LED Lighting & Supply Catalog Commercial Truck Lighting & Accessories
HEAVY DUTY LIGHTING / WARRANTY & RETURNS WARRANTY Heavy Duty Lighting (HDL) warranties each new product to the Original Purchaser (1), under normal use and service, to be free from defects of material and/or workmanship only, for Five Years from the date of manufacture stamped on the product (2), unless otherwise noted*. Warranties are not transferable and apply only to the original owner of the HDL product. During this warranty period, the obligation of HDL is limited to repairing or replacing, as HDL may elect, any part or parts of such product which after examination by HDL, are found to be defective as the result of a defect in material and/or workmanship. HDL will provide warranty for any unit which is delivered, transported prepaid, to the specified HDL facility or designated authorized warranty service center for examination and such examination reveals a defect in material and/or workmanship. This warranty does not cover travel expenses, the cost of specialized equipment for gaining access to the product, or labor charges for removal and re-installation of the product. Corroded connectors and broken or discolored lenses are not covered under warranty. Many states are using Magnesium Chloride or Calcium Chloride as de-icers, which cause severe corrosive action to electrical components. Due to the nature of our products, exposure to the elements and harsh chemicals can damage the finish. Care must be taken to ensure these products maintain their shine and finish. HDL will not be responsible for products damaged by alterations, misuse, abuse, accidents, improper installation or damage due to exposure to harsh chemicals and cleaning agents which can damage the plastics, rubber, chrome and stainless steel. Unless otherwise stated, HDL will not accept corrosion as a warranty claim. This warranty is in lieu of all other warranties, express or implied, including warranties of merchantability and fitness for a purpose. Original Purchaser is the Distributor to whom Heavy Duty Lighting initially sold the product. Some products are produced without date stamps. In the event a product was produced without a date stamp the documented Date of Purchase to the original purchaser may be required. *Otherwise Noted / 1 Year Warranty Heavy Duty Lighting product group - LED Replacement Style Bulbs (HD1156/1157& HD3156/3157 series). Because of the design of this product (non-sealed or potted) and the multiple applications and vehicles this product is used in, it carries only a one year product warranty. With the exception of time, one year compared to five year, the warranty & returns policy for this product is the same in all other aspects as the standard HDL warranty and returns policy. Heavy Duty Lighting product group - Electronic LED Flashers (HDF series). This product group carries only a one year product warranty. With the exception of time, one year compared to five year, the warranty & returns policy for this product is the same in all other aspects as the standard HDL warranty and returns policy. Heavy Duty Lighting product group - AC to DC Power Adaptor (HDLC series). This product group carries only a one year product warranty. With the exception of time, one year compared to five year, the warranty & returns policy for this product is the same in all other aspects as the standard HDL warranty and returns policy. Heavy Duty Lighting product group - Strip Lights (i.e. HD18027SMD-CW). If products are installed in exterior, under hood or HDL determined severe locations, this product group carries only a one year product warranty. Strip lights installed in interior locations carry HDL standard 5 year warranty. Other warranty & returns policy for this product is the same in all aspects as the standard HDL warranty and returns policy. RETURNS In the unlikely event of a warranty claim, customers must contact HDL Customer Service Department to obtain a Return Material Authorization (RMA) number. HDL will not honor any warranty claims without proof of purchase and receipt of defective product. In advance of return for any failed product, customers must submit a warranty claim in writing or electronic format, which includes: Date of Failure Detailed Reason for Claim Contact Person Name and Phone Number, Fax Number or Email Address HDL will review the claim and if tentative approval is given a RMA number will be issued. All returning warranty claim packages must have the RMA number clearly marked on the outside of the return package and must be shipped freight prepaid. All products must be returned to the specified HDL facility or designated authorized warranty service center. Submitted products will be analyzed for cause failure, and if approved, a credit will be issued. Short pays or debit deductions are not allowed. Contested claims must be addressed in writing within 30 days of rejection notification. Note: Warranty claims will be approved for credit if it is determined that the cause of the defect was due to manufacturing or component deficiency, and not due to abuse, installation error, mishandling, improper maintenance, worn seals or chemical attack outside the normal working environment. THE FOLLOWING CONDITIONS APPLY TO ALL NON-WARRANTY RETURNS: New