INDUSTRIAL DIVISION 13131 WEST LITTLE YORK ROAD HOUSTON, TX77041 PHONE: (713) 466-0277 - (800) 231-1412 FACSIMILE: (713) 896-5220 DOCUMENTATION PACKAGE Processed By: Contact Person& Title: Email: Project Management Team Nathan Sebesta, Project Coordinator Nathan.Sebesta@tic.toshiba.com pmteam@tic.toshiba.com Issue Date: September 27, 2013 Toshiba Reference: TIC 668854; P-818062 CLIENT NAME: Zone Distribution a. Contact Person: Cal Lamb b. Email to: cal@zonedistribution.com SUBJECT: Purchase Order No: 1262 DATA PACKAGE REV. LEVEL: REV 00 MANUFACTURING STATUS: Released for Manufacturing Motor Outline, 09.25.13 Rev.0 Nameplate 1500hp, 09.04.13 Rev.0 Space Heater Nameplate, 09.04.13 Rev.0 DIV 2 Nameplate, 08.14.13. Main Terminal Box Outline, 11.12.09 Rev.0 Space Heater Terminal Box Outline, 02.18.09 Rev.1 R.T.D. Terminal Box Outline, 08.02.01 Rev.1 Performance Data 1500hp, 09.04.13 Rev.0 Speed Torque / Current Curve 2300V, 09.04.13 Rev.0 Thermal Damage Curve 2300V, 09.04.13 Rev.0 Speed Torque / Current Curve 4160V, 09.04.13 Rev.0 Thermal Damage Curve 4160V, 09.04.13 Rev.0 Spare Parts List, 09.27.13 Rev.0 Wiring Diagram, 09.27.13 Rev.0 Instruction Manual
TOSHIBA INTERNATIONAL CORPORATION INDEX MPCF-1033 Industrial Division / Houston Motor Plant SHEET NO. 1 of 1 ISSUED 11/29/11 SUPERSEDES 11/08/96 REVISION 2 SQUIRREL CAGE INDUCTION MOTOR WRITTEN BY R. EVANS PERFORMANCE SPECIFICATIONS APPROVED BY CUSTOMER: ZONE DISTRIBUTION TIC 668854 PROJECT 818062 MOTOR NAMEPLATE DATA H.P.: 1500 VOLTS: 2300/4160 3 PH / 60 Hz S. RPM: 3600 FRAME: 5812UZ ENCL: WP-II FLAMPS: 315/175 FLRPM: 3575 FORM: DCNW S.F.: 1.15 NEMA DESIGN: - INSUL CLASS: F TYPE: TIKE AMB.: 40 C CODE: F/G DUTY: CONT MODEL No.: 3UJ M35L177699 kw: - NOM. EFF.: - MIN. EFF.: - P.F.: - AMPERAGE TORQUES **BEARINGS: LOCKED ROTOR: 1948/1177 FULL LOAD (lb-ft.): 2204 DRIVE END: M9-90-INS LOCKED ROTOR (%): 135/145 OPPOSITE DRIVE END: M9-90-INS BREAK DOWN (%): 230/250 EFFICIENCY POWER FACTOR FULL LOAD: 96.1/96.3 FULL LOAD: 92.8/92.0 3/4 LOAD: 95.9/96.0 3/4 LOAD: 91.5/90.1 1/2 LOAD: 95.0/95.0 1/2 LOAD: 87.2/84.5 ALL CHARACTERISTICS ARE AVERAGE EXPECTED VALUES BASED UPON RATED VOLTAGE, FREQUENCY AND SINEWAVE POWER INPUT. * TEMPERATURE RISE WILL BE CONSISTENT WITH INSULATION, AMBIENT AND SERVICE FACTOR AS DEFINED BY NEMA-MG-1, PART12 OR PART 20 ** BEARINGS ARE THE ONLY RECOMMENDED SPARE PART(S). CERTIFIED BY: DATE: JERRY R 03/26/12
TOSHIBA INTERNATIONAL CORPORATION Speed Torque/Current Curve Model #: 3UJ M35L177699 FLAmps: 175 Enclosure: WP-II Voltage: 4160 V Frame: 5812UZ Pole: 2 Frequency: 3 PH / 60 Hz Ins. Class: F HP: 1500 Rotor Inertia: 241.3 lb-ft² Date: 3/26/2012 FLRPM: 3575 Load Inertia: N/A File: H120041 Locked Rotor Amps: 1177 A Load Type: N/A Locked Rotor Torque: 145% Starting at: N/A Breakdown Torque: 250% Accel. Time: N/A Rated Torque: 2204 lb-ft Design Values 300 900 250 750 Percent Full-Load Torque 200 150 100 50 600 450 300 150 Percent Full-Load Current 0 0 0 20 40 60 80 100 Percent Synchronous Speed Torque Current Comments: TIC 668854 D.E.Curve #: H120041 PROJECT 818062 PO 1262 Prepared by: JERRY R Checked by:
