Table of Contents Parts Manual NP4000-1630 Nutri-Pro 40ft. 3 Coulter Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! 32344 Cover illustration may show optional equipment not supplied with standard unit. Copyright 2014 Printed 09/16/14 407-776P
Table of Contents Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frame...6 2 Point Hitch...6 Wing to Frame...8 Wing Rest Mounting...12 Lift Assist to Frame...14 Tank Mounting...16 Weight Bracket (160-296S)...18 Rear Hitch...20 Shiftable Hitch Assembly (417-317S)...22 Shiftable Hitch Assembly (417-409S)...24 LED Lights and Grease Bank (S/N C1038A+)...26 Lights and Grease Bank (S/N C1037A-)...28 Transport...30 Lift Assist Assembly...30 Gauge Wheel and Stand...34 Coulters...36 Coulter Assembly...36 Double Terra-Tine...38 Hydraulics...40 Hydraulic Valve Mounting (407-503S)...40 Fold Hydraulics (2011-)...42 Fold Hydraulics (2012+)...44 Lift Assist Hydraulics...46 Hydraulic Cylinder (810-487C)...48 Hydraulic Cylinder (810-723C)...50 Hydraulic Cylinder (810-771C)...52 Hydraulic Hose Grips...54 Liquid Fertilizer...56 Fertilizer Drive Mounting...56 Liquid Fertilizer Ground Drive Assembly...58 Fertilizer Plumbing to Tanks...60 Tank Fertilizer Plumbing...62 Variable Rate Kit...64 Fertilizer Wet Boom...66 Hydraulic Pump...68 Hydraulic Pump Assembly...70 John-Blue Pump (831-059C)...72 Ball Valve Assembly (829-048C)...74 Banjo Strainer Assembly (831-078C)...76 Decals...78 Decal Placement...78...80 Copyright 2014 All rights reserved Printed 09/16/14 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 407-776P - 2-09/16/14
Table of Contents Alphabetized Table of Contents Selected Models 2 2 Point Hitch...6 B Ball Valve Assembly (829-048C)...74 Banjo Strainer Assembly (831-078C)...76 V Variable Rate Kit...64 W Weight Bracket (160-296S)...18 Wing Rest Mounting...12 Wing to Frame...8 C Coulter Assembly...36 D Decal Placement...78 Double Terra-Tine...38 F Fertilizer Drive Mounting...56 Fertilizer Plumbing to Tanks...60 Fertilizer Wet Boom...66 Fold Hydraulics (2011-)...42 Fold Hydraulics (2012+)...44 G Gauge Wheel and Stand...34 H Hydraulic Cylinder (810-487C)...48 Hydraulic Cylinder (810-723C)...50 Hydraulic Cylinder (810-771C)...52 Hydraulic Hose Grips...54 Hydraulic Pump...68 Hydraulic Pump Assembly...70 Hydraulic Valve Mounting (407-503S)...40 J John-Blue Pump (831-059C)...72 L LED Lights and Grease Bank (S/N C1038A+)...26 Lift Assist Assembly...30 Lift Assist Hydraulics...46 Lift Assist to Frame...14 Lights and Grease Bank (S/N C1037A-)...28 Liquid Fertilizer Ground Drive Assembly...58 R Rear Hitch...20 S Shiftable Hitch Assembly (417-317S)...22 Shiftable Hitch Assembly (417-409S)...24 T Tank Fertilizer Plumbing...62 Tank Mounting...16 09/16/14-3 - 407-776P
Table of Contents 407-776P - 4-09/16/14
Table of Contents 09/16/14-5 - 407-776P
2 Point Hitch Table of Contents 32285 407-776P - 6-09/16/14
2 Point Hitch Table of Contents Frame Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. dwg32285 407-580H 805-168C 805-058C 805-195C 803-024C 804-023C 407-583H 806-128C 407-752H 803-049C 804-037C 407-723H 802-103C 407-780H Image No. LEG PARK STD PIN HITCH 1 7/16 X 8 3/8 PLT PIN COTTER 3/16 X 2 PIN HITCH 3/4 X 5 1/4 USEABLE NUT LOCK 5/8-11 PLT WASHER LOCK SPRING 3/4 PLT HITCH PLATE WELDMENT U-BOLT 3/4-10 X 6 1/32 X 5 5/8 NP4000 2PT TANK FRAME NUT HEX 7/8-9 PLT WASHER LOCK SPRING 7/8 PLT NP4000 CENTER FRAME WELDMENT HHCS 7/8-9X2 3/4 GR5 NP4000 2PT NO TANK FRAME 09/16/14-7 - 407-776P
Wing to Frame Table of Contents 34131 407-776P - 8-09/16/14
Wing to Frame Table of Contents Frame Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 27. 28. 29. 30. 31. 31. 3 33. 34. 35. 36. 37. 38. 39. 40. 41. 41. 4 43. 44. 45. 46. 47. 48. 49. 50. 51. dwg34131 407-723H 810-487C 407-738H 805-412C 804-028C 805-105C 890-011C 407-617H 805-249C 417-002H 417-004H 407-732H 586-243H 407-735H 802-091C 804-015C 803-020C 805-443C 407-731H 804-192C 805-058C 804-024C 407-874D 890-011C 805-134C 407-733H 800-177C 417-003H 417-005H 407-734H 802-017C 890-005C 566-240D 566-241D 804-013C 803-014C 805-001C 407-905D 803-026C 802-192C 805-088C 407-766D 407-767D 806-060C 806-231C 803-021C 804-022C 407-906H 802-055C 810-771C 804-012C 802-417C 802-152C 804-007C 810-455C Image No. NP4000 CENTER FRAME WELDMENT CYL 4X24X1.5 ROD(TIE)34.63C.L. NP4000 GULL WING STOP PIN CLEVIS 1 X 4.13 USBL WASHER FLAT 1 USS PLT PIN COTTER 1/4 X 2 1/2 PLT BUSHING SPINDLE 1 1/2X1 1/4X1 WING PIVOT PIN WELEMENT PIN ROLL 3/8 X 2 PLT NP4000 INNER WING RH 2 NP4000 INNER WING LH 2 NP4000 OTR WING HNG FRONT PIN WING LATCH NP4000 WING LATCH INNER HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT PIN CLEVIS 1 X 7 1/4 USABLE NP4000 DBL HINGE BRACKET WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 WASHER FLAT 3/4 USS PLT NP4000 HINGE LINK BUSHING SPINDLE 1 1/2X1 1/4X1 PIN CLEVIS 1 X 2 29/64 USABLE NP4000 OTR WING HNG REAR PIN SNAP RING EXT 1 1/4 HEAVY NP4000 OUTER WING RH 2 NP4000 OUTER WING LH 2 NP4000 WING LATCH OUTER HHCS 3/8-16X1 GR5 BUSHING CYL 1 1/4 X 1 X 1 WING SHIM 12GA WING SHIM 16GA WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT PIN 3/8 X 3 USABLE LW/PIN CYL LOCK CHANNEL 20 1/4 LONG NUT LOCK 3/4-10 PLT HHCS 3/4-10X4 1/2 GR5 PIN, HAIR COTTER 3/16 WIRE DIA LOCK CHANNEL HOLDER BENT PIN 1/2 X 11 U-BOLT 1/2-13 X 6 1/32 X 7 1/4 U-BOLT 1/2-13 X 6 1/32 X 8 GR5 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT NP4000 SIDEDRESS WING HHCS 5/8-11X2 GR5 CYL 4X24X1 1/2 ROD (TIE ROD) WASHER FLAT 3/8 SAE PLT HHCS 3/8-16X7/8 GR5 HHCS 1/4-20X2 GR5 WASHER FLAT 1/4 SAE PLT SEAL KIT/810-152C SHOEM. #1427 Refer to Hydraulic Cylinder 810-487C for breakdown Shown Right Hand Left Hand Shown Right Hand Left Hand Shown Refer to Hydraulic Cylinder (810-771C) for breakdown 09/16/14-9 - 407-776P
Table of Contents Wing to Frame (continued) Ref. 5 53. 54. 55. 56. 57. 58. 59. 60. 61. 6 63. Part No. 407-994D 804-006C 803-006C 803-025C 407-914H 807-007C 802-070C 407-913H 802-014C 804-016C 119-278D 407-971H Part Description VALVE MOUNT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT NUT HEX 3/4-10 PLT NYLOCK PLUNGER WELDMENT SPRING LEVER HHCS 3/4-10X6 GR5 LATCH WELDMENT HHCS 3/8-16X3/4 GR5 WASHER FLAT 1/2 SAE PLT WALKBOARD LADDER PIVOT BUSHING NP4000 WING STOP, SPRG PLNGR Comments Revision 407-776P - 10-09/16/14