product merchandise returns within 30 days from date of invoice require Return Material Authorization (RMA) number from HDL Customer Service Department prior to sending back. Any unopened merchandise accompanied by a RMA, within 30 days, can be returned for full refund or merchandise credit at customer s option. Non-warranty claims outside of 30 days are not guaranteed and will not be accepted without prior authorization from HDL. All unauthorized returns will be refused. All approved merchandise returns, with RMA, are subject to inspection and final approval upon receipt by HDL. Returned merchandise must be in new, resalable condition: unopened, undamaged packaging, including all components, accessories, manuals, and registration cards. Shipping charges are not refundable except for cases of shipping error by HDL. HDL must be notified of all shipping errors within 30 days and reserves the right to choose the method of return shipment at its expense. Merchandise return requests outside of 30 days are not guaranteed and will be considered on an individual basis. If granted, new product returns outside of 30 days may require restocking fees (to be determined). Product returns outside of 30 days will only be allowed account credit and will require an offsetting order. Offsetting order value will be determined at the time RMA is issued. Product returns must be shipped at the owner s expense, freight collect. Discontinued items are not eligible for return or credit. Be Visible. Stay Safe. Table of Contents P 04 P 12 P 20 P 22 P 24 P 28 P 37 P 46 P 48 P 51 P 54 P 56 P 60 P 63 LED PROJECTION DRIVING WORK LIGHTS LED STOP TAIL TURN & PARK TURN LIGHTS LED BACKUP AUXILIARY LIGHTS LED LICENSE UTILITY LIGHTS LED AUXILIARY INTERIOR LIGHTS LED FLUSH MOUNT CLEARANCE MARKER LIGHTS LED SURFACE MOUNT CLEARANCE MARKER LIGHTS LED PEDESTAL MOUNT PARK TURN LIGHTS LED CAB MARKER LIGHTS CONNECTORS & MOUNTING ACCESSORIES LED ELECTRONIC FLASHERS LED REPLACEMENT BULBS DISPLAY & SALES AIDS INDEX
HD46206-3 HIGH OUTPUT RECTANGULAR WORK LIGHT HIGH OUTPUT ROUND WORK LIGHTS 14 LED HD50014-3 HD46206-3WFL HD46206-3SP DIMENSIONS: 5.91 x 3.94 x 2.32 : 12V-1.24A, 24V-0.50A LUMEN: 1350 Super Bright High Power LEDs Stainless Steel Mounting Bracket Powder Coated Pinned Cables 12" Shielded Lead Working Temp: -40 to +50 C Color Temp: 58800-6000KG Moisture & Corrosion Resistant Working Temp: -40 C TO +50 C Color Temp: 5800-6000KG Super Bright High Power LED s Stainless Steel Mounting Bracket 12 Shielded Pinned Cables Powder Coated Cast Aluminum DIMENSIONS: 5.04 x 6.1 x 2.91 : 12V-2.30A, 28V-0.99A LUMEN: 3080 FLOOD LIGHT: HD50014-3WFL SPOT LIGHT: HD50014-3SP HD46208-3 8 LED HIGH OUTPUT RECTANGULAR WORK LIGHT HIGH OUTPUT SQUARE WORK LIGHTS 1 HD46516-3 HD46208-3WFL HD46208-3SP DIMENSIONS: 6.14 x 3.66 x 3.35 : 12V-1.77A, 28V-0.74A LUMEN: 1800 Super Bright High Power LED's 18" Wire Lead from Lamp with Pinned Ends Powder Coated Cast Aluminum Body Working Temp: -40 C TO +50 C Color Temp: 5800-6000KG Super Bright High Power LED s Stainless Steel Mounting Bracket Powder Coated Cast Aluminum 12 Shielded Lead DIMENSIONS: 4.65 x 6.0 x 2.91 : 12V-2.40A, 28V-0.90A LUMEN: 3520 SHOCK: 20g SPOT LIGHT: HD46516-3SP FLOOD LIGHT: HD46516-3WFL HD46308-3 8 LED HIGH OUTPUT RECTANGULAR WORK LIGHT HIGH OUTPUT OVAL WORK LIGHTS 8 LED HD46008-3 HD46308-3WFL HD46308-3SP DIMENSIONS: 6.14 x 3.66 x 3.35 : 12V-1.77A, 28V-0.74A LUMEN: 1800 Super Bright High Power LED's 18" Wire Lead from Lamp with Pinned Ends Powder Coated Cast Aluminum Body Unique Swivel Base Working Temp: -40 C TO +50 C Color Temp: 5800-6000KG Super Bright High Power LED s Stainless Steel Mounting Bracket Powder Coated Cast Aluminum 12 Shielded Lead DIMENSIONS: 5.84 x 3.62 x 2.56 : 12V-1.77A, 28V-0.74A LUMEN: 1800 SPOT LIGHT: HD46008-3SP FLOOD LIGHT: HD46008-3WFL HD46209-3 HIGH OUTPUT RECTANGULAR WORK LIGHT HD46209-3WFL HD46209-3SP DIMENSIONS: 5.91 x 3.94 x 2.32 : 12V-1.77A, 28V-0.74 LUMEN: 2025 Super Bright High Power LED's 18" Wire Lead from Lamp with Pinned Ends Powder Coated Cast Aluminum Body 4 LED PROJECTION DRIVING WORK LIGHTS LED PROJECTION DRIVING WORK LIGHTS 5
Be Visible. Stay Safe. HD52609-3WFL HIGH OUTPUT SQUARE WORK LIGHT HIGH OUTPUT SQUARE MAGNETIC BASE WORK LIGHTS 5 LED HD42505-3WFLMAG FRONT VIEW SIDE VIEW DIMENSIONS: 5.31 x 6.69 x 1.77 : 12V-1.77A, 28V-0.74A LUMEN: 2025 Super Bright High Power LEDs Base Or Side Mounting Options 12 Shielded Cable Powder Coated Cast Aluminium Body Stainless Steel Mounting Bracket Two Mounting Choices Included (Base or Side) Powder Coated Cast Aluminium Body 29 Shielded Lead with either Cigarette Lighter Switch or 4 Wire Trailer Plug Connector DIMENSIONS: 4.33 x 5.75 x 1.61 : 12v-0.90a, 28v-0.40a LUMEN: 1050 FLOOD WITH TRAILER PLUG CONNECTOR: HD42505-3WFLMAGP FLOOD WITH CIGARETTE LIGHTER SWITCH: HD42505-3WFLMAGS HD55009-3WFL HIGH OUTPUT ROUND WORK LIGHTS HIGH OUTPUT ROUND MAGNETIC BASE WORK LIGHTS HD46006-3WFLMAG FRONT VIEW SIDE VIEW DIMENSIONS: 5.5 x 6.61 x 2.05 : 12V-1.77A, 28V-0.74A LUMEN: 2025 Super Bright High Power LEDs Base Or Side Mounting Options 12 Shielded Cable Powder Coated Cast Aluminium Body Stainless Steel Mounting Bracket Two Mounting Choices Included (Base or Side) Powder Coated Cast Aluminium Body 29 Shielded Lead with either Cigarette Lighter Switch or 4 Wire