1121G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F2CFE614F Tier 4 Final SCR/DOC 4-stroke, turbocharged and air-to-air cooler 6-cylinder in-line 4.61 x 5.31 in (177 x 135 mm) Displacement 531 in 3 (8.7 L) Fuel Fuel injection Fuel filter #2 Diesel, #1 and #2 mixture permitted for cold temperatures Direct injection electronic Replaceable, full flow spin-on cartridge Fuel pump Bosch CP 3.3 Gradeability: Side-to-side 35 Fore and aft 35 Air filter 2-element dry type w/ warning restriction indicator Rear-mount cooling module: Rear-mount air/water Fan hydraulic driven: Style Diameter Water pump 9 blade puller 36 in (914 mm) Integral Engine oil pump operating angle ratings: Side-to-side 35 Fore and aft 35 Oil filtration Replaceable, full flow spin-on cartridge Engine speeds RPM Rated full load 2100 Horsepower: Maximum Power Mode: Peak gross @ 1800 RPM Net rated @ 2100 RPM Peak net @ 1800 RPM Standard Power Mode: Peak gross @ 1700 RPM Net rated @ 2100 RPM Peak net @ 1700 RPM Economy Power Mode: Peak gross @ 1400 RPM Net rated @ 1800 RPM Peak net @ 1400 RPM 347 hp (259 kw) 284 hp (212 kw) 320 hp (239 kw) 322 hp (240 kw) 262 hp (195 kw) 300 hp (223 kw) 279 hp (208 kw) 218 hp (163 kw) 266 hp (199 kw) Torque peak: Maximum Power Mode: Gross @ 1100 RPM 1,183 lb ft (1 604 N m) Net @ 1100 RPM 1,154 lb ft (1 564 N m) Standard Power Mode: Gross @ 1400 RPM 1,143 lb ft (1 550 N m) Net @ 1400 RPM 1,096 lb ft (1 485 N m) Economy Power Mode: Gross @ 1300 RPM 1,088 lb ft (1 475 N m) Net @ 1300 RPM 1,047 lb ft (1 419 N m) Torque rise: Maximum power range 50% NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349. DRIVETRAIN Transmission: 4F/3R Proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation Gears Helical cut Torque converter: Stall ratio 2.51:1 Differential: Auto locking Front Differential Open Differential Rear Rear axle oscillation 26 total Front and rear axles: Differential ratio 4.25 Planetary ratio 6.35 Final axle ratio 27.00 Special application axles standard: Front axle equipped w/ locking differential Rear axle equipped w/ open differential Planetaries Outboard Service brakes: Hydraulically actuated, maintenance-free, multiple wet disc w/ accumulator to all four wheels Brake surface area: Front hub each 1,144 in 2 (0.738 m 2 ) Rear hub each 1,144 in 2 (0.738 m 2 ) Parking brakes: Spring-applied hydraulic release disc on transmission output shaft neutralizes power flow to wheels when engaged Travel speeds 4-speed transmission: Forward Reverse mph (kph) mph (kph) 1st 4.3 (6.9) 4.3 (6.9) 2nd 7.2 (11.6) 7.2 (11.6) 3rd 11.0 (17.7) 15.8 (25.5) 4th 23.2 (37.4) NOTE: Travel speeds at full engine throttle w/ 26.5 x 25 L3 Radial tires. ELECTRICAL Voltage Alternator Batteries (2) OPERATOR ENVIRONMENT 24 Volts, negative ground 120 amp 12-volt ROPS cab AC w/ heat; Key start; Articulated power steering w/ tilt column; Fully adjustable, suspension seat; Foot throttle; Single lever loader control w/ fully adjustable wrist rest, 2 cup holders; 2 interior rear view mirrors; 2-inch (51 mm) retractable seat belt; Multiple storage trays; Single brake pedal; F/N/R shuttle switch; External rearview mirrors; Pressurized air filtering; Anti-glare