Section: Page: 1 of 2 Date: March 30, 1996 SPECIFICATION DATA 200 SERIES MOTORIZED 203, 204, 205 and 220 MODELS PORT SIZES MODELS SUCTION DISCHARGE All dimensions are in inches. Specifications subject to change without notice. 20551,22051* 5/8 5/8 20352, 20452, 20552, 22052** 3/8 1/4 *Phenolic construction clamped hose connections **Stainless steel construction threaded connections (NPT) MATERIALS OF CONSTRUCTION MODELS COMPONENT 20551,22051* 20352, 20452 20552, 22052** Housing Rotor Stator Phenolic Phenolic Motor Data 1/8 HP, 1 PH, 115 VAC, 50/60 HZ, 1725 RPM Weight (Ibs) 10 13 316 SS 316 SS
Page 2 of 2 PERFORMANCE (Water at 70 F) P r i n t e d i n U. S. A. 3 M P P I 1 1 9 6 1999 by Moyno, Inc. Printed in U.S.A Moyno is a registered trademark of Moyno, Inc.
Section: Page 1 of 2 Date: March 30 1996 SPECIFICATION DATA 200 SERIES 203, 204, 205, 220, AND 232 MODELS DIMENSIONS PORT SIZES MODELS CP F 1 F 2 SUCTION DISCHARGE 20501, 22001 6 11/ 16 3 5 / 16 3 3 / 8 3 / 8 NPT 20302, 20402, 20502, 22002 7 1 / 16 3 11 / 16 3 3 / 8 3 / 8 NPT 23201, 23203 8 3 / 16 4 13 / 16 4 1 / 2 1 / 2 NPT 3 / 8 NPT 3 / 8 NPT 1 / 2 NPT All dimensions are in inches. Specifications subject to change without notice. MATERIALS OF CONSTRUCTION COMPONENT Housing Rotor Stator MODELS 20501, 22001 20302, 20402, 20502, 22002 23201 23203 Aluminum 316 SS Aluminum 316 SS Phenolic 316 SS 416 SS/CP* 316 SSICP* Weight (Ibs) 3 5 3 6 *CP =Chrome plated
Page 2 of 2 PERFORMANCE (Water at 70 F) 1999 by Moyno, Inc. Moyno is a registered trademark of Moyno, Inc. Printed in U.S.A.
Section: Page: 1 of 4 Date: March 30, 1996 SPECIFICATION DATA 300 SERIES MOTORIZED 331, 332, 333, 344, 356 AND 367 MODELS 331, 332, 333, 344 MODELS DIMENSIONS MATERIALS OF CONSTRUCTION COMPONENT 33159, 33259 33359, 34459 33160, 33260 33360, 34460 MODELS 33152, 33252 33352, 34452 33150, 33250 33350, 34450 Housing Cast iron Cast iron 316SS 316SS Rotor 416 SS/CP 416 SS/CP 316 SS/CP 316 SS/CP Stator 1/2 HP,1 PH 1/2 HP, 3 PH 1/2 HP, 1 PH 1/2 HP, 3 PH Motor Data 115/230 VAC 230/440 VAC 115/230 VAC 230/440 VAC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC Weight (Ibs) 41 41 41 41 CP = Chrome plated
Page 2 of 4 PERFORMANCE (Water at 70 F) NOTE: With the standard 1/2 HP motor, maximum fluid viscosity is 100 CP (500 SSU).
Page 3 of 4 356 AND 367 MODELS DIMENSIONS All dimensions are in inches. Specifications subject to change without notice. MATERIALS OF CONSTRUCTION COMPONENT MODELS 35651 36751 35650 35652 36750 36752 Housing Rotor Stator Cast iron 416 SS/CP Cast iron 416 SS/CP 316 SS 316 SS/CP 316 SS 316 SS/CP 316 SS 316 SS/CP 316 SS 316 SS/CP 1-1/2 HP, 3 PH 2 HP, 3 PH 1-1/2 HP, 3 PH 1-1/2 HP, 1 PH 2HP, 3 PH 2 HP, 1 PH Motor Data 208/230/440 VAC 230/440 VAC 230/460 VAC 115/230 VAC 230/460 VAC 115/230 VAC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC Weight (Ibs) 68 115 68 68 115 115 CP = Chrome plated
Page 4 of 4 PERFORMANCE (Water at 70 F) NOTE: With the standard 1 ½ HP (Model 35651) 2 HP (Model 36751) motor, maximum fluid viscosity is 100 CP (500 SSU). 1999 by Moyno, Inc. Printed in U.S.A. Moyno is a registered trademark of Moyno, Inc.
