MAINTENANCE PRODUCTS. CNH-1015_MaintProducts_Case_r16.indd 1

MAINTENANCE PRODUCTS CNH-1015_MaintProducts_Case_r16.indd 1 11/12/10 3:08 PM

INDEX LUBRICANT PRODUCTS Hydraulic/Transmission Fluid p. 4-7 Engine Oil p. 8-11 Gear & Transmission Oil p. 12-15 Grease p. 16 Cotton Picker Products p. 17 FILTRATION PRODUCTS Lube Filtration p. 18-19 Fuel Filtration p. 20 Hydraulic Filtration p. 21 Air Filtration p. 22 All-Makes Filters p. 23 COOLANT / ANTIFREEze XHD p. 24-25 fluid ANALYSIS Systemgard Fluid Analysis p. 26-27 YOUR EQUIPMENT S LIFEBLOOD Represented throughout these pages are the industry s finest equipment maintenance products. Together, they offer the ultimate in protection for your equipment investment, along with the assurance that your work will be completed on time, at the lowest operating cost, with no downtime. Off-road equipment needs off-road products Did you know that off-road equipment uses 90 % of its horsepower capacity? Trucks, by contrast, use 60% and cars use just 30% of their available horsepower. That is why our products are specifically designed for heavy-duty off-road use. You depend on Case and Case IH quality for your equipment needs. To properly maintain the health of your machinery, you can also count on Case and Case IH quality for your equipment maintenance needs. It costs you very little more to use the best; it could cost you greatly not to In terms of quality, our equipment maintenance products are second to none in the industry. Take oil for example. It costs just a few bucks to protect an equipment investment of $50,000 to $100,000 or more. So it makes good sense to use only the highest quality oil. Building on our ongoing partnership with Viscosity Oil, the latest Akcela and Tutela lubricants outperform most competitive brands and excel at protecting your off-road equipment. So don t settle for lubricants that are anything less than the best. Those who do risk downtime and expensive repairs. 2 3 CNH-1015_MaintProducts_Case_r16.indd 2-3 11/12/10 3:09 PM

Hydraulic/TRANSMISSION FLUID NEXPLORE FLUID (MAT-3525) NEXPLORE is a single fluid for hydraulic systems, transmissions, differentials, wet brakes and PTO clutches. It is a high-quality, all-purpose hydraulic oil that is designed for use in an ambient temperature range of -5 F (-20 C) to 120 F (50 C). 87299944 nexplore 1 GAL./3.79 L. 440787A1 nexplore 5 gal./18.93 l. 440789A1 nexplore 55 gal./208.19 L.» Friction modifiers and anti-wear additives provide protection from abrasion and scoring to crucial components» Superior wear protection for hydraulic components, drive train gears and other transmission parts» Suppresses wet brake chatter and enhances brake stopping capacity, including PTO brakes B17805 F200A MULTI-SEASON 5 GAL./18.93 L. B17806 F200A MULTI-SEASON 55 GAL./208.19 L.» Provides good filterability for optimum hydraulic system performance» Controlled frictional characteristics provide smooth operation of wet brakes and clutches» Thoroughly tested and approved by CNH Engineering F200A hydraulic/transmission FLUID (Mat-3526) F200A is a multipurpose, cold-weather hydraulic/transmission fluid that can be used when your operator manual recommends NEXPLORE, but improved low-temperature capabilities are needed (below 10 F/-12 C). In addition to improved low-temperature capabilities, F200A Multi-Season Hydraulic Oil provides the reliability of NEXPLORE at high temperatures, so there s no need to remove this fluid during the summer months. MULTI BIO BIODEgRADABLE hydraulic/transmission FLUID MULTI BIO is a biodegradable hydraulic/transmission fluid that can be used when recommended by your operator manual or service bulletin. Currently approved for Case skid steers and Case IH JX, JXU, Puma and MXM tractors, this biosynthetic-based 10W-30 fluid exceeds several governmental biodegradability and ecocompatibility requirements, with biodegradability exceeding 90%, including OECD 201/202/203/301B, VAMIL(NL), WGK 0, CEC L33A-93 and D5864-96. It s a multifunctional oil for transmission, wet brakes and hydraulic systems. hydrosystem AW HYDRAULIC FLUID (Mat-3508) For separate-sump hydraulic systems HYDROSYSTEM is a high-performance, anti-wear oil approved for use in Case 9000 and CX Series excavators. It s designed for use in applications where an anti-wear hydraulic oil is required. Our hydraulic fluid:» Meets or exceeds specs for Case MS 1216, DIN51524-Part2, Dennison HF-O and Cincinnati Milacron P-70» Resists viscosity and thermal breakdown» Provides ultra-pure filtration» Available in ISO VG 46, 68 and 100 Product AMBieNT TEMPerature RANGe FAHreNHEIT celsius HYDROSYSTEM AW 46 +5 TO +95 F -15 TO +35 C HYDROSYSTEM AW 68 +23 TO +122 F -5 TO +50 C HYDROSYSTEM AW 100 +41 TO +122 F +5 TO +50 C HYDRAULIC EXCAVATOR FLUID (Mat-3509) For high-pressure hydraulic systems This high-pressure fluid provides the viscosity stability that s essential to optimum machine performance and long life, and it protects year-round with no seasonal changes. It s approved for use in Case, Drott and Poclain high-pressure hydraulic systems. Special additives protect hydraulic system components against wear, corrosion and loss of efficiency. It minimizes aeration, cavitation, foaming and deposits. Note: HYDRAULIC EXCAVATOR FLUID (MS1230) is mandatory in Poclain excavators. In all other Case excavators, HYDROSYSTEM AW Hydraulic Fluid or HY-TRAN ULTRA can be used depending on ambient temperature range. TCH HYDRAULIC FLUID (Mat-3506) A unique, all-weather hydraulic fluid for Case crawlers TCH is a unique, all-weather transmission/converter/hydraulic fluid with controlled frictional characteristics to ensure smooth operation of wet clutches and minimize clutch slippage. 116799A2 HYDROSYSTEM AW 46 5 GAL./18.93 L. 87299123 HYDROSYSTEM AW 46 55 GAL./208.19 L. 87299897 HYDROSYSTEM AW 68 5 GAL./18.93 L. 87299774 HYDROSYSTEM AW 100 5 GAL./18.93 L. B67301 HYDR. EXC. FLUID 5 GAL. /18.93 L. B67302 HYDR. EXC. FLUID 30 GAL./113.6 L.» Shear stable viscosity provides consistent year-round performance that eliminates the need for switching fluids in low temperatures» Minimizes wear of hydraulic components, converters, drive train gears and other transmission parts 139030A1 TCH FLUID 1 GAL./3.79 L. 73340127 MULTI bio 5 gal./18.93 l.» Contains special additives to protect against foaming, deposit formation B53977 TCH FLUID 5 GAL./18.93 L. 73340151 MULTI bio 30 gal./113.6 l. and moisture that can cause corrosion and damage your equipment B53979 TCH FLUID 55 GAL./208.19 L. 6 7 CNH-1015_MaintProducts_Case_r16.indd 6-7 11/12/10 3:09 PM

