening 6 www.yokota.co.uk Order Line: 01909 552471

Impact Wrenches Pistol Models - ½" Drive E TORQUE T C CONTROL L RR-18N RR-18N T RR-18N/SETSTD RR-18N/SETLNG MI-17HEG AUTOMOTIVE AUTOMOTIVE INDUSTRIAL RR-18NT Tightening torque SETSTD Includes: 650Nm Maximum torque output limited to 90Nm to ensure no 1 x RRI-18N ½" Square drive over tightening 5x Standard length ½ Action Impact Suitable for industrial & vehicle ½ Square drive Sockets maintenance applications RR-18N 815Nm Maximum torque (17-19-21-22-24) Compact & lightweight output 1x 100 extension bar Twin haer impact mechanism Suitable for light industrial & vehicle Blow moulded carry case 4 Level power adjustment maintenance applications SETLNG Includes: Exhausts through rubber sealed grip Ergonomic & well balanced pistol 1 x RRI-18N design 5x Long length ½ Action Impact with integrated silencer for increased operator comfort Composite body construction for Sockets Steel haer case for increased greater comfort (17-19-21-22-24) durability Compact and lightweight 1x 100 extension bar Vibration level 7.4m/s² Twin haer impact mechanism Blow moulded carry case 3 level power adjustment Exhausts through rubber sealed grip with integrated silencer for increased operator comfort 16 bolt capacity Vibration level 4.8 & 3.1m/s² RR-18N/SETSTD List 281 RR-18N/SETLNG List 296 List 303 RR-18N List 236 RR-18N T List 272 Type Brand Square drive Type (1) Bolt capacity Impactmechanism RPM Torque (2) Nm Power adjustment (3) Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RR-18N RRA 1/2" R 16.0 Twin-Haer 7,000 815 R 3 levels 8.2 2.0 PT 1/4" 10.0 4.8 83 RR-18N T RRA 1/2" R 16.0 Twin-Haer 7,000 815 90 Nm (4) 8.2 2.0 PT 1/4" 10.0 3.1 83 MI-17HEG TOKU 1/2" R 16.0 Twin-Haer 5,500 650 R/L 4 levels 8.3 2.4 PT 1/4" 10.0 7.4 88 (1) Type: R = Ring type / H = Hole type / R + H = Ring + Hole type (2) Please see page 12 for impact mechanism detail (3) All impact wrenches are right and left turning / "R 3 levels" means: 3 positions clockwise & counter clockwise full power (4) RR-18N T: maximum tightening torque: 90 Nm, full power in untightening Order Line: 01909 552471 www.yokota.co.uk 7

Impact Wrenches Pistol Models - ¾" Drive RR-24N AUTOMOTIVE 1,625Nm Maximum torque output ¾ Square drive Suitable for light industrial & vehicle maintenance applications Ergonomic & well balanced pistol design Composite body construction for greater comfort Compact and lightweight Twin haer impact mechanism 3 Level power adjustment Exhausts through rubber sealed grip with integrated silencer for increased operator comfort 24 bolt capacity Vibration level 4.8m/s² List 527 MI-20P INDUSTRIAL 1,000Nm Maximum torque output ¾" Square drive Suitable for industrial & vehicle maintenance applications Compact & lightweight Twin haer impact mechanism 4 Level power adjustment Ergonomic & well balanced design Exhausts through handle with integrated silencer for increased operator comfort Vibration level 4.6m/s² List 840 Type Brand Square drive Type (1) Bolt capacity Impactmechanism RPM Torque (2) Nm Power adjustment (3) Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RR-24N RRA 3/4" R+H 24.0 Twin-Haer 5,500 1,625 R 3 levels 9.1 3.4 PT 3/8" 10.0 4.8 90 MI-20P TOKU 3/4" R+H 24.0 Twin-Haer 5,000 1,000 R/L 4 levels 9.6 3.9 PT 3/8" 10.0 4.6 92 (1) Type: R = Ring type / H = Hole type / R + H = Ring + Hole type (2) Please see page 12 for impact mechanism detail (3) All impact wrenches are right and left turning / "R 3 levels" means: 3 positions clockwise & counter clockwise full power 8 www.yokota.co.uk Order Line: 01909 552471

Breakers Impact Wrenches Pistol Models - 1" Drive RR-24N 1 AUTOMOTIVE 1900Nm Maximum torque output 1 Square drive Suitable for light industrial & vehicle maintenance applications Ergonomic & well balanced pistol design Composite body construction for greater comfort Compact and lightweight Twin haer impact mechanism 3 Level power adjustment Exhausts through rubber sealed grip with integrated silencer for increased operator comfort 24 bolt capacity Vibration level 4.8m/s² RR-27P List 575 LIGHT INDUSTRY 2250Nm Maximum torque output 1 Square drive Suitable for light industrial & vehicle maintenance applications Ergonomic & well balanced pistol design Composite body construction for greater comfort Compact and lightweight Twin haer impact mechanism 3 Level power adjustment Exhausts through rubber sealed grip with integrated silencer for increased operator comfort 27 bolt capacity Vibration level 8.8m/s² MI-3800PR List 963 INDUSTRIAL 2,100Nm Maximum torque output 1" Square drive Suitable for industrial & coercial vehicle applications Closed haer impact mechanism for enhanced tool protection 4 Level power adjustment Ergonomic & well balanced Exhausts through integrated rotating silencer for increased operator comfort Vibration level 8m/s² List 1,515 Type Brand Square drive Type (1) Bolt capacity Impactmechanism RPM Torque (2) Nm Power adjustment (3) Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RR-24N 1 RRA 1" R+H 24.0 Twin-Haer 5,500 1,900 R 3 levels 9.1 3.7 PT 3/8" 10.0 4.8 90 RR-27P RRA 1" R+H 27.0 Twin-Haer 6,000 2,250 R/L 3 levels 15.0 6.3 PT 1/2" 13.0 8.8 96 MI-3800PR TOKU 1" R+H 36.0 Closed Haer 4,500 2,100 R/L 4 levels 15.0 9.3 PT 1/2" 13.0 8.0 84 (1) Type: R = Ring type / H = Hole type / R + H = Ring + Hole type (2) Please see page 12 for impact mechanism detail (3) All impact wrenches are right and left turning / "R 3 levels" means: 3 positions clockwise & counter clockwise full power Order Line: 01909 552471 www.yokota.co.uk 9

Pavement Impact Wrenches Breakers Straight Models MI-3800ESR INDUSTRIAL 2,100Nm Maximum torque output 1" Square drive Suitable for industrial & coercial vehicle applications Closed haer impact mechanism for enhanced tool protection 4 Level power adjustment Ergonomic & well balanced in-line design Vibration level 8m/s² List 1,429 Type Brand Square drive Type (1) Bolt capacity Impactmechanism RPM Torque (2) Nm Power adjustment (3) Air cons. l/s Weight kg Inletthread Hosediameter m/s² Vibration Noise level db(a) MI-3800ESR TOKU 1" R+H 36.0 Closed Haer 4,500 2,100 R/L 4 levels 15.0 9.3 PT 1/2" 13.0 8.0 84 (1) Type: R = Ring type / H = Hole type / R + H = Ring + Hole type (2) Please see page 12 for impact mechanism detail (3) All impact wrenches are right and left turning / "R 3 levels" means: 3 positions clockwise & counter clockwise full power 10 www.yokota.co.uk Order Line: 01909 552471

Pavement Impact Wrenches Breakers Straight Models - Extended Anvil RR-36E AUTOMOTIVE 1 Square drive 6 Extended anvil 2,700Nm Maximum torque output Suitable for coercial vehicle wheel nut applications 36 bolt capacity Vibration level 8.6m/s² List 846 RRI-37E LIGHT INDUSTRY 2,200Nm Maximum torque output 1 Square drive 6 Extended anvil Vibration level 17m/s² Suitable for coercial vehicle wheel nut applications 36 bolt capacity Vibration level 17m/s² List 1,150 MI-3800ELR INDUSTRIAL 2,000Nm Maximum torque output 1" Square drive 6" Extended anvil Suitable for truck wheel nut, industrial and coercial vehicle applications Closed haer impact mechanism for enhanced tool protection 4 Level power adjustment Ergonomic & well balanced in-line design Vibration level 8m/s² List 1,437 Type Brand Square drive Type (1) Bolt capacity Impactmechanism RPM Torque (2) Nm Power adjustment (3) Air cons. l/s Weight kg Inletthread Hosediameter m/s² Vibration Noise level db(a) RR-36E RRA 1" R+H 36.0 Twin-Haer 5,000 2,700 R/L 4 levels 24.0 11.0 PT 1/2" 13.0 8.6 102 RRI-37E RRI 1" R+H 36.0 Twin-Haer 6,000 2,200 R/L 3 levels 15.0 8.75 PT 1/2" 13.0 17.0 99 MI-3800ELR TOKU 1" R+H 36.0 Closed Haer 4,500 2,000 R/L 4 levels 15.0 9.9 PT 1/2" 13.0 8.0 84 (1) Type: R = Ring type / H = Hole type / R + H = Ring + Hole type (2) Please see page 12 for impact mechanism detail (3) All impact wrenches are right and left turning / "R 3 levels" means: 3 positions clockwise & counter clockwise full power Order Line: 01909 552471 www.yokota.co.uk 11

Impact Wrenches Impact Mechanisms The 2-haer system makes 2 impacts per rotation at both sides of the anvil. The twin-haer system makes 2 impacts per rotation at both sides of the anvil. Same principal as the 2-haer system, manufactured differently. The closed haer system is constructed, without a loose haer pin to prevent breakage. The working principle is based on the 1-haer system which makes 1 impact per rotation at both sides of the anvil. This produces greater energy per blow. The Dynapact impact system has two pins haering on the anvil, making 1 impact per rotation at both sides of the anvil at the same time. This system gives high torque output and is well balanced. Technical Data DIMENSIONS Type A A* B MI-17HEG 178-31 MI-20P 215-38 MI-3800ESR 355-55 MI-3800ELR - 504 55 RR-160H 185-30 RR-16N 150 30 RR-18N 185-30 RR-18NT 185-30 RR-24N 210 50 RR-27P 210-41 RR-36E - 520 58 RRI-37E - 515 52 12 www.yokota.co.uk Order Line: 01909 552471

Impulse Wrenches The Red Rooster Industrial impulse wrench range brings automotive assembly technologies to industrial applications. Impulse Wrenches have been used widely in the assembly industry for many years where high speed & repeatable tightening are a key requirement. Coupling this with virtually no vibration or torque kick back makes the Red Rooster Industrial impulse wrench range one of the safest & accurate fastening tools on the market today. All tools feature double air chamber motors, twin blade impulse units & auto shut off when the required torque is archived. Fully adjustable, the range covers 6-450Nm across the pistol, straight case & angle head range.

