Proveedor Integral de Soluciones para la Industria

Desde96 Proveedor Integral de Soluciones para la Industria

Vías uso general ASCO cuenta con la más amplia gama de válvulas solenoides de usos generales, en,, 4, y 5 vías, para el manejo de fluidos tales como agua, aire, gases inertes, gases combustibles, amonia, queroseno, etc. Nuestros productos son ampliamente usados y conocidos en industrias como la farmacéutica, alimentos y bebidas, industria de procesos, etc. Siempre ofreciendo la máxima confianza y funcionalidad a nuestros clientes. Vías Uso General

4 Direct Acting General Service Solenoid Valves Brass or Stainless Steel Bodies /8" to /" NPT / 800 85 Features Designed for high flow and high pressure service Direct acting, requires no minimum operating pressure Choice of metal seating materials to handle aggressive fluids, or resilient seating for airtight shutoff Ideal for power plants and similar applications % ) -WAY Construction Valve Parts in Contact with Fluids Body Brass 04 Stainless Steel Disc 0 Stainless Steel (Metal), PA, or Brass (Resilient) Seats NBR, Phosphor Bronze 0 Stainless Steel Core Tube Core and Plugnut 05 Stainless Steel 40F Stainless Steel Springs 0 Stainless Steel, 7-7PH, or Iconel Shading Coil Copper Silver Gaskets NBR PTFE NC NO Electrical U Watt Rating and Power Consumption Spare Coil Part Number Standard Coil and AC General Purpose Explosionproof Class of DC Watts Watts VA Holding VA Inrush AC DC AC DC F - 0. 4 40 760-764 - H 6. 8 60 0 45 84 45 84 H - 6. 5 80 780-784 - H - 8. 50 85 495-495 - Standard Voltages: 4, 0, 40, 480 volts AC, 60 Hz (or 0, 0 volts AC, 50 Hz). 6,, 4,0, 40 volts DC. Must be specified when ordering. (Note: 4 volt AC, 60 Hz not available with 8. watt coil) Note: 5 and 50 volts DC are battery voltages applied in power plants. Special AC and DC constructions are available to pilot power plant control valves. Consult your local ASCO sales office for details. Solenoid Enclosures Standard: RedHat II - Watertight, Types,,, S, 4, and 4X; RedHat - Type. Optional: RedHat II - Explosionproof and Watertight, Types, S, 4, 4X, 6, 6P, 7, and 9; RedHat - Explosionproof and Watertight, Types, 4, 4X, 7, and 9. See footnote on next page. (To order, add prefix EF to catalog number.) See Optional Features Section for other available options. 800_85R Nominal Ambient Temp. Ranges: Class F Coils AC: F to 5 F (0 C to 5 C) Class H Coils AC: F to 40 F (0 C to 59 C) Class H Coils DC: F to 77 F (0 C to 5 C) (04 F/40 C occasionally) Refer to Engineering Section for details. Approvals CSA certified (800 Series only). Meets applicable CE directives. Refer to Engineering Section for details. 4

/ 800 85 4 -WAY Specifications (English units) Pipe Orifice Cv Flow Factor METAL SEATS AND DISCS Operating Pressure Differential (psi) Air-Inert Gas, Water, Lt. Oil Max. AC Max. DC Max. Fluid Temp. F Brass Body NC/NO Univ. NC/NO Univ. AC DC Catalog Number Stainless Steel Body Add Suffix "F" for NC, "G" for NO, "U" for Univ. Ref. Catalog Number Watt Rating/ Class of Coil Ref. AC DC /8 /8. - - 50 5-80 800D055 - - - 6./H /8 /8. 550 00 - - 00-800G055 - - 0./F - /8 /6.5 - - 5 60-80 800D00 - - - 6./H /8 /6.5 50 50 - - 00-800G00 - - 0./F - /4 /6.5 - - 5 60-80 800D058 - - - 6./H /4 /6.5 50 50 - - 00-800G058 - - 0./F - /4 /4.45 - - 75 5-80 800A08 - - - 6./H /4 /4.45 90 90 - - 00-800G08 - - 0./F - /4 /4.45 50 0 - - 00-800D06 ➁ - - 8/H - /8 /4.45 - - 50 5-80 - - 800B40-6./H /8 /4.45 50 75 - - 00 - - - 800G40 0./F - /8 /4.45 - - 75 5-80 800A08 - - - 6./H /8 /4.45 90 90 - - 00-800G08 - - 0./F - /8 /4.45 50 0 - - 00-800D009 ➁ - - 8/H - /8 /4.45 75 85 - - 00 - - - 800B4 ➁ 8/H - /8 5/6.75 - - 40 0-80 800D064 800B4-6./H /8 5/6.75 0 60 - - 00-800G064 800G4 0./F - /8 /8.00 - - 0 5-80 800D07 800B4-6./H /8 /8.00 75 5 - - 00-800G07 800G4 0./F - / 5/6.75 - - 40 0-80 800D068 800B40-6./H / 5/6.75 0 60 - - 00-800G068 800G40 0./F - / /8.00 - - 0 5-80 800D076 800B404-6./H / /8.00 75 5 - - 00-800G076 800G404 0./F - NBR SEATS AND BRASS DISCS /4 /6.5 - - 5 60-80 800D058R - - - 6./H /4 /6.5 50 50 - - 80-800G058R - - 0./F - /4 /4.9 - - 75 5-80 800A08R - - - 6./H /4 /4.9 50 75 - - 80-800G08R - - 0./F - /8 /4.9 - - 75 5-80 800A08R - - - 6./H /8 /4.9 50 75 - - 80-800G08R - - 0./F - /8 5/6.5 - - 40 0-80 800D064R - - - 6./H /8 5/6.5 0 60 - - 80-800G064R - - 0./F - / 5/6.5 - - 40 0-80 800D068R - - - 6./H / 5/6.5 0 60 - - 80-800G068R - - 0./F - PHOSPHOR BRONZE SEATS - STEAM SERVICE ONLY /4 /4.45 00 50 - - 44-85G00 - - 6./H - /8 /4.45 00 50 - - 44-85G00 - - 6./H - /8 5/6.75 05 50 - - 44-85 04 ➂ 4 - - 8./H - / 5/6.75 05 50 - - 44-85 05 ➂ 4 - - 8./H - NC = Normally Closed: Exhaust pressure when de-energized. NO = Normally Open: Applies pressure when de-energized. Univ. = Universal: Pressure at any port. ➁ "EF" Prefix variations are suitable for enclosures Types, 4, 7 (C&D), and 9 (E) only and have a temperature range code TA. Refer to Engineering Section for details. ➂ Not available with 4 volt, 60 Hz coil. 4 800_85R

