DIESEL DIESEL PARTS & SERVICE www.dieselparts.com.au
HATZ DIESEL ENGINE RANGE The B-Series Flexible solution for all areas The Hatz B series scores high marks in mobile and stationary operation with compact installation dimensions and in all applications with a power requirement up to 8 kw due to its low weight. Also in regard to robustness and lifetime, the series sets standards in the market. Whether on vibration plates or in the inhospitable environment of the Antarctic, the B- series has been tried and tested a hundred thousand times in harsh surroundings. D-Series Revolutionary technology in single cylinder The Hatz D series is best suited for challenging tasks. It is characterized by high power and the unique design in particular. Thus, with 11.2 kw, the 1D90 engine is the highest performance single-cylinder diesel engine in the world. A compensation weight on the flywheel side crank arm as well as balance weights cast in the flywheel ensure the special quiet running of the D series. Optionally available counter-rotating balance shafts even ensure 100% 1st-order counter balance G-Series The two cylinder power package As our customers confirm, Hatz diesel engines are the most robust and durable in this market segment. It doesn't matter where they are used; whether at very low temperatures or in a tropical climate, the Hatz 2G40 carries out its job reliably. With regular maintenance, many thousands of hours are commonplace, using HATZ original spare parts, of course. M-Series Ready to use all the time The M-Series is the mainstay among industrial diesel engines. The 2, 3 and 4-cylinder engines have been successfully established on the market for around 30 years and they are still regarded as unbeatable. The robust basic drive train, notably the sturdiest crankshaft of all engines on the market, has remained unchanged since the market introduction. Thus running times of several ten thousand hours are no problem for the M-Series engines L-Series Economic, operationally safe, quiet Hatz L-Series Silent Pack Industrial s are available in 2,3 and 4-cylinder configuration with German Designed, Engineered and Factory fitted Engine encapsulation reducing radiated noise emission by 90%. The capsule consists of sheet metal with structure-borne sound insulation that is mounted on the engine. All control and service points are accessible without removing any covers. Hatz Silent Pack Engines - like all other Hatz engines offer extremely long service life is attributed to the robust design. The cooling air circulation and high operation safety enable L-Series engines to be operated reliably in remote areas or for applications without constant monitoring. H-Series Since beginning of 2014 a new engine family extends the Hatz product portfolio: The H-series. Starting with the 4H50TIC water-cooled 4-cylinder model, Hatz is relying on common-rail technology and turbocharger with the new generation. Hatz followed a ground-breaking downsizing approach, making the engine the most compact and lightweight in its class. The H series does not require a diesel particulate filter ( DPF) in order to fulfil the stringent emissions regulation Stage III B in the EU and EPA Tier 4 final in the US. For more information on the Hatz engine range go to our web site on www.dieslparts.com.au or contact us on 07 3640 9400