Table of Contents Frame Wing to Frame (continued) This Page Intentionally Left Blank 09/16/14-11 - 407-776P
Table of Contents Wing Rest Mounting 32317 407-776P - 12-09/16/14
Table of Contents Frame Wing Rest Mounting Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. dwg32317 407-969H 803-021C 804-022C 806-124C 802-053C 805-195C Image No. TRANSPORT REST WELDMENT II NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT U-BOLT 5/8-11 X 4 1/32 X 7 3/8 HHCS 5/8-11X1 3/4 GR5 PIN HITCH 3/4 X 5 1/4 USEABLE 09/16/14-13 - 407-776P
Table of Contents Lift Assist to Frame 32288 407-776P - 14-09/16/14
Table of Contents Frame Lift Assist to Frame Ref. Part No. Part Description Comments Revision 1. 3. 4. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. dwg32288 802-096C 804-027C 803-031C 407-739H 417-406H 802-544C 407-750H 804-030C 803-034C 805-100C 890-193C 804-102C 802-069C 803-367C 407-888D 407-749K 407-885K Image No. HHCS 1-8X2 1/2 GR5 WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT NP4000 LIFT ASSIS FRAME WLDMT NP4000 LA FRAME GEN 2 HHCS 1 1/4-7X9 GR5 SPTHD NP4000 LIFT ASSIST CLAMP WLDMT WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT PIN HITCH 1 X 7 1/2 USABLE LG STEEL BUSHING 3 1/4X3IDX3LONG PIVOT THRUST WASHER HHCS 3/4-10X5 GR5 NUT HEX TOP LOCK 3/4-10 PLT NP4000 LIFT ASSIST PIVOT PIN NP4000 LA TAIL WHEEL ASSY NP4000 LA TAIL WHEEL ASSY RH (S/N C1037A-) (S/N C1038A+) 09/16/14-15 - 407-776P
Tank Mounting Table of Contents 32287 407-776P - 16-09/16/14
Tank Mounting Table of Contents Frame Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. dwg32287 407-594S 599-011H 343080 817-546C 818-323C 802-424C 830-024C 803-147C Image No. TANK ASSEMBLY HITCH LIQUID FERT TANK STRAP SNYDER VENTED CAP TANK - 300 GAL POLY LEG DECAL AG CHEMICALS DANGER HHCS 1/2-13X4 FTHD PL 1 1/2MNPT POLYPROP NUT HEX NYLOCK 1/2-13 09/16/14-17 - 407-776P
Table of Contents Weight Bracket (160-296S) 32338 407-776P - 18-09/16/14
Table of Contents Frame Weight Bracket (160-296S) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 dwg32338 802-712C 160-629D 160-628D 160-630D 802-091C 803-316C 804-016C 803-019C 802-226C 407-991D 804-015C 803-020C Image No. HHCS 1-8X14 1/2 GR5 SPTHD NTA WEIGHT BKT. BAR-SHORT NTA WEIGHT BRKT. BAR-LONG NTA WEIGHT BRKT MOUNT HHCS 1/2-13X1 1/2 GR5 NUT HEX SIDE LOCK 1-8 PLT WASHER FLAT 1/2 SAE PLT NUT LOCK 1/2-13 PLT HHCS 1/2-13X2 3/4 GR5 BRACKET STOP WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 09/16/14-19 - 407-776P
Rear Hitch Table of Contents 32289 407-776P - 20-09/16/14
Rear Hitch Table of Contents Frame Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. dwg32289 806-016C 407-721H 407-273H 804-022C 803-021C 407-304H 802-096C 802-128C 804-016C 804-015C 803-020C 891-198C 804-029C 804-027C 803-031C 802-169C 802-074C 407-619H 803-038C 407-620H 407-618S SK13001 SK17006 800REKIT SK16003 Image No. U-BOLT 5/8-11 X 6 1/32 X 5 3/4 DROP HITCH WLDMNT HITCH EXTENSION WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT MOUNT HITCH SHUCK HHCS 1-8X2 1/2 GR5 HHCS 1/2-13X2 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SCHUCK 850 CUSHION HITCH WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HHCS 1-8X3 1/2 GR5 HHCS 1-8X6 1/2 GR5 DRAWBAR PIVOT MOUNT NUT HEX 1-8 NYLON INSERT PLT DRAWBAR PIVOT DRAWBAR PIVOT ASSEMBLY SCHUCK - VERTICAL BACK PIN SCHUCK - 1 SET OF 2 SPRINGS SCHUCK - REPAIR KIT SCHUCK - TONGUE Shown Includes items 21-24 Includes items 16-19 09/16/14-21 - 407-776P
Table of Contents Shiftable Hitch Assembly (417-317S) 36408 407-776P - 22-09/16/14
Table of Contents Frame Shiftable Hitch Assembly (417-317S) Ref. Part No. Part Description Comments Revision 1. 1. 3. 3. 4. 4. 5. 5. 6. 6. 7. 7. 8. 8. 9. 9. 10. 10. 11. 11. 1 1 13. 14. 15. dwg36408 dwg36408 417-318H 417-318H 802-074C 802-074C 802-169C 802-169C 803-027C 803-027C 803-031C 803-031C 804-023C 804-023C 804-027C 804-027C 806-128C 806-128C 891-452C 891-452C 407-620H 407-620H 417-390H 417-390H 803-038C 803-038C 805-502C 805-240C 417-420S Image No. Image No. DROP A-FRAME HITCH WELDMENT DROP A-FRAME HITCH WELDMENT HHCS 1-8X6 1/2 GR5 HHCS 1-8X6 1/2 GR5 HHCS 1-8X3 1/2 GR5 HHCS 1-8X3 1/2 GR5 NUT HEX 3/4-10 PLT NUT HEX 3/4-10 PLT NUT HEX 1-8 PLT NUT HEX 1-8 PLT WASHER LOCK SPRING 3/4 PLT WASHER LOCK SPRING 3/4 PLT WASHER LOCK SPRING 1 PLT WASHER LOCK SPRING 1 PLT U-BOLT 3/4-10 X 6 1/32 X 5 5/8 U-BOLT 3/4-10 X 6 1/32 X 5 5/8 RECEIVER STYLE CUSHION HITCH RECEIVER STYLE CUSHION HITCH DRAWBAR PIVOT DRAWBAR PIVOT DRAWBAR PIVOT WELDMENT SHORT DRAWBAR PIVOT WELDMENT SHORT NUT HEX 1-8 NYLON INSERT PLT NUT HEX 1-8 NYLON INSERT PLT PIN BENT 5/2X2 3/4 USBL PIN LINCH 3/16 X 1 9/16 LONG DRAWBAR PIVOT ASSEMBLY-SHORT Includes items 2 & 10-12 09/16/14-23 - 407-776P
Table of Contents Shiftable Hitch Assembly (417-409S) 36411 407-776P - 24-09/16/14
Table of Contents Frame Shiftable Hitch Assembly (417-409S) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. dwg36411 417-408H 802-074C 802-169C 803-027C 803-031C 804-023C 804-027C 806-128C 891-452C 407-620H 417-390H 803-038C 805-502C 805-240C 417-420S Image No. A-FRAME HITCH WELDMENT-20" HHCS 1-8X6 1/2 GR5 HHCS 1-8X3 1/2 GR5 NUT HEX 3/4-10 PLT NUT HEX 1-8 PLT WASHER LOCK SPRING 3/4 PLT WASHER LOCK SPRING 1 PLT U-BOLT 3/4-10 X 6 1/32 X 5 5/8 RECEIVER STYLE CUSHION HITCH DRAWBAR PIVOT DRAWBAR PIVOT WELDMENT SHORT NUT HEX 1-8 NYLON INSERT PLT PIN BENT 5/8X2 3/4 USBL PIN LINCH 3/16 X 1 9/16 LONG DRAWBAR PIVOT ASSEMBLY-SHORT Includes items 2 & 10-12 09/16/14-25 - 407-776P
Table of Contents LED Lights and Grease Bank (S/N C1038A+) 36412 407-776P - 26-09/16/14