HYDRAULIC/TRANSMISSION FLUID HY-TRAN ULTRA (Mat-3505) A unique, all-weather hydraulic/transmission fluid HY-TRAN ULTRA is, quite simply, the finest hydraulic/transmission fluid we make. It will enhance your brake and clutch capabilities while helping to reduce brake chatter, clutch slippage and wear, and final drive wear. HY-TRAN ULTRA fluid is designed for use in an ambient temperature range of -20 to +120 F (-30 to +50 C). Additive/ Water Fallout hy-tran The difference is easy to see. HY-TRAN has the unique ability to hold up to 1% of its volume in water and not experience any harmful effects, like additive fallout, whereas typical tractor fluids experience problems at 0.5% or less. HY-TRAN ULTRA:» Provides better water tolerance and filtration efficiency than typical tractor fluids, which is critical for preventing additive fallout, filter plugging and sluggish performance» Provides stable viscosity, which is essential to maintaining optimum machine performance and long life» Provides superior wear protection for hydraulic components, drive train gears and other transmission parts» Provides controlled frictional characteristics to provide smooth operation of wet brakes and clutches» Special non-zinc additives ensure a thermally and hydrolytically stable product, keeping the system free of deposits and helping prevent corrosive by-products» Meets the frictional requirements of Caterpillar TO-2, as well as all performance requirements of the former Case MS 1206, MS 1207 and International Harvester B-6 specifications (may be used in all applications where Case PTF and HY-TRAN or low temperature HY-TRAN PLUS fluids were formerly recommended)» Is thoroughly tested by Case Engineering and approved for Case, Case IH and International Harvester equipment Learn more about HY-TRAN ULTRA and how to become a HY-TRAN man at www.hytranman.com 139029A2 HY-TRAN ULTRA 1 GAL./3.79 L. 143945A2 HY-TRAN ULTRA 10 QTS./9.46 L. 372705R7 HY-TRAN ULTRA 5 GAL./18.93 L. 999597R7 HY-TRAN ULTRA 30 GAL./113.6 L. 999655R7 HY-TRAN ULTRA 55 GAL./208.19 L. 298050A2 HY-TRAN ULTRA 330 GAL./1249.2 L. Milligrams 90 80 70 60 50 40 30 20 10 0 Copper Weight Loss OXIDATION-CORROSION TEST Copper Deposit Brass Weight Loss Brass Deposit Typical Tractor Fluid A Typical Tractor Fluid B HY-TRAN Premium Tractor Fluid HY-TRAN ULTRA SSL TRANSMISSION OIL (Mat-3504) All-season synthetic blend HY-TRAN ULTRA SSL fluid is designed to work optimally all the way down to -40 F (-40 C), yet it does not need to be drained in the summer, because it s a synthetic blend. 236610A2 HY-TRAN ULTRA ssl 5 gal./18.93 l. B505698 HY-TRAN ULTRA ssl 30 gal./113.6 l. Volume Passed, mls 700 600 500 400 300 200 100 0 WET/AGED FILTERABILITY TEST, 5 MICRON Typical Tractor Fluid A Typical Tractor Fluid B HY-TRAN Premium Tractor Fluid Lab tests confirm what field tests have proven: The ability of HY-TRAN to protect and perform when exposed to moisture is unmatched. 4 5 CNH-1015_MaintProducts_Case_r16.indd 4-5 11/12/10 3:09 PM

