COMPANY PROFILE NORTH AMERICA. Trioliet. Invents for you.

COMPANY PROFILE COMPANY PROFILE NORTH AMERICA Trioliet. Invents for you.

Trioliet feeding technology since 1950 Trioliet BV NL - 7575 BW Oldenzaal Kleibultweg 59 The Netherlands

Over 60 years of innovation INDEX Trioliet head office, Oldenzaal, the Netherlands Trioliet. Invents for you................................................................................................................ 4 TFM Tracker.................................................................................................................................. 9 What makes Trioliet mixers special?..........................................................................................10 Summary Trioliet Solomix range................................................................................................12 Top Loading Mixers Solomix 1..................................................................................................................................... 14 Solomix 2..................................................................................................................................... 21 Solomix 3..................................................................................................................................... 38 Shifttronic 2-speed and 3-speed reduction gearbox................................................................. 42 2 3 Stationary Mixers......................................................................................................................... 44 Truckmount..................................................................................................................................48 Triomatic...................................................................................................................................... 51 Loading equipment Triomaster S................................................................................................................................ 50 Sales organization North America............................................................................................. 54

Trioliet. Invents for you! Trioliet is a leading Dutch company engaged in the development, production and marketing of machines and systems for feeding dairy and beef cattle at modern, professional farms. This position is based on more than 60 years of experience in (silage) feeding technology. Listening to the wishes and requirements of the dairy and beef farmer enables us to offer made-to-measure solutions, anywhere in the world. Not surprising therefore, that today Trioliet exports well over 80% of its machines to more than 40 countries worldwide. Machines for silagecutting, loading, mixing and feeding dairy and beef cattle and machines for feeding Biogas systems.

R & D Department The product 4 5 Trioliet is continuously working on new developments, new technologies and new techniques. Function and ease of operation of the machines are all-important. From silage block cutters to self-loading mixer feeders. Machines are developed and then extensively tested at our experimental farms to be able to offer optimum solutions for the changing requirements and wishes of the professional dairy and beef farmer.

Solomix with VLK discharge unit Complete regular discharge Regardless of your farm situation, Trioliet offers you a suitable machine that will distribute the required feed at all times at the right place and in the right quantity for your cattle.

Solomix with ZK discharge unit The perfect solution for any farm situation 6 7 The Solomix mixer feeder is available in different options. The front unloader is available in three different discharge options. One can choose from a high, a low or a wider discharge unit. The wider unit has more capacity and is particularly suitable for the larger mixer feeder wagons. For the transport, there is a choice of various possibilities: side discharging, a conveyor chain, a curved conveyor chain, an adjustable elevator chain, or a synthetic conveyor belt. Side discharging is an excellent choice for any standard situation. The machine with side discharging is also available with a straw blower to distribute straw in deep litter stables and in cubicles. For any situation, such as low temperatures, small or wide feed alleys, or feeding troughs, an appropriate choice can be made.

2810 V 3610 V CC 400 View Trioliet weigh cell Electronic weighing system The Trioliet electronic weighing system comes as standard with three sturdy weigh cells for maximum stability. Each weigh cell has two sets of strain gauges. So each weigh cell measures two values and then the average is calculated. The gold-plated contacts ensure a high operational reliability, even under the most extreme conditions. The digital weight indicator is placed in an impact-resistant, watertight housing.

TFM Tracker Trioliet Feed Management system for optimum feeding TFM Tracker is a full-featured Windows based feed management system. TFM Tracker also offers operators additional management tools including: operator control, pen review, online feed data exchange with nutritionists, ingredient tracking and numerous reports. TFM Tracker is an indispensable management tool for forward thinking operators! Simply enter your feed ingredients, rations, production groups, and mixer information in your TFM Tracker software. RF DataLink (wireless) or a USB memory device is used to transfer feeding instructions to the indicator on the mixer. The indicator displays the ingredients to be loaded, their weight, as well as the corresponding pen information. During feeding, the actual weights of loaded ingredients and fed ration are saved and returned via DataLink or USB. TFM Tracker software generates various detailed reports, tables and graphs. 8 9 TFM Tracker package includes helpdesk and software updates free of charge for the first year.

What makes Trioliet Mixers special? Dual Flow by Offset Inserts The Trioliet mixer feeders with two and with three vertical mixing augers are equipped with patented Offset Inserts, for interaction between the front and rear mixing chambers (forced horizontal mixing), resulting in quick and homogeneous mixing and a consistent and complete discharge. Perfect view The wide observation window at the front of the mixing chamber ensures a perfect view at the mixing process. Unique bearing construction The auger bearings include a maintenance-free conical roller bearing at the top and a sinter sleeve bearing at the bottom. This bearing construction will absorb all axial and radial auger forces. The large bearing distance ensures maximum stability. Integrated chassis for long life All Trioliet mixer feeders have a very stable auger construction, supported on the chassis. As a result all forces on the mixing auger are directly absorbed by the integrated chassis.

Patented Trioform auger knives The patented Trioform auger knives are mounted at horizontal positions on the auger flyghting. This ensures an optimum cutting performance with less resistance in the feed (fuel saving). The unique shape provides more strength and a longer life. Special welding of the auger flyghting Special welding of the auger flyghting protects from wear and adds more life to the auger. Twin Stream auger The optimum auger shape of the Twin Stream auger result in a quick and homogeneous mixing action at a low power requirement (low diesel consumption). No wasted space and higher capacity of cubic foot because of slim auger body. Even and quick discharge caused by the two symmetrical dispenser arms. Trioliet wear ring for stability and long life time The special Trioliet wear ring ensures a longer life of the mixing tub. 10 11 Special Trioliet tires Sturdy Trioliet tires underneath the mixer feeder wagon ensure a high quality and longer life. Many tire options available. Unique weighing system The Trioliet electronic weighing system comes as standard with three (Trailed mixers up to 4000) or five ( 4600 and 5200) heavy duty weigh bars for maximum stability. Truckmount and twin auger stationary mixers have a 4-point weighing system. Every weigh bar has double sided strain gauges for maximum accuracy. The scale head is made from an rugged indicator case of high-impact durable material. Many options and accessories available, like data transfer by USB, radiographic controls, remote displays and wireless remote indicator.