Impulse Wrenches Main Features Torque Conventional Impact Wrench X Ring main shaft sealing increases both repeatability & reliability Twin Blade impulse unit featuring drive roller blades for reduced noise & vibration 0,2-1 sec Adjustable range of Oil-Pulse Wrench Time Integrated cylinder & end plate for increased motor efficiency One hand reverse operation for right or left handed operators Out In Easy Torque Adjustment Simple & secure mechanical torque adjustment Out In Out Out Double Chamber Air Motor 9 vane motor offers a compact, lightweight & hard wearing design, leading to a high power to weight ratio & a lessened reduction in motor speed when under load 360 fully adjustable & silenced exhaust Speed R.P.M. Conventional Motor Double-Chamber Motor

Impulse Wrenches Pistol Shut-off Models - 6-57Nm E TORQUE T E TORQUE T C CONTROL L C CONTROL L VIBRATION VIBRATION CONTROL CONTROL T O U A O T U A SH SHUT-OFF FF SH SHUT-OFF FF RRI-30AT / RRI-40AT / RRI-50AT RRI-60AT / RRI-70AT RRI-30T / RRI-40T / RRI-50T RRI-60T / RRI-70T INDUSTRIAL INDUSTRIAL Tool torque ranges 6-47Nm Pistol impulse wrench ¼ Hex drive Auto shut-off Low vibration level <2.5m/s² Torque adjustable Tool torque ranges 7-57Nm Pistol impulse wrench 3/8 Square drive Auto Shut-off Low vibration level <2.5m/s² Torque adjustable List 2,630 List 2,690 Type Brand Square / Hex drive Bolt capacity RPM Torque Range Nm Air cons. l/s Weight kg Inletthread Hosediameter Noise level db(a) RRI-30AT RRI 1/4" Hex 6.0 4,600 6.0-12.5 3.7 0.89 PT 1/4" 6.5 78 RRI-40AT RRI 1/4" Hex 6.0-8.0 4,600 10.0-18.0 3.7 0.92 PT 1/4" 6.5 78 RRI-50AT RRI 1/4" Hex 8.0 7,200 16.0-26.0 5.3 0.92 PT 1/4" 6.5 80 RRI-60AT RRI 1/4" Hex 8.0 6,200 20.0-30.0 6.2 1.0 PT 1/4" 8.0 82 RRI-70AT RRI 1/4" Hex 10.0 7,200 32.0-47.0 7.0 1.35 PT 1/4" 8.0 82 RRI-30T RRI 3/8" Square 6.0 4,600 7.0-12.5 3.7 0.89 PT 1/4" 6.5 78 RRI-40T RRI 3/8" Square 6.0-8.0 4,600 11.0-19.0 3.7 0.92 PT 1/4" 6.5 78 RRI-50T RRI 3/8" Square 8.0 7,200 16.0-27.0 5.3 0.92 PT 1/4" 6.5 80 RRI-60T RRI 3/8" Square 8.0-10.0 6,200 22.0-35.0 6.2 1.0 PT 1/4" 8.0 82 RRI-70T RRI 3/8" Square 10.0 7,200 37.0-57.0 7.0 1.35 PT 1/4" 8.0 82 Order Line: 01909 552471 www.yokota.co.uk 15

Impulse Wrenches Pistol Shut-off Models - 40-450Nm E TORQUE T E TORQUE T C CONTROL L C CONTROL L VIBRATION VIBRATION CONTROL CONTROL T O U A O T U A SH SHUT-OFF FF SH SHUT-OFF FF RRI-80T / RRI-90T / RRI-100T RRI-130T / RRI-150T RRI-180T / RRI-200T INDUSTRIAL INDUSTRIAL Tool torque ranges 40-210Nm Pistol impulse wrench 3/8", ½ & ¾ Square drive Auto shut-off Low vibration level <2.5m/s² Torque adjustable Tool torque ranges 180-450Nm Pistol impulse wrench ¾ Square drive Auto shut-off Low vibration level Torque adjustable List 3,005 List 5,980 Type Brand Square / Hex drive Bolt capacity RPM Torque Range Nm Air cons. l/s Weight kg Inletthread Hosediameter Noise level db(a) RRI-80T RRI 3/8" Square 10.0-12.0 5,100 40.0-68.0 9.3 1.21 PT 1/4" 8.0 82 RRI-90T RRI 1/2" Square 12.0 5,400 64.0-90.0 8.3 1.55 PT 1/4" 8.0 83 RRI-100T RRI 1/2" Square 12.0-14.0 5,300 85.0-120.0 8.7 1.87 PT 1/4" 8.0 84 RRI-130T RRI 1/2" Square 14.0-16.0 3,600 123.0-148.0 11.6 2.26 PT 1/4" 11.0 86 RRI-150T RRI 3/4" Square 16.0 3,700 165.0-210.0 11.6 3.10 PT 1/4" 11.0 86 RRI-180T RRI 3/4" Square 16.0-18.0 2,700 180.0-255.0 12.2 3.8 PT 1/4" 11.0 86 RRI-200T RRI 3/4" Square 18.0-20.0 3,000 230.0-450.0 26.0 4.25 PT 1/4" 13.0 88 16 www.yokota.co.uk Order Line: 01909 552471

Impulse Wrenches Straight & Angle Shut-off Models - 6-70Nm RRI-30STA / RRI-40STA RRI-50STA / RRI-60STA RRI-70STA Tool torque ranges 6-40Nm Straight impulse wrench ¼ Hex drive Auto shut-off Low vibration level <2.5m/s² Torque adjustable RRI-30ST / RRI-40ST RRI-50ST / RRI-60ST RRI-70ST / RRI-80ST INDUSTRIAL INDUSTRIAL Tool torque ranges 7-68Nm Straight impulse wrench 3/8 Square drive Auto shut-off Low vibration level <2.5m/s² Torque adjustable T E TORQUE VIBRATION O T U A T E TORQUE VIBRATION O T U A C CONTROL L CONTROL SH SHUT-OFF FF C CONTROL L CONTROL SH SHUT-OFF FF List 2,590 List 2,600 RRI-50RTA / RRI-60RTA RRI-70RTA INDUSTRIAL INDUSTRIAL Tool torque ranges 9.5-29Nm Angle head impulse wrench ¼ Hex drive Auto shut-off Low vibration level <2.5m/s² Torque adjustable RRI-50RT / RRI-60RT RRI-70RT / RRI-70RGT RRI-70RHT / RRI-80RHT Tool torque ranges 10.5-70Nm Angle head impulse wrench 3/8 & ½ Square drive Auto shut-off Low vibration level <2.5m/s² Torque adjustable T E TORQUE VIBRATION O T U A T E TORQUE VIBRATION O T U A C CONTROL L CONTROL SH SHUT-OFF FF C CONTROL L CONTROL SH SHUT-OFF FF List 3,352 List 3,520 Type Brand Square / Hex drive Bolt capacity RPM Torque Range Nm 9,3Air cons. l/s Weight kg Inletthread Hose diameter Noise level db(a) RRI-30STA RRI 1/4" Hex 6.0 4,200 6.0-11.5 3.7 0.77 PT 1/4" 6.5 78 RRI-40STA RRI 1/4" Hex 6.0-8.0 4,200 10.0-17.0 3.7 0.80 PT 1/4" 6.5 78 RRI-50STA RRI 1/4" Hex 8.0 6,800 15.0-25.0 5.3 0.80 PT 1/4" 6.5 80 RRI-60STA RRI 1/4" Hex 8.0 6,000 20.0-30.0 6.2 0.86 PT 1/4" 8.0 80 RRI-70STA RRI 1/4" Hex 8.0-10.0 5,000 28.0-40.0 6.2 0.97 PT 1/4" 8.0 80 RRI-30ST RRI 3/8" Square 6.0 4,200 7.0-12.5 3.7 0.80 PT 1/4" 6.5 78 RRI-40ST RRI 3/8" Square 6.0-8.0 4,200 11.0-19.0 3.7 0.80 PT 1/4" 6.5 78 RRI-50ST RRI 3/8" Square 8.0 6,800 16.0-27.0 5.3 0.80 PT 1/4" 6.5 80 RRI-60ST RRI 3/8" Square 8.0-10.0 6,000 22.0-35.0 6.2 0.86 PT 1/4" 8.0 80 RRI-70ST RRI 3/8" Square 10.0 5,000 31.0-47.0 6.2 0.97 PT 1/4" 8.0 80 RRI-80ST RRI 3/8" Square 10.0-12.0 6,100 40.0-68.0 9.3 1.15 PT 1/4" 8.0 82 RRI-50RTA RRI 1/4" Hex 6.0-8.0 4,300 9.5-16.0 4.8 1.20 PT 1/4" 6.5 80 RRI-60RTA RRI 1/4" Hex 8.0 4,700 15.0-22.0 6.2 1.30 PT 1/4" 8.0 80 RRI-70RTA RRI 1/4" Hex 8.0 4,500 20.0-29.0 6.2 1.40 PT 1/4" 8.0 80 RRI-50RT RRI 3/8" Square 6.0-8.0 4,300 10.5-17.0 4.8 1.20 PT 1/4" 6.5 80 RRI-60RT RRI 3/8" Square 8.0 4,700 16.0-24.0 6.2 1.30 PT 1/4" 8.0 80 RRI-70RT RRI 3/8" Square 8.0-10.0 4,500 22.0-31.0 6.2 1.40 PT 1/4" 8.0 80 RRI-70RGT RRI 3/8" Square 10.0 2,000 32.0-45.0 6.2 1.60 PT 1/4" 8.0 82 RRI-70RHT RRI 1/2" Square 10.0-12.0 2,200 46.0-60.0 6.2 1.60 PT 1/4" 8.0 82 RRI-80RHT RRI 1/2" Square 10.0-12.0 2,800 50.0-70.0 9.3 1.70 PT 1/4" 8.0 82 Order Line: 01909 552471 www.yokota.co.uk 17

Impulse Wrenches Technical Data DIMENSIONS C E D A B Type A B C D E RRI-30AT 163 168 Ø46 21 Ø17,5 RRI-40AT 170 168 Ø46 27 Ø17,5 RRI-50AT 170 168 Ø46 27 Ø17,5 RRI-60AT 181 168 Ø46 27 Ø17,5 RRI-70AT 194 172 Ø53,5 28 Ø17,5 RRI-30T 163 168 Ø46 24 Ø12 RRI-40T 167 168 Ø46 24 Ø12 RRI-50T 167 168 Ø46 24 Ø12 RRI-60T 178 168 Ø46 24 Ø12 RRI-70T 194 172 Ø53,5 25 Ø12 RRI-80T 194 170 Ø53,5 25 Ø12 RRI-90T 200 192 Ø53,5 31 Ø16 RRI-100T 209 195 Ø59 32 Ø16 RRI-130T 216 204 Ø64 31 Ø16 RRI-150T 239 215 Ø72 40 Ø25 RRI-180T 263 232 Ø78 41 Ø25 RRI-200T 250 239 Ø80 41 Ø25 DIMENSIONS ØD C ØB A Type A B C D RRI-30STA 219 Ø46 21 Ø17,5 RRI-40STA 224 Ø46 27 Ø17,5 RRI-50STA 224 Ø46 27 Ø17,5 RRI-60STA 225 Ø46 27 Ø17,5 RRI-70STA 244 Ø48 27 Ø17,5 RRI-30ST 219 Ø46 24 Ø12 RRI-40ST 221 Ø46 24 Ø12 RRI-50ST 221 Ø46 24 Ø12 RRI-60ST 231 Ø46 24 Ø12 RRI-70ST 244 Ø48 25 Ø12 RRI-80ST 244 Ø53,5 25 Ø12 DIMENSIONS B C D A Type A B C D E RRI-50RTA 253 45 16 16 Ø11 RRI-60RTA 264 45 16 16 Ø11 RRI-70RTA 272 45 16 16 Ø11 RRI-50RT 253 45 14 16 Ø12 RRI-60RT 264 45 14 16 Ø12 RRI-70RT 272 45 14 16 Ø12 RRI-70RGT 281 47 14 21 Ø16 RRI-70RHT 281 47 21 21 Ø16 RRI-80RHT 281 47 21 21 Ø16 ØE 18 www.yokota.co.uk Order Line: 01909 552471

Ratchet Wrenches 3/8 & ½ Ratchet wrenches from Red Rooster for all general assembly & disassembly applications. Widely used in most automotive repair & general workshop environments for quickly pre-tightening fasteners prior to the final torque being applied.

