ullet Valve (V) Series VERY FEW PARTS LONG LIFE LIFTING SOLENOID ONE PIECE POPPET / ARMATURE ALANCED DESIGN SOLENOID ISOLATED FROM CONTAMINATED AIR UNIQUE MOUNTING D-SEAL TECHNOLOGY LONG LIFE LIFTING SOLENOID STRONG RETURN SPRING ONE PIECE POPPET/ARMATURE
Up to 0.07 Cv 2/2 Cartridge V209A 1. Short stroke with high shifting forces 2. alanced poppet, immune to pressure fluctuations 3. Precise repeatability 4. Solenoid isolated from contaminated air 5. Very few parts 6. Extremely long life 7. Unique mounting - no fasteners or screws required VALVE Type 2 Way Cartridge (Standard) V209A-CA1-00-xxxx-xxx Cartridge (Axial Flow) V209A-CG0-00-xxxx-xxx SOLENOID OPERATOR X XX X - X XX Solenoid Voltage GC GE GH GK MC ME MH MK Round Lead wire length (2.5W) (4.0W) (2.5W) (4.0W) (2.5W) (4.0W) (2.5W) (4.0W) 0 A C D E F H No lead wire 18 24 36 48 72 96 144 Solenoid can (round) C For Top Cover Option and Can w/ Outer Threads *High wattage - high speed options - consult factory Solenoid cover JST Connector Flying Leads TA No ground wire A TC locking & suppr. C diode & LED (no ground) TE locking & suppr. E diode (no ground) TG LED (no ground) G TJ MOV (no ground) J TL LED & MOV L (no ground) ** ERC - Energy Reduction Circuitry - Reduces the effective wattage at continuous duty ERC wattage reduction options - consult factory CIRCUIT AR ullet valve type Cyl. port size Spacing (mm) Side cylinder port ottom cylinder port #10-32 UNF 11 CCMV09A-00AAA-xx CCMV09A-00AA-xx M5 11 CCMV09A-00AA-xx CCMV09A-00A-xx M7 11 CCMV09A-00AAC-xx CCMV09A-00AC-xx #10-32 UNF 11 - CCMV09A-00DA-xx M5 11 - CCMV09A-00D-xx M7 11 - CCMV09A-00DC-xx Standard xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers.
Fluid: Compressed air, vacuum, inert gases Pressure range: Lubrication: Vacuum to 120 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) Filtration: 40µ Temperature range: 0 F to 120 F (-18 C to +50 C) Up to 0.07 Cv Voltage range: -15% to +10% of nominal voltage Tools: Manifold cavity step reamer: T-6961 Insertion/removal socket: AT-1180 (it) AT-1185 (it Holder) AT-1184 (Handle) ullet Valve with JST Cover and Circuit oard for LED., MOV., & Diode Options V209A (2-way) - Standard Watt CCMV09A - Side ports
3/2 NC, Universal Up to 0.06 Cv Cartridge V309A 1. Short stroke with high shifting forces 3. Precise repeatability 4. Solenoid isolated from contaminated air 5. Very few parts 6. Extremely long life 7. Unique mounting - no fasteners or screws required VALVE Type 3 Way N.C. Cartridge 2 3 1 3 1 V309A-CD1-00-xxxx-xxx X XX X - X XX Solenoid Voltage GA G GC GD GE GF GG GH GJ GK Round 2 V309A-CC1-00-xxxx-xxx SOLENOID OPERATOR 3 Way Universal Lead wire length (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) 0 A C D E F H No lead wire 18 24 36 48 72 96 144 Solenoid can (round) C For Top Cover Option and Can w/ Outer Threads * High wattage - high speed options - consult factory ** ERC wattage reduction options - consult factory Solenoid cover JST Connector Flying Leads TA No ground wire A TC locking & suppr. C diode & LED (no ground) TE locking & suppr. E diode (no ground) TG LED (no ground) G TJ MOV (no ground) J TL LED & MOV L (no ground) CIRCUIT AR Port size Spacing (mm) Side cylinder port # 10-32 UNF 11 CCMV09A-00AA-xx M5 11 CCMV09A-00A-xx M7 11 CCMV09A-00AC-xx xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers. ** ERC - Energy Reduction Circuitry - Reduces the effective wattage at continuous duty.
