Tender :CON/EP/Balli/EW & CC Pav./T-I/2016 Corrigendum-I Bill of Quantity Name of Work :- Construction of CC Pavement, Earthwork/formation, Approach Road, Warehouse, Administrative Building, Boundary Wall, Drainage and other allied buildings including internal and external electrification work and Railway track works in connection with Development of Multi Modal Logistics Park(MMLP) at Balli Station near Goa Schedule-F-I (Non Schedule Electrical items) S. Item Description of Item Unit Quantity HIGH MAST 1 NS-1 Supply, installation, testing & Commissioning of heavy duty 30M (Polygonal GI), 3 sections High Mast on existing foundation with lantern carriage suitable for 18 of flood light fittings, gear box, control panel, flexible copper multi core copper cable of 4.0 Sq. mm. size etc. all as per specification including luminaries adjusting arrangement, proper aiming and providing and installing lighting arrestor and 01 double dome aviation obstruction light fittings with LED lamp as required including integral power tool for automatic raising and lowering of lantern carriage. Electrical connections from bottom (control panel) to top shall be made by special trailing cable minimum 02 5 core 4 sq. mm. copper. The system shall have inbuilt facilities for testing the luminaries while in lower position. Set Mast shall be fitted with lighting finial. Erection & commissioning of above equipments will be with the help of modern engineering practice including integral 3 phase/ single phase non - reversible power tool for electrical operation of raising and lowering of lantern carriage with its supporting stand fixing chain and torque limiter etc. including winch gear box for simultaneous and reversible operation of driven winch/integral type arrangement with mast. 2 NS-2 Design casting of open raft type shallow RCC foundation suitable for safe soil bearing capacity of 10 T/ sq.mtr at 2 mtr. Depth, supplying and fixing of foundation bolts manufactured from special steel along with nuts,washer,suitabl size of anchor plates and template etc. as per high mast manufacturer approved drawing. each 3.00 391020.00 1173060.00 3.00 92610.00 277830.00 Signature of Tenderer Page 1 of 5 Signature of Accepting Authority
3 NS-3 Supply, installation, testing & commissioning of flood light similar to cat.no. RVP 301/2x400W(philips)/BGENF 22R Bajaj/Crompton or equlant approved make complete with control gear and SONT/Metal halide lamp etc. including wiring from control gear to lamp with suitable size of PVC insulated cable as required. 4 NS-4 Supply installation testing commissioning of 180 watt LED flood light suitable for 30 meter high mast similar to light cat. LFBXK (crompton)/lfgm-180-c (oreient), XB 01 58 180 watt (goldwin LED) complete with control gear box including wiring from control gear box to lamp with suitable size of Each PVC insulated copper cables/wires as required. 5 NS-5 Supplying installing testing commissioning of control panel housing timer contactor, MCB circuit etc. for 18 luminaries as per specification given below fabricated out of 14 SWG sheet steel out door installation with canopy double door etc. as required. 63 amps TPN MCB as incomer with phase indications 2 nos. 18.00 11319.00 203742.00 18.00 23873.30 429719.40 2 nos. TP 32 amps contactor l&t make, 2 nos. On/off indication circuits, 2 nos. start/ stop button, 2 nos. auto manual selector switch, 2 nos. control MCB, Auxiliary contactor and photo cell 2 nos with time dealy arrangement. set Control for power tools of high mast 25 amps TP MCB 10 KA 25 amps TP contactor L&T make with NO+ 2 NC auxiliary contactor, over load relay with single phase preventer protection, ON/Off indication circuit2no. And 2 nos. forward/reverse switch 1 no. etc. as required. 6 NS-6 Supply, installation, testing & commissioning of Wall / Ceiling mounted flood light luminary with control gear completely wired copper ballast condenser, GES lamp holder suitable for 250 W HPSV lamp including the lamps fixing the luminary in the roof. a) 250W (similar to SNF 114/250 of Philips) 7 NS-7 Supply, installation, testing & commissioning of luminary with anodised aluminium reflector completely wired copper ballast condenser, GES lamp holder suitable for 150W HPSV lamp including the lamps fixing the luminary in the roof with suitable, HPK 225/Son 150 NB (150W of Philips) with glass cover, Bajaj- BJMBIF 150SV 8 NS-8 Supply testing and commissining of one number 11 KV (un earthed ) XLPE aluminium conductor armoured cable conforming to IS 7098 of following size. 3.00 46305.00 138915.00 35.00 1890.00 66150.00 75.00 2362.50 177187.50 Signature of Tenderer Page 2 of 5 Signature of Accepting Authority