Summary Trioliet Solomix range Main machine types VLH unit in front of the machine. Wheels underneath the mixing chamber. Range (cu.ft.): 250-1,060 VLL unit in front of the machine. Wheel next to the mixing chamber. Formally VL. Range (cu.ft.): 350-715 VLX VLH with a heavy duty construction. unit in front of the machine. Undercarriage underneath the mixing chamber. 1000 RPM driveline. Formally "VLB" and "VLK" Range (cu.ft.): 860-1,650 ZK doors in the side wall of the mixing chamber. Range (cu.ft.): 180-860 ZKX doors in the side wall of the mixing chamber. Larger units with 1,000 RPM driveline Range (cu.ft.): 860-1,860 P ZK doors in the side wall of the mixing chamber with a straw bedder in front. Range (cu.ft.): 350-860

units B Cross conveyor belt Available for series VLL, VLH, VLX K Cross conveyor chain Available for series VLH, VLX C Curved cross conveyor chain with side shift Available for series VLH 12 13 S Cross conveyor chain with adjustable discharge height Available for series VLL Undercarriage T Walking tandem axle TR Forced steered tridem axle with suspension

Mixer feeder with single auger and two side discharge doors Standard features 1 Twin Stream auger Trioform auger knives 1 or 2 restrictor-blade(s) Constant velocity PTO-shaft Fixed adjustable drawbar Wear ring Two large side doors actuated by one (500 ZK) or two cylinders Side doors with rounded edges for better discharge (700/900 ZK) Manual adjustable discharge chutes (700/900 ZK) or fixed rubber chute (500 ZK) Flexible and spacious side door covers (700/900 ZK) Rubber side door covers (500 ZK) 2 wide wheels Direct operation by tractor hydraulics Hydraulic brakes (not for 500 ZK) Complete regular discharge by new type of discharge door and door covers. 2 Side discharge doors Capacity Cu. Ft. 180 250 280 320 350 Overall length Inch 167" 170" 178" 174" 181" Overall width Inch 86" 91" 98" 91" 98" Overall height Inch 85" 94" 98" 109" 109" Width outside wheels Inch 70" 73" 75" 73" 75" height* Inch 32" 33" 32" 32" 32" Net weight Lbs 4,190 5,360 7,250 5,890 7,690 Maximum load Lbs 4,850 5,510 7,720 6,610 8,820 Number of auger knive positions 7 7 8 8 9 Number of knives mounted per auger 4 4 5 5 6 Power requirement PTO HP 55 55 66 60 68 Tires (2x) 10.0/75-15.3 340/55-16 400/45 L 340/55-16 400/45 L 18 Ply 17.5 17.5 PTO Drive 540 RPM Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 2 double acting valves * Without chute Options Electronic weighing system Electric operation Hydraulic restrictor blades Hydraulic jack Reduction gearbox Hay ring Chain conveyor Mineral chute Lighting set Pivoting discharge chute TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with single auger and two side discharge doors 1 0 0 0 ( L ) - 1 4 0 0 Z K ( C ) 1300 L ZK 14 15 2 Side discharge doors Capacity Cu. Ft. 350 430 430 465 500 500 Overall length Inch 188" 184" 191" 199" 194" 197" Overall width Inch 106" 98" 106" 119" 106" 106" Overall height Inch 98" 117" 109" 100" 119" 119" Width outside wheels Inch 83" 75" 83" 83" 83" 83" height* Inch 32" 32" 32" 32" 32" 32" Net weight Lbs 7,910 8,120 8,380 9,040 9,040 9,040 Maximum load Lbs 9,920 9,920 9,920 11,020 11,020 11,020 Number of auger knive positions 9 9 10 11 12 12 Number of knives mounted per auger 6 6 7 8 9 9 Power requirement PTO HP 75 68 82 95 82 82 Tires (2 x) 400/45 L 17.5 PTO Drive 540 RPM Scale system 3-point Hydraulic power requirement 5 gallons/min. 2,500 psi Required tractor hydraulic 2 double acting valves * Without chute

Mixer feeder with single auger and flat chain conveyor at front Standard features 1 Twin Stream auger Trioform auger knives 2 restrictor blades Low drawbar Wear ring Constant velocity PTO shaft Dual discharge flat chain conveyor at the front Two wide wheels Control by bowden cable Hydraulic brakes Dual discharge flat chain conveyor at the front Capacity Cu. Ft 280 350 350 430 500 Overall length Inch 187" 190" 196" 192" 205" Width Inch 91" 90" 96" 97" 96" Overall height Inch 98" 109" 98" 116" 119" Width outside wheels Inch 75" 75" 83" 75" 83" Length chain conveyor Inch 91" 91" 96" 91" 96" height Inch 29" 29" 29" 29" 30" Height bottom of chain Inch 21" 21" 21" 21" 21" Net weight Lbs 7,800 8,250 7,610 8,930 10,010 Maximum load Lbs 7,720 8,820 9,920 9,920 11,020 Number of auger knive positions 8 9 9 10 12 Number of knives mounted per auger 5 6 6 7 9 PTO Drive 540 540 540 540 540 Power requirement PTO HP 66 68 75 75 82 Tires (2 x) 400/45 L17.5 Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Electric operation Hydraulic restrictor blades Hydraulic jack Reduction gearbox Hay ring Lighting set Mineral chute Chain conveyor with side shift Speed regulator chain conveyor TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with single auger and curved cross chain conveyor at front Standard features 1 Twin Stream auger Trioform auger knives 2 restrictor blades Constant velocity PTO shaft Low drawbar Wear ring Curved cross chain conveyor with side shift at the front Two wide wheels Control by bowden cable Hydraulic brakes 16 17 Curved cross chain conveyor with side shift at the front Capacity Cu. Ft 280 350 350 430 500 Overall length Inch 187" 190" 196" 192" 203" Overall width Inch 91" 91" 100" 97" 100" Overall height Inch 98" 109" 98" 116" 119" Width outside wheels Inch 75" 75" 83" 75" 83" Lenght cross conveyor Inch 91" 91" 100" 91" 100" height (center position) Inch 39" 39" 42" 39" 42" height (side shifted) Inch 48" 48" 52" 48" 52" Height bottom of conveyor (center position) Inch 32" 32" 35" 32" 35" Height bottom of conveyor (side shifted) Inch 41" 41" 44" 41" 44" Net weight Lbs 7,800 8,250 7,610 8,930 10,010 Maximum load (techn.) Lbs 7,720 8,820 9,920 9,920 11,020 Number of auger knive positions 8 9 9 10 12 Number of knives mounted per auger 5 6 6 7 9 PTO Drive 540 540 540 540 540 Power requirement PTO HP 66 68 75 75 82 Tires (2 x) 400/45 L17.5 Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Lighting set TC knives Reduction gearbox Off set clevis Long Trioform auger knives Electric operation Hay ring 7/8" auger flights Hydraulic jack Heavy Duty PTO shaft Magnets