Fluid: Pressure range: Compressed air, vacuum, inert gases Vacuum to 120 PSI Lubrication: Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) 40µ Filtration: Temperature range: Voltage range: 0 F to 120 F (-18 C to +50 C) Up to 0.06 Cv -15% to +10% of nominal voltage Tools: Manifold cavity step reamer: T-6962 Insertion/removal socket: AT-1180 (it) AT-1185 (it Holder) AT-1184 (Handle) ullet Valve with JST Cover and Circuit oard for LED., MOV., & Diode Options V309A (3-way) - Standard Watt CCMV09A - Side ports
2/2 Up to 0.08 Cv Cartridge V210A 1. Short stroke with high shifting forces 3. Precise repeatability 4. Solenoid isolated from contaminated air 5. Very few parts 6. Extremely long life 7. Unique mounting - no fasteners or screws required VALVE Type 2 Way Cartridge (Standard) V210A-CA1-00-xxxx-xxx Cartridge (Axial Flow) V210A-C0-00-xxxx-xxx SOLENOID OPERATOR Solenoid Round X XX X - X XX Voltage EH EG EK EJ Lead wire length (2.5W) (4.0W) (2.5W) (4.0W) 0 A C D E F H Solenoid cover Solenoid can (round) No lead wire C For Top Cover 18 Option and Can w/ 24 Outer Threads 36 48 72 96 144 Only option for Pico cover * High wattage - high speed options - consult factory ** ERC - Energy Reduction Circuitry - Reduces the effective wattage at continuous duty ERC wattage reduction options - consult factory JST TA TC b TE Pico TG TJ TL PG PJ PL PN PC PE Flying Leads A No ground wire C locking & suppr. diode & LED (no ground) E locking & suppr. diode (no ground) G LED (no ground) J MOV (no ground) L LED & MOV (no ground) Transfer oard Note: Pico covers PC-PL have a 3rd Pin which is a location pin CIRCUIT AR ullet valve type Cyl. port size Spacing (mm) Side cylinder port ottom cylinder port #10-32 UNF 12 CCMV10A-00AAA-xx CCMV10A-00AA-xx M5 12 CCMV10A-00AA-xx CCMV10A-00A-xx M7 12 CCMV10A-00AAC-xx CCMV10A-00AC-xx #10-32 UNF 12 - CCMV10A-00DA-xx M5 12 - CCMV10A-00D-xx M7 12 - CCMV10A-00DC-xx Standard xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers.
Fluid: Compressed air, vacuum, inert gases Pressure range: Vacuum to 120 PSI Lubrication: Filtration: Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) 40µ Temperature range: 0 F to 120 F (-18 C to +50 C) Up to 0.08 Cv Voltage range: -15% to +10% of nominal voltage Tools: Manifold cavity step reamer: T-6960 Insertion/removal socket: AT-1181 (it) AT-1185 (it Holder) AT-1184 (Handle) ullet Valve with JST Cover and Circuit oard for LED., MOV., & Diode Options V210A (2-way) - Standard Watt 55.95 11.70 CCMV10A - SIDE PORTS 12.00 14.00 STATION SPACING TYP. CYL. 18.90 28.00 63.55 "P" INDICATES.S.P.PL. "T" INDICATES.S.P.TR. 1/8"-27 N.P.T.F. OR 1/8"-28.S.P.PL OR 1/8"-28.S.P.TR 76.00 4.25 67.50 20.00 10.50 7.90 28.10 36.00 4.25 STATION # 1 TYP. (2) 8.33 DIA. DRILL - 10.0 DEEP 120º C'SINK TO 10.5 DIA. 1/8"-27 N.P.T.F. TAP TO GAGE TYP. (2) (1) EACH END
3/2 NC, Universal Up to 0.09 Cv Cartridge V310A 1. Short stroke with high shifting forces 3. Precise repeatability 4. Solenoid isolated from contaminated air 5. Very few parts 6. Extremely long life 7. Unique mounting - no fasteners or screws required VALVE Type 3 Way N.C. Cartridge (Standard) Solenoid Round (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) 2 3 1 3 1 Lead wire length HF HG HH HJ HK (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) * High wattage - high speed options - consult factory ** ERC wattage reduction options - consult factory 0 A C D E F H Solenoid can (round) No lead wire C For Top Cover 18 Option and Can