Trailer Plug Connector DIMENSIONS: 4.57 x 5.75 x 1.69 : 12V-1.24A, 24V-0.50A LUMEN: 1350 FLOOD WITH TRAILER PLUG CONNECTOR: HD46006-3WFLMAGP FLOOD WITH CIGARETTE LIGHTER SWITCH: HD46006-3WFLMAGS HD47554WL 54 LED ROUND WORK LIGHT RUBBER HOUSING HIGH OUTPUT SQUARE SLIM LINE WORK LIGHT 5 LED HD42505-3WFL POWERED OFF POWERED ON DIMENSIONS: 5.04 x 6.42 x 3.15 : 12V-0.35A, 28V-0.17A LUMEN: 400 IP RATING: 66 High Impact Rubber Body (Reduces Vibration) Black (-) Ground - Red (+) Power Stainless Mounting Hardware Included Moisture and Corrosion Resistant 12 Shielded Cable 2 Mounting Choices Included (Base or Side) 12 Shielded Pinned Cables Powder Coated Cast Aluminium Body DIMENSIONS: 4.33 x 5.35 x 1.61 : 12v-0.90a, 28v-0.40a LUMEN: 1050 FRONT VIEW SIDE VIEW HD47506WFL HIGH OUTPUT ROUND WORK LIGHT RUBBER HOUSING HIGH OUTPUT ROUND SLIM LINE WORK LIGHT HD46006-3WFL DIMENSIONS: 5.04 x 6.42 x 3.15 : 12V-1.10A, 28V-0.50A LUMEN: 1350 High Impact Rubber Body (Reduces Vibration) Black (-) Ground - Red (+) Power Stainless Mounting Hardware Included Moisture and Corrosion Resistant 12 Shielded Cable 2 Mounting Choices Included (Base or Side) 12 Shielded Pinned Cables Powder Coated Cast Aluminium Body DIMENSIONS: 4.57 x 5.35 x 1.69 : 12V-1.10A, 28V-0.50A LUMEN: 1350 SHOCK: 20g FRONT VIEW SIDE VIEW PROJECTION DRIVING WORK LIGHTS LED PROJECTION DRIVING WORK LIGHTS 7
HD45006-1WFL HIGH OUTPUT ROUND FLOOD LIGHT HIGH OUTPUT SURFACE MOUNT WORK/CLEARANCE LIGHT HD31703-5 1W High Output SMD DIMENSIONS: 4.5 x 2.75 x 5.5 VOLT RANGE: 10 80 VDC : 0.9A LUMEN: 720 Cast Aluminum Body Black Powder Coating Poly Carbonate Lens Mirrored Diode Reflector Stainless Steel Mounting Bracket Reverse Polarity Protection 12 Shielded Cable Super Bright High Power LEDs Flat and Tube Mount Rubber Bases Included 18 Shielded Cable Optional Angle Base Available HD31703-APAD 5W High Output CREE /Blue DIMENSIONS: 3.03 x 1.73 x 0.86 : 12V-0.3A, 24V-0.16A LUMEN: 575 IP RATING: 69 WHITE LED HD31703-5WFL BLUE LED HD31703-5BFL HD45006-1WSP HIGH OUTPUT ROUND SPOT LIGHT HIGH OUTPUT SURFACE MOUNT WORK/CLEARANCE LIGHT HD31703-3 1W High Output SMD DIMENSIONS: 4.5 x 2.75 x 5.5 VOLT RANGE: 10 80 VDC : 0.9A LUMEN: 640 Cast Aluminum Body Black Powder Coating Polycarbonate Lens Mirrored Diode Reflector Stainless Steel Mounting Bracket Reverse Polarity Protection 12 Shielded Cable Super Bright High Power LEDs Flat and Tube Mount Rubber Bases Included 18 Shielded Cable Optional Angle Base Available HD31703-APAD CREE /Green/Amber DIMENSIONS: 3.03 x 1.73 x 0.86 : 12V-0.3A, 24V-0.16A LUMEN: 425 IP RATING: 69 RED LED HD31703-3RFL GREEN LED HD31703-3GFL AMBER LED HD31703-3YFL HD45006-3WFL HIGH OUTPUT ROUND FLOOD LIGHT SLIM RECTANGULAR HIGH POWER WORK FLOOD LAMP HD62006-3W SMD DIMENSIONS: 4.5 x 2.75 x 5.5 VOLT RANGE: 10 80 VDC : 0.17A - 1.13A LUMEN: 1300 Cast Aluminum Body Black Powder Coating Polycarbonate Lens Mirrored Diode Reflector Stainless Steel Mounting Bracket Reverse Polarity Protection 12 Shielded Cable Super Bright High Power LEDs 18" Shielded Lead With Deutsch Connector Powder Coated Cast Aluminum Body Stainless Steel Mounting Hardware Included 1.78 6.29 2.48 1.87 DIMENSIONS: 6.29" x 1.87" x 2.48" VOLT RANGE: 10-30 VDC : 12V-1.4A, 24V-0.7A LUMEN: 1440, 69K HD62006-3WFL HD62006-3WSP HD45006-3WSP HIGH OUTPUT ROUND FLOOD LIGHT FLUSH MOUNT SLIM RECTANGULAR HIGH POWER WORK FLOOD LAMP HD72006-3W SMD DIMENSIONS: 4.5 x 2.75 x 5.5 VOLT RANGE: 10 80 VDC : 0.17A - 1.13A LUMEN: 1200 Cast Aluminum Body Black Powder Coating Polycarbonate Lens Mirrored Diode Reflector Stainless Steel Mounting Bracket Reverse Polarity Protection 12 Shielded Cable Super Bright High Power LEDs 18" Shielded Lead With Deutsch Connector Powder Coated Cast Aluminum Body Optional Angle Base Available HD72006-APAD 7.68 7.93 1.77 0.24 2.44 DIMENSIONS: 7.68" x 2.44" x 1.77" VOLT RANGE: 10-30 VDC : 12V-1.4A, 24V-0.7A LUMEN: 1440, 69K HD72006-3WFLFM HD72006-3WSPFM 8 LED PROJECTION DRIVING WORK LIGHTS LED PROJECTION DRIVING WORK LIGHTS 9
Be Visible. Stay Safe. HD26004-3 4 LED HIGH OUTPUT MINI SQUARE WORK LIGHTS HIGH OUTPUT MINI ROUND WORK LIGHT HD35003-3 FLOOD LIGHT HD26004-3WFL SPOT LIGHT HD26004-3SP DIMENSIONS: 2.6 x 3.66 x 2.6 : 12V-0.74A, 28V-0.33A LUMEN: 900 Super Bright High Power LEDs Stainless Steel Mounting Bracket 12 Shielded Pinned Cables Powder Coated Cast Aluminum Body Powder Coated Cast Aluminum Housing 12" Shielded Cable Stainless Steel Mounting Hardware 90 47 106 DIMENSIONS: 3.54 x 4.17" x 1.85" : 12V-.90A, 28V-0.40A LUMEN: 600 FLOOD LIGHT HD35003-3WFL SPOT LIGHT HD35003-3SP HD35006-3 HIGH OUTPUT MINI SQUARE WORK LIGHT HIGH OUTPUT MINI ROUND WORK LIGHT HD35003-3Y FLOOD LIGHT HD35006-3WFL SPOT LIGHT HD35006-3SP CREE DIMENSIONS: 4.8 x 3.6 x 3.1 VOLT RANGE: 10-30V DC : 12V-1.28A, 24V-0.61A LUMEN: 1150 IP RATING: 68 Super Bright High Power LEDs Stainless Steel Pedestal 12 Shielded Cable with Deutsch Connector Powder Coated Cast Aluminum Body 2 Mounting Choices Included: Flush Mount Front Bezel and Stainless Steel Pedestal Powder Coated Cast Aluminum Housing 12" Shielded Cable Stainless Steel Mounting Hardware 90 47 106 DIMENSIONS: 3.54 x 4.17" x 1.85" : 12V-.90A, 28V-0.40A LUMEN: 460 FLOOD LIGHT HD35003-3YWFL SPOT LIGHT HD35003-3YSP HD32006-3 HIGH OUTPUT MINI FLUSH MOUNT WORK LIGHT HIGH OUTPUT MINI ROUND SPOT LIGHT