Frameworks DD380800 400 mm deep framework DD380572 DD380573 DD380574 08407. Framework width W = 300 mm 08403 W = 400 mm 08404 W = 650 mm 08406 W = 800 mm 08408 W = 800 mm (650 + 150) 08407 b composition of catalogue numbers: v two frames (with two additional uprights for W = 650 + 150 mm cubicles for the mounting plates and to separate the busbar compartment) v four cross-pieces v mounting hardware v side-by-side combination kit b for the 800 mm width, the busbar compartment can be on the left or right b cubicles can be combined side-by-side and back-to-back b can be equipped with IP30 or IP55 cover panels. DD380801 600 mm deep framework DD380575 DD380576 DD380577 08607. Hinged front plate support frame DD381323 DD31324 Framework width W = 300 mm 08603 W = 400 mm 08604 W = 650 mm 08606 W = 800 mm 08608 W = 800 mm (650 + 150) 08607 b composition of catalogue numbers: v two frames (three for W = 650 + 150 mm cubicles), equipped with intermediate uprights for the mounting plates v four cross-pieces v mounting hardware v side-by-side combination kit b for the 800 mm width, the busbar compartment can be on the left or right b cubicles can be combined side-by-side and back-to-back b can be equipped with IP30 or IP55 cover panels. Hinged front plate support frame, W = 400mm 08504 Hinged front plate support frame, W = 650mm 08506 b secured at two points using M6 screws b can be mounted on 650 mm and 800 mm (650 + 150) wide cubicles. 08506. 08506. 401E23100.fm/2 28 November 2006
Frameworks DD380751 Framework combinations Side-by-side The 650 and 800 mm wide frameworks are supplied with a combination kit comprising six M6 bolts. To maintain the IP55 degree of protection, an optional gasket must be installed between the combined cubicles. IP55 sealing kit for side-by-side combinations (1 kit per combination) 08717 DD381325 DD380752 Back-to-back Double depth combination kit 08719 The kit is made up of: b a set of hardware for the mechanical connections between the cross-pieces b two assembly plates to connect the uprights b the IP55 sealing kit. DD381326 DD381327 Accessories Set of 20 screws + wing nuts for framework 08921 28 November 2006 401E23100.fm/3
IP30/31 cover panels DD380582 Front panels DD380583 Door, W = 650/800 mm. Plain door W = 650 mm 08516 W = 800 mm 08518 Transparent door W = 650 mm 08536 W = 800 mm 08538 page 100E23000_Ver1.1.fm/2. Note : The 800 mm door is supplied with a 150 mm barrier for the side compartment, plus a finishing accessory to improve the appearance of the upright. 08536. 08538. DD380580 DD380581 Cover frame Cover frame W = 400 mm 08554 W = 650 mm 08556 W = 800 mm (650 +150) 08558 b secured using four screws. Note : For 800 mm wide frameworks, the 650 mm frame is supplied with a plain wicket door, 150 mm wide. 08556. 08558. DD380584 DD380602 Door, W = 300/400 mm. Plain door W = 300 mm 08513 W = 400 mm 08514 Transparent door W = 400 mm 08534 Door with cut-out W = 300 mm 08593 W = 400 mm 08594 page 100E23000_Ver1.1.fm/2. Note : The door with cut-out can be equipped with front plates for 72 x 72 or 96 x 96 instruments, see page 100E21060.fm/2. 08513. 08593. 401E23100.fm/4 28 November 2006
IP30/31 cover panels DD380603 Rear panels Rear panel Rear panel W = 300 mm 08733 W = 400 mm 08734 W = 650 mm 08736 W = 800 mm 08738 b made up of two half panels with vents b supplied with quarter-turn fasteners. DD382566 08738. Plain door Plain door W = 300 mm 08513 W = 400 mm 08514 W = 650 mm 08516 W = 800 mm 08518 page 100E23000_Ver1.1.fm/2. Note : The 800 mm door is supplied with a 150 mm barrier for the side compartment, plus a finishing accessory to improve the appearance of the upright. 08518. DD380600 Side panels Side panels Set of two side panels D = 400 mm 08750 D = 600 mm 08760 Supplied with quarter-turn fasteners. Side panels for "L" combinations Combination of two cubicles with different depths (800 + 400 or 1000 + 600). Set of two side panels for "L" combinations D = 400 mm 08756 These panels simply replace the standard side panels. 08750. DD381328 DD381329 DD380601 Roof Plain IP30 roof, D = 400 mm W = 300 mm 08433 W = 400 mm 08434 W = 650 mm 08436 W = 800 mm 08438 Plain IP30 roof, D = 600 mm W = 300 mm 08633 W = 400 mm 08634 W = 650 mm 08636 W = 800 mm 08638 b supplied with quarter-turn fasteners for mounting on the framework b with markings for cut-outs, if necessary. 08438. IP31 sealing kit The kit is made up of a self-adhesive gasket that attaches to the roof and a deflector. It ensures the IP31 degree of protection for a 650 or 800 mm wide cubicle, or for two cubicles (800 + 400) when they are equipped with plain or transparent front doors. IP31 sealing kit 08711 28 November 2006 401E23100.fm/5