w/ 24 Outer Threads 36 48 72 96 144 Only option for Pico cover Solenoid cover JST Pico Flying Leads TA A No ground wire TC PC C locking & suppr. diode & LED(no ground) TE PE E locking & suppr. diode (no ground) TG PG G LED (no ground) TJ PJ J MOV (no ground) TL PL L LED & MOV (no ground) PN Transfer oard Note: Pico covers PC-PL have a 3rd Pin which is a location pin CIRCUIT AR Port size V310A-CD1-00-xxxx-xxx X XX X - X XX Voltage HA H HC HD HE 2 V310A-CC1-00-xxxx-xxx SOLENOID OPERATOR 3 Way Universal Spacing (mm) Side cylinder port # 10-32 UNF 12 CCMV10A-00AA-xx M5 12 CCMV10A-00A-xx M7 12 CCMV10A-00AC-xx xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers. ** ERC - Energy Reduction Circuitry - Reduces the effective wattage at continuous duty.
Fluid: Compressed air, vacuum, inert gases Pressure range: Lubrication: Vacuum to 120 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) Filtration: Temperature range: 40µ 0 F to 120 F (-18 C to +50 C) Up to 0.09 Cv -15% to +10% of nominal voltage Voltage range: Tools: Manifold cavity step reamer: T-6963 Insertion/removal socket: AT-1181 (it) AT-1185 (it Holder) AT-1184 (Handle) ullet Valve with JST Cover and Circuit oard for LED., MOV., & Diode Options V310A (3-way) - Standard Watt 60.40 11.70 12.00 14.00 STATION SPACING TYP. CYL. 13.10 28.00 63.55 "P" INDICATES.S.P.PL. "T" INDICATES.S.P.TR. 1/8"-27 N.P.T.F. OR 1/8"-28.S.P.PL OR 1/8"-28.S.P.TR 76.00 4.25 67.50 20.00 10.50 7.90 36.00 4.25 TYP. (2) 28.10 8.33 DIA. DRILL - 10.0 DEEP 120º C'SINK TO 10.5 DIA. 1/8"-27 N.P.T.F. TAP TO GAGE TYP. (4) (2) EACH END STATION # 1
3/2 NC, Universal Up to 0.08 Cv Manifold mount - Non plug-in V310A 1. Short stroke with high shifting forces 3. Precise repeatability 4. Solenoid isolated from contaminated air 5. Very few parts 6. Extremely long life VALVE Type 3 Way N.C. Manifold Mount - Non plug-in Voltage 2 3 1 3 1 V310A-LC1-00-xxxx-xxx SOLENOID OPERATOR Solenoid Lead wire length Solenoid cover Solenoid can (round) HA (1.0W) 0 No lead wire Cover For H (1.8W) A 18 Manifold ody HC (2.5W) 24 C 36 HD (3.0W) D 48 HE (4.0W) E 72 HF (1.0W) F 96 HG (1.8W) H 144 HH (2.5W) HJ (3.0W) HK (4.0W) Only option for Pico cover * High wattage - high speed options - consult factory ** ERC wattage reduction options - consult factory Port size V310A-LD1-00-xxxx-xxx X XX X - X XX Round NON PLUG-IN CIRCUIT AR 3 Way Universal 2 Spacing (mm) JST Pico Flying Leads TA A No ground wire TC PC C locking & suppr. diode & LED(no ground) TE PE E locking & suppr. diode (no ground) TG PG G LED (no ground) TJ PJ J MOV (no ground) TL PL L LED & MOV (no ground) PN Transfer oard Note: Pico covers PC-PL have a 3rd Pin which is a location pin Side cylinder port ottom cylinder port # 10-32 UNF 12 CMV10A-00AA-xx CMV10A-00A-xx M5 12 CMV10A-00A-xx CMV10A-00-xx 12 CMV10A-00AC-xx M7 xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers. CMV10A-00C-xx CMV10A-00 A - xx Replace with D for regulator - Side ports Replace with E for regulator - ottom ports Note: Regulator must be ordered separately - see next page V310A- LC 1-00-xxxx-xxx Replace with 0 for no manual operator * **ERC - Energy Reduction Circuitry - Reduces the effectiveness wattage at continuous duty
