has no substitute experience has no substitute Continuous Miner CM2 Series Foto: Godehardt
www.eickhoff-international.co CM2H-45 CM2H-36 Eickhoff Bergbautechnik GbH the Mining Equipent Division Eickhoff Bergbautechnik GbH, located in Bochu Gerany, is a anufacturer of underground coal ining equipent for the global ining industry. The portfolio coprises a full range of shearer loaders for longwall ining operations as well as various versions of Continuous Miners for roo and pillar ining operations. Eickhoff Bergbautechnik GbH is part of the Eickhoff Group of Copanies. Besides being well placed in the ining business, the Eickhoff Group has also been recognized for its high quality industrial gearing products, wind turbine gearboxes and highly specialized cast steel products since 1864. Eickhoff Continuous Miner CM2-Series Eickhoff ining achinery is well known for its reliable and robust design. Based on ore than a century of experience in anufacturing ining equipent, gearboxes and steel castings, our Continuous Miners have proven their outstanding capabilities in soe of the toughest conditions in coal ining. The achine s concept has been steadily refined, in close cooperation with Eickhoff s custoers, to eet the highest expectations in ters of safety, productivity and ain - tai nability. Eickhoff Continuous Miners are designed for operation in challenging ining conditions and can be easily adapted to eet specific custoers requireents. Custoer Service Eickhoff is present in all ajor coal ining regions around the globe. Its subsidiaries and dealerships are sales, service and distribution hubs close to the custoers. This ensures quick spare parts delivery and therefore high achine availabilities. Eickhoff s dedicated and coitted staff supports their custoers whenever required. 2 The Crew - The Machine - The Outcoe The Support People and Parts Foto CM2H-36: Godehardt
CM2H-37 CM2H-30 Interchangeability of Coponents high sea CM2H-45 83 t 2.2-4.5 id sea CM2H-36 83 t 1.6-3.6 low sea CM2H-37 74 t 1.6-3.7 CM2H-30 74 t 1.4-3.1 Interchangeability of Coponents Four different types of Eickhoff Continuous Miners are available for cutting face heights fro 1.4 up to 4.5. All achine types share a large nuber of coponents that allow for interchangeability and optiized stock anageent. The variations in design and structure ainly affect the cutter boo and the ain frae which are adapted to different cutting conditions. 3
www.eickhoff-international.co Cutter Gearboxes The cutter gearbox concept is based on separate, but interconnected LH and RH units to deliver the full installed otor power to the cutting drus. The two units ensure siple and cost effective aintenance at the face. Either of the gearboxes can be changed independently should the need arise. Cutter Drus The optiu ratio between dru size and RPM ensures a slow bit tip speed, thus greatly keeping fines and dust levels down to a iniu. Conveyor and CLAs The cobination of effective CLAs (Centrifugal Loading Ars) plus a wide foot-shaft-driven chain conveyor guarantees unrestricted suping and shearing as well as short cycle ties. Custoers have the option of either a straight or kinked conveyor subject to whichever will best suit their transport equipent and ining conditions. Traction Syste The hydraulically powered Continuous Miners have a low ground pressure and cobine high traing speeds with axiu thrust. This sophisticated hydraulic traction syste has significant advantages in wet and Cutter Gearboxes Conveyor and CLAs 4 Cutter Drus Traction Syste
uddy floor conditions. It is highly valued by Eickhoff s custoers because of its low life cycle costs, ease of aintainability and outstanding perforance in difficult ining conditions such as steep inclines. Hydraulic Syste Proportional suping and shearing is achieved by control loops onitoring the cutter otor currents occurring during the cutting cycle. Even though the traction otors are hydraulically driven, the entire hydraulic circuit only contains a ere 600 liters of hydraulic oil. The achines have the ability to continue traing without cooling water for extended periods. Reote Control and Drivers Cab The light weight radio reote control is