a) 3 core 240 sq mm. metre 576.00 1857.21 1069752.96 9 NS-9 Supplying, testing & commissioning for following 1100 Volts grade armoured size of XLPE insulated and PVC sheathered armoured aluminum conductor cable of 1.1 KV grade as required. a 3.5 Core 25 Sq.mm RM 150.00 108.14 16221.00 b 3.5 Core 50 Sq.mm RM 2145.20 207.98 446158.07 c 3.5 Core 120 Sq.mm RM 500.00 444.80 222400.00 d 3.5 Core 185 Sq.mm RM 200.00 642.83 128566.00 e 4 Core 16 Sq.mm PVC Armoured RM 1200.00 129.23 155076.00 10 NS-10 Supply Installation testing & commissioning of galvanised street light poles suitable for mounting 1 no street light fitting, with foundation bolts etc. on existing concrete foundation. The height of octagonal pole shall be 8 meter from ground level with 70 mm top dia, 130 mm base dia and base plate with following bracket (1.5m long). Foundation bolts suitable brackets for fixing luminaries and junction box etc. as per direction of engineer-in-charge. 11 NS- 11 Single Arm Bracket 12 NS-12 Providing suitable concrete foundation for G.I / street light poles as per direction of engineer in charge 13 NS-13 Supplying & fixing RJ-45 modular type Computer sockets outlets alongwith modular plate & modular Hot dip galvanised box in recessed/surface steel conduit etc as required. (For Computer Nodes) 14 NS-14 Supplying, laying, termination, testing & commissioning of Cat - 6 Data cable in existing conduit/ cable trunking complete with termination on both ends with numbering ferrules etc. as required. 15 NS-15 Supply and fixing following pairs tag blocks (crone connector type) duly housed in M.S. enclosure etc. as required. a) 20 Pair b) 40 Pair 20.00 9,088.53 181770.60 20.00 2,053.72 41074.40 30.00 106.49 3194.70 Mtrs. 800.00 23.67 18936.00 2.00 1,355.50 2711.00 1.00 2,259.17 2259.17 Signature of Tenderer Page 3 of 5 Signature of Accepting Authority
16 NS-16 Supplying and drawing following pair, 0.6 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as required. a) 40 Pair 17 NS-17 Supplying, Installation, testing & Commissioning of 240V, 1 phase Ceiling Fans complete with suitable length down rod as required. a) 1200mm sweep 18 NS-18 Supplying of Exhaust fans suitable for 220/240 V, 50 Hz AC of 900 RPM single pahse supply complete with shutter etc as required Mtrs. 50.00 422.26 21113.00 Each 16.00 1,299.30 20788.80 a) 300 mm sweep 19 NS-19 Supply, installation, testing and conmmissioning of Split AC (1.5 Ton) - five star rating Air Conditioner of 1.5 Ton of LG or equivalent make with all necessary acceries for complete installation including VAT & sales Taxincluding copper piping stand for out door units wiring and copper piping drain piping Each from indoor to outdoor up to 12 feet lenght etc. at site. 20 NS-20 Supply, installation, testing and conmmissioning of Extra copper piping and drain piping in case off distance bewtween in-door and outdoor units of AC is more than 12 feet. 21 22 NS-21 Supply of wall mounted 1x14 W mirror light fixtures (Philips Cat. -TWG 204 1X TL5-14W/865) complete as per standard item with copper wiring and GLS/CFL lamps as required as per the standard catalogue item. NS-22 Supply of ceiling mounted 2x11 W light fixtures (Philips Cat. FCS031 2X PL-5/2P11W 240V) complete as per standard item with copper wiring and GLS/CFL lamps as required as per the standard catalogue item. 23 NS-23 Supply of 2X28W Light fitting with ballast and lamp, as per (Philips model No- TMS122 M 2XTL5-28W EBE) or approved Make 24 NS-24 Supply, installation, testing and commissioning of 90 W LED Street Light fitting for poles, type -wipro LR10-911-XXX-57-XX or equivalent approved make 7.00 1346.63 9426.41 Feet Each 10.00 28235.60 282356.00 500.00 178.96 89480.00 18.00 306.15 5510.70 6.00 869.65 5217.90 31.00 931.77 28884.87 20.00 11928.70 238574.00 MISCELANEOUS ITEMS Signature of Tenderer Page 4 of 5 Signature of Accepting Authority
25 NS 25 Supply, installation of 1.1 KV grade ISI marked rubber mats of 1 meter width. RM 4.00 885.92 3543.68 26 NS 26 Supply and installation of the following ISI marked portable fire extinguishers. a 5 Kg dry ABC Fire extinguishers (as per relevent IS specification) 2.00 6,283.53 12567.06 b 5 Kg CO 2 fire extinguishers. (as per relevent IS specification) 27 NS 27 Supply and installation of shock treatment charts as per norms of local supply authority duly framed. 28 NS 28 Supply of standard First Aid Box. (as per relevent standard) 29 NS 29 Fire Stand with stand (set of Two Buckets) 30 NS 30 11KV Tested Shock proof hand gloves 31 NS31 Supply erection testing and commissioning of LT reefer panel cubicle type for out door mounting panel made out of 2mm thick CRCA sheet steel suitable for the use in three phase 440 volts with suitable voltmeter, ammeter, selector switch, phase indicator lamps conssting of follwing mountings, reefer sockets etc. 2.00 6,495.77 12991.54 2.00 625.61 1251.22 5.00 814.93 4074.65 Each 2.00 273.00 546.00 Each 1.00 170.00 170.00 a) 1x300 amps TPN MCCB b) 1x400 amps TPN copper bus bar ; c) 10x63 amps TP MCB D characteristic load contact type. d) 10x63 amps 3 phase 4 pin 440 V with earth pin (CEE 17 type sockets) with rubber boot wall mounting type ( Make Dolphin CEE 17 type plugs or equivalent Haveels, Neptune, Legrand) each 1.00 107798.00 107798.00 Total of Schedule-F-I 5599017.63 All other terms and conditions of the tender document remain unaltered. This Corrigendum will also form of the tender document. All bidders shall sign and upload Corrigendum. Executive Director(Engg.) Signature of Tenderer Page 5 of 5 Signature of Accepting Authority