ENGINE OIL NO. 1 ENGINE OIL (MAT-3507) Heavy-duty engine oil for diesel engines NO. 1 is a premium, high-performance engine oil specifically designed and tested to provide maximum protection, performance and long life in heavy-duty, high-temperature operation. It s designed for Case construction, agricultural and other off-highway dieselpowered equipment.» Provides superior protection against wear and corrosion» Helps keep engines exceptionally clean, minimizing deposits and maintaining excellent soot control» Allows excellent cold-weather starting and operating performance» Meets performance requirements of API Service Classification CI-4, CH-4, CG-4, CF-4, CF, CE, CD II, CD or CC; Mack EO/K-2; Mack EO-M Plus; Cummins 20076, 20077, 20078; ACEAE5; JASO CD; MAN 270 and 271; Caterpillar Series 3 and Caterpillar TO-2, as well as Allison C-3 and C-4 performance requirements NO. 1 SSL ENGINE OIL (MAT-3507) All-season, extreme-temperature engine oil» A full synthetic engine oil that provides superior performance in severe service applications over a broad ambient temperature range of -40 to +104 F (-40 to +40 C)» Provides faster engine starts and more immediate engine lubrication» SAE 0W-40 SAE PART NO. PRODUCT CONTAINER SIZE 0W-40 B505692 NO. 1 1 QT./.95 L. 0W-40 B505693 NO. 1 10 QTS./9.46 L. 0W-40 B505694 NO. 1 30 GAL./113.56 L. 10W 407352R5 NO. 1 5 GAL./18.93 L. 10W B505695 NO. 1 55 GAL./208.19 L. 30 407352R5 NO. 1 1 QT./.95 L. 30 139032A2 NO. 1 1 GAL./3.79 L. 30 143947A1 NO. 1 10 QTS./9.46 L. 30 407356R5 NO. 1 5 GAL./18.93 L. 30 407360R5 NO. 1 30 GAL./113.56 L. 30 407362R5 NO. 1 55 GAL./208.19 L. 10W-30 104104A1 NO. 1 1 QT./.95 L. 10W-30 139033A1 NO. 1 1 GAL./3.79 L. 10W-30 372253A1 NO. 1 10 QTS./9.46 L. 10W-30 104106A1 NO. 1 5 GAL./18.93 L. 10W-30 372254A1 NO. 1 30 GAL./113.56 L. Simple math: Less oil consumption = Less expense NO. 1 is formulated to keep your engine cleaner throughout its life. Over time, that means lower oil consumption and less oil expense. In fact, if you choose NOT to use NO. 1, you might need to change your oil as much as 50% more often. 14 12 10 8 6 4 2 0 Total Base Number 8.0 Competitive Brand CH-4 10.3 Competitive Brand CI-4 12.0 NO. 1 Engine Oil Total Base Number (TBN) is an indication of the detergent and dispersant additive levels in an oil. These additives neutralize acids, and fight soot buildup and filter plugging. Relative Engine Wear 5 4 3 2 1 0 Piston Deposits * * After 250-hour test Competitive Brand Oil NO. 1 Engine Oil NO. 1 engine oil s unique formula keeps piston deposits down so your engine runs cleaner. Oil Consumption Oil Consumption Time Competitive Brand Oil NO. 1 Engine Oil Cleaner-running engines use less oil over time. That can really add up to cost savings. 10W-30 104108A1 NO. 1 55 GAL./208.19 L. 10W-30 323443A1 NO. 1 330 GAL./1249.2 L. 15W-40 407410R2 NO. 1 1 QT./.95 L. 15W-40 139034A1 NO. 1 1 GAL./3.79 L. 15W-40 143949A1 NO. 1 10 QTS./9.46 L. 15W-40 407414R2 NO. 1 5 GAL./18.93 L. 15W-40 253782A1 NO. 1 30 GAL./113.56 L. 15W-40 407420R2 NO. 1 55 GAL./208.19 L. 15W-40 298052A1 NO. 1 330 GAL./1249.2 L. 20W-50 332390A2 NO. 1 5 GAL./18.93 L. 8 9 CNH-1015_MaintProducts_Case_r16.indd 8-9 11/23/10 1:14 PM