HD33006-3SP FLOOD LIGHT HD32006-3WFL SPOT LIGHT HD32006-3SP CREE DIMENSIONS: 3.23 x 3.15 x 3.23 : 12V-1.28A, 24V-0.61A LUMEN: 1150 IP RATING: 68 Super Bright High Power LEDs 12 Shielded Cable with Deutsch Connector Powder Coated Cast Aluminum Body Super Bright High Power LEDs 12 Shielded Pinned Cables Powder Coated Cast Aluminum Body DIMENSIONS: 3.31 x 4.45 x 3.84 : 12V-1.24A, 28V-0.50A LUMEN: 1350 FRONT VIEW SIDE VIEW HD32000 SNAP-ON POLYCARBONATE LENS FILTER - DESIGNED TO FIT HD32006 SERIES LIGHTS HIGH OUTPUT DRIVING/FOG LIGHT KIT 4 LED HD42504 HD32000-BF HD32000-AF HD32000-YF Super Bright High Power LEDs Powder Coated Cast Aluminum Body KIT INCLUDES: 2 Lamps with Stainless Steel Mounting Brackets & Hardware Rocker Switch, Wire Harness, and Clips 1W /Amber DIMENSIONS: 4.33 x 1.38 x 1.73 : 300mA LUMEN: 425 HD42504WHP HD42504YHP 10 LED PROJECTION DRIVING WORK LIGHTS LED PROJECTION DRIVING WORK LIGHTS 11
Be Visible. Stay Safe. HD40040R 40 LED 4 ROUND STOP TAIL TURN LIGHT 4" ROUND STOP/TAIL/TURN LIGHT 32 LED HD40032R DIMENSIONS: 4.29 x 1.38 STOP/TURN: 270mA TAIL: 30mA Convex Dot Lens Design for Superior Optics & Light Dispersion Grommet HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS Connectors HD00030,HD00031 Conformally Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL3 Connector HD00030, HD00031, HD40095G, HD40096PC, HD40099SS DIMENSIONS: 4.06 x 2.01" STOP/TURN: 145mA TAIL: 20mA FRONT VIEW BACK VIEW HD40040Y 40 LED 4 ROUND PARK TURN LIGHT 4" ROUND PARK/TURN LIGHT 32 LED HD40032Y DIMENSIONS: 4.29 X 1.38 PARK/TURN: 240mA STOP/TAIL: 20mA Convex Dot Lens Design for Superior Optics & Light Dispersion Grommet HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS Connectors HD00030, #HD00031 Conformally Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL3 Connector HD00030, HD00031, HD40095G, HD40096PC, HD40099SS DIMENSIONS: 4.06 x 2.01" PARK/TURN: 145mA TAIL: 20mA HD40040RC 40 LED 4 ROUND STOP TAIL TURN LIGHT 4" ROUND STOP/TAIL/TURN LIGHT 7 LED HD40007RSD DIMENSIONS: 4.29 x 1.38 STOP/TURN: 270mA TAIL: 30mA Convex Dot Lens Design for Superior Optics & Light Dispersion Grommet HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS Convex Dot Lens Design for Superior Optics & Light Dispersion Standard PL3 Connector Grommet HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS DIMENSIONS: 4.29 x 1.64" STOP/TURN: 150mA TAIL: 15mA HD40040YC 40 LED 4 ROUND PARK TURN LIGHT 4" ROUND PARK/TURN LIGHT 7 LED HD40007YSD DIMENSIONS: 4.29 x 1.38 PARK/TURN: 240mA STOP/TAIL: 20mA Convex Dot Lens Design for Superior Optics & Light Dispersion Grommet HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS Convex Dot Lens Design for Superior Optics & Light Dispersion Standard PL3 Connector Grommet HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS DIMENSIONS: 4.29 x 1.64" PARK/TURN: 140mA TAIL: 14mA 12 LED STOP TAIL TURN & PARK TURN LIGHTS LED STOP TAIL TURN & PARK TURN LIGHTS 13
HD40012RSD 12 LED 4 ROUND STOP TAIL TURN LIGHT 6 OVAL STOP TAIL TURN LIGHT 10 LED HD60010RSD DIMENSIONS: 4.29 x 1.64 STOP/TURN: 140mA TAIL: 11mA Convex Dot Lens Design for Superior Optics & Light Dispersion Grommet HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS Convex Dot Lens Design for Superior Optics & Light Dispersion Standard PL3 Connector Grommet HD60095G Chrome Grommet Cover HD60096PC, HD60097PC DIMENSIONS: 6.5 x 2.3 x 1.57 STOP/TURN: 100mA TAIL: 10mA HD40012YSD 12 LED 4 ROUND PARK TURN LIGHT 6 OVAL PARK TURN LIGHT 10 LED HD60010YSD DIMENSIONS: 4.29 x 1.64 PARK/TURN: 129mA STOP/TAIL: 19mA Convex Dot Lens Design for Superior Optics & Light Dispersion Grommet #HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS Convex Dot Lens Design for Superior Optics & Light Dispersion Standard PL3 Connector Grommet HD60095G CHROME Grommet HD60096PC, HD60097PC DIMENSIONS: 6.5 x 2.3 x 1.57 PARK/TURN: 175mA TAIL: 17mA HD40012RCSDM 12 LED 4 ROUND STOP TAIL TURN LIGHT 6 OVAL STOP TAIL TURN LIGHT 1 HD60013RCSDM DIMENSIONS: 4.29 x 2.09 STOP/TURN: 140mA TAIL: 11mA Convex Dot Lens Design for Superior Optics & Light Dispersion Grommet HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS Convex Dot Lens Design with Mirror Reflector Standard PL3 Connector Grommet HD60095G Chrome Grommet Cover HD60096PC, HD60097PC DIMENSIONS: 6.5 x 2.28 x 2.2 STOP/TURN: 200mA TAIL: 20mA HD40012YCSDM 12 LED 4 ROUND PARK TURN LIGHT 6 OVAL PARK TURN LIGHT 27 LED HD60027YCSDM DIMENSIONS: 4.29 x 2.09 PARK/TURN: 129mA STOP/TAIL: 19mA Convex Dot Lens Design for Superior Optics & Light Dispersion Grommet HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS Convex Dot Lens Design with Mirror Reflector Standard PL3 Connector Grommet HD60095G Chrome Grommet Cover HD60096PC, HD60097PC DIMENSIONS: 6.5 x 2.28 x 2.2 PARK/TURN: 320mA TAIL: 20mA 14 LED STOP TAIL TURN & PARK TURN LIGHTS LED STOP TAIL TURN & PARK TURN LIGHTS 15
