Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com
Machine dimensions 2217 227 1487 max. 450 877 707 1100 580 2038 625 2400 4) 1157 438 239 6204 1) 6604 2) 7154 3) 6370 1) 7188 2) 7716 3) 2030 Electrical connection Cooling water connection 1) Injection unit 800 2) Injection unit 1300 3) Injection unit 2100 4) Depending on the performance and size of the injection unit 2
Technical data Clamping unit with clamping force max. kn 0 230 0 250 0 0 Opening force stroke max. kn mm --- 550 --- 550 Mould height, fixed variable min.-max. mm --- 200-650 --- 300-750 Platen daylight fixed variable max. mm --- 750-1200 --- 850-1300 Distance between tie bars (w x h) mm 630 x 630 630 x 630 Mould mounting platens (w x h) max. mm 900 x 900 900 x 900 Weight of movable mould half max. kg 2100 2100 0 Ejector force stroke max. kn mm 86 225 86 225 Dry cycle time EUROMAP ² Version L1 min. s - mm 0-0 2-441 Version L2 min. s - mm 0-0 1,4-441 Version L3 min. s - mm 1,4-441 0-0 Injection unit with screw diameter mm 45 800 50 55 55 1300 60 70 60 2100 70 80 Effective screw length L/D 22 20 18 22 20 17 23 20 17,5 Screw stroke max. mm 200 240 280 Calculated stroke volume max. cm³ 318 392 474 570 678 923 792 1078 1407 Shot weight max. g PS 291 359 434 521 620 844 723 984 1286 Material throughput max. kg/h PS 46 53 59 86 96 115 125 145 175 max. kg/h PA6.6 23 27 30 43 48 58 62 74 88 Injection pressure max. bar 2470 2000 1650 2380 2000 1470 2500 2000 1530 Holding pressure max. bar 1980 1600 1320 1900 1600 1170 2180 1600 1220 Injection flow ² Version L1 max. cm³/s 175 216 261 261 311 423 340 463 604 Version L2 max. cm³/s 318 394 476 476 566 772 708 964 1258 Version L3 max. cm³/s 477 589 712 --- --- --- 848 1154 1508 Screw circumferential speed ² max. m/min 54 60 66 55 60 70 51 60 69 Screw torque max. Nm 900 1000 1100 1510 1640 1920 2140 2500 2850 Nozzle contact force retraction stroke max. kn mm 70 400 90 500 110 600 Heating capacity zones kw 19,9 8 22,9 8 31,4 8 Drive and connection with injection unit 800 Version L1 1300 2100 800 Version L2 1300 2100 800 Variante L3 0 2100 Net weight of machine kg 12500 13700 14900 12900 14100 15300 1370 16100 Sound press. level Insecurity ⁴ db(a) 60 3 60 3 60 3 Electrical connection ³ kw 51 67 91 56 72 97 56 0 97 Total A 160 --- --- 160 --- --- 125 0 --- Machine A 100 160 200 125 160 225 10 160 Heating A 35 35 50 35 35 50 35 0 50 Cooling water connection max. C min. Δp bar 30 1,5 DN 25 30 1,5 DN 25 30 1,5 DN 25 Machine type with EUROMAP size designation ¹ Drive 2500-800 1300 2100 L1 L2-2300-800 2100 - - L3 0 Upon request: other machine types and mould installation heights, screws, drive powers etc. All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive. 1) Clamping force (kn) - large injection unit = max. stroke volume (cm³) x max. injection pressure (kbar) 2) Specifications depend on the drive variant / drive configuration. 3) Specifications relate to 400 V/50 Hz. 4) Emission sound pressure level at the workplace. Detailed information in the operating instructions. [ ] Specifications apply to alternative equipment. 3