ENGINE OIL low ASh ENGINE OIL (Ms1122) For LPG, natural gas and similar engines LOW ASH engine oil is a superior-quality product blended for optimum performance and service life. It s specifically designed for heavy-duty service in gasoline, LPG, natural gas and 2-stroke cycle diesel engines in agricultural, industrial, truck, passenger car and construction equipment. sae 30 407340R3 LOW ASH 1 QT./.95 L. 30 139037A1 LOW ASH 1 GAL./3.79 L. 30 407344R3 LOW ASH 5 GAL./18.93 L. 30 407350R3 LOW ASH 55 GAL./208.91 L. AUTO SUPREME MOTOR OIL For automotive gasoline engines AUTO SUPREME motor oil provides protection and performance for all seasons, eliminating the need for seasonal oil grade changes. It s formulated with base oils and additives that provide superior performance and protection for light application engines.» Provides fast warm-up» Improves fuel efficiency» Reduces friction for quick, easy starting with instant lubrication sae 5W-30 372255A2 AUTO SUPREME 1 QT./.95 L. 5W-30 B505696 AUTO SUPREME 55 GAL./208.19 L. 10W-30 B600401 AUTO SUPREME 1 QT./.95 L. 10W-30 B505710 AUTO SUPREME 55 GAL./208.19 L. LOW ASH Engine Oil provides high levels of dispersants (detergents) formulated to minimize metallic-ash deposit and lengthen valve and spark plug life. Put Case Quality In Your Truck Or Car Too! 10 11 CNH-1015_MaintProducts_Case_r16.indd 10-11 11/12/10 3:09 PM

Gear & TRANSMISSION OIL HYPOIDE EP GEAR LUBE (Mat-3511) For high-speed/low-torque and low-speed /high-torque applications This premium, extreme-pressure gear lubricant provides superior foam and oxidation stability, and it reduces the risk of corrosion and deposits that can cause costly damage to your equipment. It s formulated to stand up to high-temperature conditions.» Prevents objectionable deposits and corrosion in gear cases, bearing rollers, races and thrust washers» Exceeds API GL-5 and MIL-L-2105D requirements, and meets MIL-PRF2105E and ZFTE-ML05A HYDRODEX 3 AUTOMATIC TRANSMISSION FLUID (ATF) HYDRODEX 3 is an automatic transmission fluid designed for use in certain powershift transmissions, power steering systems and other hydraulic systems in off-highway equipment, including the optional powershift transmission in the L-Series and M-Series Loader Backhoes. 87299133 HYDRODex 3 1 QT./.95 L. 87299134 HYDRODex 3 2.5 GAL./9.46 L. 87299135 HYDRODex 3 30 GAL./113.56 L. SAE Part No. Product Container size 80W-90 B80901 HYpoIDE EP 1 QT./.95 L. 80W-90 B80902 HYpoIDE EP 1 GAL./3.79 L. 80W-90 B80903 HYpoIDE EP 2.5 GAL./9.46 L. 80W-90 B80904 HYpoIDE EP 5 GAL./18.93 L. 80W-90 B80905 HYpoIDE EP 16 GAL./60.64 L. 80W-90 B80906 HYpoIDE EP 30 GAL./113.56 L. 80W-90 B80907 HYpoIDE EP 55 GAL./208.19 L. 85W-140 B85141 HYpoIDE EP 1 QT./.95 L. 85W-140 B85142 HYpoIDE EP 1 GAL./3.79 L. 85W-140 B85143 HYpoIDE EP 2.5 GAL./9.46 L. 85W-140 B85144 HYpoIDE EP 5 GAL./18.93 L. 85W-140 87299117 HypoIDe ep 16 gal./60.64 L. 85W-140 B85146 HYpoIDE EP 55 GAL./208.19 L. HYPOIDE SSL SYNTHETIC GEAR LUBE (Mat-3511) All-season, extreme-temperature gear lubricant HYPOIDE SSL Gear Lube is a synthetic-based, extremepressure transmission and gear oil for severe service in agricultural and construction equipment.» Highly resistant to thermal breakdown» Provides enhanced performance features over a wider temperature range» Recommended for use in cutter bar assemblies TRANSAXLE FLUID (Mat-3510) A unique drive train lubricant TRANSAXLE FLUID provides smooth, quiet operation in certain components of Case wheel loaders (where recommended by operator manual). Its excellent low-temperature characteristics are superior to standard products. Transaxle Fluid:» Minimizes deposits and corrosion of gear case and components» Extends brake and gear life SAE Part No. Product Container size 75W-90 87299775 HYpoIDE SSL 1 QT./.95 L. 75W-90 87299136 HYpoIDE SSL 5 GAL./18.93 L. 80W-140 87299904 HYpoIDE SSL 1 QT./.95 L. SAE Part No. Product Container size 20W-40 87667672 TRANSAXLE FLUID 5 GAL. /18.93 L. 80W-140 B17777 TRANSAXLE FLUID 2.5 GAL./9.46 L. 80W-140 B17778 TRANSAXLE FLUID 5 GAL. /18.93 L. 80W-140 87299943 HYpoIDE SSL 5 GAL./18.93 L. 80W-140 B17779 TRANSAXLE FLUID 55 GAL./208.19 L. 12 13 CNH-1015_MaintProducts_Case_r16.indd 12-13 11/12/10 3:09 PM

