BMW G650X special parts

BMW G650X special parts 1 2 3 4 5 6 Handlebar Cockpit Windscreens Lighting from page 534 Engine guard Cylinder protection fairing from page 540 Foot pegs/hand gear from page 544 Tank bag from page 548 Tail rack bag from page 549 Pannier systems from page 551 www.touratech.de/bmwg650x

5 4 1 6 2 3

536 20 mm Handlebar Riser BMW G 650 X Challenge/Moto/Country We have developed a handlebar riser for the Xchallenge, which you will find quite easy to fit. It provides a more upright and relaxed seating position. This reduces tension in the shoulders and wrists. And the handlebar riser is also helpful when racing, because the more upright standing position means both your endurance and concentration are improved. Also, bike control is improved. - Height increase approx. 20 mm - includes extra long screws - from anodized aluminium 049-0109 (not for abs) GPS Bracket Adapter G 650 X Challenge/Moto/Country Fits to the handlebar clamping support 049-0111 Kaoko Cruise Control, mechanical cruise control, for BMW G650X Country 330-0029 Headlight Protector PC G 650 Xcountry The Headlight protector G 650 Xcountry PC is manufactured out of polycarbonate. It mounts to the head light bezel of the G 650 Xcountry with spacers and longer screws. The material is extremely tough, non-shattering and is almost invisible and meshes with the appearance of the motorcycle very well. Everything required for mounting is included with delivery. The headlight protector does not have German TÜV-type approval and was developed for off-road and daytime use only. 044-2018 Headlight Protector Steel G650Xchallenge Even the biggest rocks won t damage your headlight with our steel headlight protector. It consists of a strong corrugated grid that is welded directly to the frame, and is completely powdercoated. Assembly is as straightforward as you would think, and it is attached directly to the headlight bracket of your BMW. No need for drilling or major conversions! This headlight protector has been developed for off-road use. 049-0145

Rally Fairing with Aluminium Stem G650X Ideal, beautifully shaped rally fairing for medium- and long-distance rallies. The new Touratech glass fibre reinforced plastic Flex makes the fairing extremely strong whilst maintaining flexibility. The aluminium stem is designed for maximum stability, and provides optimum support for the lights, fairing and instrument holder in all terrain situations. The lighting unit offers the latest long-lasting and stable lighting technology with Xenon headlight and DE dipped headlight (triple-axle ellipsoid). The instrument holder is already prepared for the mounting of the optional instrumentalisation: motorbike computer IMO 50 (page 1022) and the roadbook holder RB-TT (starting from page 1016). Also offers the option of individual instrumentalisation and fits even with the original instruments, for instance to mount one or more GPS devices. It is easy to fit, which means the rally fairing is quickly and easily fitted and removed. The original steering lock can stay, and mounting is possible with the large Touratech tank (page 530) and the original tank cover. Only the front mudguard will have to be replaced by the optional Touratech sport mudguard (see below). Parts supplied: Fairing in TT glass fibre reinforced plastic Flex (unlacquered), strong aluminium stem, Xenon headlight and DE dipped headlight (triple-axle ellipsoid) including control unit, plus instrument holder and detailed instructions. Rally fairing G650X 049-0140 Fairing, handlebar riser BMW G650X 537 15 mm Handlebar Riser BMW G 650 X Challenge/Moto/Country With this handlebar riser, you can not only raise the height of your Xchallenge handlebars by some 15 mm, you can also increase or reduce your horizontal distance to the handlebars. For the taller rider this means less strenuous riding when standing and thus an increase in endurance and concentration. This makes fast and difficult tracks easier to master. Ideal for sporty off-road use. - Height increase approx. 15 mm - additional displacement of 15 mm for altering the distance between rider and handlebars - from anodized aluminium - original clamp parts still used 049-0110 (not for abs)