Ratchet Wrenches Ratchet Wrenches D E E D P S D D E E P S D D E E P S REGULATOR REGULATOR REGULATOR RRW-2203 RRW-2403 RRW-2404 AUTOMOTIVE AUTOMOTIVE AUTOMOTIVE 32Nm Maximum torque output 3/8 Square drive Suitable for light industrial & vehicle maintenance applications Composite body construction for greater comfort Compact & lightweight 10 bolt capacity Vibration level 4.3m/s² 68Nm Maximum torque output 3/8 Square drive Suitable for light industrial & vehicle maintenance applications Composite body construction for greater comfort Compact & lightweight 12 bolt capacity Vibration level 5.8m/s² 68Nm Maximum torque output ½ Square drive Suitable for light industrial & vehicle maintenance applications Composite body construction for greater comfort Compact & lightweight 12 bolt capacity Vibration level 5.8m/s² List 131 List 140 List 140 Type Brand Square drive Bolt capacity RPM Torque Nm Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RRW-2203 RRA 3/8" 10.0 270 32.0 5.0 0.5 PT 1/4" 6.5 4.3 85 RRW-2403 RRA 3/8" 12.0 150 68.0 6.0 1.2 PT 1/4" 6.5 5.8 85 RRW-2404 RRA 1/2" 12.0 150 68.0 6.0 1.2 PT 1/4" 6.5 5.8 85 TECHNICAL DATA Type A B RRW-2203 180 32 RRW-2403 250 40 RRW-2404 250 45 20 www.yokota.co.uk Order Line: 01909 552471

Impact Sockets A selection of impact sockets from our Action range, available in 3/8, ½", ¾" & 1" square drives with bolt sizes 6-60 in both standard and long length. Adapters, extension bars and retaining pin & ring sets are also available. All Action impact sockets are manufactured in accordance with DIN3121 & DIN3129 and the European Regulation Directive of Machinery 2006/42/EG & ISO11148-6. This states that only impact sockets are to be used with power tools. Many additional sizes are available to order from our full Action Impact Socket range. Please see the Action Socket Catalogue for further details. Warning: Never use worn sockets. If sockets do not fit correctly this may cause a loss of power and wear on the anvil. Socket Dimensional Drawings Please refer to socket dimensions over page DRWG A DRWG B DRWG C DRWG D DRWG E Order Line: 01909 552471 www.yokota.co.uk 21

Impact Sockets 6-Point Standard Type ACCESSORIES 3/8" A/F DRWG Pins and Rings Type Square-drive List DO1038-0-000 3/8" 3 DO1012-0-000 1/2" 3 DO1034-0-000 3/4" 3 DO1100-0-000 1" 4 Long Length D1 D2 L L2 List Type L L2 List Metrical DO1038-0-007 7 A 12,5 19 30 8 7 DO1038-1-007 63 12 10 DO1038-0-008 8 A 14 19 30 8 7 DO1038-1-008 65 12 10 DO1038-0-009 9 A 15 19 30 8 7 DO1038-1-009 65 12 10 DO1038-0-010 10 A 16 19 30 8 7 DO1038-1-010 65 12 10 DO1038-0-011 11 A 17.5 19 30 9 7 DO1038-1-011 65 12 10 DO1038-0-012 12 B 19 19 30 9 7 DO1038-1-012 65 12 10 DO1038-0-013 13 A 20 22 30 9 7 DO1038-1-013 65 25 10 DO1038-0-014 14 A 21 22 30 9 7 DO1038-1-014 65 25 10 DO1038-0-015 15 B 22 22 30 11 7 DO1038-1-015 65 25 10 DO1038-0-016 16 C 24 22 30 11 7 DO1038-1-016 65 25 12 DO1038-0-017 17 C 25 22 30 11 7 DO1038-1-017 65 25 12 DO1038-0-018 18 C 26 22 30 11 7 DO1038-1-018 65 25 13 DO1038-0-019 19 C 27,5 22 30 11 7 DO1038-1-019 65 25 14 3/4" 6-Point Standard Type A/F DRWG Long Length D1 D2 L L2 List Type L L2 List Metrical DO3034-0-013 13 A 25 44 50 9 19 DO3034-1-013 95 133 31 DO3034-0-017 17 A 31 44 50 12 19 DO3034-1-017 95 17 31 DO3034-0-018 18 A 32 44 50 13 19 DO3034-1-018 95 18 31 DO3034-0-019 19 A 33 44 50 13 19 DO3034-1-019 95 19 31 DO3034-0-021 21 A 36 44 50 15 19 DO3034-1-021 95 21 31 DO3034-0-022 22 A 37 44 50 15 21 DO3034-1-022 95 22 31 DO3034-0-024 24 A 40 44 50 16 21 DO3034-1-024 95 24 31 DO3034-0-027 27 A 43 44 54 16 21 DO3034-1-027 95 27 31 DO3034-0-030 30 C 47 44 54 21 21 DO3034-1-030 95 30 31 DO3034-0-032 32 C 49 44 56 21 21 DO3034-1-032 95 32 31 DO3034-0-033 33 C 51 44 56 22 24 DO3034-1-033 95 33 32 DO3034-0-036 36 C 54 44 56 22 24 DO3034-1-036 95 36 35 DO3034-0-038 38 C 57 44 58 24 27 DO3034-1-038 95 38 36 DO3034-0-041 41 C 61 44 58 24 30 DO3034-1-041 95 38 38 DO3034-0-046 46 C 67 44 63 27 33 DO3034-1-046 95 38 46 DO3034-0-050 50 C 71 54 72 35 40 DO3034-1-050 95 38 65 Adaptors with pin-hole Type Description List DO8038-0-14 Impact Adaptor 3/8" x 1/4" 14 DO8038-0-012 Impact Adaptor 3/8" x 1/2" 14 DO8012-0-034 Impact Adaptor 1/2" x 3/4" 16 DO8034-0-012 Impact Adaptor 3/4" x 1/2" 24 DO8034-0-100 Impact Adaptor 3/4" x 1" 29 DO8100-0-034 Impact Adaptor 1" x 3/4" 33 1/2" 6-Point Standard Long Length Type A/F Metrical DRWG D1 D2 L L2 List Type L L2 List DO2012-0-008 8 A 14,5 24 38 9 8 DO2012-1-008 78 13 10 DO2012-0-009 9 A 16 24 38 12 8 DO2012-1-009 78 14 10 DO2012-0-010 10 A 17 24 38 12 8 DO2012-1-010 78 14 10 DO2012-0-012 12 A 20 24 38 12 8 DO2012-1-012 78 14 10 DO2012-0-013 13 A 21 24 38 12 8 DO2012-1-013 78 14 10 DO2012-0-014 14 A 22 24 38 12 8 DO2012-1-014 78 17 10 DO2012-0-015 15 A 24 24 38 12 8 DO2012-1-015 78 17 10 DO2012-0-016 16 A 25 26 38 12 8 DO2012-1-016 78 17 10 DO2012-0-017 17 A 26 26 38 13 8 DO2012-1-017 78 17 10 DO2012-0-018 18 A 27,5 28 38 13 9 DO2012-1-018 78 17 11 DO2012-0-019 19 A 29 30 38 13 9 DO2012-1-019 78 19 11 DO2012-0-021 21 B 32 32 38 13 9 DO2012-1-021 78 24 11 DO2012-0-022 22 C 32 32 38 13 9 DO2012-1-022 78 24 11 DO2012-0-024 24 C 35 36 45 20 9 DO2012-1-024 78 24 12 DO2012-0-025 25 C 36 36 45 20 10 DO2012-1-025 78 24 14 DO2012-0-027 27 C 39 38 50 22 10 DO2012-1-027 78 24 14 DO2012-0-028 28 C 40 38 50 22 10 DO2012-1-028 78 24 16 DO2012-0-030 30 C 42,5 38 50 22 11 DO2012-1-030 78 24 16 1" 6-Point Standard Long Length Type A/F Metrical DRWG Extension Bars with pin-hole D1 D2 L L2 List Type L L2 List DO4010-0-017 17 A 34 54 58 12 30 DO4010-1-017 100 21 46 DO4010-0-019 19 A 35.5 54 58 13 30 DO4010-1-019 100 21 46 DO4010-0-022 22 A 40 54 58 15 30 DO4010-1-022 100 21 46 DO4010-0-024 24 A 42 54 58 19 30 DO4010-1-024 100 21 46 DO4010-0-027 27 A 46 54 58 19 31 DO4010-1-027 100 23 47 DO4010-0-028 28 A 47 54 58 19 31 DO4010-1-028 100 23 47 DO4010-0-029 29 A 48 54 60 19 31 DO4010-1-029 100 50 47 DO4010-0-030 30 A 50 54 60 21 31 DO4010-1-030 100 50 47 DO4010-0-032 32 A 52 54 60 21 31 DO4010-1-032 100 50 47 DO4010-0-033 33 A 53 54 60 21 33 DO4010-1-033 100 50 47 DO4010-0-036 36 C 57 54 65 25 35 DO4010-1-036 100 64 47 DO4010-0-038 38 C 59.5 54 67 25 35 DO4010-1-038 100 64 49 DO4010-0-042 42 C 65 54 74 27 43 DO4010-1-042 100 64 52 DO4010-0-046 46 C 69.5 54 74 30 43 DO4010-1-046 100 62 57 DO4010-0-050 50 C 74 54 80 35 57 DO4010-1-050 100 62 68 DO4010-0-055 55 C 81 54 84 35 71 DO4010-1-055 100 60 82 DO4010-0-060 60 C 87 54 87 42 77 DO4010-1-060 105 77 103 Type Description List DO7038-0-150 Impact-Extension bar 3/8" x 150 15 DO7038-0-250 Impact-Extension bar 3/8" x 250 33 DO7012-0-150 Impact-Extension bar 1/2" x 150 18 DO7012-0-300 Impact-Extension bar 1/2" x 300 29 DO7034-0-150 Impact-Extension bar 3/4" x 150 37 DO7034-0-330 Impact-Extension bar 3/4" x 330 55 DO7100-0-150 Impact-Extension bar 1" x 150 54 DO7100-0-300 Impact-Extension bar 1" x 300 83 22 www.yokota.co.uk Order Line: 01909 552471