Gear & TRANSMISSION OIL DRIVETRAIN FLUID Engineered for Case IH Quadtrac Idlers This high-performance SAE50 transmission and drivetrain lubricant is engineered to meet the severe conditions found in Quadtrac idlers. It s designed to withstand the extreme demands from high temperatures and high loads while delivering outstanding antiwear protection for greater productivity from reduced downtime. Features and benefits:» Superior oxidation stability and low-temp fluidity with endurance to withstand high heat and severe operating conditions» Excellent antifoaming properties provide additional anti-wear properties and reduced fluid loss» Compatible with new and traditional seal and clutch materials» Meets or exceeds all requirements for Caterpillar TO-4 MC50WHD QUAD TRAC IDLER FLUID 1 GAL./3.79 L. HTO ADDITIVE HTO is designed to provide additional antiwear, oxidation and corrosion-inhibiting properties. It extends component life in Case skid steer hydrostatic transmissions for Case Uni-Loader models 1818, 1825, 1835, 1835B, 1835C, 1838, 1840, 1845C, 40XT, 60XT, LIMITED SLIP ADDITIVE For high-speed/low-torque and low-speed/high-torque applications This additive is specially formulated to help reduce clutch plate friction. It s designed for driving axles equipped with limited slip differentials where recommended by operator manual. Limited Slip Additive:» Reduces clutch plate friction and eliminates clutch chatter» Facilitates application and release of clutch plates 87299132 LTD SLIP ADDITIVE 1 PT./.47 L. AXLE OIL ADDITIVE Developed for use with HY-TRAN ULTRA, this axle oil additive is designed to enhance HY-TRAN ULTRA s thermal characteristics in severetemperature applications, and to help reduce brake and clutch noise in Case IH 5100, 5200, 7100, 7200, 8900, MXC, MX Maxxum, MX Magnum agricultural tractors, Case IH 2100 and 2300 combines, Case L and M Series loader backhoe rear axles, K-Series loader backhoe transaxles (after PIN JJG020000) and G-Series forklift nonsteer drive axles. Add 1 pint of additive to each 7.5 gallons of HY-TRAN ULTRA. This concentration can be doubled in specific severe situations to 1 pint in 3.75 gallons, but it must never exceed this level of concentration. Caution: This oil additive is NOT recommended for use in fluids other than HY-TRAN ULTRA, such as HY-TRAN, HY-TRAN PLUS or TCH. 70XT, 75XT and 85XT. 402982A2 AXLE OIL ADDITIVE 1 PT./.47 L. B17508 HTO ADDITIVE 1 QT./.95 L. HTO PREMIX HTO PREMIX is a special blend of 10W-30 NO. 1 engine oil premixed with HTO anti-wear additive for service fill in hydrostatic transmissions in Case Uni-Loader models 1818, 1825, 1835, 1835B, 1835C, 1838, 1840, 1845C, 40XT, 60XT, 70XT, 75XT and 85XT. Addition of HTO Additive is not required when premix is used. 298053A1 HTO PREMIX 1 GAL./3.785 L. 14 15 CNH-1015_MaintProducts_Case_r16.indd 14-15 11/12/10 3:10 PM

GREASE COTTON PICKER PRODUCTS MULTI-PURPOSE GREASE 251H EP (Mat-3550) 251H EP is an NLGI No. 2, lithium-soap, extreme-pressure grease for wheel bearings, universal joints, spline shafts, water pump bearings, chassis and general lubrication. PREMIUM GREASE EP-2 (Mat-3550) EP-2 is a multipurpose NLGI 2, GC-LB high-temperature lithiumcomplex, extreme-pressure grease for use in agricultural, construction, automotive and industrial equipment. It s designed for use in conventional and disc brake wheel bearings, universal joints, spline shafts, water pumps and general chassis lubrication. SYNTHETIC GREASE GR-1000 SSL (Mat-3550) GR-1000 SSL is a synthetic-based, NLGI 2, GC-LB, extreme-pressure grease for use in agricultural, construction, automotive and industrial equipment. It s designed for use in conventional and disc brake wheel bearings, universal joints, spline shafts, water pumps and general chassis lubrication. It provides excellent low- and high-temperature performance. MOLY GREASE GR-75 (Mat-3550) GR-75MD is a specially formulated, lithium-soap, extreme-pressure grease containing molybdenum disulfide. It s designed for heavy-duty use in construction, industrial and agricultural equipment. It provides protection from extreme loads, shock loading or slow speed conditions. EP-0 GREASE (Mat-3550) EP-0 is an extra-soft NLGI 0 lithium-soap, extreme-pressure grease recommended for use in conditioner-roll chaincase gearboxes of 3300, 8300 and SC400, Mower Conditioners; 3200 Disc Mowers; 525 Auger Headers; and 8800 Draper Headers. 132096A1 GREASE 251H EP TUBE 87298944 GREASE 251H EP 35 LBS./15.9 L. 87298945 GREASE 251H EP 120 LBS./54.5 L. B505708 PREMIUM GREASE TUBE 87299163 SYNTHETIC GREASE TUBE 73340211 MOLY GREASE TUBE 87298946 MOLY GREASE 35 LBS./15.9 L. 87298947 MOLY GREASE 120 LBS./54.5 L. B505226 EP-0 GREASE 3.35 OZ. CASE IH COTTON PICKER BAR LUBE (Mat-3550) Premium protection This premium, soft, channel-resistant grease is designed for all applications, including high-load cotton picker spindle assemblies. It provides superior wear protection and oxidation stability. Case IH Bar Lube:» Will not corrode bronze bushings» Contains additives that inhibit rust, corrosion and oxidation to protect these critical, high-value components during off-season storage, as well as during daily operation DURAFIT COTTON PICKER SPINDLE GREASE Standard protection This soft, channel-resistant grease lubricates and penetrates in low-temperature/high-speed or normal-temperature/low-load applications. It provides adequate lubrication for day-to-day operation of cotton picker spindle assemblies. For optimum protection, and especially for idle storage periods, Case IH COTTON PICKER BAR LUBE is recommended. HI-SPEED SPINDLE CLEANER Heavy-duty spindle detergent This is the best protection possible for picker bar components and cotton picker pressurized moisteners. It s specially developed for use in Case IH cotton pickers. Hi-Speed Spindle Cleaner:» Reduces stain and wrapping» Moistens and cleans cotton picker spindles» Cleans dirt and plant sap from spindles 407515R1 COTTON PICKER BAR LUBE 35 LBS./15.9 L. 407516R1 COTTON PICKER BAR LUBE 120 LBS./54.5 L. 407517R1 COTTON PICKER BAR LUBE 400 LBS./182 L. B500418 SPINDLE GREASE 35 LBS./15.9 L. B500419 SPINDLE GREASE 120 LBS./54.5 L. B500420 SPINDLE GREASE 400 LBS./182 L. 87297404 SPINDLE grease 2000 lbs./909.1 L. B91241V SPINDLE CLEANER 5 GAL./18.93 L. B91337V SPINDLE CLEANER 55 GAL./208.19 L. 16 17 CNH-1015_MaintProducts_Case_r16.indd 16-17 11/12/10 3:10 PM