538 Long-Distance Travel Tank Conversion for the BMW G 650 Xchallenge With the auxiliary tank developed by TT3D, you can almost triple the range of your G 650 X. Touratech has managed to produce an extra 16 litres of fuel capacity. Once your G650X is fitted with this auxiliary tank, with ist unlimited off-road capability, you ll have 25 litres of petrol on board and be able to cover distances up to 550 km (350 miles) on the BMW without even smelling a petrol station. A German TÜV type approval is Included. 049-0130 Sport Tank Cap G 650 Xchallenge Elegant CNC-milled tank cap without lock. For faster, easier tanking in competition use. No time-wasting locking or unlocking during pit stops. Anodised in two colours, this strong and functional sport tank cap is also a treat for the eye. 049-0135 Hyperpro Progressive Replacement Fork Springs, BMW G650 XChallenge A replacement for the original fork springs from Hyperpro, the Dutch specialist for suspension products. The progressive springs have been designed to match the G650XC perfectly, and offer a tremendous improvement in response and greater safety in extreme situations. Delivery includes detailed installation instructions, the correct fork oil and a paste to improve the slippage of the dip tubes. 040-7403 BMW G 650 X Neopren Fork Protector The new Neopren Fork Protectors effectively protect the stanchions of the USD fork from mud, dirt and stones. The fork sealing rings are also protected and thus have a longer service life. 044-2100 BMW G 650 X Neopren Fork Protector with Velcro Strap Neither fork disassembly nor tools are necessary for installation. The Fork Protectors are simply wound around the stanchions and the Velcro strap closed. The ends are then attached by cable ties to the sliding tube. 044-2102

Hand Protectors BMW G650X 539 Stainless Steel Headlight Protector, Black, with Quick Release Fastener Even the biggest stones won t be able to damage your headlight with this headlight protector! New durable stainless steel model now available with quick release fastener. Now you can clip on the headlight protector and detach it again as needed. It comes with everything you need to fit it. This headlight protector has been developed for offroad use and is not approved for street use. 049-5095 Touratech Hand Protectors BMW G650/all models/with or without ABS - Optimum protection (brake and clutch levers) - Optimum protection for your hands - Robust even at high speeds - Good wind deflection (with spoiler) - Elegant design enhances the enduro looks - Many colours available - Hand protector colours: black (1), yellow (2,) blue (3), red (4), white (5) When ordering, please substitute the X on the end of the order number for the number in brackets 040-669X hand protectors Spoiler for Touratech Hand Protectors GD 040-730X Rear Light Conversion for your BMW G 650 Xchallenge, LED version! A completely new tail look! Dual rear lights (= double security if one light breaks down). As all parts have an approval sign, they need not be registered! 049-0440 Rear light conversion LED

540 Manifold Guard, Flexible, G650X This heat shield is made from laser-cut stainless steel. Thanks to the special construction it can easily be adapted to any manifold shape. Not only does it provide heat protection, but it also protects the endangered points of the exhaust system against stone-chipping or in the event of a fall. Length: 28 cm. Supplied with: 1 pce., including 2 collars 370-1538 049-0116 Aluminium Exhaust Heat Shield BMW G 650 X Challenge/Country/Moto The heat shield is made from anodized aluminium. This means it is lighter the BMW original, while retaining its robustness. It fits slickly into the overall appearance of the G 650 X. Not only does it provide heat protection, it also provides protection of endangered points of the exhaust system against thrown up stones or when a crash occurs. And the manifold shield also protects the lambda probe. - Simple, uncomplicated replacement of the origi nal shield - Uses the original screws Shield, manifold centre 049-0116 Shield, rear muffler 049-0118 049-0118 Radiator Hard Part As the radiator of the G650X is transversemounted and thus extends to very near the fairing, damage is possible even in the event of only minor accidents. The answer here is our Radiator Hard Part. It is compatible with our engine guard and aluminium radiator guard. 049-0540

Rear Carbon Exhaust Heat Shield BMW G 650 X Challenge/Country/Moto The rear exhaust heat shield not only fulfils its purpose, it also imparts a thoroughbred appearance to your Xchallenge. It s made from light carbon. As opposed to the OEM heat shield, it combines top-quality materials and a thoroughbred appearance with a reduction in weight. - Simple, uncomplicated exchange for the original shield - Uses the original screws 049-0180 Small Carbon Exhaust Heat Shield BMW G 650 X Challenge/Country/Moto The small exhaust heat shield not only fulfils its purpose, it also imparts a thoroughbred appearance to your Xchallenge. It s made from light carbon. Alongside its primary function, it also protects the Lambda probe. As opposed to the OEM heat shield, it combines top-quality materials and a thoroughbred appearance with a reduction in weight. - Simple, uncomplicated exchange for the original shield - Uses the original screws 049-0160 Exhaust heat shield, Frame protection BMW G650X 541 Big Carbon Exhaust Heat Shield BMW G 650 X Challenge/Country/Moto The big exhaust heat shield not only fulfils its purpose, it also imparts a thoroughbred appearance to your Xchallenge. It s made from light carbon. As opposed to the OEM heat shield, it combines top-quality materials and a thoroughbred appearance with a reduction in weight. - Simple, uncomplicated exchange for the original shield - Uses the original screws 049-0170 Frame Guard Kit BMW G650 X Challenge/Country/Moto Thanks to its plastic manufacture, the frame guard is extremely strong, while at the same time being extremely light. If fits perfectly on to the frame of the BMW G 650 X and ensures the frame is protected against boot damage, especially during standing riding. The radically simple mounting enables quick assembly. Then you re ready to hit the road. 049-0190 (left and right)