Screwdrivers The Red Rooster Automotive & Industrial screwdriver range covers fixings & fastenings across a wide range of applications & assembly environments. Red Rooster Automotive models offer a choice of pistol or straight case, clutch or direct drive across a range of 1-16Nm. Composite housings for greater operator comfort. Our Red Rooster Industrial Range brings a choice of pistol or straight cases, a highly accurate range of tools developed for assembly applications. Composite housings for greater operator comfort & low vibration throughout the range offering high accuracy (Cmk>2 at+/-10%). Precision manufactured lube-less air motors, with the option of air on top connection for all pistol models. Order Line: 01909 552471 www.yokota.co.uk 23

Screwdrivers Pistol & Straight Models E TORQUE T E TORQUE T C CONTROL L C CONTROL L RR-02SC / RR-06SC RR-02SP / RR-06SP AUTOMOTIVE Tool torque ranges 1-16Nm Red Rooster Automotive Straight case screwdriver ¼ Hex drive Slip clutch Low vibration level Torque adjustable Composite body AUTOMOTIVE Tool torque ranges 1-16Nm Red Rooster Automotive Pistol case screwdriver ¼ Hex drive Slip clutch Low vibration level Torque adjustable Composite body RR-02SC List 272 RR-06SC List 288 RR-02SP List 241 RR-06SP List 241 Type Brand Hex drive Bolt capacity Model RPM Torque Nm Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RR-02SC RRA 1/4" Hex 5.0 Straight 1,800 1.0-6.0 10.0 1.2 PT 1/4" 10.0 1.6 85 RR-06SC RRA 1/4" Hex 6.0 Straight 800 5.0-16.0 10.0 1.4 PT 1/4" 10.0 1.6 85 RR-02SP RRA 1/4" Hex 5.0 Pistol 1,800 1.0-6.0 10.0 1.3 PT 1/4" 10.0 1.6 85 RR-06SP RRA 1/4" Hex 6.0 Pistol 800 5.0-16.0 10.0 1.4 PT 1/4" 10.0 3.5 83 24 www.yokota.co.uk Order Line: 01909 552471

Screwdrivers Direct Drive Pistol Models RR-0800DD / RR-1800DD AUTOMOTIVE Maximum tool torque 7.5Nm & 10.5Nm Red Rooster Automotive Pistol case screwdriver ¼ Hex drive Direct drive Low vibration level Composite body RR-0800DD List 262 RR-1800DD List 215 Type Brand Hex drive Bolt capacity Model RPM Torque Nm Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RR-0800DD RRA 1/4" Hex 6.0 Pistol 800 10.5 9.8 1.0 PT 1/4" 10.0 3.5 83 RR-1800DD RRA 1/4" Hex 6.0 Pistol 1,800 7.5 9.8 1.0 PT 1/4" 10.0 3.5 83 Order Line: 01909 552471 www.yokota.co.uk 25

Screwdrivers Shut-off Models - Pistol T O U A SH SHUT-OFF FF E TORQUE T C CONTRO RO CONTROL L R RRI-SP INDUSTRIAL Tool torque ranges 1-10Nm Speed ranges 550-1700 RPM High accuracy Pistol case ¼ Hex Drive Auto shut-off Low vibration level Torque adjustable Composite body List 1,190 Type Brand Hex drive Bolt capacity RPM Torque Nm Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RRI-SP31706 RRI 1/4" Hex 5.0 1,700 3.5-5.2 12.0 1.10 1/4" 6.5 <2.5 72 RRI-SP31108 RRI 1/4" Hex 5.0 1,100 3.5-6.3 12.0 1.10 1/4" 6.5 <2.5 72 RRI-SP30710 RRI 1/4" Hex 6.0 700 3.5-8.2 12.0 1.10 1/4" 6.5 <2.5 72 RRI-SP30511 RRI 1/4" Hex 6.0 550 3.5-10.0 12.0 1.10 1/4" 6.5 <2.5 72 RRI-SP21704 RRI 1/4" Hex 4.0 1,700 1.0-3.5 10.0 0.98 1/4" 6.5 <2.5 72 RRI-SP21104 RRI 1/4" Hex 4.0 1,100 1.5-4.5 10.0 0.98 1/4" 6.5 <2.5 72 RRI-SP20705 RRI 1/4" Hex 4.0 700 1.5-4.5 10.0 0.98 1/4" 6.5 <2.5 72 RRI-SP11602 RRI 1/4" Hex 4.0 1,600 0.3-1.5 8.0 0.77 1/4" 6.5 <2.5 68 RRI-SP10902 RRI 1/4" Hex 4.0 900 0.3-1.8 8.0 0.77 1/4" 6.5 <2.5 68 26 www.yokota.co.uk Order Line: 01909 552471

Screwdrivers Shut-off Models - Straight RRI-SD SH E TORQUE T T O U A SHUT-OFF FF INDUSTRIAL Tool torque ranges 1-10Nm Speed ranges 550-1700 RPM High accuracy Push start Straight case ¼ Hex drive Auto shut-off Low vibration level Torque adjustable Composite body C CONTROL L List 1,190 RRI-SL SH E TORQUE T T O U A SHUT-OFF FF INDUSTRIAL Tool torque ranges 1-10Nm Speed ranges 550-1700 RPM High accuracy Lever start Straight case ¼ Hex drive Auto shut-off Low vibration level Torque adjustable Composite body C CONTROL L List 1,190 Type Brand Hex drive Bolt capacity RPM Torque Nm Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RRI-SD31706 RRI 1/4" Hex 5.0 1,700 3.5-5.2 12.0 0.89 1/4" 6.5 <2.5 72 RRI-SD31108 RRI 1/4" Hex 5.0 1,100 3.5-6.3 12.0 0.89 1/4" 6.5 <2.5 72 RRI-SD30710 RRI 1/4" Hex 6.0 700 3.5-8.2 12.0 0.89 1/4" 6.5 <2.5 72 RRI-SD30511 RRI 1/4" Hex 6.0 550 3.5-10.0 12.0 0.89 1/4" 6.5 <2.5 72 RRI-SD21704 RRI 1/4" Hex 4.0 1,700 1.0-3.5 10.0 0.77 1/4" 6.5 <2.5 72 RRI-SD21104 RRI 1/4" Hex 4.0 1,100 1.5-4.5 10.0 0.77 1/4" 6.5 <2.5 72 RRI-SD20705 RRI 1/4" Hex 4.0 700 1.5-4.5 10.0 0.77 1/4" 6.5 <2.5 72 RRI-SD11602 RRI 1/4" Hex 4.0 1,600 0.3-1.5 8.0 0.54 1/4" 6.5 <2.5 68 RRI-SD10902 RRI 1/4" Hex 4.0 900 0.3-1.8 8.0 0.54 1/4" 6.5 <2.5 68 RRI-SL31706 RRI 1/4" Hex 5.0 1,700 3.5-5.2 12.0 0.93 1/4" 6.5 <2.5 72 RRI-SL31108 RRI 1/4" Hex 5.0 1,100 3.5-6.3 12.0 0.93 1/4" 6.5 <2.5 72 RRI-SL30710 RRI 1/4" Hex 6.0 700 3.5-8.2 12.0 0.93 1/4" 6.5 <2.5 72 RRI-SL30511 RRI 1/4" Hex 6.0 550 3.5-10.0 12.0 0.93 1/4" 6.5 <2.5 72 RRI-SL21704 RRI 1/4" Hex 4.0 1,700 1.0-3.5 10.0 0.84 1/4" 6.5 <2.5 72 RRI-SL21104 RRI 1/4" Hex 4.0 1,100 1.5-4.5 10.0 0.84 1/4" 6.5 <2.5 72 RRI-SL20705 RRI 1/4" Hex 4.0 700 1.5-4.5 10.0 0.84 1/4" 6.5 <2.5 72 RRI-SL11602 RRI 1/4" Hex 4.0 1,600 0.3-1.5 8.0 0.59 1/4" 6.5 <2.5 68 RRI-SL10902 RRI 1/4" Hex 4.0 900 0.3-1.8 8.0 0.59 1/4" 6.5 <2.5 68 Order Line: 01909 552471 www.yokota.co.uk 27

Impact Screwdrivers Wrenches Technical Data DIMENSIONS Type A B C RR-02SP / RRI-06SP 214-165 RR-06SC 227 150 155 RR-02SC 260 50 - RR-0800DD 190-165 RR-1800DD 175-165 DIMENSIONS TYPE (DRAWING A) A B C RRI-SP11602 198 16 157 RRI-SP10902 198 16 157 RRI-SP21704 209 18 157 RRI-SP21104 209 18 157 RRI-SP20705 209 18 157 RRI-SP31706 238 18 156 RRI-SP31108 238 18 157 RRI-SP30710 238 18 157 RRI-SP30511 238 18 157 B A DRAWING A C TYPE (DRAWING B) A B TYPE (DRAWING B) A B A RRI-SD11602 228 16 RRI-SD10902 228 16 RRI-SD21704 244 18 RRI-SD21104 244 18 RRI-SD20705 244 18 RRI-SD31706 276 18 RRI-SD31108 276 18 RRI-SD30710 276 18 RRI-SD30511 276 18 RRI-SL11602 244 16 RRI-SL10902 244 16 RRI-SL21704 263 18 RRI-SL21104 263 18 RRI-SL20705 263 18 RRI-SL31706 263 18 RRI-SL31108 309 18 RRI-SL30710 309 18 RRI-SL30511 309 18 DRAWING B 28 www.yokota.co.uk Order Line: 01909 552471

Angle Grinders Suitable for all grinding, cutting and sanding applications, our range of pneumatic angle grinders are designed for use with a wide range of abrasives from coated abrasive sanding pads to resin bonded cutting / grinding discs & diamond tools. Available from DURO UK. All Red Rooster Automotive & Toku Industrial Angle Grinders offer fully mechanically governed motors to prevent over speeding and to increase safety. In addition they incorporate vibration damping side handles to increase operator comfort along with integral spindle locks for single tool wheel change along with adjustable wheel guards. All tools featured are manufactured to the highest possible industrial standard, using only the highest quality raw materials and most advanced assembly techniques. DRWG D DRWG E