window strip; Front and Rear Defroster; Side window, partial/fully open; 2 Dome lights; Wipers, rear and intermittent front; Windshield washers, front and rear; Rubber floor mat; Horn. Dispays/Gauges: Digital: Transmission oil temperature; Engine coolant temperature; Fuel level; DEF level. LCD screen: Hour meter; Time; FNR indication; Trip computer; Metric/english; Differential lock*; Engine speed; Automatic trans indication; DeClutch indication; Fuel consumption; Engine diagnostics; Error reporting; Travel speed; Current gear selection; Engine mode indication; Multiple languages; Transmission diagnostics. Audible/Visual alarms: Warning lights: Four-way flashers; High beam lights; Grid heater*; Low brake pressure; Parking brake. Caution warnings: Parking brake; Coolant temperature; Hydraulic oil temperature; Transmission oil temperature; Air filter; Transmission filter; Hydraulic filter; Alternator; Low fuel. Critical warnings: Engine oil pressure; Brake pressure; Steering pressure w/ aux. steering*; Coolant temperature; Hydraulic oil temperature; Transmission oil temperature. Backup alarm Maintenance reminders: Cab air filter; Engine oil filter; Fuel pre-filter; DEF tank vent filter; SCR supply filter; Hydraulic oil and filter; Engine air filter; Engine coolant drive belt; Cab recirculation filter; Engine breather filter; Transmission breather; Front and rear axle fluid; SCR supply module filter. NOTE: *If equipped w/ option. 1 of 7
OPERATING WEIGHT Z-Bar Unit equipped w/ ROPS cab w/ heater and A/C; Standard counterweight; 26.5-R25 L3 Radial Tires; 6.25 yd 3 (4.8 m 3 ) GP pin-on w/ bolt on edge; Full fuel; 165 lb (75 kg) operator: 61,650 lb (27 964 kg) XR Unit equipped w/ ROPS cab w/ heater and A/C; Standard counterweight; 26.5-R25 L3 Radial Tires; 6.25 yd 3 (4.8 m 3 ) HD pin-on w/ bolt on edge; Full fuel; 165 lb (75 kg) operator: 63,443 lb (28 777 kg) HYDRAULICS Main pumps steering/implement: Closed center pressure/flow compensated Tandem variable displacement load-sensing Max rated flow x2: 50.2 gpm @ 2000 RPM (190 L/min @ 2000 RPM) Loader control valve: Closed-center, sectional 2, 3 or 4-function w/ control for lift, tilt and auxiliary hydraulics Loader auxiliary steering: Hydraulic orbital center-pivot articulating w/ on-demand oil flow High pressure standby: Implement Steering 3,650 psi (25 165 kpa) 3,495 psi (24 097 kpa) Filtration: Filtered vent w/ relief on hydraulic reservoir, maintains 3-5 psi on reservoir, 10-micron, return filter furnishes only clean oil to all components of the system SERVICE CAPACITIES Fuel tank 125 gal (473.0 L) DEF tank Diesel Exhaust Fluid: Usable capacity 16 gal (61.0 L) Total 24 gal (90.8 L) Hydraulic system: Reservoir 35 gal (134.0 L) Total 66 gal (250.0 L) Transmission: Service w/ filter 12 gal (45.4 L) Front and rear axle: Front axle 68 qt (64.0 L) Rear axle 68 qt (64.0 L) Engine oil w/ filter 30 qt (28.5 L) Cooling system 15 gal (56.8 L) OTHER SPECIFICATIONS Lift cylinder: Bore diameter Rod diameter Stroke Dump cylinder: Bore diameter Rod diameter Stroke 7.00 in (177.8 mm) 4.50 in (114.3 mm) 34.48 in (875.8 mm) 8.00 in (203.2 mm) 5.00 in (127.0 mm) 27.35 in (694.7 mm) Loader: Z-Bar loader linkage; Single control for lift and tilt; Positive hold float; Automatic return-to-dig; Automatic height control; Automatic return-to-travel; Brake pedal transmission disconnect; Bucket position indicator on bucket. Cycle time: Raise w/ rated bucket load Dump w/ rated bucket load Float down Sound level in Cab (LpA) Exterior sound level (LwA) NOTE: Sound level data tested in accordance with ISO6395, 6396, 3744. 