4 / 800 85 Specifications (Metric units) Pipe Orifice (mm) Kv Flow Factor (m/h) METAL SEATS AND DISCS Operating Pressure Differential (bar) Air-Inert Gas, Water, Lt. Oil Max. AC Max. DC Max. Fluid Temp. C Brass Body NC/NO Univ. NC/NO Univ. AC DC Catalog Number Stainless Steel Body Add Suffix "F" for NC, "G" for NO, "U" for Univ. Ref. Catalog Number Watt Rating/ Class of Coil Ref. AC DC /8. - - 7 9-8 800D055 - - - 6./H /8. 8 - - 9-800G055 - - 0./F - /8 5.0 - - 9 4-8 800D00 - - - 6./H /8 5.0 7 0 - - 9-800G00 - - 0./F - /4 5.0 - - 9 4-8 800D058 - - - 6./H /4 5.0 7 0 - - 9-800G058 - - 0./F - /4 6.9 - - 5-8 800A08 - - - 6./H /4 6.9 6 - - 9-800G08 - - 0./F - /4 6.9 7 8 - - 9-800D06 ➁ - - 8/H - /8 6.9 - - - 8 - - 800B40-6./H /8 6.9 0 5 - - 9 - - - 800G40 0./F - /8 6.9 - - 5-8 800A08 - - - 6./H /8 6.9 6 - - 9-800G08 - - 0./F - /8 6.9 7 8 - - 9-800D009 ➁ - - 8/H - /8 6.9 6 - - 9 - - - 800B4 ➁ 8/H - /8 8.64 - - - 8 800D064 800B4-6./H /8 8.64 8 4 - - 9-800G064 800G4 0./F - /8 0.86 - - - 8 800D07 800B4-6./H /8 0.86 5 - - 9-800G07 800G4 0./F - / 8.64 - - - 8 800D068 800B40-6./H / 8.64 8 4 - - 9-800G068 800G40 0./F - / 0.86 - - - 8 800D076 800B404-6./H / 0.86 5 - - 9-800G076 800G404 0./F - NBR SEATS AND BRASS DISCS /4 5. - - 9 4-8 800D058R - - - 6./H /4 5. 7 0 - - 8-800G058R - - 0./F - /4 6. - - 5-8 800A08R - - - 6./H /4 6. 0 5 - - 8-800G08R - - 0./F - /8 6. - - 5-8 800A08R - - - 6./H /8 6. 0 5 - - 8-800G08R - - 0./F - /8 8.45 - - - 8 800D064R - - - 6./H /8 8.45 8 4 - - 8-800G064R - - 0./F - / 8.45 - - - 8 800D068R - - - 6./H / 8.45 8 4 - - 8-800G068R - - 0./F - PHOSPHOR BRONZE SEATS - STEAM SERVICE ONLY /4.5.9 7 - - 7-85G00 - - 6./H - /8.5.9 7 - - 7-85G00 - - 6./H - /8.6.64 7 - - 7-85 04 ➂ 4 - - 8./H - /.6.64 7 - - 7-85 05 ➂ 4 - - 8./H - -WAY NC = Normally Closed: Exhaust pressure when de-energized. NO = Normally Open: Applies pressure when de-energized. Univ. = Universal: Pressure at any port. ➁ "EF" Prefix variations are suitable for enclosures Types, 4, 7 (C&D), and 9 (E) only and have a temperature range code TA. Refer to Engineering Section for details. ➂ Not available with 4 volt, 60 Hz coil. 800_85R 4

/ 800 85 4 -WAY Dimensions: inches (mm) Ref. H K L P R S W T ins. 4.89.44 4.44.46.4.60.0.44 mm 4 7 6 4 40 84 7 ins. 5.9.88 4.44.7.66.00.0.88 mm 50 48 60 4 5 84 48 ins. 5.90.88 4.6.7.66.00.55.88 mm 50 48 7 60 4 5 90 48 4 ins. 4.89.44 4.44.46.4.60.0.44 mm 4 7 6 4 40 84 7 IMPORTANT: Valves must be mounted vertical and upright. Flow Diagrams Normally Closed (Suffix "F") De-energized SOL PRESS. CYL. CYL. EXH. Energized SOL PRESS. EXH. Ref.,,, 4 Normally Open (Suffix "G") De-energized Energized SOL SOL EXH. EXH. CYL. PRESS. CYL. PRESS. De-energized Universal (Suffix "U") Energized SOL SOL 44 800_85R

4 Direct Acting General Service Solenoid Valves Brass or Stainless Steel Bodies /8" and /4" NPT / 84 Features No minimum operating pressure required The original -way valve design Simplest valve for basic -way piloting operation, only a spring and two moving parts Moderate flow pilots, smaller control valves and actuators Can also be used for low-volume fluid diversion High speed general service % ^ ) -WAY Construction Valve Parts in Contact with Fluids Body Brass Cast 04 Stainless Steel Seals and Discs Nitrile (Upper Disk - FKM) Core Tube 05 Stainless Steel Core and Plugnut 40F Stainless Steel Core Springs 0 Stainless Steel Shading Coil Copper Silver Core Guide POM NC NO U Electrical Standard Coil and Class of Watt Rating and Power Consumption Spare Coil Part Number AC General Purpose Explosionproof DC Watts Watts VA Holding VA Inrush AC DC AC DC F.6 0. 5 50 860 870 864 874 Standard Voltages: 4, 0, 40, 480 volts AC, 60 Hz (or 0, 0, 440 volts AC, 50 Hz). 6,, 4, 0, 40 volts DC. Must be specified when ordering. Other voltages are available when required. Solenoid Enclosures Standard: Watertight, Types,,, S, 4, and 4X. Optional: Explosionproof and Watertight, Types, S, 4, 4X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number.) See Optional Features Section for other available options. Options Mounting bracket (suffix MB) Quarter-turn manual operator with screw slot (suffix MS) FKM (suffix V) Oxygen (suffix N) Silicon Free (suffix SF) Nominal Ambient Temp. Ranges The nominal limitation of F (0 C) is advisable for any valve that might contain moisture (water vapor). AC: - F to F (-5 C to 55 C)* DC: - F to F (-5 C to 55 C) *Max. ambient for explosionproof (EF/EV) is 5 F (5 C) Optional: For AC, the max. ambient temperature is 40 F (60 C) with Class H coil (with or without prefix EF/EV) Refer to Engineering Section for details. Approvals CSA certified. UL listed General Purpose Valves. Meets applicable CE directives. SIL capable per IEC 6508 on normally closed const. Third party certification provided by EXIDA. Refer to Engineering Section for details. 45