Angle Grinders Angle Models RRG-1040AL AUTOMOTIVE Long reach angle grinder Vibration level 2.5m/s² 4 Angle grinder 14000rpm 377 overall length M6 Spindle 0.7kW power output For cutting applications Silenced exhaust for increased operator comfort List 261 RRG-2034 / RRG-2044 RRG-2055 AUTOMOTIVE Vibration level 2.3/2.4m/s² 4, 4½ & 5 Angle grinder 12000rpm 4 M10 Spindle 4 ½ & 5 M14 Spindle 0.45kW power output Vibration control - vibration dampening side handle For cutting, grinding & sanding applications Silenced exhaust for increased operator comfort VIBRATION CONTROL RRG-2034 List 306 RRG-2044 List 306 RRG-2055 List 306 Type Brand Wheel size RPM Power kw Spindle (Whitworth) Air cons. I/s Weight kg Inletthread Hose diameter Vibration m/s² Noise level db(a) RRG-1040AL RRA 100 x 1.0* x 9.6 14,000 0.76 M6 11.0 1.70 PT 1/4" 10.0 2.5 83 RRG-2034 RRA 100 x 6.0* x 16.0 12,000 0.45 M10 11.0 1.55 PT 1/4" 10.0 2.3 83 RRG-2044 RRA 115 x 6.0* x 22.23 12,000 0.45 M14 x 2 11.0 1.60 PT 1/4" 10.0 2.4 83 RRG-2055 RRA 125 x 6.0* x 22.23 12,000 0.45 M14 x 2 11.0 1.60 PT 1/4" 10.0 2.4 83 * Maximum wheel thickness 30 www.yokota.co.uk Order Line: 01909 552471

Angle Grinders Angle Models TAG-45MLH / TAG-50MLH INDUSTRIAL Vibration level 2.7m/s² 4½" Angle grinder 13,000rpm 5" Angle grinder 12,000rpm M14 Spindle Compact & lightweight design For cutting, grinding & sanding applications Suitable for industrial applications Vibration damping side handle Silenced exhaust for increased operator comfort VIBRATION CONTROL TAG-45MLH List 606 TAG-50MLH List 606 TAG-900QJL INDUSTRIAL Vibration level 3.6m/s² 9" Angle grinder 6,500rpm Compact & lightweight design Two-handed operation For cutting, grinding & sanding applications Suitable for industrial applications Vibration damping side handle Silenced exhaust for increased operator comfort VIBRATION List 686 CONTROL Type Brand Wheel size RPM Power kw Spindle (Whitworth) Air cons. I/s Weight kg Inletthread Hose diameter Vibration m/s² Noise level db(a) TAG-45MLH TOKU 115 x 6.0* x 22.23 13,000 0.67 M14 x 2 10.8 1.80 PT 3/8" 10.0 2.7 83 TAG-50MLH TOKU 125 x 6.0* x 22.23 12,000 0.67 M14 x 2 10.8 1.80 PT 3/8" 10.0 2.7 83 TAG-900QJL TOKU 230 x 6.0* x 22.23 6,500 1.10-16.6 3.10 PT 3/8" 13.0 3.6 82 DIMENSIONS Type A B C D RRG-1040AL 377 42 22 45 RRG-2034 215 95 25 50 RRG-2044 215 95 25 50 RRG-2055 215 95 25 50 TAG-45MLH 267 85 33 50 TAG-50MLH 267 85 33 50 TAG-900 QJL 307 103 36 62 DRAWING E * Maximum wheel thickness Order Line: 01909 552471 www.yokota.co.uk 31

Air Angle Grinders ACCESSORIES Rubber Pads Standard Flanges and Outer Wheel Screws For type Part number Description List TAG-45MLH TAG-50MLH 9310-3008-00-00 Disc 100 x 22.23 19 Rubber pad pictured with TAG series grinder For type Part number Description List TAG-45MLH 42-05-80-H00* Outer flange 27 TAG-50MLH RRG-2034 RRG-2044 61940A 61938A Outer flange Inner flange 14 11 RRG-2055 5D-619240 5D-619239 Outer flange Inner flange 9 8 TAG-900 QJL 2700-040-00* 2700-041-00* Outer flange Outer wheel screw 28 18 * Supplied as standard M14 x 2 Quick Nut For type Part number List TAG-45MLH TAG-50MLH RRG-2044 RRG-2055 QN-M14 39 Tools for mounting grinding wheels Lubricating Oil For type Part number Description List TAG-45MLH 13-40-04-014* Combi spanner 14 x 19 8 TAG-50MLH RRG-2034 RRG-2044 RRG-2055 TAG-45MLH 13-08-02-147* Socket bar 14 TAG-50MLH TAG-900QJL 8081-0022-00-00* Spanner H41 20 TAG-900QJL 9610-1010-00-00* Hex wrench H10 6 * Supplied as standard Protect your tools with our ATLUB Lubricating Oil. ATLUB is a water soluble synthetic lubricant developed specifically for pneumatic tools and is effective down to -25 C. ATLUB can be used in all in-line and Microfog lubricator systems. Protection against wear, corrosion and oxidation Prevents ice particles forming in pneumatic tools and machinery Excellent cleaning properties Excellent protection against deposit in pneumatic systems Fully compatible with synthetic seals and gaskets Part number Description List ATLUB Lubricating oil 18 32 www.yokota.co.uk Order Line: 01909 552471

Die Grinders Suitable for all grinding, finishing and fettling operations. Widely used in foundries, tool and die manufacture, maintenance and repair departments. Suitable for use with a wide variety of abrasive products, from carbide burrs and rotary files to mounted points. All tools featured are manufactured to the highest possible industrial standard, using only the highest quality raw materials and most advanced assembly techniques.

Die Grinders Die Grinders - Short RRG-200RE / RRG-500RE AUTOMOTIVE 6 Chuck Vibration level 2.5m/s² RRG-200ER 162 Overall length RRG-200RE 25,0000 RPM RRG-200RE 0.25kW Power output D E E P D S REGULATOR RRG-500RE 300 Overall length RRG-500RE 20,000 RPM RRG-500RE 0.37 kw Power output RRG-200RE List 93 RRG-500RE List 123 RRG-1000RE LIGHT INDUSTRY High power die grinder Vibration level 2.9m/s² 6 Chuck 200 Overall length 22,0000 RPM 0.74kW Power output List 247 MG-1B INDUSTRIAL Vibration level 1.3m/s² Toku industrial die grinder 6 Chuck 162 Overall length 18,0000 RPM 0.28kW Power output List 311 Type Brand Wheel size RPM Power kw Collet chuck Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RRG-200RE RRA 35.0 25,000 0.25 6.0 4.0 0.56 PT 1/4" 6.50 2.50 83 RRG-500RE RRA 35.0 20,000 0.37 6.0 4.6 0.70 PT 1/4" 6.50 1.68 79 RRG-1000RE RRA 35.0 22,000 0.74 6.0 11.0 1.80 PT 1/4" 10.0 2.90 89 MG-1B TOKU 45.0 18,000 0.28 6.0 8.0 0.55 PT 1/4" 10.0 1.30 77 34 www.yokota.co.uk Order Line: 01909 552471

Die Grinders Die Grinders - Extended & Angle RRG-200REL / RRG-500REL AUTOMOTIVE Extended die grinder Vibration level 2.5m/s² 6 Chuck RRG-200ERL 258 Overall length RRG-200REL 25,0000 RPM RRG-200REL 0.25kW Power output D E E P D S REGULATOR RRG-500REL 350 Overall length RRG-500REL 20,000 RPM RRG-500REL 0.37kW Power Output RRG-200REL List 133 RRG-500REL List 181 RRG-1000REL LIGHT INDUSTRY Extended die grinder High power die grinder 6 Chuck Vibration level 2.9m/s² 330 Overall length 22,0000 RPM 0.74kW Power output List 361 RRG-2090 AUTOMOTIVE Angle head die grinder Vibration level 2.4m/s² 6 Chuck 162 Overall length 20,0000 RPM 0.23kW Power output D D E E P S REGULATOR List 127 Type Brand Wheel size RPM Power kw Collet chuck Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RRG-200REL RRA 35.0 25,000 0.25 6.0 4.0 0.86 PT 1/4" 6.5 1.50 83 RRG-500REL RRA 35.0 20,000 0.37 6.0 4.6 1.40 PT 1/4" 6.5 1.68 79 RRG-1000REL RRA 35.0 22,000 0.74 6.0 11.0 2.60 PT 1/4" 10.0 2.90 89 RRG-2090 RRA 35.0 20,000 0.23 6.0 4.0 0.56 PT 1/4" 6.5 2.40 84 Order Line: 01909 552471 www.yokota.co.uk 35

Die Needle Grinders Scalers Technical Data DIMENSIONS Type A B C D E Drawing RRG-200RE 162 40 18 30 34 A RRG-500RE 190 45 22 30 - A RRG-1000RE 200 46 21 41 50 A MG-1B 162 43 19 46 48 A RRG-200REL 258 40 18 116 135 A RRG-500REL 350 45 22 180 190 A RRG-1000REL 330 46 21 171 50 A RRG-2090 167 75-42 - C DRAWING A D A DRAWING C B 36 www.yokota.co.uk Order Line: 01909 552471

Sanders Red Rooster Industrial & Automotive belt, random orbital & mini detail sanders for all sanding, finishing & detail finishing applications. All Red Rooster Industrial models feature a rubber grip or composite body, with both ranges having integrated silencers designed to increase operator comfort. The compact mini sander is supplied with a selection of Roloc abrasive discs. All tools featured are manufactured to the highest possible industrial standard, using only the highest quality raw materials and most advanced assembly techniques.

