UDIPCK UDIPCK Industriestraat 2 2751 GT Moerkapelle The Netherlands Tel: +31(0)795931671 Fax: +31(0)795933115 Email: audipack@audipack.com www.audipack.com MKT Series MKT Series-01-2010-02
MKT Series
CHECKLIST 1x Ceiling Finishing Mask Part No. Model 603336 P0992 603709 P1592 600958 P1645 600928 P2806 611821 P3192 621189 P3728-MK2 265 1x OPTIONL 1x 1x 1x or: 1x 39... IR 1x 261119 261134 261135 IR 260195 RF 260196 2x 1.5V RF 1x 260192 MKT Series-02-2008-06
SITUTION PRO D UCT : M OD EL: P0992-P3710 M KT -15 0 ± 300-350 mm P1592-P1788 (open) P1777 (closed) M KT -20 0 ± 350-400 mm P1645-P1788 (open) M KT -25 0 ± 400-450 mm P2806 M KT -15 0WS (Wide Sc reen) ± 300-350 mm P3192 M KT -20 0WS (Wide Sc reen) ± 350-400 mm P3728 M KT -26 5WS (Wide Sc reen) ± 450-500 mm MKT Series-03-2010-02
80mm. 1....mm install level 3x CONCRETE ETON ETON ETON DIN 16168 - M8x... HOUT WOOD OIS HOLZ DIN 571 - M8x... 2.1 POWER LED 1 (20x5mm) 24VDC - max.1.88 mp. MKT Series-04a-2009-12
2.2 External control: control by relay. WRNING: The tension on these wires can be 12-24 VDC and 230 VC! Note: to control the system pulse or constant, and adjust the maximum power, please see 'appendix 260204 MOTOR CRD'. Controlled by computer (for example). External cable control box UP DOWN COMMON UP DOWN k1 k2 k2 k1 K1 K2 -K1 and K2 are relays. -k1 and k2 are relays. 2.3 External control: control by wall switch. External cable control box (not the motor control box!) UP DOWN COMMON Wall switch (with neutral position) (not supplied) M - and are potential free contacts. -: up or down. -: down or up. -M: middle position (!). MKT Series-04b-2008-06
UP COMMON DOWN 3. Note: to control the system pulse or constant, and adjust the maximum power, please see 'appendix 260204 MOTOR ORD'. OPTIONL Safety stop/ emergency switch. Note: lways insert the green connector in the unit, after installation of the product. See page, 2.2: EXTERNL CONTROL. 4. MKT Series-05-2009-12
5. 6.1. M6x20 (4X) / M5x20 (4X) 39... MKT Series-06-2008-06
6.2. M6x20 (4X) / M5x20 (4X) 100mm 39... 7. MX. 130mm Max. 15 kg MX. 500mm MKT Series-07-2010-02
+/- 8. 9. 30-50mm +/- - DJUSTMENT FETURES MKT Series-08-2008-06
9.1. Fine adjustment main mirror in opened position. Detail α 1 2 1. Do not remove the red sealed nut! 2. Raw adjustment of the mirror (α). Release the 2 small srews on the rod-nut and slide it to the correct position when the mirror is in aproximate end position. Fasten the 2 small screws after setting. 9.2. Fine adjustment main mirror in opened position. Detail 1. Release to adjust. Do not remove! 2. Fine adjustment (a α). Release the small philips screw to adjust the limit switch of the main mirror in opened position, by turning the Hexbolt left or right. The end switch will set the right position. When tested and approved, fasten the Philips screw again. 1 2 10 MKT Series-09-2008-06
10.1.Ceiling frame connected to ceiling -10.1.1. -10.1.2. -10.1.3. -10.1.4. -10.1.5. 10.2. Custom finishing -10.2.1. -10.2.2. -10.2.3. -10.2.4. 10.3. Ceiling frame connected to Mirrorkit (Without finishing). -10.3.1. -10.3.2. -10.3.3. -10.3.4. -10.3.5. -10.3.6. -10.3.7. MKT Series-10-2008-06
MX. 15 mm 10.1.1. 10.1.2. MKT Series-11-2010-02
10.1.3. 10.1.4. M4x12 (6X) + MKT Series-12-2010-02
10.1.5. 10.2.1. - 10.2.2. - 10.2.3. MKT Series-13-2008-06
10-15mm 85 15 10.2.2. Max. 2 kg. 10.2.3. 70 5-6mm 5-6mm 5-6mm 5-6mm MKT Series-14-2010-02
10-15 mm 10.2.4. Max. 2 kg. 10.2.5..(1:2.5)! 5-6mm 85 5-6mm.. MKT Series-14a-2010-02
MX. 15 mm 10.3.1. 10.3.2. MKT Series_15a_2010-02
10.3.3. Product Model P0992 MKT-150 420-435 mm 415-430 mm P1592 MKT-200 445-460 mm 455-470 mm P1645 MKT-250 445-460 mm 455-470 mm P2806 MKT-150WS (wide screen) 480-495 mm 445-460 mm P3192 MKT-200WS (wide screen) 515-530 mm 455-470 mm P3728 MKT-265WS (wide screen) 620-635 mm 540-555 mm 10.3.4. M4x12 (2X) + 611329 601754 MKT Series_15b_2010-02
10.3.5. 611330 611328 M4x12 (8X) + 10.3.6 DETIL VIEW 10.3.5 M4x12 (4X) + Handleiding MKT Series_15c_2008-06
10.3.7 11. Remote control - 12. - 13. Handleiding MKT Series_15z_2008-06
12. Remote Control NOTE: When installing the remote PC, be sure that the powersupply is not plugged in. 260192 RF-12 IR-12 -----Yellow -----Red -----lack 868 MHz PROTOCOL RECS 80 13. Remote Control 1 2 3 1-12 CHNNELS 1-12 KNLEN 1-12 CNUX 1-12 KNLEN 0x 1 2 3 4 5 6 7 8 9 =10 =11 C =12 Dx Ex Fx 4-6 7-9 10-12 NR.1 NR.5 NR.12 4-6 + 10-12 + 1 2 3 MKT Series-16-2009-12