Mixer feeder with single auger and cross conveyor belt at front 8 0 0-1 0 0 0 ( L ) V L H - B Standard features 1 Twin Stream auger Trioform auger knives 1 or 2 restrictor-blade(s) Constant velocity PTO-shaft Wear ring Low drawbar Cross conveyor belt at front 2 wide wheels Control by bowdencable Hydraulic brakes Cross conveyor belt at the back of the machine as an option. 800 VLH-B 1000 VLH-B 1000L VLH-B Conveyor belt at front Capacity Cu. Ft 280 350 350 Overall length Inch 187" 190" 196" Width Inch 91" 91" 96" Overall height Inch 98" 109" 98" Width outside wheels Inch 75" 75" 83" height Inch 30" 29" 29" Net weight Lbs 7,800 8,250 7,610 Maximum load Lbs 7,720 8,820 9,920 Number of auger knive positions 8 9 9 Number of knives mounted per auger 5 6 6 Power requirement PTO HP 66 68 75 Tires (2 x) 400/45 L 17.5 PTO Drive 540 RPM Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Electric operation Hydraulic restrictor blades Hydraulic jack Reduction gearbox Hay ring Lighting set Cross conveyor belt at the rear Mineral chute Speed regulator conveyor belt TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with single auger and cross conveyor belt at front 1 2 0 0-1 4 0 0 V L H - B Belt conveyor extension. 18 19 Conveyor belt at front Capacity Cu. Ft 430 500 Overall length Inch 192" 203" Width Inch 97" 96" Overall height Inch 116" 119" Width outside wheels Inch 75" 83" height Inch 29" 29" Net weight Lbs 8,930 10,010 Maximum load Lbs 9,920 11,020 Number of auger knive positions 10 12 Number of knives mounted per auger 7 9 Power requirement PTO HP 75 82 Tires (2 x) 400/45 L 17.5 PTO Drive 540 RPM Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Required tractor hydraulic 1 single acting valve

Solomix P1 1 0 0 0-1 4 0 0 Z K Mixer feeder with single auger, side discharge doors and straw bedder at front Standard features Mechanically driven straw bedder at front 1 Twin Stream auger Trioform auger knives 2 restrictor blades Constant velocity PTO shaft Wear ring Adjustable drawbar Two large discharge doors Manual adjustable discharge chutes Flexible and spacious side door covers Two wide wheels Electric operation Hydraulic brake system Electric operation as an standard feature. Dust control by water spray nozzle bank installed in blower pipe. 1000 ZK 1200 ZK 1400 ZK 2 Side discharge doors + straw bedder at front Capacity Cu. Ft 350 430 500 Overall length Inch 197" 201" 215" Width Inch 98" 98" 106" Overall Height Inch 109" 117" 119" Width outside wheels Inch 75" 75" 83" height* Inch 32" 32" 32" Distribution width strawbedder** Ft 70-80 Net weight Lbs 8,620 9,060 9,920 Maximum load (techn.) Lbs 8,820 9,920 9,920 Number of auger knive positions 9 9 12 Number of knives mounted per auger 6 6 6 PTO Drive RPM 540 540 540 Required hydraulic capacity HP 71 75 82 Tires (2 x) 400/45 L 17.5 Required hydraulic capacity 5 gallons/min. 2,500 psi Required tractor hydraulic 1 single acting valve * Without chute ** Depending on circumstances Options Electronic weighing system Hydraulic restrictor blades Hydraulic jack Reduction gearbox Hay ring Chain conveyor Lighting set Pivoting discharge chute Mineral chute Dust control TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with two augers and side discharge doors on both sides (front) Standard features 2 Twin Stream augers Trioform auger knives 2 restrictor-blades Constant velocity PTO-shaft Wear ring Adjustable drawbar Two large discharge doors Dual Flow Manual adjustable discharge chutes Flexible and spacious side door covers Two wide wheels (1200-2400) Two double wheels (2400 L) Direct operation by tractor hydraulics Hydraulic brake system Fast and even distribution. 20 21 2 Side discharge doors Capacity Cu. Ft 430 540 570 570 650 715 715 860 860 Overall length Inch 236" 250" 252" 268" 270" 272" 286" 274" 290" Overall width Inch 88" 92" 92" 97" 96" 96" 105" 99" 108" Overall height Inch 99" 104" 109" 106" 111" 119" 106" 127" 119" Width outside wheels Inch 67" 75" 75" 84" 84" 84" 84" 84" 93" height* Inch 32" 32" 32" 37" 37" 37" 37" 37" 38" Net weight Lbs 10,800 11,680 12,130 12,790 13,230 14,550 14,770 15,650 18,520 Maximum load Lbs 9,920 11,020 11,020 14,380 16,530 15,210 14,990 15,210 16,750 Number of auger knive positions 7 8 8 8 8 8 8 10 10 Number of knives mounted per auger 4 5 5 5 5 5 5 7 7 Power requirement PTO HP 82 85 85 102 102 102 112 109 120 Tires 400/45 L 17.5 (2 x) 435/50 R 19.5 (2 x) 275/70 R 22.5 (4 x) PTO Drive 540 RPM Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Required tractor hydraulic 2 double acting valves * Without chute Options Hay ring Shifttronic 2-speed reduction gearbox Electronic weighing system Chain conveyor TC knives Electric operation Bowden cable control Long Trioform auger knives Hydraulic restrictor blades Lighting set 7/8" auger flights Hydraulic jack Mineral chute Magnets Reduction gearbox Pivoting discharge chute

