Proven Quality, Reliability & Expertise

CA Threaded Catalog

Proven Quality, Reliability & Expertise ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy, transportation and industrial end markets. Whether delivering critical specs to aircraft pilots, streaming data through communications satellites or giving expectant parents a first look at their unborn children, Cannon connects the world s most important information to the people who need it. In 015, Cannon celebrated 100 years that helped make history. Cannon products were used in the first talking" movies and helped transmit the first messages home from the moon. Today we proudly continue our legacy of innovating to connect the world and inspire the successes of the next century because amazing things happen when great things connect. About ITT ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial markets. Building on its heritage of innovation, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life. Founded in 190, ITT is headquartered in White Plains, N.Y., with employees in more than 5 countries and sales in a total of approximately 5 countries. For more information, visit www.itt.com. www.ittcannon.com

lndustrial / lnstrumentation Rail Defense Vehicles Oil & Gas Medical Commercial & Military Aerospace Heavy Equipment Our connector portfolio remains the most extensive in the industry. Offering a reliable and cost effective range of interconnect solutions. www.ittcannon.com

Introduction ITT Cannon s circular metal connector series CA Threaded is one of the market standards for harsh environment applications in commercial as well as military applications. Derived from the military standard MIL-C-5015 the product portfolio expanded to meet the needs of industrial and heavy vehicle applications around the globe. As a result the commercial offering exceeds the military portfolio by more than 0%. Features and benefits CA Threaded offers a range of features and benefits to customers in all kind of industrial and heavy vehicle markets: Threaded coupling mechanism offering extraordinary vibration resistance A wide range of contacts for both solder and crimp applications allowing to connect the full wire range up to 50mm² cross section An extensive range of backshells offering connections of all typical cable solutions with individual wires or jacket cables in shielded or unshielded versions Materials that allow to meet the stringent requirements of industrial and especially heavy vehicle markets as temperatures ranging from 55 C up to +00 C media resistance* as brake liquids, gasoline, lubricants and others RoHS compliant product versions Contact us for detail or your request for a customized solution. *short time wetting www.ittcannon.com

How to use This catalog is split in several sections to provide A brief introduction to ITT Cannon and CA Threaded A general overview of the CA Threaded product lines Detailed product information including contact arrangements, performance and part number data Detailed supporting information including accessories and tooling The fastest way to find your product of choice is to follow these steps 1 Select your product using the ordering reference option Add accessories and tooling options on the related pages. A connector assembly instruction is available upon request or visit www.ittcannon.com Use the detail pages to better understand the available options like connector styles, contact arrangements and contacts options Use the contact information on the back cover to contact us for further questions or to get advise on where you can purchase our products www.ittcannon.com 5

Table of contents How to use this catalogue...5 Product overview...7 Ordering reference... Contact arrangements...9-1 Mounting dimensions... Separating and coupling dimensions... Wall mounting receptacles...-6 Cable connecting plugs...7-9 Box mounting receptacles...0-1 Straight and right angle plugs...-6 Accessories...7-1 Contacts...- CA Layout Overview...-5 Tooling...6-7 6 www.ittcannon.com

Product overview ELECTRICAL DATA Contact Rating at 0 C (6 F), ambient temperature Contact size (AWG/metric) Rated Current (A max.) ¹ 0/10 S /15S /15 1 /60/100 7 /0 15 0 /500 5 ¹ This applies only to the max. rated current for one contact. If several contacts in one contact arrangement are loaded with higher current the temperature may not exceed 5 C Rated Current vs. Ambient Temperature Test voltage Service rating Test voltage Vrms Instruments 1050 A 000 B 500 D 500 E 500 MECHANICAL FEATURES Ambient temperature Neoprene: 55/5 C ( 67/57 F), FKM: 0/00 C ( /9 F)* ENVIRONMENTAL SEALING Up to IP 65 (in mated condition) Acc. to DIN EN 6006-1 Mating Cycles min. 500 Min. Separating Force per Contact Contact size Separating force metric AWG N min 10 0 0, 15S /15 S / 1,0 5 1,5 60/100,0 0,0 500 0,5 Contacts Resistance (Millivolt test) Contact size Contact resistance (AWG /metric) mω max. 0 /10,0 S /15S 6,0 /15 6,0 /5,0 /100 1,0 /0 0, 0 /500 0, Insulation Resistance Standard insulator material >1000 MΩ FKM insulator material (upon request) >5000 MΩ Air and Creepage Path (min.) Voltage class Instr. A D E Air path, mm 0,7 1,1,, Creepage path, mm 0,7 1,1,, Operation Voltage Operating voltage for CA Threaded connectors is limited to 50VAC / 75VDC according to the safety regulations defined in the European Low Voltage Directive (LVD) 01/5/EU. For other uses or regions please see appropriate regional regulations. Contact Retention Apply test force in mating direction Contact size Test force metric AWG N 10 0 0 15S /15 S / 5 5 55 60/100 0 0 90 500 0 95 Coupling Torque The admissible coupling torque has to be tested under harnessed condition Admissible torque Shell size Closing and opening (Nmmax) Opening (Nmmin) 10SL,0 0,15 S, 0, 1S 5,9 0,5 S/ 7,0 0,6 1,0 0,5 0 9,0 0,70 10,6 0,0,9 0,0,7 0,9 1,1 1,0 6,9 1,05 Materials Shell Contacts Insulator / Grommet * consult factory Aluminum alloy Copper alloy, silver plated or gold plated Polychloroprene (Standard) FKM (High temperature) www.ittcannon.com 7

Ordering reference Part number explanation CA 106 E 1-1 P W F1 Series CA Cannon Designation Shell type 100 Wall mounting receptacle see page -6 101 Cable connecting plug see page 7-9 10 Box mounting receptacle see page 0-1 0 Box mounting receptacle, rear mounting see page 0-1 106 Plug, straight see page - 10 Plug, 90 see page 5 Class E Backshell with cable clamp¹ F Backshell for flex tube PG Adapter for PG-termination ME Adapter for Metric-termination L PCB solder termination R Short backshell, no strain relief Shell size 10SL, S, 1S,, S, 1, 0,,,,, 6 Contact arrangement see page 9-1 Contact type P pin S socket Insulator position see page 9-19 Modification 1 shielded version, solder pot contacts, no grounding spring 1 shielded version, metric crimp contacts, no grounding spring 15 shielded version, AWG crimp contacts, no grounding spring F backshell with O-ring seal without ferrule and grommet Grounding spring on the barrel A176 Contacts gold plated see page - A Zinc cobalt black plating, RoHS compliant A Zinc cobalt green plating, RoHS compliant A0 Zinc nickel plating, blue iridescent, RoHS compliant BM9 Threaded flange holes, shell styles 0, 0 and 00 DN Adapter for heat shrink boots F0 Without contacts (to be ordered separately) F Without backshell, grommet and ferrule F0 AWG Crimp contacts F17 O-ring under the coupling nut ² F1 Metric Crimp contacts ¹ except shell style 0 / 0 ² a number of plugs are already featured with this O-ring www.ittcannon.com

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization 10SL- S A 10SL- S A S- S A 70 15 15 90 1 S- S D SA10 S Instr. 110 50 1S-1 S A 1S- S Instr. 0 0 1 1S- S D 5 1S-5 S Instr. 110 6 1S-6 S Instr. 1S-7 S A 90 10 70 1S-9 S Instr. 70 15 15 90 7 1SA7 S Instr. 7 S-1 S A 0 0 S- S D 5 110 50 5 S-5 S A 70 15 15 90 5 S- S A 170 65 Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly. www.ittcannon.com 9

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization -7 1 A 0 110 50 0-9 A 5 110 50 5-10 A 90 10 70-11 A 5 110 50 5 1 - A A11 A 5 110 50 5 10 1-1 A (B, C, F, G) Instr. (all others) 70 15 15* 90 1- D 5 110 50 5 1- D 5 110 50 5 1-5 1 D 0 110 50 0 1 1-6 D 1 1-7 D 7 1 7 5 1- A 70 90 1-9 Instr. 0 110 50 0 1-10 A 0 0 5 1-11 A 170 65 6 1- A 0 0 *Caution: This insulator rotation is not recommended as it can mate with normal rotation connectors. Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly. 10 www.ittcannon.com

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization 1-1 1 7 1-17 5 10 1-19 A 0 110 50 0 Instr. 100 A 0 0 5 1-0 A 90 10 70 1-1 A 1- D 70 15 15 90 1 0-0 D 0- D 70 15 15 90 0- D 5 110 50 50 (0A7) 0-6 D 0-7 6 0-1 0-11 A (C, D, E, F) D (A, B, H, G) 0 110 50 0 Instr. 0 110 50 0 Instr. 5 0-1 7 0-15 A 0 110 50 0 A 0 0 9 6 7 5 1 0-0-17 A 0 110 50 0 A 90 10 70 Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly. www.ittcannon.com 11

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization 9 6 0-1 A 5 110 50 5 0-19 A 90 10 70 6 0- A 0 110 50 0 0- A 5 110 50 5 0- A 5 110 50 5 1 0-7 A 5 110 50 5 17 0-9 A 0 0 11 0- A 60 17 110 10 9 0A9 Instr. (all others) 110 50 0A 0 No solder pot contacts available for #10/0 19 0A Instr. 0 0-1 D 5 110 50 5 - D 70 15 15 90 - A 5 110 50 5 6-5 D 5 110 50 5 1-7 0 E Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly. *Reduced contact termination 0,mm. www.ittcannon.com

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization - E 5 110 50 5-9 E 70 15 15 90-10 E 5 110 50 5 5 - D 0 110 50 0 19-1 A 0 0 6 5 1-15 A (A, B, C, E, F) E (D) 0 110 50 0 9 - A 0 110 50 0 1-19 A 0 110 50 0 9 6-0 A 5 110 50 5 1-1 0 A 0 110 50 0 - A 110 50 - D (H) A (all others) 5 50 9 1-7 A (A to H) 0 50 0 7 - A 0 0 7 - D 0 0 Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly. www.ittcannon.com 1

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization - 1 0 D 0 110 50 0-5 A 0 110 50 0 1-7 A 0 110 50 0-9 A 5 110 50 5 7-10 A 0 0 9 6-11 A 5 110 50 5 5 - A 0 110 50 0-19 A 11 9-0 D 0 110 50 0 - D 5 110 50 7-7 E 0 0 - Instr. 0 110 50 0 A A 9 60 0 0 100 A Instr. 65 16 5 19 1 5 1 A51 A 1 0 1 www.ittcannon.com

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization 1 - D 5 110 50 5 5 1-5 D 5 110 50 5 6 6-9 D 0 110 50 0 7-10 A (= A, B, C, D, E, F) D (= G) 0 110 50 0 1-11 A 0 110 50 0 6 - A 90 10 70 5-15 A 0 110 50 0 0 - A (A-L) D (M, N, P) 0 110 50 0 10 6-19 A (= C, E, G, J, K, L) D = A, B B = H, M 0 110 50 0 1 10-0 A 0 110 50 0 7-1 A 0 110 50 0 6 - D 70 15 15 90 www.ittcannon.com 15

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization -51 D 0 15 195 9 5 A A (e) Instr. 9 60 110 50 0 A51 A 9 110 0 50 0 100 9 19 A6 A 100 60 5-1 0 E (A) D (all others) 0 110 50 0-5 0 D 5 110 50 5-6 A 0 110 50 0 5 7-7 Instr. (A, B, U, I.) A (all others) 0 5 5 0 0 6 - A 0 5 5 0 1-9 D 0 110 50 0 www.ittcannon.com

