Petroleum Pumps: Bio-diesel Fuel Oil Kerosene Aviation Gasoline Diesel Jet A / JP-8 Gasoline Ethanol E 85.

Similar documents
FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8

High Performance Pumps, Quality Service, Quality People...Pioneer Pump!

Berkeley Cast Iron Impeller B1-1/2ZPH ELECTRIC MOTOR DRIVE. Threaded Case (NPT), Packing Construction. Table I. Table II

Godwin Wet-Prime. Think Orange. Think Godwin. Great Pumps. Great People.

CENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES

ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.

Models 9202C, 9203C, 9252C-C, and 9253C-C

CASING COVER PLATE LUBRICATION GASKETS PRESSURE RELIFE VALVE SEAL OPTIONAL EQUIPMENT

Product Information / Order Code

Ball Valves. Features

Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining

SHURflo Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron

GMP Bare Shaft Semi Trash Pumps. Applications: GB6XR-A/W ASBR x GB8XR-A/W ASDV x

Ball Valves. Features

ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.

Series Split Coupled Vertical In-Line Pumps

1SV (e-sv) 60 Hz 3500 RPM

M03 Series. Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 1200 psi (83 bar) for Metallic Pump Heads

Vulcan Parallel Spring O -Ring Mounted Seals. Section

ENGINE DRIVEN CENTRIFUGALS. franklinwater.com

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron

1SV (e-sv) 50 Hz 2900 RPM

EN. 850 Filtrate Pumps. Technical Specification Pages

Manufacturer of precision helical gear pumps for a wide range of industrial applications

CENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES

S Series PACER Pumps. PACER Pumps 5/91 Page 1 of 5. Dultmeier Sales for Omaha, NE or for Davenport, IA

Ball Valves. Features

SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS

High Capacity Centrifugal & Sprinkler Pumps

High Temperature Air-Cooled Hot Oil Pumps

Bulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS

D51 D61 D71 D91 Series

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

REPAIR SEALS AND OPTIONS

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service

PISTON PUMPS Q U A L I T Y S I N C E

Ball Valves. Full Ported Very low pressure drop. Polyamide Thrust Bearings Low actuation torque and high

Worldwide, our pumps get the job done. Corporate Headquarters North America, South America, Asia and Australia Sales

High Temperature Air-Cooled Hot Oil Pumps

Patent Pending. High Performance Self-Priming. Centrifugal Trash Pumps.

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS

Engineering Data Pack L/4100 Series Pumps

Series 4XSHV. Specifications: Series: 4XSHV , 3450RPM, 60Hz 2-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling

DPS. The SSV Dual Pump System

Series 6XSHD. Specifications: Series: 6XSHD 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

Series 4XSHM 18 Frame Driver 3" Spherical Solids Handling

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

Series 4XSHD. Specifications: Series: 4XSHD 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling

NBE40-125/139 AS-F2-A-BAQE

C SERIES ENGINEERING DATA PACK

FKL PUMP HEAD ASSEMBLY

GH General Horizontal, Close Coupled and Frame Mounted Pumps

RELIANCE G6200 MECHANICAL FLEET DISPENSER

Engineering Data Pack C Series and 4300 Series Pumps

CENTRIFUGAL PUMPS GAS ENGINE FTSP FEATURES APPLICATIONS SPECIFICATIONS

A complete line of pumps specifically designed for pumping clean, non-abrasive petroleum products.

Basic Hydraulic Features. Basic Mechanical Features

Series PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice.

VEM3546 1HP 1800RPM 3PH 56C Tefc Motor. Features. Description. Manufacturer Information

INDUSTRIAL PRODUCTS 2010 CATALOG

TPE /4-A-F-A-BAQE 3X400 50HZ

High Pressure Ball Valves Series BVHP. General Description. Operating. Specifications. Features. Performance Curves

Table of Contents PRICE LIST PRODUCT PAGE PUMPS PWM Controlled Hydraulic Pumps A-4 GEMINI Dual Pump Kit A-5 FMC-75-HYD Series A-6 FMC-HYD Series A-6

3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

Series 8SHDU. Specifications: Series: 8SHDU 25-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3.50" Spherical Solids Handling

Marine Gasoline Products

Drive Motor Type 3 (115/230V, 1 Phase TEFC) Motor Type 4 (230/460V, 3 Phase TEFC) Options Description Price Adders

Pride in Performance

Vulcan Parallel Spring Diaphragm Type Seals. Section

Company name: GRUDNFOS VisMin Created by: Kimmboy Ancis Phone: Date: 13/03/2017

2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

GB REPAIR PARTS REPAIR PARTS RGB R3

PUB-PMPFL rev. 4/2007

TPE /2-S-A-F-A-BAQE 3X400 50HZ

Centrifugal Pumps. Distributed by: 7033 Telford Way #20, Mississauga, ON L5S 1V4 Tel: Toll Free:

CENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES

- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX

G&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304

NKE80-160/175A2F2AE-SBQQE

BERKELEY SSCX SERIES CENTRIFUGAL PUMPS

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps

R SERIES RADIAL BLADE IMPELLERS - STEELS, STAINLESS STEELS, & ALUMINUM

Series 6SHV. Specifications: Series: 6SHV 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304

Series 706 Butterfly Valves (300 PSI/2065 kpa)

TECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP

Centrifugal Pump Warranty Guide

DESCRIPTION MAINTENANCE. Specifications Information and Repair Parts Manual thru 282D-95 & thru 282M-95

EBARA Self Priming Trash Pump. Type EFQT-EFQU

TECHNICAL BROCHURE BMPVN MPVN HIGH PRESSURE MULTI-STAGE PUMPS

TPED /4-S-A-F-A-BAQE 3X400 50HZ

Series 6SHM. Specifications: Series: 6SHM 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

Oceanic. 4 Deep Well Submersible Pump Performance chart. Features & Technical Specifications: Part # MA0343X-4. Head (ft) MA0343X-4A.