Mixer feeder with two augers and flat chain conveyor at front Standard features 2 Twin Stream augers Trioform auger knives 2 Restrictor blades Dual discharge flat chain conveyor Constant velocity PTO shaft Wear ring Dual Flow Adjustable and reversable drawbar Bowden cable operation Two wide wheels Hydraulic brake system Chain conveyor at front Capacity Cu. Ft 430 540 570 570 650 715 715 860 Overall length Inch 241" 257" 258" 274" 277" 279" 294" 283" Width Inch 90" 90" 90" 91" 90" 90" 96" 96" Overall height Inch 99" 104" 109" 106" 111" 119" 106" 127" Width outside wheels Inch 67" 75" 75" 84" 84" 84" 84" 84" Length chain conveyor Inch 91" 91" 91" 91" 91" 91" 96" 91" height Inch 30" 29" 29" 34" 34" 34" 35" 35" Height bottom of chain Inch 21" 21" 21" 26" 26" 26" 26" 26" Net weight Lbs 11,020 12,350 12,570 13,670 13,670 15,210 15,210 16,310 Maximum load Lbs 9,920 11,020 11,020 13,500 16,090 14,550 14,550 14,550 PTO Drive 540 540 540 540 540 540 540 540 Number of auger knive positions 7 8 8 8 8 8 8 10 Number of knives mounted per auger 4 5 5 5 5 5 5 7 Power requirement PTO HP 82 85 85 102 102 102 112 120 Tires (2 x) 400/45 L 17.5 435/50 R 19.5 Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Electric operation Hydraulic restrictor blades Hydraulic jack Reduction gearbox Hay ring Lighting set Shifttronic 2-speed reduction gearbox Mineral chute chain with side shift Speed regulator chain conveyor TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with two augers and flat chain conveyor at front Standard features 2 Twin Stream augers Trioform auger knives 2 Restrictor blades Constant velocity PTO shaft Wear ring Dual Flow Adjustable and reversable drawbar Dual discharge flat chain conveyor Bowden cable control Walking tandem axle with four wheels Hydraulic brake system 22 23 Chain conveyor at front Capacity Cu. Ft 715 860 Overall length Inch 279" 283" Width Inch 96" 96" Overall height Inch 120" 129" Width outside wheels Inch 73" 73" Length chain conveyor Inch 91" 91" height Inch 36" 37" Height bottom of chain Inch 27" 27" Net weight Lbs 15,870 16,980 Maximum load Lbs 19,400 22,050 Number of auger knive positions 8 10 Number of knives mounted per auger 5 7 PTO Drive 540 540 Power requirement PTO HP 102 109 Tires (4 x)) 295/60 R 22.5 Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Electric operation Hydraulic restrictor blades Hydraulic jack Reduction gearbox Hay ring Lighting set Mineral chute Chain conveyor with side shift Shifttronic 2-speed reduction gearbox Speed regulator chain conveyor TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with two augers and curved cross chain conveyor at front Standard features 2 Twin Stream augers Trioform auger knives 2 Restrictor blades Constant velocity PTO shaft Wear ring Dual Flow Adjustable and reversable drawbar Curved cross chain conveyor at front L=91" with side shift Bowden cable control Two wide wheels Hydraulic brake system Rapid discharge. Curved cross chain conveyor with side shift at front Capacity Cu. Ft 430 540 570 570 650 715 715 860 Overall length Inch 241" 257" 258" 275" 277" 279" 294" 283" Overall width Inch 91" 91" 91" 91" 91" 91" 100" 96" Overall height Inch 99" 104" 109" 106" 104" 109" 106" 127" Width outside wheels Inch 67" 75" 75" 84" 84" 84" 84" 84" Lenght cross conveyor Inch 91" 91" 91" 91" 91" 91" 100" 91" height (center position) Inch 34" 38" 38" 43" 44" 44" 46" 44" height (side shifted) Inch 48" 48" 48" 53" 53" 53" 56" 53" Height bottom of conveyor (retracted) Inch 32" 32" 32" 32" 37" 37" 40" 37" Height bottom of conveyor (side shifted) Inch 41" 41" 41" 46" 46" 46" 50" 46" Net weight Lbs 11,020 12,350 12,570 13,670 13,670 15,210 15,210 16,310 Maximum load (techn.) Lbs 9,920 11,020 11,020 13,500 16,090 14,550 14,550 14,550 PTO Drive 540 540 540 540 540 540 540 540 Number of auger knive positions 7 8 8 8 8 8 8 10 Number of knives mounted per auger 4 5 5 5 5 5 5 7 Power requirement PTO HP 82 85 85 102 102 102 112 120 Tires (2 x) 400/45 L 17.5 435/50 R 19.5 Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Reduction gearbox Electric operation Hydraulic jack Lighting set Off set clevis Hay ring Tire options Heavy Duty PTO shaft Shifttronic 2-speed reduction gearbox TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with two augers and curved cross chain conveyor at front Standard features 2 Twin Stream augers Trioform auger knives 2 Restrictor blades Constant velocity PTO shaft Wear ring Dual Flow Adjustable drawbar Curved cross chain conveyor at front L=90" with side shift Walking tandem axle with four wheels Bowden cable control Hydraulic brake system 24 25 Curved cross chain conveyor with side shift at front Capacity Cu. Ft 715 860 Overall length Inch 279" 281" Overall width Inch 91" 96" Overall height Inch 120" 129" Width outside wheels Inch 72" 72" Lenght cross conveyor Inch 91" 91" height (center position) Inch 45" 45" height (side shifted) Inch 54" 54" Height bottom of conveyor (retracted) m 39" 39" Height bottom of conveyor (side shifted) Inch 47" 47" Net weight Lbs 15,870 16,980 Maximum load (techn.) Lbs 19,400 22,050 Number of auger knive positions 8 10 Number of knives mounted per auger 5 7 PTO Drive 540 540 Power requirement PTO HP 102 109 Tires (4 x) 295/60 R 22.5 Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Lighting set TC knives Reduction gearbox Off set clevis Long Trioform auger knives Electric operation Hay ring 7/8" auger flights Hydraulic jack Shifttronic 2-speed reduction gearbox Magnets

Mixer feeder with two augers and cross conveyor belt at front 1 0 0 0-1 2 0 0 V L L - B Standard features 2 Twin Stream augers Trioform auger knives 2 restrictor-blades Constant velocity PTO-shaft Wear ring Adjustable drawbar Dual Flow Wide discharge unit (39") with conveyor belt (for 1200L-2000) 2 windows in discharge unit (1200L-2000) 2 large wheels Control by bowden cable Hydraulic brake system A discharge door at the back of the machine as an option. Bowden cable operation as a standard feature. Conveyor belt at front Capacity Cu. Ft 350 430 Overall length Inch 219" 222" Width Inch 85" 85" Overall height Inch 95" 105" Width outside wheels Inch 80" 80" height Inch 22" 22" Net weight Lbs 7,540 9,700 Maximum load Lbs 8,820 9,920 Power requirement PTO HP 66 66 Number of auger knive positions 6 7 Number of knives mounted per auger 3 4 Tires (2 x) 315/80-22.5 18 Ply PTO Drive 540 RPM Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Required tractor hydraulic 1 single acting valve Options Electronic weighing system Hydraulic restrictor blades Reduction gearbox Hydraulic jack Elevated belt extension Electric operation Hay ring Lighting set Mineral chute TC knives Long Trioform auger knives 7/8" auger flights Magnets