FILTRATION PRODUCTS LUBE FILTRATION To meet the performance demands of today s tough off-road environments, your equipment is generating more usable horsepower than ever before. Tighter tolerances, higher temperatures and severe duty cycles are driving the requirement for highquality filtration and increased durability without sacrificing filter life. Today s low-emission engine designs make engine filtration extremely critical, especially particles in the 5- to 10- micron range, which are most damaging to modern engines. While the costs for repairing equipment breakdowns are normally high, they are often miniscule compared to those associated with delayed harvests or missed project completion deadlines. Don t jeopardize productivity by using will-fit filtration. CNH Original Parts lube filters are designed specifically for your equipment. They re guaranteed to ensure peak performance while providing maximum protection for your investment. ULTRA FILTERS WITH MICROLOC MEDIA Our ULTRA filters with MICROLOC media represent the next generation of filtration, designed specifically to deliver optimum efficiency without loss of filter life. Extensive laboratory research and thousands of hours of field tests have been dedicated to developing MICROLOC media. The individual components of ULTRA filters have been designed for high performance and durability through countless severe duty cycles. These efforts have resulted in a premium filtration product line that provides an outstanding competitive difference and superior system protection designed specifically for your Case equipment. Optimized filtration performance in capacity (life), efficiency (cleanliness) and restriction to flow For dirt, dust and debris, this is the end of the line. 1 Superior Media Our filters are designed to trap more of the small contaminants that are most damaging to diesel engines. The media is uniformly resin-impregnated and heat-cured to provide efficient filtration, while resisting the effects of moisture. The media used in many of our newer filters combine microglass and cellulose fibers for doubled efficiency over standard filters. 2 Stacked Disc This custom-designed filtration media is 70% more efficient than cellulose or paper media in filtering the 5- to 15-micron size contaminants. 3 hot Melt Our filters use hot melt a high-quality adhesive to uniformly bond the filter element to the end caps. Plastisol adhesive keeps the filter media from bunching and rupturing. 4 Rubber Seals Many filter manufacturers use cardboard seals at the ends of the filters; cardboard seals can deteriorate or leak. Our filters use a thin piece of rubber that provides a tight, even seal at the base of the filter. It prevents unfiltered oil from bypassing the filter media and re-entering your system. 5 Metal End Caps and Center Tubes Solid metal components provide additional strength to the filter element. Metal is superior to the cardboard that many manufacturers use. 4 1 5 2 3 Competitive Media MICROLOC Media Each layer of MICROLOC is made from continuous polymeric fibers that vary in diameter to provide superior filtration, durability and filter life not available in traditional media. OEM Specified. Our filters meet all CNH engineering specifications. When you buy a CNH Original Parts filter, you re buying the confidence that our engineers have placed in the filter to protect your engine and save you repair costs. By using ULTRA filters with MICROLOC media, your engine systems will receive the best filtration performance available today. Your filters will remove the small, high wear-causing particles from the minute they are installed until the minute they are removed. Other filter manufacturers may claim to provide superior protection, but there is nothing that protects your equipment like CNH Original Parts ULTRA filters with MICROLOC. 18 19 CNH-1015_MaintProducts_Case_r16.indd 18-19 11/12/10 3:10 PM