Fluid: Compressed air, vacuum, inert gases Pressure range: Lubrication: Vacuum to 120 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) Filtration: Temperature range: 40µ 0 F to 120 F (-18 C to +50 C) Up to 0.08 Cv Voltage range: Spare parts: -15% to +10% of nominal voltage Pressure seal, body to base: 16985 Mounting screw, body to base: 35166-2 pcs required Regulator for bar: PR44A-A0AX X = A 0 to 100 PSI 0 to 60 PSI lank Station Cover Plate: N-V008 C 0 to 40 PSI D 0 to 15 PSI V310A ar Manifold Assembly Without regulator CMV10A Circuit bar for V310 With regulator
2/2 Up to 0.24 Cv Cartridge V214A 1. Short stroke with high shifting forces 3. Precise repeatability 4. Solenoid isolated from contaminated air 5. Very few parts 6. Extremely long life 7. Unique mounting - no fasteners or screws required VALVE Type 2-Way (standard) Cartridge V214A-CA1-00-xxxx-xxx SOLENOID OPERATOR Solenoid Round X XX X - X XX Voltage CA C CC CD CE CF CG CH CJ CK V214A-C0-00-xxxx-xxx (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) Lead wire length Solenoid can (round) 0* A C D E F H C For Top Cover No lead wire 18 24 36 48 72 96 144 JST Pico Flying Leads TA A No ground wire TC PC C locking & suppr. diode & LED (no ground) TE PE E locking & suppr. diode (no ground) TG PG G LED (no ground) TJ PJ J MOV (no ground) TL PL L LED & MOV (no ground) PN Transfer oard GA MAC JAC Connector Option and Can w/ Outer Threads Only option for Pico cover CIRCUIT AR ullet valve type Standard Solenoid cover Cyl. port size Spacing (mm) Side cylinder port ottom cylinder port M7 17 CCMV14A-00AAA-xx CCMV14A-00AA-xx 1/8 17 CCMV14A-00AA-xx CCMV14A-00A-xx 5/32 tube recpt. 17 CCMV14A-00AAC-xx CCMV14A-00AC-xx M7 17 - CCMV14A-00DA-xx 1/8 17 - CCMV14A-00D-xx xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers. Requires special spacing - - consult factory Note: Common inlet & exhaust are 1/4 NPTF For SPPL or SPTR threads consult factory
Fluid: Compressed air, vacuum, inert gases Pressure range: Vacuum to 120 PSI Lubrication: Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) Filtration: 40µ Temperature range: 0 F to 120 F (-18 C to +50 C) Up to 0.24 Cv (4.0 W) Voltage range: -15% to +10% of nominal voltage Tools: Manifold cavity step reamer: T-7331 Insertion/removal socket: AT-1263 (it) AT-1185 (it Holder) AT-1264 (Handle) Flying leads 69.4 JST Connector 66.6 ø 16.5 MAC Jac ø 16.5 69.7 ø 21.5 CCMV14A bar with V214A valves 1/4 NPTF TYP (2) (1) Each side
3/2 Up to 0.24 Cv Cartridge V314A 1. Short stroke with high shifting forces 3. Precise repeatability 4. Solenoid isolated from contaminated air 5. Very few parts 6. Extremely long life 7. Unique mounting - no fasteners or screws required VALVE Type 3-Way N.C. Cartridge 2 3 1 3 1 V314A-CD1-00-xxxx-xxx X XX X - X XX Voltage CA C CC CD CE CF CG CH CJ CK Round 2 V314A-CC1-00-xxxx-xxx SOLENOID OPERATOR Solenoid 3-Way universal valve Lead wire length (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) 0* A C D E F H No lead wire 18 24 36 48 72 96 144 Solenoid can (round) C For Top Cover Option and Can w/ Outer Threads Only option for Pico cover Solenoid cover JST Pico Flying Leads TA A No ground wire TC PC C locking & suppr. diode & LED(no ground) TE PE E locking & suppr. diode (no ground) TG PG G LED (no ground) TJ PJ J MOV (no ground) TL PL L LED & MOV (no ground) PN Transfer oard GA MAC JAC Connector CIRCUIT AR Cyl. port size Spacing (mm) Side cylinder port ottom cylinder port M7 17 CCMV14A-00AA-xx CCMV14A-00A-xx 1/8 17 CCMV14A-00A-xx CCMV14A-00-xx 5/32 tube receptacle 17 CCMV14A-00AC-xx CCMV14A-00C-xx Requires special spacing - - consult factory Note: Common inlet & exhaust are 1/4 NPTF For SPPL or SPTR threads consult factory xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers.