carried in front of the body using shoulder straps. The ergonoically designed buttons and levers enhance operator control of the achine and allow for long periods of operation without getting tired. Depending on custoers requireents and/or national legislation for operator posititoning, the Continuous Miner can optionally be equipped with an onboard cabin protecting the driver s seat. In this case the radio reote control is connected via cable to the achine avoiding the need for additional stationary control panel. This additional feature is widely used in roadway developent applications. Radio Reote Control Hydraulic Traction Motor Proxiity Detection Syste 5
www.eickhoff-international.co Scrubber, Methane Syste and PDS Electrical Syste Depending on custoers requireents, all ajor akes of dust scrubbers, ethane detection systes and proxiity detection systes can be fitted onto the Continuous Miners. Naturally such systes will coply to the relevant local safety regulations and standards. The unique electrical design concept akes a transforer unnecessary. All electrical coponents for achine operation and onitoring are placed in a single flaeproof enclosure in an elevated position, well above ud and water, with easy access for aintenance and trouble shooting. An IPC and several icroprocessor controlled otor protection devices reduce the nuber of electrical coponents to a iniu while increasing achine availability. Coprehensive data logging and transission of relevant operational data to the surface give ine engineers the opportunity to optiize their production processes. A color display is provided on the achine to show operational paraeters and achine condition, assisting service and repair personnel with quick fault finding. Scrubber Syste www.eickhoff- bochu.de EICKHOFF OLOGY MINING TECHN EICKHOFF MINING Shift Report Relocating 54 inutes TECHNOLOGY US MINER CONTINUO US MINER NTINUO C 69O09 T IFT REPOR T 69 SH09 OR SHIFT REP 5,41 inutes/h our Pct. of Away 17 % Conveyor Motor 25.10.2016 0 06:00-16:0 25.10.2016 0 06:00-16:0 122 inutes 12,21 inutes/h our www.eickhoff-bochu.de www.eickhoff-bochu.de www.eickhoff-bochu.de CH4Shift TripsReport Shift Report Shift Report 1 InforationInforation Machine no Machine 6909 no 6909 Inforation 0,1 trips/hour Active 1 inutes Machine Client no 6909 Exxaro Client Exxaro Date 25.10.2016 Date 25.10.2016 Mine Dorstfontein Mine Dorstfontein Date 25.10.2016 Shift Start 06:00 Shift Start 06:00 578 inutes 578 inutes Pct. of Shift 96 % Pct. of Shift 96 % Pct. of Shift 96 % rip Shift End 16:00 Water Trips Recorded tie 578 inutes Mine Dorstfontein 1,02 inutes/t ShiftStart End 06:00 16:00 Shift End 16:00 Shift Recorded tie Recorded tie Client Exxaro 3 0 trips/hour Active 0,21 inutes 0,07 inutes/t rip First Sup LOGY MINING TECHNO LOGY MINING TECHNO 6 Last Sup Last Sup First CH4 Sup Test CH4 Test Last Water SupTest Water Test 15:00 - - 07:30 15:00 15:00 07:30 07:11 07:26 07:26 14:24 14:24 07:26 14:24-4 inutes -4 inutes 36 inutes 36 inutes -4 inutes 36 inutes Shuttle Cars Shuttle Cars Shuttle Cars 111 111 111 11,1 cars/hour 11,1 cars/hour 11,1 cars/hour Away Away 314 inutes 314 inutes Away 314 inutes Loading 66 seconds/car Loading 66 seconds/car Loading 66 seconds/car 07:11 Away Away 2,9 inutes 2,9 inutes Away 2,9 inutes SC Away SC Away 2,8 inutes/car 2,8 inutes/car SC Away 2,8 inutes/car Cutter Motor Shift Report First Sup 07:30 Cutter Motor CH4 Test 07:11 Water Test - The inforati on shown in cae fro sensors this report was calculated using installed on inforation the achine. sophisticated provided. However, Eickhoff has forulas, atheat responsible ade every the inforati or liable for ical tools and attept to ensure on is provided the accuracy, threshold as is without content, copleten guarantee of the accuracy and reliability s. The raw data ess, legality, any kind. Eickhoff of the or reliability cannot of the inforati on contained be held in this report. 