Stromme Pump Spray Foam System Product description A compact, versatile, effective and easy to assemble cargo hold cleaning system. This spraying system can be used either with the stainless steel lance and nozzles for cleaning with acid or with the aluminium spray foam lance for alkaline cleaners. The Stromme Pump Spray Foam System is a specifically designed spraying applicator used for applying Stromme products like Aquaclean HD, Stromme Holdcoat FC, Stromme Rust Remover, Stromme Cement Remover and Stromme Deck Cleaner. Stromme PB 25 PPT diaphragm pump is portable and mounted on a trolley to make handling and moving around easy enough for a single person. The Stromme Pump Spray Foam System is delivered in a foldable storing container which makes it convenient for transport and storage. Performance curves With the acid nozzle 3201-24056 and the chemical nozzle kit 3201-22250, estimated spraying height can reach 21 meters. Air supply Stromme Pump Spray Foam System complete Product No. 3201-25000 Lifting height Bar Meter 8 80 Stromme Polypropylene pump kit PB 25 PPT Aluminium foam lance for alkaline cleaning Stainless steel lance for acid cleaning The illustrated pump performance curves are measured using fresh water under ideal conditions. Actual pumping values can vary under different condition of application. Proportionately lower pumping result will occur if air supply is restricted. 6 4 60 40 Example To pump 30 l/min flow rates with a discharge lifting height of 40 meters requires 4.1 bar and 283 l/min air consumption. WARNING 2 20 Never use the aluminium lance kit and nozzles for spraying strong acids. 30 l/min 0 20 40 60 80 100 Discharge in litres per min
Pump technical data Air supply 6.2 bar / 90 psi Maximum air supply 7.2 bar / 105 psi Temperature limits 4 C / 40 F to 104 C / 220 F Maximum particle size 3.2 mm Suction lift 3 meters Air inlet Claw coupling Fluid inlet Claw coupling Fluid outlet Claw coupling Pump height 547 mm Pump width 312 mm Pump depth 230 mm Pump weight 11.5 kg Mounting Bolted to trolley Pump construction Wetted material Non wetted part Bonded diaphragm Ball material Seat material O-ring Polypropylene Aluminium NOTE! The above kit does not include couplings to connect the system to the ship s deck water and air line. If couplings are required, please advise us the type or IMPA number used on board the vessel.
Ready packed box Air hose, ¾" x 50 meters and Chemical hose, 1" x 5 meters Chemical hose, ¾" x 40 meters Stromme Polypropylene pump kit PB 25 PPT Foam lance and acid lance Nozzle fitted with rubber cup Rubber cup Acid nozzle 5 mm Acid nozzle ¼", 15, 090 Chemical nozzles, 3 pieces Mixing drum and suction pipe with couplings Scope of supply Product No. 3201-25000 Complete Stromme Pump Spray Foam System consists of following. 3201-24060 Stromme Polypropylene pump kit PB 25 PPT. 1 3201-30101 Air inlet kit with valve & claw coupling SS316, ½". 1 3203-27099 Repair kit for Stromme pump PB 25 PPT. 1 3201-22200 Mini-Jet with lance kit in aluminium, 4 pieces 4.8 meters in total. 1 3201-22250 Chemical nozzles, 3 pieces. 1 3201-30050 Acid lance with valve and claw coupling SS316. 1 3201-24056 Acid nozzle 5 mm. 1 3201-24057 Acid nozzle ¼", 15, 090. 1 3201-30300 Suction pipe PVC, 1½" x 1 meters with claw coupling. 1 3201-20350 Air hose PVC, ¾" x 50 meters with claw coupling on both ends. 2 3201-30350 Chemical hose, 1" x 5 meters with claw coupling SS316. 1 3201-30200 Chemical hose, ¾" x 40 meters with claw couplings SS316. 1 3201-30310 Mixing drum only. 1 3201-30500 Storing container KLK 1208 with lid. 1
Additional equipment Stromme Tripod Product No. 3201-50150 Stromme tripod designed specifically for helping cargo hold cleaning to save time and labor. The full weight of the long lance is supported by the tripod. This provides leverage for a single person to move the long lance around easily. Designed with different lance holders to fit specific lance. The lance clamping position can be adjusted to suit individual height and preference. Lance holder pivoted on tripod can rotate 360⁰ Portable to carry and easy to assemble by a single person. Fitted with breakable wheels to move around easily and station by engaging the brakes on the wheels. Personal protection equipment Stromme Personal Protection Kit for 2 persons Product No. 1705-71100 Splash suits / chemical suits are normally delivered in size L Product No. 1705-71100 Complete Personal Protective Kit for 2 persons consists of following. 1703-55152 Splash suit, chem-suit HD (L). 2 1705-10102 Helmet, safety white. 2 1705-20131 Visor holder complete with visor. 2 1705-34110 Chemical gloves 40 cm. 2 1705-23300 Safety goggles Uvex 9301, antifog. 2 Respiratory Protection (optional) Filters shown on these masks are sold separately Part No. Description 1705-55330 Half mask, X-plore. 1705-55270 Full face mask, X-plore. 1705-73881 Filter, X-Plore - single piece.