Be Visible. Stay Safe. HD60060R 60 LED 6 OVAL STOP TAIL TURN LIGHT 6 OVAL STOP TAIL TURN LIGHT 42 LED HD60042R DIMENSIONS: 6.5 x 2.28 x 1.73 STOP/TURN: 720mA TAIL: 40mA Standard PL3 Connector Grommet HD60095G Chrome Grommet Cover HD60096PC, HD60097PC Conformally Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL3 Connector Grommet HD60095G Chrome Grommet Cover HD60096PC, HD60097PC DIMENSIONS: 6.16" x 1.99" x 1.35" STOP/TURN: 220mA TAIL: 30mA HD60060Y 60 LED 6 OVAL PARK TURN LIGHT 6 OVAL PARK TURN LIGHT 42 LED HD60042Y DIMENSIONS: 6.5 x 2.28 x 1.73 PARK/TURN: 620mA TAIL: 20mA Standard PL3 Connector Grommet HD60095G Chrome Grommet Cover HD60096PC, HD60097PC Conformally Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL3 Connector Grommet HD60095G Chrome Grommet Cover HD60096PC, HD60097PC DIMENSIONS: 6.16" x 1.99" x 1.35" PARK/TURN: 220mA TAIL: 30mA HD60015RSD 15 LED 6 OVAL STOP TAIL TURN LIGHT 5 RECTANGULAR STOP TAIL TURN LIGHT 60 LED HD50060R DIMENSIONS: 6.5 x 2.3 x 1.57 STOP/TURN: 200mA TAIL: 10mA Convex Dot Lens Design for Superior Optics & Light Dispersion Standard PL3 Connector Grommet HD60095G Chrome Grommet Cover HD60096PC Standard PL3 Connector Grommet HD50095G Connectors HD00030,HD00031 DIMENSIONS: 5.28 x 3.43 x 1.97 STOP/TURN: 550mA TAIL: 60mA HD60021YSD 21 LED 6 OVAL PARK TURN LIGHT 5 RECTANGULAR PARK TURN LIGHT 60 LED HD50060Y DIMENSIONS: 6.5 x 2.3 x 1.57 PARK/TURN: 186mA TAIL: 20mA Convex Dot Lens Design for Superior Optics & Light Dispersion Standard PL3 Connector Grommet HD60095G Chrome Grommet Cover HD60096PC Standard PL3 Connector Grommet HD50095G DIMENSIONS: 5.28 x 3.43 x 1.97 STOP/TURN: 530mA TAIL: 50mA 1 STOP TAIL TURN & PARK TURN LIGHTS LED STOP TAIL TURN & PARK TURN LIGHTS 17
HD57033RSDM 3 UNIVERSAL SQUARE COMBINATION BOX LIGHT 17" SLIM OVAL RED W/ STOP/TAIL/TURN LIGHT 11 LED HD17011R /White DIMENSIONS: 5.75 x 6.8 x 2.67 VOLT RANGE: 7.5-14 VDC STOP/TURN: 330mA TAIL: 140mA 12 STT LEDs 21 Backup LEDs Red and Clear Polycarbonate Lens ABS Housing Mirror Reflective Diode Surround 4-Wire/Blunt Cut Wires 3 Mounting Studs Convex Dot Lens Conformally Coated Electronics Pre-Wired / No Connector Required DIMENSIONS: 16.94 x 1.37 x 1.06 STOP/TURN: 250mA TAIL: 15mA HD17011RSD HD17011RCSD HD57039RSDM 3 UNIVERSAL SQUARE COMBINATION BOX LIGHT 6 OVAL MID PARK TURN 18 LED HD60018YSD /White DIMENSIONS: 5.75 x 6.8 x 2.67 VOLT RANGE: 7.5-14 VDC STOP/TURN: 330mA TAIL: 140mA LICENSE: 170mA 12 STT LEDs 21 Backup LEDs 6 License LEDs Red and Clear Polycarbonate Lens ABS Housing Mirror Reflective Diode Surround 4-Wire/Blunt Cut Wires 3 Mounting Studs Reflectorized Amber Lens Grommet HD60095G Chrome Grommet Cover HD60096PC DIMENSIONS: 6.5 x 2.38 x 2.75 PARK/TURN: 180mA MARKER: 20mA HD83019TR 1 RECTANGULAR COMBINATION RIGHT TRAILER LIGHT PETERBILT PARK TURN MARKER ASSEMBLY 31 LED HD65031YSD DIMENSIONS: 8.66 x 3.15 x 2.25 STOP/TURN: 360mA TAIL: 40mA 13 STT LEDs 6 Side Marker LEDs Pre-wired No Connector Required Mounting Hardware Included 21 Forward Facing LEDs 4 Traffic Facing LEDs 6 Rear Facing LEDs Polycarbonate Lens and Chromed ABS Housing Sealed for Moisture Protection 3-Wire W/Bullet Terminals Factory Color-coded Wires COLOR: Amber DIMENSIONS: 6.59 x 3.12 x 5.12 VOLT RANGE: 9.5-14 VDC PARK/TURN: 0.25A MARKER: 0.10A HD83031TR 31 LED RECTANGULAR COMBINATION LEFT TRAILER LIGHT PETERBILT PARK TURN MARKER ASSEMBLY 31 LED HD65031YCSD /White DIMENSIONS: 8.66 x 3.15 x 2.25 STOP/TURN: 360mA TAIL: 40mA LICENSE: 240mA 13 STT LEDs 6 Side Marker LEDs 12 SUPER DUTY License LEDs Pre-wired, No Connector Required Mounting Hardware Included 21 Forward Facing LEDs 4 Traffic Facing LEDs 6 Rear Facing LEDs Polycarbonate Lens and Chromed ABS Housing Sealed for Moisture Protection 3-Wire W/Bullet Terminals Factory Color-coded Wires COLOR: Amber DIMENSIONS: 6.59 x 3.12 x 5.12 VOLT RANGE: 9.5-14 VDC PARK/TURN: 0.25A MARKER: 0.10A 18 LED STOP TAIL TURN & PARK TURN LIGHTS LED STOP TAIL TURN & PARK TURN LIGHTS 19
HD40007WSD 7 LED 4 ROUND BACK UP LIGHT 6 OVAL BACKUP LIGHT 10 LED HD60010WSD DIMENSIONS: 4.29 x 1.64 : 280mA Convex Dot Lens Design for Superior Optics and Light Dispersion Standard PL3 Connector Grommet HD40095G Grommet HD60095G Chrome Grommet Cover HD60096PC DIMENSIONS: 6.5 x 2.3 x 1.57 : 220mA Chrome Grommet Cover HD40096PC Security Flange HD40099SS SHOWN WITH OPTIONAL GROMMET HD40012WSD 12 LED 4 ROUND BACK UP LIGHT 6 OVAL BACKUP LIGHT 27 LED HD60027WSD DIMENSIONS: 4.29 x 2.09 : 330mA Convex Dot Lens Design for Superior Optics and Light Dispersion Standard PL3 Connector Grommet HD40095G Grommet #HD60095G Chrome Grommet Cover HD60096PC Connectors #HD00030, HD00031 DIMENSIONS: 6.5 x 2.28 x 2.2 : 360mA Chrome Grommet Cover HD40096PC Security Flange HD40099SS SHOWN WITH OPTIONAL GROMMET HD40040W 40 LED 4 ROUND BACK UP LIGHT 6 OVAL UTILITY LIGHT 4 LED HD60804WCSD DIMENSIONS: 4.24 x 1.87 : 280mA Standard PL3 Connector Grommet HD40095G Chrome Grommet Cover HD40096PC Universal Design for Use as Auxiliary Or Utility Light Requires Standard PL2 Connector DIMENSIONS: 6.63 X 2.13 X 0.7 VOLT RANGE: 9.9-13.8 VDC : 50mA Security Flange HD40099SS Grommet HD25095G Or HD25195G Bezel HD25096PC Connectors HD00020 Or HD00021 HD40056W 5 4 ROUND BACK UP LIGHT 2.5 FLUSH MOUNT UTILITY LIGHT HD25003WSD DIMENSIONS: 4.29 x 2.09 : 330mA Standard PL3 Connector Grommet HD40095G Chrome Grommet Cover HD40096PC Security Flange HD40099SS Universal Design for Use as Auxiliary Or Utility Light Requires Standard PL2 Connector Grommet HD25095G Or HD25195G Bezel HD25096PC DIMENSIONS: 2.52 X 0.71 VOLT RANGE: 9.9-13.8 VDC : 68mA Connectors HD00020 Or HD00021 20 LED BACK UP AUXILIARY LIGHTS LED BACK UP AUXILIARY LIGHTS 21