542 Carbon - Clutch / Alternator Cover Guard BMW G 650 X Challenge/Country/Moto This shapely and top-quality guard prevents scratching and more severe damage to your clutch cover. The use of carbon, which is both light and robust, ensures the cover is protect against scratching and more severe damage. An unprotected plastic cover is not only at risk during serious off-road expeditions through rough terrain. Even during smooth rides in a seated position, enduro boots can cause annoying scratches. You ll also be amazed how quickly and easily our guard can be mounted. Clutch cover guard 049-0200 Alternator cover guard 049-0201 Oil Drain Plug BMW G 650 X The original oil drain plug on the G 650 X protrudes well out of the engine housing, and partly even beyond the engine guard. That can lead to damage any time the bike is bottoming out. For this reason we have developed a replacement part that is quick and easy to install (replacement possible even without oil change!). The plug has an approx. 6 mm flatter head than the original plug. It therefore fits perfectly under the Touratech engine guard (049-0107), but also far better under the original engine guard. Made of anodised aluminium with copper sealing ring. 049-0360 Kick Stand Support Extension G 650 Xchallenge The G 650 Xchallenge stands much more firmly even on quite a soft surface with this kick stand support extension. Even if you park the motor bike on a meadow you do not always have to look for a small plank of wood or another base. This practical part is made of a combination of stainless steel laser parts and anodised aluminium. Quick and easy to fit. 049-0128

Engine guard BMW G650X 543 Engine Guard BMW G 650 X Sport The G 650 Xchallenge is designed for sporty off-road use and that is exactly where we d like to see it. The experience from numerous races of our offroad racing team has shown that the engine guard of the G650 Xchallenge could use a number of improvements to be suited for rough competition use. For this reason we have developed a sturdy engine guard which, thanks to its stronger material and slightly wider form, protects the alternator, clutch and water pump connection far better than the original. An absolute must for use in rough terrain! - Engine guard of 4 mm aluminium - Sturdy, welded construction - With an opening for the oil drain plug - Screws onto the original mounting points - Includes screws and spacers 049-0212 Large Engine Guard BMW G 650 Xchallenge/Xcountry The G 650 Xchallenge/Xcountry is designed for sporty off-road use and that is exactly where we d like to see it. So that you can use your Xchallenge/Xcountry off the road without any niggling worries, we have developed a robust engine guard. Long years of experience and uncompromisingly rigid testing on our tours have resulted in an exceptionally robust and resilient guard for your engine. - Large engine guard from 4 mm aluminium - Sturdy, welded construction - With an opening for the oil drain plug - Screws onto the original mounting points - Includes screws and spacers 049-0107

544 Folding Brake Lever BMW G 650 X Challenge/Country/Moto The brake lever can break even if you just fall. This will make it very difficult, if not impossible, to go any further. With our brake lever you can reduce this risk easily and effectively because of the folding front lever. In addition, the forces acting on the brake lever will be transferred less strongly to the selector shaft. Should the brake lever get a little bent out of shape it can be straightened again very easily. 049-0123 Foot Brake Lever Extensionl BMW G 650 X Firm, safe pressure on the foot brake lever whether on or off road is vital for optimum braking. Somewhat narrow as standard, our extension offers you an optimum support surface and reliable pressure on the brake at any time. 049-0323 Chain Wheel for BMW G 650 Xchallange chain wheel anodised aluminium 049-0600 47 teeth 049-0601 52 teeth Chain Pinion for BMW G 650 X (all models) chain pinion steel 049-0407 14 teeth 049-0602 15 teeth 049-0603 16 teeth Compared to the original 15 teeth front and 47 teeth rear, combined 14 teeth front plus 52 teeth rear results in approx. 10% reduction in speed and 10% increase in torque. RK Chain, 520 XSO (122 links) In our opinion the 5/8 x 1/4 XW ring chain from RK is one of the best chains for offroad use. Touratech has successfully used the chain for various Dakar races and it is currently used by the BMW-Touratech Racing team. It is noted for its very long life even under extreme conditions. The best quality Made in Japan. 310-0101

