Section A Straight Blade Devices Index Rating Type Page Number Features and Benefits Heavy Duty Receptacles A-5 15A 125V 2P 2 Non-grounding devices A-6 20A 250V 2P 2 Non-grounding devices A-6 15 & 20A 125V 2P 3 Heavy Duty duplex receptacles A-7 8 15 & 20A 125V 2P 3 Hospital rade duplex receptacles A-9 15 & 20A 125V 2P 3 Hospital rade, special purpose duplex receptacles A-10 15 & 20A 125V 2P 3 Heavy duty and Hospital rade single receptacles A-11 Features and Benefits Compact Receptacles A-12 15 & 20A 125V 2P 3 Compact duplex and single receptacles A-13 Features and Benefits 4-PLEX Receptacles A-14 15 & 20A 125V 2P 3 4-PLEX receptacles and accessories A-15 15 & 20A 125V 2P 3 Style Line duplex receptacles A-16 15 & 20A 125V 2P 3 Commercial duplex receptacles A-17 18 Features and Benefits INSULRIP Plugs and Connectors A-20 15 & 20A 125V 2P 3 Insulgrip Heavy Duty plugs A-21 15 & 20A 125V 2P 3 Insulgrip Heavy Duty connector bodies A-22 Features and Benefits ELASTORIP Plugs and Connectors A-23 15 & 20A 125V 2P 3 Elastogrip plugs and connectors A-24 Features and Benefits VALISE Plugs A-25 15 & 20A 125V 2P 3 Valise plugs and connectors A-26 15 & 20A 125V 2P 3 Flanged inlets and flanged receptacles A-27 15 & 20A 125V 2P 3 Miscellaneous and combination receptacles A-28 15 & 20A 250V 2P 3 Heavy Duty receptacles A-29 15 & 20A 250V 2P 3 Plugs and flanged inlets A-30 15 & 20A 250V 2P 3 Connectors and flanged receptacles A-31 15A 277V 2P 3 Receptacle, plug and connector A-32 30 & 50A 125V 2P 3 single receptacles and plugs A-33 30 & 50A 250V 2P 3 single receptacles and plugs A-33 30 & 50A 277V 2P 3 single receptacles and plugs A-33 20A 125/250V 3P 3 Non-grounding single receptacles and plugs A-34 30 & 50A 125/250V 3P 3 Non-grounding single receptacles and plugs A-35 20A 125/250V 3P 4 Receptacles and plugs A-36 Features and Benefits Heavy Duty INSULRIP devices A-37 30, 50, 60A 125/250V 3Ø 250V 3P 4 Receptacles and plugs A-38 20, 30, 50, 60A 3Ø YE 120/208V 4P 4 Non-grounding receptacles and plugs A-39 16A 250V 2P 3 I.E.C. 320 appliance couplers A-40 15 & 20A 125V and 250V 2P 3 Acceptor Hazardous location plugs and receptacles A-41 15 & 20A 125V and 250V Single and duplex cover plates A-42 15 & 20A Accessories eatherproof boots and lift covers, PLUOUT devices A-43 30 & 50A Accessories Cover plates, weatherproof lift covers A-44 30, 50, 60A Accessories Cover plates, weatherproof lift covers A-45 Technical information A-46 52 Straight Blade Devices Index
Straight Blade Receptacles
Straight Blade Receptacles Heavy Duty Duplex and Single Receptacles Product Features and Benefits One piece brass mounting strap. Reinforced thermoplastic polyester base. Patented bypass power contacts. Brass center rivet. Exclusive external wiring clamps: #8 brass terminal screws. Impact resistant nylon face. Quality in Design The Hubbell philosophy of design is based on an overriding commitment to performance not just in the laboratory, but in the real world. No Hubbell device exemplifies this philosophy more than the 5262 duplex receptacle. hile all Hubbell receptacles are designed to withstand abusive environments, none can match the total performance of the 5262. It is the ultimate receptacle for factories, schools, office buildings, hotels and motels, shopping centers-wherever there are people who take it for granted that a receptacle will be safe and reliable. One piece mounting strap with integral ground contacts. The safest, most reliable design for a low resistance flow of fault currents. Oversized bell shape at the bottom of the ground contacts helps minimize damage to the grounding system during abrupt pullout. Reinforced thermoplastic base provides superior thermal, electrical and mechanical properties. This high tech material provides impact resistance and resists heat buildup, giving you long lasting performance. The patented bypass contact design incorporates high-conductivity materials with superior spring characteristics for increased contact force and secure connections. Improved contact performance reduces heat buildup, and ensures a reliable, uninterrupted flow of power. External wiring clamps feature large head brass screws (#8) for superior torque values. Visible brass terminal screws and clamps, with a unique strand containment feature, ensure 100% clamping of wire strands, eliminating heat buildup that can burn out terminals on others receptacles. Heavy Duty Receptacles Features and Benefits A-5
2 Pole, 2 ire Non-rounding 15 and 20 Ampere, 125 and 250 Volts Plugs, Connector Bodies and Receptacles 1.68" (42.7) 1.25" (31.8).88" (22.4) Valise Plugs 15A, 125V IP20 SUITABILITY NEMA 1-15P 15A 125V 0.5 HP NEMA 1-15R 15A 125V.88" (22.4) HBL5865VY 2.38" (60.5) HBL5869VY 1.25" (31.8) Cord Dia. Catalog Numbers Yellow nylon, non-polarized..218-.385" HBL5865VY (5.5-9.8) Yellow nylon, non-polarized..218-.385" HBL5865VYCN* (5.5-9.8) Yellow nylon, polarized..218-.385" HBL5866VY (5.5-9.8) Yellow nylon, polarized..218-.385" HBL5866VYCN* (5.5-9.8) Valise Connector Bodies Cord Dia. Catalog Numbers Yellow nylon..218-.385" HBL5869VY (5.5-9.8) Yellow nylon..218-.385" HBL5869VYCN* (5.5-9.8) *Note: Catalog numbers listed above with suffix CN have combination Robertson/ slotted head terminal and cord clamp screws. All others have slotted screws. IP20 SUITABILITY 1.50" (38.1) 20A, 250V NEMA 2-20P 20A 250V UL Listed 2 HP NEMA 2-20R 20A 250V UL Listed 2 HP 1.88" (47.8) HBL9758VY Cord Dia. Catalog Numbers Valise plug, yellow nylon..220-.660" HBL9758VY (5.6-16.8) Receptacle, single, black phenolic. HBL5552B Note: Horsepower ratings are AC only and apply to plugs and receptacles only. 1.39" (35.3) 1.14" (29.0) HBL5552B A-6
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts Heavy Duty, Specification rade, Duplex Receptacles 15A only Heavy Duty, Specification rade, Duplex Receptacles Color Catalog Numbers Flush, nylon face, back and side wired, Brown HBL5262 HBL5362 slotted screws. Ivory HBL5262I HBL5362I ray HBL5262Y HBL5362Y hite HBL5262 HBL5362 Red HBL5262R HBL5362R Black HBL5262BK HBL5362BK Flush, nylon face, back and side wired, Brown HBL5262CN Robertson/slotted screws. Ivory HBL5262ICN ray HBL5262YCN hite HBL5262CN Red HBL5262RCN Accepts 20A plug only. Heavy Duty, Specification rade, Duplex Receptacles Robertson /slotted screws NEMA 5-15R 15A 125V 0.5 HP Color Catalog Numbers Flush, nylon face, Brown HBL5392CN back and side wired. Ivory HBL5392ICN Isolated ground. Orange I5392CN Notes: See Section for full line of isolated ground devices. Horsepower ratings listed above are AC only. See page A-42 for accessories. See page A-47 for technical information. 5-20R Canadian 20A 125V 1 HP NEMA 5-20R 20A 125V UL Listed 1 HP 1.63" (41.4) HBL5262 1.63" (41.4) HBL5362 1.33" (33.8) 2.72" (69.0).97" (24.6) 2.72" (69.0).97" (24.6).92" (23.3) HBL5392CN 2.72" (69.0) Straight Blade Devices 15A & 20A, 125V, 2P 3 Heavy Duty Receptacles A-7