HD25103WSD 2.5 RECTANGULAR UTILITY LIGHT ABS LICENSE LIGHT 12 LED HD40212BL DIMENSIONS: 2.52 x 1.22 x 0.83 VOLT RANGE: 7.5-14 VDC : 45mA Chrome Mounting Base HD25000PC Pre-wired, No Connector Required DIMENSIONS: 4.1 x 1.89 x 2.13 VOLT RANGE: 7.5-14 VDC : 160mA * BASE NOT INCLUDED HD25108W 8 LED 2.5" RECTANGULAR UTILITY LIGHT ABS LICENSE LIGHT 12 LED HD40212PC DIMENSIONS: 2.52 x 1.22 x 0.83 VOLT RANGE: 7.5-14 VDC : 60mA Chrome Mounting Base HD25109PC Black Mounting Base HD25109BP Pre-wired, No Connector Required DIMENSIONS: 4.1 x 1.89 x 2.13 VOLT RANGE: 7.5-14 VDC : 160mA * BASE NOT INCLUDED HD40112W 12 LED 4" RECTANGULAR UTILITY LIGHT ABS LICENSE LIGHT 4 LED HD30004BL DIMENSIONS: 3.74 x 1.22 x 0.83 : 190mA Chrome Mounting Base HD40113PC Black Mounting Base HD40113BL Pre-wired, No Connector Required DIMENSIONS: 3.0 x 1.18 x 1.65 VOLT RANGE: 10-30 VDC : 50mA HD63018SMDW 18 LED TRAILER/RV ANGLED PORCH LIGHT MINI OVAL FLUSH MOUNT UTILITY LIGHT 2 LED HD21002SMDWC BLACK BODY HD63018SMDW-B WHITE BODY HD63018SMDW-W 5050 SMD DIMENSIONS: 5.96 x 3.44 x 1.96 : 360mA LUMEN: 300 IP RATING: 64 Removable Clear Opaque Lens Plastic Body / Downward Angle Hidden Mounting Holes Beneath Removable Light Lens Designed to Match Incandescent OEM Fixtures for Easy Replacement Sealed Circuit Board for Excellent Moisture Resistance Available with Black or White Body Universal Design for Use as Auxiliary or Utility Light Compact Size for Easy installation Flush Mount 3/4 Hole with Included Grommet Meets P2 and PC DOT FMVSS 108/ SAE Requirements Hard Wired (2 Wire) with Bullet Terminal Connectors Super Bright 2 SMD 5050 SMD DIMENSIONS: 1.95 x 1.1 x 0.5 : 20mA 22 LED LICENSE/UTILITY LIGHTS LED LICENSE/UTILITY LIGHTS 23
HD34003WCSMD MINI ROUND FLUSH MOUNT UTILITY LIGHT 7 LOW PROFILE INTERIOR LIGHT 42 LED HD57007WSD 3528 SMD DIMENSIONS: 1.95 X 1.1 X 0.5 : 20mA Universal Design for Use as Auxiliary or Utility Light Compact Size for Easy installation Flush Mount 3/4 Hole with Included Grommet Meets P2 and PC DOT FMVSS 108/ SAE Requirements Hard Wired (2 Wire) with Bullet Terminal Connectors Super Bright 3 SMD Equipped with ON/OFF Switch MS Frosted Lens Aluminum ABS Body Sealed Moisture Resistant Electronics Low Profile KIT INCLUDES Mounting Screws, 36 20 AWG Blunt Cut Wire DIMENSIONS: 7.01 x 5.71 x 0.47 : 12V-0.43A, 24v-0.21A LUMEN: 230 HD34103WCSMD MINI ROUND FLUSH MOUNT UTILITY LIGHT 11 LOW PROFILE INTERIOR LIGHT 72 LED HD57011WSD FRONT VIEW SIDE VIEW 2835 DIMENSIONS: 1.09" x.7" : 20mA Super Bright 3 SMD Universal Design for Use as Auxiliary or ID Light Compact Size for Easy Installation Flush Mount 3/4" Hole with Included Grommet Grommet Design Includes "Built in Visor" 6" Sleeved Wires with Bullet Terminals Equipped with ON/OFF Switch MS Frosted Lens Aluminum ABS Body Sealed Moisture Resistant Electronics Low Profile KIT INCLUDES Mounting Screws, 36 20 AWG Blunt Cut Wire DIMENSIONS: 10.47 x 5.71 x 0.47 : 12V-0.70A, 24v-0.34A LUMEN: 400 SAE P2 PC DOT HD35015WSD 108 LED 15" LOW PROFILE INTERIOR LIGHT 15 LOW PROFILE INTERIOR LIGHT 108 LED HD57015WSD DIMENSIONS: 15 x 3.54 x 0.47 : 12V-0.84A, 24v-040A LUMEN: 570 Equipped with On/Off Switch MS Frosted Lens Aluminum/ABS Body Sealed Moisture Resistant Electronics Low Profile Surface Mount Hardware Included Equipped with ON/OFF Switch MS Frosted Lens Aluminum ABS Body Sealed Moisture Resistant Electronics Low Profile KIT INCLUDES Mounting Screws, 36 20 AWG Blunt Cut Wire DIMENSIONS: 15 x 5.71 x 0.47 : 12V-0.84A, 24v-0.40A LUMEN: 570 HD35018WSD 138 LED 18" LOW PROFILE INTERIOR LIGHT 18 LOW PROFILE INTERIOR LIGHT 138 LED HD57018WSD DIMENSIONS: 18 x 3.54 x 0.47 : 12V-0.84A, 24v-040A LUMEN: 730 Equipped with On/Off Switch MS Frosted Lens Aluminum/ABS Body Sealed Moisture Resistant Electronics Low Profile Surface Mount Hardware Included Equipped with ON/OFF Switch MS Frosted Lens Aluminum ABS Body Sealed Moisture Resistant Electronics Low Profile KIT INCLUDES Mounting Screws, 36 20 AWG Blunt Cut Wire DIMENSIONS: 18 x 5.71 x 0.47 : 12V-0.84A, 24v-0.40A LUMEN: 730 24 LED AUXILIARY INTERIOR LIGHTS LED AUXILIARY INTERIOR LIGHTS 25
Be Visible. Stay Safe. HD70009WSD 7 EASY CONNECT AUXILIARY LIGHT 7 EZ CONNECT AUXILIARY LIGHT HD70009GSD DIMENSIONS: 7.23 x 0.98 x 0.81 Epoxy Potted Circuitry Moisture and Corrosion Resistant Surface Mount with 2 Screws Hardware Included Anti-vibration Gasket Included Epoxy Potted Circuitry Moisture & Corrosion Resistant Surface Mount with 2 Screws Hardware Included Anti-vibration Gasket Included COLOR: Green DIMENSIONS: 7.23 x 0.98 x 0.81 : 60mA Hardwired (2 Wire) 6 Length Ez-connect Snap-together with Additional Ez Connect Lights Hardwired (2 Wire) 6 Length Ez-connect Snap-together with Additional Ez Connect Lights : 60mA * EZ CONNECT TOGETHER FOR ANY NEEDED LENGTH * EZ CONNECT TOGETHER FOR ANY NEEDED LENGTH HD70009RSD 7 EASY CONNECT AUXILIARY LIGHT 23 INTERIOR LIGHT 12 LED HD23012SMD-CW DIMENSIONS: 7.23 x 0.98 x 0.81 Epoxy Potted Circuitry Moisture & Corrosion Resistant Surface Mount with 2 Screws Hardware Included Anti-vibration Gasket Included Equipped with ON/OFF Switch Clear Acrylic Lens Reflective Diode Surround Aluminum Body Sealed Moisture Resistant 5050 SMD COLOR: Cool White DIMENSIONS: 23.23 x 1.57 x 0.79 : 60mA Hardwired (2 Wire) 6 Length Ez-connect Snap-together with Additional Ez Connect Lights KIT INCLUDES Mounting Screws, 36 20 AWG Blunt Cut Wire : 12V-0.77A, 24V-0.40A * EZ CONNECT TOGETHER FOR ANY NEEDED LENGTH HD70009YSD 7 EASY CONNECT AUXILIARY LIGHT 23 INTERIOR LIGHT 24 LED HD23024SMD-CW DIMENSIONS: 7.23 x 0.98 x 0.81 : 60mA Epoxy Potted Circuitry Moisture & Corrosion Resistant Surface Mount with 2 Screws Hardware Included Anti-vibration Gasket Included Hardwired (2 Wire) 6 Length Ez-connect Snap-together with Additional Ez Connect Lights Equipped with ON/OFF Switch Clear Acrylic Lens Reflective Diode Surround Aluminum Body Sealed Moisture Resistant KIT INCLUDES Mounting Screws, 36 20 AWG Blunt Cut Wire 5050 SMD COLOR: Cool White DIMENSIONS: 23.23 x 1.57 x.79 : 12V-0.77A, 24V-0.37A * EZ CONNECT TOGETHER FOR ANY NEEDED LENGTH HD70009BSD 7 EASY CONNECT AUXILIARY LIGHT 12 VOLT FLEXIBLE STRIP LIGHTING 18-90 LED COOL WHITE SMD COLOR: Blue DIMENSIONS: 7.23 x 0.98 x 0.81 : 60mA * EZ CONNECT TOGETHER FOR ANY NEEDED LENGTH Epoxy Potted Circuitry Moisture & Corrosion Resistant Surface Mount with 2 Screws Hardware Included Anti-vibration Gasket Included Hardwired (2 Wire) 6 Length Ez-connect Snap-together with Additional Ez Connect Lights 3M 4229 Superior Bonding Tape Available in Six Lengths Adheres to a Variety of Surfaces Moisture Proof Electronics Packaged on Protective Reel Shipped in Anti-static Bag Mounting Clamps and Screws Included 10 Shielded Power Cable Equipped with Deutsch Connector DT04-2P PART: LENGTH: : LUMENS: HD12018CW-DC 12 18 310mA 134/305 HD18027CW-DC 18 27 450mA 150/480 HD24036CW-DC 24 36 550mA 171/640 HD36054CW-DC 36 54 750mA 192/870 HD48072CW-DC 48 72 920mA 209/990 HD60090CW-DC 60 90 1440mA 243/1230 2 AUXILIARY INTERIOR LIGHTS LED AUXILIARY INTERIOR LIGHTS 27
HD34103RSMD MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT HD34003R 2835 SMD DIMENSIONS: 1.09 x 0.7 : 20mA Super Bright 3 SMD Universal Design for Use as Auxiliary/ Utility Marker or ID Light Compact Size for Easy Installation Flush Mount 3/4" Hole with Included Grommet Grommet Design Includes "Built in Visor" 6" Sleeved Wires with Bullet Terminals Super Bright 3 SMD Universal Design for Use as Auxiliary/ Utility Marker or ID Light Compact Size for Easy installation Flush Mount 3/4 Hole with Included Grommet Hard Wired with Bullet Terminal Connectors 3528 SMD DIMENSIONS: 1.09 x 0.5 : 20mA HD34003RSMD HD34003RCSMD SAE P2 PC DOT HD34103RCSMD MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT HD34003Y FRONT VIEW SIDE VIEW 2835 SMD DIMENSIONS: 1.09 x 0.7 : 20mA Super Bright 3 SMD Universal Design for Use as Auxiliary/ Utility Marker or ID Light Compact Size for Easy Installation Flush Mount 3/4" Hole with Included Grommet Grommet Design Includes "Built in Visor" 6" Sleeved Wires with Bullet Terminals Super Bright 3 SMD Universal Design for Use as Auxiliary/ Utility Marker or ID Light Compact Size for Easy installation Flush Mount 3/4 Hole with Included Grommet Hard Wired with Bullet Terminal Connectors 3528 SMD DIMENSIONS: 1.09 x 0.5 : 20mA HD34003YSMD HD34003YCSMD SAE P2 PC DOT HD34103YMD MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT MINI ROUND 3-WIRE CLEARANCE MARKER LIGHT HD34003-3R 2835 SMD DIMENSIONS: 1.09 x 0.7 : 20mA Super Bright 3 SMD Universal Design for Use as Auxiliary/ Utility Marker or ID Light Compact Size for Easy Installation Flush Mount 3/4" Hole with Included Grommet Grommet Design Includes "Built in Visor" 6" Sleeved Wires with Bullet Terminals Super Bright 3 SMD Universal Design for Use as Auxiliary/ Utility Marker or ID Light Compact Size for Easy installation Flush Mount 3/4 Hole with Included Grommet Hard Wired with Bullet Terminal Connectors 3528 CREE SMD DIMENSIONS: 1.09 x 0.5 : 20mA HD34003-3RSMD HD34003-3RCSMD SAE P2 PC DOT HD34103YCSMD MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT MINI ROUND 3-WIRE CLEARANCE MARKER LIGHT HD34003-3Y 2835 SMD DIMENSIONS: 1.09 x 0.7 : 20mA Super Bright 3 SMD Universal Design for Use as Auxiliary/ Utility Marker or ID Light Compact Size for Easy Installation Flush Mount 3/4" Hole with Included Grommet Grommet Design Includes "Built in Visor" 6" Sleeved Wires with Bullet Terminals SAE P2 PC DOT Super Bright 3 SMD Universal Design for Use as Auxiliary/ Utility Marker or ID Light Compact Size for Easy installation Flush Mount 3/4 Hole with Included Grommet Hard Wired with Bullet Terminal Connectors 3528 CREE SMD DIMENSIONS: 1.09 x 0.5 : 20mA HD34003-3YSMD HD34003-3YCSMD 28 LED FLUSH MOUNT CLEARANCE LIGHT LED FLUSH MOUNT CLEARANCE MARKER LIGHTS 29
Be Visible. Stay Safe. HD34003BCSMD MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT 2 ROUND CLEARANCE MARKER LIGHT HD20003R 3528 SMD COLOR: Blue DIMENSIONS: 1.09 x 0.5 : 20mA Super Bright 2 SMD Universal Design for Use as auxiliary/ Utility Marker or ID Light Compact Size for Easy installation Flush Mount 3/4 Hole with Included Grommet Hard Wired with Bullet Terminal Connectors Marker, Side Marker or ID Light PC Lens and Housing Requires Industry Standard PL2 Connector Grommet HD20095G Chrome Bezel HD20096PC DIMENSIONS: 2.02 x 0.69 68mA HD20003RSD HD20003RCSD Connectors HD00020, HD00021 HD21002SMDBC 2 LED MINI OVAL CLEARANCE MARKER LIGHT 2 ROUND CLEARANCE MARKER LIGHT HD20003Y 5050 SMD COLOR: Blue DIMENSIONS: 1.95 x 1.1 x 0.5 VOLT RANGE: 7.7-14 VDC : 20mA Super Bright 2 SMD Universal Design for Use as auxiliary/ Utility Marker or ID Light Compact Size for Easy installation