Solomix 2 1 2 0 0 ( L ) - 2 0 0 0 ( L ) V L L - B Mixer feeder with two augers and cross conveyor belt at front 26 27 Conveyor belt at front Capacity Cu. Ft 430 500 570 570 650 715 Overall length Inch 256" 259" 262" 279" 281" 283" Overall width Inch 90" 90" 90" 96" 96" 96" Overall height Inch 97" 109" 116" 102" 108" 116" Width outside wheels Inch 90" 90" 90" 96" 96" 96" height Inch 22" 22" 22" 22" 22" 22" Net weight Lbs 10,690 13,120 13,560 13,670 14,660 15,100 Maximum load Lbs 11,020 12,680 14,000 13,890 15,650 17,090 Power requirement PTO HP 75 75 82 85 85 96 Number of auger knive positions 7 8 8 8 8 8 Number of knives mounted per auger 4 5 5 5 5 5 Tires (2 x) 385/65-22.5 18 Ply PTO Drive 540 RPM Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve

Mixer feeder with two augers and cross conveyor chain at front 1 2 0 0 ( L ) - 2 0 0 0 ( L ) V L L - K Standard features 2 Twin Stream augers Trioform auger knives 2 restrictor-blades Constant velocity PTO-shaft Wear ring Adjustable drawbar Dual Flow Wide discharge unit (38") with chain conveyor 2 windows in discharge unit 2 large wheels Control by bowden cable Hydraulic brake system 1200L VLL-K 1400 VLL-K 1600 VLL-K 1600L VLL-K 1800 VLL-K 2000 VLL-K Chain conveyor at front Capacity Cu. Ft 430 500 570 570 650 715 Overall length Inch 256" 259" 262" 279" 281" 283" Overall width Inch 90" 90" 90" 96" 96" 96" Overall height Inch 97" 109" 116" 102" 108" 116" Width outside wheels Inch 90" 90" 90" 96" 96" 96" height Inch 22" 22" 22" 22" 22" 22" Net weight Lbs 10,910 13,340 13,780 14,000 14,880 15,320 Maximum load Lbs 11,020 12,460 13,780 13,560 15,430 16,870 Power requirement PTO HP 75 75 82 85 85 96 Number of auger knive positions 7 8 8 8 8 8 Number of knives mounted per auger 4 5 5 5 5 5 Tires (2 x) 385/65-22.5 18 Ply PTO Drive 540 RPM Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Hydraulic restrictor blades Reduction gearbox Hydraulic jack Electric operation Hay ring Lighting set Mineral chute TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with two augers and curved cross chain conveyor at front 1 2 0 0 ( L ) - 2 0 0 0 ( L ) V L L - C Standard features 2 Twin Stream augers Trioform auger knives 2 restrictor-blades Constant velocity PTO-shaft Wear ring Adjustable drawbar Dual Flow Wide discharge unit (34") with curved chain conveyor 2 windows in discharge unit 2 large wheels Control by bowden cable Hydraulic brake system 1200L VLL-C 1400 VLL-C 1600 VLL-C 1600L VLL-C 1800 VLL-C 2000 VLL-C 28 29 Curved chain conveyor at front Capacity Cu. Ft 430 500 570 570 650 715 Overall length Inch 256" 259" 262" 279" 281" 283" Overall width Inch 90" 90" 90" 96" 96" 96" Overall height Inch 97" 109" 116" 102" 108" 116" Width outside wheels Inch 90" 90" 90" 96" 96" 96" height Inch 22" 22" 22" 22" 22" 22" Net weight Lbs 10,910 13,340 13,780 14,000 14,880 15,320 Maximum load Lbs 11,020 12,460 13,780 13,560 15,430 16,870 Power requirement PTO HP 75 75 82 85 85 96 Number of auger knive positions 7 8 8 8 8 8 Number of knives mounted per auger 4 5 5 5 5 5 Tires (2 x) 385/65-22.5 18 Ply PTO Drive 540 RPM Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Hydraulic restrictor blades Reduction gearbox Hydraulic jack Electric operation Hay ring Lighting set Mineral chute TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with two augers and adjustable chain conveyor at front 1 2 0 0 ( L ) - 2 0 0 0 ( L ) V L L - S Standard features 2 Twin Stream augers Trioform auger knives 2 restrictor-blades Constant velocity PTO-shaft Wear ring Adjustable drawbar Dual Flow Adjustable conveyor chain at front 2 windows in discharge unit 2 large wheels Control by bowden cable Hydraulic brake system by height adjustable chain conveyor. Easy to load by skid steer. 1200L VLL-C 1400 VLL-C 1600 VLL-C 1600L VLL-C 1800 VLL-C 2000 VLL-C Adjustable chain conveyor at front (right) Capacity Cu. Ft 430 500 570 570 650 715 Overall length Inch 256" 259" 262" 279" 281" 283" Overall width Inch 90" 90" 90" 96" 96" 96" Overall height Inch 97" 109" 116" 102" 108" 116" Width outside wheels Inch 90" 90" 90" 96" 96" 96" height Inch 35"-43" 35"-43" 35"-43" 35"-43" 35"-43" 35"-43" Standard lenght of chain conveyor Ft 3 ft. 3 ft. 3 ft. 3 ft. 3 ft. 3 ft. Wide of chain conveyor Inch 39" 39" 39" 39" 39" 39" Net weight Lbs 11,240 13,670 14,110 14,110 15,100 15,540 Maximum load Lbs 11,020 12,130 13,450 13,450 15,210 16,640 Power requirement PTO HP 75 75 82 85 85 96 Number of auger knive positions 7 8 8 8 8 8 Number of knives mounted per auger 4 5 5 5 5 5 Tires (2 x) 385/65-22.5 18 Ply PTO Drive 540 RPM Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Hydraulic restrictor blades Reduction gearbox Hydraulic jack Electric operation Hay ring Lighting set Mineral chute TC knives Long Trioform auger knives 7/8" auger flights Magnets