6.5 sec 1.4 sec 2.8 sec 69 db(a) 104 db(a) 1121G 2 of 7
J E A D K H F C B G L Line drawings are for illustrative purpose only and may not be exact representation of unit. DIMENSIONS A. Height to top of ROPS cab 140.8 in (3 576 mm) Height to drawbar 44.8 in (1 137 mm) B. Wheelbase 139.8 in (3 550 mm) C. Ground clearance 17.2 in (437 mm) D. Angle of departure, rear 23 Width: Overall* without bucket Centerline tread Turning radius* outside 117.2 in (2 978 mm) 90.6 in (2 300 mm) 250.6 in (6 366 mm) Turning angle: From center 40 Total angle 80 Rear axle oscillation total 26 NOTE: *Dimensions taken with 26.5-R25 L3 Radial Tires. Additional dimensions on pages 4 through 5. WEIGHT ADJUSTMENTS Tipping Load Tipping Load Weight Adjustment Adjustment Select Options Adjustment Straight: Deflected* 40 Turn: Deflected* 26.5 x 25 L5 Radial Tires +1,500 lb (+680 kg) +1,323 lb (+600 kg) +1,226 lb (+556 kg) NOTE: Unit equipped with Z-Bar loader arms, 6.25 yd³ (4.8 m³) pin on bucket w/ bolt-on edge, 26.5-R25 L3 Radial Tires, ROPS cab with heater and A/C, full counterweight, front and rear fenders, full fuel and 165 lb (75 kg) operator. Adjust select options from rated weight. *Tipping loads: ISO 14397-1 Deflected Tires. 1121G 3 of 7
PERFORMANCE SPECS 1121G Z-Bar* 5.25 yd 3 (4.0 m 3 ) Bucket 5.1 yd 3 (3.9 m 3 ) Bucket 6.25 yd 3 (4.8 m 3 ) Bucket with Bolt-on Edge - Pin On with Teeth - Pin On with Bolt-on Edge - Pin On Operating weight 61,288 lb (27 800 kg) 61,284 lb (27 798 kg) 61,650 lb (27 964 kg) E. Operating height fully raised with spillguard 235.8 in (5 988 mm) 235.8 in (5 988 mm) 242.0 in (6 147 mm) F. Hinge pin height fully raised 175.2 in (4 450 mm) 175.2 in (4 450 mm) 175.2 in (4 449 mm) G. Overall length bucket level on ground 355.1 in (9 020 mm) 362.3 in (9 202 mm) 361.1 in (9 172 mm) Dump angle fully raised 50 50 50 H. Dump height fully raised, 45 dump 130.2 in (3 306 mm) 125.5 in (3 188 mm) 126.3 in (3 209 mm) J. Bucket reach fully raised, 45 dump 45.5 in (1 156 mm) 50.8 in (1 290 mm) 50.1 in (1 273 mm) K. Bucket reach 7 ft 0 in (2.13 m) height, 45 dump 77.5 in (1 967 mm) 80.8 in (2 051 mm) 80.4 in (2 043 mm) L. Dig depth 4.4 in (111 mm) 4.6 in (116 mm) 4.4 in (111 mm) Operating load ISO Deflected Tires 19,470 lb (8 832 kg) 19,594 lb (8 888 kg) 19,227 lb (8 721 kg) Maximum material density ISO Deflected Tires 3,709 lb/yd 3 (2 201 kg/m 3 ) 3,842 lb/yd 3 (2 280 kg/m 3 ) 3,076 lb/yd 3 (1 825 kg/m 3 ) Straight 49,094 lb (22 269 kg) 49,413 lb (22 413 kg) 48,670 lb (22 076 kg) 40 turn 38,940 lb (17 663 kg) 39,191 lb (17 777 kg) 38,454 lb (17 443 kg) Full height 33,076 lb (15 003 kg) 33,024 lb (14 979 kg) 32,710 lb (14 837 kg) Ground 58,279 lb (26 435 kg) 58,807 lb (26 674 kg) 56,904 lb (25 811 kg) Breakout force with tilt