Vacuum Pumps & Blowers 4310 Blower 866 PRODUCT GUIDE HEAVY DUTY VACUUM PUMPS AND PACKAGES 520 CFM Vacuum pumps & Blowers 607 - Several factory designed and built mounting options available. MADE IN THE USA Reliable Efficient Cost Effective 800.253.5500
866 Vacuum Pump - Page 3 866 Pump Stand Complete - Page 5 866 Trap Package - Page 6 866 Max Package - Page 7 866 Engine Drive Package - Page 8 Components & Maintenance - Page 10 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment 2 NVE 2016 866 Product Catalog Rev. 16-01
Product Features: Lifetime warranty on the housing against cracking Vacuum Pumps & Blowers ower 866 Heavy Duty Vacuum Pumps The NVE bi-rotational, four port oil pump is exclusive to our oil management system delivering the precise amount of oil required for any job. Easily adjustable to 5-24 ounces per hour. Rugged braided stainless steel oil delivery lines Vane flush port with valve Vane wear inspection port Integral, easily accessible & cleanable, stainless steel final filter Proven crash protection allowing all major components to survive a catastrophic failure Multiple drive options (gearbox, belt, hydraulic, and direct) Two year warranty against manufacturer defect Designed, built, and supported in the USA 866 Fan Cooled 866 Liquid Cooled Challenger 866 CW Fan Cooled 102-866-FD 507 $5460.00 Challenger 866 CCW Fan Cooled 102-866-FS 507 $5460.00 Challenger 866 CW Liquid Cooled 102-866-LD 533 $5900.00 Challenger 866 CCW Liquid Cooled 102-866-LS 533 $5900.00 Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 16-01 NVE 2016 866 Product Catalog 3
866 Heavy Duty Vacuum Pumps - Hydraulic Motor Drive Product Features: Heavy-duty automatic alignment bracket SAE B face 2 and 4 bolt flange Coupler set Additional mounting bracket required for liquid cooled model Designed, built, and supported in the USA 866 Hydraulic Specs: Mount = SAE 4-BOLT B Flange Shaft = 1.25 with 5/16 Keyway Side Ports = 1-1/2 NPT Cubic Inch Displacement = 8.088^3/rev Permco model # M7600A731A0XQ2000 Max working pressure = 2500 psi Hydraulic pump should supply 38-40 gpm @ 2000 psi to turn the 866 at 900-1000 rpm Customer must install a case drain and plumb back to tank 866 Fan Cooled CW W/HYD Drive 117-866-HYD-FD 612 $7083.00 866 Fan Cooled CCW W/HYD Drive 117-866-HYD-FS 612 $7083.00 866 Liquid Cooled CW W/HYD Drive 117-866-HYD-LD 606 $7713.00 866 Liquid Cooled CCW W/HYD Drive 117-866-HYD-LS 606 $7713.00 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment 4 NVE 2016 866 Product Catalog Rev. 16-01
Product Features: Vacuum Pumps & Blowers ower 866 Pump Stand Complete Packages Vacuum pump included; specify rotation and cooling type Available for fan cooled and liquid cooled models Rugged 3/8 construction, powder coat painted, pump stand 400 series three-shaft gearbox accommodates clockwise and counterclockwise rotation Coupler set with shear protection Easy-align, adjustable gearbox bracket Also available with hydraulic drive Designed, built, and supported in the USA 866 Fan Cooled CW Pump Stand Complete 117-866-001-FD 565 $6869.10 866 Liquid Cooled CW Pump Stand Complete 117-866-001-LD 565 $6993.88 866 Liquid Cooled CCW Pump Stand Complete 117-866-001-LS 565 $6993.88 866 Fan Cooled CW W/HYD DR Pump Stand Complete 117-866-001H-FD 638 $7665.00 Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 16-01 NVE 2016 866 Product Catalog 5
Product Features: 866 Trap Packages All features included in the Pump Stand Complete plus: Vacuum pump included; specify rotation and cooling type High efficiency aluminum moisture trap Accessible 6 stainless steel float ball BUNA positive shut-off ball seat 2 lever drain valve Blank intake flange standard (other fittings available) Vacuum/pressure relief valve and gauge All elbows, fittings and high temp hoses are factory connected Designed, built, and supported in the USA 866 Fan Cooled CW with Trap 117-866-TRAP-PACK-FD 405 $8155.00 866 Fan Cooled CCW with Trap 117-866-TRAP-PACK-FS 405 $8155.00 866 Liquid Cooled CW with Trap 117-866-TRAP-PACK-LD 431 $8155.00 866 Liquid Cooled CCW with Trap 117-866-TRAP-PACK-LS 431 $8155.00 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment 6 NVE 2016 866 Product Catalog Rev. 16-01