/ 84 4 -WAY Specifications (English units) Pipe (in) Orifice (in) Cv Flow Factor - Cv Flow Factor - Air-Inert Gas Universal Operation (Pressure at any port) Operating Pressure Differential (psi) Max. AC Water Light Oil @ 45 SSU Air-Inert Gas Max. DC Max. Fluid Temp. F Brass Body Stainless Steel Body Watt Rating/ Class of Coil Light Oil Catalog Catalog Water @ 45 SSU AC DC Number Ref. Number Ref. AC DC /8 /64 0.05 0.06 00 00 00 00 00 00 00 00 84H04 84H04 0./F.6/F /8 / 0.5 0.0 05 85 60 05 85 60 00 00 84H04 84H044 0./F.6/F /8 /8 0.5 0.0 70 70 40 55 45 45 00 00 84H045 84H040 0./F.6/F /4 /64 0.05 0.06 00 00 00 00 00 00 00 00 84H006 84H 0./F.6/F /4 / 0.5 0.0 05 85 60 05 85 60 00 00 84H007 84H0 0./F.6/F /4 /8 0.5 0.0 70 70 40 55 45 45 00 00 84H008 84H4 0./F.6/F /4 5/ 0.50 0.0 5 5 5 5 5 5 00 00 84H7 84H7 0./F.6/F /4 7/ 0.70 0.0 8 8 8 00 00 84H8 84H8 0./F.6/F /4 9/ 0.85 0.0 0 0 0 8 8 8 00 00 84H9 84H9 0./F.6/F Normally Closed (Closed when de-energized) PFDAVG = 4.77 x 0-4 /8 /64 0.05 0.06 00 00 00 50 50 50 00 00 84H0 84H07 0./F.6/F /8 / 0.5 0.0 05 05 90 50 0 90 00 00 84H0 84H08 0./F.6/F /8 /8 0.5 0.0 45 45 00 90 90 70 00 00 84H0 84H09 0./F.6/F /4 /64 0.05 0.06 00 00 00 50 50 50 00 00 84H04 84H068 0./F.6/F /4 / 0.5 0.0 05 05 90 50 0 90 00 00 84H05 84H 0./F.6/F /4 /8 0.5 0.0 45 45 00 90 90 70 00 00 84H06 84H6 0./F.6/F /4 5/ 0.50 0.0 75 75 75 50 50 50 00 00 84H0 84H0 0./F.6/F /4 7/ 0.70 0.0 40 40 40 5 5 5 00 00 84H 84H 0./F.6/F /4 9/ 0.85 0.0 5 5 5 5 5 5 00 00 84H 84H 0./F.6/F Normally Open (Open when de-energized) /8 /64 0.05 0.06 00 00 00 50 50 50 00 00 84H049 84H055 0./F.6/F /8 / 0.5 0.0 75 75 75 60 60 60 00 00 84H050 84H056 0./F.6/F /8 /8 0.5 0.0 60 60 60 50 50 0 00 00 84H05 84H057 0./F.6/F /4 /64 0.05 0.06 00 00 00 50 50 50 00 00 84H05 84H069 0./F.6/F /4 / 0.5 0.0 75 75 75 60 60 60 00 00 84H05 84H 0./F.6/F /4 /8 0.5 0.0 60 60 60 50 50 0 00 00 84H054 84H070 0./F.6/F /4 5/ 0.50 0.0 50 50 50 65 60 60 00 00 84H 84H 0./F.6/F /4 7/ 0.70 0.0 00 00 00 5 5 5 00 00 84H4 84H4 0./F.6/F /4 9/ 0.85 0.0 65 65 65 5 5 5 00 00 84H5 84H5 0./F.6/F Maximum fluid temperature for light oil @ 45 SSU is 80 F. 46

4 / 84 Specifications (Metric units) Pipe (in) Orifice (mm) Kv Flow Factor (m /h) - Kv Flow Factor (m /h) - Air-Inert Gas Universal Operation (Pressure at any port) Operating Pressure Differential (bar) Max. AC Water Light Oil @ 45 SSU Air-Inert Gas Max. DC Max. Fluid Temp. C Brass Body Stainless Steel Body Watt Rating/ Class of Coil Light Oil Catalog Catalog Water @ 45 SSU AC DC Number Ref. Number Ref. AC DC /8. 0.04 0.05 4 4 4 4 4 4 9 9 84H04 84H04 0./F.6/F /8.4 0. 0.7 7 6 4 7 6 4 9 9 84H04 84H044 0./F.6/F /8. 0. 0.7 5 5 4 9 9 84H045 84H040 0./F.6/F /4. 0.04 0.05 4 4 4 4 4 4 9 9 84H006 84H 0./F.6/F /4.4 0. 0.7 7 6 4 7 6 4 9 9 84H007 84H0 0./F.6/F /4. 0. 0.7 5 5 4 9 9 84H008 84H4 0./F.6/F /4 4.0 0.4 0.7.5.5.5 9 9 84H7 84H7 0./F.6/F /4 5.6 0.60 0.7.5.5.5 9 9 84H8 84H8 0./F.6/F /4 7. 0.7 0.7 0.7 0.7 0.7 0.6 0.6 0.6 9 9 84H9 84H9 0./F.6/F Normally Closed (Closed when de-energized) PFDAVG = 4.77 x 0-4 /8. 0.04 0.05 7 7 7 9 9 84H0 84H07 0./F.6/F /8.4 0. 0.7 4 4 0 8 6 9 9 84H0 84H08 0./F.6/F /8. 0. 0.7 0 0 7 6 6 5 9 9 84H0 84H09 0./F.6/F /4. 0.04 0.05 7 7 7 9 9 84H04 84H068 0./F.6/F /4.4 0. 0.7 4 4 0 8 6 9 9 84H05 84H 0./F.6/F /4. 0. 0.7 0 0 7 6 6 5 9 9 84H06 84H6 0./F.6/F /4 4.0 0.4 0.7 5. 5. 5..5.5.5 9 9 84H0 84H0 0./F.6/F /4 5.6 0.60 0.7 9 9 84H 84H 0./F.6/F /4 7. 0.7 0.7 9 9 84H 84H 0./F.6/F Normally Open (Open when de-energized) /8. 0.04 0.05 7 7 7 9 9 84H049 84H055 0./F.6/F /8.4 0. 0.7 9 9 84H050 84H056 0./F.6/F /8. 0. 0.7 0 0 8 9 9 84H05 84H057 0./F.6/F /4. 0.04 0.05 7 7 7 9 9 84H05 84H069 0./F.6/F /4.4 0. 0.7 9 9 84H05 84H 0./F.6/F /4. 0. 0.7 0 0 8 9 9 84H054 84H070 0./F.6/F /4 4.0 0.4 0.7 0 0 0 4.5 4. 4. 9 9 84H 84H 0./F.6/F /4 5.6 0.60 0.7 6.8 6.8 6.8.5.5.5 9 9 84H4 84H4 0./F.6/F /4 7. 0.7 0.7 4.5 4.5 4.5 9 9 84H5 84H5 0./F.6/F Maximum fluid temperature for light oil @ 45 SSU is 8 C. -WAY 47

/ 84 4 -WAY Dimensions: inches (mm) Ref. Ref. /8 PIPE THREAD.06 [78].06 [5] CONDUIT /" NPT.95 [50] /8 PIPE THREAD.06 [78].06 [5] CONDUIT /" NPT.95 [50].7 [44].78 [7].09 [78].80 [46].87 [7]. [8] /8 PIPE THREAD.9 [0].9 [0] ( PLACES) /4 PIPE THREAD.56 [40] ( PLACES).9 [].0 [7.6].59 [5].4 [8.7].87 [].69 [8].87 [] M5 THREAD.0 [7.6] MIN.FULL THREAD DEPTH HOLES FOR MOUNTING M5 THREAD.0 [7.6] MIN. FULL THREAD DEPTH HOLES FOR MOUNTING Flow Diagrams UNIVERSAL CONST. Pressure at any Port NORMALLY CLOSED CONST. Pressure at NORMALLY OPEN CONST. Pressure at Energized De-energized Energized De-energized Energized De-energized 48

4 Pilot Operated Air and Water Solenoid Valves Brass Body /8" to " NPT / 86 Features Diaphragm poppet valves suitable for controlling air, inert gas, and liquids Internal piloting controls large orifices to provide high flows Can be used to pilot large actuators to provide quick closing of large control valves Resilient seating for tight shutoff Mountable in any position % ) -WAY Construction Valve Parts in Contact with Fluids Body Brass Seals and Disc Diaphragm Assembly Core Tube NBR NBR 05 Stainless Steel NC E P A Core and Plugnut 40F Stainless Steel NO Core Springs 0 Stainless Steel and 7-7PH Stainless Steel Shading Coil Copper Pilot Seat Cartridge and Disc-Holder CA Electrical Standard Coil and Class of Watt Rating and Power Consumption Spare Coil Part Number DC AC VA VA General Purpose Explosionproof Watts Watts Holding Inrush AC DC AC DC F 0.6 6. 6 0 80 80 84 84 F.6 7. 40 70 860 870 864 874 Standard Voltages: 4, 0, 40, 480 volts AC, 60 Hz (or 0, 0 volts AC, 50 Hz). 6,, 4, 0, 40 volts DC. Must be specified when ordering. Other voltages available when required. Solenoid Enclosures Standard: Watertight, Types,,, S, 4, and 4X. Optional: Explosionproof and Watertight, Types, S, 4, 4X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number.) See Optional Features Section for other available options. 86R Nominal Ambient Temp. Ranges AC: F to 5 F (0 C to 5 C) DC: F to 04 F (0 C to 40 C) Refer to Engineering Section for details. Approvals CSA certified. Meets applicable CE directives. Refer to Engineering Section for details. Important A minimum operating pressure differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted. ASCO flow controls and other similar components must be installed in the cylinder lines only. 49