Fluid: Compressed air, vacuum, inert gases Pressure range: Vacuum to 120 PSI Lubrication: Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) Filtration: 40µ Temperature range: 0 F to 120 F (-18 C to +50 C) Up to 0.24 Cv (4.0 W) Voltage range: -15% to +10% of nominal voltage Tools: Manifold cavity step reamer: T-7321 Insertion/removal socket: AT-1263 (it) AT-1185 (it Holder) AT-1264 (Handle) Flying leads JST Connector 76.2 MAC Jac 76.5 75.3 16.5 16.5 21.5 CCMV14A bar with V314A valves 1/4 NPTF TYP (4) (2) Each side
2/2 Up to 0.6 Cv Cartridge V221A 1. Short stroke with high shifting forces 3. Precise repeatability 4. Solenoid isolated from contaminated air 5. Very few parts 6. Extremely long life 7. Unique mounting - no fasteners or screws required VALVE Type 2-Way (standard) Cartridge V221A-CA1-00-xxxx-xxx SOLENOID OPERATOR Solenoid Round CA C CC CD CE CF CG CH CJ CK X XX X - X XX Voltage Lead wire length 0* A C D E F H (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) V221A-C0-00-xxxx-xxx No lead wire 18 24 36 48 72 96 144 Solenoid can (round) C For Top Cover Option and Can w/ Outer Threads Only option for Pico and M12 cover Note: For CIRCUIT AR ordering information please consult factory Solenoid cover M12 RC JST TA TC RE TE RG RJ RL TG TJ TL RN Pico Flying Leads A No ground wire PC C locking & suppr. diode & LED (no ground) PE E locking & suppr. diode (no ground) PG G LED (no ground) PJ J MOV (no ground) PL L LED & MOV (no ground) PN Transfer oard GA MAC JAC Connector Note: Pico covers PC-PL have a 3rd Pin which is a location pin
Fluid: Compressed air, vacuum, inert gases Pressure range: Vacuum to 120 PSI Lubrication: Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) Filtration: 40µ Temperature range: 0 F to 120 F (-18 C to +50 C) Flow: Up to 0.60 Cv (4.0 W) Voltage range: -15% to +10% of nominal voltage Tools: Manifold cavity step reamer: T-7571 Insertion/removal socket: AT-1365 (it) Flying leads 99.0 JST Connector 23.5 DIA. M12 23.5 DIA. 99.7 V221A valves 107.7 23.5 DIA.