Table of Contents Frame LED Lights and Grease Bank (S/N C1038A+) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 28. 29. 30. 31. 3 33. dwg36412 833-683C 833-689C 833-694C 803-088C 802-167C 803-255C 833-697C 833-696C 806-147C 407-884D 407-721D 802-014C 801-018C 407-726D 800-130C 803-014C 804-013C 818-055C 802-092C 119-300D 804-006C 803-006C 804-009C 803-008C 806-022C 803-147C 802-139C 833-492C 802-004C 407-725D 800-449C 149-553D 800-449C Image No. LIGHT HRNSS, 10' WISHBONE -LED LIGHT HARNESS, 5' LEAD - LED LIGHT HRNSS ENHANCE MODULE LED NUT HEX LOCK 1/4-20 FLG HHCS 1/4-20X1 1/2 GR5 NUT HEX NYLOCK 1/4-20 LIGHT, AMBER LAMP LED LIGHT, RED LAMP - LED U-BOLT 1/4-20 X 2 9/32 X 3 GR2 NP4000 LIGHT BAR TUBE GREASE BANK MOUNT HHCS 3/8-16X3/4 GR5 SCREW RD HD 1/4-20 X 5/8 GREASE BANK - 20 HOLE GREASE ZERK STRAIGHT 1/8-27NPT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT DECAL SLOW MOVING-GALV. BACKED RHSNB 5/16-18X3/4 GR5 SMV BLADE MOUNT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT U-BOLT 3/8-16 X 6 1/32 X 5 PLT NUT HEX NYLOCK 1/2-13 HHCS 7/8-9X7 GR5 7-PIN CONNECTOR HOLDER HHCS 1/4-20X3/4 GR5 HOSE AND HARNESS RETAINER AD PUSH 1/4 TUBE 1/8 FNPT GREASE BANK AD PUSH 1/4 TUBE 1/8 FNPT Used with Rear Coulters 09/16/14-27 - 407-776P
Table of Contents Lights and Grease Bank (S/N C1037A-) 32290 407-776P - 28-09/16/14
Table of Contents Frame Lights and Grease Bank (S/N C1037A-) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 28. 29. 30. 31. 3 33. 34. 35. dwg32290 14705581 14705582 819-183C 803-255C 800-147C 407-884D 803-147C 802-039C 891-184C 818-055C 801-018C 802-092C 119-300D 804-006C 803-006C 804-009C 803-008C 803-065C 804-050C 890-924C 833-492C 802-004C 801-073C 803-014C 804-013C 407-725D 806-022C 800-449C 149-553D 800-130C 802-014C 407-721D 407-726D 833-551C 800-449C Image No. CEQUENT AG HARNESS, 5' EXT CEQUENT AG HARNESS 10' WISHBON ID PLATE NTA2007HD NUT HEX NYLOCK 1/4-20 SNAP RING EXT 3/4 CLIP NP4000 LIGHT BAR TUBE NUT HEX NYLOCK 1/2-13 HHCS 1/2-13X3 GR5 DUAL AG LIGHT W/WP ENHANCED LH DECAL SLOW MOVING-GALV. BACKED SCREW RD HD 1/4-20 X 5/8 RHSNB 5/16-18X3/4 GR5 SMV BLADE MOUNT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT NUT HEX 6-32 SS WASHER LOCK #6 SS LIGHT HARNESS, ENHANCE MODULE 7-PIN CONNECTOR HOLDER HHCS 1/4-20X3/4 GR5 SCREW CS 6-32X3/4 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT HOSE AND HARNESS RETAINER U-BOLT 3/8-16 X 6 1/32 X 5 PLT AD PUSH 1/4 TUBE 1/8 FNPT GREASE BANK GREASE ZERK STRAIGHT 1/8-27NPT HHCS 3/8-16X3/4 GR5 GREASE BANK MOUNT GREASE BANK - 20 HOLE HARNESS EXT 4' 6-PIN WP AD PUSH 1/4 TUBE 1/8 FNPT Used with Rear Coulters 09/16/14-29 - 407-776P
Table of Contents Lift Assist Assembly 32319 407-776P - 30-09/16/14
Table of Contents Transport Lift Assist Assembly Ref. Part No. Part Description Comments Revision 1. 3. 4. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 28. 29. 30. 31. 3 33. 34. 35. 35. 36. 37. 38. 39. 40. 41. 4 43. 44. 45. 46. 47. 48. 49. 50. 51. 5 53. 54. 55. dwg32319 803-032C 407-277H 804-030C 407-878H 407-879H 802-728C 818-437C 803-034C 196-142H 890-005C 804-029C 804-027C 803-031C 196-654D 800-001C 402-172H 890-666C 802-034C 804-015C 161-231D 407-462D 407-281H 805-001C 407-747H 890-193C 802-067C 803-048C 838-380C 266-012D 807-143C 266-020D 804-102C 803-027C 804-023C 802-469C 407-742H 417-407H 802-023C 407-743H 407-865D 803-013C 407-866D 804-205C 803-239C 805-105C 848-801C 802-182C 816-359C 822-144C 802-013C 800-058C 803-089C HDA820 815-377C 814-210C 814-406C 814-405C Image No. NUT HEX JAM 1 1/4-7 PLT HOSE LOOP W/ TAB WASHER LOCK 1 1/4 SPRING PLT LH LIFT ASSIST PVT WLDMNT RH LIFT ASSIST PVT WLDMNT HHCS 1-8X18 GR5 DECAL WARNING HIGH PRESSUR LRG NUT HEX 1 1/4-7 PLT EYEBOLT WELDMENT BUSHING CYL 1 1/4 X 1 X 1 WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT 40P CASTER INNER PIVOT TUBE GREASE ZERK STRAIGHT 1/4-28 16R PARALLEL ARM WLDMNT 2 BUSHING 1 7/8X1 5/8X1 1/2 SPLT HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP CASTER VERT SHAFT CYLINDER LOCK CHANNEL 1 1/2 X PIN 3/8 X 3 USABLE LW/PIN WIDE LA LOWER LINK WLDMT STEEL BUSHING 3 1/4X3IDX3LONG HHCS 3/4-10X4 GR5 FTHD NUT HEX JAM 3/4-10 PLT DECAL CAUTION TRANSP. LOCK PLATE RND 3/16" THK 1 7/8" DIA SPRING COMP 1.88OD x.362w UHMW RND 0 DIA X 0 LONG PIVOT THRUST WASHER NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT HHCS 3/4-10X8 GR5 PLT NP4000 CASTR FRM WLDMT WIDE NP4000 CASTER FRAME GEN2 HHCS 3/8-16X1 3/4 GR5 NP4000 LA AXLE WLDMT NP4000 AXLE SPACER NUT LOCK 3/8-16 PLT NP4000 AXLE SPACER LONG WASHER MACH 2 1/2X1 3/4X10GA NUT HEX SLOTTED 1 1/2-12 PLT PIN COTTER 1/4 X 2 1/2 PLT DECAL CAUTION TIRE 80PSI /300 HUB STUD 5/8-18X2 1/2 GR5 SEAL 3.375X250X.438 CR 22532 BRG CONE 1.75ID 25580 HHCS 5/16-18X1 3/4 GR5 GREASE ZERK 1/4-28 X 45-DEG NUT HEX FLANGE 5/8-18 PLT CTD HD820 HUB HUB ASSY 8 BLT 6" PILOT VALVE STEM METAL TR-575 TUBLES RIM 17.5X10.5 8-8 BLT 6" PILOT TIRE SKID ST 14-17.5NHS 14 PLY LH, Shown RH (S/N C1037A-) (S/N C1038A+) Includes items 45-51 09/16/14-31 - 407-776P
Table of Contents Lift Assist Assembly (continued) Ref. 56. 57. 58. 59. 60. 61. 6 63. 64. Part No. 814-407C 810-723C 810-442C 2A0134 805-124C 804-028C 417-104D 805-027C 816-813C Part Description TIRE/WHEEL 14-17.5NHS 14PLY CYL 3 X 10 X 1 1/4 MW STOP BUSH SET 1 1/4 SBS125 MW COTTER PIN PIN CLEVIS 1 X 3 11/16 GR5 PLT WASHER FLAT 1 USS PLT PIN CLEVIS 1 X 9.25 USEABLE PIN ROOL 5/16 X 1 1/2 PLT HOSE WRAP 3-4.5 X 12LG VELCR Comments Revision Includes items 53-55 Refer to Hydraulic Cylinder (810-723C) for breakdown 407-776P - 32-09/16/14
Table of Contents Transport Lift Assist Assembly (continued) This Page Intentionally Left Blank 09/16/14-33 - 407-776P
Table of Contents Gauge Wheel and Stand 32318 407-776P - 34-09/16/14
Table of Contents Transport Gauge Wheel and Stand Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 28. 29. 30. 31. dwg32318 596-146S 596-065K 806-116C 803-021C 804-022C 407-717D 802-673C 890-888C 802-086C 803-026C 407-585H 802-055C 804-041C 803-200C 805-355C 407-584H 818-398C 802-064C 804-023C 596-147H 822-141C 815-066C 596-230D 803-210C 802-845C 814-210C 814-219C 814-254C 802-262C 804-095C 407-887D Image No. RIPPER GUAGE WHEEL HUB ASY TIRE 20.5 X 8 10 PLY 6 BOLT U-BOLT 5/8-11 X 6 1/32 X 6 1/2 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT EXTENDED GW MOUNT PLATE HHCS 7/16-14X1 1/4 GR5 PLT SCREW JACK 2000# TP-WIND SPCL HHCS 3/4-10X2 3/4 GR5 NUT LOCK 3/4-10 PLT NP DEPTH GW MOUNT HHCS 5/8-11X2 GR5 WASHER FLAT 7/16 SAE PLT NUT HEX LOCK 7/16-14 PLT PIN BENT 1 X 4 3/4 W/HAIRPIN DEPTH GAUGE WHEEL ARM DECAL CAUTION TIRES NOT A STEP HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT RIPPER HUB SPINDLE WELDMENT BRG CONE 1.50ID 13600LA90028 HUB ASSY 6 BOLT 4 5/8 PILOT SPINDLE SLEEVE NUT HEX JAM 1 1/2-12 PLT BOLT WHL 9/16-18X1 1/8 GR5 VALVE STEM METAL TR-575 TUBLES WHEEL 10X6 6/6 4.62 PH.18INSET TIRE 20.5 X 8.0-10 LRE HHCS 5/8-11X7 GR5 WASHER FLAT 5/8 HARD ASTMF436 GAGE WHEEL SPACER Includes items 20-25 Includes items 26-28 09/16/14-35 - 407-776P