/ 86 4 -WAY Specifications (English units) Pipe Orifice Cv Flow Factor Operating Pressure Differential (psi) Max. AC Air-Inert Min. Gas NORMALLY CLOSED (Closed when de-energized) Water Max. DC Max. Fluid Temp. F Brass Body Watt Rating/ Class of Coil Air-Inert Gas Water AC DC Catalog Number Ref. AC DC /8 5/8.5 0 50 5 5 5 80 0 86G054 6./F 0.6/F /8 5/8.5 0 50 50 50 50 80 0 86G04 7./F.6/F / 5/8. 0 50 5 5 5 80 0 86G064 6./F 0.6/F / 5/8. 0 50 50 50 50 80 0 86G04 7./F.6/F /4 /6 4.8 0 50 5 5 5 80 0 86G074 6./F 0.6/F /4 /6 4.8 0 50 50 50 50 80 0 86G044 4 7./F.6/F.5 0 50 5 5 5 80 0 86G04 5 6./F 0.6/F NORMALLY OPEN (Open when de-energized) /8 5/8.5 0 50 5 5 5 80 0 86G056 6./F 0.6/F /8 5/8.5 0 50 50 50 50 80 0 86G06 7./F.6/F / 5/8. 0 50 5 5 5 80 0 86G066 6./F 0.6/F / 5/8. 0 50 50 50 50 80 0 86G06 7./F.6/F /4 /6 4.8 0 50 5 5 5 80 0 86G076 6./F 0.6/F /4 /6 4.8 0 50 50 50 50 80 0 86G046 4 7./F.6/F.5 0 50 5 5 5 80 0 86G06 5 6./F 0.6/F 0 psi Minimum Operating Pressure Differential required. Valve vents to "zero" psi. On 50 hertz service, the watt rating for 6./F solenoid is 8. watts. Specifications (Metric units) Pipe Orifice (mm) Kv Flow Factor (m/h) Operating Pressure Differential (bar) Max. AC Air-Inert Min. Gas NORMALLY CLOSED (Closed when de-energized) Water Max. DC Max. Fluid Temp. C Brass Body Watt Rating/ Class of Coil Air-Inert Gas Water AC DC Catalog Number Ref. AC DC /8 6. 0.7 0 9 9 9 8 49 86G054 6./F 0.6/F /8 6. 0.7 7 7 7 7 8 49 86G04 7./F.6/F / 6.7 0.7 0 9 9 9 8 49 86G064 6./F 0.6/F / 6.7 0.7 7 7 7 7 8 49 86G04 7./F.6/F /4 7 4. 0.7 0 9 9 9 8 49 86G074 6./F 0.6/F /4 7 4. 0.7 7 7 7 7 8 49 86G044 4 7./F.6/F 5 0.7 0 9 9 9 8 49 86G04 5 6./F 0.6/F NORMALLY OPEN (Open when de-energized) /8 6. 0.7 0 9 9 9 8 49 86G056 6./F 0.6/F /8 6. 0.7 7 7 7 7 8 49 86G06 7./F.6/F / 6.7 0.7 0 9 9 9 8 49 86G066 6./F 0.6/F / 6.7 0.7 7 7 7 7 8 49 86G06 7./F.6/F /4 7 4. 0.7 0 9 9 9 8 49 86G076 6./F 0.6/F /4 7 4. 0.7 7 7 7 7 8 49 86G046 4 7./F.6/F 5 0.7 0 9 9 9 8 49 86G06 5 6./F 0.6/F bar Minimum Operating Pressure Differential required. Valve vents to "zero" bar. On 50 hertz service, the watt rating for 6./F solenoid is 8. watts. 50 86R

4 / 86 Dimensions: inches (mm) -WAY Ref. H K L P ins. 5.08.08.76.94 mm 9 78 70 00 ins. 5.6.5.76 4. mm 4 80 70 05 Ref., 86R 5

/ 86 4 -WAY Dimensions: inches (mm) Ref. A B C H K L M N P R W ins..6.4.66 6.0.46.8.6.5 4..50. mm 4 6 4 5 88 86 55 0 84 4 ins..6.4.66 6.9.5.8.6.5 4.50.50. mm 4 6 4 57 90 86 55 4 84 5 ins. X.80 X 6.6.7 4.44.8.88 4.57.74 5. mm X 46 X 68 94 7 6 44 5 Ref., 4, 5 FLOW DIAGRAMS De-Energized Normally Closed Energized De-Energized Normally Open Energized 5 86R

4 Air Piloted Spring Return Shutdown System Zero Minimum Solenoid Valves Brass or Stainless Steel Bodies Air and Inert Gas /4" to /" NPT / 86 Features Brass body construction for general atmospheres; stainless steel for corrosive atmospheres Can be internally piloted, or externally piloted to convert valve to zero minimum operation by flipping a gasket When externally piloted, loss of electrical power or auxiliary air exhausts air from the actuator and shifts process valve to its original position When internally piloted, loss of electric power returns the valve to its original position Also available with Low Power or Intrinsically Safe solenoids. See Special Service Valve Section % ) -WAY Construction Valve Parts in Contact with Fluids Body Brass 6 Stainless Steel End Plate 04 Stainless Steel 6 Stainless Steel Seals and Discs Low Temp NBR FKM (Suffix V) NC NO E P A Core Tube 05 Stainless Steel Core Guide CA Shading Coil Copper Silver Electrical Standard Coil and Class of DC Watts Watt Rating and Power Consumption AC Solenoid Enclosures General Purpose Spare Coil Part Number Explosionproof (EF) Explosionproof (EV) VA VA Watts Holding Inrush AC DC AC DC AC DC F.6 0. 5 50 860 870 764 874 7464 7474 Standard Voltages: 4, 0, 40, 480 volts AC, 60 Hz (or 0, 0 volts, AC, 50 Hz). 6,, 4, 0, 40 volts DC. Must be specified when ordering. Other voltages are available when required. Brass Body Valves: Standard: Watertight, Types,,, S, 4, and 4X. Optional: Explosionproof and Watertight, Types, S, 4, 4X, 6, 6P, 7, and 9. (Add prefix "EF" to catalog number.) Stainless Steel Valves: Standard: Explosionproof and Watertight, Types, S, 4, 4X, 6, 6P, 7, and 9. See Optional Features Section for other available options. Installation All valves may be mounted in any position. 6 Stainless Steel mounting brackets available from ASCO. Add suffix "MB". 86ZeroMinR Nominal Ambient Temp. Ranges Standard Construction: AC: -4 F to 5 F (-0 C to 5 C) DC: -4 F to 04 F (-0 C to 40 C) -40 F on certain models (consult factory) Suffix V Construction: AC: F to 5 F (0 C to 5 C) DC: F to 04 F (0 C to 40 C) Approvals Valves with prefix "EF" or "EV"; UL approved and CSA certified solenoid. Meets applicable CE directives. SIL capable per IEC 6508 on normally closed const. Third party certification provided by EXIDA. 5