Section: Page:1 of 4 Date: March 30, 1996 SPECIFICATION DATA 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS MODELS CP A A 1 D E F F 1 H K L M N R U X Y 33101, 33201 33301, 33104 33204, 33304 12 5 / 8 3 1 / 8 4 3 / 4 2 3 / 4 1 1 13 / 16 6 15 / 16 13 / 32 3 1 / 32 5 11 / 16 6 1 / 16 1 7 / 16 5 / 8 2 3 / 8 1 1 / 4 3 / 4 3 / 4 34401, 34404 *34411 13 15 / 16 3 1 / 4 4 3 / 4 2 3 / 4 1 1 / 8 7 3 / 16 13 / 32 2 7 / 8 7 6 1 / 16 1 3 / 8 1 / 4 5 / 8 2 5 / 16 1 1 / 4 3 / 4 3 / 4 35601, 35604 17 1 / 2 6 1 / 2 7 9 / 16 4 9 / 32 1 3 / 4 2 10 19 /32 13 / 32 4 1 / 2 7 3 / 8 8 5 / 8 2 3 / 8 15 / 32 3 / 4 3 25 / 32 2 1 / 8 1 1 / 2 1 1 / 4 *35611, *35613 19 3 / 8 6 1 / 2 7 9 / 16 4 9 / 32 1 3 / 4 2 1 / 2 10 19 /32 / 32 4 9 11 / 32 8 5 / 8 2 13 / 9 32 / 3 16 / 4 3 25 / 32 2 1 / 8 1 1 / 2 1 1 / 4 36701, 36704 20 15 / 16 5 1 / 4 8 4 1 / 2 2 2 5 / 16 13 / 16 4 1 / 16 7 15 / 16 11 3 / 16 2 1 / 8 1 4 2 1 / 2 2 2 *Packing Gland Model SUCT (NPT) DISCH (NPT) All dimensions are in inches. Specifications subject to change without notice.
2 331, 332, 333 and 344 MODELS PERFORMANCE (water at 70ºF) NOTE: For fluids with viscosity over 200 CP (1000 SSU), pump capacity is reduced by 20%. MATERIALS OF CONSTRUCTION COMPONENT 33101, 33201 33301, 34401 Housing Rotor Stator Cast iron 416 SS/CP 33104, 33204 33304, 34404 316 SS 316 SS/CP MODELS 33108, 33208 33308, 34408 Nylon 416 SS/CP *34411 Cast iron 416 SS/CP Weight (Ibs) 16 16 8 16 * Packing Gland Model CP = Chrome plated
NOTE: For fluids with viscosity over 200 CP (1000 SSU), pump capacity is reduced by 20%. 3
356 and 367 MODELS PERFORMANCE (water at 70 F) NOTE: For fluids with viscosity over 200 CP (1,000 SSU), pump capacity is reduced by 20%. MATERIALS OF CONSTRUCTION COMPONENT Housing Rotor Stator MODELS 35601, 35611 35604, 35613 36701 36704 Cast iron 316 SS Cast iron 316 SS 416 SS/CP 316 SS/CP 416 SS/CP 316 SS/CP Weight (Ibs) 37 40 37 40 54 54 CP=Chrome plated 1999 by Moyno, Inc. Moyno is a registered trademark of Moyno, Inc. Printed in U.S.A.
SPECIFICATION DATA 300 SERIES MODELS 30100, 30102, 30104, 30105 Section: Page: 1 of 2 Date: November 1, 1994 All dimensions are in inches. Specifications subject to change without notice. MATERIALS OF CONSTRUCTION COMPONENT Housing Rotor Stator MODELS 30100, 30102 30104 30105 Phenolic Phenolic *NBR Phenolic Phenolic *EPDM Weight (Ibs) 7 7 7 *NBR = Nitrile EPDM = Ethylene-Propylene-Diene Terpolymer FPM = Fluoroelastomer Phenolic Phenolic *FPM
Page 2 of 2 PERFORMANCE (Water at 70 F) NOTE:For fluids with viscosity over 200 CP (1000 SSU), pump capacity is reduced by 20%. 1999 by Moyno, Inc. Moyno is a registered trademark of Moyno, Inc. Printed in U.S.A.
