Type series booklet.1/ -- SERIE 0 Twin plate check valves Carbon steel and stainless steel body s to mm ( to 1 ) Class 1 and Class Applications Industrial process, chemicals, petrochemicals, sugar industry, pulp and paper industry,... Water supply, desalination,... Marine applications: air, gas, hydrocarbon,... General circuits: water, air, gas,... Working conditions Temperature range: --19 C to + C The working temperature depends on the body, plates and seat materials (refer to table page ). Maximum working pressure (PS): bar Vacuum service down to 0 bar absolute. Maximum fluid velocity: -- on liquids: refer to diagram page -- on gas: 7 m/s. Materials KSB code Body: -- carbon steel ASTM A 1 gr. WCC / 1.019 1 -- stainless steel ASTM A 1 gr. CF M 1.0 Plates : -- stainless steel ASTM A 1 gr. CF M Seating system: -- metal/elastomer with AMRING! seat in high content nitrile K EPDM X VITON! V -- metal/metal M Springs: -- 1 stainless steel: metal / elastomer seating -- Inconel 0 : metal / metal seating Springs: Internal pieces in Monel 00 For the other parts, please refer to the part list (page ) Standard design One--piece wafer type body ensuring maximum life and corrosion resistance Twin plate configuration. types of seat: metal/elastomer or metal/metal Upstream/downstream sealing: -- check valves with metal/elastomer seating in accordance with NF E 9--11 rate, ISO 0 category A, API and DIN 0 rate 1, -- check valves with metal/metal seating in accordance with API. Face--to--face dimensions in accordance with API 9. Connection between flanges: -- PN, 1, and ASME B 1-- cl.1 for check valves class 1, -- PN, 0, and ASME B 1-- cl. for check valves class. Marking in accordance with EN 19 standard. External coating for steel body: polyurethane paint, 0 m thickness, colour blue RAL 0. External coating for stainless steel body: pickling and passivation, no coating. The valves meet the safety requirements of the pressure equipments Directive 97//EC (PED) appendix 1 for fluids of the groups 1 and. Standard variant ATEX version in accordance with 9/9/EC directive. Data to be supplied when ordering Serie 0 check valve, in accordance with type series booklet.1/ --.. Connection drilling pattern. Working conditions: -- nature of fluid, -- pressure, -- temperature.
Construction.1. 7--.1 7--. --. 970 90-- 90. 1 --.1 --. --. --. 7 --. 90.1 Item Designation (mm) Materials Body to Carbon steel or stainless steel.1 Pin retainer to 1 stainless steel. Pin retainer to 1 stainless steel 7 Spring (right hand) to 1 stainless steel ou Inconel 0 --.1 Friction washer to PTFE filled or 1L stainless steel --. Friction washer to PTFE filled or 1L stainless steel --. Friction washer to PTFE filled or 1L stainless steel --. Friction washer to PTFE filled or 1L stainless steel --. Friction washer to PTFE filled or 1L stainless steel --. Friction washer to PTFE filled or 1L stainless steel 1 Grooved pin to Stainless steel 7--.1 Plate to Stainless steel 7--. Plate to Stainless steel 90-- Eye bolt to Carbon steel 90.1 Stop pin retainer to Carbon steel 90. Hinge pin retainer to Carbon steel 970 Identification plate to Stainless steel
Production range In pressure class PN 0 and Class (eurppean materials), Serie 0 check valves are in accordance with EN 11--1. The values in the table below must be used for valves which have to comply with PED 97//EC: Nominal Material Working pressure in bar for temperature C pressure Body Seat --19 -- 0 1 7 00 0 PN 0 1.019 Metal/Metal not allowed 19, 19, 1, 17,1 1, 1, 1,0 11, 11,0,, not allowed Nitrile not allowed 19, 19, 1, 17,1 not allowed 1.0 Metal/Metal 19, 19, 19, 1, 1, 1,0 1,7 1, 1,0 11, 11,,9,7,, Nitrile 19, 19, 19, 1, 1, not allowed Class 1.019 Metal/Metal not allowed 9, 9, 7,1, 0,1,0,9 9, 7, 7,,7 not allowed Nitrile not allowed 9, 9, 7,1, not allowed 1.0 Metal/Metal 9, 9, 9,,,0 7,9,, 0,,, 7, 7,1,, Nitrile 9, 9, 9,,,0 not allowed In pressure