/ 86 4 -WAY Specifications (English units) Pipe Orifice CV Flow Factor Min. NORMALLY CLOSED (Closed when de-energized) PFD AVG = 9.0 x 0-4 Specifications (Metric units) Dimensions: inches (mm) Max. Air Press.(psi) Catalog Number Max. Fluid Temp. F Watt Rating/ Class of Coil AC DC Brass Body Stainless Steel Ref. AC DC AC DC /4 5/6.5 ➁ 50 0 86G00 EV86G08V 80 0 0./F.6/F /8 5/6.5 ➁ 50 0 86G00 EV86G08V 80 0 0./F.6/F /8 5/8 4 ➁ 50 0 86G00-80 0 0./F.6/F / 5/8 4 ➁ 50 0 86G004 EV86G084V 80 0 0./F.6/F Consult factory for Normally Open. ➁ Zero minimum when valve selection gasket is in external position and proper auxiliary air pressure is applied. See graph below for pilot line pressure vs. mainline pressure. Minimum 5 psi ( bar) operating pressure differential when selection gasket is in the internal position. IMPORTANT: Internal mode Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area and unrestricted. ASCO flow controls and similar components must be installed in the cylinder lines only. Watt Rating/ Pipe Orifice Kv Flow Max. Air Max. Fluid Class of Coil Factor Press. (bar) Catalog Number Temp. C (mm) (m/h) Min. AC DC Brass Body Stainless Steel Ref. AC DC AC DC NORMALLY CLOSED (Closed when de-energized) PFD AVG = 9.0 x 0-4 /4 8. ➁ 0 8 86G00 EV86G08V 8 49 0./F.6/F /8 8. ➁ 0 8 86G00 EV86G08V 8 49 0./F.6/F /8 6.4 ➁ 0 8 86G00-8 49 0./F.6/F / 6.4 ➁ 0 8 86G004 EV86G084V 8 49 0./F.6/F MAINLINE PRESSURE vs. PILOT LINE PRESSURE WHEN SELECTION GASKET IS IN EXTERNAL POSITION Ref. PILOT LINE PRESSURE (psi) 0 06 90 75 60 45 0 5 0 0 5 0 45 60 75 90 05 0 5 50 MAINLINE PRESSURE (psi) Ref. INTERNAL PILOTING MODE FLOW DIAGRAMS De-Energized Energized PILOT EXH PILOT EXH (main) EXH (main) EXH CYL CYL PRESS PRESS EXTERNAL PILOTING MODE FLOW DIAGRAMS De-Energized with Auxiliary Pressure Applied (main) EXH PILOT EXH AUX Energized with Auxiliary Pressure Applied (main) EXH PILOT EXH AUX CYL CYL PRESS PRESS 54 86ZeroMinR

4 Pilot Operated Quick Exhaust Solenoid Valves Brass or Stainless Steel Bodies /4" and /8" NPT / 87 8 Features Designed for quick venting to 0 psi through the exhaust orifice Resilient seated poppets for tight shutoff Air is exhausted to quickly shift control valves Multi-industry applications Mountable in any position % ^ ) -WAY Construction Valve Parts in Contact with Fluids Body Brass 04 Stainless Steel Seals and Disc NBR (PA upper disc for 87 Series) Diaphragm CR (87 Series only) Core Tube Core and Plugnut Core Springs 05 Stainless Steel 40F Stainless Steel 0 Stainless Steel and 7-7 PH Stainless Steel NC 87 4 8 A E P Shading Coil Copper Silver Pilot Seat Cartridge and Disc-Holder Piston CA (8 Series only) Brass and 0 Stainless Steel (8 only) NO Electrical Standard Coil and Class of Watt Rating and Power Consumption Spare Coil Part Number AC General Purpose Explosionproof DC Watts Watts VA Holding VA Inrush AC DC AC DC F 0.6 6. 6 0 80 80 84 84 F.6 0. 5 50 860 870 864 874 Standard Voltages: 4, 0, 40, 480 volts AC, 60 Hz (or 0, 0 volts AC, 50 Hz). 6,, 4, 0, 40 volts DC. Must be specified when ordering. Other voltages available when required. Solenoid Enclosures Standard: Watertight, Types,,, S, 4, and 4X. Optional: Explosionproof and Watertight, Types, S, 4, 4X, 6, 6P, 7, and 9. (To order, add prefix EF to the catalog number.) See Optional Features Section for other available options. 87_8R 87 Nominal Ambient Temp. Ranges AC: F to 5 F (0 C to 5 C) DC: F to 04 F (0 C to 40 C) Refer to Engineering Section for details. Approvals CSA certified. UL listed General Purpose Valves. Meets applicable CE directives. Refer to Engineering Section for details. Important A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted. ASCO flow controls and other similar components must be installed in the cylinder lines only. 55

/ 87 8 4 -WAY Specifications (English units) Pipe Orifice Cv Flow Factor Max. AC Operating Pressure Differential (psi) Max. DC Max. Fluid Temp. F Brass Body Stainless Steel Body Watt Rating/ Class of Coil ➂ Press. Exh. Press. Exh. Min. Air-Inert Gas Lt. Oil Water @45 SSU Air-Inert Gas Lt. Oil Water @45 SSU AC DC Catalog Number Ref. Catalog Number Ref. AC DC NORMALLY CLOSED (Pressure at Port ) / NORMALLY OPEN (Pressure at Port ) /4 / /4.0.7 5 80 50 50 40 0 5 80 04 87G007 87G008 4 0./F.6/F NORMALLY CLOSED (Closed when de-energized) /4 / /4.0.7 5 50 50 95 75 55 0 80 04 87G05 87G06 4 0./F.6/F /4 9/ /.80. 0 00 00 00 00 00 00 80 0 8G00 - - 6./F 0.6/F /8 9/ /.80. 0 00 00 00 00 00 00 80 0 8G00 - - 6./F 0.6/F NORMALLY CLOSED (Closed when de-energized), Air Only - Vents to Atmosphere /4 / /4.0.7 5 50 - - - - - 80-87G0 87G04 5 0./F - NORMALLY OPEN (Open when de-energized) /4 / /4.5.7 5 60 60 95 75 45 5 80 04 87G05 87G054 4 0./F.6/F /4 9/ /.80. 0 00 00 00 00 00 00 80 0 8G00 - - 6./F 0.6/F /8 9/ /.80. 0 00 00 00 00 00 00 80 0 8G004 - - 6./F 0.6/F Rating for 8 valves established with 00 SSU light oil. Minimum Operating Pressure Differential on light oil is 0 psi. ➂ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. Specifications (Metric units) Pipe Orifice (mm) Kv Flow Factor (m/h) Max. AC Operating Pressure Differential (bar) Max. DC Press. Exh. Press. Exh. Min. Air-Inert Gas Water Lt. Oil @45 SSU Air-Inert Gas Water NORMALLY CLOSED (Pressure at Port ) / NORMALLY OPEN (Pressure at Port ) Max. Fluid Temp. C Brass Body Stainless Steel Body Watt Rating/ Class of Coil ➂ Lt. Oil Catalog Catalog @45 SSU AC DC Number Ref. Number Ref. AC DC /4 6.7.6. 6.7 8 40 87G007 87G008 4 0./F.6/F NORMALLY CLOSED (Closed when de-energized) /4 6.7.6. 0 7 7 5 4 8 40 87G05 87G06 4 0./F.6/F /4 7 9.69.0.7 4 4 4 4 4 4 8 49 8G00 - - 6./F 0.6/F /8 7 9.69.0.7 4 4 4 4 4 4 8 49 8G00 - - 6./F 0.6/F NORMALLY CLOSED (Closed when de-energized), Air Only - Vents to Atmosphere /4 6.7.6. 0 - - - - - 8-87G0 87G04 5 0./F - NORMALLY OPEN (Open when de-energized) /4 6..6. 7 5 8 40 87G05 87G054 4 0./F.6/F /4 7 9.69.0.7 4 4 4 4 4 4 8 49 8G00 - - 6./F 0.6/F /8 7 9.69.0.7 4 4 4 4 4 4 8 49 8G004 - - 6./F 0.6/F Rating for 8 valves established with 00 SSU light oil. Minimum Operating Pressure Differential on light oil is.7 bar. ➂ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. 56 87_8R