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization 5 1-1 D 0 110 50 0 6-15 0 D 5 110 50 5-17 D 5 110 50 5 A10 A 0 110 50 0 9 110 0 50 0 100 7 A7 A 9 60 110 0 50 0 100 55 A55 A 0 110 50 0 61 0 1 A69 0 Instr. 110 50 No solder pot contacts available for #10/0 contacts. 6 6-0 D 70 15 15 90 6-5 0 A 0 0 www.ittcannon.com 17

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization 6 6-6 0 A 5 110 50 5 7 7 0 6-7 A 0 110 50 0 7 1 6 6- A 0 110 50 0 1 1 1 1 6-9 A 0 5 5 0 6-10 A 0 5 5 0 5 5 6 6-1 D 5 6-15 D (m) A (all others) 60 5 5 05 5 6A A 9 0 60 110 0 50 0 100 0 1 www.ittcannon.com

CONTACT ARRANGEMENTS View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size Service rating Insulator position W X Y Z Position Special polarization 6A5 0 A 9 60 110 50 0 7 6A6 A 9 60 110 0 50 0 100 9 1 6A9 A 110 65 15 50 6A99 0* Instr. 0 15 No solder pot contacts available for #10/0 contacts. *Reduced contact termination 0, mm. Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly. ALTERNATE INSERT POSITION Indicates location of centerline of key or keyway of shells in fixed normal position. Insert is rotated as shown by arrow and letters. Normal Position: 0 Tolerances: Pin insulator 10SL-0: ±,0 Pin insulator -6: ± 1,5 Pin mating face Socket mating face www.ittcannon.com 19

CONTACT ARRANGEMENTS Contact arrangement No. of Contacts Contact size 0 0 500 0 100 5 15 10 60 S 1 1 1S 1 1-1 1 1-6 1 1 1-7 1 1 0-1 1-7 1 1 10SL 1S9 S -11 A11 1-0- -1 - -9-5 10SL 1S1 1S7 S5-7 1-10 1-5 1 1-1 1-0- 0-6 0-19 - -9-1 1 SA10 1S -9 1-1-10 1-1 1 0-0- - -10 - - 1 - -17 6-5 Contact arrangement No. of Contacts Contact size 0 0 500 0 100 5 15 10 60 1S5 5 5 S 5 5 1-11 5 5 1-0 5 5 0-1 5-5 - 5-5 5 1-1 5 1S6 6 6 1-6 6 0-6 0-17 6 5 1 0-6 -5 6-15 6 5 1-6 6-6 6-6 6 1SA7 7 7 S1 7 7 1-9 7 5 1-17 7 5 0-15 7 7-7 7-7 7-10 7 7-7 7 7-10 7 1-1 7 0-7 - -15 6 6A5-6 0-9 7 0-1 9 6 0A9 9 9-9 6-0 9 9-7 9 1-11 9 6 A 9 5 1-1 10 10 1-19 10 10-19 10 6 0 www.ittcannon.com

Contact arrangement No. of Contacts Contact size 0 0 500 0 100 5 15 10 60 0-11 11-0 11 9-19 A -9 6 6-51 Contact arrangement No. of Contacts Contact size 0 0 500 0 100 5 15 10 60 A51 A7 7 7 6-7 7 7 0 6-7 1 6 6-10 0-11 1 1 6A 5 5 0-7 1 1-19 1 1-1 -0 1 10-9 1-5 -7 1 6-1 5 5 6 A10 5 5 A55 55 55 A69 61 0 1 6A99 65 15 50 0-9 17 17 0A 19 19-1 19 19-0 0-11 1-6 -1 5 1-0A - 6 6 6A6 7 7 A A6 9 19-0 6 6-9 1 1 1 1-15 5 5-7 5 7 6-15 5 5-1 7 7 6A9 9 1 A51 www.ittcannon.com 1

MOUNTING HOLES Shell size CA Threaded d1 H d1 H CA100, CA0 CA10,CA0 d H1 e 10SL,0,, 1, S 19,1,, 0,6 1S, 19,7,,0 S / 5,5,9,,6 1,7 6,1, 7,0 0 1, 9,5, 9, 5,0,7, 1,, 6,0,9,9,5,0,9 9,7 50,9,,5,5 6 57, 5,1,5 9, Mounting holes for connectors styles, complete receptacle range HARNESSING WIRE STRIPPING CA Threaded connectors are designed for single wire harnessing, if an individual wire sealing grommet is used. Wires have to conform to wire and insulation diameters with the data given in the following table: Contact size Crimp / solder contacts Insulation Ø AWG metric mm AWG metric mm² AWG metric mm 10 0,75-1,0 1,5-,5 S /15S /15 0,75-1,5 1,6-, 1,60-, 5,5,9-,5,9-,5 60 6,0,5-,9 100 10,0,-5, 5,5-6,5 0,0 6,-9,0 7,1-9,0 0 500 0 50,0 10,5-1,0 10,5-1,0 Either mechanical or hot stripping can be used. Prevent conductors or insulators damage. For solder contacts, conductors have to be pretinned. Note: Do not twist conductors used with crimp contacts. Do not touch uninsulated conductors before crimping, twisting of conductors and grease or lubricants on the wires cause poor crimp quality. Contact size Stripping length AWG metric mm 10,0 + 0, S/15S /15 6,0 + 0,5 5 6,0 + 0,5 60/100 11,0 + 0, 0, 0 11,0 + 0, 0, 0 500 1,0 + 0, 0, WIRING HINTS Strip wires carefully. Do not damage conductors and insulation. For solder connections, wires have to be pretinned. Do not twist conductors used in crimp contacts, otherwise no perfect crimp connection will be achieved. Do not touch conductors before crimping. Film of grease or lubricants on the strands will cause poor crimp quality. For detailed assembly instructions please visit www.ittcannon.com and search for the keyword "CA Bayonet Assembly Instruction". www.ittcannon.com

SEPARATING AND COUPLING DIMENSIONS PLUG RECEPTACLE CA106E CA10E CA106E-DN PLUG RECEPTACLE CA106F CA10E CA06PG/ME PLUG RECEPTACLE CA10E CA10E CA106E-DN CA0L CA0E Shell size l1 l l l l5 l6 l7 l min. min. min. min. min. min. max. max. 10SL 70 70 65 0 70 65,5,0 S 70 75 65 0 75 70,5,0 1S 70 75 65 0 75 0,5,0 S 70 90 65 0 0 0,5,0 0 100 70 100 90 100,5,0 1 90 100 70 110 95 110,5,0 0 90 100 70 110 95 110,5,0 90 100 70 110 95 110,5,0 110 0 90 0 105 0 5,0,0 110 0 90 0 105 0 5,0 9,0 110 10 90 0 115 0 6,0 9,0 6 110 190 100 10 0 10 6,0 9,0 www.ittcannon.com

CANNON CA THREADED WALL MOUNTING RECEPTACLE CLASS F, E CA100E CA100E designates a wall mounting receptacle. It mates with plugs CA106 and CA10. If crimp version is required please order CA100E F0 or CA100E F1. Part No. CA (pin insert*) A l1 l l l l5 d1¹ d e Thread max. ±0, max. +0,/ 0,1 max. +0, ±0, CA100E10SL-**P*** 5/-UNEF-A 5 1,, 5, 0 6,5,1 1, CA100ES-**P*** /-0UNEF-A 5 1,,,0 0 6,5,1 0,6 CA100E1S-**P*** 7/-0UNEF-A 55 1,, 0,0 0 9,0,1,0 CA100ES-**P*** 1-0UNEF-A 56 1,,,5 5 11,0,1,6 CA100E-**P*** 1-0UNEF-A 66 19,0,,5 5 11,0,1,6 CA100E1-**P*** 1-1/-1UNEF-A 6 19,0,0 5,0 5 1,,1 7,0 CA100E0-**P*** 1-1/-1UNEF-A 6 19,0,0,0 5 15,,1 9, CA100E-**P*** 1-/-1UNEF-A 6 19,0,0 1,0 5 15,,1 1, CA100E-**P*** 1-1/-1UNEF-A 76 0,6,0,5 5 1,,7,9 CA100E-**P*** 1-/-1UNS-A 76 0,6,0 50, 5 1,,7 9,7 CA100E-**P*** -1UNS-A 76,,0 57,0 5 6,7,,5 CA100E6-**P*** -1/-UN-A 76,,0 6,5 15 1,7, 9, ¹ max. cable dia CA100R CA100R designates a receptacle with a shorter and lightweight backshell. It mates with plugs CA106 and CA10. If crimp version is required please order CA100R F0 or CA100R F1. Part No. CA (pin insert*) A l1 l l l d1¹ d e Thread max. ±0, max. ±0, ±0, ±0, CA100R10SL-**P*** 5/-UNEF-A 5 1,, 5, 9,6,1 1, CA100RS-**P*** /-0UNEF-A 5 1,,,0 10,,1 0,6 CA100R1S-**P*** 7/-0UNEF-A 55 1,, 0,0,,1,0 CA100RS-**P*** 1-0UNEF-A 56 1,,,5 15,,1,6 CA100R-**P*** 1-0UNEF-A 66 19,0,,5 15,,1,6 CA100R1-**P*** 1-1/-1UNEF-A 6 19,0,0 5,0 1,,1 7,0 CA100R0-**P*** 1-1/-1UNEF-A 6 19,0,0,0,0,1 9, CA100R-**P*** 1-/-1UNEF-A 6 19,0,0 1,0,7,1 1, CA100R-**P*** 1-1/-1UNEF-A 76 0,6,0,5 7,6,7,9 CA100R-**P*** 1-/-1UNS-A 76 0,6,0 50, 1,6,7 9,7 CA100R-**P*** -1UNS-A 76,,0 57,0,5,,5 CA100R6-**P*** -1/-UN-A 76,,0 6,5,5, 9, * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page ¹ max. cable dia www.ittcannon.com

