Safety Stations SS902 Safety Station with Eyewash, Stainless Steel Bowl SS902P Safety Station with Eyewash, Plastic Bowl application: Combination eyewash and shower safety station. Two GS-Plus spray-type outlet heads deliver a flood of water for rinsing eyes. shower head: 10" diameter orange ABS plastic. shower valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and TFE seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod. spray head assembly: Two GS-Plus spray heads. Each head has a flip top dust cover, internal flow control and filter to remove impurities from water. eyewash bowl: 11 1/2" daimeter. Bowl is stainless steel (SS902) or orange ABS plastic (SS902P). eyewash valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and TFE seals. pipe and fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance. supply: 1 1/4" NPT female top or side inlet. waste: 1 1/4" NPT female outlet. Outlet can be positioned at either or 20" above finished floor by reversing lower pipe nipples. sign: Furnished with ANSI-compliant identification sign. quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment. Available Options PCC All-polished chrome plated brass construction. SSC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green. FC20 Flow control to regulate shower flow rate to 20 GPM. SSH Stainless steel shower head. H FC Hand and foot control. Eyewash is activated by flag handle or foot treadle AP275-205 Electric Light And Alarm Horn Light and alarm horn summon assistance when eyewash or shower is activated. AP250-015 Modesty Curtain Modesty curtain for mounting on safety station. TMV AP3800 thermostatic mixing valve precisely blends hot and cold water to deliver tepid water as required by ANSI Z358.1-2009.
Safety Stations SS902 Safety Station with Eyewash, Stainless Steel Bowl SS902P Safety Station with Eyewash, Plastic Bowl ACTUATING ARM 24" ( 610 mm ) 1-1/4" NPT ABS PLASTIC SHOWER HEAD AND ELBOW 29" ( 737 mm ) ø10" ( 254 mm ) 23-1/2" ( 597 mm ) 1" IPS CHROME PLATED BRASS STAY- OPEN BALL VALVE 90" ( 2289 mm ) 6-1/2" ( 165 mm ) STAINLESS STEEL BOWL PULL ROD ( 2 ) GS-PLUS SPRAY HEADS POWDER COATED CAST ALUMINUM FLAG HANDLE GALVANIZED STEEL PIPE AND FITTINGS ø11-1/2" ( 292 mm ) 66" ( 1676 mm ) 1-1/4" IPS ( PLUGGED ) 1/2" IPS CHROME PLATED BRASS STAY-OPEN BALL VALVE 6" ( 152 mm ) 9-1/4" ( 235 mm ) 36" ( 914 mm ) 31" ( 787 mm ) DETAIL A UNIVERSAL FLOOR FLANGE 9" ( 229 mm ) POWDER COATED CAST ALUMINUM FLOOR FLANGE ( DETAIL A ) ø7/16" MOUNTING SLOTS ON 7-5/ BOLT CIRCLE ( SEE NOTE 2 ) 1-1/4" NPT FEMALE OUTLET NOTES: 1. EACH GS-PLUS SPRAY HEAD HAS A FLIP-TOP DUST COVER, INTERNAL FLOW CONTROL AND FILTER TO REMOVE IMPURITIES FROM THE WATER FLOW. 2. OUTLET TEE CAN BE POSITIONED AT EITHER OR 20" A.F.F. BY REVERSING PIPE NIPPLES ABOVE AND BELOW LOWER TEE. this space for architect/engineer approval Sign Included Due to continuing product improvement, the information contained in this document is subject to change without notice. All dimensions are ± 1/4" (6mm). ETL Listed 101496. Units have been tested to and comply with ANSI Z358.1-2009
Safety Stations SS902BC Safety Station with Eyewash, Stainless Steel Bowl and Cover application: Combination eyewash and shower safety station. Eyewash has stainless steel cover to protect bowl from dust, dirt and other contaminants. Cover is raised automatically when flag handle is activated. Cover closes when handle is returned to closed position. Two GS-Plus spray-type outlet heads deliver a flood of water for rinsing eyes. shower head: 10" diameter orange ABS plastic. shower valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and TFE seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod. spray head assembly: Two GS-Plus spray heads. Each head has an internal flow control and filter to remove impurities from water. eyewash bowl: 11 1/2" stainless steel with stainless steel cover. eyewash valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and TFE seals. pipe and fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance. supply: 1 1/4" NPT female top or side inlet. waste: 1 1/4" NPT female outlet. Outlet can be positioned at either or 20" above finished floor by reversing lower pipe nipples. sign: Furnished with ANSI-compliant identification sign. quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment. Available Options PCC All-polished chrome plated brass construction. SSC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green. FC20 Flow control to regulate shower flow rate to 20 GPM. SSH Stainless steel shower head. AP275-205 Electric Light and Alarm Horn Light and alarm horn summon assistance when eyewash or shower is activated. AP250-015 Modesty Curtain Modesty curtain for mounting on safety station. TMV AP3800 thermostatic mixing valve precisely blends hot and cold water to deliver tepid water as required by ANSI Z358.1-2009.