Sanders Belt Sanders RRG-3611K RRG-3611 RRG-3621 LIGHT INDUSTRY LIGHT INDUSTRY LIGHT INDUSTRY Includes both 6 & 10 arms Vibration level 0.6m/s² 6/10x330 Belt size 20,0000 RPM 0.28kW Power output Rubber protection grip for greater operator comfort 10x330 Belt size Vibration level 0.6m/s² 20,0000 RPM 0.28kW Power output Rubber protection grip for greater operator comfort 20x520 Belt size Vibration level 0.6m/s² 18,0000 RPM 0.34kW Power output Rubber protection grip for greater operator comfort List 395 List 337 List 495 RRG-3630 LIGHT INDUSTRY 30x540 Belt size Vibration level 0.6m/s² 12,0000 RPM 0.52kW Power output Rubber protection grip for greater operator comfort List 668 Type Brand Belt size RPM Power kw Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RRG-3611K RRI 6/10 x 330 20,000 0.28 6.7 0.75 PT 1/4" 10.0 0.6 80 RRG-3611 RRI 10 x 330 20,000 0.28 6.7 0.75 PT 1/4" 10.0 0.6 80 RRG-3621 RRI 20 x 520 18,000 0.34 8.7 1.40 PT 1/4" 10.0 2.5 79 RRG-3630 RRI 30 x 540 12,000 0.52 10.3 2.20 PT 1/4" 10.0 2.0 79 38 www.yokota.co.uk Order Line: 01909 552471

Sanders Orbital Sanders D E E D P S D D E E P S D D E E P S REGULATOR REGULATOR REGULATOR RRI-6150-5NV LIGHT INDUSTRY No dust extraction 6 Random orbital sander 5 Random orbit pattern 12,000 RPM 5/16UNF Spindle Vibration level less than 2.5m/s² Lightweight at 0.7kg RRI-6150-5SV LIGHT INDUSTRY Self vacuum for dust extraction 6 Random orbital sander 5 Random orbit pattern 12,000 RPM 5/16UNF Spindle Vibration level less than 2.5m/s² Lightweight at 0.7kg RRI-6150-5CV LIGHT INDUSTRY Central vacuum for connection to factory installed dust extraction 6 Random orbital sander 5 Random orbit pattern 12,000 RPM 5/16UNF Spindle Vibration level less than 2.5m/s² Lightweight at 0.7kg List 365 List 404 List 424 Type Brand Pad size Stroke RPM Power * kw Spindle Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RRI-6150-5NV RRI 150.0 5.0 12,000 0.3 5/16" UNF 4.9 0.6 PT 1/4" 6.5 <2.5 73 RRI-6150-5SV RRI 150.0 5.0 12,000 0.3 5/16" UNF 4.9 0.7 PT 1/4" 6.5 <2.5 73 RRI-6150-5CV RRI 150.0 5.0 12,000 0.3 5/16" UNF 4.9 0.7 PT 1/4" 6.5 <2.5 73 Order Line: 01909 552471 www.yokota.co.uk 39

Sanders Detail Sanders RRS-60152K AUTOMOTIVE 50 Mini detail sanding kit Roloc Spindle Kits contains: 1 x RRS-60152K 10x 80 Grit sanding discs 10x 100 Grit sanding discs 10x 120 Grit sanding discs 1 x Blow moulded vinyl case 15,000 RPM Vibration level 0.74m/s² RRS-60153K AUTOMOTIVE 75 Mini detail sanding kit Roloc Spindle Kits contains: 1 x RRS-60153K 10x 80 Grit sanding discs 10x 100 Grit sanding discs 10x 120 Grit sanding discs 1 x Blow moulded vinyl case 15,000 RPM Vibration level 0.74m/s² List 218 List 218 Type Brand Pad size RPM Power kw Air cons l/sec Weight kg Inletthread Hose diameter Vibration m/s² Noise level db(a) RRS-60152K RRA 50.0 1,500 0.3 4.9 0.54 PT 1/4" 10.0. 0.74 80 RRS-60153K RRA 75.0 1,500 0.3 4.9 0.54 PT 1/4" 10.0 0.74 80 DIMENSIONS Type A B C D RRG-3611K 50 265 - - RRG-3611 50 265 RRG-3621 60 420 - - RRG-3630 60 490 - - RRI-6150-5NV 163 104 - - RRI-6150-5SV 213 104 - - RRI-6150-5CV 213 104 - - RRS-60152K 116 140 - - RRS-60153K 116 140 - - 40 www.yokota.co.uk Order Line: 01909 552471

Needle Scalers Red Rooster Automotive & Industrial Needle Scalers are available in both 19 and 28 needle variants. Our Red Rooster Automotive range includes both straight & pistol case models, with the Red Rooster Industrial range offering heavy duty vibration controlled models with a full range of optional accessories along with tool-less needle replacement & the Trelawny 110v Electric needle scaler & accessory range completes the industrial line up. All tools are suitable for use in a large variety of surface preparation applications such as rust, paint & scale removal, concrete removal from plant and machinery along with preparing and keying surfaces for concrete laying. Full service kits, replacement needles and dust extraction shrouds are all available.

Needle Scalers Straight & Pistol Models RR-0315NS AUTOMOTIVE Suitable for surface preparation, rust & paint removal 19 needles Inline case Good ergonomics, well balanced List 338 RR-2110NS AUTOMOTIVE Suitable for surface preparation, rust & paint removal 19 Needles Pistol case Good ergonomics, well balanced Rubber handgrip for temperature isolation List 246 Type Brand Bore diameter Stroke Blows p/min Air cons. I/s Weight kg Inletthread Hose diameter Vibration m/s² Noise level db(a) RR-0315NS RRA 25.0 32.0 4,000 6.6 2.6 PT 1/4" 6.5 9.4 93 RR-2110NS RRA 23.5 33.0 3,000 6.6 2.5 PT 1/4" 6.5 20.0 96 42 www.yokota.co.uk Order Line: 01909 552471

Needle Scalers Air & Electric Pistol Models RRI-4006VL / RRI-4007VL VIBRATION CONTROL INDUSTRIAL Air powered needle scaler suitable for surface preparation and rust, paint, scale & concrete removal Good ergonomics & well balanced Isolated floating cylinder design for reduced vibration & greater operator comfort Tool-less needle replacement Low air consumption 38 dust extraction shroud available Rubber handgrip for temperature isolation RRI-4006VL List 607 RRI-4007VL List 645 VL219E VIBRATION CONTROL INDUSTRIAL Electric needle scaler suitable for removal of coatings, corrosion & other accumulated materials, slag removal & stress relieving welds Suitable for cleaning concrete prior to repair, mixers, formwork & machinery Powerful 650w (110v) motor Lightweight & slim line for easy operation Vibration control Magnesium alloy gearbox housing for reduced weight & strength Autostop brushes protect the armature VL219E List 960 Type Brand Bore diameter Power V - W - Hz Stroke Blows p/min Air cons. I/s Weight kg Inletthread Hose diameter Vibration m/s² Noise level db(a) RRI-4006VL RRI 23.5-34.0 2,400 1.9 2.7 PT 1/4" 6.5 2.7 90 RRI-4007VL RRI 34.4-30.5 3,000 2.6 3.4 PT 1/4" 6.5 1.9 95 VL219E-NEEDLE-110v TRELAWNY - 650-110-50 20.0 3,000-3.7 - - 9.8 90 TECHNICAL DATA Type A B RR-0315NS 415 45 RR-2110NS 340 175 RRI-4006VL 340 48 RRI-4007VL 330 48 VL219E 520 210 Order Line: 01909 552471 www.yokota.co.uk 43

Needle Scalers Accessories - RRI-400VL & 4007VL ACCESSORIES Dust Extraction Shroud Service Kit For type Part number Description List RRI-4006VL RRI-4006 VL-DS Dust extraction shroud 122 RRI-4007VL RRI-4007 VL-DS Dust extraction shroud 122 For type Part number Description List RRI-4006 VL RRI-4006 VL-SKIT Service Kit 156 RRI-4007 VL RRI-4007 VL-SKIT Service Kit 156 Spare Needle Sets RRI-4006 VL: 19 needles RRI-4007 VL: 28 needles For type Part number Description List RRI-4006 VL RRI-4006 VL-6X19-3 Chisel Tip needle 93 RR-0315NS RR-2110NS NEEDLES 6 cartons of 19 RRI-4006 VL RR-0315NS RR-2110NS RRI-4007 VL RRI-4007 VL RRI-4006 VL-1X19- NEEDLES RRI-4007 VL-6X28- NEEDLES RRI-4007 VL-1X28- NEEDLES 3 Chisel Tip needle 1 carton of 19 3 Chisel Tip needle 6 cartons of 28 3 Chisel Tip needle 1 carton of 28 18 132 25 Accessories - VL219E ACCESSORIES Chisel Kit Chisels For type Part number Description List VL219E 419.6610 Chisel Kit 98 For type Part number Description List VL219E 704.3101 19x178 22 VL219E 704.3103 64x178 34 Box of 19 Needles Flat Tip - length 127 (5") Dust Extraction Shroud For type Part number Description List VL219E 443.1115 Box of 19 Needles 13 For type Part number Description List VL219E 418.6100 Vacuum Shroud 91 44 www.yokota.co.uk Order Line: 01909 552471

Drills Our Red Rooster Automotive, Industrial & Toku drill range offers 10-16 drilling capacity across 6 models. Composite bodies feature throughout the Red Rooster Automotive range that also includes a 90 angle head on the Toku MD-3312B. The Red Rooster Industrial RRI2216P completes the line up with a 16 drilling capacity, rear exhaust & ½Kw power output. All tools featured are manufactured to the highest possible industrial standard, using only the highest quality raw materials and most advanced assembly techniques.

Drills Drills - Pistol RR-10DP AUTOMOTIVE 10 Drilling capacity 3/8 x 24 UNF Keyless chuck Reversible 1,800 RPM Composite body List 156 RR-13DP AUTOMOTIVE 13 Drilling capacity 3/8 x 24 UNF Keyless chuck Reversible 800 RPM Composite body List 212 RRI-2116P INDUSTRIAL 16 Drilling capacity ½ x 20 UNF chuck 950 RPM Integral speed regulator Rear silenced exhaust D E D E P S REGULATOR List 1,376 Type Brand Capacity steel Spindle size Rotation direction RPM Power kw Air cons. l/s Weight kg Inletthread Hosediameter m/s² Vibration Noise level db(a) RR-10DP RRA 10.0 3/8" x 24 UNF L/R 1,800 0.35 8.0 1.1 PT 1/4" 10.0 4.0 83 RR-13DP RRA 13.0 3/8" x 24 UNF L/R 800 0.35 8.0 1.3 PT 1/4" 10.0 4.0 83 RRI-2116P RRI 16.0 1/2" x 20 UNF R 950 (1) 0.50 11.0 2.4 PT 1/4" 10.0 1.8 82 (1) Min. 650 p/min - Max. 950 p/min 46 www.yokota.co.uk Order Line: 01909 552471

Drills Drills - Straight & Angle 10RDS-2500 AUTOMOTIVE D E E P D S REGULATOR 2,500 RPM 10 Drilling capacity 3/8 x 24 UNF Keyless chuck Integral speed regulator Composite body List 155 10RDS-4000 INDUSTRIAL 4,000 RPM 10 Drilling capacity 3/8 x 24 UNF chuck Integral speed regulator Composite body D E E P D S REGULATOR List 171 MD-3312B INDUSTRIAL 90 Angle head 10 Drilling capacity 3/8 x 24 UNF chuck Reversible 1,900 RPM List 368 Type Brand Capacity steel Spindle size Rotation direction RPM Power kw Air cons. l/s Weight kg Inletthread Hosediameter m/s² Vibration Noise level db(a) 10RDS-2500 RRA 10.0 3/8" x 24 UNF R 2,500 0.37 3.5 1.10 PT 1/4" 6.5 0.4 79 10RDS-4000 RRA 10.0 3/8" x 24 UNF R 4,000 0.37 3.5 1.10 PT 1/4" 6.5 0.4 79 MD-3312B TOKU 10.0 3/8" x 24 UNF L/R 1,900 0.38 6.0 0.91 PT 1/4" 6.5 2.3 77 Order Line: 01909 552471 www.yokota.co.uk 47

Drills Technical Data & Accessories DIMENSIONS Type A B RR-10DP 185 165 - RR-13DP 218 165-10RDS-2500 250-22 10RDS-4000 250-25 MD-3312B 205 93 20 RRI-2116P 270 168 28 C 48 www.yokota.co.uk Order Line: 01909 552471

Haers The Red Rooster & Toku haer ranges offer tools for all applications, from delicate & detailed stone masonry & building tasks through to higher powered 5-8kg lightweight haers suited to foundry, rebar work, smaller demolition and civil engineering applications. Red Rooster Automotive offers pistol & straight case tools, with Red Rooster Industrial bringing an open grip, vibration controlled tool with a low 3.5m/s² vibration level. Lightweight chipping haers from Toku feature a D-grip or open grip handle for ease of use and all tools are perfectly suited to close work in confined spaces where greater manoeuvrability is required. Lighter and more powerful than other types of haers, pneumatic haers can be used in almost all environments where other tools simply cannot be safely operated. All tools featured are manufactured to the highest possible standard, using only the highest quality raw materials and most advanced assembly techniques.