cylinder 56,245 lb (25 512 kg) 60,336 lb (27 368 kg) 49,934 lb (22 650 kg) Loader clearance circle 561.1 in (14 253 mm) 566.2 in (14 381 mm) 564.4 in (14 337 mm) 1121G XR 5.25 yd 3 (4.0 m 3 ) Bucket 5.1 yd 3 (3.9 m 3 ) Bucket 6.25 yd 3 (4.8 m 3 ) Bucket with Bolt-on Edge - Pin On with Teeth - Pin On with Bolt-on Edge - Pin On Operating weight 63,082 lb (28 613 kg) 63,078 lb (28 611 kg) 63,443 lb (28 777 kg) E. Operating height fully raised with spillguard 252.2 in (6 406 mm) 252.2 in (6 406 mm) 258.4 in (6 564 mm) F. Hinge pin height fully raised 191.6 in (4 867 mm) 191.6 in (4 867 mm) 191.6 in (4 867 mm) G. Overall length bucket level on ground 371.2 in (9 428 mm) 378.3 in (9 609 mm) 377.2 in (9 580 mm) Dump angle fully raised 50 50 50 H. Dump height fully raised, 45 dump 146.6 in (3 724 mm) 141.9 in (3 606 mm) 142.8 in (3 626 mm) J. Bucket reach fully raised, 45 dump 47.2 in (1 199 mm) 52.5 in (1 333 mm) 51.8 in (1 315 mm) K. Bucket reach 7 ft 0 in (2.13 m) height, 45 dump 92.0 in (2 338 mm) 95.5 in (2 427 mm) 95.2 in (2 417 mm) L. Dig depth 4.4 in (111 mm) 4.6 in (116 mm) 4.4 in (111 mm) Operating load ISO Deflected Tires 17,469 lb (7 924 kg) 17,574 lb (7 971 kg) 17,204 lb (7 804 kg) Maximum material density ISO Deflected Tires 3,327 lb/yd 3 (1 974 kg/m 3 ) 3,446 lb/yd 3 (2 045 kg/m 3 ) 2,753 lb/yd 3 (1 633 kg/m 3 ) Straight 43,233 lb (19 610 kg) 43,506 lb (19 734 kg) 42,640 lb (19 341 kg) 40 turn 34,938 lb (15 848 kg) 35,148 lb (15 943 kg) 34,408 lb (15 607 kg) Full height 31,599 lb (14 333 kg) 31,564 lb (14 317 kg) 31,251 lb (14 175 kg) Ground 48,983 lb (22 218 kg) 49,384 lb (22 400 kg) 47,783 lb (21 674 kg) Breakout force with tilt cylinder 56,776 lb (25 753 kg) 60,916 lb (27 631 kg) 50,409 lb (22 865 kg) Loader clearance circle 577.2 in (14 660 mm) 582.7 in (14 801 mm) 580.9 in (14 756 mm) 1121G Z-Bar/XR Z-Bar/XR Z-Bar/XR Maximum rollback: Ground 44 /42 44 /42 44 /42 Carry position 49 /48 49 /48 49 /48 @ Full height 65 /66 65 /66 65 /66 Maximum grading angle with bucket back dragging 60 /63 60 /62 60 /62 SAE bucket capacity struck 4.53 yd 3 (3.46 m 3 ) 4.33 yd 3 (3.31 m 3 ) 5.45 yd 3 (4.17 m 3 ) Heaped 5.25 yd 3 (4.01 m 3 ) 5.10 yd 3 (3.90 m 3 ) 6.25 yd 3 (4.78 m 3 ) Bucket width outside 125.8 in (3 195 mm) 126.9 in (3 223 mm) 125.8 in (3 195 mm) Bucket weight 4,580 lb (2 077 kg) 4,575 lb (2 075 kg) 4,941 lb (2 241 kg) 1121G 4 of 7
PERFORMANCE SPECS 1121G Z-Bar* 6.1 yd 3 (4.7 m 3 ) Bucket with Teeth - Pin On Operating weight 61,646 lb (27 962 kg) E. Operating height fully raised with spillguard 242.0 in (6 147 mm) F. Hinge pin height fully raised 175.2 in (4 449 mm) G. Overall length bucket level on ground 368.3 in (9 354 mm) Dump angle fully raised 50 H. Dump height fully raised, 45 dump 121.7 in (3 090 mm) J. Bucket reach fully raised, 45 dump 55.4 in (1 406 mm) K. Bucket reach 7 ft 0 in (2.13 m) height, 45 dump 83.5 in (2 121 mm) L. Dig depth 4.6 in (116 mm) Operating load ISO Deflected Tires 19,345 lb (8 775 kg) Maximum material density ISO Deflected Tires 3,171 lb/yd 3 (1 882 kg/m 3 ) Straight 48,973 lb (22 214 kg) 40 turn 38,691 lb (17 550 kg) Full height 32,662 lb (14 815 kg) Ground 57,397 lb (26 035 kg) Breakout