3/2 Up to 0.6 Cv Cartridge V321A 1. Short stroke with high shifting forces 3. Precise repeatability 4. Solenoid isolated from contaminated air 5. Very few parts 6. Extremely long life 7. Unique mounting - no fasteners or screws required VALVE Type 3-Way N.C. Cartridge Round CA C CC CD CE CF CG CH CJ CK 2 2 3 1 3 1 V321A-CC1-00-xxxx-xxx SOLENOID OPERATOR Solenoid 3-Way universal valve V321A-CD1-00-xxxx-xxx X XX X - X XX Voltage Lead wire length Solenoid can (round) (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) (1.0W) (1.8W) (2.5W) (3.0W) (4.0W) 0* A C D E F H C For Top Cover No lead wire 18 24 36 48 72 96 144 Option and Can w/ Outer Threads Only option for Pico and M12 cover CIRCUIT AR Solenoid cover M12 JST Pico Flying Leads TA A No ground wire RC TC PC C locking & suppr. diode & LED(no ground) PE E locking & suppr. RE TE diode (no ground) PG G LED (no ground) RG TG TJ PJ J MOV (no ground) RJ PL L LED & MOV RL TL (no ground) PN Transfer oard RN GA MAC JAC Connector Note: Pico covers PC-PL have a 3rd Pin which is a location pin Cyl. port size Spacing (mm) Side cylinder port ottom cylinder port 1/8 25 CCMV21A-00AA-xx CCMV21A-00A-xx 1/4 25 CCMV21A-00A-xx CCMV21A-00-xx xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers. Note: Common inlet & exhaust are 3/8 NPTF For SPPL or SPTR threads consult factory
Fluid: Compressed air, vacuum, inert gases Pressure range: Vacuum to 120 PSI Lubrication: Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) Filtration: 40µ Temperature range: 0 F to 120 F (-18 C to +50 C) Flow: Up to 0.60 Cv (4.0 W) Voltage range: -15% to +10% of nominal voltage Tools: Manifold cavity step reamer: T-7573 Insertion/removal socket: AT-1365 (it) Flying leads 105.0 JST Connector M12 105.0 23.5 DIA. 23.5 DIA. 113.7 CCMV21A bar with V321A valves 23.5 DIA.
Connector Options V210 Flying Leads (A) Flying Leads w/ LED (C, G, L) JST Connector (TA) JST Connector w/ LED (TG, TL) 2 Pin PICO (PN) 3 Pin PICO (PC, PE, PG, PJ, PL)
Connector Options V310 Flying Leads (A) Flying Leads w/ LED (C, G, L) JST Connector (TA) JST Connector w/ LED (TG, TL) 2 Pin PICO (PN) 3 Pin PICO (PC, PE, PG, PJ, PL)
Connector Options V214 Flying Leads (A) Flying Leads w/ LED (C, G, L) JST Connector (TA) JST Connector w/ LED (TC, TG, TL) MAC Jac (GA) 2 Pin PICO (PN) 3 Pin PICO (PC, PE, PG, PJ, PL)
Connector Options V314 Flying Leads (A) Flying Leads w/ LED (C, G, L) JST Connector (TA) JST Connector w/ LED (TC, TG, TL) MAC Jac (GA) 2 Pin PICO 2 Pin PICO (PN) 3 Pin PICO 3 Pin PICO (PC, PE, PG, PJ, PL)
V214 series. manifold producing measurably higher outlet pulse height (force) in blow off type of applications. We settings accordingly.
MAC VALVES, INC. P.O. OX 111 30569 ECK ROAD WIXOM, MI 48393-7011 TEL: 1-800-MAC VLVS TEL: 1 (248) 624-7700 FAX: 1 (248) 624-0549 www.macvalves.com mac@macvalves.com MAC VALVES, INC. 5555 ANN AROR ROAD DUNDEE, MI 48131 TEL: 1 (734) 529-5099 FAX: 1 (248) 863-2959 MAC VALVES EUROPE, INC. RUE MARIE CURIE, 12-4431 ANS (LIEGE) ELGIUM TEL: 32 (4) 239 68 68 FAX: 32 (4) 263 19 42 info@macvalves.be MAC VALVES ASIA, INC. NO. 45, DONGYUAN ROAD JHONGLI CITY, TAOYUAN COUNTY TAIWAN TEL: 886 (3) 463-6868 FAX: 886 (3) 463-4576 mva@macasia.com.tw MAC VALVES PACIFIC, INC. P.O. OX 12221 PENROSE, AUCKLAND NEW ZEALAND TEL: 64 (9) 634-9400 FAX: 64 (9) 634-9401 www.macvalves.co.nz sales@macvalves.co.nz 999VA