CANNON CA THREADED WALL MOUNTING RECEPTACLE CLASS F, DN CA100F CA100F designates a wall mounting receptacle with backshell for flex tubes or to be combined with a cable clamp. It mates with plugs CA106 and CA10. Part No. CA A d d¹ d l1 l l I l5 e (pin insert*) Thread +0,/ 0,1 Thread max. +0, ±0, ±0, min. ±0,1 CA100F10SL-**P-*** 5/-UNEF-A,1, 5/-UNEF-A 5,0 1,, 5, 9,5 1, CA100FS-**P-*** /-0UNEF-A,1, 5/-0UNEF-A 5,0 1,,,0 9,5 0,6 CA100F1S-**P-*** 7/-0UNEF-A,1 11,1 /-0UNEF-A 5,0 1,, 0,0 9,5,0 CA100FS-**P-*** 1-0UNEF-A,1 1, 7/-0UNEF-A 5,0 1,,,5 9,5,6 CA100F-**P-*** 1-0UNEF-A,1 1, 7/-0UNEF-A 5,0 19,0,,5 9,5,6 CA100F1-**P-*** 1-1/-1UNEF-A,1,7 1-0UNEF-A 5,0 19,0,0 5,0 9,5 7,0 CA100F0-**P-*** 1-1/-1UNEF-A,1 19, 1-/-1UNEF-A 55,0 19,0,0,0 9,5 9, CA100F-**P-*** 1-/-1UNEF-A,1 19, 1-/-1UNEF-A 5,0 19,0,0 1,0 9,5 1, CA100F-**P-*** 1-1/-1UNEF-A,7 5, 1-7/-1UNEF-A 59,0 0,6,0,5 9,5,9 CA100F-**P-*** 1-/-1UNS-A,7 7,0 1-7/-1UNEF-A 60,0 0,6,0 50, 9,5 9,7 CA100F-**P-*** -1UNS-A,,5 1-/-1UNS-A 6,0,,0 57,0 11,0,5 CA100F6-**P-*** -1/-UN-A, 5,7-1UNS-A 6,0,,0 6,5 11, 9, ¹ max. cable dia CA100E-DN CA100E-DN designates a wall mounting receptacle with backshell for heat-shrinkable boots. It mates with plugs CA106 and CA10. Part No. CA (pin insert*) A d d d¹ d5 l1 l l I l5 e Thread +0,/ 0,1 ±0, max. max. +0, ±0, ±0,5 ±0, ±0,1 CA100E10SL-**P-DN 5/-UNEF-A,1 15,5 7,7 1, 9,0 1,, 11,7 5, 1, CA100ES-**P-DN /-0UNEF-A,1 15,5 7,9 1, 9,0 1,, 11,7,0 0,6 CA100E1S-**P-DN 7/-0UNEF-A,1 19,1 10,6 17,0 9,0 1,, 11,7 0,0,0 CA100ES-**P-DN 1-0UNEF-A,1,9 1,5 1,9 9,0 1,, 11,7,5,6 CA100E-**P-DN 1-0UNEF-A,1,9 1,5 1,9 5,0 19,0, 11,5,5,6 CA100E1-**P-DN 1-1/-1UNEF-A,1,9 1,6 1,9 5,0 19,0,0 11,5 5,0 7,0 CA100E0-**P-DN 1-1/-1UNEF-A,1 9,6 1,7 6, 60,0 19,0,0,7 5,0 7,0 CA100E-**P-DN 1-/-1UNEF-A,1 9,6 0, 6, 60,0 19,0,0,7 1,0 1, CA100E-**P-DN 1-1/-1UNEF-A,7 7,,6,5 6,0 0,6,0,7,5,9 CA100E-**P-DN 1-/-1UNS-A,7 7, 7,0,5 6,0 0,6,0,7 50, 9,7 CA100E-**P-DN -1UNS-A, 7,,,6 67,0,,0 15, 57,0,5 CA100E6-**P-DN -1/-UN-A, 7,,5,6 6,0,,0 15, 6,5 9, * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page ¹ max. cable dia www.ittcannon.com 5

CANNON CA THREADED WALL MOUNTING RECEPTACLE CLASS PG/ME, SHIELDED CA00PG and CA00ME CA00PG/ME designates a wall mounting receptacle for usage with PG or metric glands. It mates with plugs CA106 and CA10. The cable gland is not content of the delivery. Part No. CA (pin insert*) A d1 d l1 l l I e Thread +0,/ 0,1 PG-Thread Metric max. +0, ±0, ±0, ±0,1 CA00PG10SL-*P-*** CA00ME10SL-**P-*** 5/-UNEF-A,1 PG9 M 1,5 5,0 1,, 5, 1, CA00PGS-**P-*** CA00MES-**P-*** /-0UNEF-A,1 PG9 M 1,5 5,0 1,,,0 0,6 CA00PG1S-**P-*** CA00ME1S-**P-*** 7/-0UNEF-A,1 PG11 M0 1,5 5,0 1,, 0,0,0 CA00PGS-*P-*** CA00MES-**P-*** 1-0UNEF-A,1 PG1,5 M0 1,5 5,0 1,,,5,6 CA00PG-**P-*** CA00ME-**P-*** 1-0UNEF-A,1 PG1,5 M0 1,5 6,0 19,0,,5,6 CA00PG1-**P-*** CA00ME1-**P-*** 1-1/-1UNEF-A,1 PG1,5 M5 1,5 69,0 19,0,0 5,0 7,0 CA00PG0-**P-*** CA00ME0-**P-*** 1-1/-1UNEF-A,1 PG M5 1,5 70,0 19,0,0,0 9, CA00PG-**P-*** CA00ME-**P-*** 1-/-1UNEF-A,1 PG M 1,5 7,0 19,0,0 1,0 1, CA00PG-**P-*** CA00ME-**P-*** 1-1/-1UNEF-A,7 PG M 1,5 7,0 0,6,0,5,9 CA00PG-**P-*** CA00ME-**P-*** 1-/-1UNS-A,7 PG1 M 1,5 7,0 0,6,0 50, 9,7 CA00PG-**P-*** CA00ME-**P-*** -1UNS-A, PG9 M0 1,5 76,0,,0 57,0,5 CA00PG6-**P-*** CA00ME6-**P-*** -1/-UN-A, PG9 M0 1,5 7,0,,0 6,5 9, CA100E -1/-1/-15 CA100E -1/-1/-15 designates a shielded wall mounting receptacle with backshell to accommodate cable braids and heat-shrinkable boots. For Mod. codes please see page. It mates with plugs CA106-1/-1/-15. Part No. CA A d1¹ d d d l1 l l I e (pin insert*) Thread +0,/ 0,1 ±0,5 max. max. +0, ±0, ±0,5 ±0,1 CA100E10SL-**P-*** 5/-UNEF-A 7,7,1 1,5, 55,0 1,, 5, 1, CA100ES-**P-*** /-0UNEF-A 7,9,1 0,0 17,0 55,0 1,,,0 0,6 CA100E1S-**P-*** 7/-0UNEF-A 10,6,1,0 0,0 5,0 1,, 0,0,0 CA100ES-**P-*** 1-0UNEF-A 1,5,1 5,0,0 70,0 1,,,5,6 CA100E-**P-*** 1-0UNEF-A 1,5,1 5,0,0 70,0 19,0,,5,6 CA100E1-**P-*** 1-1/-1UNEF-A 1,6,1,0,5 70,0 19,0,0 5,0 7,0 CA100E0-**P-*** 1-1/-1UNEF-A 1,5,1,0,5 70,0 19,0,0,0 7,0 CA100E-**P-*** 1-/-1UNEF-A 0,,1,0 0,5 70,0 19,0,0 1,0 1, CA100E-**P-*** 1-1/-1UNEF-A,6,7,0,5 70,0 0,6,0,5,9 CA100E-**P-*** 1-/-1UNS-A 7,0,7 1,0 7,5 70,0 0,6,0 50, 9,7 CA100E-**P-*** -1UNS-A,,,0,0 75,0,,0 57,0,5 CA100E6-**P-*** -1/-UN-A,5, 55,0 51,0 5,0,,0 6,5 9, * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page ¹ max. cable dia 6 www.ittcannon.com

CANNON CA THREADED CABLE CONNECTING PLUG CLASS F, E, R CA101E CA101E designates a cable connecting plug (without flange and coupling nut). It mates with plugs CA106 and CA10. Part No. CA (pin insert*) A d1 d¹ l1 l l I I5 Thread max. max. +0, ±0, max. max. CA101E10SL-**P*** 5/-UNEF-A 1, 6,5 5,0 1,,, 0 CA101ES-**P*** /-0UNEF-A 5,0 6,5 5,0 1,, 19, 0 CA101E1S-**P*** 7/-0UNEF-A, 9,0 55,0 1,,,5 0 CA101ES-**P*** 1-0UNEF-A 1, 11,0 56,0 1,, 5,7 0 CA101E-**P*** 1-0UNEF-A 1, 11,0 66,0 19,0, 5,7 5 CA101E1-**P*** 1-1/-1UNEF-A,5 1, 6,0 19,0,0,9 5 CA101E0-**P*** 1-1/-1UNEF-A 7, 15, 6,0 19,0,0,1 5 CA101E-**P*** 1-/-1UNEF-A 0,9 15, 6,0 19,0,0 5, 5 CA101E-**P*** 1-1/-1UNEF-A, 1, 76,0 0,6,0, 5 CA101E-**P*** 1-/-1UNS-A 50, 1, 76,0 0,6,0, 5 CA101E-**P*** -1UNS-A 56, 6,7 76,0,,0 51,1 5 CA101E6-**P*** -1/-UN-A 6,1 1,7 76,0,,0 57,5 15 ¹ max. cable dia CA101R CA101R designates a cable connecting plug (without flange and coupling nut) with a shorter and lightweight backshell. It mates with plugs CA106 and CA10. Utilized to realize a cable to cable connection. If crimp version is required please order CA101R F0 or CA101R F1 Part No. CA (pin insert*) A d1¹ l1 l l I Thread max. + 0, ± 0, ± 0, CA101R10SL-**P*** 5/-UNEF-A 9,6 5,0 1,,, CA101RS-**P*** /-0UNEF-A 10, 5,0 1,, 19, CA101R1S-**P*** 7/-0UNEF-A, 55,0 1,,,5 CA101RS-**P*** 1-0UNEF-A 15, 56,0 1,, 5,7 CA101R-**P*** 1-0UNEF-A 15, 66,0 19,0, 5,7 CA101R1-**P*** 1-1/-1UNEF-A 1, 6,0 19,0,0,9 CA101R0-**P*** 1-1/-1UNEF-A,0 6,0 19,0,0,1 CA101R-**P*** 1-/-1UNEF-A,7 6,0 19,0,0 5, CA101R-**P*** 1-1/-1UNEF-A 7,6 76,0 0,6,0, CA101R-**P*** 1-/-1UNS-A 1,6 76,0 0,6,0, CA101R-**P*** -1UNS-A,5 76,0,,0 51,1 CA101R6-**P*** -1/-UN-A,5 76,0,,0 57,5 * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page ¹ max. cable dia www.ittcannon.com 7

CANNON CA THREADED CABLE CONNECTING PLUG CLASS F, DN CA101F CA101F designates a cable connecting plug (without flange and coupling nut) with backshell for flex tubes or to be combined with a cable clamp. It mates with plugs CA106 and CA10. Utilized to realize a cable to cable connection. If crimp version is required please order CA101F F0 or CA101F F1 Part No. CA (pin insert*) A d1 d¹ d L1 L L L L5 Thread max. Thread max. +0, ±0, min. ±0, CA101F10SL-**P-*** 5/-UNEF-A 1,, 5/-UNEF-A 5,0 1,, 9,5, CA101FS-**P-*** /-0UNEF-A 5,0, 5/-0UNEF-A 5,0 1,, 9,5 19, CA101F1S-**P-*** 7/-0UNEF-A, 11,1 /-0UNEF-A 5,0 1,, 9,5,5 CA101FS-**P-*** 1-0UNEF-A 1, 1, 7/-0UNEF-A 5,0 1,, 9,5 5,7 CA101F-**P-*** 1-0UNEF-A 1, 1, 7/-0UNEF-A 5,0 1,, 9,5 5,7 CA101F1-**P-*** 1-1/-1UNEF-A,5,7 1-0UNEF-A 5,0 19,0,0 9,5,9 CA101F0-**P-*** 1-1/-1UNEF-A 7, 19, 1-/-1UNEF-A 55,0 19,0,0 9,5,1 CA101F-**P-*** 1-/-1UNEF-A 0,9 19, 1-/-1UNEF-A 5,0 0,6,0 9,5 5, CA101F-**P-*** 1-1/-1UNEF-A, 5, 1-7/-1UNEF-A 59,0 0,6,0 9,5, CA101F-**P-*** 1-/-1UNS-A 50, 7,0 1-7/-1UNEF-A 60,0 0,6,0 9,5, CA101F-**P-*** -1UNS-A 56,,5 1-/-1UNS-A 6,0,,0 11,0 51,1 CA101F6-**P-*** -1/-UN-A 6,1 5,7-1UNS-A 6,0,,0 11, 57,5 ¹ max. cable dia CA101E-DN CA101E-DN designates a cable connecting plug (without flange and coupling nut) with backshell for heat-shrinkable boots. It mates with plugs CA106 and CA10. Utilized to realize a cable to cable connection. If crimp version is required please order CA101E-DN-F0 or CA101E-DN-F1 Part No. CA (pin insert*) A d1 d¹ d d l1 l l l l5 Thread max. ±0,5 ±0, max. ±0, ±0, max. ±0, CA101E10SL-**P-DN 5/-UNEF-A 1, 7,7 15,5 7,7 9,0 1,, 11,7, CA101ES-**P-DN /-0UNEF-A 5,0 7,9 15,5 7,9 9,0 1,, 11,7 19, CA101E1S-**P-DN 7/-0UNEF-A, 10,6 19,1 10,6 9,0 1,, 11,7,5 CA101ES-**P-DN 1-0UNEF-A 1, 1,5,9 1,5 9,0 1,1, 11,7 5,7 CA101E-**P-DN 1-0UNEF-A 1, 1,5,9 1,5 5,0 19,0, 11,5 5,7 CA101E1-**P-DN 1-1/-1UNEF-A,5 1,6,9 1,6 5,0 19,0,0 11,5,9 CA101E0-**P-DN 1-1/-1UNEF-A 7, 1,7 9,6 1,7 60,0 19,0,0,7,1 CA101E-**P-DN 1-/-1UNEF-A 0,9 0, 9,6 0, 60,0 19,0,0,7 5, CA101E-**P-DN 1-1/-1UNEF-A,,6 7,,6 6,0 0,6,0,7, CA101E-**P-DN 1-/-1UNS-A 50, 7,0 7, 7,0 6,0 0,6,0,7, CA101E-**P-DN -1UNS-A 56,, 7,, 67,0,,0 15, 51,1 CA101E6-**P-DN -1/-UN-A 6,1,5 7,,5 6,0,,0 15, 57,5 * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page ¹ max. cable dia www.ittcannon.com

