has no substitute experience has no substitute Continuous Miner CM2 Series
www.eickhoff-international.co Eickhoff Bergbautechnik GbH the Mining Equipent Division Eickhoff Bergbautechnik GbH located in Bochu, Gerany is a anufacturer of underground coal ining equipent for the global ining industry. The portfolio coprises a full range of shearer loaders for longwall ining operations as well as various versions of Continuous Miners for roo and pillar operations. Eickhoff Bergbautechnik GbH is part of the Eickhoff Group of Copanies. Besides being well placed in the ining business, the Eickhoff Group has also been recognized for its high quality industrial gearing products, wind turbine gearboxes and highly specialized cast steel products since 1864. Eickhoff Continuous Miner CM2-Series Eickhoff ining achinery is well known for its reliable and robust design. Based on ore than a century of experience in anufacturing ining equipent, gearboxes and steel castings, our Continuous Miners have proven their outstanding capabilities under the toughest conditions in coal ining. The achine s concept has been steadily refined in close cooperation with custoers to eet the highest expectations in ters of safety, productivity and aintainability. Eickhoff Continuous Miners are designed for operation in challenging ining conditions and can be easily adapted to eet specific custoers requireents. Drive Systes The Eickhoff CM2 series is the only Continuous Miner available worldwide giving custoers the choice between two high powered traction drive concepts: Hydraulic Version The CM2H type is a field-proven traction syste driven by hydraulic otors providing significant advantages in wet and uddy floor conditions. Additional benefits of this traction syste are low investent costs, high power density and easy aintainability. The hydraulic traction syste is highly valued by Eickhoff custoers ining in difficult conditions. Electric Version The CM2E type includes variable frequency drives for custoers preferring this option. 2 The Crew - The Machine - The Outcoe
Interchangeability of Coponents CM2H-45 CM2H-38 CM2H-37 CM2H-30 Interchangeability of Coponents Four different types of Eickhoff Continuous Miners are available for cutting face heights fro 1.4 up to 4.5. All achine types share a large nuber of coponents that allow for interchangeability and optiized stock anageent. The variations in design and structure (see cross hatched parts in figure above) ainly affect the cutter boo and the ain frae which are adapted to different cutting conditions. 3
www.eickhoff-international.co Cutter Gear Boxes The cutter gear box concept is based on separate, but interconnected LH and RH units to deliver the full installed otor power to the cutting drus. The two units ensure siple and cost effective aintenance at the face. Either of the gear boxes can be changed independently should the need arise. Cutter Drus The optiu ratio between dru size and RPM ensures a slow bit tip speed, thus greatly keeping fines and dust levels down to an inevitable iniu. Conveyor and CLAs The cobination of effective CLAs (Centrifugal Loading Ars) plus a wide foot-shaft-driven chain conveyor guarantees unrestricted suping and shearing as well as short cycle ties. Traction Syste Both the hydraulically and the electrically powered Continuous Miners provide the lowest ground pressure cobined with the highest traing speeds and traction forces. Mines suffering fro wet and uddy floor conditions will benefit fro the highly reliable hydraulic traction syste. Cutter Gear Boxes Conveyor and CLAs 4 Cutter Drus Traction Syste
Hydraulic Syste Proportional suping and shearing are achieved by control loops onitoring the cutter otor currents occurring in cutting cycle. Even though the traction otors are hydraulically driven (H-type), the entire hydraulic circuit only contains a ere 600 liters of hydraulic oil. Even when traing the achine without cooling water, the Continuous Miner drives through the section for at least 20 inutes. Reote Control and Drivers Cab The light weight radio reote control is carried in front of the body using shoulder straps. The ergonoically designed buttons and levers enhance operator control of the achine for a long period without getting tired. Depending on custoers requireents for operator location according to their geological conditions, the Continuous Miners can optionally be equipped with an onboard cabin protecting the driver s seat. In this case the radio reote control is connected via cable to the achine avoiding an additional stationary control panel. Radio Reote Control Hydraulic Traction Motor Drivers Cabin 5