Solomix P2 1 2 0 0-2 8 0 0 Z K ( X ) ( T ) Mixer feeder with two augers, side discharge doors and straw bedder at front Standard features Mechanically driven straw bedder at front 2 Twin Stream auger Trioform auger knives 2 or 4 (2800) restrictor blades Constant velocity PTO shaft Wear ring Dual Flow Adjustable drawbar Two large discharge doors Manual adjustable discharge chutes Flexible and spacious side door covers Electric operation Two wide wheels Hydraulic brake system 1000 RPM reduction gearbox (2400L/2800) Pre-mix door with activation kit (2800) Walking tandem axle with 4 wheels (2400-2800) Electric operation as an standard feature. Dust control by water spray nozzle bank installed in blower pipe. 30 31 1200 ZK 1600 ZK 1800 ZK 2000 ZK 2400 ZK-T 2400L ZKX-T 2800 ZKX-T 2 Side discharge doors + straw bedder at front Capacity Cu. Ft 430 570 650 715 860 860 1,000 Overall length Inch 250" 267" 284" 296" 298" 316" 318" Width Inch 88" 92" 97" 97" 98" 108" 108" Overall Height Inch 98" 109" 111" 118" 128" 118" 135" Width outside wheels Inch 67" 75" 85" 85" 74" 79" 87" height* Inch 32" 33" 37" 38" 39" 40" 46" Distribution width strawbedder** Ft 70-80 ft. Net weight Lbs 11,960 13,780 14,160 15,600 17,580 21,270 24,360 Maximum load (techn.) Lbs 9,920 11,020 15,430 15,430 22,050 22,820 19,730 Number of auger knive positions 7 8 8 8 10 10 12 Number of knives mounted per auger 4 5 5 5 7 7 9 PTO Drive RPM 540 540 540 540 540 1,000 1,000 Required hydraulic capacity HP 82 85 102 102 109 120 130 Tires (2 x) 435/50 R 19.5 Tires (4 x) 295/60 R 435/50 R 385/65 R 22.5 19.5 22.5 18 Ply Required hydraulic capacity 5 gallons/min. 2,500 psi Required tractor hydraulic 1 single acting valve * Without chute ** Depending on circumstances Options Electronic weighing system Hydraulic restrictor blades Hydraulic jack Reduction gearbox Hay ring Chain conveyor Lighting set Pivoting discharge chute Mineral chute Dust control TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with two augers and cross conveyor belt at front Standard features 2 Twin Stream augers Trioform auger knives 2 restrictor-blades Constant velocity PTO-shaft Adjustable drawbar Wear ring Dual Flow Front conveyor belt Two wide wheels Control by bowden cable Hydraulic brake system Fast and even discharge. Conveyor belt at front Capacity Cu. Ft 430 540 570 570 650 715 715 860 Overall length Inch 242" 259" 260" 274" 277" 281" 295" 283" Overall width Inch 85" 90" 90" 91" 91" 91" 96" 96" Overall height Inch 99" 104" 109" 106" 111" 119" 105" 127" Width outside wheels Inch 67" 75" 75" 84" 84" 84" 84" 84" height Inch 30" 29" 29" 34" 35" 35" 35" 35" Net weight Lbs 11,020 12,350 12,570 13,670 13,670 15,210 15,210 16,310 Maximum load (techn.) Lbs 9,920 11,020 11,020 13,500 16,090 14,550 14,550 14,550 Power requirement PTO HP 82 85 85 102 102 102 112 109 Number of auger knive positions 7 8 8 8 8 8 8 10 Number of knives mounted per auger 4 5 5 5 5 5 5 7 Tires 400/45 L 17.5 (2 x) 435/50 R 19.5 (2 x) Required hydraulic capacity 5 gallons/min. 2,500 psi Required tractor hydraulic 1 single acting valve Options Electronic weighing system Hydraulic restrictor blades Reduction gearbox Hydraulic jack Elevated belt extension Electric operation Hay ring Lighting set Shifttronic 2-speed reduction gearbox Mineral chute Conveyor belt at the back (ALH-B) TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with two augers and cross conveyor belt at front Standard features 2 Twin Stream augers Trioform auger knives 2 restrictor-blades Constant velocity PTO-shaft Adjustable drawbar Wear ring Dual Flow Front conveyor belt Walking tandem axle with four wheels Bowden cable control Hydraulic brake system VLH-B-T is standard equipped with four single wheels on a reciprocating tandem. Easy handling of round bales. 32 33 Conveyor belt at front Capacity Cu. Ft 715 860 Overall length Inch 279" 281" Width Inch 91" 96" Overall height Inch 120" 128" Width outsides wheels Inch 73" 73" height Inch 36" 36" Net weight Lbs 15,870 16,980 Maximum Load Lbs 19,400 22,050 Power requirement PTO HP 102 109 Number of auger knive positions 8 10 Number of knives mounted per auger 5 7 Tires (4 x) 295/60 R 22.5 PTO Drive 540 RPM Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve Options Electronic weighing system Reduction gearbox Electric operation Hydraulic restrictor blades Hydraulic jack Elevated belt extension Lighting set Hay ring Mineral chute Tire options Shifttronic 2-speed reduction gearbox TC knives Long Trioform auger knives 7/8" auger flights Magnets

2 0 0 0-2 4 0 0 ( L ) Z K - T Mixer feeder with two augers and side discharge doors on both sides (front) Standard features 2 Twin Stream augers Trioform auger knives 2 restrictor-blades Constant velocity PTO-shaft Adjustable drawbar Wear ring Dual Flow Two large discharge doors Manual adjustable discharge chute Flexible and spacious side door covers Walking tandem axle with four wheels Direct operation by tractor hydraulics Hydraulic brake system Mineral chute as an option. Walking tandem axle with 4 wheels. doors on both sides (front) Capacity Cu. Ft 715 715 860 Overall length Inch 272" 286" 274" Overall width Inch 96" 105" 98" Overall height Inch 120" 107" 129" Width outside wheels Inch 73" 73" 73" height* Inch 39" 39" 40" Net weight Lbs 15,430 15,540 16,640 Maximum Load Lbs 19,840 22,050 22,050 Number of auger knive positions 8 8 10 Number of knives mounted per auger 5 5 7 Power requirement PTO HP 102 112 109 PTO Drive RPM 540 540 540 Tires (4 x) 295/60 - R 22.5 Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 2 double acting valves * Without chute Options Electronic weighing system Hydraulic restrictor Mineral chute Tire options Reduction gearbox blades Shifttronic 2-speed reduction TC knives Electric operation Offset clevis gearbox Long Trioform auger knives Bowden cable operation Lighting set chain conveyor 7/8" auger flights Hydraulic jack Hay ring Pivoting discharge chute Magnets