Vacuum Pumps & Blowers ower 866 Max Packages Product Features: All features included in the Pump Stand Complete plus: Vacuum pump included; specify rotation, cooling type and muffler location (left or right). 14 round oil catch muffler High efficiency aluminum moisture trap Accessible 6 stainless steel float ball BUNA positive shut-off ball seat 2 lever drain valve Blank intake flange standard (other fittings available) Vacuum/pressure relief valve and gauge Stainless steel mesh filter All elbows, fittings and high temp hoses are factory connected Right-hand or left-hand muffler location available Designed, built, and supported in the USA 866 Fan Cooled CW MAX PKG 117-866-MAX-FD 893 $8505.00 866 Fan Cooled CCW MAX PKG 117-866-MAX-FS 893 $8505.00 866 Liquid Cooled CW MAX PKG 117-866-MAX-LD 966 $8833.17 866 Liquid Cooled CCW MAX PKG 117-866-MAX-LS 966 $8833.17 866 Fan Cooled CW W/Hydraulic Drive MAX PKG 117-866-MAX-FDH 943 $9565.00 866 Fan Cooled CCW W/Hydraulic Drive MAX PKG 117-866-MAX-FSH 943 $9565.00 866 Liquid Cooled CW W/Hydraulic Drive MAX PKG 117-866-MAX-LDH 841 $9959.40 866 Liquid Cooled CCW W/Hydraulic Drive MAX PKG 117-866-MAX-LSH 841 $9959.40 Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 16-01 NVE 2016 866 Product Catalog 7
Product Features: 866 Engine Drive Package Rugged, low profile frame for belly-mount application 60.6 HP Deutz power unit with control panel and tachometer 23 gallon steel fuel tank High efficiency oil catch muffler 12 volt high crank capacity battery Powder coat painted and factory assembled All elbows, fittings and high temperature hoses are factory connected. Designed, built, and supported in the USA 866 Fan Cooled CCW W/60.6 HP Deutz Engine Drive 117-EDR-866 2280 $22,857.14 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment 8 NVE 2016 866 Product Catalog Rev. 16-01
Vacuum Pumps & Blowers ower Page intentionally left blank. Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 16-01 NVE 2016 866 Product Catalog 9
866 Components & Accessories COUPLERS Rexnord coupler set for use with gearbox drive option. GEAR BOXES 400 series 1:1 Mounting brackets available. HYDRAULIC ADAPTER Easily convert from gear box drive to hydraulic drive with the use of this adapter. HYDRAULIC MOTOR Easily convert from gear box drive to hydraulic motor drive with this properly sized motor. HYDRAULIC COUPLERS Lovejoy couplers for use with hydraulic drive option. RELIEF MANIFOLDS Easily installed in 3 & 4 hose. Manifold includes gauges, vacuum and pressure relief valves. ELBOWS & FITTINGS Offers various options and flexibility for connection of hoses. MUFFLER 14 Oil Catch Muffler Available with or without mounting brackets. North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment 10 NVE 2016 866 Product Catalog Rev. 16-01
Vacuum Pumps & Blowers ower 866 Maintenance Items Product Features: The Essential Black Box is a complete pump tool kit that makes it easier to rebuild the Challenger vacuum pumps and comes with: Heavy Duty Carrying Case, Vacuum/Pressure Testing Gauge, Reamer, Infrared Thermometer, Laser Tachometer, 607 PRO & 866 Seal Drivers with Handles, (4) T-Handles, Coupler Alignment Tools, 607 PRO & 866 Shaft Alignment Tools, (2) Shims and the 607 PRO & 866 owner s manuals. The Tool kit makes it easier to rebuild the Challenger vacuum pumps and comes with: Seal driver, Reamer, (2) T-Handles, and (2) shims. The NVE Challenger repair kits come with or without bearings and include the seals, gaskets, and vanes required for repair. The NVE Challenger flush kits come with all the required items to properly flush your Challenger vacuum pumps. The NVE Challenger Pump Oil; though this oil is not required, it is recommended to keep your vacuum pump lubricated properly, particularly in extreme conditions. Sold by the case, six (6) gallons per case. Essential Black Box - Pump Tool Kit 120-OT15 20 $698.00 Tool Kit for 506/866 120-1T 4 $131.25 Repair Kit 866 115-866-0 11 $980.00 Repair Kit 866 (without bearings) 115-866-0B 6 $905.00 Diesel Flush Kit 320-081-002 2 $86.22 Oil Vacuum Pump R&0 ISO 150/SAE 40 - CASE 150-220-VPOIL-150 45 $128.34 Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 16-01 NVE 2016 866 Product Catalog 11
Vacuum Pumps & Blowers 4310 Blower Vacuum pumps & Blowers 607 - We design, build and service the best pumps and packages on the planet... and we do it in the USA. 4310 Blower For over 30 years NVE has been providing quality vacuum system components to the liquid waste markets. From design, to development, to product support, NVE is the industry leader. In addition to our team of engineers and highly qualified support staff, NVE has a state of the art machine shop, fabrication shop, and powder coat paint facility housed in two plants in Traverse City, Michigan. We also have a warehouse and sales support facility in Mansfield, Texas. For questions and additional information please contact your dealer or NVE direct at 800.253.5500. Thank you, Vacuum pumps & Blowers DISTRIBUTED BY: 607-2016 National Vacuum Equipment, Inc. Revised 07/2016