Mold installation dimensions, variant L1 / L2 448 3) C Stroke max. 225 427-1 X Ø160H7 Y 43.5 Ø45-0.1 Ø 37 30 Ø45 Ø82 Ø64 Ø43 40 Ø125 1) Ø145 2) Ø70 1) Ø75 2) 480 485 a max. Injection unit 800 1300 / 2100 50 60 Stroke max. 550 D B A a max. 850-1300 Ejector bolt X Bore in mould (if required) Y 3 15-0.1 21 10 20 1) 15 2) Injection unit 800 1) and 1300 2) in thermoset version - Injection unit 2100 available on request Closing force for spring moulds / during injection compression moulding* Closing force [kn] 101.6 3) Ejector plate D 406.4 Robotic system mounting C 97.5 M8-16 deep 100 32.5 Mould stroke [mm] * automatic locking force adjustment up to 20 kn M16-31 deep 35 3) Ejector plate position Optional: Reinforced mounting platen (see variant 3) 175 4
Mold installation dimensions, variant L1 / L2 Fixed mould mounting platen A 1140 550 700 420 280 1035 Ø160H7 280 Bores for ARBURG mechanical mould rapid clamping system 420 700 1100 Moving mould mounting platen B Ø31 Ø105 735 630 949 630 735 946 744 1028 5
Mold installation dimensions, variant L3 Stroke max. 225 500-1 C 485-1 1) X 100H7 Y 480 485 a max. Injection unit 800 2100 0 10 D Stroke max. 550 A B a max. 750-1200 Ejector bolt X Bore in mould (if required) Y Ø45-0,1 43,5 Ø37 Ø45 Ø43 90 3 30 15-0,1 21 Thermoset version available on request Ejector plate D Befestigung Robot-System C 406,4 177,8 M8-16 deep 101,6 1) 101,6 147,5 82,5 100 406,4 1) 177,8 1) 85 225 1) Ejector plate position 6
Mold installation dimensions, variant L3 Fixed mould mounting platen A 1140 550 700 420 280 1035 280 420 700 735 630 949 Ø160H7 Bores for ARBURG mechanical mould rapid clamping system Moving mould mounting platen B Ø27 1) Ø105 630 735 946 744 1028 1) Guide 7
Shot weights Theoretical shot weights for the most important injection moulding materials Injection units according to EUROMAP 800 1300 2100 Screw diameter Polystyrene Styrene heteropolymerizates mm max. g PS max. g SB max. g SAN, ABS 1) 45 50 55 291 359 434 284 350 424 278 344 416 55 60 70 521 620 844 509 606 824 499 594 808 60 70 80 723 984 1286 707 962 1256 693 943 1231 Cellulose acetate max. g CA 1) 327 404 488 586 698 949 814 1108 1447 Celluloseacetobutyrate max. g CAB 1) 304 375 454 545 649 883 757 1030 1346 Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 PA 6 1) max. g PA 6.10 PA 11 1) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE 1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P 1) 300 371 449 270 333 403 305 377 456 316 390 471 289 357 431 270 333 403 359 443 536 346 427 517 219 271 328 227 280 339 232 286 346 465 574 695 408 504 609 351 434 525 324 401 485 538 641 872 484 575 783 547 651 887 566 673 916 517 616 838 473 575 783 643 765 1042 620 738 1005 393 468 637 406 483 658 415 494 672 834 992 1350 731 870 1185 629 749 1020 582 692 942 747 1017 1329 671 914 1194 760 1034 1351 785 1069 1396 719 978 1278 671 914 1194 893 1215 1588 861 1172 1531 546 744 971 564 768 1003 576 784 1025 1157 1575 2058 1015 1382 1805 874 1190 1554 808 1099 1436 1) average value ARBURG GmbH + Co KG Arthur-Hehl-Strasse 72290 Lossburg Tel.: +49 7446 33-0 www.arburg.com contact@arburg.com With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, Spain, Czech Republic, Turkey, Hungary Asia: People s Republic of China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates America: Brazil, Mexico, USA For more information, please go to www.arburg.com. 2018 ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilisation, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG. All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine. ARBURG GmbH + Co KG DIN EN ISO 9001 + 14001 + 50001 certified 680760_EN_GB_032018 Subject to alterations