4 / 87 8 Dimensions: inches (mm) Ref. H K L P W ins. 4.04.55.05.54.00 mm 0 9 5 90 5 4 ins. 4.0.5.0.5.00 mm 0 9 5 89 5 Ref., 5 -WAY Ref., 4 87_8R 57

/ 87 8 4 -WAY Dimensions: inches (mm) Ref. 58 87_8R

ANSI Accredited Program PRODUCT CERTIFICATION 4 Direct Acting Subminiature Solenoid Valves /8" and /4" NPT / 856 Features -way normally closed, normally open, or universal operation Compact design Brass and 6 stainless steel body constructions Mountable in any position NSF 6 Annex G and 69 version available for potable water and food service % & ) -WAY Construction Valve Parts in Contact with Fluids General Purpose NSF Body Brass 6 Stainless Steel 6 Stainless Steel Core Tube/Bonnet S.S. / Plated Steel S.S. / S.S. S.S. / S.S. Core and Plugnut Stainless Steel Springs Stainless Steel Seals and Disc FKM EPDM Shading Coil Copper Copper Electrical Watt Rating and Power Consumption Standard Coil and AC Spare Coil Class of DC VA VA Ambient Family Prefix Watts Watts Holding Inrush Temp. F AC DC U F 6.9 6. 8.8. 5 to 40 4007 4007 SC F 6.9 6. 8.8. 5 to 40 4007 4007 Standard voltages: 4,0, 40 volts AC, 50-60 Hz., 4, 0 volts DC Must be specified when ordering. NC NO U Solenoid Enclosures Standard: Open frame (Prefix U) 8" leads Optional: DIN (size mm, form B) (Prefix SC). Watertight/IP-65 when used with DIN connector kit for SC coils (see kits below). Kits /" NPT conduit hub kit for leaded coils 475-00-* (Kit contains 0 pcs of each: threaded hub, gasket, and attaching screw.) DIN connector kit for SC coils 606-00-* (Kit contains 0 pcs of each: connector, gasket, and attaching screw.) Mounting adapter kit 8979 (Kit contains screws and plate.) M5 to /8" port adaptors: HV8966600 (Brass), HV8966700 (SS) (Kit contains 0 pcs) Approvals UL recognized coil - File E569 CSA certified coil - see CSA certificate No. Meets applicable CE directives NSF (Designated models only, see table) NSF 6 - Drinking water system components NSF 69 - Special purpose food Equipment and Devices Also certified to NSF/ANSI Standard 6, Annex G (weighted average lead content of <=0.5%) and is in compliance with California's Health & Safety Code Section 6875 (commonly known as AB95) and Vermont Act 9. The NSF Certification Program is accredited by the Standards Council of Canada and ANSI. 65

/ 856 4 -WAY Specifications (English units) Pipe (in) Orifice (in) At Port Cv Flow At Port General Service - Normally Closed Air - Inert Gas Operating Pressure Differential (psi) Max. AC Max. DC Max. Fluid Light Oil Air - Inert Light Oil Temp. F Wattage Water @ 00 SSU Gas Water @ 00 SSU AC DC Brass Stainless Steel Ref. AC DC /8 /64 0.06 0.06 5 5 5 5 5 5 80 80 U856A00V U856A0V 6. 6.9 0.5 /8 /6 0.09 0.06 45 45 45 45 45 45 80 80 U856A00V U856A04V 6. 6.9 0.5 /8 / 0. 0.06 60 60 60 60 60 60 80 80 U856A004V U856A06V 6. 6.9 0.5 /8 7/64 0.5 0.06 5 5 5 5 5 5 80 80 U856B045V U856B046V 6. 6.9 0.6 NSF 6 and 69 Listed - Normally Closed /8 / 0. 0.04-70 - - 70-80 80 - U856A0E 6. 6.9 0.5 /4 / 0. 0.04-70 - - 70-80 80 - U856A5E 6. 6.9 0.5 General Service - Normally Open /8 /64 0.06 0.06 5 5 5 5 5 5 80 80 U856A005V U856A07V 6. 6.9 0.5 /8 /6 0.09 0.06 5 5 5 5 5 5 80 80 U856A006V U856A08V 6. 6.9 0.5 /8 / 0. 0.06 5 5 5 85 85 85 80 80 U856A008V U856A00V 6. 6.9 0.5 /8 7/64 0.5 0.06 75 75 75 0 0 0 80 80 U856B054V U856B055V 6. 6.9 0.6 NSF 6 and 69 Listed - Normally Open /8 / 0. 0.04-40 - - 85-80 80 - U856A07E 6. 6.9 0.5 /4 / 0. 0.04-40 - - 85-80 80 - U856A9E 6. 6.9 0.5 General Service - Universal /8 /64 0.06 0.06 00 00 00 00 00 00 80 80 U856A009V U856A0V 6. 6.9 0.5 /8 /6 0.09 0.06 65 65 65 65 65 65 80 80 U856A00V U856A0V 6. 6.9 0.5 /8 / 0. 0.06 0 0 0 0 0 0 80 80 U856A0V U856A04V 6. 6.9 0.5 /8 7/64 0.5 0.06 5 5 5 5 5 5 80 80 U856B047V U856B048V 6. 6.9 0.6 NSF 6 and 69 Listed - Universal /8 / 0. 0.04-5 - - 5-80 80 - U856AE 6. 6.9 0.5 /4 / 0. 0.04-5 - - 5-80 80 - U856AE 6. 6.9 0.5 Approx. Shipping Weight (lbs.) 66

4 / 856 Specifications (Metric units) Pipe (in) Orifice (mm) Kv Flow Factor (m/h) At Port At Port General Service - Normally Closed Air - Inert Gas Operating Pressure Differential (bar) Max. AC Max. DC Max. Fluid Light Oil Air - Inert Light Oil Temp. C Wattage Water @ 00 SSU Gas Water @ 00 SSU AC DC Brass Stainless Steel Ref. AC DC /8. 0.05 0.05 5 5 5 5 5 5 8 8 U856A00V U856A0V 6. 6.9 0. /8.6 0.08 0.05 0 0 0 0 0 0 8 8 U856A00V U856A04V 6. 6.9 0. /8.4 0. 0.05 4 4 4 4 4 4 8 8 U856A004V U856A06V 6. 6.9 0. /8.7 0. 0.05.5.5.5.5.5.5 8 8 U856B045V U856B046V 6. 6.9 0.7 NSF 6 and 69 Listed - Normally Closed /8.4 0. 0.0-5 - - 5-8 8 - U856A0E 6. 6.9 0. /4.4 0. 0.0-5 - - 5-8 8 - U856A5E 6. 6.9 0. General Service - Normally Open /8. 0.05 0.05 8.5 8.5 8.5 8.5 8.5 8.5 8 8 U856A005V U856A07V 6. 6.9 0. /8.6 0.08 0.05 8.5 8.5 8.5 8.5 8.5 8.5 8 8 U856A006V U856A08V 6. 6.9 0. /8.4 0. 0.05 8.5 8.5 8.5 6 6 6 8 8 U856A008V U856A00V 6. 6.9 0. /8.7 0.5 0.05 5 5 5 8 8 U856B054V U856B055V 6. 6.9 0.7 NSF 6 and 69 Listed - Normally Open /8.4 0. 0.0-0 - - 6-8 8 - U856A07E 6. 6.9 0. /4.4 0. 0.0-0 - - 6-8 8 - U856A9E 6. 6.9 0. General Service - Universal /8. 0.05 0.05 7 7 7 7 7 7 8 8 U856A009V U856A0V 6. 6.9 0. /8.6 0.08 0.05 4.5 4.5 4.5 4.5 4.5 4.5 8 8 U856A00V U856A0V 6. 6.9 0. /8.4 0. 0.05 8 8 U856A0V U856A04V 6. 6.9 0. /8.7 0. 0.05 8 8 U856B047V U856B048V 6. 6.9 0.7 NSF 6 and 69 Listed - Universal /8.4 0. 0.0 - - - - 8 8 - U856AE 6. 6.9 0. /4.4 0. 0.0 - - - - 8 8 - U856AE 6. 6.9 0. Approx. Shipping Weight (kgs.) -WAY 67