force with tilt cylinder 53,151 lb (24 109 kg) Loader clearance circle 569.6 in (14 467 mm) 1121G XR 6.1 yd 3 (4.7 m 3 ) Bucket with Teeth - Pin On Operating weight 63,439 lb (28 776 kg) E. Operating height fully raised with spillguard 258.4 in (6 564 mm) F. Hinge pin height fully raised 191.6 in (4 867 mm) G. Overall length bucket level on ground 384.3 in (9 761 mm) Dump angle fully raised 50 H. Dump height fully raised, 45 dump 138.1 in (3 508 mm) J. Bucket reach fully raised, 45 dump 57.1 in (1 449 mm) K. Bucket reach 7 ft 0 in (2.13 m) height, 45 dump 98.5 in (2 502 mm) L. Dig depth 4.6 in (116 mm) Operating load ISO Deflected Tires 17,303 lb (7 848 kg) Maximum material density ISO Deflected Tires 2,837 lb/yd³ (1 683 kg/m³) Straight 42,899 lb (19 459 kg) 40 turn 34,606 lb (15 697 kg) Full height 31,218 lb (14 160 kg) Ground 48,157 lb (21 844 kg) Breakout force with tilt cylinder 53,667 lb (24 343 kg) Loader clearance circle 586.6 in (14 900 mm) 1121G Z-Bar/XR Maximum rollback: Ground 45 /42 Carry position 49 /48 @ Full height 65 /66 Maximum grading angle with bucket back dragging 60 /62 SAE bucket capacity struck 5.25 yd 3 (4.01 m 3 ) Heaped 6.10 yd 3 (4.66 m 3 ) Bucket width outside 126.9 in (3 223 mm) Bucket weight 4,937 lb (2 240 kg) NOTE: *Z-Bar performance data shown w/ standard counterweight. Performance data unit equipped with 26.5-R25 L3 Radial tires, ROPS cab w/ heater and A/C, standard counterweight, full fuel and 165 lb (75 kg) operator. Specifications per SAE J732, J1234, J695, J742, and J818. 1121G 5 of 7
STANDARD EQUIPMENT OPERATOR ENVIRONMENT See page 1 ENGINE Case/ FPT F2CFE614F Tier 4 Final Certified Selective Catalytic Reduction (SCR) with Diesel Oxidation Catalyst Selectable work modes: Maximum power Auto power Standard power Economy power Automatic shutdown idle reduction device Turbocharger Charge air cooling Automatic fan belt tensioner Integral engine oil cooling Fuel filter with water trap Dual-element dry-type air cleaner Hydraulic-driven cooling fan Air-cooled radiator Rear-mounted cooling module Common rail electronic fuel injection LOADER See page 2 Operating weight, Other specifications DRIVETRAIN 4-wheel drive 4F/3R Selectable autoshift/manual shift transmission Electronic Control Module programmable, computer controlled proportional shifting with programmable gear selection Onboard diagnostics Heavy Duty Axles: With auto locking differential on front axle, open differential on rear axle Single lever electronic shift control F/N/R switch in loader control handle Downshift button Torque converter Outboard planetary axles Transmission oil cooler Brake pedal transmission disconnect Hydraulic wet disc brakes Spring-applied hydraulic release parking brake Limp-Home Mode Greasable rear axle trunnion HYDRAULICS Electro-hydraulic (EH) joystick loader control Low-effort steering Hydraulic driven fan 8 Diagnostic quick couplers Split flange hydraulic connections 1 inch or greater Hydraulic oil cooler ELECTRICAL 120 amp alternator and voltage regulator Battery isolator/electrical disconnect (2) 1000 CCA 12-volt batteries Electric starter Lights: Front and rear halogen flood lights 2 Front driving