C D TECHNICL DT DIMENSIONS 637 POWER LOD LOD P3728 PRIMIR - 100-240 V C, 47~63Hz / SECUNDIR 24 V DC, 1.05 MX. 15 kg MX. 35 kg MKT Series-17-2008-06
TECHNICL DT DIMENSIONS PRODUCT: MODEL: C D P1698 MKT-150T 340 mm 380 mm 353 mm 562 mm P1779 MKT-200T 370 mm 420 mm 503 mm 590 mm D C 602 POWER LOD PRIMIR - 100-240 V C, 47~63Hz / SECUNDIR 24 V DC, 1.05 MX. 15 kg MKT Series-17b-2008-06
udipack's general conditions of sales and delivery apply to all of udipack's deliveries. These conditions can be downloaded from udipack's website, www.audipack.com, or will be sent by post on request. udipack liefert ausschließlich unter die allgemeine Verkauf- und Lieferungsbedingungen von udipack. Diese edingungen sind zum downloaden verfügbar auf die Webseite von udipack, www.audipack.com, oder werden Ihnen auf nfrage per Post gesendet. lle leveringen geschieden uitsluitend volgens de lgemene Verkoop- en Leveringsvoorwaarden van udipack. Een afschrift hiervan kunt u downloaden van de website van udipack, www.audipack.com, of wordt u op aanvraag gestuurd per post. Les conditions de vente et de livraison de udipack s'appliquent à tous les livraisons de udipack. Cettes conditions sont disponible sur le site internet de udipack, www.audipack.com, où seront envoyé par poste sur demande. udipack reserves the right to make changes in specifications and other information contained in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall udipack be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if udipack has been advised of, known, or should have known, the possibility of such damages. UDIPCK UDIPCK Industriestraat 2-4 2751 GT Moerkapelle the Netherlands Tel: +31(0)795931671 Fax: +31(0)795933115 Email: audipack@audipack.com www.audipack.com MKT Series-18-2007-10
Wiring diagram for Mirror-Kit's 261085 13 14 End Switch Mirror Open 261086 21 22 End Switch Mirror Close 260204 260205 24V DC in Up Com Down See MKT manual page 6 (chapter 3) for connection's Power Supply 261119 with Power Cord 261134. Model Motor MKT-150 460011 Mirror motor MKT-150WS 460011 MKT-200 460012 MKT-250 460012 MKT-265 460012 MKT-200WS 460012 MKT-150T 460016 MKT-150WST 460016 MKT-200T 460223 MKT-200WST 460223 MKT-250T 460223 This diagram is suitable for the models: MKT-150/MKT-150-T/MKT-150WS/MKT-150WS-T MKT200/MKT-200-T/MKT-200WS/MKT-200WS-T MKT-250/MKT-250-T MKT-265
udipack www.audipack.com Industriestraat 2-4 2751 GT Moerkapelle The Netherlands audipack@audipack.com Product : Mirror-kit Type : MKT-150, MKT-200, MKT-250, P3192, P1698 D F G E NL S Konformitätserklärung für Maschinen Wir erklären hiermit daß die Produkte konform sind mit den einschlägigen estimmungen der EG-Maschinen richtlinie: Maschinenrichtlinie 89/392/EEG mit 91/368/EEG und 93/44/EEG EMC 89/336/EEG mit EN 55014 und EN 55104 Niederspannung 73/23/EEC mit EN 60335/1 Declaration CE de Conformite pour les machines Nous declare que les produits sont en conformité avec la Directive pour les machines Machine 89/392/EEG with 91/368/EEG and 93/44/EEG EMC 89/336/EEG with EN 55014 and EN 55104 (Low voltage 73/23/EEC with EN 60335/1) EC-declaration of conformity for machines We declare that aforesaid product is constructed in compliance with the following directives with the following directives Machine 89/392/EEG with 91/368/EEG and 93/44/EEG EMC 89/336/EEG with EN 55014 and EN 55104 (Low voltage 73/23/EEC with EN 60335/1) EC-Declaracio'n de la conformidad para las máquinas Declaramos que el producto antedicho está construido en conformidad con los directorios siguientes Machine 89/392/EEG with 91/368/EEG and 93/44/EEG EMC 89/336/EEG with EN 55014 and EN 55104 (Low voltage 73/23/EEC with EN 60335/1) EG-verklaring van overeenstemming voor machines Wij verklaren dat bovengenoemd produkt volgens de onderstaande normen en richtlijnen is geconstrueerd: Machine 89/392/EEG with 91/368/EEG and 93/44/EEG EMC 89/336/EEG with EN 55014 and EN 55104 (Low voltage 73/23/EEC with EN 60335/1) EG-försäkran om överensstämmelse Tillverkare försäkrar härmed att produkt är tillverkade i överensstämmelse med EG's Maskindirektiv: Machine 89/392/EEG with 91/368/EEG and 93/44/EEG EMC 89/336/EEG with EN 55014 and EN 55104 (Low voltage 73/23/EEC with EN 60335/1) Moerkapelle (NL), 24-11-2006 udipack, R&D subject to change without prior notice. Copyright udipack 2005