class 1 and, Serie 0 check valves are in accordance with ASME B 1-- Standard class 1 and according to the following table: Nominal Material Working pressure in bar for temperature C pressure Body Seat --19 -- 9 19 0 1 71 99 7 A 1 Metal/Metal not allowed 0,0 0,0 17,7 1,9 1, 11,7 9,7, 7,,, not allowed Gr WCC Nitrile not allowed 0,0 0,0 17,7 not allowed Class 1 A 1 Metal/Metal 19,0 19,0 19,0 1, 1, 1, 11,7 9,7, 7,,,,, 1, Gr CFM Nitrile 19,0 19,0 19,0 1, not allowed A 1 Metal/Metal not allowed 1,7 1,7 1,,,,9 1,7 0,7 9,,, not allowed Gr WCC Nitrile not allowed 1,7 1,7 1, not allowed Class A 1 Metal/Metal 9, 9, 9,,7,,,1 1,0 0,7 9, 9, 9,0 9,0,,1 Gr CFM Nitrile 9, 9, 9,,7 not allowed Pressure Materials Type Working class Body Plates Seat temperature Connections PN 0 / Class 1 Metal / metal 1M from --9 to +7 C Steel Nitrile 1K from --0 to + C PN, 1 and Stainless steel Metal / Metal M from --19 to + C Stainless steel ASME B1. cl.1 Nitrile K from --0 to + C Class Metal / Metal 1M from --9 to +7 C Steel Nitrile 1K from --0 to + C PN and 0 Stainless steel Metal / Metal M from --19 to + C Stainless steel ASME B1. cl. Nitrile K from --0 to + C
Pressure drops in flow water 1 0 1 1 0, 0,1 0,0 0,01 0,00 Head loss in bar 0,001 1 Flow in m /h 0 1 000 000 The curves in continuous line define the flow range for the optimum use of the check valve. Flow coefficient in full open position mm inch Kvo Cvo 7 7 1/ 11 0 11 1 0 7 Zeta 1,77,7,9,77 Units:Kvoinm /h/bar 1/ --CvoingallonUS/mn/PSI 1/ Flow coefficient in full open position mm inch Kvo Cvo 1 1 7 70 1 1 1 Zeta 1,9 1, 1,1 1,1 0,7
Class 1 - Dimensions (mm) and weight (kg) Ød1 Øe1 R e l1 Connection PN PN 1 PN 0 PN Class 1 Weight mm inch Ød1 l1 Ød1 l1 Ød1 l1 Ød1 l1 Ød1 l1 kg 0 1 1/, 1, 1,0 19,0, 1, 1,0 19,0, 1, 17, 19,0, 1, 170,0 19,0, 1, 17, 19,0,,0,, 11,0 1 1 0,0 7,0 0,0 0,0 0,0 7,0 0,0 0,0 0,0 7,0 0,0 07,,0,0,0 0,0 0,0 7,0 0,0 09, 1,,0,0 7,0 Plate clearance mm inch e1 e R 0 1 1/ -- 7,,,,,7 0 Plate clearance mm inch e1 e R 1 1 1 191 0,,,0 70, 1 1 1
Class - Dimensions (mm) and weights (kg) Ød1 Øe1 R e l1 Connections PN PN 0 PN Class Weight mm inch Ød1 l1 Ød1 l1 Ød1 l1 Ød1 l1 kg 0 1 1/ 9 19 1 170 19 9 19 1 170 19 111,0 19, 1,,0 1,0 111,1, 19,0,0 1,9,1, 1 1 1 0 9 0 9,9 0,, 0,, 07,9 1,9, 1,, Plate clearance mm inch e1 e R 0 1 1/ -- 7,,,,,7 0 DN Plate clearance mm inch e1 e R 1 1 1 191 0,,,0 70, 1 1 1
Installation The Serie 0 check valve design allows a rapid and easy installation between standardized flanges : reduced weight and overall dimensions no additional pipe supports are required suitable for horizontal and vertical up flow no special tools are needed for installation low maintenance. The Serie 0 check valves, in the standard configuration, is offered with flat faces (FF). On request, raised faces (RF) can be supplied. The flange faces are machined Smooth finish (Ramax.:, )or Stockfinish. Optimum installation In a horizontal pipe, the check valve must always be installed with its hinge pin in the vertical position. CORRECT WRONG When the check valve is insered in a vertical pipe, it will function correctly only if the fluid moves upwards (for a fluid moving downwards, please consul us). In a piping system, some minimum distances must be rspected between the check valve position and a bend or a tee. The following drawings show some horizontal pipe configurations (viewed from above) in which the check valve is installed with its hinge pin in the vertical position. The minimum recommended distance for a check valve installed downstream from a bend, tee, pump or valve causing flow disturbance is diameters. When such a unit is downstream of the check valve, it is necessary to respect a distance of at least diameters. DN DN DN DN DN DN DN DN 7
.1/-- 7.0.0 This leaflet is not contractual and may be amended without notice KSB S.A.S., allée des Barbanniers 9 Gennevilliers Cedex (France) Tel.:+11770 Fax:+1177 www.ksb.com