FILTRATION PRODUCTS FUEL FILTRATION Few things will impact your productivity faster than a poor quality fuel filter. Fine filtration, long life and efficient water removal are vital to keeping your equipment in the field and on the job. Sure, there are other filters on the market today that will fit your engine, but there is only one line that s designed specifically for your Case IH equipment. These fuel filters are guaranteed to provide maximum protection for your engine s high-performance injectors and fuel pump systems. The extremely high injection pressures and small injector orifices in today s low-emissions engines make fuel filters more critical than ever. Demand the best protection for your equipment investment. Demand CNH Original Parts filtration. CNH Original Parts fuel filters:» Patented self-venting drain valve on fuel/ water separators» Proprietary media» Higher efficiency without loss of capacity» Better injection protection» Dramatically improved removal of both free and emulsified water» Increased service life It doesn t take much dirt to clog a fuel system and you work in a lot of dirt. Choose the best protection. Hydraulic FILTRATION High-performance synthetic media has become increasingly common in our hydraulic and transmission filters. This media provides maximum protection against wear, longer filter life and less pressure drop compared to conventional media. As today s applications are even more demanding, the need for this highperformance synthetic media is even more important. That s why our hydraulic filters are synthetic, delivering the optimum balance of efficiency, capacity and pressure drop. Advantages include:» Lower pressure drop» Customized efficiency for application» Complete system design, head and filter» Exact replacement each and every time» Maximum dirt-holding capacity (longer service life)» Greater temperature operating range» Compatibility with new synthetic and environmentally friendly oils» Premier o-ring seal» Continuous element quality control testing:» Multipass» Pressure fatigue» Pressure drop» Vibration» Baffle torque» Burst element collapse» Element cleanliness filter capacity (GRAMS) cnh ADVANTAge AVg. PRESSURE AT FAILURE (PSID) cnh MIN. SPEC (PSID) cnh ADVANTAge COMPETITOR 130 48% 189 greater CNh 193 CAPACITY 239 200 26% STRONgER * Results from a field test of CNH Original Parts filter (87413809) versus a competitive filter. Dirt Loading Test ISO 16889. Media Rupture Test ISO 2941. 20 21 CNH-1015_MaintProducts_Case_r16.indd 20-21 11/12/10 3:10 PM

FILTRATION PRODUCTS AIR FILTRATION FLEETGUARD FILTERS Your engine is equipped with an air cleaner housing with filter elements, integral precleaner and intake ducting. All perform a certain function. For example, the intake ducts deliver air to the precleaner, which takes out 75-94% of the heavy, coarse dust before air reaches the primary element in the air cleaner housing. Dust that reaches the primary element has a far greater chance of entering your engine if you re not using genuine CNH Original Parts filters. Our filters offer the following advantages:» Highest efficiency product available» Designed and supplied as a complete system» Exact replacement each and every time» Continuous element media» Quality control testing for:» Efficiency» Wet and dry strength» Burst strength Our all-makes filter program offers a comprehensive line of FLEETGUARD air, coolant, fuel, hydraulic and lube filtration products for all vehicle applications. The FLEETGUARD product line allows us to offer you a one-stop shop for all your filter needs. Fleetguard Features and Benefi ts» Advanced and innovative filtration products» Meets Original Equipment Manufacturer s specifications» 24/7 customer assistance and service engineering support More than 5,000 products available:» All brands of agricultural and construction equipment» Automotive applications» Industrial engines» Lawn equipment» Motorcycles» ATVs» Boats» Pleatloc media spacing for improved loading/field life» Deeper end covers for more effective potting of media» Urethane seals and molded-in-place gaskets» Advanced Radialseal provides a leak-free seal in rough conditions» Improved contaminant encapsulation dust and dirt won t dislodge during service ACTIVATED CARBON FRESH AIR CAB FILTERS When working in the field, visibility and air quality can impact an operator s performance and health. These combination dust and odor filters provide the ultimate in contamination filtration and are the only ones that Case IH Engineering has approved for use with Case IH equipment.» Activated carbon-impregnated media absorbs odors before reaching the operator» Synthetic media captures dust, pollens and other allergens without air flow restriction» Easy to install and remove without modification to existing housing» No mess carbon is bonded to the filter media so there s no need to add loose carbon refill 22 23 CNH-1015_MaintProducts_Case_r16.indd 22-23 11/23/10 1:14 PM