Continuous Horsepower Rating Model Cyl 1500 1800 2000 2300 2600 3000 1B20 1 1.9 2.3 2.6 3.0 3.4 3.8 4.2 1B30 1 2.9 3.7 4.2 4.8 5.2 5.7 6.1 1B40 1 4.4 5.3 6.0 6.9 7.6 8.3 8.8 1B50 1 4.8 5.7 6.5 7.5 8.4 9.2 9.7 1D42Z 1 4.1 5.0 5.7 6.7 7.5 8.0 8.6 1D50Z 1 4.5 5.6 6.4 7.3 8.3 9.1 9.2 1D81Z 1 6.8 8.3 9.1 10.3 11.4 12.6-1D90Z 1 7.9 9.2 10.5 11.7 12.8 13.9-2G40 2 9.5 12.0 13.2 15.2 17.1 18.6 18.6 2M41 2 20.1 24.8 - - - - - 2M41Z 2 20.1 24.8 27.5 31.1 30.6 32.2-3M41 3 30.6 38.1 - - - - - 3M41Z 3 30.6 38.1 42.3 47.6 46.2 48.7-4M41 4 41.6 50.6 - - - - - 4M41Z 4 41.6 50.6 56.3 63.6 61.9 65.0 - Silent Pack Engines Model Cyl 1500 1800 2000 2300 2600 3000 1D42C 1 3.3 4.1 4.6 5.2 5.8 6.4 6.4 1D81C 1 6.7 8.0 8.8 10.1 10.9 12.1-2L41C 2 18.4 22.8 25.6 28.8 28.4 29.9-3L41C 3 28.0 34.3 38.2 43.9 43.1 44.9-4L41C 4 36.7 45.3 50.2 57.5 56.2 59.7 - ALL RATINGS ARE CONTINUOUS HP TO ISO3046-ICXN/ICFN AT STANDARD CONDITIONS DERATING APPLIES FOR TEMPERATURE ABOVE 25 C AND ALTITUDE ABOVE 100 METERS
1B20 Bore and stroke...69 x 62 mm Displacement...232cc Fuel tank capacity...3 litres Dry weight recoil start... 38 kg Dry weight electric start... 45 kg 1500 2.0 1.9 1800 2.6 2.3 2000 2.9 2.6 2300 3.4 3.1 2600 3.8 3.4 3000 4.2 3.8 4.6 4.2 1B40 Bore and stroke...88 x 76 mm Displacement...462cc Fuel tank capacity... 5 litres Dry weight recoil start... 60 kg Dry weight electric start... 63 kg 1500 4.8 4.4 1800 6.0 5.3 2000 6.7 6.0 2300 7.8 6.9 2600 8.6 7.6 3000 9.2 8.3 9.9 8.8 1B30 Bore and stroke...80 x 69 mm Displacement...347cc Fuel tank capacity...5 litres Dry weight recoil start... 47 kg Dry weight electric start... 50 kg 1500 3.1 2.9 1800 4.1 3.7 2000 4.6 4.2 2300 5.3 4.8 2600 5.7 5.2 3000 6.3 5.7 6.8 6.1 1B50 Bore and stroke...93 x 76 mm Displacement...517cc Fuel tank capacity...5 litres Dry weight recoil start... 61 kg Dry weight electric start... 64 kg 1500 5.3 4.8 1800 6.4 5.7 2000 7.2 6.5 2300 8.4 7.5 2600 9.4 8.4 3000 10.3 9.2 10.7 9.7 Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions
1B20V Vertical Shaft Bore and stroke...69 x 65 mm Displacement...243cc Fuel tank capacity...3 litres Dry weight recoil start... 39 kg Dry weight electric start... 46 kg 1500 2.0 1.9 1800 2.6 2.3 2000 2.9 2.6 2300 3.4 3.0 2600 3.8 3.4 3000 4.2 3.8 4.6 4.2 1B40V Vertical Shaft Bore and stroke...88 x 76 mm Displacement...462cc Fuel tank capacity...5 litres Dry weight electric start... 64kg 1500 4.8 4.4 1800 6.0 5.3 2000 6.7 6.0 2300 7.8 6.9 2600 8.6 7.6 3000 9.2 8.3 9.9 8.8 1B30V Vertical Shaft Number of cylinders.... Bore and stroke...80 x 69 mm Displacement...347cc Fuel tank capacity...5 litres Dry weight recoil start... 50 kg Dry weight electric start... 54 kg 1500 3.1 2.9 1800 4.1 3.7 2000 4.6 4.2 2300 5.3 4.8 2600 5.7 5.2 3000 6.3 5.7 6.8 6.1 1B50V Vertical Shaft Bore and stroke...93 x 76 mm Displacement...517cc Fuel tank capacity...5 litres Dry weight recoil start... 53 kg Dry weight electric start... 58 kg 1500 5.3 4.8 1800 6.4 5.7 2000 7.2 6.5 2300 8.4 7.5 2600 9.4 8.4 3000 10.3 9.2 10.7 9.7 Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions
1D42Z Number of cylinders.... Bore and stroke...90 x 72 mm Displacement...445cc Fuel tank capacity...7 litres Dry weight recoil start... 80 kg Dry weight electric start... 87 kg 1500 4.5 4.1 1800 5.6 5.0 2000 6.4 5.7 2300 7.3 6.7 2600 8.3 7.5 3000 9.0 8.0 9.5 8.6 1D81Z Bore and stroke...100 x 85 mm Displacement...667cc Fuel tank capacity...10 litres Dry weight recoil start...112 kg Dry weight electric start...120 kg 1500 7.5 6.8 1800 9.2 8.3 2000 10.3 9.1 2300 11.4 10.3 2600 12.6 11.4 3000 13.7 12.6 13.7 1D50Z Bore and stroke...97 x 70 mm Displacement...517cc Fuel tank capacity...7 litres Dry weight recoil start... 89 kg Dry weight electric start... 95 kg 1500 5.0 4.5 1800 6.3 5.6 2000 7.1 6.4 2300 8.2 7.3 2600 9.2 8.3 3000 10.2 9.1 10.2 9.2 1D90Z Bore and stroke...104 x 85 mm Displacement...722cc Fuel tank capacity...10 litres Dry weight electric start... 112 kg 1500 8.7 7.9 1800 10.3 9.2 2000 11.4 10.5 2300 12.9 11.7 2600 14.0 12.8 3000 15.2 13.9 Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions
1D90V Vertical Shaft Bore and stroke...104 x 85 mm Displacement...722cc Fuel tank capacity...5 litres Dry weight electric start... 115 kg 1500 8.7 7.9 1800 10.3 9.2 2000 11.4 10.5 2300 12.9 11.7 2600 14.0 12.8 3000 15.2 13.9 2M41Z Number of cylinders....2 Bore and stroke...102 x 105 mm Displacement...1716cc Dry weight...285 kg 1500 22.3 20.1 1800 27.5 24.8 2000 30.5 27.5 2300 34.5 31.1 2600 34.0 30.6 3000 35.8 32.2 2G40 Number of cylinders....2 Bore and stroke...92 x 75 mm Displacement...997cc Fuel tank capacity...7 litres Dry weight electric start...107 kg 1500 10.1 9.5 1800 12.6 12.0 2000 14.3 13.2 2300 16.3 15.2 2600 18.2 17.1 3000 20.0 18.6 21.2 18.6 3M41Z Number of cylinders....3 Bore and stroke...102 x 105 mm Displacement...2574cc Dry weight...338 kg 1500 34.0 30.6 1800 42.3 38.1 2000 46.9 42.3 2300 52.9 47.6 2600 51.4 46.2 3000 54.1 48.7 Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions
4M41Z Number of cylinders....4 Bore and stroke...102 x 105 mm Displacement...3432cc Dry weight... 405 kg 1500 46.2 41.6 1800 56.2 50.6 2000 62.6 56.3 2300 70.7 63.6 2600 68.8 61.9 3000 72.2 65.0 1D81C SILENT PACK Bore and stroke...100 x 85 mm Displacement...667cc Dry weight...138 kg 1500 7.3 6.7 1800 8.8 8.0 2000 9.7 8.8 2300 11.0 10.1 2600 12.0 10.9 3000 13.1 12.1 1D42C SILENT PACK Number of cylinders....2 Bore and stroke...90 x 70 mm Displacement...445cc Dry weight electric start...118 kg 1500 3.7 3.3 1800 4.5 4.1 2000 5.0 4.6 2300 5.7 5.2 2600 6.4 5.8 3000 7.1 6.4 7.1 6.4 2L41C SILENT PACK Number of cylinders....2 Bore and stroke...102 x 105 mm Displacement...1716cc Dry weight...330 kg 1500 20.4 18.4 1800 25.4 22.8 2000 28.4 25.6 2300 32.0 28.8 2600 31.6 28.4 3000 33.2 29.9 Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions
3L41C SILENT PACK Number of cylinders....3 Bore and stroke...102 x 105 mm Displacement...2574cc Dry weight... 393 kg 1500 31.1 28.0 1800 38.1 34.3 2000 42.4 38.2 2300 48.8 43.9 2600 47.9 43.1 3000 50.0 44.9 4H50TI Water-cooled Number of cylinders....4 Bore and stroke...84 x 88 mm Displacement...1952cc Cooling system...water cooled Dry weight... 234 kg 1500 55.5 45.4 1800 67.6 55.3 2000 75.2 61.5 2300 83.2 66.1 2600 84.3 67.2 2800 84.3 67.3 3000 4L41C SILENT PACK Number of cylinders....3 Bore and stroke...102 x 105 mm Displacement...3432cc Dry weight... 466 kg 1500 40.8 36.7 1800 50.3 45.3 2000 55.8 50.2 2300 63.9 57.5 2600 62.4 56.2 3000 66.4 59.7 4H50TIC Water Cooled Exhaust emission after treatment...egr, DOC Number of cylinders....4 Bore and stroke...84 x 88 mm Displacement...1952cc Cooling system...water cooled Dry weight... 255 kg 1500 50.4 45.4 1800 61.5 55.3 2000 68.4 61.5 2300 73.4 66.1 2600 74.6 67.2 2800 74.8 67.3 3000 Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions
ENGINE OPTIONS and ACCESSORIES 1B SERIES Stub Shaft Options Part number Description 01325202 ¾ tapered generator shaft 01324602 #6 Ital tapered shaft 01324702 ¾ parallel shaft 01324802 ¾ threaded pump shaft 01324902 20mm parallel shaft 01728503 5/8 threaded shaft 01349102 7/8 parallel shaft 01554002 Raw 26.8mm stub shaft 01580805 1 threaded pump shaft 01580704 1 parallel shaft 01580503 7/8 tapered generator shaft 01580602 25mm parallel shaft 01595302 25mm tapered shaft 01580902 Blank 31.8 DIA shaft un-machined Adaptor Housing Options 01325100 SAE J609A (41.5mm DIA) 01320900 SAE J609b (146.1mm DIA) ENGINE OPTIONS and ACCESSORIES 2G SERIES Stub Shaft Options Part number Description 01135403 40mm parallel shaft Adaptor Housing Options 01137600 SAE5 housing 01137701 PTO Flange SAE6.5 Silent Pack Units ENGINE OPTIONS and ACCESSORIES 1D SERIES Stub Shaft Options Part number Description 01501800 PTO bearing side load kit 01177800 30mm parallel shaft 