Coulter Assembly Table of Contents 32328 407-776P - 36-09/16/14
Table of Contents Coulters Coulter Assembly Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 26. 27. 28. 29. 30. 30. 31. 3 33. 34. 35. 36. 37. 38. 39. 40. 41. 4 43. 44. 45. 46. 47. 48. 49. 50. dwg32328 803-020C 803-021C 804-022C 149-584D 806-016C 204-198H 204-026D 805-043C 801-083C 803-023C 804-015C 149-223H 249-002D 249-003D 800-211C 804-156C 800-164C 804-165C 800-177C 805-331C 802-718C 149-559D 149-558D 803-048C 890-389C 817-513C 204-664H 204-687H 830-322C 802-082C 804-113C 204-434H 204-688H 822-020C 800-001C 820-180C 200-039V 816-009C 822-021C 200-001D 204-379S 802-214C 804-055C 803-029C 805-017C 803-193C 820-074C 828-046C 407-972H 417-023D 804-095C 802-053C 417-006H Image No. NUT HEX 1/2-13 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT COULTER CLAMP 6H X 4W U-BOLT 5/8-11 X 6 1/32 X 5 3/4 DOUBLE SHANK WELDMENT SHANK 1 1/2D X 22 FERT COULT PIN SPIROL 3/8X2 1/2 PLAIN SCREW SET 5/8-11X1 1/2 GR8 CUP NUT HEX JAM 5/8-11 PLT WASHER LOCK SPRING 1/2 PLT LOW PRO COULTER STOP WLMT PVT CLTR CASTING MOUNT RH PVT CLTR CASTING MOUNT LH GREASE ADAPT 1/4-28M X 1/4 TB WASHER MACH 1 1/4X3/4X14GA SNAP RING 3/4 EXTERNAL HEAVY WASHER MACH 1 7/8X1 1/4X 14GA SNAP RING EXT 1 1/4 HEAVY COULTER SPRING GUIDE TUBE EYE BOLT 3/4-10X14 3/4 LG SP SPRING 25 O.D. X.5 COIL COULTER SPRING WASHER NUT HEX JAM 3/4-10 PLT BUSHING 1.50ODX1.25IDX94 BUSHING 1X3/4X1 1/8 FLG HD VAN I 20" SWING ARM WLMT 20" CLTR SWING ARM LH AD 1/4MNPT X 3/8HB STEEL HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 USS HARD PLT VANTAGE I 20" FERTILIZER ARM VANTAGE I 20" LH FERT. ARM BRG CUP LM-67010 GREASE ZERK STRAIGHT 1/4-28 5/8 WAVY-20" TURBO BLADE COULTER HUB & CUP ASSY OIL SEAL DOUBLE LIP BRG CONE 1.25ID LM-67048 HUB GREASE CAP COULTER HUB PACKAGE RHSNB 1/2-13X1 1/4 GR5 WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 3/4 PLT NUT HEX FLANGE 1/2-13 GR G PLT COULTER BLADE 20 FLUTED NOZZLE SOLIDSTRM H1/4U-SS0040 QUICK-ATTACH MNTNG WELDMENT QUICK-ATTACH CLTR MNT WASHER FLAT 5/8 HARD ASTMF436 HHCS 5/8-11X1 3/4 GR5 COULTER SETBACK WELDMENT Shown Shown Shown Includes items 31-32 Includes items 34-37 09/16/14-37 - 407-776P
Double Terra-Tine Table of Contents 32327 407-776P - 38-09/16/14
Table of Contents Coulters Double Terra-Tine Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 28. 29. 30. 31. 3 dwg32327 806-016C 149-584D 804-022C 803-021C 204-198D 805-043C 207-248H 817-084C 207-011D 803-068C 207-002D 802-155C 801-167C 207-250H 207-001D 207-013D 207-247H 804-099C 800-164C 404-027D 802-078C 890-466C 188-007V 207-009S 802-149C 207-005D 807-137C 207-004D 803-230C 802-184C 207-012K 207-013K Image No. U-BOLT 5/8-11 X 6 1/32 X 5 3/4 COULTER CLAMP 6H X 4W WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT END PLATE LEFT PIN SPIROL 3/8X2 1/2 PLAIN ARM SHAFT WELDMENT LH PARALLEL ARM PIVOT BUSHING SPRING TERRA-TINE LEFT ASSY NUT HEX FLANGE 3/8-16 PLT TERRA-TINE SPRING ADJUSTER LH RHSNB 3/8-16X1 1/4 GR5 SET SCREW SQ HD 3/4-10 X 1 1/4 NP DBL TERRA TINE MOUNT TERRA-TINE SPRING ADJUSTER RH SPRING TERRA-TINE RIGHT ASSY ARM SHAFT WELDMENT RH WASHER 1 1/4 X 3/4 X 18 GA PLT SNAP RING 3/4 EXTERNAL HEAVY DD BRG FLANGE DUST COVER HHCS 1/4-20X5/8 GR5 HSG RIBB FLG 6BOLT PLT BRG.760 BORE 205DD FRONT FLANGE BRG ASSEMBLY RHSNB 3/8-16X3/4 GR5 TERRA-TINE FLANGE FRONT SPRING TERRA-TINE FINGER TERRA-TINE FLANGE BACK NUT HEX FLANGE 1/4-20 PLT HHCS 3/4-10X1 1/2 GR5 TERRA-TINE WHEEL RH TERRA-TINE WHEEL LH Includes items 22 & 23 Includes items 10 & 21-29 Includes items 10 & 21-29 09/16/14-39 - 407-776P
Table of Contents Hydraulic Valve Mounting (407-503S) 32011 407-776P - 40-09/16/14
Table of Contents Hydraulics Hydraulic Valve Mounting (407-503S) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. dwg32011 407-520D 802-216C 802-551C 803-006C 803-014C 804-006C 804-013C 806-022C 810-301C 810-345C 810-432C 810-532C 810-669C 811-063C 811-080C 811-150C 811-216C 811-584C 811-677C 811-999C Image No. MOUNT DOWNPRESSURE VALVES HHCS 3/8-16X2 3/4 GR5 HHCS 1/4-20X2 1/4 GR5 NUT HEX 1/4-20 PLT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 1/4 PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 6 1/32 X 5 PLT VALVE PRESS REDUCING W/CHECK VALVE 90 DEGREE SHUT-OFF HYDRAULIC BYPASS VALVE FILTER INLINE 3/4MORB 3/4MJIC PRESSURE GAUGE 3000PSI/200BAR EL 3/4MJIC 3/4MORB TE 3/4MJIC 3/4MORB 3/4MJIC EL 3/4FJIC 3/4MJIC EL 3/4MJIC 9/16MORB AD 9/16MORB 3/4MJIC AD 9/16MORB 1/4FNPT EL 9/16MORB 3/4MORB 09/16/14-41 - 407-776P
Table of Contents Fold Hydraulics (2011-) 34135 407-776P - 42-09/16/14
Table of Contents Hydraulics Fold Hydraulics (2011-) Ref. Part No. Part Description Comments Revision 1. 3. 4. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 16. 17. 17. 18. 19. 20. 21. 2 2 23. 24. 25. 26. dwg34135 810-487C 811-063C 196-430D 811-859C 841-115C 841-508C 810-771C 841-196C 811-150C 811-073C 810-445C 811-079C 811-077C 810-623C 841-115C 502-068D 811-807C 811-115C 811-859C 811-115C 810-661C 811-677C 841-064C 810-532C 841-451C 841-573C 548-002S 811-394C 802-007C 804-009C Image No. CYL 4X24X1.5 ROD(TIE)34.63C.L. EL 3/4MJIC 3/4MORB ORIFICE PLATE 1/16 3/4 HH1/2R2 114 3/4FJIC HH1/2R1 048 3/4FJIC HH1/2R2 130 3/4FJIC CYL 4X24X1 1/2 ROD (TIE ROD) HH1/2R2 024 3/4FJIC EL 3/4FJIC 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC STROKE CONTROL VALVE TE 3/4FJIC 3/4MJIC 3/4MJIC TE 3/4MORB 3/4MJIC 3/4MJIC HYD BYPASS /W 2 PRESS REG HH1/2R1 048 3/4FJIC HYD HOSE CLAMP BRACKET HH1/2R2 120 3/4FJIC EL 13/16MFS 3/4MORB HH1/2R2 114 3/4FJIC EL 13/16MFS 3/4MORB VALVE 3 SECT PRESS REDUCE W/BP AD 9/16MORB 1/4FNPT EL 3/4MORB X 3/4FORB FILTER INLINE 3/4MORB 3/4MJIC HH1/2R2 148 3/4FJIC 3/4MORB HH1/2R2 168 3/4MORB 3/4FJIC HG PAIR - RED MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT Refer to Hydraulic Cylinder (810-487C for breakdown Refer to Hydraulic Cylinder (810-771C) for breakdown Used with Fertilizer Tanks Used without Fertilizer Tanks Used with Fertilizer Tanks Used without Fertilizer Tanks Used with Fertilizer Tanks Used without Fertilizer Tanks Refer to Hydraulic Hose Grips for breakdown 09/16/14-43 - 407-776P