CANNON CA THREADED CABLE CONNECTING PLUG PG/ME, SHIELDED CA01PG and CA01ME CA01PG/ME designates a cable connecting plug (without flange and coupling nut) for usage with PG or metric glands. It mates with plugs CA106 and CA10. The cable gland is not content of the delivery. Part No. CA (pin insert*) A d1 d d l l I Thread max. PG-Thread Metric max. +0, ±0, max. CA01PG10SL-**P-*** CA01ME10SL-**P-*** 5/-UNEF-A, PG9 M 1,5 5,0 1,, 1, CA01PGS-**P-*** CA01MES-**P-*** /-0UNEF-A 19, PG9 M 1,5 5,0 1,, 5,0 CA01PG1S-**P-*** CA01ME1S-**P-*** 7/-0UNEF-A,5 PG11 M0 1,5 5,0 1,,, CA01PGS-**P-*** CA01MES-**P-*** 1-0UNEF-A 5,7 PG1,5 M0 1,5 5,0 1,, 1, CA01PG-**P-*** CA01ME-**P-*** 1-0UNEF-A 5,7 PG1,5 M0 1,5 6,0 19,0, 1, CA01PG1-**P-*** CA01ME1-**P-*** 1-1/-1UNEF-A,9 PG1,5 M5 1,5 69,0 19,0,0,5 CA01PG0-**P-*** CA01ME0-**P-*** 1-1/-1UNEF-A,1 PG M5 1,5 70,0 19,0,0 7, CA01PG-**P-*** CA01ME-**P-*** 1-/-1UNEF-A 5, PG M 1,5 7,0 19,0,0 0,9 CA01PG-**P-*** CA01ME-**P-*** 1-1/-1UNEF-A, PG M 1,5 7,0 0,6,0, CA01PG-**P-*** CA01ME-**P-*** 1-/-1UNS-A, PG1 M 1,5 7,0 0,6,0 50, CA01PG-**P-*** CA01ME-**P-*** -1UNS-A 51,1 PG9 M0 1,5 76,0,,0 56, CA01PG6-**P-*** CA01ME6-**P-*** -1/-UN-A 57,5 PG9 M0 1,5 7,0,,0 6,1 CA101E -1/-1/-15 CA101E -1/-1/-15 designates a shielded cable connecting plug (without flange and coupling nut) to accommodate cable braids and heat-shrinkable boots. For Mod. codes please see page. It mates with plugs CA106-1/-1/-15. Utilized to realize a cable to cable connection. Part No. CA A d1¹ d d l1 l l l (pin insert*) Thread ±0,5 max. max. ±0, ±0, max. CA101E10SL-**P-*** 5/-UNEF-A 7,7 1,5, 55,0 1,,, CA101ES-**P-*** /-0UNEF-A 7,9 0,0 17,0 55,0 1,, 19, CA101E1S-**P-*** 7/-0UNEF-A 10,6,0 0,0 5,0 1,,,5 CA101ES-**P-*** 1-0UNEF-A 1,5 5,0,0 70,0 1,1, 5,7 CA101E-**P-*** 1-0UNEF-A 1,5 5,0,0 70,0 19,0, 5,7 CA101E1-**P-*** 1-1/-1UNEF-A 1,6,0,5 70,0 19,0,0,9 CA101E0-**P-*** 1-1/-1UNEF-A 1,6,0,5 70,0 19,0,0,1 CA101E-**P-*** 1-/-1UNEF-A 0,,0 0,5 70,0 19,0,0 5, CA101E-**P-*** 1-1/-1UNEF-A,6,0,5 70,0 0,6,0, CA101E-**P-*** 1-/-1UNS-A 7,0 1,0 7,5 70,0 0,6,0, CA101E-**P-*** -1UNS-A,,0,0 75,0,,0 51,1 CA101E6-**P-*** -1/-UN-A,5 55,0 51,0 5,0,,0 57,5 * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page ¹ max. cable dia www.ittcannon.com 9

CANNON CA THREADED BOX MOUNTING RECEPTACLE CA10 CA10E designates a box mounting receptacle for front panel mounting with square flange. It mates with plugs CA106 and CA10. If crimp version is required please order CA10E F0 or CA10E F1. Dimension X max for pin or socket (solder contacts only) Shell size Contact size 0 10SL 1,6 S,1S,S 1, 17,9 17,9 1 17,9 17,9 19,5 17,9 17,9 19,5 19,5 1 17,1 17,1 1,7 1,7 0, 17,1 17,1 1,7 1,7,7, 15,5 15,5 17,1 17,1,1, 6 1,9 1,9 15,5 15,5 1,5 Part No. CA A l1 l l l d1 d e (pin insert*) Thread max. +0, ±0,7 ±0, max. +0,/ 0,1 ±0,1 CA10E10SL-**P*** 5/-UNEF-A 5,1 1,,0 5, 15,9,1 1, CA10ES-**P*** /-0UNEF-A 5,1 1,,0,0 15,9,1 0,6 CA10E1S-**P*** 7/-0UNEF-A 5,1 1,,0 0,0 19,0,1,0 CA10ES-**P*** 1-0UNEF-A 5,1 1,,0,5,,1,6 CA10E-**P*** 1-0UNEF-A,6 19,0,0,5,,1,6 CA10E1-**P*** 1-1/-1UNEF-A,6 19,0,9 5,0 5,,1 7,0 CA10E0-**P*** 1-1/-1UNEF-A,6 19,0,9,0 9,0,1 9, CA10E-**P*** 1-/-1UNEF-A,6 19,0,9 1,0,,1 1, CA10E-**P*** 1-1/-1UNEF-A 6, 0,6,9,5 5,,7,9 CA10E-**P*** 1-/-1UNS-A 6, 0,6,9 50, 1,,7 9,7 CA10E-**P*** -1UNS-A 7,,,9 57,0 7,6,,5 CA10E6-**P*** -1/-UN-A 7,,,9 6,5 5,, 9, Note: Older versions also used the designation CA10R instead of the CA10E. These parts would be identical but the designation is no longer valid. CA0E CA0E designates a box mounting receptacle for rear panel mounting. It mates with plugs CA106 and CA10. Part No. CA A d1 d l1 l l L e (pin insert*) Thread max. H1 Code: BM9 max. +0, ±0, ±0, ±0,1 CA0E10SL-**-P-*** 5/-UNEF-A 1,5, M 5,1 1,, 5. 1, CA0ES-**-P-*** /-0UNEF-A,1, M 5,1 1,,.0 0,6 CA0E1S-**-P-*** 7/-0UNEF-A 19,, M 5,1 1,, 0.0,0 CA0ES-**-P-*** 1-0UNEF-A,, M 5,1 1,,.5,6 CA0E-**-P-*** 1-0UNEF-A,, M, 1,5,.5,6 CA0E1-**-P-*** 1-1/-1UNEF-A 5,6, M,,05,0 5.0 7,0 CA0E0-**-P-*** 1-1/-1UNEF-A 9,0, M,,05,0.0 9, CA0E-**-P-*** 1-/-1UNEF-A,, M,,05,0 1.0 1, CA0E-**-P-*** 1-1/-1UNEF-A 5,,7 M5,,05,0.5,9 CA0E-**-P-*** 1-/-1UNS-A 1,,7 M5,,05,0 50. 9,7 CA0E-**-P-*** -1UNS-A 7,, M6,,05,0 57.0,5 CA0E6-**-P-*** -1/-UN-A 5,1, M6,,05,0 6.5 9, * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page 0 www.ittcannon.com

CANNON CA THREADED BOX MOUNTING RECEPTACLE PCB VERSION CA0L CA0L designates a box mounting receptacle for front panel mounting with PCB termination. It mates with plugs CA106 and CA10. Available for contact arrangements with # contacts only. For # contacts consult factory. Part No. CA (pin insert*) A d1 d l1 l l l e Thread max. +0,/ 0,1 max. +0, 0, 0, 0,1 CA0L10SL-**-P-*** 5/-UNEF-A 15,9,1 5,1 1,, 5, 1, CA0LS-**-P-*** /-0UNEF-A 15,9,1 5,1 1,,,0 0,6 CA0L1S-**-P-*** 7/-0UNEF-A 19,0,1 5,1 1,, 0,0,0 CA0LS-**-P-*** 1-0UNEF-A,,1 5,1 1,,,5,6 CA0L-**-P-*** 1-0UNEF-A,,1, 19,0,,5,6 CA0L1-**-P-*** 1-1/-1UNEF-A 5,,1, 19,0,0 5,0 7,0 CA0L0-**-P-*** 1-1/-1UNEF-A 9,0,1, 19,0,0,0 9, CA0L-**-P-*** 1-/-1UNEF-A,,1, 19,0,0 1,0 1, CA0L-**-P-*** 1-1/-1UNEF-A 5,,7, 0,6,0,5,9 CA0L-**-P-*** 1-/-1UNS-A 1,,7, 0,6,0 50, 9,7 CA0L-**-P-*** -1UNS-A 7,6,,,,0 57,0,5 CA0L6-**-P-*** -1/-UN-A 5,,,,,0 6,5 9, CA0L CA0L designates a box mounting receptacle for rear panel mounting with PCB termination. It mates with plugs CA106 and CA10. Available for contact arrangements with # contacts only. For # contacts consult factory. Part No. CA (pin insert*) A d1 d l1 l l l e Thread max. H1 (Std.) Code BM9 max. 0, ±0, ±0, ±0,1 CA0L10SL-**-P-*** 5/-UNEF-A 1,5, M 5,1 1,, 5. 1, CA0LS-**-P-*** /-0UNEF-A,1, M 5,1 1,,.0 0,6 CA0L1S-**-P-*** 7/-0UNEF-A 19,, M 5,1 1,, 0.0,0 CA0LS-**-P-*** 1-0UNEF-A,, M 5,1 1,,.5,6 CA0L-**-P-*** 1-0UNEF-A,, M, 1,5,.5,6 CA0L1-**-P-*** 1-1/-1UNEF-A 5,6, M,,05,0 5.0 7,0 CA0L0-**-P-*** 1-1/-1UNEF-A 9,0, M,,05,0.0 9, CA0L-**-P-*** 1-/-1UNEF-A,, M,,05,0 1.0 1, CA0L-**-P-*** 1-1/-1UNEF-A 5,,7 M5,,05,0.5,9 CA0L-**-P-*** 1-/-1UNS-A 1,,7 M5,,05,0 50. 9,7 CA0L-**-P-*** -1UNS-A 7,, M6,,05,0 57.0,5 CA0L6-**-P-*** -1/-UN-A 5,1, M6,,05,0 6.5 9, * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page www.ittcannon.com 1