Footpeg System BMW G 650 X Right + Left Rear Footpegs We have always wanted these footpegs for our longdistance journeys. Everyone knows the problem: When wearing enduro boots, there is not enough space between them and the brake lever or gear ever. The long-distance footpegs are fitted further back, thus providing optimum space for enduro boots. The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs. Furthermore, they also have new footpeg brackets. These are made like the footpegs themselves of high-quality stainless steel. By contrast with the original cast brackets, these effectively prevent the footpegs breaking off in the event of falling. 049-0351 Footpegs BMW G650X 545 Folding Brake Lever Fixing Kit BMW G 650 X The brake lever can break even if you just fall. This will make it very difficult, if not impossible, to go any further. With our brake lever fixing kit you can reduce this risk easily and effectively because of the folding front lever. 049-0223 Hard Part Side Stand A sharp impact e.g. with a rock or stone may damage or even pull off the side stand holder, and in the worst case parts of the frame. We have developed a fairly small item for sports use that is fitted to the underside of the footpeg holder as a trailing surface - Simple but effective. Also highly recommended for safe travelling or when lowering the bike. 049-0146 Side Stand Folding Down Aid BMW G 650 Xchallenge This small and extremely practical folding down aid helps you to fold down the side stand. It effectively prevents you from slipping off the side stand with your boot. Particularly useful for short and unexpected stops. Simple but clever! 049-0129

546 Chain Guide, BMW G 650 X (Challenge + Country) Off-Road Chain Guide for the BMW G650X Challenge. A chain guide ensures that the chain will align with the sprocket under all conditions. In extreme off-road conditions, or when the chain is loose, or worn out, this becomes more important, for the bike, and for the safety of the rider. Prevent the chain from coming off, ever. The G650X comes with a guard to block entry of a foot or hand into the sprocket in event of a crash. It looks like a chain guide but it does not capture the chain on all sides and guide it onto the sprocket. A chain guide is also very important for longdistance travels where it may be required to use a very worn chain beyond normal service limits. 049-0380 Spray Guard Sport G 650 Xchallenge Sporty replacement for the standard number plate mounting with crisper lines. Ideal for sports and competition use. Upgradeable with our LED flashers 044-0393 (page 187). Equipped with the Sport spray guard and fitted number plate, you are perfectly street-legal. 049-0150 Adjustable Gear Lever G 650 X Challenge/Country/Moto The adjustable gear lever is used to its best advantage with the adjustable foot rest or simply if the position of the original gear lever is not suitable.with this gear lever too the front lever has a spring to enable it to fold thus reducing damage should you fall off.in addition, the forces acting on the gear lever will be transferred less strongly to the selector shaft. Should the folding gear lever get a little bent out of shape it can be straightened again very easily. 049-0127

Mudguard Extension BMW G 650 Xchallenge For even more off-road fun! The mud-guard extension accentuates the sporty, dynamic design of the Xchallenge. Alongside the eye-catching shape, the practical uses are not to be frowned upon: It markedly improves protection against dirt and rain water. A real benefit during fast trail journeys, especially in the rain. The remarkable ease of mounting rounds off this amazing package. 049-0155 Brake/gear lever, mudguard BMW G650X 547 Brake Disc Guard BMW G 650 X Challenge/Country/Moto Danger lurks when you re travelling off-road over rough terrain. Branches and larger stones can damage your brake disc. Our brake disc guard is there to prevent this. It has been proven in many of our off-road rides. Suitable for brakes with and without ABS. - From 5 mm aluminium - Anodized aluminium, unpolished - Includes extra long screws 049-0108 Brake Line Clamp Cover G 650 X Challenge/Country/Moto On the G 650 X the brake line clamp at the front of the fork is in an exposed position and is not protected. If this fragile plastic clamp is destroyed by stones etc., the brake line is no longer fixed to the fork. Then there is a much higher risk that the brake line can be damaged. The clamp cover is made from 1.5 mm anodised aluminium and fixed with the original nuts. 044-2008 EXCEL Wheels for the G650Xchallenge 45,72 und 53,34 cm (18 and 21 inch) Practically indestructible wheels for the off-road Sport Boxer. In order to make the XC even more suitable for off-road use, we have decided to include wheels made by the Japanese stainless steel and precision forge in the range. Combining 18 and 21 inch wheels gives the XC significantly better handling in off-road situations. In our opinion the wheels are vital for sports use. Excel wheels with cross tyres and standard wheels with tyres better suited to the road make the Xchallenge the universal Enduro which can be converted very quickly. 049-0550 (J21x1.60 - front) 049-0552 (J18x2.50 - rear)