headlights high /low beam 2 Front flood 2 Rear flood 2 LED stop and tail lights Front and rear turn signal /flash Key start /stop switch Centrally located fuse box with all electrical circuits protected Backup alarm Remote jump posts OTHER Electric hood lift Front and rear fenders, partial coverage Standard counterweight Drawbar hitch Articulation locking bar Lift arm locking bar Lift and tie-down points front /rear Backup alarm 3-piece rims Grouped remote-mounted ecology drains: Engine oil Engine coolant Hydraulic oil TELEMATICS CASE SiteWatch Telematics includes hardware and a 3-yr Advanced data subscription 1121G 6 of 7
OPTIONAL EQUIPMENT OPERATOR ENVIRONMENT Cloth-covered heated air-suspension seat Leather trimmed heated air seat with active suspension Cloth mechanical suspension seat 3 in (76 mm) retractable seat belt Sound Shield noise suppression package Bluetooth radio, 12V AM/FM with auxiliary input Radio-ready 12 or 24-volt with auxiliary power 12-volt Cab convenience package: Rear sun shade, interior mirror, under the seat drawer, coat hook, 12V accessory port, and an ash tray In cab powered cooler box In cab accessory mount LED rotating beacon Joystick steering Rear view camera External rear view mirrors External heated rear view mirrors Front LED driving/headlights LED front and rear work lights Extra front-facing LED work lights DRIVETRAIN Special application axles with locking front differential and coolers Axle oscillation stops Cold weather package: Engine block heater Fuel heater Hydraulic oil cooler bypass Low temperature hydraulic oil Grid heater HYDRAULICS Auxiliary hydraulics Ride Control Secondary steering 3- or 4-spool loader valves with 2- or 3-lever loader control LOADER Extended reach XR Attachment auxiliary hydraulics Buckets see pages 4 and 5 TIRES 26.5 x 25 L3 Bias 26.5-R25 L3 Radial 26.5 x 25 L5 Bias 26.5-R25 L5 Radial ADVANCED ENGINE AIR FILTRATION Variable speed hydraulic reversing fan Sy-Klone ejector type pre-cleaner OTHER Special paint Tool box Fire extinguisher Side guards for rear frame License plate brackets, front and rear 12 mph (20 kph) maximum speed control Wide full coverage fenders with right and left hand steps CaseCE.com 2017 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Capital is a trademark in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. Printed in U.S.A. Contains 10% post-consumer fiber. Form No. CCE2017081121G Replaces Form No. CCE2016101121G IMPORTANT: CASE Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Availability of some models and equipment builds vary according to the country in which the equipment is used. The illustrations and text may include optional equipment and accessories and may not include all standard equipment. Your CASE dealer/distributor will be able to give you details of the products and their specifications available in your area. CASE Construction Equipment is biodieselfriendly. NOTE: All engines meet current EPA emissions regulations. All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable. Always read the Operator s Manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs and use any safety features provided. 1121G 7 of 7