CANNON CA THREADED STRAIGHT PLUG GENERAL DUTY CLASS E, R CA06R/CA106E CA06R and CA106E are straight plugs. They mate with 100, 10, CA0L, CA0E, CA0L receptacles and 101 plugs. If crimp version is required please order CA106E...F0/F1 (without O-ring) or CA06R...F0/F1 (with O-ring). Part No. CA (pin insert*) A d1 d¹ l1 l Thread max. max. max. CA06R10SL-**P*** 5/-UNEF-B,1 6,5 5,0 115,0 CA06RS-**P*** /-0UNEF-B 5, 6,5 5,0 115,0 CA06R1S-**P*** 7/-0UNEF-B, 9,0 55,0 115,0 CA06RS-**P*** 1-0UNEF-B 1, 11,0 56,0 115,0 CA06R-**P*** 1-0UNEF-B 1, 11,0 66,0 0,0 CA06R1-**P*** 1-1/-1UNEF-B,1 1, 6,0 0,0 CA06R0-**P*** 1-1/-1UNEF-B 7, 15, 6,0 0,0 CA06R-**P*** 1-/-1UNEF-B 0,5 15, 6,0 0,0 CA06R-**P*** 1-1/-1UNEF-B, 1, 76,0 0,0 CA06R-**P*** 1-/-1UNS-B 50, 1, 76,0 0,0 CA06R-**P*** -1UNS-B 56, 6,7 76,0 0,0 CA06R6-**P*** -1/-UN-B 6, 1,7 76,0 10,0 ¹ max. cable dia CA106R The CA106R straight plug has a shorter lightweight backshell than CA106E. It contains an O-ring seal under the coupling nut. CA106R plugs mate with 100, 10, CA0L, CA0E, CA0L receptacles and 101 plugs. If crimp version is required please order CA106R F0, CA106R F1. Part No. CA (pin insert*) A d1 d¹ l1 Thread max. max. CA106R10SL-**P*** 5/-UNEF-B,1 9,6 5,0 CA106RS-**P*** /-0UNEF-B 5, 10, 5,0 CA106R1S-**P*** 7/-0UNEF-B,, 55,0 CA106RS-**P*** 1-0UNEF-B 1, 15, 56,0 CA106R-**P*** 1-0UNEF-B 1, 15, 66,0 CA106R1-**P*** 1-1/-1UNEF-B,1 1, 6,0 CA106R0-**P*** 1-1/-1UNEF-B 7,,0 6,0 CA106R-**P*** 1-/-1UNEF-B 0,5,7 6,0 CA106R-**P*** 1-1/-1UNEF-B, 7,6 76,0 CA106R-**P*** 1-/-1UNS-B 50, 1,6 76,0 CA106R-**P*** -1UNS-B 56,,5 76,0 CA106R6-**P*** -1/-UN-B 6,,5 76,0 * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page ¹ max. cable dia www.ittcannon.com

CANNON CA THREADED STRAIGHT PLUG CLASS F, DN CA106F CA106F designates a straight plug with backshell for flex tubes or to be combined with a cable clamp. It mates with receptacles 100, 10, CA0L, CA0E, CA0L and 101 plugs. Part No. CA A d1 d¹ d l1 l (pin insert*) Thread max. Thread max. min. CA106F10SL-**P 5/-UNEF-B,1, 5/-UNEF-A 5,0 9,5 CA106FS-**P /-0UNEF-B 5,, 5/-0UNEF-A 5,0 9,5 CA106F1S-**P 7/-0UNEF-B, 11,1 /-0UNEF-A 5,0 9,5 CA106FS-**P 1-0UNEF-B 1, 1, 7/-0UNEF-A 5,0 9,5 CA106F-**P 1-0UNEF-B 1, 1, 7/-0UNEF-A 5,0 9,5 CA106F1-**P 1-1/-1UNEF-B,1,7 1-0UNEF-A 5,0 9,5 CA106F0-**P 1-1/-1UNEF-B 7, 19, 1-/-1UNEF-A 55,0 9,5 CA106F-**P 1-/-1UNEF-B 0,5 19, 1-/-1UNEF-A 5,0 9,5 CA106F-**P 1-1/-1UNEF-B, 5, 1-7/-1UNEF-A 59,0 9,5 CA106F-**P 1-/-1UNS-B 50, 7,0 1-7/-1UNEF-A 60,0 9,5 CA106F-**P -1UNS-B 56,,5 1-/-1UNS-A 6,0 11,0 CA106F6-**P -1/-UN-B 6, 5,7-1UNS-A 6,0 11, ¹ max. cable dia CA106E-DN CA106E-DN designates a straight plug with backshell for heat-shrinkable boots. CA106E-DN has an O-ring seal under the coupling nut. It mates with receptacles 100, 10, CA0L, CA0E, CA0L and 101 plugs +/ Part No. CA A d1 d¹ d d l1 l (pin insert*) Thread max. max. ±0, max. ±0,5 CA106E10SL-**P-DN 5/-UNEF-B,1 7,7 1, 15,5 9,0 11,7 CA106ES-**P-DN /-0UNEF-B 5, 7,9 1, 15,5 9,0 11,7 CA106E1S-**P-DN 7/-0UNEF-B, 10,6 17,0 19,1 9,0 11,7 CA106ES-**P-DN 1-0UNEF-B 1, 1,5 1,9,9 9,0 11,7 CA106E-**P-DN 1-0UNEF-B 1, 1,5 1,9,9 5,0 11,5 CA106E1-**P-DN 1-1/-1UNEF-B,1 1,6 1,9,9 5,0 11,5 CA106E0-**P-DN 1-1/-1UNEF-B 7, 1,7 6, 9,6 60,0,7 CA106E-**P-DN 1-/-1UNEF-B 0,5 0, 6, 9,6 60,0,7 CA106E-**P-DN 1-1/-1UNEF-B,,6,5 7, 6,0,7 CA106E-**P-DN 1-/-1UNS-B 50, 7,0,5 7, 6,0,7 CA106E-**P-DN -1UNS-B 56,,,6 7, 67,0 15, CA106E6-**P-DN -1/-UN-B 6,,5,6 7, 6,0 15, * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page ¹ max. cable dia www.ittcannon.com

CANNON CA THREADED STRAIGHT PLUG PG/ME, SHIELDED CA106E -1/-1/-15 CA106E -1/-1/-15 is a shielded straight plug with backshell to accommodate cable braids and heat-shrinkable boots. It has an O-ring under the coupling nut. It mates with receptacles 100E -1/-1/-15, 10, CA0L, CA0E, CA0L and 101-1/-1/-15 plugs. Part No. CA A d1 d¹ d d l1 l1 (pin insert*) Thread max. ±0,5 max. max. max. CA106E10SL-**P** 5/-UNEF-B,1 7,7 1,5, 55,0 55,0 CA106ES-**P** /-0UNEF-B 5, 7,9 0,0 17,0 55,0 55,0 CA106E1S-**P** 7/-0UNEF-B, 10,6,0 0,0 55,0 55,0 CA106ES-**P** 1-0UNEF-B 1, 1,5 5,0,0 60,0 60,0 CA106E-**P** 1-0UNEF-B 1, 1,5 5,0,0 70,0 70,0 CA106E1-**P** 1-1/-1UNEF-B,1 1,6,0,5 70,0 70,0 CA106E0-**P** 1-1/-1UNEF-B 7, 1,6,0,5 70,0 70,0 CA106E-**P** 1-/-1UNEF-B 0,5 0,,0 0,5 70,0 70,0 CA106E-**P** 1-1/-1UNEF-B,,6,0,5 70,0 70,0 CA106E-**P** 1-/-1UNS-B 50, 7,0 1,0 7,5 70,0 70,0 CA106E-**P** -1UNS-B 56,,,0,0 70,0 70,0 CA106E6-**P** -1/-UN-B 6,,5 55,0 51,0 0,0 0,0 ¹ max. cable dia CA06PG/ME CA06PG/ME is a straight plug for usage of PG or metric glands. CA06PG / ME has an O-ring seal under the coupling nut. The cable gland is not content of the delivery. It mates with receptacles 100, 10, CA0L, CA0E, CA0L and 101 plugs. Part No. CA A d1 d l1 (pin insert*) Thread max. PG-Thread Metric max. CA06PG10SL-**P-*** CA06ME10SL-*P-*** 5/-UNEF-B,1 PG9 M 1,5 5,0 CA06PGS-**P-*** CA06MES-**P-*** /-0UNEF-B 5, PG9 M 1,5 5,0 CA06PG1S-**P-*** CA06ME1S-**P-*** 7/-0UNEF-B, PG11 M0 1,5 5,0 CA06PGS-**P-*** CA06MES-*P-*** 1-0UNEF-B 1, PG1,5 M0 1,5 5,0 CA06PG-**P-*** CA06ME-**P-*** 1-0UNEF-B 1, PG1,5 M0 1,5 6,0 CA06PG1-**P-*** CA06ME1-**P-*** 1-1/-1UNEF-B,1 PG1,5 M5 1,5 69,0 CA06PG0-**P-*** CA06ME0-**P-*** 1-1/-1UNEF-B 7, PG M5 1,5 70,0 CA06PG-**P-*** CA06ME-**P-*** 1-/-1UNEF-B 0,5 PG M 1,5 7,0 CA06PG-**P-*** CA06ME-**P-*** 1-1/-1UNEF-B, PG M 1,5 7,0 CA06PG-**P-*** CA06ME-**P-*** 1-/-1UNS-B 50, PG1 M 1,5 7,0 CA06PG-**P-*** CA06ME-**P-*** -1UNS-B 56, PG9 M0 1,5 76,0 CA06PG6-**P-*** CA06ME6-**P-*** -1/-UN-B 6, PG9 M0 1,5 7,0 * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page www.ittcannon.com