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts Heavy Duty, Specification rade, Duplex Receptacles 1.33" (33.8) 15A only 2.73" (69.3).80" (20.3) 2.62" (66.5) 2.62" (66.5) I5262 1.81" (46.0) F5262 1.30" (33.0) 1.13" (28.7) 1.13" (28.7) Heavy Duty, Specification rade, Special Purpose Duplex Receptacles NEMA 5-15R 15A 125V 0.5 HP Color Catalog Numbers NEMA 5-20R 20A 125V UL Listed 1 HP Corrosion resistant. Yellow HBL52CM62 HBL53CM62 Ivory HBL52CM62I Brown HBL52CM62BN On 4 (101.6) round cover. Brown HBL5282 Isolated ground (1) Orange I5262 I5362 Orange I5262CN* Ivory I5262I I5362I ray I5262Y I5362Y round fault circuit interrupters (2) Brown F5262 F5362 Ivory F5262I F5362I ray F5262Y F5362Y Red F5262R F5362R hite F5262 F5362 Surge suppression receptacles. (3) Blue HBL5262S HBL5362S Ivory HBL5262IS HBL5362IS ray HBL5262YS HBL5362YS hite HBL5262S HBL5362S Isolated ground and surge Blue I5262S I5362S suppression receptacles. (1)(3) Ivory I5262IS I5362IS ray I5262YS I5362YS hite I5262S I5362S Orange I5262OS I5362OS Notes: (1) See Section for full line of Circuit uard isolated ground devices. (2) See Section for full line of Circuit uard ground fault circuit interrupters. (3) See Section for full line of Circuit uard surge suppression receptacles. *Robertson/slotted head terminal and mounting screws. All others have slotted screws. Horsepower ratings listed above are AC only. See page -55 for accessories. See pages -25 and -54 for technical information. 1.75" (44.4) 1.23" (31.2) HBL5262S 1.30" (33.0) 1.13" (28.7) 2.62" (66.5) 1.75" (44.4) 1.23" (31.2) I5262S A-8
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts Hospital rade and Special Purpose Hospital rade Duplex Receptacles 15A only Heavy Duty, Hospital rade, Duplex Receptacles Color Catalog Numbers Flush, thermoplastic polyester Brown HBL8200 HBL8300 face, back and side wired, Ivory HBL8200I HBL8300I slotted screws. ray HBL8200Y HBL8300Y Red HBL8200R HBL8300R hite HBL8200 HBL8300 Flush, thermoplastic polyester face, Brown HBL8200CN back & side wired, with combination Ivory HBL8200ICN Robertson/ slotted head terminal and ray HBL8200YCN mounting screws. Red HBL8200RCN hite HBL8200CN Heavy Duty, Hospital rade, Special Purpose Duplex Receptacles NEMA 5-15R 15A 125V 0.5 HP Color Catalog Numbers NEMA 5-20R 20A 125V UL Listed 1 HP Tamper resistant with wire leads. Brown HBLS62H HBLS63H Ivory HBLS62HI HBLS63HI ray HBLS62HY HBLS63HY Red HBLS62HR HBLS63HR hite HBLS62H HBLS63H Illuminated face, back and side wired, Ivory HBL8200ILI HBL8300ILI slotted screws. ray HBL8200ILY HBL8300ILY Red HBL8200ILR HBL8300ILR hite HBL8200IL HBL8300IL Notes: Horsepower ratings are AC only. 1.63" (41.4) HBL8200 1.33" (33.8) HBL8200ILI 1.59" (40.4) 2.72" (69.0).97" (24.6) 2.73" (69.3).80" (20.3).95" (24.1) HBLS63H 2.72" (69.0) Straight Blade Devices 15A & 20A, 125V, 2P 3 Hospital rade Receptacles A-9
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts Hospital rade and Special Purpose Hospital rade Duplex Receptacles 1.33" (33.8) 15A only 2.73" (69.3) Circuit uard Heavy Duty, Hospital rade, Special Purpose Duplex Receptacles NEMA 5-15R 15A 125V 0.5 HP Color Catalog Numbers NEMA 5-20R 20A 125V UL Listed 1 HP Isolated ground. (1) Orange I8200 I8300.80" (20.3) I8200 Surge suppression receptacles. (2) Blue HBL8262S HBL8362S Ivory HBL8262IS HBL8362IS ray HBL8262YS HBL8362YS Red HBL8262RS HBL8362RS hite HBL8262S HBL8362S 1.81" (46.0) 1.30" (33.0) Isolated ground and surge Blue I8262S I8362S suppression receptacles. (1) (2) Ivory I8262IS I8362IS ray I8262YS I8362YS hite I8262S I8362S Orange I8262OS I8362OS Red I8262RS I8362RS 2.62" (66.5) round fault circuit interrupters with Brown F8200 F8300 wire leads. (3) Ivory F8200I F8300I ray F8200Y F8300Y Red F8200R F8300R hite F8200 F8300 F8200 1.13" (28.7) Notes: Horsepower ratings are AC only. (1) See Section for complete line of Circuit uard isolated ground devices. (2) See Section for complete line of Circuit uard surge suppression devices. (3) See Section for complete line of Circuit uard ground fault circuit interrupters. FCI receptacles should not be used in critical care patient areas or for electrical life support equipment application because of the possibility of power interruption. A-10
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts Heavy Duty, Specification rade and Hospital rade Single Receptacles 15A only Heavy Duty, Specification rade, Single Receptacles Color Catalog Numbers Flush, nylon face, back and side wired. Brown HBL5261 HBL5361 Ivory HBL5261I HBL5361I ray HBL5361RY Flush, nylon face, back and side wired. Brown HBL5261CN* Ivory HBL5261ICN* Special Purpose Single Receptacles Color Catalog Numbers Corrosion resistant. Yellow HBL52CM61 HBL53CM61 On a 4" (101.6) round cover. Brown HBL5281 Isolated ground. Orange I5261 I5361 Orange I5261CN* Panel mount on 1.94" (49.3) centers. Brown HBL5284 HBL5357 Heavy Duty, Hospital rade, Single Receptacles Color Catalog Numbers Flush, nylon face, back and side wired. (1) Brown HBL8210 HBL8310 Ivory HBL8210I HBL8310I ray HBL8210Y HBL8310Y Red HBL8210R HBL8310R hite HBL8210 HBL8310 Isolated ground. (2) Orange I8210 I8310 Panel mount on 1.94" (49.3) centers. Brown HBL8284 Ivory HBL8284I HBL8384I Notes: *Catalog numbers listed above with suffix CN have combination Robertson/ slotted head terminal and mounting screws. All others have slotted screws. Accepts 20A plug only. Heavy Duty, Specification rade, Single Receptacles Robertson /slotted screws Color Catalog Numbers Flush, nylon face, back and side wired. Brown HBL6331CN Ivory HBL6331ICN Heavy duty hospital grade. Brown HBL8310CN Ivory HBL8310ICN Horsepower ratings listed above are AC only. (1)See Section H for complete line of hospital grade devices. (2)See Section for complete line of Circuit uard isolated ground devices. NEMA 5-15R 15A 125V 0.5 HP 5-20R Canadian 20A 125V 1 HP NEMA 5-20R 20A 125V UL Listed 1 HP 1.13" (28.7).86" (21.8) 1.94" 1.39" (49.3) (35.3).94" (23.9) HBL5261 1.63" (41.4) HBL5284 1.63" (41.4) HBL8210 1.63" (41.4).86" (21.8) HBL8284 1.63" (41.4) HBL6331CN #6-32 Tap 1.39" 1.94" (35.3) (49.3).94" (23.9).94" (23.9) 1.94" (49.3) 1.94" (49.3) Straight Blade Devices 15A & 20A, 125V, 2P 3 Single Receptacles A-11
Straight Blade Receptacles Duplex Receptacles Product Features and Benefits Heavy duty wrap around bridge locked into body. Thick wall thermoset base..032" thick brass triple wipe power contacts. Eight hole clamp type back wiring. Brass center rivet. All brass grounding system. Impact resistant nylon face. Value Engineered Design The Hubbell 5252 Series. Equal to or better than all competitors imitation of Hubbell's 5262. Available in a side wire only version (5242 series). Our concern for quality, safety and innovative design isn t restricted to the top of our product line. Every device in our catalog is built to uncompromising standards, no matter what the catalog number is. You can benefit from the performance features of an industrial receptacle at a fraction of the price of other 5262s. Pretensioned ground contact feature allows for easy insertion and removal of ground blades without sacrificing superior ground blade retention. Compact heavy duty design provides users with a superior device which fits into narrow cut-in or handy boxes. Thick triple wipe brass contacts deliver reliable uninterrupted power supply. Material has superior spring properties. Contact assembly includes large #8 brass screws. Patented anchor hole and wire restraint feature. Anchor hole helps form solid wire around terminal screw. ire restraint feature provides strain relief when pushing receptacle into the wall box (5242/5342 series). A-12