/ 856 4 -WAY Capabilities Chart NEMA Type -9 High Temp. DIN Solenoid Options ➁ Base Catalog Number Resilient Materials Other Standard Rebuild Kit Wiring Box Screw Terminal Multipin DIN Spade Open Frame with Leads Brass Stainless Steel - - - - SC - U856A00V U856A0V E - NV - - - - - - - - - - - SC - U856A00V U856A04V E - NV - - - - - - - - - - - SC - U856A004V U856A06V E - NV - - - - - - - - - - - SC - U856B045V U856B046V E - NV - - - - - - - - - - - SC - - U856A0E - - - - - - - - - - - - - - SC - - U856A5E - - - - - - - - - - - - - - SC - U856A005V U856A07V E - NV - - - - - - - - - - - SC - U856A006V U856A08V E - NV - - - - - - - - - - - SC - U856A008V U856A00V E - NV - - - - - - - - - - - SC - U856B054V U856B055V E - NV - - - - - - - - - - - SC - - U856A07E - - - - - - - - - - - - - - SC - - U856A9E - - - - - - - - - - - - - - SC - U856A009V U856A0V E - NV - - - - - - - - - - - SC - U856A00V U856A0V E - NV - - - - - - - - - - - SC - U856A0V U856A04V E - NV - - - - - - - - - - - SC - U856B047V U856B048V E - NV - - - - - - - - - - - SC - - U856AE - - - - - - - - - - - - - - SC - - U856AE - - - - - - - - - - = Standard. Replace V suffix. ➁ Replace U prefix with SC prefix. FKM EPDM RUBY Oxygen Service PTFE Urethane Vacuum Manual Operator Mounting Bracket Brass AC/DC Stainless AC/DC Dimensions: inches (mm) Ref. A B C D E in.8.08.9 0.59 mm 46 5 5 5 ins.98.5.984 0.59 mm 50 57 5 5 5 in.86.5.7..8 mm 46 57 44 8.47 ().65 (6).4 () M5 Shown with DIN coil without connector.86 () /8 NPT THREADED ADAPTOR PORT (ADD.59 (5) TO HEIGHT DIMENSIONS) KIT # BRASS HV8966600 S. S. HV8966700 (PKG OF 0 PCS) A B E.7 (8) M - THROUGH HOLES C /8 NPT (NSF /8, /4 NPT) D.59 (5) 68

4 Direct Acting Plastic Body Solenoid Valves Plastic Body /4" Compression Connection / 860 Features Available with compression fitting ends for metal or plastic tube to save installation cost Direct acting for reliable performance; resilient seating for tight shutoff Operation similar to 80, but with plastic body Ideal valve for dispensing, damper control, and water applications Mountable in any position % & ) -WAY Construction Valve Parts in Contact with Fluids Body CA Disc NBR Disc-Holder Core Tube CA 05 Stainless Steel NC U Core and Plugnut 40F Stainless Steel NO Springs 0 Stainless Steel and 7-7PH Stainless Steel Shading Coil Copper Electrical Standard Coil and Class of Watt Rating and Power Consumption AC Solenoid Enclosures Spare Coil Part Number General Purpose DC Watts Watts VA Holding VA Inrush AC DC F 0.6 6. 6 0 80 80 F - 9. 5 40 80 - Standard Voltages: 4, 0, 40, 480 volts AC, 60 Hz (or 0, 0 volts AC, 50 Hz). 6,, 4, 0, 40 volts DC. Must be specified when ordering. Other voltages are available when required. Standard: Watertight, Types,,, S, 4, and 4X. Optional: Open Frame Solenoid, Junction Box. See Optional Features Section for descriptions on these and other available options. Nominal Ambient Temp. Ranges AC: F to 5 F (0 C to 5 C) DC: F to 04 F (0 C to 40 C) Refer to Engineering Section for details. Approvals CSA certified. UL recognized components. Meets applicable CE directives. Refer to Engineering Section for details. 860R 69

/ 860 4 -WAY Specifications (English units) Operating Pressure Differential (psi) Max. Watt Rating/ Fluid Class of Coil Orifice Cv Max. AC Max. DC Temp. F Pipe Flow Connections Factor Air-Inert Gas Water Air-Inert Gas Water AC DC Catalog Number Ref. AC DC UNIVERSAL OPERATION (Pressure at any port) /4" O.D. Compression Specifications (Metric units) Watt Rating/ Operating Pressure Differential (bar) Orifice Kv Flow Max. Fluid Class of Coil Pipe Factor Max. AC Max. DC Temp. C Catalog Connections (mm) (m/h) Air-Inert Gas Water Air-Inert Gas Water AC DC Number Ref. AC DC UNIVERSAL OPERATION (Pressure at any port) /4" O.D. Compression.6.06 7 7 4 4 54 49 860G07 9./F 0.6/F.4.09 54 49 860G07 6./F 0.6/F..4 54 49 860G074 9./F 0.6/F NORMALLY CLOSED (Closed when de-energized) /4" O.D. Compression.6.06 9 9 9 9 54 49 860G075 6./F 0.6/F.4.09 7 7 7 7 54 49 860G077 6./F 0.6/F..4 54 49 860G078 6./F 0.6/F NORMALLY OPEN (Open when de-energized) /4" O.D. Compression.6.06 9 9 9 9 54 49 860G067 6./F 0.6/F.4.09 7 7 7 7 54 49 860G069 6./F 0.6/F..4 54 49 860G070 6./F 0.6/F Dimensions: inches (mm) FLOW DIAGRAMS De-Energized Universal /6.07 00 00 65 65 0 0 860G07 9./F 0.6/F /. 50 50 50 50 0 0 860G07 6./F 0.6/F /8.6 0 0 0 0 0 0 860G074 9./F 0.6/F NORMALLY CLOSED (Closed when de-energized) /4" O.D. Compression /6.07 5 5 5 5 0 0 860G075 6./F 0.6/F /. 00 00 00 00 0 0 860G077 6./F 0.6/F /8.6 40 40 40 40 0 0 860G078 6./F 0.6/F NORMALLY OPEN (Open when de-energized) /4" O.D. Compression /6.07 5 5 5 5 0 0 860G067 6./F 0.6/F /. 00 00 00 00 0 0 860G069 6./F 0.6/F /8.6 40 40 40 40 0 0 860G070 6./F 0.6/F Fittings not supplied with valve. To order, refer to List Price Schedule. On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts; the watt rating for the 9./F solenoid is. watts. Energized Ref. Normally Closed De-Energized Energized Press. Exh. Press. Exh. Cyl. Cyl. Normally Open De-Energized Energized Exh. Press. Exh. Press. Cyl. Cyl. 860R 70