548 Tank Bag G 650 X Challenge The tank bag G 650 X Challenge was developed especially for the BMW. Its standard capacity of about 12 litres can be expanded to about 18 litres quickly and easily. An additional pocket at the back provides enough room for storing a purse or documents. There is a small pocket on the left for a multitool or similar items. The rubber strap on one side can be used to fix rain trousers or gloves. The A4 map pocket is fixed to the top of the tank bag with velcro. Removing the tank bag from the motorcycle is very simple and a matter of seconds. Fitting the tank bag is easy with the two buckles at the front and straps at the back. A strong carrying handle and two straps for converting the tank bag into a rucksack are also included. Colours: black, grey with sewn in, reinforced reflective strips/cords. Dimensions: (l x w x h) 29 x 24 x 17/25 cm Capacity: approx. 12/18 litres 055-1151 (Challenge / Moto) 055-1159 (Country)

Tail Rack Bag BMW G650X This practical tail pannier for the BMW G650X has a capacity of 6 litres. Tailor-made, it fits precisely on our large tail rack (p. 550). The pannier has a foam rubber base and robust side panels. It is fastened to the aluminium plate using strong straps. With a zip fastener, you can increase the volume of 4 litres to approx. 8 litres. Size: approx. 22 x 26 x 12 / 20 cm Volume: approx. 4/8 litres 055-1297 Tank bag, tail pannier BMW G650X 549 Tail Rack Bag Enduro BMW 650X A small rear pannier for the BMW 650X. It is a snug fit on the tail and is held by three straps. The pannier has a foam rubber base and robust side panels, which guarantee its slip-free seating. A zip-fastened pouch on its top cover is provided for bits and pieces. Ideal for tools or spare tubes when touring off-road. The small tail pannier BMW 650X has a volume of approx. 5 litres. With a zip fastener, its volume can be increased to approx. 8 litres. Length: 25 cm. Width: front 25 cm / back 16 cm. Height: 12 / 17 cm (extended). 055-1202 Guido Bergmann & Dirk Schäfer Albany

550 Small Luggage Rack BMW G 650 Xchallenge You want to travel lean and mean off-road, but still take a little light luggage? No problem with our luggage rack. We have developed a small and refined luggage rack for the new Xchallenge, which is also light and sturdy. Which is just how it should be. This visual delicacy fits into the Xchallenge design perfectly. - From 4 mm aluminium - Anodized aluminium, unpolished 049-0105 Large Luggage Rack G650 Xchallenge Now you can even take large luggage with you onto the trail. For anybody who wants to tour with the Xchallenge and luggage, we have designed this large luggage rack. Thanks to various mounting options, the luggage can be mounted on the luggage rack to meet your needs. At the same time it is exceptionally stable and light. - Support surface from 4 mm aluminium - Rugged steel tube construction, black powder coated - Anodized aluminium, unpolished 049-0104 Large Luggage Rack BMW G650 Xcountry Now you can even take large luggage with you onto the trail. For anybody who wants to tour with the Xcountry and luggage, we have designed this large luggage rack. Thanks to various mounting options, the luggage can be mounted on the luggage rack to meet your needs. At the same time it is exceptionally stable and light. - Support surface from 4 mm aluminium - Rugged steel tube construction, black powder coated - Anodized aluminium, unpolished 049-0310

Pannier Sytems BMW G650X 551 Aluminium Pannier System ZEGA Pro for BMW G 650 Xchallenge Zega with steel rack: Extremely sturdy case system. Perfectly suitable for trail and off-road use with specially adapted Zega cases, with 29 and 35 litres capacity, watertight and optionally lockable. The overall width of the case system installed ready for the road is only approx. 92 cm. So you can take all your luggage with you and still stay sporty and agile (no passenger). ZEGA Pro: 052-3161 (31/38 ltr VMT) ZEGA Pro *And-S*: 052-3162 (31/38 ltr VMT) ZEGA Pro *And-Black*: 052-3163 (31/38 ltr VMT) VMT: pre-assembled *And-S*: anodised aluminium case