Section: Page: 1 of 2 Date: November 1, 1994 SPECIFICATION DATA 400 SERIES GRINDER PUMPS 415, 422, 433, AND 444 MODELS PERFORMANCE (1 HP, 1725 RPM, water at 70 F) DISCHARGE CAPACITY IN GAL. PER MIN. HEAD PRESSURE BY MODEL NUMBER IN FEET (PSIG) 41502 42202 43302 44402 0 0 1.95 5.1 9.2 14.6 10 4.3 1.90 5.0 9.0 14.4 20 8.7 1.85 4.8 8.5 14.0 30 13.0 1.80 4.5 8.1 13.4 40 17.3 1.76 4.4 7.7 13.0 50 21.7 1.70 4.2 7.2 12.4 60 26.0 1.67 4.0 6.8 12.0 70 30.3 1.64 3.9 6.4 11.4 80 34.6 1.60 3.8 6.0 10.8 NPSHR Ft. 1.2 1.9 2.6 4.1 NOTE: In application other than sewage, maximum fluid viscosity cannot exceed 100 CP (500 SSU). MATERIALS OF CONSTRUCTION Housing... Cast iron Rotor... 416 Stainless steel Stator... WEIGHT: Pump only...50 lbs. Pump with motor...90 lbs. (Approx.)
Page 2 of 2 400 SERIES GRINDER PUMPS 1999 by Moyno, Inc. Printed in U.S.A. Moyno is a registered trademark of Moyno, Inc.
Section: Page: 1 of 4 Date: November 1, 1994 SPECIFICATION DATA 603, 610, 622, 633, AND 655 MODELS 600 SERIES MODELS CP E 1 F F, F 2 M R SUCT. DISCH. WEIGHT (NPT) (NPT) (LBS.) 60301 24 25 / 32 1 9 / 16 15 1 / 4 5 1 / 32 15 5 1 / 4 3 / 4 1 / 2 30 *60311 28 5 / l6 1 9 / 16 18 25 /32 5 1 / 32 15 8 15 / 32 3 / 4 1 / 2 38 61001 32 3 / 8 1 9 / 16 22 3 / 4 5 1 / 8 22 5 / 8 5 1 / 4 3 / 4 3 / 4 32 *61011 35 29 / 32 1 9 / 16 22 3 / 4 8 11 / 16 22 5 / 8 8 15 / 32 3 / 4 3 / 4 40 62201 37 5 / 8 1 9 / 16 22 3 / 4 10 3 / 8 10 1 / 4 27 7 / 8 5 1 / 4 3 / 4 3 / 4 32 *62211 41 5 / 32 1 9 / 16 22 11 / 16 14 7 11 / 16 27 7 / 8 8 15 / 32 3 / 4 3 / 4 40 63301 27 9 / 16 2 1 / 8 14 3 / 4 8 5 / 16 17 7 / 8 5 1 / 4 1 1 / 4 1 1 / 4 40 *63311 31 23 / 32 2 1 / 8 22 1 / 4 4 31 / 32 17 7 / 8 8 15 / 32 1 1 / 4 1 1 / 4 48 65501 27 13 / 16 2 1 / 8 14 3 / 4 8 9 / 16 18 1 / 16 5 1 / 4 1 1 / 4 1 1 / 4 38 *65511 31 11 / 32 2 1 / 8 22 1 / 4 4 19 / 32 18 1 / 16 8 15 / 32 1 1 / 4 1 1 / 4 46 *Packing Gland Models. All dimensions are in inches. Specifications subject to change without notice.
Page 2 of 4 PERFORMANCE (water at 70 F) MATERIALS OF CONSTRUCTION COMPONENT ALL MODELS Housing Rotor Stator CP = Chrome plated Cast iron 416 SS/CP
PERFORMANCE (water at 70 F) (CONT) Page 3 of 4
Page 4 of 4 PERFORMANCE (Water at 70 F) (CONT) 1999 by Moyno, Inc. Printed in U.S.A. Moyno is a registered trademark of Moyno, Inc.
Section: Moyno 500 PUMPS Page: 1 of 2 Date: September 30, 1996 SPECIFICATION DATA SANITARY/HYGIENIC MOTORIZED 331, 332, 333 AND 344 MODELS DIMENSIONS SUCTION: 1.0 (INCH) STD SANITARY CLAMP-STYLE FITTING 4 X.34 SLOTS 10.26±.25 DEPENDENT ON DRIVE SELECTION 7.43±.12 DISCHARGE: 1.0 (INCH) STD SANITARY CLAMP-STYLE FITTING 7.00 3.50 2.44 4.88 2.56.62.09 3.00 6.56 3.28 4.25 MATERIALS OF CONSTRUCTION SANITARY MODELS HYGIENIC MODELS COMPONENT 33116, 33216 33316, 34416 33126, 33226 33326, 34426 33117, 33217 33317, 34417 33127, 33227 33327, 34427 Housings 316 SS#4 Finish 316 SS#4 Finish 316 SS (Not Polished) 316 SS (Not Polished) Rotor 316 SS/CP 316 SS/CP 316 SS/CP 316 SS/CP Stator Nitrile (FDA Food Grade) Nitrile (FDA Food Grade) NBR (Nitrile STD.) NBR (Nitrile STD.) Motor Data 1/2 HP,1 PH 1/2 HP, 90V 1/2 HP, 1 PH 1/2 HP, 90V 115/230 VAC DC, TENV 115/230 VAC DC, TENV 60 HZ TEFC Washdown Duty 60 HZ TEFC Washdown Duty Weight (lbs) 41 41 41 41 CP=Chrome plated All dimensions are in inches. Specifications subject to change without notice.