Haers Chipping Haers RRH-2000 AUTOMOTIVE 11 x 12.7 x 40 Hex shank 1.5Kg Haer Lightweight Up to 2,800 Blows per minute 4.5 Joules per blow List 144 RRH-4210 / RRH-4210K AUTOMOTIVE RRR-4210K 10.5 x 12.5 x 50 Hex shank RRR-4210 10.2 x 40 Round shank 1.5Kg Haer Lightweight 6.7 Joules per blow RRH-4210 List 246 RRH-4210K List 246 RRH-4210KSET / RRH-4210KSET 1x RRH-4210 or RRH-4210K 1x Flat chisel 1x Wide chisel 1x Moil point 1x Muffler cutter 1x Blow moulded vinyl case RRH-4210SET List 287 RRH-4210KSET List 287 Type Brand Shank size Bore diameter Stroke Blows p/min J/Blow Air cons. I/s Weight kg Inletthread Hose diameter Vibration m/s² Noise level db(a) RRH-2000 RRA 11.0 x 12.7 x 40.0 17.4 42.0 5,000 4.5 8.4 1.5 PT 1/4" 10.0 8.0 88 RRH-4210 RRA 10.2 x 40.0 19.0 50.0 3,500 6.7 4.0 1.5 PT 1/4" 6.5 8.0 90 RRH-4210K RRA 10.5 x 12.5 x 50.0 19.0 50.0 3,500 6.7 4.0 1.5 PT 1/4" 6.5 8.0 90 50 www.yokota.co.uk Order Line: 01909 552471

Haers Chipping Haers RR-0315 AUTOMOTIVE 12.3 x 16 x 28 Square shank 2.6Kg Haer Lightweight Up to 4,000 Blows per minute 4.5 Joules per blow List 233 RRI-4021/4 VIBRATION CONTROL LIGHT INDUSTRY Vibration control 3.5m/s² vibration level 2.2 Kg Haer Fitted with a solid steel screw-retainer. Chisel retainer enables the use of both pointed & wide cutting Lightweight 11 x 12.7 x 40 Hex shank Up to 4,500 Blows per minute 3.5 Joules per blow List 434 Type Brand Shank size Bore diameter Stroke Blows p/min J/Blow Air cons. I/s Weight kg Inletthread Hose diameter Vibration m/s² Noise level db(a) RR-0315 RRA 12.3 x 16.0 x 28.0 25.0 32.0 4,000 7.4 3.0 2.6 PT 1/4" 6.5 9.4 93 RRI-4021/4 RRI 11.0 x 12.7 x 40.0 18.0 30.0 4,500 3.5 10.0 2.2 PT 1/4" 10.0 3.5 88 Order Line: 01909 552471 www.yokota.co.uk 51

Haers Lightweight Haers AA-1.3BRH INDUSTRIAL 5kg Chipping haer 19 x 50 Hex shank Compact & lightweight User friendly in confined spaces D-Grip handle for greater manoeuvrability Suitable for both foundry & rebar work Suitable for concrete removal on machinery Fitted with solid steel screw retainer for use with pointed and wide cutting chisels THA-2BRH / THA-4BRH List 804 INDUSTRIAL 7kg Chipping haer (THA-2BRH) 8kg Chipping haer (THA-4BRH) 19 x 50 Hex shank Open grip handle for ease of use Ideal for both foundry & rebar work Fitted with solid steel screw retainer for use with pointed and wide cutting chisels THA-2BRH List 859 THA-4BRH List 904 Type Brand Shank size Bore diameter Stroke Blows p/min J/Blow Air cons. I/s Weight kg Inlet thread Hose diameter Vibration m/s² Noise level db(a) AA-1.3BRH TOKU 19.0 x 50.0 24.0 58.0 2,800 12.7 7.5 4.5 PT 3/8" 10.0 10.0 93 THA-2BRH TOKU 19.0 x 50.0 28.5 51.0 2,300 15.7 14.2 6.8 PT 3/8" 13.0 11.6 93 THA-4BRH TOKU 19.0 x 50.0 28.5 102.0 1,800 31.8 15.8 7.8 PT 3/8" 13.0 11.6 93 TECHNICAL DATA Type A B RRH-2000 165 140 RRH-4210 217 131 RRH-4210K 217 131 RR-0315 320 43 RRI-4021/4 255 100 AA-1.3BR(H) 300 76 THA-2BRH19x50 350 87 THA-4BRH19x50 430 87 52 www.yokota.co.uk Order Line: 01909 552471

Chisels A range of high quality chisels for use with pneumatic haers. Perfectly suited to breaking a wide range of building materials in addition to many automotive & workshop applications. The range includes moil points, wide chisels, sheet metal cutters & shears, bushing splitters, spot weld breakers & punches. Manufactured using the most advanced systems available and the very latest in heat treatment methods guaranteeing the same high quality across the range. Order Line: 01909 552471 www.yokota.co.uk 53

Chisels Chisels Shank size Ø 10,2 x 40 Shank size 10,5 Hex x Ø 12,5 x 50 10,2 FOR HAMMERS: RED ROOSTER RRH-4210 FOR HAMMERS: RED ROOSTER RRH-4210K 40 Part number Description L () total B () Price BE101002 Cutting chisel 122 20 13.66 BE101003 Sheet metal trier 135 16 13.66 BE101004 Panel cutter 131 15 13.66 BE101005 Muffler cutter 115 15 13.66 BE101006 Bushing splitter 132 12 13.66 BE101007 Spot-weld breaker bent 79 15 13.66 BE101008 Bushing driver 63-13.66 BE101009 Tapered punch 132 Ø 3 13.66 BE101010 Flat chisel 120 33 13.66 BE101011 Double edged cutter 110 22 13.66 BE101012 Shear bent 132 12 13.66 BE101015 Wide cutting bent 130 33 13.66 BE101016 Straight punch 120 Ø 12 13.66 BE101017 Spot-weld breaker 117 19 13.66 BE101018 Scraper 137 33 13.66 BE101019 Tail pipe cutter 119 29 13.66 BE101020 Concave scraping 130 34 13.66 BE101021 Wide cutting 129 44 13.66 BE101022 Diamond point 161-13.66 BE101024 Flat, bent 106 15 13.66 BE101025 River cutter 109 23 13.66 BE101027 Center punch chisel 106 Ø 9 13.66 BE101028 Pin punch 134 Ø 8 13.66 Shank size 11 Hex / Ø 12,7 x 40 FOR HAMMERS: RED ROOSTER RRH-2000 RED ROOSTER RRI-4021/4 Order number Description L () total B () Price BE151002 Cutting chisel 122 20 13.66 BE151003 Sheet metal trier 135 16 13.66 BE151004 Panel cutter 131 15 13.66 BE151005 Muffler cutter 115 15 13.66 BE151007 Spot-weld breaker bent 79 15 13.66 BE151008 Bushing driver 63 Ø 23 13.66 BE151009 Tapered punch 132 Ø 3 13.66 BE151010 Flat chisel 120 33 13.66 BE151011 Double edged cutter 110 22 13.66 BE151012 Shear bent 132 12 13.66 BE151014 Double blade panel cutter 136 18 13.66 BE151015 Wide cutting, bent 130 33 13.66 BE151016 Straight punch 120 Ø 12 13.66 BE151017 Spot-weld breaker 117 19 13.66 BE151018 Scraper 137 33 13.66 BE151019 Tail pipe cutter 119 29 13.66 BE151020 Concave scraping 130 34 13.66 BE151021 Wide cutting 129 44 13.66 BE151022 Diamond point 161-13.66 BE151024 Flat, bent 106 15 13.66 BE151025 Rivet cutter 109 23 13.66 BE151026 Round nose panel cutter 90 21 13.66 BE151027 Center punch chisel 106 Ø 9 13.66 BE151028 Pin punch 134 Ø 8 13.66 BE151031 Hollow gouge 155 17 14.37 Shank size 12,7 square, with recess FOR HAMMERS: RED ROOSTER RR-0315 Part number Description L () total B () Price CB51109165 Flat chisel 165 18 13.66 CB51112180 Wide flat chisel 180 33 13.66 CB51104190 Wide flat chisel 190 33 13.66 CB51103185 Wide flat chisel 185 45 13.66 CB51115180 Moil point 180-13.66 Order number Description L () total B () Price BE15/1B Flat, bent 113 19 13.66 BE15/1F Flat chisel 114 19 13.66 BE15/1G Wide flat chisel, bent 113 35 13.66 BE15/1W Wide flat chisel 118 35 13.66 AA1.3 / THA2 / THA4 Part no. Description Price Y-19.0x50HX-MP250 Moil point - 250 under collar 14.68 Y-19.0x50HX-NC250 Narrow chisel - 250 under collar 14.68 Y-19.0x50HX-60WC230 60 Wide chisel - 230 under collar 22.50 54 www.yokota.co.uk Order Line: 01909 552471

Saws The Red Rooster compact saw range covers cutting applications up to 10 in steel & 12 in aluminium. Both reciprocating saws are lightweight, have low vibration & are supplied with a swivel joint for increased flexibility when in use. Supplied in a blown moulded case with a selection of blades. The RRJ pneumatic saws are lighter and more powerful than other types of cutting tools available and are suitable for use in areas where electric or petrol saws cannot be safely operated.