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts Compact, Specification rade Duplex and Single Receptacles 15A only Duplex Receptacles Back and Side ired Color Catalog Numbers Flush, nylon face, back and side wired. Brown HBL5252 HBL5352 Ivory HBL5252I HBL5352I ray HBL5252Y HBL5352Y Red HBL5252R HBL5352R hite HBL5252 HBL5352 Blue HBL5352BL Black HBL5352BK Flush, nylon face, back and side wired Brown HBL5252CN HBL5392CN** with combination Robertson/ slotted Ivory HBL5252ICN HBL5392ICN** terminal and mounting screws. ray HBL5252YCN Red HBL5252RCN hite HBL5252CN On a 4.0" (101.6) round cover. Brown HBL5253 Duplex Receptacles Side ired Only Color Catalog Numbers Flush, nylon face, side wired only. Brown HBL5242 HBL5342 Ivory HBL5242I HBL5342I ray HBL5242Y HBL5342Y hite HBL5242 HBL5342 Single Receptacles Color Catalog Numbers Flush side wired only. Brown HBL5251* Ivory HBL5251I* Isolated ground. (1) Orange I5251 Panel mount 1.75" (44.5) centers. Brown HBL5258 HBL5358 Ivory HBL5258I Notes: Horsepower ratings listed above are AC only. See page A-42 for accessories. (1)See Section for complete line of Circuit uard isolated ground devices. See page A-48 for technical information. *Add CN suffix for Robertson/slotted mounting and terminal screws. All others have slotted screws. **5-20R Canadian 20A, 125V. UL, CSA. NEMA 5-15R 15A 125V 0.5 HP NEMA 5-20R 20A 125V UL Listed 1 HP 1.39" (35.3) 1.75" (44.5) #8-32 Tap 1.33" (33.8) HBL5252 1.33" (33.8) HBL5242 HBL5251 HBL5258.80" (20.3).80" (20.3) 1.13" (28.7) 2.73" (69.3) 2.73" (69.3).92" (23.3) 1.47" (37.3) Straight Blade Devices 15A & 20A, 125V, 2P 3 Compact Receptacles A-13
4-PLEX Receptacles Unique face design accepts up to four straight or molded angle plugs. Heavy duty Lexan housing. Heavy-duty, triple-wipe, brass power and ground contacts. A and B circuit identification molded into face. Removable knockouts for mounting to octagon concrete ring or box. Snub hole for fast, easy terminations. Easily accessible break-off tabs for split circuit wiring. Three conductors energize all four outlets. Large #8 combination Robertson head terminal screws for ease of wiring. Four-in-One Receptacle 4-PLEX is a perfect solution for outlet scarce locations. This receptacle can be mounted on a single or two gang flush outlet box or on a nonmetallic portable box for temporary power applications. If mounted on a 4 square box, this product complies with NEC Article 410-56(i). Available in industrial grade, hospital grade, isolated ground and surge protected versions. Accessories include mounting plates and portable outlet boxes. Lexan is a registered trademark of eneral Electric Co. A-14
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts 4-PLEX Receptacles 15A only 4-PLEX Receptacles with over size Robertson /slotted head terminal screws Color Catalog Numbers Specification grade. Brown HBL415 HBL420 Ivory HBL415I HBL420I ray HBL415Y HBL420Y hite HBL415 HBL420 Black HBL415BK HBL420BK Hospital grade. Brown HBL415H HBL420H Ivory HBL415HI HBL420HI ray HBL415HY HBL420HY hite HBL415H HBL420H Red HBL415HR HBL420HR Isolated ground Orange I415 I420 Surge suppression. Blue HBL415S HBL420S Ivory HBL415IS HBL420IS Surge suppression, hospital grade. Blue HBL420HS Ivory HBL420HIS Color Catalog Number Specification grade. hite 415347C Notes: Horsepower ratings are AC only. See page A-49 for technical information. Accessories NEMA 5-15R 15A 125V 0.5 HP NEMA 24-15R 15A 347V CSA Color Catalog Numbers 4-PLEX adapter plates Brown HBL4AP for 1 and 2 gang, and 4" (101.6) square Ivory HBL4API device boxes. ray HBL4APY hite HBL4AP Black HBL4APBK Blue HBL4APBL Red HBL4APR Orange HBL4APO 4-PLEX portable box. Brown HBL4PB Portable 4" (101.6) square box with Ivory HBL4PBI cord grip. Accepts up to.66" (16.8) Black HBL4PBBK diameter cord. Blue HBL4PBBL NEMA 5-20R 20A 125V UL Listed 1 HP Notes: 4-PLEX box is not UL listed. UL listing does not apply when 4-PLEX receptacle is used with 4-PLEX box in extension cord application. 4.30" sq. (109.2) 4.30" sq. (109.2) 4.30" sq. (109.2) 4.78" (121.4) 4.30" sq. (109.2) 4.05" sq. (102.9).92" (23.4) 3.02" (76.7) 3.38" (85.9) HBL415I.92" (23.4) 3.02" (76.7) 3.38" (85.9) HBL415HI.92" (23.4) 3.02" (76.7) 3.38" (85.9) HBL415S.38" (9.7).19" (4.8) 1.75" (44.5 ) 3.38"sq.(85.9) HBL4API 3.38" sq. (85.9) HBL4PBI.1" (2.5).1" (2.5).1" (2.5) 2.75" (69.9).84" (21.3) 2 Punchouts.66" (16.8) Dia. ire Hole Straight Blade Devices 15A & 20A, 125V, 2P 3 4-PLEX Receptacles A-15
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts STYLE LINE Duplex Receptacles 1.36" (34.5) 15A only HBL2152 1.36" (34.5).80" (20.3) 2.75" (69.9) Style Line, Specification rade, Duplex Receptacles NEMA 5-15R 15A 125V 0.5 HP Color Catalog Numbers NEMA 5-20R 20A 125V UL Listed 1 HP Flush, nylon face, back and side wired. Brown HBL2152 HBL2162 Ivory HBL2152I HBL2162I ray HBL2152Y HBL2162Y hite HBL2152A HBL2162A Black HBL2152BLK HBL2162BLK Office hite HBL2152O HBL2162O Isolated ground. (1) Orange I2152 I2162 Style Line, Hospital rade, Duplex Receptacles (2) HBL2172 1.36" (34.5).80" (20.3) 2.75" (69.9) Color Catalog Numbers Flush, nylon face, back and side wired. Brown HBL2172 HBL2182 Ivory HBL2172I HBL2182I ray HBL2172Y HBL2182Y hite HBL2172A HBL2182A Black HBL2172BLK HBL2182BLK Office hite HBL2172O HBL2182O Red HBL2172R HBL2182R Isolated ground. (1) Orange I2172 I2182 Ivory I2172I I2182I hite I2182A 2.75" (69.9) Notes: (1) See Section for complete line of Circuit uard isolated ground devices. (2)See Section H for complete line of hospital grade devices. See Section D for wallplates. Horsepower ratings listed above are AC only..80" (20.3) Catalog number shown on gray background will be discontinued when stock is exhausted. A-16 I2162
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts Specification rade, Commercial Duplex Receptacles 15A only Commercial Duplex Receptacles Back and Side ired Color Catalog Numbers Smooth nylon face. Brown CBR15* CBR20 Ivory CBR15I* CBR20I ray CBR15RY* CBR20RY hite CBR15HI* CBR20HI Black CBR15BLK CBR20BLK Commercial Duplex Receptacles Side ired Only Color Catalog Numbers Smooth nylon face. Brown CR15* CR20 Ivory CR15I* CR20I ray CR15RY* CR20RY hite CR15HI* CR20HI Black CR15BLK CR20BLK Commercial Duplex Receptacles Side ired, Open Terminals Color Catalog Numbers Smooth nylon face. Brown CRO15 CRO20 Ivory CRO15I CRO20I ray CRO15RY CRO20RY hite CRO15HI CRO20HI Black CRO15BLK CRO20BLK Notes: See page A-42 for accessories. Horsepower ratings listed above are AC only. *Add CN suffix for Robertson/slotted mounting and terminal screws. All others have slotted screws. Catalog numbers shown on gray background will be discontinued when stock is exhausted. NEMA 5-15R 15A 125V 0.5 HP NEMA 5-20R 20A 125V UL Listed 1 HP 1.41" (35.8) CBR15 1.41" (35.8) CR15 1.41" (35.8) 2.73" (69.3).83" (21.1) 2.73" (69.3).83" (21.1) 2.73" (69.3).83" (21.1) Straight Blade Devices 15A & 20A, 125V, 2P 3 Commercial Receptacles CRO15 A-17