TOSHIBA INTERNATIONAL CORPORATION Thermal Limit Curve Design Values (For Reference Only) Model #: 3UJ M35L177699 FLAmps: 175 Enclosure: WP-II Voltage: 4160 V Frame: 5812UZ Pole: 2 Frequency: 3 PH / 60 Hz Ins. Class: F HP: 1500 Rotor Inertia: 241.3 lb-ft² Date: 3/26/2012 FLRPM: 3575 Load Inertia: N/A File: H120041 10000 1000 Time in Seconds 100 RUNNING CONDITION COLD (AMBIENT) STALL 10 HOT STALL 1 0 100 200 300 400 500 600 700 800 900 1000 Percent of Full Load Current Comments: TIC 668854 D.E.Curve #: H120041 PROJECT 818062 PO 1262 Prepared by: JERRY R Checked by:
TOSHIBA INTERNATIONAL CORPORATION Speed Torque/Current Curve Model #: 3UJ M35L177699 FLAmps: 315 Enclosure: WP-II Voltage: 2300 V Frame: 5812UZ Pole: 2 Frequency: 3 PH / 60 Hz Ins. Class: F HP: 1500 Rotor Inertia: 241.3 lb-ft² Date: 3/26/2012 FLRPM: 3575 Load Inertia: N/A File: H120041 Locked Rotor Amps: 1948 A Load Type: N/A Locked Rotor Torque: 135% Starting at: N/A Breakdown Torque: 230% Accel. Time: N/A Rated Torque: 2204 lb-ft Design Values 250 750 200 600 Percent Full-Load Torque 150 100 450 300 Percent Full-Load Current 50 150 0 0 0 20 40 60 80 100 Percent Synchronous Speed Torque Current Comments: TIC 668854 D.E.Curve #: H120041 PROJECT 818062 PO 1262 Prepared by: JERRY R Checked by:
TOSHIBA INTERNATIONAL CORPORATION Thermal Limit Curve Design Values (For Reference Only) Model #: 3UJ M35L177699 FLAmps: 315 Enclosure: WP-II Voltage: 2300 V Frame: 5812UZ Pole: 2 Frequency: 3 PH / 60 Hz Ins. Class: F HP: 1500 Rotor Inertia: 241.3 lb-ft² Date: 3/26/2012 FLRPM: 3575 Load Inertia: N/A File: H120041 10000 1000 Time in Seconds 100 RUNNING CONDITION COLD (AMBIENT) STALL 10 HOT STALL 1 0 100 200 300 400 500 600 700 800 900 1000 Percent of Full Load Current Comments: TIC 668854 D.E.Curve #: H120041 PROJECT 818062 PO 1262 Prepared by: JERRY R Checked by:
INDUSTRIAL DIVISION 13131 WEST LITTLE YORK ROAD HOUSTON, TX 77041 PHONE: (713) 466-0277 (800) 231-1412 FACSIMILE: (713) 466-8773 SPARE PARTS (RECOMMENDED) OTHER THAN THE OIL USED FOR RE-LUBING BEARINGS, TOSHIBA SUGGESTS FOR THESE SQUIRREL CAGE INDUCTION MOTORS, ARE INDUSTRY STANDARD, AND COMMERCIALLY AVAILABLE BEARINGS, AS NOTED BELOW. MOTOR COMPONENTS (SUCH AS TERMINAL BOXES, FAN COVERS, MACHINED PARTS) ARE AVAILABLE UPON SPECIAL REQUEST. IN THIS CASE, PLEASE ADVISE OUR ORDER ENTRY DEPARTMENT THE MODEL AND SERIAL NUMBERS (FOUND ON THE MOTOR NAMEPLATE), AND A DESCRIPTION OF THE COMPONENT REQUIRED. THEY WILL THEN FURNISH THE CURRENT PART NUMBER, PRICE AND AVAILABILITY. (NOTE: OUR INTERNAL PART NUMBERS ARE SUBJECT TO CHANGE WITHOUT NOTICE, AND ARE NOT PUBLISHED. PLEASE ADVISE IF YOU HAVE ANY QUESTIONS. CUSTOMER: ZONE DISTRIBUTION PURCHASE ORDER # 1262 TOSHIBA FILE # 668854 MODEL # 3UJM35L177699 HP / RPM / ENCL / FRAME: 1750-1500 / 3600 / WP-II / 5812UZ DRIVE END BEARING: M9-90-INS OPPOSITE DRIVE END BEARING: M9-90-INS Prepared By: N.SEBESTA Date: 09.27.13