Safety Stations SS902BC Safety Station with Eyewash, Stainless Steel Bowl and Cover ACTUATING ARM 24" ( 610 mm ) 1-1/4" NPT ABS PLASTIC SHOWER HEAD AND ELBOW 29" ( 737 mm ) ø10" ( 254 mm ) 23-1/2" ( 597 mm ) 1" IPS CHROME PLATED BRASS STAY-OPEN BALL VALVE 90" ( 2289 mm ) PULL ROD ( 2 ) GS-PLUS SPRAY HEADS GALVANIZED STEEL PIPE AND FITTINGS ø11-1/2" ( 292 mm ) 1-1/4" NPT ( PLUGGED ) BOWL COVER 6-1/2" ( 165 mm ) POWDER COATED CAST ALUMINUM FLAG HANDLE 1/2" IPS CHROME PLATED BRASS STAY-OPEN BALL VALVE STAINLESS STEEL BOWL 6" ( 152 mm ) 34-5/ ( 879 mm ) 9-1/4" ( 235 mm ) 66" ( 1676 mm ) DETAIL A UNIVERSAL FLOOR FLANGE 31" ( 787 mm ) POWDER COATED CAST ALUMINUM FLOOR FLANGE ( DETAIL A ) ( SEE NOTE 2 ) ø7/16" MOUNTING SLOTS ON 7-5/ BOLT CIRCLE 1-1/4" NPT FEMALE OUTLET NOTES: 9" ( 229 mm ) 1. EACH GS-PLUS SPRAY HEAD HAS A FLIP-TOP DUST COVER, INTERNAL FLOW CONTROL AND FILTER TO REMOVE IMPURITIES FROM THE WATER FLOW. 2. OUTLET TEE CAN BE POSITIONED AT EITHER OR 20" A.F.F. BY REVERSING PIPE NIPPLES ABOVE AND BELOW LOWER TEE. this space for architect/engineer approval Sign Included Due to continuing product improvement, the information contained in this document is subject to change without notice. All dimensions are ± 1/4" (6mm). ETL Listed 101496. Units have been tested to and comply with ANSI Z358.1-2009
Barrier-Free Units ESBF635 Barrier-Free Emergency Shower, Vertically Mounted application: Handicapped accessible emergency shower for vertical mounting. Unit should be installed so that shower head is at least 82" above floor and 32" from wall or nearest obstruction. ada compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons (maximum height and reach and distance from obstructions). shower head: 10" diameter orange ABS plastic. valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and TFE seals. Furnished with stainless steel actuating arm and 59 1/2" stainless steel pull rod. supply: 1" NPT female inlet. sign: ANSI-compliant identification sign. Available Options SSH Stainless steel shower head. PCH Polished chrome plated cast brass shower head. FC20 Flow control to regulate shower flow rate to 20 GPM. SC Self-closing ball valve. Note: Emergency showers with self-closing valves do not comply with ANSI Z358.1-2009. TMV AP3800 thermostatic mixing valve precisely blends hot and cold water to deliver tepid water as required by ANSI Z358.1-2009. Refer to Tempering Units section for complete technical and product selection information.
Barrier-Free Units ESBF635 Barrier-Free Emergency Shower, Vertically Mounted ACTUATING ARM 1" NPT 1" IPS STAY-OPEN BALL VALVE ABS PLASTIC SHOWER HEAD 59-1/2" ( 1511 mm ) ø10" ( 254 mm ) 90" - 104" ( 2286-2642 mm ) TO FINISHED FLOOR PULL ROD 82" - 96" ( 2083-2438 mm ) TO FINISHED FLOOR PULL ROD ROTATED 90º FOR VIEWING 4 ( 1219 mm ) MAX TO FINISHED FLOOR this space for architect/engineer approval Sign Included Due to continuing product improvement, the information contained in this document is subject to change without notice. All dimensions are ± 1/4" (6mm). ETL Listed 101496. Units have been tested to and comply with ANSI Z358.1-2009
Barrier-Free Units ESBF643 Barrier-Free Emergency Shower, Horizontally Mounted application: Handicapped accessible emergency shower for horizontal mounting. Unit should be installed so that shower head is at least 82" above floor and 32" from wall or nearest obstruction. ada compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons (maximum height and reach and distance from obstructions). shower head: 10" diameter orange ABS plastic. valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and TFE seals. Furnished with stainless steel actuating arm and 59 1/2" stainless steel pull rod. pipe and fittings: 1" IPS galvanized steel nipple with orange ABS plastic elbow. supply: 1" NPT female inlet. sign: ANSI-compliant identification sign. Available Options SSH Stainless steel shower head. PCH Polished chrome plated cast brass shower head. FC20 Flow control to regulate shower flow rate to 20 GPM. SC Self-closing ball valve. Note: Emergency showers with self-closing valves do not comply with ANSI Z358.1-2009. TMV AP3800 thermostatic mixing valve precisely blends hot and cold water to deliver tepid water as required by ANSI Z358.1-2009. Refer to Tempering Units section for complete technical and product selection information. APBF250-015 Modesty Curtain Modesty curtain for barrier-free horizontal shower installation.
Barrier-Free Units ESBF643 Barrier-Free Emergency Shower, Horizontally Mounted 27-1/2" ( 699 mm ) 5-3/4" ( 146 mm ) ACTUATING ARM GALVANIZED STEEL PIPE 1" NPT ø10" ( 254 mm ) ABS PLASTIC SHOWER HEAD AND ELBOW 1" IPS CHROME PLATED BRASS STAY-OPEN BALL VALVE 59-1/2" ( 1511 mm ) 82" - 96" ( 2083-2438 mm ) TO FINISHED FLOOR PULL ROD 4 ( 1219 mm ) MAX TO FINISHED FLOOR PULL ROD ROTATED 90º FOR VIEWING this space for architect/engineer approval Sign Included Due to continuing product improvement, the information contained in this document is subject to change without notice. All dimensions are ± 1/4" (6mm). ETL Listed 101496. Units have been tested to and comply with ANSI Z358.1-2009