www.eickhoff-international.co Scrubber and Methane Syste Electrical Syste Depending on cutting height and custoers requireents, alost all available akes of scrubbers and ethane detection systes can be fitted onto the Continuous Miner. The unique electrical design concept akes a transforer unnecessary. All electrical coponents for achine operation and onitoring are placed in a single flaeproof enclosure in a high and dry position with easy access for aintenance and trouble shooting. An IPC and several icroprocessor controlled otor protection devices reduce the nuber of electrical coponents to a iniu while increasing achine availability. Coprehensive data logging and transission of relevant operational data to the surface give ine engineers the opportunity to optiize their production processes. A color display is provided on the achine to show operational paraeters and achine condition. Scrubber Syste On Board IPC 6
Machine weight tonnes Ground pressure kpa Crawler chain width Tra speed CM2H-30 CM2H-37 CM2H-38 CM2H-45 68 72 78 78 200 510 560 /in Chassis width Chassis height Min. cutting height Cutting width Max. cutting height Dru diaeter 25 3.050 1.200 1.4 1.300 1.6 2.2 3.8 4.5 3.65 3.0 3.7 1.2 Dru speed rp 43, 48 Bit tip speed /s 2.7, 3.0 CLA speed rp 53 Supply voltage 1.8 V 1000/1140 Cutting power, electric drive 2x 150 Spinner and conveyor power electric drive Hydraulic traction power (electric drive 2x 42) 2x 45 2x 60 Pup power, electric drive 125 Scrubber power, hydraulic or electric drive Hydraulic or electric scrubber otor with up to 45 Total installed power 560 2x 180 620 7
Eickhoff Bergbautechnik GbH Hunscheidtstrasse 176 44789 Bochu GERMANY experience experience has has no substitute no Phone: +49 234 975-0 Fax: +49 234 975-2676 contact@eickhoff-bochu.de www.eickhoff-international.co Subsidiaries Eickhoff Corporation 200 Park West Drive Pittsburgh, PA 15275 USA Phone: +1 412 78 8 1400 Fax: +1 412 78 8 4100 sales@eickhoff.us www.eickhoffining.co Eickhoff (G.B.) Ltd. Darnall Works Prince of Wales Road Sheffield S9 4DZ GREAT BRITAIN Phone: +44 114 261-0147 Fax: +44 114 244-9584 contact@eickhoffgb.idps.co.uk Eickhoff Polonia Ltd.Sp.zo.o. ul. Lwowska 38 40-389 Katowice POLAND Phone: +48 32 2066011 Fax: +48 32 3558754 eickhoff_sekretariat@onet.pl Eickhoff PTY. Ltd. 12 Strauss Crescent 1422 Wadeville, Ext. 6 SOUTH AFRICA Phone: +27 11 9025630 Fax: +27 11 9025830 d@eickhoff.co.za www.eickhoff.co.za OOO Eickhoff Moscow Wolokolaskoje Chaussee 73 Office 207 125424 MOSCOW RUSSIA Phone: +7 495 363 43 17 Fax: +7 495 363 43 17 eickhoff-oscow@ail.ru OOO Eickhoff Sibir Gogolstr. 25 562700 Kiseljovsk Keerovo Region RUSSIA Phone: +7 38464 20131 Fax: +7 38464 20131 eickhoff@nvkz.net Eickhoff Office Beijing Roo A0708, Huixin Plaza, No. 8 Beichen East Road, Chaoyang District Beijing 100101 P.R. CHINA Phone: +86 10 51662022 Fax: +86 10 51662021 eickhoff@vip.sina.co worldwide 000 Eickhoff Bel Eickhoff (G.B.) Ltd. Soligorsk Eickhoff Corporation Sheffield Pittsburgh Eickhoff Windpower GbH Dresden Eickhoff Polonia Ltd. Mikolow Eickhoff PTY. Ltd. Johannesburg 000 Eickhoff Moscow Tianjin Eickhoff Bergbautechnik Co. Ltd. No. 9 Xiangrui Road, Tianxiang Industrial Park Xiqing Econoic Developent Area Tianjin, 300385 P.R. CHINA Phone: +86 2223962699 Fax: +86 2223962698 eickhoff_liuxin@126.co Eickhoff Australia PTY. Ltd. 41 Prince Willia Drive Seven Hills NSW 2147 AUSTRALIA Phone: +61 2 9674-6733 Fax: +61 2 9674-6581 john.sallwood@eickhoff.co.au 000 Eickhoff Sibir Kiseljovsk Eickhoff Beijing Tianjin Eickhoff Precision Machinery Co. Ltd Bergbautechnik Co. Ltd Eickhoff Australia PTY Ltd. Sydney IOOO EickhoffBel St. Kali-1, Landkreis Soligorsk Gebiet Minsk, Postfach 81 223710 Soligorsk BELARUS Phone: +375 174200889 Fax: +375 174200688 s_eickhoffbel@hotail.co Australia Belorussia China Gerany Poland Russia South Africa UK USA