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts Specification rade, Commercial Duplex Receptacles 1.41" (35.8) 15A only CBRF15 1.41" (35.8) CRF15 2.73" (69.3).83" (21.1) 2.73" (69.3).83" (21.1) Commercial Duplex Receptacles Back and Side ired Color Catalog Numbers Finder groove nylon face. Brown CBRF15* CBRF20 Ivory CBRF15I* CBRF20I ray CBRF15RY* CBRF20RY hite CBRF15HI* CBRF20HI Black CBRF15BLK CBRF20BLK Commercial Duplex Receptacles Side ired Only NEMA 5-15R 15A 125V 0.5 HP Color Catalog Numbers NEMA 5-20R 20A 125V UL Listed 1 HP Finder groove nylon face. Brown CRF15* CRF20 Ivory CRF15I* CRF20I ray CRF15RY* CRF20RY hite CRF15HI* CRF20HI Black CRF15BLK CRF20BLK Notes: See page A-42 for accessories. Horsepower ratings listed above are AC only. *Add CN suffix for Robertson/slotted mounting and terminal screws. All others have slotted screws. Catalog numbers shown on gray background and CRF15RYCN and CRF15ICN will be discontinued when stock is exhausted. A-18
INSULRIP Plugs and Connectors INSULRIP Plugs and Connectors
INSULRIP 15 & 20 Ampere Plugs and Connectors Featuring Integral VARI-SIZE Cord rip Individually molded face for each blade configuration keeps debris out of plug interior. Roomy wiring chamber provides ample space for wiring. Individual wiring terminals completely enclosed in their own separate chambers. Powerful, offsetting cord grips clamp on individual conductors and outer cord jacket to prevent strain on terminals. Ribbed nylon housing is impact and chemical resistant. Bevelled housing prevents snagging when dragged across uneven surfaces. Integral VARI-SIZE insert adjusts to a wide range of cord sizes:.230-.720 (5.8-18.3). Combination Phillips/slotted* head screws provide screwdriver versatility. Pocketed recess for cord grip screws deter slippage of the screwdriver. VARI-SIZE pointer set to smaller than gauge position. Cord diameter range is.230 -.360 (5.8-9.0). Accepts slotted and Phillips head drivers. Transparent angled wiring entrance holes permit straight in conductor insertion. Catalog number is visible on the device while in use for easy identification. Powerful offsetting cord grips clamp on individual conductors and outer cord jacket to prevent strain on terminations. *Combination Robertson/slotted screws available on certain configurations and are indicated with CN suffixes in the catalog. A-20
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts INSULRIP Heavy Duty Plugs IP20 SUITABILITY Insulgrip Plugs Phillips/ Slotted Screws Cord Dia. Catalog Numbers Black and white nylon..230-.720" HBL5266C HBL5366C (5.8-18.3) Corrosion resistant yellow nylon..230-.720" HBL52CM66C HBL53CM66C (5.8-18.3) 8-position angle plug, black.325-.655" HBL5266CA HBL5366CA and white nylon. (8.3-16.6) 8-position angle plug,.325-.655" HBL5266CAT transparent enclosure. (8.3-16.6) Anchor lock, black and.230-.720" HBL5280C white nylon. (5.8-18.3) Anchor lock, corrosion resistant.230-.720" HBL52CM80C yellow nylon. (5.8-18.3) Finger grip, black neoprene,.312-.468" HBL5921 slotted screws. (7.9-11.9) Fusible, black vinyl housing,.296-.625 HBL5299 slotted screws. (7.5-15.9) Insulgrip Plugs Robertson /Slotted Screws Cord Dia. Catalog Numbers Black and white nylon..230-.720" HBL5266CCN HBL5366CCN (5.8-18.3) Yellow and white nylon..230-.720" HBL5266CYCN (5.8-18.3) 8-position angle plug,.325-.655" HBL5266CACN black and white nylon. (8.3-16.6) 8-position angle plug,.325-.655" HBL5266CATCN transparent enclosure. (8.3-16.6) Insulgrip, Hospital rade Plugs Phillips/ Slotted Screws Cord Dia. Catalog Numbers Black and white nylon..230-.720" HBL8215C HBL8315C (5.8-18.3) Transparent housing..230-.720" HBL8215CT HBL8315CT (5.8-18.3) 8-position angle plug,.250-.655" HBL8215CAT HBL8315CAT transparent enclosure. (6.4-16.6) Insulgrip, Hospital rade Plugs Robertson / Slotted Screws Cord Dia. Catalog Numbers Black and white nylon..230-.720" HBL8215CCN (5.8-18.3) Transparent housing..230-.720" HBL8215CTCN (5.8-18.3) 8-position angle plug,.250-.655" HBL8215CATCN transparent enclosure. (6.4-16.6) Notes: Horsepower ratings listed above are AC only. * UL component listed only. Accessories Seal-Tite triple seal black elastomer cover for Insulgrip plugs when used in a cord set, and connectors when used with flanged inlets. Same as above except yellow elastomer. PLUOUT Lockout device for Hubbell plugs and others. HBL6017* HBL60CM17* HLD Notes: See page A-43 for accessories. See page A-46 for technical information. NEMA 5-15P 15A 125V 0.5 HP NEMA 5-20P 20A 125V 1 HP Discontinued when stock is exhausted 1.97" (50.0) HBL5266C 1.22" (30.9) 1.53" (38.9) HBL5266CA 1.97" (50.0) HBL5280C 1.97" (50.0) HBL8215C 1.22" (30.9) 1.53" (38.9) HBL8215CAT 1.53" (38.9) 2.11" (53.6) 1.53" (38.9) 2.11" (53.6) 1.53" (38.9) Straight Blade Devices 15A & 20A, 125V, 2P 3 Plugs A-21
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts INSULRIP Connector Bodies 15A only IP20 SUITABILITY 2.78" (70.6) Insulgrip Connector Bodies Phillips/ Slotted Screws NEMA 5-15R 15A 125V NEMA 5-20R 20A 125V UL Listed 1.53" (38.9) HBL5269C 1.40" (35.6) Cord Dia. Catalog Numbers Black and white nylon..230-.720" HBL5269C HBL5369C (5.8-18.3) Black and white nylon..230-.720" HBL5269CCN * (5.8-18.3) Corrosion resistant yellow nylon..230-.720" 52CM69C 53CM69C (5.8-18.3) Steel armored, brown phenolic,.296-.625" 5269 slotted screws. (7.5-15.9) 2.78" (70.6) Insulgrip Hospital rade, Connector Bodies Phillips/ Slotted Screws 1.53" (38.9) HBL8219C 1.40" (35.6) Cord Dia. Catalog Numbers Black and white nylon..230-.720" HBL8219C HBL8319C (5.8-18.3) Black and white nylon..230-.720" HBL8219CCN * (5.8-18.3) Transparent enclosure..230-.720" HBL8219CT HBL8319CT (5.8-18.3) Transparent enclosure..230-.720" HBL8219CTCN* (5.8-18.3) *Note:Catalog numbers listed above with suffix CN have combination Robertson/ slotted head terminal and assembly screws. Accepts 20A plug only. IP20 SUITABILITY 2.78" (70.6) Insulgrip Connector Bodies Robertson/ Slotted Screws 5-20R Canadian 20A 125V 1.53" (38.9) HBL6334CCN 1.40" (35.6) Cord Dia. Catalog Numbers Heavy duty,.230-.720" HBL6334CCN black and white nylon. (5.8-18.3) Hospital grade,.230-.720" HBL8319CCN black and white nylon. (5.8-18.3) Notes: Connector bodies are not HP rated. See Section H for complete line of hospital grade devices. See page A-46 for technical information. See accessories at back of this section. Accessories Seal-Tite triple seal black elastomer cover for Insulgrip connector bodies when used in a cord set. Same as above except yellow elastomer. Closure plug, black. Closure plug, yellow. PLUOUT Lockout device for Hubbell connectors and others HBL6018* HBL60CM18* HBL6019 HBL60CM19 HLD Notes: *IP55 suitability if closure plug inserted or when installed and used properly with HBL6017 or HBL60CM17. A-22
ELASTORIP High Visibility Yellow Plugs and Connectors Product Features and Benefits atertight Plug U-Drive fast lead body assembly screws. Neoprene bushing keeps water and dust out. Color coded Kellems OTCHA rings provide increased cord retention. Thermoplastic elastomer housing. Resists weathering caused by ultraviolet rays and ozone better than rubber. Also oil and chemical resistant. Three separate transparent wiring chambers allow for visual inspection. atertight Connector Body Closure plug seals connector body when disconnected from plug. Integral weatherproofing shroud seals connection between plug and connector. Pretensioned bypass design female contacts for abuse resistance and reliability. Nylon compression nut keeps water and dust from getting into the body around the cord. Dust Tight Plug Thermoplastic elastomer housing. Powerful nylon cord grip prevents strain on terminals. Dust and moisture seal keeps out liquids, metal filings and other foreign materials. U Drive fast lead body assembly screws. ELASTORIP Plugs and Connectors Features and Benefits A-23