4 Direct Acting Dribble Control Solenoid Valves Brass or Stainless Steel Bodies /4" NPT / 80 Features Unique -way design for locking quarter turn actuators in multiple positions for applications which require modulated flow Solenoids can be pulsed independently to bleed air into or out of actuator for fine positioning Direct acting on/off construction NAMUR mount construction reduces complex piping arrangements 0X, 0X4, M5 hardware supplied % ^ ) Construction Valve Parts in Contact with Fluids Body Brass 0 Stainless Steel Seals and Discs NBR Core Tube 05 Stainless Steel Core and Plugnut 40F Stainless Steel Core Springs 0 Stainless Steel Shading Coil Copper Silver Disc-Holder CA Core Guide CA SPRING CAVITY SOL A SOL B VALVE AUTOMATION Electrical Standard Coil and Class of Watt Rating and Power Consumption Spare Coil Part Number AC General Purpose Explosionproof DC Watts Watts VA Holding VA Inrush AC DC AC DC F.6 0. 5 50 860 870 864 874 Standard Voltages: 4, 0, 40, 480 volts AC, (or 00, 00 volts AC, 50 Hz) 6,, 4, 0, 40 volts DC. Must be specified when ordering. Other voltages available when required. Solenoid Enclosures Standard: Watertight, Types,,, S, 4, and 4X. Optional: Explosionproof and Watertight, Types, S, 4, 4X, 6, 6P, 7, and 9. 80DribbleR Options Explosionproof solenoids are available. Prefix EF - Brass Prefix EV - Stainless Steel All other RedHat Solenoid options are available. Optional elastomer contact ASCO. Nominal Ambient Temp. Ranges AC: F to 5 F (0 C to 5 C) DC: F to 04 F (0 C to 40 C) Refer to Engineering Section for details. Approvals UL recognized component. CSA certified. Meets applicable CE directives. Refer to Engineering Section for details. 05

/ 80 4 Specifications (English units) Pipe Orifice Cv Flow Factor Operating Pressure Differential (psi) Max. Fluid Temp. F Watt Rating/ Class of Coil Max. AC Max. DC AC DC Brass Body Stainless Steel Body AC DC /4 /6.09 50 5 40 0 80G706 80G76 0./F.6/F /4 /. 0 00 40 0 80G707 80G77 0./F.6/F /4 /8.5 00 65 40 0 80G708 80G78 0./F.6/F Specifications (Metric units) Pipe Orifice (mm) Kv Flow Factor (m/h) Operating Pressure Differential (bar) Max. Fluid Temp. C Watt Rating/ Class of Coil Max. AC Max. DC AC DC Brass Body Stainless Steel Body AC DC /4.6.07 0 9 60 50 80G706 80G76 0./F.6/F /4.4.0 8 6.9 60 50 80G707 80G77 0./F.6/F /4..6 6.9 4 60 50 80G708 80G78 0./F.6/F Dimensions inches (mm) VALVE AUTOMATION 06 80DribbleR

4 Balanced Poppet Direct Acting Direct Mount High Flow Valves Aluminum or Stainless Steel Bodies /4" NPT / 87 Direct Mount Features NAMUR direct mount construction Balanced Poppet construction provides high flow with low power consumption PTFE rider rings and graphite-filled PTFE seals reduce friction and eliminate sticking for long life No minimum pressure required Tamperproof no-voltage release manual reset provides added safety ) % ^ Construction Valve Parts in Contact with Fluids Body Aluminum 6 Stainless Steel Seals and Discs NBR VMQ FKM Core Tube Stem and Insert 05 Stainless Steel 0 Stainless Steel U 4 Core and Plugnut 40F Stainless Steel Springs 0 Stainless Steel Rider Rings Electrical PTFE VALVE AUTOMATION Standard Coil and Class of Watt Rating and Power Consumption Spare Coil Part Number AC General Purpose Explosionproof DC Watts Watts VA Holding VA Inrush AC DC AC DC F.6 4 4 76000 870 7600 874 Standard Voltages: 4, 0, 40, 480 volts AC, 60 Hz. 6,, 4, 0, 40 volts DC. Must be specified when ordering. Other voltages are available when required. Solenoid Enclosures Standard: Watertight, Types,,, S, 4, and 4X. Optional: Explosionproof and Watertight, Types, S, 4, 4X, 6, 6P, 7, and 9. (To order, add prefix EF or, for Explosionproof Stainless Steel trim and hub on Aluminum-Bodied valves, add EV to catalog number.) See Optional Features Section for other available options. SIL (Safety Integrity Level) Information: PFD (Probability of Falure on Demand) < 4 x 0-7 at a confidence factor of 95%. SFF (Safe Failure Fraction) according to IEC 6508- Table A is 0.99. Only constructions without manual operators apply to the above criteria. 87MoR Nominal Ambient Temp. Ranges 87G0 and 5: -4 F to F (-0 C to 55 C) 87G05 and 55: -40 F to F (-40 C to 55 C) Refer to Engineering Section for details. Approvals General Purpose Solenoid: UL recognized component, CSA certified. Explosionproof Solenoid: (Prefix EF and EV) UL listed solenoid. CSA certified for use in hazardous Locations. Meets applicable CE directives. Refer to Engineering Section for details. 9

/ 87 Direct Mount 4 Specifications (English units) Pipe Orifice Ports - Cv Flow Factor Ports - UNIVERSAL - Low-Temperature Operation /4 /4.5.5 50-40 to 87G05 EV87G055.0/F.6/F UNIVERSAL MANUAL RESET - Tamperproof No-Voltage Release /4 /4.6.4 50-4 to 76 87G0 -.0/F.6/F /4 /4.6.4 50-4 to 48 - EV87G05.0/F.6/F Specifications (Metric units) Pipe Orifice (mm) Kv Flow Factor (m/h) Ports - Ports - UNIVERSAL - Low-Temperature Operation Watt Rating/ Maximum Operating Pressure Diff. (psi) Aluminum Body Stainless Steel Body Class of Coil Air- Inert Gas Fluid Temp. Range F Catalog Number Catalog Number Ref. AC DC Watt Rating/ Maximum Operating Pressure Diff. (bar) Aluminum Body Stainless Steel Body Class of Coil Air- Inert Gas Fluid Temp. Range C Catalog Number Catalog Number Ref. AC DC /4 6.4.45.45 0-40 to 55 87G05 EV87G055.0/F.6/F UNIVERSAL MANUAL RESET - Tamperproof No-Voltage Release /4 6.4.5.7 0-0 to 80 87G0 -.0/F.6/F /4 6.4.5.7 0-0 to 0 - EV87G05.0/F.6/F VALVE AUTOMATION Dimensions inches (mm) Ref. Ref. 9 87MoR

www.eci.co Sede Bogotá D.C, Colombia Transversal 8Bis No 8-4 Calle No 6- Bod. Tel: +57() 755 Fax: +57() 88488 / 885589 ecisales@eci.com.co gerencia@eci.com.co Sede Quito, Ecuador Suiza 6 y República de El Salvador Ed. Euro, Oficina 7B Tel: +59() 600 688 Fax: +59() 567