Stromme Standard Protection Kit Product No. 1705-81100 Product No. 1705-81100 Complete Stromme Standard Protection Kit consists of following. 1703-56100 Splash suit, large. 4 1704-34110 Chemical resist gloves, solvex premium 38 cm. 1705-55330 Half mask, X-plore. 2 1705-55270 Full face mask, X-plore. 2 1705-73881 Filter, X-Plore - single piece. 12 4 Stromme Acid Protection Kit Product No. 1705-81200 Product No. 1705-81200 Complete Stromme Acid Protection Kit consists of following. 1703-56100 Splash suit, large. 4 1704-34110 Chemical resist gloves, solvex premium 38 cm. 1705-55330 Half mask, X-plore. 4 1705-73881 Filter, X-Plore - single piece. 8 4 Chemicals Stromme Aquaclean HD Product No. 3205-10100 Stromme Aquaclean HD is a well tested and effective product developed from the extensive experience of Stromme staff involved in cleaning operations of cargoes such as petcoke, coal and other "oily" cargoes carried as dry bulk. Depends on the kind of contaminants to be removed it is normally used in a mixed ratio of 1:2 up to 1:9 with fresh water. Cost-effective heavy duty alkaline cleaner. Water-base, biodegradable and non-flammable.
Stromme Holdcoat FC Product No. 3205-20500 Stromme Color White FC Product No. 3205-20600 Stromme Holdcoat FC protects the paint against corrosion and stains from a wide range of cargoes Environmentally friendly and does not contaminate the cargo it is therefore safe for carrying food cargo and it is approved by FDA. Meets Marpol Convention MEPC 63, Annex 5. Upon applying it appears white in color, hence visible to the eye to see where the protective coats are applied, when dried it changes from white to transparent. To make Stromme Holdcoat FC visible in white after drying Stromme Color White FC is to be added prior applying. Stromme Color White FC is an additive color white pigment mixed together in a ratio of 10% with Stromme Holdcoat FC to make Stromme Holdcoat FC visible when dried to the port authority and surveyor to ascertain that the cargo holds are protected. Stromme Holdcoat FC mixed together with Stromme Color White FC is applied before loading as a protective barrier between the cargo and the cargo hold will reduce the cargo holds cleaning time. 100% FDA approved ingredients Stromme Cement Remover Product No. 3205-30150 Stromme Cement Remover is an acid detergent product specially developed to remove cement residues in cargo holds from bulk carrier transporting cement that often resulted in tedious cleaning and maintenance cost. It is a quick acting, cost saving and easy to apply product replacing the commonly used chemical Hydrochloric (muriatic acid) which can often damage and shorten the lifespan of the cargo hold paintwork and caused pitting in steel. Very effective in removing cement, lime wash and residues of iron ore. Contains inhibitors to protect the steel from hydrogen corrosion. The surfactants have a good ecological profile. The product is not hazardous to the marine environment (NOT-HME) as per GHS criteria.
Stromme Rust Remover Product No. 3205-31126 Stromme Rust Remover is an acid detergent concentrate used for the removal of rust residues from deck paint. The quickest in his class and reacts autonomously, it is a highly effective rust remover with fast performance for deck cleaning plus the surfactants provide good soil removal properties that ensured all other dirt particles are removed in one continuous cleaning process. Contains powerful inhibitors to protect the steel from hydrogen corrosion. Leaves no white residue. Can be used on many surfaces on ship exteriors. The surfactants have a good ecological profile. The product is not hazardous to the marine environment (NOT-HME) as per GHS criteria. Very cost effective to use. Stromme Ships Cleaner Product No. 3205-30400 WARNING Stromme Ships Cleaner is a mild alkaline concentrated ships washing detergent with strong soil carrying capacity. It is specifically formulated for the cleaning of the ship s deck and the superstructure from all organic residues, it effectively removes deposited stains of typical dirt on ship s deck, accommodation and engine room. It has a demulsifying effect which helps to assure a smooth operation of the bilge water separator. Quick and easy deck cleaning solution. Good dirt carrying capacity. Anti -static properties. Has a good ecological profile. The product is not hazardous to the marine environment (NOT-HME) as per GHS criteria. The cleaning chemical is strong and effective even in high dilution and therefore very economical to use. Adequate equipment for personal protection must be used and respiratory protection with half or full face mask is necessary when working with chemicals and equipment.