Straight Blade Devices 2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts ELASTORIP Plugs and Connector Bodies 2.19" (55.6) 15A only IP20 and IP55 SUITABILITY HBL1447 2.63" (66.8) 1.56" (39.6) 1.56" (39.6) Elastogrip Plugs NEMA 5-15P 15A 125V 0.5 HP NEMA 5-20P 20A 125V 1 HP Cord Dia. Catalog Numbers Yellow elastomer,.300-.655" HBL1447 HBL1433 dust tight (7.6-16.6) Yellow elastomer,.300-.655" HBL1447* HBL1433* watertight. (7.6-16.6) Note: Horsepower ratings listed are AC only. *atertight plugs IP55 suitability when installed and used properly with watertight connector bodies. HBL1447 3.00" (76.2) 1.61" (40.9) Elastogrip Connector Bodies NEMA 5-15R 15A 125V NEMA 5-20R 20A 125V UL Listed 1.61" (40.9) HBL1547 4.00" (101.6) Cord Dia. Catalog Numbers Yellow elastomer,.300-.655" HBL1547 HBL1533 dust tight. (7.6-16.6) Yellow elastomer,.300-.655" HBL1547* HBL1533* watertight. (7.6-16.6) Notes: Connector bodies are not HP rated. *atertight connectors IP55 suitability when closure plug inserted or when installed and used properly with watertight plug. HBL1547 A-24
VALISE Plugs and Connectors Two captive assembly screws. Totally insulated impact and crush resistant nylon body. Nylon webs are provided to make wiring quick and easy by joining the three sections together during assembly. Unique patented clamp type terminals provide a superior electrical connection by bundling the conductor strands when clamps are tightened. 8 specially designed load bearing locking lugs insure a positive fit as the blade holder and sides are closed. Powerful cord grips prevent conductor slippage and strain on wiring terminals. Removable cord inserts. Device accommodates a wide range of cord sizes.220-.660" (5.6-16.8). VALISE Plugs and Connectors Features and Benefits A-25
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts VALISE Plugs and Connector Bodies 1.88" (47.8) 1.25" (31.8) 1.13" (28.7) Valise Plugs IP20 SUITABILITY NEMA 5-15P 15A 125V 0.5 HP NEMA 5-20P 20A 125V 1 HP HBL5965VY 1.88" (47.8) HBL8115V 1.25" (31.8) 1.13" (28.7) Cord Dia. Catalog Numbers Yellow nylon..220-.660" HBL5965VY HBL5364VY (5.6-16.8) Yellow nylon..220-.660" HBL5965VYCN* HBL5364VYCN* (5.6-16.8) ray nylon..220-.660" HBL5965VY (5.6-16.8) Black nylon..220-.660" HBL5965VBLK (5.6-16.8) Black nylon..220-.660" HBL5965VBLKCN* (5.6-16.8) Insulation displacement.230-.360" HBL5966VBLK terminals, black nylon. (5.8-9.1) Hospital rade, Valise Plugs Cord Dia. Catalog Numbers 1.17" (29.7) 1.60" (40.6) HBL5966VBLK 1.24" (31.5) hite nylon..300-.660" HBL8115V HBL8364V (7.6-16.8) hite nylon..300-.660" HBL8115VCN* (7.6-16.8) Insulation displacement,.230-.360" HBL8013V white nylon. (5.8-9.1) Note: See Section H for complete line of hospital devices. 2.63" (66.8) 15A only IP20 SUITABILITY HBL5969VY 2.63" (66.8) HBL8119V 1.25" (31.8) 1.13" (28.7) 1.25" (31.8) 1.13" (28.7) Valise Connector Bodies Cord Dia. Catalog Numbers Yellow nylon.220-.660" HBL5969VY HBL5369VY (5.6-16.8) Yellow nylon.220-.660" HBL5969VYCN* (5.6-16.8) ray nylon.220-.660" HBL5969VY (5.6-16.8) Black nylon.220-.660" HBL5969VBLK (5.6-16.8) Black nylon.220-.660" HBL5969VBLKCN* (5.6-16.8) Valise, Hospital rade, Connector Body NEMA 5-15R 15A 125V Cord Dia. Catalog Numbers NEMA 5-20R 20A 125V UL Listed hite nylon.300-.660" HBL8119V (7.6-18.3) Notes: *Catalog numbers listed above with suffix CN have combination Robertson/slotted head terminal and assembly screws. All others have slotted screws. Connector bodies are not HP rated. A-26
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts INSULRIP Flanged Inlets and Flanged Receptacles Flanged Inlets Phillips/ Slotted Screws NEMA 5-15P 15A 125V Catalog Numbers NEMA 5-20P 20A 125V Nylon casing, back wired. HBL5278C HBL5378C Same as above, except with combination HBL5278CCN Robertson/slotted head screws. eather proof, gray nylon, with lift cover and boot, HBL61CM64 slotted screws. Nickel plated brass flange, phenolic body, miniature HBL5240* style, for molded on connectors only, slotted screws. * Specially designed to accept molded-on connector bodies. Cat. 5240 will not accept standard size connector bodies listed in this catalog, or molded connectors having a rejection obstruction as required by Underwriters Laboratories Inc. standard #817 cord sets and power supply cords effective 7/1/81. 15A only Flanged Receptacles Phillips/ Slotted Screws Catalog Numbers Nylon casing, back wired. HBL5279C HBL5379C Nickel plated brass flange, phenolic body, HBL5279 covered terminals, slotted screws. Nickel plated brass flange, brown phenolic, HBL5256 slotted screws. (Mounting screws packed separately.) eather proof, gray nylon, with lift cover and boot, HBL61CM65 slotted screws. See page A-43 for accessories. NEMA 5-15R 15A 125V Discontinued when stock is exhausted NEMA 5-20R 20A 125V UL Listed 1.88" (47.8) 2.19" (55.6).39"(9.9) Dia..16" (4.1) Dia. 2.72" (69.1) 2.19" (55.6).16" (4.1) Dia. 2.06" (52.3).39"(9.9) Dia. 1.88" (47.8) 2.66" (67.6) 2.56" (65.0) 1.72" (43.7) HBL5278C 2.72" (69.1) 1.56" (39.6) HBL61CM64 2.56" (65.0) 1.72" (43.7) HBL5279C HBL5256 2.25" (57.2) 1.56" (39.6).20" Dia. (5.1) HBL61CM65 1.72" (43.7) 2.88" (73.2).19" (4.8) Dia. 4 Holes 1.72" (43.7) 1.09" (27.7) 1.47" (37.3) 2.88" (73.2).19" (4.8) Dia. 4 Holes Straight Blade Devices 15A & 20A, 125V, 2P 3 Flanged Devices A-27
2 Pole, 3 ire rounding 15 and 20 Ampere Miscellaneous and Combination Receptacles HBL5236 Miscellaneous Receptacles Receptacle, Display Type, Brown Phenolic, with.060 brass plate and blank flush plug. Receptacle, Clock Hanger Brown with.040 brass plate. Brown with stainless steel plate. Four Outlet Cluster, Brown Phenolic, steel cover, swivel hook. Cord grip range.296-.562" (7.5-14.3) (cord not supplied). NEMA 5-15R 15A 125V 0.5 HP Catalog Numbers HBL5236 HBL5233 HBL5235 HBL9259* * Not listed by Underwriters Laboratories Inc. 3.00" (76.2) 2.00" (50.8) HBL5233 3.69" (93.7) HBL9259 1.50" (38.1) Special Combination Duplex Receptacles Catalog Numbers 15A 125V Brown phenolic, 1 feed, 1 return, back/side wired. HBL4792 Brown phenolic, 2 feeds, 1 return, side wired. HBL4794 15A 125V Brown phenolic, 2 feeds, 2 returns, side wired. HBL4795 15A 250V Brown nylon face, 2 circuit, back and side wired. HBL5292 Same as above except ivory. HBL5292I 15A 125V 20A 250V Brown nylon face, 2 circuit, back and side wired. HBL5492 Same as above except ivory. HBL5492I 2.75" (69.9) 20A 125V 15A 125V Brown phenolic, 2 feeds, 1 return, common ground. HBL7371 10A 250V 15A 125V Brown phenolic, 2 feeds, 2 returns, common ground. HBL 7372 Note: These devices not listed by Underwriters Lab. 20A 125V Brown phenolic, side and backwired. HBL5392 HBL5292.88" (22.4) 20A 125V Orange urea, isolated ground. I5392CN* Note: These devices will only accept 20A grounding plugs, UL and C.S.A. listed. *Robertson/slotted mounting and terminal screws. All others have slotted screws. Note: See Section for complete line of Circuit uard isolated ground devices. A-28
