HM150 150MT DRILLING RIG HUISMAN PRODUCT BROCHURE
M150 ENERAL INTRODUCTION 02
Over the last several years, the oil and gas exploration and production industry has seen a shift towards the exploitation of resources from unconventional sources such as shale, tight formations and other sources requiring horizontal drilling. A large part of this shift is towards increasing safety, reducing personnel on the rig, reducing costs in any way possible such as through drilling multiple wells from a single location. At the same time, operators are required to meet safety targets and environmental regulations in a cost constrained and competitive environment. To meet today s demand for faster and more flexible operations in unconventional environments, Huisman has taken lessons learned from operating their LOC series of land rigs and through discussions and interviews with operators and contractors. This resulted in a new series of highly mobile rigs, including a 150t trailer mounted rig. It s safe, fast, reliable, and easy to move: the HM 150. Q1-1827 4F-0326 7K-0344 8C-0217 03
M150 50 MT DRILLING RIG HM 150 The HM 150 is a highly mobile trailer mounted drilling rig designed to move quickly between multiple wells on a pad, and between different locations. SAFETY All equipment can be controlled from the integrated controls in the driller s cabin, minimizing the need for people on the drill floor during regular operations. The high degree of automation includes a zone management system and safety interlocks which reduces the risk of a clash back to an absolute minimum. Hands-off pipe handling further improves the overall safety of the rig. The rig can also be delivered with the option to handle drill pipe, trip, and run casing fully automatically. IMPROVED RIG PERFORMANCE The integrated auto-driller is used to keep a constant Weight on Bit, constant differential standpipe pressure, or on constant ROP. Combined with the accurate AC controlled drawworks, it improves the drilling performance. The drilling unit can be equipped with a double drum drawworks. The two drums provide redundancy by its design. Using the double drum drawworks, slip-andcut operations are not required which reduces the nonproductive time. The rig can handle both drill pipe and casing in similar fashion, and can be equipped with casing running tools and torque turn software to eliminate the need for separate casing running service which reduces time one well, safety risks, and the overall well costs. The rig is ready for Enhanced Casing Installation, which allows drilling with casing for vertical and lateral sections. Huisman has developed several cost effective down hole tools to be able to further reduce the costs per well. MAIN ADVANTAGES OF THE HM 150 Safety: Less human exposure on the drill floor Safety: Hands off pipe handling Reliability: AC powered rig Integrated SCADA controls with auto driller Pad drilling capabilities Easy to move: Only 2 rig loads and 9 backyard loads Performance: No slip and cut Higher block speeds Autodriller Higher block speeds are achieved by adding splittable blocks. With a push on a button the reeving can be switched between 4 or 8 falls, which doubles the block speed at reduced loads. To be able to handle tubulars remotely from the cabin, the rotary table is equipped with Huisman power slips, which allow hanging off drill pipe and casing (with no load required to hold casing). The integrated one-size-fits-all pipe handler is capable of bringing drill pipe, collars and casing from the horizontal pipe racks directly to well center. H 4
B MAST TRAILER A TELESCOPIC MAST B SPLITTABLE BLOCKS C AC TOP DRIVE D DOUBLE DRUM AC DRAWWORKS C PIPE HANDLER TRAILER E SELF-ELEVATING DRILL FLOOR F ROTARY TABLE G BOP HOISTS H PIPE HANDLER WITH RACKS A G F E D 5
M150 50 MT DRILLING RIG GENERAL RIG SPECIFICATIONS Rig type AC Super single Drill floor height 18 ft 5.5 m Clear height under water table 81 ft 24.6 m Telescopic Mast 165 sht 150 mt Pull down capacity 22 sht 20 mt Hoisting block 4-8 falls Main rig loads 2 pcs Backyard 9 pcs [customizable] DRAWWORKS Power 1,070 hp 800 kw Brakes Caliper, directly on drum Top drive Load 150 sht 136 mt Power 400 hp 300 kw Torque Cont. make / brake 21,000 lbf-ft 28.5 knm 32,000 lbf-ft 43.4 knm ROTARY TABLE Size 37.5 inch 952 mm Hang off capacity 165 sht 150 mt Max holding torque 45,000 lbf-ft 61 knm POWER SLIPS Size 2 3 /8-13 5 /8 inch Hang off capacity 165 sht 150 mt POWER TONG Diameter 2 3 /8-8 1 /2 inch Torque 80,000 lbf-ft 108 knm PIPE HANDLER Pipe size 2 3 /8-13 5 /8 inch Capacity 1.9 sht 1.7 mt AUXILIARIES Tuggers 2x6 sht 5.4 mt Catheads 2x6 sht 5.4 mt BOP-hoist 2x6.6 sht 2x6 mt 6
MUD STREET Mud cleaning + transfer tank 200 bbl 31 m3 Active mud / mud mix 600 bbl 90 m3 Mud pumps 2*1000 hp 745 kw WELL CONTROL BOP BOP control unit Choke & kill 11 inch 3M 3-ram with annular 6 station with 8x11 usg. Accumulator 1x AC hydraulic pump and 2x air driven pump 3 1 /16 inch 5M 1x manual choke 1x remote controlled choke POWER HPU 150 hp 110 kw EPU (VFD) 3100 hp 2300 kw Generators 2x Cat 3512C or eq. OPTIONAL EQUIPMENT Double drum drawworks 2x 500 HP 2x 375 kw Standard hoist blocks 8 parts Pipe ramp 45 ft Pipe tubs 2160 ft 660 m (length of 5 inch drill pipe) Service crane 2 sht 1.8 mt Casing drive assembly 3 1 /2-8 5 /8 inch 4 1 /2-13 5 /8 inch 1 2 3 4 RIG UP SEQUENCE 1 MAST TRAILER AT LOCATION 2 MAST FOLDS OUT, SPREADER IN PLACE 3 MAST TELECSOPES OUT 4 DRILL FLOOR FOLDS OUT, SPREADER INSTALLED 7
HUISMAN EQUIPMENT BV Admiraal Trompstraat 2 3115 HH Schiedam P.O. Box 150 3100 AD Schiedam The Netherlands Harbour no. 561 Phone: +31 (0)10 245 22 22 Fax: +31 (0)10 245 22 20 E-mail: info@huisman-nl.com www.huismanequipment.com 042015