CANNON CA THREADED 90 PLUG CA10E CA10E are right angle plugs which mate with receptacles 100, 10, CA0L, CA0E, CA0L and 101 plugs. If crimp version is required please order CA10E F0 (without O-ring), CA10E F1 (without O-ring). Part No. CA A d1 d¹ l1 l l l (pin insert*) Thread max. max. max. max. max. CA10E10SL-**P*** 5/-UNEF-B,1 6,5 5,0,0,7 100 CA10ES-**P*** /-0UNEF-B 5, 6,5 5,0,0,7 100 CA10E1S-**P*** 7/-0UNEF-B, 9,0 7,0,0 7,5 100 CA10ES-**P*** 1-0UNEF-B 1, 11,0,0 5,0 0,0 100 CA10E-**P*** 1-0UNEF-B 1, 11,0,0 5,0 0,0 100 CA10E1-**P*** 1-1/-1UNEF-B,1 1, 5,0 5,0,0 100 CA10E0-**P*** 1-1/-1UNEF-B 7, 15, 61,0 5,0 7,5 100 CA10E-**P*** 1-/-1UNEF-B 0,5 15, 61,0 5,0 7,5 100 CA10E-**P*** 1-1/-1UNEF-B, 1, 66,0 5,0, 100 CA10E-**P*** 1-/-1UNS-B 50, 1, 66,0 5,0, 100 CA10E-**P*** -1UNS-B 56, 6,7 7,0 66,0 51,7 110 CA10E6-**P*** -1/-UN-B 6, 1,7 75,0 69,0 5,0 110 ¹ max. cable dia CA10R CA10R are right angle plugs which mate with receptacles CA100, CA101, CA10, CA0L, CA0E and CA0L. CA 10R comes without cable clamp. If crimp version is required please order CA10R F0 (with O-ring), CA10R F1 (with O-ring). It mates with receptacles 100, 10, CA0L, CA0L and 101 plugs. Part No. CA A d1 d l1 l l (pin insert*) Thread max. Thread max. min. max. CA10R10SL-**P*** 5/-UNEF-B,1 5/-UNEF-A 5,0 9,,0 CA10RS-**P*** /-0UNEF-B 5, 5/-0UNEF-A 5,0 9,,0 CA10R1S-**P*** 7/-0UNEF-B, /-0UNEF-A 7,0 9,,0 CA10RS-**P*** 1-0UNEF-B 1, 7/-0UNEF-A,0 9, 5,0 CA10R-**P*** 1-0UNEF-B 1, 7/-0UNEF-A,0 9, 5,0 CA10R1-**P*** 1-1/-1UNEF-B,1 1-0UNEF-A 5,0 9, 7,0 CA10R0-**P*** 1-1/-1UNEF-B 7, 1-/-1UNEF-A 61,0 9, 9,0 CA10R-**P*** 1-/-1UNEF-B 0,5 1-/-1UNEF-A 61,0 9, 0,0 CA10R-**P*** 1-1/-1UNEF-B, 1-7/-1UNEF-A 66,0 9,,0 CA10R-**P*** 1-/-1UNS-B 50, 1-7/-1UNEF-A 66,0 9,,0 CA10R-**P*** -1UNS-B 56, 1-/-1UNS-A 7,0 11,0 9,5 CA10R6-**P*** -1/-UN-B 6, -1UNS-A 75,0,6 5,0 * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page ¹ max. cable dia www.ittcannon.com 5

CANNON CA/TBF THREADED STRAIGHT PLUG ENFORCED BACKSHELL, THROUGH-BULKHEAD CLASS E, R CA06EA CA06EA is a straight plug with adapter for gland nut sealing and cable clamp. It is designed for usage with jacketed cable. It provides cable strain relief, individual wire sealing plus sealing of the outer cable jacket. It has an O-ring under the coupling nut. It mates with receptacles 100, 10, CA0L, CA0E, CA0L and 101 plugs Part No. CA A d1 d d¹ l1 (pin insert*) Thread max. max. max. CA06EA1S-**P*** 7/-0UNEF-B,, 11, 10,0 CA06EAS-**P*** 1-0UNEF-B 1, 7, 1,5 10,0 CA06EA-**P*** 1-0UNEF-B 1, 7, 1,5 1,0 CA06EA1-**P*** 1-1/-1UNEF-B,1, 15,9 1,0 CA06EA0-**P*** 1-1/-1UNEF-B 7, 5, 19,1 1,0 CA06EA-**P*** 1-/-1UNEF-B 0,5 7, 19,1 1,0 CA06EA-**P*** 1-1/-1UNEF-B,6 1,,9 115,0 CA06EA-**P*** 1-/-1UNS-B 50, 7,,9 115,0 CA06EA-**P*** -1UNS-B 56, 5, 1, 0,0 CA06EA6-**P*** -1/-UN-B 6, 59,,9 0,0 ¹ max. cable dia THRU-BULKHEADT TBF TBF designates a thru-bulkhead featured by a double face construction allowing mating from both ends. It mates with 106 and 10 plugs. Socket side Pin side Part No. TBF A l1 l l e d Thread max. +0, ±0, ±0,1 +0,/ 0,1 TBF10SL-**-**PS*** 5/-UNEF-A 0,1 1, 5, 1,,1 TBF1S-**-**PS*** 7/-0UNEF-A 0,1 1, 0,0,0,1 TBFS-**-**PS*** 1-0UNEF-A 0,1 1,,5,6,1 TBF-**-**PS*** 1-0UNEF-A 5, 19,0,5 9,,1 TBF1-**-**PS*** 1-1/-1UNEF-A 5, 19,0 5,0 1,,1 TBF0-**-**PS*** 1-1/-1UNEF-A 5, 19,0,0 9,,1 TBF-**-**PS*** 1-/-1UNEF-A 5, 19,0 1,0 1,,1 TBF-**-**PS*** 1-1/-1UNEF-A 5, 0,6,5,9,7 TBF-**-**PS*** 1-/-1UNS-A 5, 0,6 50, 9,7,7 TBF-**-**PS*** -1UNS-A 5,, 57,0,5, TBF6-**-**PS*** -1/-UN-A 5,, 6,5 9,, * For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-1 *** Add modification code; see page 6 www.ittcannon.com

ACCESSORIES Cable Clamp These cable clamps can be used with or without bushings. Bushings need to be ordered separetely, please see table below.. It is utilized to complete the F class plugs and receptacles on page 5,, and CA10 90 plug on page 5. Part No. CA Shell size A d1 l1 l Thread max max max VG95KK 10S, S, 5/-NEF-B 7,9 0,,5 VG95KK 6 1S, 1 /-0UNEF-B 11,1, 7, VG95KK S, 7/-0UNEF-B 1,,0 9, VG95KK10 1 1-0UNEF-B 15,,0, VG95KK 0, 1-/-1UNEF-B 19,0,0 7, VG95KK, 1-7/-1UNEF-B,7 6,,5 VG95KK0 1-/-1NS-B 1,,0 51,7 VG95KK 6-1NS-B,6 9,6 57, TELESCOPING BUSHING Telescoping bushings (used with cable clamp) keep dirt, moisture out of backshell. Taping or wrapping wires is eliminated since bushing protects wires going through clamp. Combination of bushings may be used to decrease cable entry diameter to improve sealing. Material is Polychloroprene. Shell size part no. d1 d d I Weight g 10SL 0-55-000.0 6.6 9.9 70.0 1S 0-55-000 10.9 9.1.7 67.0 5 S, 0-01-000 1.0 11.1 19.0 6.0 6 1 0-019-000 15.7 1..0 60.0 0, 0-00-000 1. 15.9 6.9 57.0 7, 0-556-000.6 1.5. 5.0 1 0-55-000 1.5 6. 0. 51.0 6 6 0-0-000.7 1. 6..0 0. 0-555-000 1..6 6.9 57.0 1 0-557-000 6.5 1.5. 5.0 6 Shell size Combination of:, 0-556-000 and 0-555-000 0-55-000 and 0-557-000 6 0-0-000 and 0-55-000 www.ittcannon.com 7

ACCESSORIES METAL PROTECTING CAPS FOR RECEPTACLES WITH CORD Shell Size Order designation ØA D ØE F ØG H A66 A0 Thread max. max. ca. +0, max. 10SL CA100-01 CA100-1 5/-UNEF-B 11.7 0. 100..0 S CA100-0 CA100- /-0UNEF-B 11.7. 115..0 1S CA100-0 CA100-7/-0UNEF-B 11.7 6.6 115..0 S, CA100-0 CA100-1-0UNEF-B 11.7 9. 115..0 1 CA100-06 CA100-6 1 1/-1UNEF-B 11.7.9 115..0 0 CA100-07 CA100-7 1 1/-1UNEF-B 11.7 6.1 5..0 CA100-0 CA100-1 /-1UNEF-B 11.7 9. 5..0 CA100-09 CA100-9 1 1/-1UNEF-B 11.7.6 10..0 CA100-10 CA100-90 1 /-1UNS-B 1..9 00. 1.0 CA100-11 CA100-91 -1UNS-B 1. 55. 00.6 1.0 6 CA100- CA100-9 1/-UN-B 1. 61.6 00.6 1.0 METAL PROTECTING CAPS FOR RECEPTACLES WITH CHAIN Shell Order designation ØA D ØE F ØG H Size A66 A A A0 Thread max. max. ca. +0, max. 10SL CA09-5101 CA100-61 CA100-61 CA100-61 5/-UNEF-B 11.7 0. 100..0 S CA09-510 CA100-6 CA100-6 CA100-6 /-0UNEF-B 11.7. 115..0 1S CA09-510 CA100-6 CA100-6 CA100-6 7/-0UNEF-B 11.7 6.6 115..0 S, CA09-510 CA100-6 CA100-6 CA100-6 1-0UNEF-B 11.7 9. 115..0 1 CA09-5105 CA100-66 CA100-66 CA100-66 1 1/-1UNEF-B 11.7.9 115..0 0 CA09-5106 CA100-67 CA100-67 CA100-67 1 1/-1UNEF-B 11.7 6.1 5..0 CA09-5107 CA100-6 CA100-6 CA100-6 1 /-1UNEF-B 11.7 9. 5..0 CA09-510 CA100-69 CA100-69 CA100-69 1 1/-1UNEF-B 11.7.6 10..0 CA09-5109 CA100-650 CA100-60 CA100-690 1 /-1UNS-B 1..9 00. 1.0 CA09-5110 CA100-651 CA100-61 CA100-691 -1UNS-B 1. 55. 00.6 1.0 6 CA09-5111 CA100-65 CA100-6 CA100-69 1/-UN-B 1. 61.6 00.6 1.0 www.ittcannon.com

ACCESSORIES METAL PROTECTING CAPS FOR PLUGS WITH CORD Shell Size Order designation ØA C D ØE ØF G ØH I A66 A0 Thread ±0,5 max. +0, max. ca. +0, max. 10SL CA100-01 CA100-1 5/-UNEF-A 1.1. 11.5.7 100. 0.5 S CA100-0 CA100- /-0UNEF-A 1.9 1.0 1. 19. 115. 5.0 1S CA100-0 CA100-7/-0UNEF-A 1.9 1.0 17.6.0 115. 5.0 S, CA100-0 CA100-1-0UNEF-A 1.9 1.0 0. 6. 115. 5.0 1 CA100-06 CA100-6 1 1/-1UNEF-A 1.9 1.0.9 9. 115. 5.0 0 CA100-07 CA100-7 1 1/-1UNEF-A 1.9 1.0 7.1.5 5.6 5.0 CA100-0 CA100-1 /-1UNEF-A 1.9 1.0 0. 5.7 5.6 5.0 CA100-09 CA100-9 1 1/-1UNEF-A 1.9 1.0.5.9 10.6 5.0 CA100-10 CA100-90 1 /-1UNS-A 1.9 1.0 9.0 5. 00.6 5.0 CA100-11 CA100-91 -1UNS-A 1.9 1.0 5. 51.6 00 5. 5.0 6 CA100- CA100-9 1/-UN-A 1.9 1.0 50.9 57.9 00 5. 5.0 METAL PROTECTING CAPS FOR PLUGS WITH CHAIN Shell Size Order designation ØA C D ØE ØF G ØH I A66 A A A0 Thread ±0,5 max. +0, max. ca. +0, max. 10SL CA1750-5101 CA100-61 CA100-61 CA100-61 5/-UNEF-A 1.1. 11.5.7 100. 0.5 S CA1750-510 CA100-6 CA100-6 CA100-6 /-0UNEF-A 1.9 1.0 1. 19. 115. 5.0 1S CA1750-510 CA100-6 CA100-6 CA100-6 7/-0UNEF-A 1.9 1.0 17.6.0 115. 5.0 S, CA1750-510 CA100-6 CA100-6 CA100-6 1-0UNEF-A 1.9 1.0 0. 6. 115. 5.0 1 CA1750-5105 CA100-66 CA100-66 CA100-66 1 1/-1UNEF-A 1.9 1.0.9 9. 115. 5.0 0 CA1750-5106 CA100-67 CA100-67 CA100-67 1 1/-1UNEF-A 1.9 1.0 7.1.5 5.6 5.0 CA1750-5107 CA100-6 CA100-6 CA100-6 1 /-1UNEF-A 1.9 1.0 0. 5.7 5.6 5.0 CA1750-510 Ca100-69 CA100-69 CA100-69 1 1/-1UNEF-A 1.9 1.0.5.9 10.6 5.0 CA1750-5109 CA100-650 CA100-60 CA100-690 1 /-1UNS-A 1.9 1.0 9.0 5. 00.6 5.0 CA1750-5110 CA100-651 CA100-61 CA100-691 -1UNS-A 1.9 1.0 5. 51.6 00 5. 5.0 6 CA1750-5111 CA100-65 CA100-6 CA100-69 1/-UN-A 1.9 1.0 50.9 57.9 00 5. 5.0 www.ittcannon.com 9