Specifications Information and Repair Parts Manual , , , &

TPE N-A-F-A-GQQE

Transcription:

Petroleum Pumps: Bio-diesel uel il Kerosene viation Gasoline Diesel Jet / JP-8 Gasoline Ethanol E 85 www.mppumps.com

Model PG Pumps ompatible or Gasoline, Kerosene, vgas & Jet uel he "PG" model is available in Pedestal mount for flexible coupling or lose oupled mount to ace lass I Group D electric motors. is the standard construction for the volute and adapter. he open impeller is standard in cast iron construction with aluminum as an optional material. tandard material for the wear plate is aluminum. he standard self-lubricated mechanical seal is equipped with a carbon rotating face, viton elastomer and stainless steel spring. he stationary face is silicon carbide. MDE IZE MIG VE IMPEE PG 8 2" X 2" DD MEI I PI MEI PE ast Iron ork/itrile PG 8 2" X 2" Pedestal ast Iron ork/itrile PG 2" X 2" PG 3" X 3" ast Iron ork/itrile ast Iron ork/itrile PG 3" X 3" Pedestal ast Iron ork/itrile PG 3" X 3" Pedestal ast Iron ork/itrile PG 4" X 4" Pedestal ast Iron ork/itrile GKE E VE IMPEE PE

Model P Pumps ompatible or BioDiesel, uel il & Diesel he "P" model mounting offerings for fuel oil and diesel fuel applications include both Pedestal mount for flexible coupling and lose oupled mount to ace, E electric motors. ast Iron is the standard construction for the volute, adapter and open impeller. tandard material for the wear plate is steel. he volute is also available in ductile iron. he standard self-lubricated 1 mechanical seal is equipped with a carbon rotating face, viton elastomer and stainless steel spring. he stationary face is i-esist. MDE IZE MIG VE IMPEE DD MEI I PI MEI PE P 8 2" X 2" E ast Iron ast Iron teel ork/itrile P 8 2" X 2" Pedestal ast Iron ast Iron teel ork/itrile P 2" X 2" E ast Iron ast Iron teel ork/itrile P 3" X 3" E ast Iron ast Iron teel ork/itrile P 3" X 3" Pedestal ast Iron ast Iron teel ork/itrile P 3" X 3" Pedestal ast Iron ast Iron teel ork/itrile P 4" X 4" Pedestal ast Iron ast Iron teel ork/itrile GKE E VE IMPEE 1 1 1 1 1 1 1 PE

Model PE Pumps ompatible or Ethanol & E 85 he "PE" model is available in Pedestal mount for flexible coupling or lose oupled mount to ace lass I Group D electric motors. is the standard construction for the volute and adapter. he open impeller is standard in cast iron construction with as an optional material. tandard material for the wear plate is steel. he standard self-lubricated mechanical seal is equipped with a carbon rotating face, viton elastomer and stainless steel spring. he stationary face is silicon carbide. MDE IZE MIG VE IMPEE DD MEI I PE PE 8 2" X 2" ast Iron teel ork/itrile PE 8 2" X 2" Pedestal ast Iron teel ork/itrile PE 2" X 2" ast Iron teel ork/itrile PE 3" X 3" ast Iron teel ork/itrile PE 3" X 3" Pedestal ast Iron teel ork/itrile PE 3" X 3" Pedestal ast Iron teel ork/itrile PE 4" X 4" Pedesta ast Iron teel ork/itrile PI MEI GKE E VE IMPEE PE

MP Pumps elf Priming Petroleum Pumps MP Pumps has specifically reengineered its popular lomax elf-priming eries for compatibility with clean, non-abrasive petroleum products. ransfer and delivery of various fuels such as gasoline, ethanol, biodiesel, and fuel oils are just a few of the petroleum based products the lomax eries is suitable for handling. ong recognized as the leader in self-priming applications, the lomax eries addresses today's fuel market by offering: ive (5) performance models. Various drive options. pecific mechanical seal offerings. Materials of construction compatible for three (3) distinct fuel classifications. By classifying various fuels into three (3) distinct segments, MP Pumps can recommend that its design is capable of handling the specific fuel groups without incurring the additional cost associated with one pump for all fuels. GKE, GE MEI K/IIE PEME IZE IVE (5) VIBE VE MEI I DIE I PE MEI EE MIM DPE MEI I DIE I IMPEE MEI I MIM MEHI E MEI PE 21 VI/B/IEI/ PE 2 VI/B/II BIDE/ MIG PI PEDE (HW) E PD. EEI M - E - EXPI P I GP D

BI MEE PE H 8 1 16 MDE 8,,, PE. GVI.8 IMP. DI. PEED 345 PM 6 HED - EE 5 8 5 6 7 8 G PE MIE PEME VII. 3 8 7.5 PH 25 5 HEPWE PH HED - MEE HED - EE 5 BI MEE PE H 6 8 1 1 8 8 PEME VII..5 1 1.5 3 5 MDE 8,,, PE. GVI.8 IMP. DI. PEED 175 PM HEPWE 7.5 8 16 2 3 48 56 6 G PE MIE PH PH 5 HED - MEE orm 8138 (6-8)