Table of Contents Fold Hydraulics (2012+) 34132 407-776P - 44-09/16/14
Table of Contents Hydraulics Fold Hydraulics (2012+) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 14. 15. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 28. 29. 30. 31. 3 33. 34. 35. 36. dwg34132 810-487C 811-063C 152-498D 811-859C 810-771C 811-077C 196-430D 811-073C 810-445C 811-340C 811-279C 841-115C 811-078C 811-807C 841-115C 811-859C 841-115C 811-150C 811-080C 811-331C 810-345C 811-999C 810-301C 811-324C 810-669C 811-677C 811-216C 810-352C 810-432C 811-431C 841-451C 548-002S 811-394C 811-147C 811-584C 802-007C 804-009C 502-068D Image No. CYL 4X24X1.5 ROD(TIE)34.63C.L. EL 3/4MJIC 3/4MORB ORIFICE PLATE 1/8 8 MORB HH1/2R2 114 3/4FJIC CYL 4X24X1 1/2 ROD (TIE ROD) TE 3/4MORB 3/4MJIC 3/4MJIC ORIFICE PLATE 1/16 3/4 TE 3/4MJIC 3/4MJIC 3/4FJIC STROKE CONTROL VALVE HH1/2R2 030 3/4FJIC HH1/2R2 060 3/4FJIC HH1/2R1 048 3/4FJIC TE 3/4MJIC HH1/2R2 120 3/4FJIC HH1/2R1 048 3/4FJIC HH1/2R2 114 3/4FJIC HH1/2R1 048 3/4FJIC EL 3/4FJIC 3/4MJIC TE 3/4MJIC 3/4MORB 3/4MJIC HH1/2R2 020 3/4FJIC VALVE 90 DEGREE SHUT-OFF EL 9/16MORB 3/4MORB VALVE PRESS REDUCING W/CHECK AD 3/4MORB 3/4FJIC PRESSURE GAUGE 3000PSI/200BAR AD 9/16MORB 1/4FNPT EL 3/4MJIC 9/16MORB SEAL KIT ENERGY 3" 15735 HYDRAULIC BYPASS VALVE HH1/2R2 011 3/4FJIC HH1/2R2 148 3/4FJIC 3/4MORB HG PAIR - RED MORB-FORB CP 3/4FORB MALE QD POPPET TYPE CR 3/4MJIC AD 9/16MORB 3/4MJIC HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT HYD HOSE CLAMP BRACKET Refer to Hydraulic Cylinder (810-487C) for breakdown Refer to Hydraulic Cylinder (810-771C) for breakdown Used with Fertilizer Tanks Used without Fertilizer Tanks Used with Fertilizer Tanks Used without Fertilizer Tanks Refer to Hydraulic Hose Grips for breakdown 09/16/14-45 - 407-776P
Table of Contents Lift Assist Hydraulics 31926 407-776P - 46-09/16/14
Table of Contents Hydraulics Lift Assist Hydraulics Ref. Part No. Part Description Comments Revision 1. 3. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. dwg31926 811-394C 841-551C 811-834C 811-785C 841-508C 811-078C 811-715C 811-148C 810-024C 811-079C 811-830C 811-063C 810-723C 802-007C 804-009C 502-068D Image No. CP 3/4FORB MALE QD POPPET TYPE HH1/2 R2 162 3/4FJIC HH1/2R2 122 3/4FJIC HH1/2R2 168 3/4FJIC HH1/2R2 130 3/4FJIC TE 3/4MJIC HH1/2R2 097 3/4FJIC AD 3/4MJIC 3/8MNPT ONE-WAY RESTRICTOR VALVE TE 3/4FJIC 3/4MJIC 3/4MJIC HH1/2R2 084 3/4FJIC EL 3/4MJIC 3/4MORB CYL 3 X 10 X 1 1/4 HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT HYD HOSE CLAMP BRACKET Used with Fertilizer Tank Option only Used with No Fertilizer Tank Option only Used with Fertilizer Tank Option only Used with No Fertilizer Tank Option only Refer to Hydrualic Cylinder (810-723C) for Breakdown 09/16/14-47 - 407-776P
Table of Contents Hydraulic Cylinder (810-487C) 31596 407-776P - 48-09/16/14
Table of Contents Hydraulics Hydraulic Cylinder (810-487C) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. dwg31596 2A0134 1M7021-ADI 805-124C 802-023C 803-234C 2S6570 2A0018 3R5412 4M6108 2A0024 5M6132 7M6332 6R5162-ADI 810-060C Image No. MW COTTER PIN MW ROD CLEVIS 1.00PN 1.5-12THD PIN CLEVIS 1 X 3 11/16 GR5 PLT HHCS 3/8-16X1 3/4 GR5 NUT HEX 3/8-16 PLAIN MW ROD MW WIPER MW U-CUP MW TIE ROD NUT MIDWAY HEAD BACK UP MIDWAY O-RING MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON MW PISTON NUT 1-14 MW TUBE 4 X 24 CYLINDER MW TIE ROD 4 X 24 CYLINDER MIDWAY ADI BASE CYL SEAL KIT-810-031C-5A6104 Available in item 20 only Available in item 20 only Available in item 20 only Available in item 20 only Available in item 20 only Available in item 20 only 09/16/14-49 - 407-776P
Table of Contents Hydraulic Cylinder (810-723C) 31939 407-776P - 50-09/16/14
Table of Contents Hydraulics Hydraulic Cylinder (810-723C) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. dwg31939 810-015C 2A0134 803-234C 1M7016-ADI 805-124C 802-023C 2M4418 2A0014 3R1412 4M4108 2A0024 5M4118 7M4318 6R1164-ADI Image No. CYL SEAL KIT MW (5A4104) 3 X 7 MW COTTER PIN NUT HEX 3/8-16 PLAIN MIDWAY HARDENED CLEVIS ADI PIN CLEVIS 1 X 3 11/16 GR5 PLT HHCS 3/8-16X1 3/4 GR5 MW ROD 1-1/4 DIA. X 10 STROKE MW WIPER U-CUP MW TIE ROD NUT MW HEAD 3X1-1/4 ROD PT.E BACK-UP MIDWAY O-RING MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON MW PISTON NUT 1-14 MW TUBE MW TIE ROD MIDWAY ADI BASE Available in item 1 only Available in item 1 only Available in item 1 only Available in item 1 only Available in item 1 only Available in item 1 only 09/16/14-51 - 407-776P
Table of Contents Hydraulic Cylinder (810-771C) 34134 407-776P - 52-09/16/14
Table of Contents Hydraulics Hydraulic Cylinder (810-771C) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. dwg34134 2A0134 1M7021-ADI 805-124C 802-023C 803-234C 2S6570 2A0040 2A0434 2A0018 3R5412 4M6108 2A0024 5M6132 7M6332 6R5162-ADI 810-060C 407-999D Image No. MW COTTER PIN MW ROD CLEVIS 1.00PN 1.5-12THD PIN CLEVIS 1 X 3 11/16 GR5 PLT HHCS 3/8-16X1 3/4 GR5 NUT HEX 3/8-16 PLAIN MW ROD MW WIPER MW U-CUP MW TIE ROD NUT MW HEAD BACK UP MIDWAY O-RING MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON MW PISTON NUT 1-14 MW TUBE 4 X 24 CYLINDER MW TIE ROD 4 X 24 CYLINDER MIDWAY ADI BASE CYL SEAL KIT-810-031C-5A6104 MOUNTING PLATE CYLINDER Available in item 20 only Available in item 20 only Available in item 20 only Available in item 20 only 09/16/14-53 - 407-776P
Table of Contents Hydraulic Hose Grips 31842 407-776P - 54-09/16/14
Table of Contents Hydraulics Hydraulic Hose Grips Ref. Part No. Part Description Comments Revision 1. 1. 1. 1. 1. 1. 3. dwg31842 811-826C 811-914C 811-915C 811-917C 841-540C 841-542C 811-913C 811-827C 811-916C 811-918C 841-541C 841-543C 811-919C Image No. HG HANDLE - BLACK EXT HG HANDLE - RED EXT HG HANDLE - GREEN EXT HG HANDLE - YELLOW EXT HG HANDLE - GRAY EXT HG HANDLE - BLUE EXT HG HANDLE - BLACK RET HG HANDLE - RED RET HG HANDLE - GREEN RET HG HANDLE - YELLOW RET HG HANDLE - GRAY RET HG HANDLE - BLUE RET AD 3/4MORB 3/4FORB (HG) Used on return to tractor hose & Used on air drill fan hose. Used on field lift cylinders. Used on marker cylinders. Used on Hydraulic Drive. Used on fold cylinders. Used on transport lift cylinders. Used on return to tractor hose & Used on air drill fan hose. Used on field lift cylinders. Used on marker cylinders. Used on Hydraulic Drive. Used on fold cylinders. Used on transport lift cylinders. 09/16/14-55 - 407-776P