IP55 cover panels DD380582 Front panels DD380583 Door, W = 650/800 mm Plain door W = 650 mm 08526 W = 800 mm 08528 Transparent door W = 650 mm 08546 W = 800 mm 08548 page 100E23000_Ver1.1.fm/2. Note : The 800 mm door is supplied with a 150 mm barrier for the side compartment, plus a finishing accessory to improve the appearance of the upright. 08546. 08548. DD380584 Door, W = 300/400 mm Plain door W = 300 mm 08523 W = 400 mm 08524 Transparent door W = 400 mm 08544 page 100E23000_Ver1.1.fm/2. 08523. 401E23100.fm/6 28 November 2006
IP55 cover panels DD380599 Rear panels Rear panel Rear panel W = 300 mm 08743 W = 400 mm 08744 W = 650 mm 08746 W = 800 mm 08748 b supplied with mounting hardware b one-piece, reinforced panel designed to ensure the degree of protection. 08748. DD382566 08528. Plain door Plain door W = 300 mm 08523 W = 400 mm 08524 W = 650 mm 08526 W = 800 mm 08528 page 100E23000_Ver1.1.fm/2. Note : The 800 mm door is supplied with a 150 mm barrier for the side compartment, plus a finishing accessory to improve the appearance of the upright. DD380600 Side panels Side panels Set of two side panels D = 400 mm 08755 D = 600 mm 08765 b supplied with mounting hardware. Side panels for "L" combinations Combination of two cubicles with different depths (800 + 400 or 1000 + 600). Set of two side panels for "L" combinations D = 400 mm 08756 08755. b these panels simply replace the standard side panels. DD380601 DD381328 DD381329 Roof 08458. Plain roof, D = 400 mm W = 300 mm 08453 W = 400 mm 08454 W = 650 mm 08456 W = 800 mm 08458 Plain roof, D = 600 mm W = 300 mm 08653 W = 400 mm 08654 W = 650 mm 08656 W = 800 mm 08658 b supplied with mounting hardware b with markings for clear identification of cable-running zones, if necessary. 28 November 2006 401E23100.fm/7
Plinth Gland plate DD381330 Plinth, H = 100 mm The plinth is made up of two catalogue numbers: b one catalogue number comprising four corner posts + two cross-pieces (front and rear), that can be used in side-by-side combinations or stacked to form a plinth 200 mm high (maximum) b one catalogue number comprising two side plates (400 or 600 mm). Each catalogue number is supplied with the necessary hardware. four corner posts + two cross-pieces (front and rear) W = 300 mm 08723 W = 400 mm 08724 W = 650 mm 08726 W = 800 mm 08728 two side plates D = 400 mm 08720 D = 600 mm 08721 08726 + 08720. DD381331 DD381332 Side-by-side combination of two cubicles with a plinth. Two stacked plinths. DD381333 The front and rear cross-pieces can be easily removed for a pallet-mover. DD381334 Gland plates Gland plates (IP55) Gland plates, D = 400 W = 300 mm 08483 W = 400 mm 08484 W = 650 mm 08486 W = 800 mm (650 + 150) 08487 W = 800 mm 08488 Gland plates, D = 600 W = 300 mm 08683 W = 400 mm 08684 W = 650 mm 08686 W = 800 mm (650 + 150) 08687 W = 800 mm 08688 08486. DD381335 08496. Two-part gland plates (IP30) Two-part gland plates, D = 400 mm W = 300 mm 08493 W = 400 mm 08494 W = 650 mm 08496 W = 800 mm (650 + 150) 08497 W = 800 mm 08498 Two-part gland plates, D = 600 mm W = 300 mm 08693 W = 400 mm 08694 W = 650 mm 08696 W = 800 mm (650 + 150) 08697 W = 800 mm 08698 401E23100.fm/8 28 November 2006
Cellules Right-angle kit DD381336 IP30 right-angle kit Metal duct. Used to create and protect the connection of horizontal busbars between two cubicles installed at right angles. IP30 right-angle kit 08713 Free support and joints, see page 400E22100_Ver2.0.fm/2. DD381337 28 November 2006 401E23100.fm/9