COOLANT/ANTIFREEZE XHD HEAVY-DUTY COOLANT/ANTIFREEZE Major diesel engine manufacturers estimate that more than 50% of engine failures are cooling system related. Worn rings, scuffed pistons, cracked heads and corroded bearings may appear to have nothing in common with the cooling system, when in fact, these problems are often the symptoms of improper cooling system maintenance. Using XHD, a heavy-duty coolant formulated for use with off-road equipment, will help you avoid premature engine failure. Cheaper products have costlier consequences Premix also available As diesel engines operate, vibration of the cylinders creates microscopic bubbles in the coolant that attach to the cylinder liners. These bubbles can implode with a force of over 15,000 PSI. This collapse can blast small holes in the cylinder liner. Without the protection of a heavy-duty coolant, the result is liner cavitation. Over time, liner cavitation can allow coolant to enter the engine oil. This compromises the lubrication of the engine oil and results in excess friction, which ultimately leads to engine failure. Many competitive coolants don t provide adequate protection against this. XHD offers superior liner cavitation protection by covering internal parts with an oxide film that takes the abuse of implosions to avoid premature engine failure. XHD Features and Benefits:» Superior liner cavitation protection» Long-term corrosion protection for all cooling system metals, including aluminum, brass, cast iron, steel, solder and copper» Extends water pump life» Compatible with conventional coolants (mixing or diluting with nonequivalent coolants will reduce protective properties)» Recommended for diesel, gasoline and natural gas engines B30204 XHD PREMIX 1 GAL./3.785 L. B30205 XHD PREMIX 2.5 GAL./9.46 L. B30206 XHD PREMIX 55 GAL./208.19 L. B30207 XHD PREMIX 330 GAL./1249.2 L. B30201 XHD CONCENTRATE 1 QT./.95 L. B30202 XHD CONCENTRATE 55 GAL./208.19 L. B30203 XHD CONCENTRATE 330 GAL./1249.2 L. Imploding bubbles damage liners......which can cause cavitation» Phosphate free to reduce scale deposits» Protects against winter and minimizes the chance of summer boilover Formulated with Bitrex This bittering agent reduces» Available in concentrate and 50/50 premix, which contains the likelihood of accidental demineralized, reverse osmosis-treated water with freeze animal ingestion. 24 protection to -34 F/-37 C 25 CNH-1015_MaintProducts_Case_r16.indd 24-25 11/12/10 3:11 PM

FLUID ANALYSIS SYSTEMGARD YOUR OUNCE OF PREVENTION Imagine being able to see exactly what s happening inside an engine, a gearbox or hydraulic system Your Case IH equipment is designed to meet your operational needs for many years to come, and chances are you did your homework before deciding to make your investment. SYSTEMGARD Fluid Analysis is a preventive maintenance tool that protects that investment by providing a picture of both the fluid condition and the internal condition of a component or system without disassembly.» Extend oil drain intervals Monitoring the condition of the oil optimizes drain intervals so that you get the most out of the fluid you re paying for. Fewer oil changes minimize maintenance costs and maximize uptime.» Extend equipment life Monitoring system cleanliness and filtration efficiency allows you to keep your equipment longer and significantly reduce replacement costs.» Identify minor problems before they become major failures State-of-the-art fluid analysis identifies dirt, wear particles, fuel dilution and coolant contaminants that can cause catastrophic failure or significantly shorten equipment life.» Maximize asset reliability Testing and analysis ensures that units are up, running and making money.» Increase resale value Analysis results provide valuable sampling histories that easily justify higher equipment resale values. Taking Samples Using SYSTEMGARD Fluid Analysis for regular sampling and Trend Analysis (monitoring test data over an extended period of time) will provide the information you need to continually maximize asset reliability and, ultimately, increase company profits. Samples should be taken while the systems are operating under normal conditions or immediately after shutdown while they are still at operating temperature. Samples should also be taken at regularly scheduled intervals and from the same sampling point each time. Oil Sample Kits Kits provide advanced diagnostic, preventive maintenance testing designed to evaluate lubricant condition, component wear and contamination in engines, hydraulic systems and transmissions. OIL TEST PACKAgES Application Engines Hydraulics Part Number CC2735QS CC2736QS Test 24 Metals by ICP % Fuel Dilution % Soot Water by Crackle Viscosity @ 40 C Oxidation/Nitration by FTIR Particle Count (Gearboxes receive Direct Read Ferrography) Why Systemgard? SYSTEMGARD laboratories are ISO 17025 A2LA accredited the highest level of quality attainable by a testing laboratory backed by the most stringent accrediting body in the industry. This means with SYSTEMGARD, you can be confident that the results you receive are accurate, repeatable and traceable to a superior standard.» Each test report provides severity codes and troubleshooting recommendations» Severe findings are communicated immediately via phone, fax or e-mail» Results are available through Horizon online almost immediately after sample processing is complete Fuel Sample Kits Evaluate the quality of fuel in your equipment and storage tanks to minimize mechanical problems due to fuel contamination, avoid unnecessary or incorrect repairs, and improve maintenance scheduling. FUEL TEST PACKAgES 26 27 Kit Package Advanced Diesel Fuel Kit Diesel Fuel Cleanliness Kit Microbe Test Kit Part Number SGDF1 SGDF2 SGDF3 Test Elemental Metal by ICP Particle Count Sulfur Water by Carl Fischer, ppm Bacteria, Fungi and Mold Cetane Index Distillation API Gravity Flash Point Thermal Stability CNH-1015_MaintProducts_Case_r16.indd 26-27 11/12/10 3:11 PM

PM-15170 2010 CNH America LLC. CNH, Case and Case IH are registered trademarks of CNH America LLC Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies. All rights reserved. Printed in USA. www.caseih.com www.casece.com SOLD AND SERVICED By: CNH-1015_MaintProducts_Case_r16.indd 28 11/12/10 3:11 PM