Mixer feeder with two augers and side discharge doors on both sides (front) Standard features 2 Twin Stream augers Trioform auger knives 2 or 4 restrictor-blades 1000 RPM wide angle PTO shaft Adjustable drawbar Wear ring Dual Flow Two large discharge doors Manual adjustable discharge chute Flexible and spacious side door covers Walking tandem axle with four wheels Reduction gearbox Premix-door at the back Direct operation by tractor hydraulics Hydraulic brake system Complete regular discharge by new type of discharge doors. 34 35 doors on both sides (front) Capacity Cu. Ft 860 1,000 1,100 Overall length Inch 290" 296" 313" Overall width Inch 108" 107" 116" Overall height Inch 119" 135" 135" Width outside wheels Inch 79" 86" 86" height* Inch 40" 47" 47" Net weight Lbs 18,850 22,380 24,250 Maximum load (techn.) Lbs 29,650 24,250 24,250 Number of auger knive positions 10 12 12 Number of knives mounted per auger 7 9 9 Power requirement PTO HP 120 130 150 PTO Drive RPM 1,000 1,000 1,000 Tires (4 x) 435/50 R 19.5 385/65 R 22.5 18 Ply Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 2 double acting valves * Without chute Options Electronic weighing system Top knife bracket Shifttronic 3-speed reduction gearbox Electric operation Offset clevis TC knives Hydraulic restrictor blades Mineral chute Long Trioform auger knives Hydraulic jack chain conveyor Magnets Lighting set Pivoting discharge chute Hay ring

Mixer feeder with two augers and cross conveyor chain at front Standard features 2 Twin Stream augers Trioform auger knives 2 or 4 restrictor-blades 1000 RPM wide angle PTO shaft Wear ring Dual Flow Large door opening at front with heavy-duty chain conveyor Adjustable drawbar Walking tandem axle with four wheels Reduction gearbox Premix-door at the back Direct operation by tractor hydraulics Hydraulic brake system Conveyor chain at front Capacity Cu. Ft 860 1,000 1,150 Overall length Inch 320" 322" 339" Overall width Inch 117" 116" 117" Overall height Inch 119" 135" 135" Width outside wheels Inch 79" 87" 87" height Inch 35" 41" 41" Net weight Lbs 21,270 25,570 26,900 Maximum load (techn.) Lbs 27,230 22,930 25,130 Number of auger knive positions 10 12 12 Number of knives mounted per auger 7 9 9 Power requirement PTO HP 120 130 150 PTO Drive RPM 1,000 1,000 1,000 Tires (4 x) 435/50 R 19.5 385/65 R 22.5 Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 2 double acting valves Options Electronic weighing system Electric operation Hydraulic restrictor blades Hydraulic jack Hay ring Lighting set Cooling system Offset clevis Mineral chute TC knives Shifttronic 3-speed reduction gearbox Long Trioform auger knives Magnets Top knife bracket

Mixer feeder with two augers and cross conveyor belt at front 2 4 0 0-3 2 0 0 ( L ) V L X - B - T Standard features 2 Twin Stream augers Trioform auger knives 2 or 4 restrictor-blades 1000 RPM wide angle PTO shaft Wear ring Dual Flow Large door opening at front with heavy-duty belt conveyor Adjustable drawbar Walking tandem axle with four wheels Reduction gearbox Premix-door at the back Direct operation by tractor hydraulics Hydraulic brake system VLX-B-T with belt conveyor at front. Easy handling of big bales. 36 37 2400L VLX-B-T 2800 VLX-B-T 3200 VLX-B-T Conveyor belt at front Capacity Cu. Ft 860 1,000 1,150 Overall length Inch 320" 322" 339" Overall width Inch 114" 116" 115" Overall height Inch 119" 135" 135" Width outside wheels Inch 79" 87" 87" height Inch 35" 42" 42" Net weight Lbs 21,270 25,570 26,900 Maximum load (techn.) Lbs 27,230 22,930 25,130 Number of auger knive positions 10 12 12 Number of knives mounted per auger 7 9 9 Power requirement PTO HP 120 130 150 PTO Drive RPM 1,000 1,000 1,000 Tires (4 x) 435/50 R 19.5 385/65 R 22.5 Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 2 double acting valves Options Electronic weighing system Electric operation Hydraulic restrictor blades Hydraulic jack Hay ring Lighting set Cooling system Offset clevis Mineral chute TC knives Shifttronic 3-speed reduction gearbox Long Trioform auger knives Magnets Top knife bracket

Mixer feeder with three augers and two discharge doors on right hand side 3 6 0 0-5 2 0 0 ( L ) Z K X - T ( R ) Standard features 3 Twin Tream augers Trioform auger knives 2 restrictor-blades 1000 RPM wide angle PTO shaft Adjustable drawbar Two large discharge doors (RHS) Manual adjustable discharge chute Flexible and spacious side door covers Wear ring Dual Flow Tandem axle (3600/4000L/4600) Tridem axles with forced steering (4600/5200) 1,000 RPM Speed reduction gearbox (3600-4600) Shifttronic 3-speed gearbox with weighing system (5200) Premix-door at the back Direct operation by tractor hydraulics Hydraulic brake system Shifttronic 3-speed reduction gearbox. 2 discharge doors on right side Capacity Cu. Ft 1,285 1,415 1,650 1,650 1,860 Overall length Inch 365" 390" 393" 393" 431" Overall width Inch 105" 117" 117" 117" 118" Overall height Inch 133" 128" 143" 139" 142" Width outside wheels Inch 90" 90" 96" 88" 104" height* Inch 44" 44" 49" 46" 47" Net weight Lbs 30,640 33,290 36,160 36,160 45,190 Maximum load (techn.) Lbs 35,490 32,850 41,010 41,010 49,600 Number of auger knive positions 10 10 12 12 12 Number of knives mounted per auger 7 7 9 9 9 Power requirement PTO HP 177 191 204 204 240 PTO Drive RPM 1,000 1,000 1,000 1,000 1,000 Tires 275/70 R 22.5 315/80 R 22.5 435/50 R 19.5 315/80 R 22.5 Wheel system (Tires) Tandem (8 x) Tandem (8 x) Tandem (8 x) Tridem (6 x) Tridem (12 x) Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 2 double acting valves * Without chute Options Electronic weighing system Electric operation Hydraulic restrictor blades Lighting set LED Hay ring Cooling system Shifttronic 3-speed reduction gearbox (3600-4600) chain conveyor TC knives Long Trioform auger knives Magnets