Page 2 of 2 331, 332, 333 and 344 MODELS PERFORMANCE (Water at 70 F) NOTE: With the standard 1/2 HP motor, maximum fluid viscosity is 100 CP (500 SSU). 1996 by Moyno, Inc. Moyno is a registered trademark of Moyno, Inc. Moyno, Inc. is a Unit of Robbins & Myers, Inc.
Section: Page: 1 of 2 Date: September 30, 1996 SPECIFICATION DATA SANITARY/HYGIENIC NON-MOTORIZED 331, 332, 333 AND 344 MODELS DIMENSIONS.62 SUCTION: 1.0 (INCH) STD SANITARY CLAMP-STYLE FITTING 13.63±.25 7.43±.12 DISCHARGE: 1.0 (INCH) STD SANITARY CLAMP-STYLE FITTING 1.13 7.00 3.50 1.41 2.00.18 1.81 1.38 4.25 4.00 2.00 3 X Ø.41 3.88 MATERIALS OF CONSTRUCTION COMPONENT SANITARY MODELS 33106, 33206 33306, 34406 HYGIENIC MODELS 33107, 33207 33307, 34407 Housings 316 SS/#4 Finish 316 SS (Not Polished) Rotor 316 SS/CP 316 SS/CP *Stator Nitrile (FDA Food Grade) Nitrile (STD. NBR) Weight (lbs) 16 16 CP=Chrome plated *Other Materials Available All dimensions are in inches. Specifications subject to change without notice.
Page 2 of 2 331, 332, 333 and 344 MODELS PERFORMANCE (Water at 70 F).4 331 MODELS Minimum Starting Torque 15 in.-lbs..5.4 332 MODELS Minimum Starting Torque 15 in.-lbs. 100 PSI.3.2.1 Horsepower Discharge Pressures 150 PSI 100 PSI 50 PSI 0 PSI.3.2.1 Horsepower Discharge Pressures 50 PSI 0 PSI 0 PSI 0 1.75 0 PSI 0 3.5 1.5 1.25 1.0.75 Capacity GPM Discharge Pressures 50 PSI 100 PSI 3.0 2.5 2.0 1.5 Capacity GPM Discharge Pressures 50 PSI 100 PSI.5 150 PSI 1 2.25 NPSHR Ft. 0 0 400 800 1200 1800 RPM 20,000 5000 1000 300 10,000 2,000 500 100 VISCOSITY HEAVY MEDIUM LIGHT ABRASION 1.5 NPSHR Ft. 0 0 400 800 1200 1800 RPM 20,000 5000 1000 300 10,000 2000 500 100 VISCOSITY HEAVY MEDIUM LIGHT ABRASION 1.4 333 MODELS Minimum Starting Torque 15 in.-lbs. 50 PSI.6.5 344 MODELS* Minimum Starting Torque 15 in.-lbs. 40 PSI.3.2.1 0 Horsepower Discharge Pressures 25 PSI 0 PSI.4.3.2.1 Horsepower Discharge Pressures 25 PSI 0 PSI 10.5 0 0 PSI 9.0 7.5 6.0 4.5 3.0 Capacity GPM Discharge Pressures 0 PSI 25 PSI 50 PSI 4 12 10 8 6 4 Capacity GPM Discharge Pressures 25 PSI 40 PSI 4 1.5 2 NPSHR Ft. 0 0 400 800 1200 1800 RPM 20,000 5000 10,000 2000 1000 VISCOSITY 500 300 100 HEAVY MEDIUM LIGHT ABRASION 2 NPSHR Ft. 0 0 400 800 1200 1800 RPM 20,000 5000 10,000 2000 1000 VISCOSITY 500 300 100 HEAVY MEDIUM LIGHT ABRASION 2 NOTE: For fluids with viscosity over 200 CP (1000 SSU), pump capacity is reduced by 20%. *Max. 30 PSI with.5 HP motor. Consult factory for larger motors. 1996 by Moyno, Inc. Moyno is a registered trademark of Moyno, Inc.