ACCESSORIES PROTECTIVE CAPS PLASTIC* Material: Polyethene Color: Red Part No. CA CA d1 l1 d d Part No. CA CA d1 l1 d d 100/101/10 106/10 max. max. ±0, max. 100/101/10 106/10 max. max. ±0, max. 05-060-000 10SL 1,5 17, 15,,9 05-06-000 0,1 17, 1,5, 05-077-000 10SL 0,,5 1,0 15,7 05-069-000 9,1 1,6,6, 05-07-000 S,,1 1,6, 1,5 05-06-000 1, 17,,5 6,5 05-06-000 S,,7 17, 1,5 0, 05-07-000, 1,6 5,5 7, 05-079-000 1S, 1 6, 1,6 19,9 1,6 05-0510-000, 17, 7, 9, 05-06-000 1S, 1 7, 17, 1,6, 05-0-000, 1,6 1,6,5 05-00-000 S, 9,5 1,6,1, 05-0501-000 50, 17,,9 5,9 05-09-000 S, 1,5 17, 5,1 6, 05-09-000 5, 1,6,0 9,9 05-0-000 1, 1,6 5,9 7, 05-050-000 57,0 17, 50, 5, 05-0507-000 1,7 17,, 0,1 05-090-000 6 61, 1,6 5, 56, 05-067-000 0 5, 17,, 0, 05-050-000 6 6, 17, 56,6 5,6 *Dust caps for the connector mating side only WIRE HOLE FILLERS Where contacts are not engaged, the contact cavities are to be closed with wire hole fillers. Wire hole fillers are inserted into the rear end of the grommet (see CA-B Assembly instruction available on the ITT webpage www.ittcannon.com) For contact size d1 d l1 l Part number Color AWG metric ±0,1 ±0, ±0,1 ±0, 0 10,,0, 9,7 5-1000-000 red S 15S,,7 1,5, 5-510-000 nature 15,,7, 11,9 5-0017-000 blue 5,7,6, 11,9 5-001-000 yellow 60/100 5,0 5,, 11,9 5-0019-000 white 0 7,6,5, 11,9 5-50-000 green 0 500, 1,5, 11,9 5-50-000 black 0 www.ittcannon.com

ACCESSORIES SEALING GASKETS For front and rear panel mounting. These sealing gaskets made of neoprene are used with flange receptacles for sealing purposes between the shell and the flange. Part No. Shell size d1 d l1 e +0, +0, ±0, ±0,1 075-5-000 10SL 15,7, 5, 1, 075-51-000 S 1,9,,0 0,6 075-51-000 1S,1, 0,0,0 075-515-000 S, 5,,,5,6 075-5-000 1,, 5,0 7,0 075-517-000 0 1,6,,0 9, 075-51-000,, 1,0 1, 075-519-000,0,,5,9 075-50-000, 5,1 50, 9,7 075-51-000 50,7 5,1 57,0,5 075-5-000 6 57,0 5,1 6,5 9, Dummy Receptacle The dummy receptacle holds 106 or 10 plugs when not in use. Material: Aluminum alloy, finish is olive drab chromate over cadmium. Part No. CA for shell size A l1 l l d1 e Thread max ±0, ±0,7 +0,/ 0,1 ±0,1-009-001 10SL 5/-UNEF-B 17,, 5,,1 1, -077-000 S /-0UNEF-B 17,,,7,1 0,6-009-001 1S 7/-0UNEF-B 17,9, 0,1,1,0-0095-001 S 1-0UNEF-B 17,,,5,1,6-009-001 1-0UNEF-B,0,,5,1,6-0096-001 1 1-1/-1UNEF-B,5,0,9,1 7,0-077-000 0 1-1/-1UNEF-B,5,0,0,1 9, -077-000 1-/-1UNEF-B,5,0 1,,1 1, -0099-001 1-1/-1UNEF-B,1,0,,7,9-0100-001 1-/-1UNS-B,1,0 50,,7 9,7-0101-001-1UNS-B 7,0, 57,1,,5-010-001 6-1/-UN-B 7,0, 6,, 9, www.ittcannon.com 1

ACCESSORIES CONTACTS Standard contacts and contacts with reduced termination diameter SIZE 15S/S, 15/, 5/, 60/100/, 0/, 500/0 SIZE 10/0 Pin contacts Finish: A6 silver plated and passivated / A176 gold plated Contact size Termination size Part no. with finish d1 d d6 d7 l1 l Color code mm² AWG A6 A176 0,05 ± 0,15 ± 0,5 10/0 0,5 1,0 0 /1 00-55-000 00-55-006 1,0 1,50 1,50,0,,75 0, 0, 6 / 00-55-010 00-55-0 1,0 1,50 0,90,0,,75 blue 15S /S 0,75 1,5 1 / 00-56-000 00-56-006 1,60 1,75 1,75,75 7,,5 0, 0,6 /0 0-7-000 0-7-006 1,60 1,75 1,0,75 7,,5 red 0,1 0, /6 00-56-010 00-56-0 1,60 1,75 0,90,75 7,,5 blue 15 / 0,75 1,5 1 / 00-57-000 00-57-006 1,60 1,75 1,75,75 1, 7,90 0, 0,6 /0 0-659-000 00-559-006 1,60 1,75 1,0,75 1, 7,90 red 0,1 0, /6 00-57-00 00-57-06 1,60 1,75 0,90,75 1, 7,90 blue 5 /,0,0 1 / 00-5-000 00-5-006,0,0,50,0 7,0 7,90 0,75 1,5 1 / 00-5-010 00-5-0,0,0 1,75,0 7,0 7,90 black,0 00-5-05,0,0,0,0 7,0 7,90 60/100/ 00-6-000 00-6-006,60 6,5,55 6,0 9,6 6,5 6,0 10 00-59-000,60 6,5,50 6,0 9,6 6,5 yellow 10,0 00-590-000,60 6,5,0 6,0 9,6 6,5,0,0 1 / 00-6-010,60 6,5,50 6,0 9,6 6,5 green 0/ 00-61-000 5,75 9,55 7,10 9,55 9,6 6,5,0 00-591-000 5,75 9,55 6,0 9,55 9,6 6,5 10,0 00-591-00 5,75 9,55,0 9,55 9,6 6,5 6 00-61-010 5,75 9,55 5,70 9,55 9,6 6,5 brown 500/0 0 00-61-000 9,10 1,55 11,5 1,5 1,0 6,5 50,0 00-59-000 9,10 1,55 10,7 1,5 1,0 6,5 5,0 00-61-010 9,10 1,55 7,60 1,5 1,0 6,5 white 5,0 00-61-00 9,10 1,55 9,10 1,5 1,0 6,5 grey,0 00-61-00 9,10 1,55 6,0 1,5 1,0 6,5 www.ittcannon.com

ACCESSORIES CONTACTS Standard contacts and contacts with reduced termination diameter SIZE 10/0 SIZE 5/ SIZE 15S/S 15/ SIZE 60/100/ 0/ 500/0 Socket contacts Finish: A6 silver plated and passivated / A176 gold plated Contact size Wire size Part no. with finish d1 d d d5 d6 l1 l Color code mm² AWG A6 A176 + 0,05 ± 0, ± 0,1 10/0 0,5 1,0 0/1 01-55-000 01-55-006,0 1,07 1,5 1,5, 6, ± 0,,75 0, 0, 6/ 01-55-010 01-55-0,0 1,07 1,5 0,9, 6, ± 0,,75 blue 15S /S 0,75 1,5 1 / 01-555-110 01-555-115, 1,65 1,75 1,75,75 9,1,9 0, 0,6 /0 01-6-110 01-6-115, 1,65 1,75 1,,75 9,1,9 red 0,1 0, /6 01-555-10 01-555-15, 1,65 1,75 0,9,75 9,1,9 blue 15 / 0,75 1,5 1 / 01-556-110 01-556-115, 1,65 1,75 1,75,75 7, 7,9 0, 0,6 /0 01-69-0 01-69-115, 1,65 1,75 1,,75 7, 7,9 red 0,1 0, /6 01-556-10 01-556-15, 1,65 1,75 0,9,75 7, 7,9 blue 5 /,0,0 1/ 01-557-000 01-557-006,,5,,5, 7,0 7,9 0,75 1,5 1/ 01-557-00 01-557-06,,5, 1,75, 7,0 7,9 black,0 01-557-010,,5,,, 7,0 7,9 0, 0,6 /0 01-557-00,,5, 1,,75 7,0 7,9 60/100/ 01-519-000 01-519-006 6,5,65 6,5,55 6, 0,1 6,5 6,0 10 01-55-000 6,5,65 6,5,5 6, 0,1 6,5 yellow 10,0 01-559-000 6,5,65 6,5, 6, 0,1 6,5,0,0 1 / 01-519-010 6,5,65 6,5,5 6, 0,1 6,5 green 0/ 01-50-000,6 5, 9,55 7,1 9,55 0,1 6,5,0 01-560-000,6 5, 9,55 6, 9,55 0,1 6,5 10,0 01-560-00,6 5, 9,55, 9,55 0,1 6,5 6 01-50-010,6 5, 9,55 5,7 9,55 0,1 6,5 brown 500/0 0 01-51-000 1, 9,15 1,55 11,5 1,5 1,6 6,5 50,0 01-561-000 1, 9,15 1,55 10,7 1,5 1,6 6,5 5,0 01-51-010 1, 9,15 1,55 7,6 1,5 1,6 6,5 white 5,0 01-51-00 1, 9,15 1,55 9,1 1,5 1,6 6,5 grey,0 01-51-00 1, 9,15 1,55 6, 1,5 1,6 6,5 www.ittcannon.com