2 Pole, 3 ire rounding 15 and 20 Ampere, 250 Volts Heavy Duty, Specification rade Receptacles 15A only Heavy Duty, Specification rade, Duplex Receptacles Color Catalog Numbers Flush, nylon face, back & side wired. Brown HBL5662 HBL5462 Ivory HBL5662I HBL5462I ray HBL5462Y Flush, nylon face, back & side wired, Brown HBL5662CN HBL6392CN* Robertson/slotted screws. Ivory HBL5662ICN Isolated round. Orange I5662 I5462 *Cat. No. 6392CN is UL/CSA listed and has a 20A 250V configuration only. Heavy Duty, Hospital rade, Duplex Receptacles Color Catalog Numbers Flush, thermoplastic polyester face. Brown HBL8600 HBL8400 Ivory HBL8600I HBL8400I Heavy Duty, Specification rade, Single Receptacles Color Catalog Numbers Flush, nylon face, back & side wired. Brown HBL5661* HBL5461 Ivory HBL5661I* HBL5461I Isolated round. Orange I5661 I5461 Panel mount 1.94" (49.3) centers. Brown HBL5684 Flush, nylon face, back & side wired, Brown HBL6391CN** Robertson/slotted screws. Ivory HBL6391ICN** *Add CN suffix for Robertson/slotted mounting and terminal screws. All others have slotted screws. **Products are UL/CSA listed and have 20A, 250V configuration only. Compact, Specification rade, Duplex and Panel Mount Single Receptacles Color Catalog Numbers Flush, nylon face, side wired only, Brown HBL5652 Ivory HBL5652I Panel mount 1.75" (44.5) centers. Brown HBL5658 Notes: HP ratings are AC only. See page A-42 for accessories. See Section for full line of Circuit uard isolated ground devices. NEMA 6-15R 15A 250V 1.5 HP NEMA 6-20R 20A 250V UL 2 HP 1.94" (49.3) 1.94" (49.3) 1.75" (44.5) #8-32 Tap 1.63" (41.4) HBL5662 1.63" (41.4) HBL5462 1.63" (41.4) HBL5661 1.63" (41.4) 1.19" (30.2) 2.72" (69.1).97" (24.6).97" (24.6).875" (22.2) HBL5684 1.13" (28.7) HBL5658 1.47" (35.3) 2.72" (69.1) Straight Blade Devices 15A & 20A, 250V, 2P 3 Heavy Duty Receptacles A-29
2 Pole, 3 ire rounding 15 and 20 Ampere, 250 Volts Plugs and Flanged Inlets 1.97" (50.0) IP20 SUITABILITY 2.11" (53.6) HBL5666C 1.22" (30.9) 1.53" (38.9) HBL5666CA 1.88" (47.8) HBL5666VY 1.53" (38.9) 1.5" (38.1) 1.13" (28.7) 15 and 20A Plugs Phillips/ Slotted Screws NEMA 6-15P 15A 250V 1.5 HP Cord Dia. Catalog Numbers NEMA 6-20P 20A 250V 2 HP Insulgrip plug, black and.230-.720" HBL5666C HBL5466C white nylon. (5.8-18.3) Insulgrip plug, black and white.230-.720" HBL5666CCN HBL5466CCN nylon, Robertson/slotted screws. (5.8-18.3) Insulgrip plug, corrosion resistant,.230-.720" HBL56CM66C HBL54CM66C yellow nylon. (5.8-18.3) 8-Position Insulgrip angle plug,.325-.655" HBL5666CA HBL5466CA black and white nylon. (8.3-16.6) Valise plug, yellow nylon,.220-.660" HBL5666VY HBL5464VY slotted screws. (5.6-16.8) Valise plug, yellow nylon,.220-.660" HBL5666VYCN HBL5464VYCN Robertson/slotted screws. (5.6-16.8) Valise, Hospital rade Plugs Cord Dia. Catalog Numbers Valise plug, white nylon,.300-.660" HBL8666V HBL8464V slotted screws. (7.6-16.8) Note: HP rating listed above are based on 208 to 240V AC only. 2.56" (65.0) Insulgrip Flanged Inlets Phillips/ Slotted Screws 2.19" (55.6) Catalog Numbers Nylon casing. HBL5678C HBL5478C.16" (4.1) Dia. 1.72" (43.7) Note: Flanged inlets are not HP rated. See page A-43 for accessories. 1.72" (43.7) HBL5678C A-30
2 Pole, 3 ire rounding 15 and 20 Ampere, 250 Volts Connectors and Flanged Receptacles 15A only Connector Bodies Cord Dia. Catalog Numbers Insulgrip connector,.230-.720" HBL5669C HBL5469C black and white nylon, (5.8-18.3) Phillips/slotted screws. Valise connector, yellow nylon,.220-.660" HBL5669VY HBL5469VY slotted screws. (5.6-16.8) 15A only NEMA 6-15R 15A 250V NEMA 6-20R 20A 250V UL Listed Flanged Receptacles Catalog Numbers Nylon casing, HBL5679C HBL5479C Phillips/slotted screws. Nickel plated brass flange, brown phenolic HBL5656 housing, slotted screws. (Mounting screws packed separately.) NEMA 6-20R Canadian accepts 20A plug only. Connector Bodies with Robertson/Slotted Screws NEMA 6-15R 15A 250V Cord Dia. Catalog Numbers NEMA 6-20R 20A 250V UL Listed Insulgrip connector, black and.230-.720" HBL5669CCN HBL6394CCN white nylon. (5.8-18.3) Valise connector, yellow nylon.220-.660" HBL5669VYCN (5.6-16.8) Note: See page A-43 for accessories. IP20 SUITABILITY IP20 SUITABILITY NEMA 6-15R 15A 250V NEMA 6-20R Canadian 20A 250V.88" (22.4) 1.53" (38.9) 2.19" (55.63) 1.53" (38.9).16" (4.1) Dia. 2.06" (52.3) 2.78" (70.6) HBL5669C 2.38" (60.5) HBL5669VY 2.56" (65.0) 1.72" (43.7) HBL5679C HBL5656 2.78" (70.6).20" Dia. (5.1) HBL6394CCN 1.09" (27.7) 1.72" (43.7) 1.41" (35.8) 1.47" (37.3) 1.41" (35.8) 1.25" (31.8) Straight Blade Devices 15A & 20A, 250V, 2P 3 Female Devices A-31
2 Pole, 3 ire 15 Ampere, 277V AC Receptacle, Connector Body and Plug 2.63" (66.8) Duplex Receptacle Catalog Numbers Flush, brown, back & side wired. HBL5302 Notes: Horsepower ratings are AC only. NEMA 7-15R 15A 277V AC 2HP NEMA 7-15P 15A 277V AC 2HP 1.53" (38.9) 1.33" (33.8) HBL5302 1.58" (40.1) 5324 1.19" (30.2) 1.44" (36.6) Connector Body Cord Dia. Catalog Numbers Steel armored, brown..296-.625" 5324* (7.5-15.9) Notes: *Catalog number 5324 is not horsepower rated. Horsepower ratings are AC only. Discontinued when stock is exhausted 1.50" (38.1) HBL5929 1.63" (41.4) Plug Cord Dia. Catalog Numbers Finger grip,.312-.468" HBL5929 black elastomer. (7.9-11.9) Note: Horsepower ratings are AC only. A-32
2 Pole, 3 ire rounding 30 and 50 Ampere, 125, 250 Volt and 277 VAC Single Receptacles and Plugs 2 Pole, 3 ire rounding Receptacles and Plugs Rating Configuration Cord Dia. Catalog No. 30A 125V Receptacle, HBL9308 black phenolic. 30A 125V Receptacle, I9308 NEMA 5-30R NEMA 5-30P orange, isolated ground. 30A 125V 2 HP 2 HP Plug, nylon, angle.625-1.187" HBL9309 4 position. (15.9-30.2) 30A 125V Plug, nylon, angle.625-1.187" HBL9309CN* 4 position. (15.9-30.2) 30A 250V Receptacle, HBL9330 black phenolic. 30A 250V Receptacle, I9330 NEMA 6-30R NEMA 6-30P Orange, isolated ground. 30A 250V 2 HP 2 HP Plug, nylon,.625-1.187" HBL9331 angle 4 position. (15.9-30.2) 30A 250V Receptacle, HBL9330CN* black phenolic. 30A 250V Plug, nylon,.625-1.187" HBL9331CN* angle 4 position. (15.9-30.2) NEMA 6-30R 2 HP 30A 277VAC Receptacle, HBL9315 black phenolic 30A 277VAC Plug, nylon,.625-1.187" HBL9319 angle 4 position. (15.9-30.2) NEMA 7-30R 3 HP 50A 125V Receptacle, HBL9360 black phenolic. 50A 125V Receptacle, I9360 NEMA 5-50R NEMA 5-50P orange, isolated ground. 50A 125V 2 HP 2 HP Plug, nylon,.625-1.187" HBL9361 angle 4 position. (15.9-30.2) 50A 250V Receptacle, HBL9367 black phenolic. 50A 250V Receptacle, I9367 NEMA 6-50R NEMA 6-50P orange, isolated ground. 50A 250V 3 HP 3 HP Plug, nylon,.625-1.187" HBL9368 angle 4 position. (15.9-30.2) 50A 250V Receptacle, HBL9367CN* black phenolic. 50A 250V Plug, nylon,.625-1.187" HBL9368CN* angle 4 position. (15.9-30.2) NEMA 6-50R 3 HP 50A 277V AC Receptacle, HBL9365 black phenolic. 50A 277V AC Plug, nylon,.625-1.187" HBL9379 angle 4 position. (15.9-30.2) NEMA 7-50R 5 HP IP20 SUITABILITY NEMA 6-30P 2 HP NEMA 7-30P 3 HP NEMA 6-50P 3 HP NEMA 7-50P 5 HP Notes: All HP ratings listed above are AC only. HP ratings for 125V devices are based on 120VAC and 250V rated devices are based on 208 to 240VAC. *Devices listed above with suffix CN have Robertson/slotted mounting screws. All others have slotted mounting screws. See Section for full line of Circuit uard isolated ground devices. See pages A-44 and A-45 for accessories. 2.10" (53.3) 4.33" (110.0) 2.10" (53.3) 1.77" (45.0) HBL9330 2.75" (69.9) HBL9331 1.77" (45.0) I9330 2.13" (54.1) 2.00" (50.8) 1.88" (47.8) 2.13" (54.1) 2.00" (50.8) Catalog numbers shown on gray background will be discontinued when stock is exhausted. Straight Blade Devices 30A & 50A, 2P 3 A-33