Table of Contents Fertilizer Drive Mounting 31946 407-776P - 56-09/16/14
Table of Contents Liquid Fertilizer Fertilizer Drive Mounting Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. dwg31946 115631-01 831-059C 808-062C 806-016C 802-022C 804-022C 803-021C 803-169C 804-113C 804-011C 803-086C 817-406C 407-333D 802-041C 808-147C 805-240C 818-860C 407-579H Image No. JB SETTING WRENCH PUMP, CDS-JOHN BLUE NGP-7055 SPKT 40B15 X 1 B W/KW & SS U-BOLT 5/8-11 X 6 1/32 X 5 3/4 HHCS 3/8-16X1 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT NUT HEX FLG LOCK 1/2-13 PLT WASHER FLAT 1/2 USS HARD PLT WASHER FLAT 3/8 USS PLT NUT MAC-LOK FLG 3/8-16 GR F IDLER 1 PC 38X1.01X1.062 SPACER HHCS 1/2-13X3 1/2 GR5 SPKT 40C15 X 7/8 HEX BORE PIN LINCH 3/16 X 1 9/16 LONG DECAL WARNING MOVING CHAIN FRAME EXTENSION 09/16/14-57 - 407-776P
Table of Contents Liquid Fertilizer Ground Drive Assembly 31079 407-776P - 58-09/16/14
Table of Contents Liquid Fertilizer Liquid Fertilizer Ground Drive Assembly Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 28. 29. 30. 31. 3 33. 34. 35. 36. 37. 38. 39. 40. 41. 4 43. 44. 45. 46. 47. 48. 49. 50. 51. 5 53. 54. 55. 56. dwg31079 802-331C 407-473D 407-329H 804-015C 803-020C 822-240C 822-020C 800-001C 407-327D 407-227S 802-106C 803-383C 407-426D 804-013C 802-079C 804-061C 805-180C 822-175C 822-119C 802-282C 136-016D 803-177C 407-283H 407-229H 802-041C 804-113C 817-406C 407-333D 803-169C 805-127C 805-109C 407-992S 120-290D 407-297H 120-188D 188-006V 800-038C 120-269S 407-427D 808-262C 805-240C 136-126D 802-082C 802-048C 818-860C 838-265C 818-323C 816-306C 802-550C 812-442C 807-159C 153-053D 803-193C 803-036C 121-166D 407-408D Image No. RHSNB 1/2-13X1 3/4 GR5 GROUND DRIVE WHEEL HUB BOLT ON GROUND DRIVE WHL WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT BRG, DUO-FACE W/SEAL LM67000LA BRG CUP LM-67010 GREASE ZERK STRAIGHT 1/4-28 4BOLT HUB TAPPERED ROL BRG 4BOLT HUB ASY TAPPERED ROL BRG RHSNB 1/2-13X1 1/2 GR5 NUT HEX JAM 1 1/4-12 PLT SHIELD GROUND DRIVE ARM WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X1 1/4 GR5 WASHER MACH 1.50 X 1.00 X 18GA PIN ROLL 1/4 X 1 1/2 LG PLT FLANGETTE 52 3-BOLT PLT BRG 7/8HEXX05OD SPH RHSNB 5/16-18X1 GR5 CHAIN RL #40 122 PITCHES NUT HEX FLG TP LK 5/16-18ZNYCR GROUND DRIVE ARM FERT DRIVE SPKT WLMT HHCS 1/2-13X3 1/2 GR5 WASHER FLAT 1/2 USS HARD PLT IDLER 1 PC 38X1.01X1.062 SPACER NUT HEX FLG LOCK 1/2-13 PLT PIN CLEVIS 1/2 X 1 3/4 PIN COTTER 1/8 X 1 1/4 PLT GND DRIVE SPRING ASY SPKT 40C15 7/8 HEX W/ SS HOLES MOUNT GROUND DRIVE 3 BOLT PIVOT CAST W/BRG SEAT BRG.880 HEX BORE 205DD SNAP RING INT 05 OD 3 BOLT PIVOT BRG ASSY SHAFT HEX 7/8 X 12" LONG SPKT 40C47 X 7/8 HEX BORE PIN LINCH 3/16 X 1 9/16 LONG CHAIN RL #40 99 PITCHES HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X9 1/2 GR5 DECAL WARNING MOVING CHAIN DECAL REFLECTOR AMBER 1 1/2X9 DECAL AG CHEMICALS DANGER PLUG, SPRING ROD CASTING HHCS 1/2-13X10 SPTHD GR8 DRV WHL SPRING TRUNION CASTING SPRING COMP 2 1/2ODX3/8X12 7/8 SPRING STOP STAMPING SMALL NUT HEX FLANGE 1/2-13 GR G PLT NUT HEX JAM 1/2-13 PLT ADJ. YOKE END SHAFT HEX 7/8 X 8 LONG Includes items 6-9 Includes items 48-55 Includes items 35-37 09/16/14-59 - 407-776P
Table of Contents Fertilizer Plumbing to Tanks 32346 407-776P - 60-09/16/14
Table of Contents Liquid Fertilizer Fertilizer Plumbing to Tanks Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 28. 29. 30. 31. 3 33. 34. 35. 36. 37. 38. 39. 40. 41. 4 43. 44. 45. 46. 47. dwg32346 990-080R 830-121C 829-105C 830-161C 829-104C 801-071C 507-040D 816-144C 818-344C 507-039D 507-034V 830-192C 830-215C 830-236C 830-045C 830-052C 830-094C 800-259C 990-181R 830-279C 829-107C 830-254C 816-161C 830-351C 831-078C 829-126C 502-174D 802-159C 804-013C 803-195C 804-036C 804-009C 803-008C 830-155C 830-387C 830-324C 829-048C 830-186C 830-325C 848-555C 802-034C 804-015C 803-020C 407-638H 407-720D 502-060D 805-010C Image No. HOSE 3/8 ID 150PSI EPDM EL 3/4MNPT X 3/8HB POLYPROP VALVE RELIEF 0-150 PSI POLYP AD 1 1/2MNPT X 3/4FNPT POLYP GAUGE 100 PSI 4IN STAINLESS ST SRHMS 5-40X5/8 SS GAUGE PROTECTOR TOP DIAPHRAGM - GAUGE PROTECTOR DECAL NOTICE GAUGE PROTECTOR GAUGE PROTECTOR BOTTOM GAUGE PROTECTOR ASSY AD 1/4MNPT CLOSE X 7/8 SS AD 3/4MNPT X 1/4FNPT POLYPROP CR 1 1/2FNPT AD 1 1/2MNPT POLYPROP EL 1 1/2MNPT X 1 1/2FNPT POLYP AD 1 1/2MNPT X 1 1/2HB POLYP CLAMP WRM DRV#36SS (1.81-75) HOSE 1 1/2 ID 150PSI EPDM AD 1 1/2MNPT X 1 1/2HB H SAVER 2" VALVE GASKET AD 1 1/2MNPT X 1HB POLYPROP GASKET 1 1/2 CAM-LOCK CP EPDM CLAMP 2" BANJO FLANGE STRAINER BANJO MLST150-80 MESH VALVE 1 1/2 MANI 3 WAY BALL ANGLE - 1 1/2 B VALVE SUPPORT HHCS 5/16-18X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 SS WASHER FLAT 5/16 SAE PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT EL 1 1/2 FLANGE POLY EL 1 1/2 FLANGE 45 DEG POLY AD 1 1/2 FLG X 1 1/2 MNPT POLY VALVE - 1 1/2FNPT X 2FCL POLYP PL 2MCL POLY-GLASS EL 1 1/2 FLANGE X 1 1/2HB POLY DECAL VALVE SELECTOR HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HOSE CLAMP WELDMENT QUICKFILL MOUNT DUST PLUG CHAIN 10 PIN HAIR COTTER.094 Includes items 6-10 Refer to Banjo Strainer (831-078C) for breakdown Refer to Ball Valve Assembly (829-048C) for breakdown 09/16/14-61 - 407-776P
Table of Contents Tank Fertilizer Plumbing 31952 407-776P - 62-09/16/14
Table of Contents Liquid Fertilizer Tank Fertilizer Plumbing Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. dwg31952 830-052C 830-324C 830-351C 816-161C 830-325C 829-126C 830-329C 830-345C 800-125C 990-181R Image No. EL 1 1/2MNPT X 1 1/2FNPT POLYP AD 1 1/2 FLG X 1 1/2 MNPT POLY CLAMP 2" BANJO FLANGE GASKET 1 1/2 CAM-LOCK CP EPDM EL 1 1/2 FLANGE X 1 1/2HB POLY VALVE 1 1/2 MANI 3 WAY BALL TEE 1 1/2 FLANGE POLY AD 2"FLANGE X 1 1/2 HB CLAMP WRM DRV#28 SS(1.31-25) HOSE 1 1/2 ID 150PSI EPDM 09/16/14-63 - 407-776P
Variable Rate Kit Table of Contents 31963 407-776P - 64-09/16/14