Saws Reciprocating Saw RRJ-8205 AUTOMOTIVE VIBRATION CONTROL Max steel cutting capacity 10 Max aluminium cutting capacity 12 Suitable for light & heavy cutting applications Low vibration Plastic layer over housing offering good thermal isolation Safety lever start Handgrip in isolating rubber cover Up to 5,000 strokes per minute Supplied in blow moulded case complete with blades and universal air inlet joint Complete with universal swivel joint for greater manoeuvrability List 339 RRJ-8210 AUTOMOTIVE VIBRATION CONTROL Max steel cutting capacity 3.1 Max aluminium cutting capacity 3.9 Suitable for light & heavy cutting applications Low vibration Composite housing offering good thermal isolation Safety lever start Handgrip in isolating rubber cover Up to 9,500 Strokes per minute Supplied in blow moulded case complete with blades and universal air inlet joint List 342 Type Brand Capacity steel Capacity aluminium Strokes min Stroke Power KW Air cons. I/s Weight kg Inlet thread Hose diameter Vibration m/s² Noise level db(a) RRJ-8205 RRA 10.0 12.0 5,000 25.0 0.25 2.8 0.96 PT 1/4" 6.5 3.5 79 RRJ-8210 RRA 3.10 3.90 9,500 10.0 0.25 2.8 0.51 PT 1/4" 6.5 3.5 78 ACCESSORIES For RRI-8205 Description Part number Tpi List 5-pack 8205-524-00 24 teeth/inch 36 sawblades 5-pack sawblades 8205-518-00 18 teeth/inch 36 56 www.yokota.co.uk Order Line: 01909 552471

Riveters The Red Rooster Industrial pneumatic hydraulic riveters are suitable for pop rivets from 2.4-6.4 Ø. Both tools are lightweight and have low air consumption & low vibration. All tools featured are manufactured to the highest possible industrial standard, using only the highest quality raw materials and most advanced assembly techniques.

Riveters Riveters RRI-4010 RRI-4011 INDUSTRIAL INDUSTRIAL 4.8 Ø maximum capacity Lightweight at 1.5Kg 1.5m/s² vibration level Supplied with 3.2, 4.0 & 4.8 nose pieces Mandrill collection pot & adjustment wrench included List 265 6.4 Ø maximum capacity Lightweight at 2.0Kg 0.4m/s² vibration Level Supplied with 2.4, 3.2, 4.0, 4.8 & 6.4 nose pieces Mandrill collection bag, mandrill deflector & adjustment wrench included List 667 Type Brand Traction kg Capacity rivets diameter nn Air cons. l/s Weight kg Inletthread Hosediameter Vibration m/s² Noise level db(a) RRI-4010 RRI 900 4.8 1.15 1.5 PT 1/4" 6.0 1.5 76 RRI-4011 RRI 1,045 6.4 1.80 2.0 PT 1/4" 6.0 0.4 76 DIMENSIONS Type A B RRI-4010 159 299 RRI-4011 198 315 58 www.yokota.co.uk Order Line: 01909 552471

Various Tools Our prograe is completed with a range of accessories. In this section you will find: Engraving Pen Caulking Gun Blows Guns Hoses Combi-Kit Lubricating Oil

Various Tools & Hoses Engraving Pen RRI-9010 LIGHT INDUSTRY Tungsten carbide tip Suitable for steel, bronze, alloys, copper and stainless steel Available with fine, medium or coarse needles (medium size delivered as standard) List 313 Type Brand Needle diameter Strokes p/min Air cons. l/sec Weight kg Inletthread Hose diameter Vibration m/s² Noise level db(a) RRI-9010 RRI 1.7 36,000 0.5 0.25 R 1/4" 4.0 0.7 62 Caulking Gun RRP-203 AUTOMOTIVE For quick application of caulks, sealants & adhesives Suitable for 50 x 215 caulk cartages 30-60 psi working air pressure List 39 Type Brand Tube Ø x Working Pressure bar Air cons. l/sec Weight kg Inletthread Hose diameter RRP-203 RRA 50 x 215 2-4 - 1.1 PT 1/4" 6.5 Blow Gun RRI-21930 AUTOMOTIVE Two tools available Suitable for basic applications List 19 Type Brand Air cons. l/sec Weight kg Inletthread Hose diameter RRI-21930 RRI 5.0 0.2 PT 1/4" 6.5 60 www.yokota.co.uk Order Line: 01909 552471

Warranty Various Repair & Tools Service & Repair & Hoses Hoses, Combi-Kit & Lubricating Oil ACCESSORIES Hoses Features Flexible no kink hose Maximum working pressure 8 bar Working temperature range -20 C - +60 C 360 rotating threaded connector at each end Straight 10 & 50cm tails Oil & petrol resistant Part number Description Inlet- List thread PT-02510SJ Spiral Air hoses PU 6.5X10 L=2-5m PT 1/4" 28 PT-02525SJ Spiral Air hoses PU 6.5X10 L=5m PT 1/4" 31 PT-02550SJ Spiral Air hoses PU 6.5X10 L=10m PT 1/4" 45 PT-03525SJ Spiral Air hoses PU 8X12 L=5m PT 1/4" 42 PT-03550SJ Spiral Air hoses PU 8X12 L=10m PT 1/4" 70 PT-04525SJ Spiral Air hoses PU 9.5X13.5 L=5m PT 3/8" 70 PT-04550SJ Spiral Air hoses PU 9.5X13.5 L=10m PT 3/8" 100 Combi-Kit Lubricating Oil Protect your tools with our Combi-Kit carrier. Fitted with our high quality ¾" SMC Filter, Regulator and Lubricator kit (AC40-F06E3/4). This will ensure your tools are supplied with clean, lubricated air at the correct air pressure. Protect your tools with our ATLUB Lubricating Oil. ATLUB is a water soluble synthetic lubricant developed specifically for pneumatic tools and is effective down to -25 C. ATLUB can be used in all in-line and Microfog lubricator systems. Protection against wear, corrosion and oxidation Prevents ice particles forming in pneumatic tools and machinery Excellent cleaning properties Excellent protection against deposit in pneumatic systems Fully compatible with synthetic seals and gaskets Part number Description List KIT-100-KIT Combi-kit 425 (with AC40-F06E3/4) (40.5 x 25.5 x 32cm) Part number Description List ATLUB Lubricating oil 18 Order Line: 01909 552471 www.yokota.co.uk 61

ELV & EAV Chart ELV - Daily Exposure Limit Value EAV - Daily Exposure Action Value Yokota Construction & Surface Preparation Range ELV & EAV Chart Product Code Time to reach ELV (hours:minutes) Time to reach EAV (hours:minutes) Time (hours:minutes) - ELV EAV 5:00 10:00 15:00 20:00 25:00 RR-16N 3/8 9.26 2.22 RR-160H 1.25 0.25 RR-16N 1/2 9.26 2.22 RR-16N T 1/2 9.26 2.22 RR-18N 8.41 2.10 RR-18N T 20.49 5.12 MI-17HEG 3.39 0.55 MI-20P 9.26 2.22 RR-24N 8.41 2.10 RR-24N 1 8.41 2.10 RR-27P 2.38 0.39 MI-3800PR 3.08 0.47 MI-3800ESR 3.08 0.47 RR-36E 2.35 0.39 RRI-37E 0.42 0.1 MI-3800ELR 3.08 0.47 RRI Impulse Range 24.00 8.00 RR-02SC 24.00 19.32 RR-06SC 24.00 19.32 RR-02SP 24.00 19.32 RR-06SP 16.20 4.05 RR-0800DD 16.20 4.05 RR-1800DD 16.20 4.05 RRI Screwdriver Range 24.00 8.41 RRG-1040AL 24.00 8.00 RRG-2034 24.00 8.41 RRG-2044 24.00 8.41 RRG-2055 24.00 8.41 TAG-45MLH 24.00 6.42 TAG-50MLH 24.00 6.42 TAG-900QJL 15.26 3.51 RRG-200RE 24.00 8.00 RRG-500RE 24.00 17.43 RRG-1000RE 23.47 5.56 MG-1B 24.00 24.00 RRG-200REL 24.00 22.13 RRG-500REL 24.00 17.43 RRG-1000REL 23.47 5.57 RRG-2090 24.00 8.41 RRG-3617K 24.00 24.00 RRG-3611 24.00 24.00 RRG-3621 24.00 8.00 RRG-3630 24.00 12.3 RRI-6150-5SV 24.00 8.00 RRI-6150-5NV 24.00 8.00 RRI-6150-5CV 24.00 8.00 RRS-60152K 24.00 24.00 RRS-60153K 24.00 24.00 62 www.yokota.co.uk Order Line: 01909 552471

Warranty ELV & EAV Chart (Continued) ELV - Daily Exposure Limit Value EAV - Daily Exposure Action Value Yokota Construction & Surface Preparation Range ELV & EAV Chart Product Code Time to reach ELV (hours:minutes) Time to reach EAV (hours:minutes) Time (hours:minutes) - ELV EAV 5:00 10:00 15:00 20:00 25:00 RR-0315NS 2.16 0.34 RR-2110NS 0.30 0.08 RRI-4006VL 24.00 6.52 RRI-4007VL 24.00 13.51 VL-219E 2.05 0.31 RR-10DP 12.30 3.08 RR-13DP 12.30 3.08 10RDS-2500 24.00 24.00 10RDS-4000 24.00 24.00 MD-3312B 24.00 9.27 RRI-2116P 24.00 15.26 RRH-2000 3.08 0.47 RRH-4210 3.08 0.47 RRH-4210K 3.08 0.47 RR-0315 2.16 0.34 RRI-4021/4 16.20 4.05 AA-1.3BRH 2.00 0.30 THA-2BRH 1.29 0.22 THA-4BRH 1.29 0.22 RRJ-8205 16.20 4.05 RRJ-8210 16.20 4.05 RRI-4010 24.00 22.13 RRI-4011 24.00 24.00 RRI-9010 24.00 24.00 Order Line: 01909 552471 www.yokota.co.uk 63

Warranty Repair & Service & Repair From the Yokota UK service centre at our Sheffield head office we are able to offer you full service, repair & preventative maintenance. Our fully equipped air tool test & service area allows us to fully access & repair any pneumatic tool, rectifying any faults. Our highly skilled technicians are on hand to repair and refurbish tools from any manufacturer in close working relationships with our client's service & production departments to ensure zero down time. We offer full & detailed quotations for any type of air tool, along with preventative maintenance schedules and advice on the correct plan of action in prolonging the service life of your tools. From heavy construction tools through to hi-capability tightening systems, we breathe new life into any tool. Free no obligation quotations 3 month comprehensive warranty on all work carried out Fully traceable repair history through our quality management systems Only OEM spare parts used Complete maintenance advice service 64 www.yokota.co.uk Order Line: 01909 552471

Warranty Our warranty covers all material defects and/ or construction faults of the manufacturer. The replacement of parts or repair must be undertaken by an official Toku/Red Rooster service centre and is free of charge when the tool is covered by warranty. Carriage or postage is the responsibility of the account holder/ customer. Damage attributed to normal wear and tear, overloading or incorrect use is excluded from warranty. Replacement tools or claims for loss of production as a consequence of a warranty claim is not included in the warranty agreement. Repairs under warranty can only be considered, when the tool is in its original state and it is accompanied by the purchase invoice. Warranty claims have to be made through the distributor, who has supplied the tool concerned. We reserve the right to make specification changes to our products without prior notification. Warranty conditions are based on an 8 hour working day. The warranty period from the date of purchase is as follows: 12 months: Red Rooster, Trelawny & Toku industrial airtools & machines 3 months: On repairs and replaced spare parts, which are repaired by our official service workshops. Order Line: 01909 552471 www.yokota.co.uk 65