3 Pole, 3 ire Non-rounding 20 Ampere, 125/250 Volts AC or DC Single Receptacles and Plugs 1.39" (35.3) IP20 SUITABILITY 3 Pole, 3 ire Non-rounding Receptacles and Plugs Rating Configuration Cord Dia. Catalog No. 20A 125/250V Receptacle, HBL6810 Y X black phenolic. X Y 20A 125/250V NEMA 10-20R NEMA 10-20P Plug, Insulgrip,.385-.780" HBL9977C UL Listed UL Listed 2(1) HP 2(1) HP nylon. (9.8-19.8) HBL6810 2.50" (63.5).97" (24.6) All horsepower ratings listed above are AC only. Horsepower rating not in parentheses are phase to phase, (208 to 240V AC). Those in parentheses are phase to neutral, (120V AC). 1.94" (49.2) HBL9977C Flush Cover Plates For 6810 Receptacles Nylon, black, smooth, single gang. Stainless steel, 302/304 smooth, single gang. Brass,.04" (1.0), smooth, single gang. Refer to Section D for more details on cover plates. Catalog No. P7B S7 B7 S7 A-34
3 Pole, 3 ire Non-rounding 30 and 50 Ampere, 125/250 Volts AC or DC Single Receptacles and Plugs 3 Pole, 3 ire Non-rounding Receptacles and Plugs Rating Configuration Cord Dia. Catalog No. 30A 125/250V Receptacle, HBL9350 Y X black phenolic. 30A 125/250V X Y Receptacle, HBL9395 NEMA 10-30R NEMA 10-30P surface mount UL Listed UL Listed 2(2) HP 2(2) HP aluminum housing. 30A 125/250V Plug, Insulgrip,.625-1.00" HBL9337C nylon. (15.9-25.4) 30A 125/250V Plug, nylon,.625-1.187" HBL9333 angle, 4 position. (15.9-30.2) 50A 125/250V Receptacle, HBL7962 Y X black phenolic. 50A 125/250V X Y Receptacle, HBL7940 NEMA 10-50R NEMA 10-50P surface mount, UL Listed UL Listed 3(2) HP 3(2) HP aluminum housing. 50A 125/250V Plug, Insulgrip,.625-1.218" HBL7513C nylon. (15.9-30.9) 50A 125/250V Plug, nylon,.625-1.187" HBL7977* angle, 4 position. (15.9-30.2) 50A 125/250V Connector body,.625-1.218" HBL7515C Insulgrip, nylon. (15.9-30.9) All horsepower ratings listed above are AC only. Horsepower ratings not in parentheses are phase to phase, (208 to 240V AC). Those in parentheses are phase to neutral, (120V AC). *Add CN suffix for Robertson/slotted screws. HBL7977CN will be discontinued when stock is exhausted. Flush Cover Plates For 9350-7962 Receptacles IP20 SUITABILITY Nylon, black, smooth, 2 gang. Stainless steel 302/304 smooth. Cast aluminum, with lift cover, weatherproof. IP44 SUITABILITY Cast aluminum, without lift cover. Catalog No. P703B S723 HBL9420 HBL9419 2.50" (63.5) (53.1) 2.09" 2.13" (54.1) 5.06" (128.5) 2.88" (73.2) 2.88" (73.2) 4.33" (110.0) HBL9350 2.50" (63.5) HBL9395 2.75" (69.9) HBL9333 4.13" (104.9) HBL7513C 5.75" (146.1) HBL7515C 1.69" (42.9) 2.06" (52.3) 1.88" (47.8) Straight Blade Devices 30A & 50A, 125/250V, 3P 3 A-35
3 Pole, 4 ire rounding 20 Ampere, 125/250 Volts and 3Ø 250 Volts Receptacles and Plugs 2.38" (60.5) 1.39" (35.3) IP20 SUITABILITY 3 Pole, 4 ire rounding Receptacles and Plugs Rating Configuration Cord Dia. Catalog No. 20A 125/250V Receptacle, HBL8410 Y X X Y black phenolic, back & side wired. 20A 125/250V NEMA 14-20R NEMA 14-20P Plug, nylon,.390-.775" HBL8411C 2(1) HP 2(1) HP angle 4 Position. (9.9-19.7) 3.64" (92.5) HBL8410 2.34" (59.4) 1.19" (30.2) 1.61" (40.9) 20A 3Ø 250V Receptacle, HBL8420 Z Z X X black phenolic, Y Y back & side wired. 20A 3Ø 250V NEMA 15-20R NEMA 15-20P Plug, nylon,.390-.775" HBL8421C 3 HP 3 HP angle 4 Position. (9.9-19.7) Notes: Horsepower ratings listed above are AC only. Horsepower ratings not in parentheses are phase to phase, (208 to 240V AC). Horsepower ratings in parentheses are phase to neutral, (120V AC). HBL8411C A-36
Heavy Duty INSULRIP 30, 50, 60 Amp Plugs and Receptacles Heavy duty cable grips handle a wide range of cable sizes to prevent conductor movement that can cause strain on the terminals. Neoprene dust shields fit a variety of cable diameters to provide a reliable seal to keep dust out. Supertough nylon housing provides high impact resistance. ripping ribs provide secure gripping area. Reinforced thermoplastic polyester provides high impact and heat resistance. Captive Allen head terminal screws user-ready. Catalog number, NEMA number, ratings and certifications molded in face. Plated steel mounting plate provides corrosion resistance. Unit mounts in a 2 gang box. One piece design power and ground contacts provide low operating temperatures. Sequenced contacts assure protection for people and equipment. Catalog number, NEMA number, ratings and certifications molded in face. Floating V bottom contact lugs bundle strands to provide high contact pressure and low operating temperatures. Captive Allen head terminal screws permit high clamping pressure and torque required for larger size conductors. User-ready. SUPERTOUH is a registered trademark of DUPONT. Heavy Duty Devices Features and Benefits A-37
3 Pole, 4 ire rounding 30, 50 and 60 Ampere, 125/250 Volts and 3Ø 250 Volts Receptacles and INSULRIP Plugs 2.88" (73.2) #6-32 UNC-2B 4.5" (114.3) 1.81" (46.0) HBL9430A 4.13" (104.9) HBL9431C 3.38" (85.8) HBL9432C 2.37" (60.3) 2.37" (60.2) IP20 SUITABILITY 3 Pole, 4 ire, rounding Receptacles and Plugs Rating Configuration Cord Dia. Catalog No. 30A 125/250V Receptacle, HBL9430A Y X X Y black RTP. 30A 125/250V Plug, nylon..625-1.310" HBL9431C NEMA 14-30R NEMA 14-30P (15.9-33.3) 30A 125/250V 2(2) HP 2(2) HP Plug, nylon,.625-1.310" HBL9432C angle 4-position. (15.9-33.3) 50A 125/250V Receptacle, HBL9450A Y X X Y black RTP. 50A 125/250V Plug, nylon..625-1.310" HBL9451C NEMA 14-50R NEMA 14-50P (15.9-33.3) 50A 125/250V 3(2) HP 3(2) HP Plug, nylon,.625-1.310" HBL9452C angle 4-position. (15.9-33.3) 60A 125/250V Receptacle, HBL9460A Z X X Z black RTP. 60A 125/250V Plug, nylon..625-1.310" HBL9461C NEMA 14-60R NEMA 14-60P (15.9-33.3) 60A 125/250V 3(2) HP 3(2) HP Plug, nylon,.625-1.310" HBL9462C angle 4-position. (15.9-33.3) 30A 3Ø 250V Receptacle, HBL8430A black RTP. Z X X Z 30A 3Ø 250V Y Y Plug, nylon..625-1.310" HBL8431C NEMA 15-30R NEMA 15-30P (15.9-33.3) 30A 3Ø 250V 3 HP 3 HP Plug, nylon,.625-1.310" HBL8432C angle 4-position. (15.9-33.3) 50A 3Ø 250V Receptacle, HBL8450A black RTP. Z X Z 50A 3Ø 250V X Y Y Plug, nylon..625-1.310" HBL8451C NEMA 15-50R NEMA 15-50P (15.9-33.3) 50A 3Ø 250V 7.5 HP 7.5 HP Plug, nylon,.625-1.310" HBL8452C angle 4-position. (15.9-33.3) 60A 3Ø 250V Receptacle, HBL8460A black RTP. X X Z 60A 3Ø 250V Z Y Y Plug, nylon..625-1.310" HBL8461C NEMA 15-60R NEMA 15-60P (15.9-33.3) 60A 3Ø 250V 10 HP 10 HP Plug, nylon,.625-1.310" HBL8462C angle 4-position. (15.9-33.3) Notes: RTP is an abbreviation for reinforced thermoplastic polyester. Horsepower ratings not in parentheses are phase to phase, 208 to 240V AC. Those in parentheses are phase to neutral, 120V. See pages A-44 and A-45 for accessories. See page A-50 for technical information. A-38