3/3 Cutter Motor Runtie 275 inutes Runtie 275 inutes Runtie 275 inutes Load 145 inutes Load 145 inutes Load 145 inutes Starts 37 Starts 37 Starts 37 Runtie 7,44 inutes Runtie 7,44 inutes Runtie 7,44 inutes The inforation shown The inforation in this report shown was calculated in this report using wassophisticated calculated using forulas, sophisticated The atheatical inforation forulas, tools shown atheatical and in thresholds. this report tools was The and calculated raw thresholds. data using Thesophisticated raw data forulas, atheatical tools and thresholds. The raw data cae fro sensorscae installed froon sensors the achine. installedeickhoff on the achine. has adeeickhoff every attept has ade tocae ensure every fro the attept sensors accuracy to ensure installed and reliability theonaccuracy the achine. of the and reliability Eickhoff of hasthe ade every attept to ensure the accuracy and reliability of the inforation provided. inforation However, provided. the inforation However,is the provided inforation as is without is provided guarantee asinforation is without of any kind. guarantee provided. Eickhoff of However, any cannot kind. the beeickhoff held inforation cannot is provided be held as is without guarantee of any kind. Eickhoff cannot be held 2/3 or reliability 2/3of the inforation contained in this report. responsible or liable responsible for the accuracy, or liablecontent, for the accuracy, copleteness, content, legality, copleteness, or reliability legality, responsible of theorinforation reliability or liable for ofcontained the theinforation accuracy, in thiscontent, report. contained copleteness, in this report. legality, 2/3 On Board IPC
CM2H-30 Machine weight tonnes CM2H-37 CM2H-36 74 83 Ground pressure kpa 200 Crawler chain width 560 Traing speed Chassis width Miniu traing height /in Min. cutting height* Cutting width Max. cutting height Suping speed interediate: 8, fast: up to 25 3.17 1325 1430 1480 1650 1.4 1.6 1.6 2.2 3.6 4.5 3.65 3.1 3.7 /in 0-3 t/in 30 1.2 Dru speed rp 48 Bit tip speed /s 3.0 CLA speed rp 49 Loading rate Dru diaeter Supply voltage CM2H-45 V 1000 / 1140 Cutting power, electric drive 2x 180 Spinner and conveyor power electric drive 2x 45 Hydraulic traction power 2x 60 2x 75 Pup power, electric drive 125 / 140 160 Scrubber power installed power * depending on undulation of the sea Hydraulic or electric scrubber otor with up to 45 620 / 635 655 7
Eickhoff Bergbautechnik GbH A Eickhoffpark 1 44789 Bochu GERMANY experience experience has has no substitute no Phone: +49 234 975-0 Fax: +49 234 975-2676 contact@eickhoff-bochu.de www.eickhoff-international.co Subsidiaries worldwide Eickhoff Corporation 200 Park West Drive Pittsburgh, PA 15275 USA Phone: +1 412 78 8 1400 Fax: +1 412 78 8 4100 sales@eickhoff.us www.eickhoffining.co Eickhoff Polonia Ltd.Sp.zo.o. ul. Lwowska 38 40-389 Katowice POLAND Phone: +48 32 2066011 Fax: +48 32 3558754 eickhoff_sekretariat@onet.pl 000 Eickhoff Bel Soligorsk Eickhoff Corporation Pittsburgh Eickhoff Bergbautechnik GbH Bochu Eickhoff (Pty.) Ltd. Johannesburg 000 Eickhoff Moscow Eickhoff Polonia Ltd. Katowice 000 Eickhoff Sibir Kiseljovsk Eickhoff Beijing Tianjin Eickhoff Bergbautechnik Co. Ltd Eickhoff Australia PTY Ltd. Sydney Eickhoff (Pty.) Ltd. 12 Strauss Crescent Wadeville, Ext. 6, 1422 Gauteng SOUTH AFRICA Phone: +27 11 902-5630 Fax: +27 11 902-5830 sales@eickhoff.co.za www.eickhoff.co.za OOO Eickhoff Moscow Wolokolaskoje Chaussee 73 Office 207 125424 MOSCOW RUSSIA Phone: +7 495 363 43 17 Fax: +7 495 363 43 17 eickhoff-oscow@ail.ru OOO Eickhoff Sibir Gogolstr. 25 562700 Kiseljovsk Keerovo Region RUSSIA Phone: +7 38464 20131 Fax: +7 38464 20131 eickhoff@nvkz.net Eickhoff Office Beijing Roo A403, Huixin Plaza, No. 8 Beichen East Road, Chaoyang District Beijing 100101 P.R. CHINA Phone: +86 10 51662022 Fax: +86 10 51662021 eickhoff_bj@126.co Tianjin Eickhoff Bergbautechnik Co. Ltd. No.19 Saida No.2 Avenue, Xiqing Econoic Developent Area, Tianjin 300385 P.R.China Phone: +86 22-23962699 Fax: +86 22-23962698 eickhoff_liuxin@126.co Eickhoff Australia PTY. Ltd. 41 Prince Willia Drive Seven Hills NSW 2147 AUSTRALIA Phone: +61 2 9674-6733 Fax: +61 2 9674-6581 john.sallwood@eickhoff.co.au IOOO EickhoffBel St. Kali-1, Soligorsk County Minsk Region PO Box 81 223710 Soligorsk BELARUS Phone: +375 174200889 Fax: +375 174200688 s_eickhoffbel@hotail.co AUSTRALIA BELORUSSIA CHINA GERMANY POLAND RUSSIA SOUTH AFRICA USA