01175600 1 parallel shaft 01176902 1 taper shaft (genset) 01175300 Flexible coupling Adaptor Housing Options 01404400 SAE B housing 1D41-42-50 01404300 Semi machined housing 01177402 SAE J609B (146.1mm DIA) 1D81-90 01176101 SAE5 housing ENGINE OPTIONS and ACCESSORIES L & M SERIES Stub Shaft Options Part number Description 00384801 48mm parallel shaft 01062100 PTO bearing side load kit 00793700 48mm noise proof stub shaft 00384200 Flexible coupling Adaptor Housing Options 00837801 Heavy flywheel SAE 3/8 01535101 SAE5/5 spacer 00824800 SAE4 housing 00837701 SAE3 housing ADDITIONAL EQUIPMENT Part number Description 99103756 Tacho-hour meter 96500005 24 hour count down timer 99100223 Hour meter 12V 99100224 Hour meter 24V 99000007 Loss of prime with over-ride push button 01563200 35 litre fuel tank 01563400 60 litre fuel tank 01563300 100 litre fuel tank 01576500 Fuel tank console to suit 35 litre tank 01576600 Fuel tank console to suit 60 & 100 litre tank 00802002 Fuel line kit 2 meters 25900110 7mm ID supply line per meter 25900210 4.5mm ID return line per meter 25900410 3.5mm fuel line per meter n/a Engine protection on B series n/a 24V starting and charging system upgrade n/a Auto-start facility via 2 wire remote start n/a Auto-start facility via 7 day programmable time clock start
ENGINE WARRANTY POLICY The Australian warranty on Hatz diesel engines is 24 months from the date of first sale to an "end user" Warranty covers faulty workmanship and materials, and covers the cost of parts, labor (during normal working hours), engine removal and replacement (where necessary), travelling to the site or freight to us, at our option (freight covers overland economy road only, travelling covers up to 250 km round trip by road overland only). This warranty applies to new engines sold in Australia as well as engines imported into Australia on new equipment (engines imported on new equipment must be less than 28 months old, from ex-factory build date). Warranty work should be arranged through Hatz Australia Pty Ltd, one of our Authorized Service Dealers or the original equipment supplier. Warranty applies to the complete engine including parts and accessories supplied by Hatz as original equipment. Warranty does not cover normal wear and tear, corrosion, and operation at low load ("glazing") or overload/over speed, failures resulting from improper installation, inadequate maintenance, long-term) storage, harsh environmental conditions or the use of non-genuine replacement parts. Parts replaced under warranty become the property of Hatz Australia Pty Ltd. Warranty does not cover loss of income or consequential damage unless provided for under Australian Federal or State Law. In certain circumstances a pro-rata warranty may be applied where engine running hours exceed 2,000 hours. While no warranty registration card needs to be completed to qualify for warranty, under certain circumstances, we may require evidence to substantiate purchase date, operating hours and routine maintenance and service dates. The above warranty is in addition to all other rights and remedies existing under Australian Federal and State Law. Terms Prices are ex our works Brisbane. Diesel Parts and Service Pty. Ltd. (A.C.N. 009 818 848) reserves the right to change specifications, pricing or availability without prior notice, or incurring liability of any kind. Listed retail prices are offered as a guide only, and technical details must be confirmed where safety and performance are critical. Prices and specifications are subject to change without notice, and sales are subject to our Conditions of Sales, available on request. E.& O.E.
Diesel Parts & Service Phone: 07 3640 9400 www.dieselparts.com.au