Table of Contents Liquid Fertilizer Variable Rate Kit Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. dwg31963 806-034C 407-513D 804-015C 803-020C 830-328C 816-467C 830-327C 800-123C 823-217C 802-078C 804-006C 830-047C 823-236C 816-161C 830-351C 823-207C 823-208C 830-325C 800-259C 990-181R 990-082R 823-218C 823-222C 823-212C 823-237C Image No. U-BOLT 1/2-13 X 6 1/32 X 5 1/4 PLATE MOUNT RAVEN 4 SECT VALVE WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT EL 1 FLANGE X 1HB POLY GASKET 1 MANIFOLD M100G EPDM CLAMP 1 BANJO FLANGE CLAMP WRM DRV #16 SS (.68-1.5) RAVEN PRESSURE SENSOR HHCS 1/4-20X5/8 GR5 WASHER LOCK SPRING 1/4 PLT EL 1/4MNPT X 1/4FNPT POLYP RAVEN 3-SECT BOOM VALVE GASKET 1 1/2 CAM-LOCK CP EPDM CLAMP 2" BANJO FLANGE RAVEN RMF-60 FLOWMETER RAVEN 1 1/2 POLY CONTROL VALVE EL 1 1/2 FLANGE X 1 1/2HB POLY CLAMP WRM DRV#36SS (1.81-75) HOSE 1 1/2 ID 150PSI EPDM HOSE 1 ID 200PSI EPDM RAVEN PRESS SENS 12' CABLE RAVEN PRESS SENS 10' CABLE RAVEN 10' 450 CONSOLE CABLE RAVEN 12' 440 FLOW CABLE MANI 09/16/14-65 - 407-776P
Table of Contents Fertilizer Wet Boom 32332 407-776P - 66-09/16/14
Table of Contents Liquid Fertilizer Fertilizer Wet Boom Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 28. 29. 30. 31. 3 33. 34. 35. 36. 37. 37. 37. 37. 37. 37. 38. 38. dwg32232 829-089C 832-051C 830-071C 407-373S 806-152C 830-034C 806-022C 830-061C 832-042C 830-085C 407-519D 803-013C 803-007C 800-390C 990-080R 407-876D 830-028C 800-123C 990-082R 407-878D 407-879D 407-880D 407-881D 407-877D 417-033D 417-034D 407-886D 407-885D 407-753K 407-755K 407-756K 407-757K 407-758K 407-759K 407-762K 830-021C 832-052C 832-056C 832-053C 832-054C 832-055C 832-059C 829-143C 829-144C Image No. NOZZLE BODY 3/4 WET BOOM CLAMP NOZZLE CAP QUICK X 90X1/4 FNPT AD 1/4MNPT X 3/8HB POLYPROP NOZZLE ASSEMBLY - 3/8 HOSE U-BOLT 1/4-20 X 1.125 X 2 RND EL 3/4FNPT POLYPROP U-BOLT 3/8-16 X 6 1/32 X 5 PLT CA 3/4FNPT POLYPROP NOZZLE SHUT OFF CAP W/ GASKET AD 3/4MNPT X 1HB POLYPROP MANIFOLD BRACKET NUT LOCK 3/8-16 PLT NUT LOCK 1/4-20 PLT CLAMP WRM DRV #6 SS (.38-.87) HOSE 3/8 ID 150PSI EPDM MANIFOLD 4 HOLE TEE 3/4FNPT POLYPROP CLAMP WRM DRV #16 SS (.68-1.5) HOSE 1 ID 200PSI EPDM MANIFOLD 2 HOLE MANIFOLD BRKT SHORT 4 OUTLET MANIFOLD NP4000 MANIFOLD 2 HOLE NP4000 MANIFOLD 3 HOLE WING MANIFOLD MOUNT 2ND PRDCT MNFLD, 8 OUTLET MANIFOLD BRACKET SHORT MANIFOLD 4 HOLE NP4000 8 OUTLET BOOM KIT NP4000 4 OUTLET BOOM KIT CNTR NP4000 4 OUTLET BOOM KIT NP4000 2 OUTLET BOOM KIT NP4000 3 OUTLET BOOM KIT NP4K 8 OUTLET BOOM KIT 4 OUTLET BOOM KIT PL 3/4MNPT POLYPROP ORIFICE SPR SYS CP4916-20 SS ORIFICE SPR SYS CP4916-28 SS ORIFICE SPR SYS CP4916-34 SS ORIFICE SPR SYS CP4916-48 SS ORIFICE SPR SYS CP4916-80 SS ORIFICE SPR SYS CP4916-98 NOZZLE HI-VERIFLOW1 NOZZLE VERIFLOW1 Includes items 1-3 Mounted on Rear Center Section Frame Mounted on Front Center Section Frame Mounted on Front Inner Wings Mounted on Front Outer Wing Right Hand Mounted on Front Outer Wing Left Hand Mounted on Rear Inner Wings Mounted on Rear Outer Wings Full Flow SHOWN Half Flow 09/16/14-67 - 407-776P
Hydraulic Pump Table of Contents 34415 407-776P - 68-09/16/14
Hydraulic Pump Table of Contents Liquid Fertilizer Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 18. 19. 20. 21. 2 23. 24. dwg31964 407-759D 800-125C 800-208C 802-022C 803-014C 803-068C 804-013C 806-051C 811-023C 816-161C 829-107C 830-335C 830-325C 830-351C 830-368C 831-058C 990-079R 841-553C 841-554C 548-001S 811-394C 841-229C 990-226R 407-511D 806-022C Image No. NP ACE PUMP MOUNT CLAMP WRM DRV#28 SS(1.31-25) CLAMP T-BOLT STRAP (1.81-06) HHCS 3/8-16X1 1/2 GR5 NUT HEX 3/8-16 PLT NUT HEX FLANGE 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 6 1/32 X 7 AD 1/2MNPT 3/4FORB GASKET 1 1/2 CAM-LOCK CP EPDM 2" VALVE GASKET CLAMP 2FP BANJO FLANGE EL 1 1/2 FLANGE X 1 1/2HB POLY CLAMP 2" BANJO FLANGE EL 2FP FLANGE X 1 1/2HB POLY PUMP, ACE CENTRIFIGAL HYD DRV HOSE 1 1/2ID EPDM SUCTION HOSE HH1/2 R2 112 3/4MORB 3/4MORB90 HH1/2 R2 080 3/4MORB 3/4MORB90 HG PAIR - BLACK MORB-FORB CP 3/4FORB MALE QD POPPET TYPE AD 1/8MNPT 3/16 HOSE BARB HOSE 1/4 OD 3/16 ID - EVA MOUNT HOSE AND 7 PIN HOLDER U-BOLT 3/8-16 X 6 1/32 X 5 PLT Refer to Hydraulic Pump Assembly for breakdown Used with Fertilizer Tank Option only Used without Fertilizer Tank Option only Refer to Hydraulic Hose Grips for breakdown 09/16/14-69 - 407-776P
Table of Contents Hydraulic Pump Assembly 31965 407-776P - 70-09/16/14
Table of Contents Liquid Fertilizer Hydraulic Pump Assembly Ref. Part No. Part Description Comments Revision 1. 1. 3. 4. 5. 5. 6. 6. 7. 8. 9. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. 27. 28. dwg31965 Image No. BAC-53 ACE PIPE PLUG 41120 ACE 18 NPT PLUT SS BAC-12-150-FLG ACE VOLUTE 1-1/2NPT X 1-1/4NPT 803-146C NUT HEX 3/8-24 PLT BAC-24-HYD-SS ACE 3/8" WASHER BAC-26-150-P ACE IMPELLER, VALOX, KEYWAY BAC-26-150-CI ACE IMPELLER, CAST IRON KEYWAY BAC-7V ACE MECHANICAL, VITON & 401060 BAC-7SC ACE SILICON CARBIDE & 40160 BAC-4-150 ACE O-RING VOLUTE SEAL BAC-14-150-HYD ACE MOUNTING FRAME (200 SERIES 40950 ACE 3/8X3/4 BOLT 40930 ACE 3/8X3/4 BOLT SS OPTIONAL BAC-54 ACE PUMP SLINGER BAC-33 ACE PUMP INTERNAL SNAP RING BAC-37 ACE PUMP SEALED BALL BEARING BAC-32 ACE PUMP EXTERNAL SNAP RING BAC-32-S ACE SPACER BACH-25 ACE 1/8"X1/8"X1/2" KEY BAC-6-HYD-SS ACE SHAFT, 5/8 DIA, KW & TANG S200 ACE SEAL SPPRT SPCR (200SERIES 507-110A MOTOR, ACE HYD DRV UPDATE KIT 41255 CAP SCREW, 5/16" N.C. x 3-3/4" 40160 ACE O-RING SHAFT SEAL RK-FMC-150 ACE REPAIR KIT FMC-(150 SERIES RK-BAC-75-HYD-L SEAL KIT FOR BAC-75-HYD-296 BAC-78-8SAE REV CK VALVE ASY FOR 831-058C 41448 O-RING ORIFICE INSERT 831-058C BAC-80-8SAE AD RESTRICTOR BODY 831-058C BAC-76-HYD ACE COUPLING FOR HYD MOTOR 41875 O-RING, #8 SAE FITTING 829-131C FLOW LIMITER VALVE- ACE LS206N 09/16/14-71 - 407-776P
Table of Contents John-Blue Pump (831-059C) 31625 407-776P - 72-09/16/14
Table of Contents Liquid Fertilizer John-Blue Pump (831-059C) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. dwg31625 115688 115606-91 115607-91 115627-01 115628-01 115979-01 115631-01 Image No. REPAIR KIT JB FOR 831-059C SUCTION VALVE FOR JB 831-059C DISCHGE VALVE JB FOR 831-059C SETTING HUB SETTING POINTER FOR JB 831-059 CDS JOHN-BLUE SLIDE RULE JB SETTING WRENCH 09/16/14-73 - 407-776P
Table of Contents Ball Valve Assembly (829-048C) 25494 407-776P - 74-09/16/14