4 Pole, 4 ire Non-rounding 20, 30, 50, and 60 Ampere 3Ø YE 120/208 Volts Receptacles and INSULRIP Plugs 4 Pole, 4 ire Non-rounding Receptacles and Plugs Rating Configuration Cord Dia. Catalog No. 20A 3Ø 120/208V Receptacle, HBL7250 Z X X Z black phenolic. 20A 3Ø 120/208V Y Y Plug, nylon,.390-.775" HBL7251C angle 4-position. (9.9-19.7) 30A 3Ø 120/208V Receptacle, HBL8330A Z X X Z black RTP* 30A 3Ø 120/208V Y Y Plug, nylon..625-1.310" HBL8331C NEMA 18-30R NEMA 18-30P (15.9-33.3) UL Listed UL Listed 30A 3Ø 120/208V 3 HP 3 HP Plug, nylon,.625-1.310" HBL8332C angle 4-position. (15.9-33.3) 50A 3Ø 120/208V Receptacle, HBL8350A Z black RTP* X Z X 50A 3Ø 120/208V Y Y Plug, nylon..625-1.310" HBL8351C NEMA 18-50R NEMA 18-50P (15.9-33.3) UL Listed UL Listed 50A 3Ø 120/208V 7.5 HP 7.5 HP Plug, nylon,.625-1.310" HBL8352C angle 4-position. (15.9-33.3) 60A 3Ø 120/208V Receptacle, HBL7301A black RTP* Z X X Z 60A 3Ø 120/208V Y Y Plug, nylon..625-1.310" HBL7303C NEMA 18-60R NEMA 18-60P (15.9-33.3) UL Listed UL Listed 60A 3Ø 120/208V 7.5 HP 7.5 HP Plug, nylon,.625-1.310" HBL7302C angle 4-position. (15.9-33.3) Note: Horsepower ratings listed above are AC only. Horsepower ratings are phase to phase, (208 to 240VAC). *RTP is an abbreviation for reinforced thermoplastic polyester. Accessories Cover Plates NEMA 18-20R UL Listed 2 HP Steel 4" (101.6) sq. 1 2" (12.7) raised, 813 7.3 cubic inch capacity. Steel 4 11 16" (119.0) sq. 1 2" (12.7) raised, 888 10.3 cubic inch capacity. Stainless steel 302/304 smooth. IP20 SUITABILITY NEMA 18-20P UL Listed 2 HP IP44 SUITABILITY eatherproof Lift Cover Plates ray, thermoplastic, corrosion-resistant, for two-gang FS/FD box having plate mounting holes 3 1 4"x 3 3 4"on center. Same as above except yellow. PLUOUT Lockout Device Electrical plug lockout device. Catalog Numbers S701 Catalog Numbers HBL7777A HBL77CM77A Catalog Number HLD2 2.38" (60.5) 1.39" (35.3) 2.88" (73.2) 3.64" (92.5) #6-32 UNC-2B 4.5" (114.3) HBL7250 2.34" (59.4) HBL7251C 1.81" (46.0) HBL8330A 4.13" (104.9) HBL8331C 3.38" (85.9) HBL8332C 1.19" (30.2) 1.61" (40.9) Discontinued when stock is exhausted 2.37" (60.2) 2.28" (57.9) Catalog numbers shown on gray background will be discontinued when stock is exhausted. Straight Blade Devices 20A, 30A, 50A & 60A A-39
2 Pole, 3 ire rounding 16 Ampere, 250 Volts International 20 Ampere, 250 Volts North American Rated I.E.C. 320 Appliance Couplers.22" (5.6) 1.47" (37.3) 1.28" (32.5) 1.64" (41.7) H320B 1.19" (30.2) Inlets Catalog Numbers 20/16A 250V AC I.E.C. straight blade H320B Same as above with retention clamp. H320BL 1.28" (32.5).22" (5.6) 1.47" 1.19" (37.3) (30.2) 1.95" (49.5).41" (10.4) 1.64" (41.7) H320BL 1.42" (36.1) Connector IP20 SUITABILITY 20/16A 250V AC I.E.C. straight blade. H320C Catalog Number H320C 2.75" (69.9) 1.52" (38.6) 1.36" (34.5) Plug I.E.C. 320 Compatible IP20 SUITABILITY 20/16A 250V AC I.E.C. straight blade. H320P Catalog Number H320P 1.55" (39.4) 1.41" (35.8) 1.52" (38.6) Receptacle I.E.C. 320 Compatible Catalog Number 20/16A 250V AC I.E.C. straight blade. H320R Note: See page A-51 for technical information. 1.89" (48.0) H320R A-40
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 and 250 Volts Hazardous Location Receptacles, Plugs, Boxes and Accessories Acceptor Hazardous Location Receptacles SB Series Boxes Hub Size Accessories Thread lubricant, 6 oz. Drain and breather. Strain relief grip cable range.540 to.635" (13.7 to 16.1). Catalog Numbers Explosion and dust ignition proof. URO20231 URO20232 Class I, Div. 1 & 2, roups C, D URA20231* URA20232* Class II, Div. 1 & 2, roups F, Class III NEMA 3, 7 B C D, 9 F *URA version includes an adapter plate for mounting to Crouse-Hinds EDS series and Appleton EFD series back boxes. UL Listed for Class 1, Div. 2, roups B, C, D. Acceptor Hazardous Location Plugs where applicable Catalog Numbers NEMA 5-20R 20A 125V UL Listed Catalog Numbers Single-ang Single-ang Two-ang Dead End Feed Thru Dead End 1 2" SB1 SB4 SB7 3 4" SB2 SB5 SB8 Class I, Div. 1 & 2, roups C, D Class II, Div. 1 & 2, roups E, F, Class III NEMA 7 C D, 9 E F **Suitabilities Class I Div. 1 & 2; roups C, D, Class II Div. 1 & 2; roups E, F,, Class III. Catalog Numbers LUB6 KDB1** UM NEMA 6-20R 20A 250V UL Listed Explosion and dust ignition proof. UP15231 UP20231 UP20232 Class I, Div. 1 & 2, roups B, C, D Class II, Div. 1 & 2, roups E, F, Class III NEMA 3, 7 B C D, 9 F Catalog numbers shown on gray background will be discontinued when stock is exhausted. NEMA 5-15P 15A 125V NEMA 5-20P 20A 125V NEMA 6-20P 20A 250V 1.51" (38.4) 3.00" (76.2) URO20231 UP15231 3.00" (76.2) 2.55" (64.8) SB1 3.00" (76.2) SB5 6.50" (165.1) SB8 2.25" (57.2) 4.62" (117.3) 1.69" (42.9) 4.63" (117.6) 2.25" (57.2) 4.63" (117.6) 2.25" (57.2) Discontinued when stock is exhausted 4.63" (117.6) Straight Blade Devices ACCEPTOR System A-41
Accessories For 15 and 20 Ampere, 125 and 250 Volts and 277V AC Devices P8 all Plates, Single ang Single Receptacle with Face Duplex Dia. 1.39" Color Receptacle (35.3) Smooth nylon. Ivory P8 P7 Brown P8X P7X ray P8 P7 Black P8B P7B Red P8R P7R hite P8 P7 Stainless 302/304 satin, smooth. S8 S7 Brass.040 (1.02) brushed, smooth. B8 B7 Aluminum, anodized, smooth. A8 A7 P7 HBL5222 IP44 SUITABILITY eatherproof Lift Cover Plates Single Receptacle with Face Duplex Dia. 1.39" Receptacle (35.3) Polycarbonate, gray, for FS/FD box mounting. HBL5221 HBL7423O Polycarbonate, yellow, for FS/FD box mounting. HBL52CM21 HBL74CM23O Polycarbonate, gray, for device mounting. HBL5222 Polycarbonate, yellow, for device mounting. HBL52CM22 Cast aluminum for FS/FD box mounting. HBL5206O HBL7420 Cast aluminum for device mounting. HBL5205O Note: All weatherproof plates are UL Listed for et Locations. Those with suffix O are listed for use with cover open, all others with cover closed. See plate section for more details. HBL5206O HBL7423O A-42
Accessories For 15 and 20 Ampere, 125, 250 Volts and 277V AC Devices eatherproof Lift Cover For Nylon Flanged Inlets & Flanged Receptacles Polycarbonate, gray, for FS/FD box mounting Note: See plate section (D) for more details eatherproof Boots Seal-Tite triple seal, black elastomer cover for Insulgrip plugs, (HBL5266C style), when used in a cord set, and connectors (HBL5269C style), when used with flanged inlets. Same as above except yellow. Seal-Tite Triple seal, black elastomer cover for use with Insulgrip connectors, (HBL5269C type), when used in a cord set. Same as above but yellow. Closure plug, black. Closure plug, yellow. PLUOUT Device IP44 SUITABILITY IP55 * SUITABILITY Note: Boots are not UL Listed. *IP55 when installed and used properly with mating components. Electrical plug lockout devices for molded on plugs. Electrical plug lockout device for wired on plugs. Note: See Section for complete detail on lockout devices. 3.14" (79.8) HLDMP Catalog No. P1 Catalog No. HBL6017 HBL60CM17 HBL6018 HBL60CM18 HBL6019 HBL60CM19 Catalog No. HLDMP HLD 4.22" (107.2) P1 HBL6017 HBL6018 HBL60CM19 Shown with HBL6018 4.27" (108.5) HLD 7.27" (184.7) Straight Blade Devices Accessories A-43