CA Layout Overview with standard contact wire size The table below shows all available contact arrangements (layouts) available for ITT s CA product line. For each layout the crimp contact styles and wire cross sections used as default are shown. If other crimp sizes are required the connector can be ordered with suffix -F0 (without contacts). See ordering key on page for details. In this case, separate contacts can be selected according to contact selection tables on pages -. *The numbers represent modifications for contact termination as listed on page. E.g. CA106E0-9S-1 is the modification for a shielded endbell with metric crimp contacts. Layout No. of Contact Contact Termination* Contacts size -F1, -1 -F0, -15 wire size mm² wire size AWG 10SL- 15S/S 0,75-1,5 1/ 10SL- 15S/S 0,75-1,5 1/ S- 15S/S 0,75-1,5 1/ S- 1 15S/S 0,75-1,5 1/ SA10 15S/S 0,75-1,5 1/ 1S-1 15S/S 0,75-1,5 1/ 1S- 15S/S 0,75-1,5 1/ 1S- 1 15S/S 0,75-1,5 1/ 1S-5 5 15S/S 0,75-1,5 1/ 1S-6 6 15S/S 0,75-1,5 1/ 1S-7 15S/S 0,75-1,5 1/ 1S-9 15S/S 0,75-1,5 1/ 1SA7 7 15S/S 0,75-1,5 1/ S-1 7 15S/S 0,75-1,5 1/ S- 15S/S 0,75-1,5 1/ S-5 15S/S 0,75-1,5 1/ S- 5 15S/S 0,75-1,5 1/ -7 15/ 0,75-1,5 1/ 1 60/100/ 10.0-9 15/ 0,75-1,5 1/ 5/,0-,0 1/ -10 5/,0-,0 1/ -11 5/,0-,0 1/ - 1 0/.0 A11 5/,0-,0 1/ 1-1 10 15/ 0,75-1,5 1/ 1-5/,0-,0 1/ 1-15/ 0,75-1,5 1/ 1-5 5/,0-,0 1/ 1 15/ 0,75-1,5 1/ 1-6 1 0/.0 1-7 1 60/100/ 10.0 1-1 5/,0-,0 1/ 7 15/ 0,75-1,5 1/ 1-9 5 15/ 0,75-1,5 1/ Layout No. of Contact Contact Termination* Contacts size -F1, -1 -F0, -15 wire size mm² wire size AWG 5/,0-,0 1/ 1-10 5/,0-,0 1/ 1-11 5 5/,0-,0 1/ 1-6 15/ 0,75-1,5 1/ 1-1 5/,0-,0 1/ 1 60/100/ 10.0 1-17 5/,0-,0 1/ 5 15/ 0,75-1,5 1/ 1-19 10 15/ 0,75-1,5 1/ 1-0 5 15/ 0,75-1,5 1/ 1-1 5/,0-,0 1/ 1-15/ 0,75-1,5 1/ 0-1 500/0 50.0 0 0-5/,0-,0 1/ 0-5/,0-,0 1/ 0-6 15/ 0,75-1,5 1/ 0-7 15/ 0,75-1,5 1/ 0-15/ 0,75-1,5 1/ 60/100/ 10.0 0-11 1 15/ 0,75-1,5 1/ 0-1 5/,0-,0 1/ 60/100/ 10.0 0-15 7 5/,0-,0 1/ 0-5/,0-,0 1/ 7 15/ 0,75-1,5 1/ 0-17 5 5/,0-,0 1/ 1 15/ 0,75-1,5 1/ 0-1 5/,0-,0 1/ 6 15/ 0,75-1,5 1/ 0-19 60/100/ 10.0 0-15/ 0,75-1,5 1/ 60/100/ 10.0 0-60/100/ 10.0 0-15/ 0,75-1,5 1/ 60/100/ 10.0 0-7 1 15/ 0,75-1,5 1/ 0-9 17 15/ 0,75-1,5 1/ 0-11 15/ 0,75-1,5 1/ 0A9 9 5/,0-,0 1/ 0A 15/ 0,75-1,5 1/ 0A 19 15/ 0,75-1,5 1/ -1 60/100/ 10.0-60/100/ 10.0-5/,0-,0 1/ 60/100/ 10.0-5 5/,0-,0 1/ 15/ 0,75-1,5 1/ -7 1 500/0 50.0 0-5/,0-,0 1/ -9 5/,0-,0 1/ -10 15/ 0,75-1,5 1/ - 60/100/ 10.0 15/ 0,75-1,5 1/ -1 19 15/ 0,75-1,5 1/ -15 5 5/,0-,0 1/ 1 15/ 0,75-1,5 1/ www.ittcannon.com

Layout No. of Contact Contact Termination* Contacts size -F1, -1 -F0, -15 wire size mm² wire size AWG - 5/,0-,0 1/ 6 15/ 0,75-1,5 1/ -19 1 15/ 0,75-1,5 1/ -0 9 15/ 0,75-1,5 1/ -1 15/ 0,75-1,5 1/ 1 500/0 50.0 0-60/100/ 10.0-5/,0-,0 1/ -7 1 60/100/ 10.0 15/ 0,75-1,5 1/ - 7 5/,0-,0 1/ - 7 5/,0-,0 1/ - 1 500/0 50.0 0 15/ 0,75-1,5 1/ -5 15/ 0,75-1,5 1/ -6 5/,0-,0 1/ -7 5/,0-,0 1/ 1 15/ 0,75-1,5 1/ -9 0/.0-10 7 60/100/ 10.0-11 6 5/,0-,0 1/ 60/100/ 10.0 - - 5/,0-,0 1/ 0/.0-19 15/ 0,75-1,5 1/ -0 5/,0-,0 1/ 9 15/ 0,75-0,5 1/ - 60/100/ 10.0-7 7 15/ 0,75-1,5 1/ - 15/ 0,75-1,5 1/ A 5/,0-,0 1/ A 15/ 0,75-1,5 1/ A51 1 15/ 0,75-1,5 1/ 5 5/,0-,0 1/ 1 60/100/ 10.0-15/ 0,75-1,5 1/ 5/,0-,0 1/ -5 15/ 0,75-1,5 1/ 0/.0 1 5/,0-,0 1/ -9 6 15/ 0,75-1,5 1/ 6 5/,0-,0 1/ -10 0/.0 60/100/ 10.0 5/,0-,0 1/ -11 1 15/ 0,75-1,5 1/ 5/,0-,0 1/ - 6 15/ 0,75-1,5 1/ -15 5 15/ 0,75-1,5 1/ - 0 15/ 0,75-1,5 1/ -19 6 15/ 0,75-1,5 1/ 5/,0-,0 1/ -0 15/ 0,75-1,5 1/ 10 5/,0-,0 1/ -1 7 15/ 0,75-1,5 1/ - 0/.0 Layout No. of Contact Contact Termination* Contacts size -F1, -1 -F0, -15 wire size mm² wire size AWG 15/ 0,75-1,5 1/ -51 5/,0-,0 1/ A 0/.0 5 15/ 0,75-1,5 1/ A51 15/ 0,75-1,5 1/ A6 19 15/ 0,75-1,5 1/ 9 5/,0-,0 1/ -1 5/,0-,0 1/ 500/0 50.0 0-5 500/0 50.0 0-6 15/ 0,75-1,5 1/ 5/,0-,0 1/ 60/100/ 10.0 0/.0-7 15/ 0,75-1,5 1/ 7 5/,0-,0 1/ - 6 5/,0-,0 1/ 15/ 0,75-1,5 1/ -9 15/ 0,75-1,5 1/ 0/ -1 5 5/,0-,0 1/ 1 15/ 0,75-1,5 1/ -15 6 5/,0-,0 1/ 500/0 50.0 0-17 0/.0 A10 5 15/ 0,75-1,5 1/ A7 7 15/ 0,75-1,5 1/ A55 55 15/ 0,75-1,5 1/ A69 1 10/0 0,5-1,0 0/1 0 15/ 0,75-1,5 1/ 6-500/0 50.0 0 5/,0-,0 1/ 6-5 500/0 50.0 0 6-6 0/.0 500/0 50.0 0 6-7 7 5/,0-,0 1/ 0 15/ 0,75-1,5 1/ 6-1 5/,0-,0 1/ 6 15/ 0,75-1,5 1/ 6-9 1 15/ 0,75-1,5 1/ 1 5/,0-,0 1/ 60/100/ 10.0 1 0/.0 6-10 15/ 0,75-1,5 1/ 6-1 5 60/100/ 10.0 5 5/,0-,0 1/ 6 15/ 0,75-1,5 1/ 6-15 5 15/ 0,75-1,5 1/ 6A 5 15/ 0,75-1,5 1/ 6A5 15/ 0,75-1,5 1/ 500/0 50.0 0 6A6 7 5/,0-,0 1/ 6A9 60/100/ 10 1 15/ 0,75-1,5 1/ 6A99 15 15/ 0,75-1,5 1/ 50 10/0 0,-0, 6/ www.ittcannon.com 5

Tools Crimp Tools For pin and socket contacts according VG95 and for Cannon contacts with reduced coupling dimensions. Contact Size Wire size mm AWG 10 0,5-1,0 0/1 0,-0, 6/ 0,75-1,5 1/ 0,-0,6 /0 0,1-0, /6 0,750-1,5 1/ 0,-0,6 /0 0,1-0, /6 0,75-1,5 1/ 0,-0,6 /0 0,1-0, /6,0-,0 1/ 0,75-1,5 1/ Contact Size Wire size mm AWG 60/100/ 6,0-,0 10 1/ 0/ 10 6 500/0 50 5 5 0 - Socket Pin 15S/S 15S/S 15/ 5/ Hand Crimp Tools M50-1-01 Order Reference Crimp Locator Order Reference 6005 156-00 TH 5 995-000-05 995-0001-55 Hydraulic Handpump Order Number Electro Hydraulic Tool Order Number HPW00U-ITT 156-557 HP00EL-ITT 156-55 Insertion & Extraction Tools Crimp contacts should be inserted or, if needed, extracted with the correct tools. In order to avoid damage to the insulator it is recommended to use guide pins for the insertion of socket contacts. Insertion Tools Part No. Order Reference Insertion Pliers Part No. Order Reference Extraction Tools Part No. Order Reference Guiding Pins for Socket Contacts CIT 0 106-009 CIT-F0-0 106-009 CET-F0-0 106-00 CIT 106-00 CIT-F0-106-0097 CET-F0-106-001 7977-T50 CIT 106-007 CIT-F0-106-0096 CET-F0-106-000 7977-T CIT 106-0095 CET- 106-0079 CIT 106-009 CET- 106-007 CIT 0 106-009 CET-0 106-0077 6 www.ittcannon.com

Basic - Hydraulic - Electrically driven tool - Version A Basic - Hydraulic - Manual Operated tool - Version B H- Crimp Head Pump Handle with Reset Function H- Crimp Head Electro Hydraulic Crimp Tool Foot Pedal Handle Basic Manual operated crimp tool Version C Version Description Marking Part Number A Electro-Hydraulic Crimp tool set with foot pedal, hand control and crimp head HP700EL-ITT 156-579 A (Accessory) Switch mode power supply SNT-ITT 156-50 A (Accessory) Lithium Ion Battery 1V A with recharger LGA-ITT 156-51 B Manually operated Hydraulic handtool HPW00U-ITT 156-557 C Hand Crimp Tool M50-1-01 995-0001-55 Crimp tool and Bench mount Foot pedal Gauge Description Marking Part Number Pneumatic crimp tool (AWG - 0) WA7F-CE 156-5067 Bench mount BM- 156-506 Foot pedal WA10 156-5069 Gauge M50--1 995-0001-6 Crimp Dies Product Contact Size Part Number Hex. Diameter Stamped label Crimp die Cable Size AWG mm 60/100/ 156-51 5,0 01 6/10 0/ 156-50 7,5 0 500/0 156-59 11,0 0 0 50 Locator MS / CA 156-5 Notes 1. For insertion and extraction of the contacts and for connector assembly see Assembly instructions CAS509. Standard contacts acc. to VG95 Crimp die with locator Crimp die Locator www.ittcannon.com 7