Table of Contents Liquid Fertilizer Ball Valve Assembly (829-048C) Ref. Part No. Part Description Comments Revision 1. 3. dwg25494 802-301C 804-075C 829-048C Image No. HHCS 1/4-20X1/2 GR5 WASHER FLAT 1/4 USS PLT VALVE - 1 1/2FNPT X 2FCL POLYP 09/16/14-75 - 407-776P
Table of Contents Banjo Strainer Assembly (831-078C) 31954 407-776P - 76-09/16/14
Table of Contents Liquid Fertilizer Banjo Strainer Assembly (831-078C) Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. dwg31954 MLST150-H LST1580 LST-1550 LST150-G LST150-B LSQ200-R LSQ200-PL Image No. HEAD FOR BANJO 831-078C SCREEN FOR STRAINER 831-029C BANJO SCREEN 50M GASKET FOR 831-029C BANJO 1 1/2 FLG T-STRAIN BOWL BANJO GASKET/O-RING PLUG FOR BANJO 831-078C Used with 80 Mesh Used with 50 Mesh 09/16/14-77 - 407-776P
Decal Placement Table of Contents 32339 407-776P - 78-09/16/14
Table of Contents Decals Decal Placement Ref. Part No. Part Description Comments Revision 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 1 13. 14. 15. 16. 17. 18. 19. 20. 21. 2 23. 24. 25. 26. dwg32339 818-719C 838-599C 818-587C 818-337C 818-590C 818-437C 848-911C 838-265C 838-267C 838-266C 838-380C 848-796C 838-482C 848-551C 818-323C 817-853C 803-225C 802-005C 803-020C 804-015C 118-652D 806-069C 407-468D 817-042C 848-736C 848-536C Image No. DECAL CAUTION GENERAL INSTR DECAL DANGER ELECTROCUTION HA DECAL CAUTION OPERATIONAL MACH DECAL WARNING 20 MPH TRANS SML DECAL DANGER CRUSH TRCTR & 3PT DECAL WARNING HIGH PRESSUR LRG DECAL GP&LOGO HARVEST/3X20 STR DECAL REFLECTOR AMBER 1 1/2X9 DECAL REFLECTR DAYTIME 1 1/2X9 DECAL REFLECTOR RED 1 1/2X9 DECAL CAUTION TRANSP. LOCK DECAL NP4000 DECAL GP PLANTING COMPONENTS DECAL WARNING TOWING DECAL AG CHEMICALS DANGER MANUAL PAK 2 1/4 THK NUT LOCK 1/2-13 PLAIN HHCS 1/4-20X1 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT MANUAL PAK MOUNT U-BOLT 1/2-13 X 4 1/32 X 7 1/4 DECAL MOUNT MINI END WHEEL PRESS WHEEL DECAL APPLICATOR CAUTION LIST DECAL NUTRI-PRO 09/16/14-79 - 407-776P
Table of Contents The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page 115606-91...73 115607-91...73 115627-01...73 115628-01...73 115631-01...57, 73 115688...73 115979-01...73 118-652D...79 119-278D...10 119-300D...27, 29 120-188D...59 120-269S...59 120-290D...59 121-166D...59 136-016D...59 136-126D...59 14705581...29 14705582...29 149-223H...37 149-553D...27, 29 149-558D...37 149-559D...37 149-584D...37, 39 152-498D...45 153-053D...59 160-628D...19 160-629D...19 160-630D...19 161-231D...31 188-006V...59 188-007V...39 196-142H...31 196-430D...43, 45 196-654D...31 1M7016-ADI...51 1M7021-ADI...49, 53 200-001D...37 200-039V...37 204-026D...37 204-198D...39 204-198H...37 204-379S...37 204-434H...37 204-664H...37 204-687H...37 204-688H...37 207-001D...39 207-002D...39 207-004D...39 207-005D...39 207-009S...39 207-011D...39 207-012K...39 207-013D...39 207-013K...39 207-247H...39 207-248H...39 207-250H...39 249-002D...37 249-003D...37 266-012D...31 266-020D...31 2A0014...51 2A0018...49, 53 2A0024...49, 51, 53 2A0040...53 2A0134...32, 49, 51, 53 2A0434...53 2M4418...51 2S6570...49, 53 343080...17 3R1412...51 3R5412...49, 53 40160...71 402-172H...31 404-027D...39 407-227S...59 407-229H...59 407-273H...21 407-277H...31 407-281H...31 407-283H...59 407-297H...59 407-304H...21 407-327D...59 407-329H...59 407-333D...57, 59 407-373S...67 407-408D...59 407-426D...59 407-427D...59 407-462D...31 407-468D...79 407-473D...59 407-511D...69 407-513D...65 407-519D...67 407-520D...41 407-579H...57 407-580H...7 407-583H...7 407-584H...35 407-585H...35 407-594S...17 407-617H...9 407-618S...21 407-619H...21 407-620H...21, 23, 25 407-638H...61 407-717D...35 407-720D...61 407-721D...27, 29 407-721H...21 407-723H...7, 9 407-725D...27, 29 407-726D...27, 29 407-731H...9 407-732H...9 407-733H...9 407-734H...9 407-735H...9 407-738H...9 407-739H...15 407-742H...31 407-743H...31 407-747H...31 407-749K...15 407-750H...15 407-752H...7 407-753K...67 407-755K...67 407-756K...67 407-757K...67 407-758K...67 407-759D...69 407-759K...67 407-762K...67 407-766D...9 407-767D...9 407-780H...7 407-865D...31 407-866D...31 407-874D...9 407-876D...67 407-877D...67 407-878D...67 407-878H...31 407-879D...67 407-879H...31 407-880D...67 407-881D...67 407-884D...27, 29 407-885D...67 407-885K...15 407-886D...67 407-887D...35 407-888D...15 407-905D...9 407-906H...9 407-913H...10 407-914H...10 407-969H...13 407-971H...10 407-972H...37 407-991D...19 407-992S...59 407-994D...10 407-999D...53 40930...71 40950...71 41120...71 41255...71 41448...71 417-002H...9 417-003H...9 417-004H...9 417-005H...9 417-006H...37 417-023D...37 417-033D...67 417-034D...67 417-104D...32 417-318H...23 417-390H...23, 25 417-406H...15 417-407H...31 417-408H...25 417-420S...23, 25 41875...71 4M4108...51 4M6108...49, 53 502-060D...61 502-068D...43, 45, 47 502-174D...61 507-034V...61 507-039D...61 507-040D...61 507-110A...71 548-001S...69 548-002S...43, 45 566-240D...9 566-241D...9 586-243H...9 596-065K...35 596-146S...35 596-147H...35 596-230D...35 599-011H...17 5M4118...51 5M6132...49, 53 6R1164-ADI...51 6R5162-ADI...49, 53 7M4318...51 7M6332...49, 53 800-001C...31, 37, 59 800-038C...59 800-058C...31 800-123C...65, 67 800-125C...63, 69 800-130C...27, 29 800-147C...29 800-164C...37, 39 800-177C...9, 37 800-208C...69 800-211C...37 800-259C...61, 65 800-390C...67 800-449C...27, 29 800REKIT...21 801-018C...27, 29 801-071C...61 801-073C...29 801-083C...37 801-167C...39 802-004C...27, 29 802-005C...79 802-007C...43, 45, 47 802-013C...31 802-014C...10, 27, 29 802-017C...9 802-022C...57, 69 802-023C...31, 49, 51, 53 802-034C...31, 61 802-039C...29 802-041C...57, 59 802-048C...59 802-053C...13, 37 802-055C...9, 35 802-064C...35 802-067C...31 802-069C...15 802-070C...10 802-074C...21, 23, 25 802-078C...39, 65 802-079C...59 802-082C...37, 59 802-086C...35 802-091C...9, 19 802-092C...27, 29 802-096C...15, 21 802-103C...7 802-106C...59 802-128C...21 802-139C...27 802-149C...39 802-152C...9 802-155C...39 802-159C...61 802-167C...27 802-169C...21, 23, 25 802-182C...31 802-184C...39 802-192C...9 802-214C...37 802-216C...41 802-226C...19 802-262C...35 802-282C...59 802-301C...75 802-331C...59 407-776P - 80-09/16/14