Solomix P3 ZKX Mixer feeder with two discharge doors and straw bedder at front 3 6 0 0 Standard features 3 Twin Stream augers Trioform auger knives Mechanically driven straw bedder at front Low blower pipe with hydraulic operation Adjustable drawbar 1,000 RPM wide angle PTO shaft Two restrictor blades Dual Flow Walking tandem axle with 8 dual tires 1,000 RPM reduction gearbox standard Two large discharge doors at front Manual adjustable discharge chute Right, left or dual discharge Electric operation Wear ring Pre-mix door without activation kit 3600 ZKX 38 39 doors In front and back RHS Capacity Cu. Ft 1,285 Overall length Inch 384" Overall width Inch 105" Overall height Inch 133" Width outside wheels Inch 90" height* Inch 45" Width of discharge door Inch 36" Net weight Lbs 31,970 Maximum load (techn.) Lbs 34,170 Number of auger knive positions 10 Number of knives mounted per auger 7 Power requirement PTO HP 177 PTO Drive RPM 1,000 Tires (4 x) 275/70 R22.5 Scale system 3-point Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 1 single acting valve * Without chute Options Electronic weighing system Hydraulic restrictor blades Hydraulic jack Reduction gearbox Hay ring Chain conveyor Lighting set Pivoting discharge chute Mineral chute Dust control TC knives Long Trioform auger knives 7/8" auger flights Magnets

Mixer feeder with three augers and cross conveyor chain at front 3 6 0 0-4 6 0 0 ( L ) V L X - K - T ( R ) Standard features 3 Twin Stream augers Trioform auger knives 2 Restrictor blades Adjustable drawbar Chain conveyor with Heavy Duty chain (L=114") for discharge at both sides Reduction gearbox Wear ring Dual Flow Wide angle PTO-shaft with overload clutch (1¾"-20 tractor connection) Tandem axle (3600/4000L/4600) Tridem axle with forced steering (4600) Pre-mix rear door without activation kit Directly operated by tractor hydraulics Hydraulic brake system Chain conveyor at front Capacity Cu. Ft 1,285 1,415 1,650 1,650 Overall length Inch 391" 417" 417" 417" Overall width (91" conveyor) Inch 105" 105" 117" 117" Overall width (114" conveyor) Inch 118" 118" 117" 117" Overall height Inch 133" 128" 143" 139" Width outside wheels Inch 91" 91" 96" 88" height Inch 40" 40" 53" 41" Net weight Lbs 33,950 34,390 37,260 40,120 Maximum load (techn.) kg 32,190 31,570 39,900 37,040 Number of auger knive positions 10 10 12 12 Number of knives mounted per auger 7 7 9 9 Power requirement PTO HP 177 191 204 204 PTO Drive RPM 1,000 1,000 1,000 1,000 Tires 275/70 R 22.5 (4 x) 315/80 R 22.5 (4 x) 435/50 R 19.5 (6 x) Wheel system (Tires) Tandem Tandem Tandem Tridem Required hydraulic capacity 5 gallons/min. 2,500 psi Tractor hydraulic requirements 2 double acting valves Options Electronic weighing system Electric operation Hydraulic restrictor blades Lighting set LED Hay ring Top knife bracket Shifttronic 3-speed reduction gearbox Mineral chute TC knives Long Trioform auger knives Magnets

Mixer feeder with three augers and cross conveyor belt at front Standard features 3 Twin Stream augers Trioform auger knives 2 restrictor-blades 1000 RPM wide angle PTO shaft Adjustable drawbar Front conveyor belt Wear ring Dual Flow Tandem axle (3600/4000L/4600) Tridem axle with forced steering (4600) Speed reduction gearbox Premix-door at the back Direct operation by tractor hydraulics Hydraulic brake system Unique three auger system with offset inserts. 40 41 4600 VLX-B-TR Conveyor belt at front Capacity Cu. Ft 1,285 1,415 1,650 1,650 Overall length Inch 391" 417" 417" 417" Width Inch 114" 117" 117" 117" Overall Height Inch 133" 128" 143" 137" Width outside wheels Inch 91" 91" 96" 88" height Inch 40" 40" 53" 41" Net weight Lbs 33,950 34,390 37,260 40,120 Maximum load (techn.) Lbs 32,190 31,750 39,900 37,040 Number of auger knive positions 10 10 12 12 Number of knives mounted per auger 7 7 9 9 Power requirement PTO HP 177 191 204 204 PTO Drive RPM 1,000 1,000 1,000 1,000 Tires 275/70 R 22.5 275/70 R 22.5 315/80 R 22.5 435/50 R 19.5 Wheel system (Tires) Tandem (8 x) Tandem (8 x) Tandem (8 x) Tridem (6 x) Required hydraulic capacity 5 gallons/min. 2,500 psi Required tractor hydraulic 2 double acting valves Options Electronic weighing system Electric operation Hydraulic restrictor blades Lighting set LED Shifttronic 3-speed reduction gearbox Hay ring Top knife bracket Mineral chute TC knives Magnets Long Trioform auger knives

Shifttronic 2-speed and 3-speed reduction gearbox Easy mixer start up Start up of big size mixers at full loads cause a lot of stress on the tractor PTO clutch and drive line. With the Trioliet Shifttronic 2 or 3-speed reduction gearbox a start up is done at a low mixer speed and requires less than a third of the energy. From this initial start up speed the gearbox shifts on the go automatically to the programmed speed. Shifts 'ON-THE-GO' according to feed weight (automatic shifting) An electronic control box allows you to programm in 5 different mixing cycles (e.g. premix, milk cows, heifers) determining at which feed weight the gearbox shifts. This enables e.g.: fast cutting of dry hay in a right dry cow heifer ration. a reduced speed in a premix ration to save your tractor and reduce fuel cost. automatic speed up at the end of the discharge cycle for regular, fast and efficient clean out. Control box for 2 and 3 speed Shifttronic 2-speed TECHNICAL DATA SHIFTTRONIC 2-SPEED Input speed 540 or 1000 RPM Maximum power input 180 HP Gearbox ratio's I 1.74 : 1 (auger 22 rpm) II 1 : 1 (auger 39 rpm) Control by Shifttronic control box Standard oil cooling Suitable for all Trioliet mixer feeders from 650 1,060 cu.ft. Typical use of the Shifttronic 2-speed