Flush Mount 3/4 Hole with Included Grommet Hard Wired with Bullet Terminal Connectors Marker, Side Marker or ID Light PC Lens and Housing Requires Industry Standard PL2 Connector Grommet HD20095G DIMENSIONS: 2.02 x 0.69 68mA HD20003YSD HD20003YCSD Chrome Bezel HD20096PC Connectors HD00020, HD00021 HD21002SMDR 2 LED MINI OVAL CLEARANCE MARKER LIGHT 2" ROUND RED CLEARANCE MARKER LIGHT HD20009R HD21002SMDR HD21002SMDRC 5050 SMD DIMENSIONS: 1.95 x 1.1 x 0.5 VOLT RANGE: 7.7-13.8 VDC : 20mA Super Bright 2 SMD Universal Design for Use as auxiliary/ Utility Marker or ID Light Compact Size for Easy installation Flush Mount 3/4 Hole with Included Grommet Hard Wired with Bullet Terminal Connectors Marker or ID Light Conformally Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive Grommet HD20095G Chrome Bezel HD20096PC Connectors HD00020, HD00021 DIMENSIONS: 1.82 x.88" 60mA HD21002SMDY 2 LED MINI OVAL CLEARANCE MARKER LIGHT 2" ROUND AMBER CLEARANCE MARKER LIGHT HD20009Y HD21002SMDY HD21002SMDYC 5050 SMD DIMENSIONS: 1.95 x 1.1 x 0.5 VOLT RANGE: 7.7-13.8 VDC : 20mA Super Bright 2 SMD Universal Design for Use as auxiliary/ Utility Marker or ID Light Compact Size for Easy installation Flush Mount 3/4 Hole with Included Grommet Hard Wired with Bullet Terminal Connectors Marker or ID Light Conformally Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive Grommet HD20095G Chrome Bezel HD20096PC DIMENSIONS: 2.05 x 0.71 60mA Connectors HD00020, HD00021 30 LED FLUSH MOUNT CLEARANCE MARKER LIGHTS LED FLUSH MOUNT CLEARANCE MARKER LIGHTS 31
HD20010R 10 LED 2 ROUND CLEARANCE MARKER LIGHT 2.5" ROUND CLEARANCE MARKER LIGHT 12 LED HD25012R HD20010R HD20010RC DIMENSIONS: 2.05 x 0.71 : 100mA Marker, Side Marker or ID Light PC Lens and Housing Requires Industry Standard PL2 Connector Industry Grommet HD20095G Chrome Bezel D20096PC Connectors HD00020, HD00021 Marker or ID Light Conformally Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive Grommet HD60095G Chrome Grommet Cover HD60096PC DIMENSIONS: 2.52 x 0.71 60mA Connectors HD00020, HD00021 HD20010Y 10 LED 2 ROUND CLEARANCE MARKER LIGHT 2.5" ROUND CLEARANCE MARKER LIGHT 12 LED HD25012Y HD20010Y HD20010YC DIMENSIONS: 2.05 x 0.71 : 120mA Marker, Side Marker or ID Light PC Lens and Housing Requires Industry Standard PL2 Connector Industry Grommet HD20095G Chrome Bezel HD20096PC Connectors HD00020, HD00021 Marker or ID Light Conformally Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive Grommet HD60095G Chrome Grommet Cover HD60096PC DIMENSIONS: 2.52 x 0.71 60mA Connectors HD00020, HD00021 HD25003R 2.5 ROUND CLEARANCE MARKER LIGHT 2.5 ROUND CLEARANCE MARKER LIGHT 1 HD25013R HD25003RSD HD25003RCSD DIMENSIONS: 2.52 x 0.71 : 68mA Marker, Side Marker or ID Light PC Lens and Housing Requires Industry Standard PL2 Connector Chrome Bezel HD25096PC Connectors HD00020, HD00021 Marker, Side Marker or ID Light PC Lens and Housing Requires Industry Standard PL2 Connector Industry Grommet HD25095G or HD25195G Chrome Bezel HD25096PC Connectors HD00020, HD00021 DIMENSIONS: 2.52 x 0.71 125mA HD25013R HD25013RC HD25003Y 2.5 ROUND CLEARANCE MARKER LIGHT 2.5 ROUND CLEARANCE MARKER LIGHT 1 HD25013Y HD25003YSD HD25003YCSD DIMENSIONS: 2.52 x 0.71 : 68mA Marker, Side Marker or ID Light PC Lens and Housing Requires Industry Standard PL2 Connector Chrome Bezel HD25096PC Connectors HD00020, HD00021 Marker, Side Marker or ID Light PC Lens and Housing Requires Industry Standard PL2 Connector Industry Grommet HD25095G or HD25195G Chrome Bezel HD25096PC Connectors HD00020, HD00021 DIMENSIONS: 2.52 x 0.71 125mA HD25013Y HD25013YC 32 LED FLUSH MOUNT CLEARANCE MARKER LIGHTS LED FLUSH MOUNT CLEARANCE MARKER LIGHTS 33
Be Visible. Stay Safe. HD20309R 2 BEEHIVE CLEARANCE MARKER LIGHTS 2.5 BEEHIVE CLEARANCE MARKER LIGHTS 12 LED HD25312R DIMENSIONS: 2.05 x 1.81 : 60mA Marker or ID Light Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive Marker or ID Light Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive SMD DIMENSIONS: 2.52 x 2.48 : 60mA HD20309Y 2 BEEHIVE CLEARANCE MARKER LIGHTS 2.5 BEEHIVE CLEARANCE MARKER LIGHT 12 LED HD25312Y DIMENSIONS: 2.05 x 1.81 : 60mA Marker or ID Light Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive Marker or ID Light Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive SMD DIMENSIONS: 2.52 x 2.48 : 60mA HD20310R 10 LED 2 BEEHIVE CLEARANCE MARKER LIGHTS 2.5 BEEHIVE CLEARANCE MARKER LIGHT 1 HD25313R DIMENSIONS: 2.05 x 1.81 : 100mA Marker or ID Light Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive Marker or ID Light Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive DIMENSIONS: 2.52 x 2.48 : 120mA HD20310R HD20310RC Grommet HD25095G or HD25195G Chrome Bezel HD25096PC Connector HD00020, HD00021 Grommet HD25095G or HD25195G Chrome Bezel HD25096PC Connector HD00020, HD00021 HD25313R HD25313RC HD20310Y 10 LED 2 BEEHIVE CLEARANCE MARKER LIGHTS 2.5" BEEHIVE CLEARANCE MARKER LIGHT 1 HD25313Y DIMENSIONS: 2.05 x 1.81 : 100mA Marker or ID Light Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive Marker or ID Light Coated Electronics Ultrasonically Welded Lens to Body Uses Industry Standard PL2 Connector Non Polarity Sensitive DIMENSIONS: 2.52 x 2.48 : 120mA HD20310Y HD20310YC Grommet HD25095G or HD25195G Chrome Bezel HD25096PC Connector HD00020, HD00021 Grommet HD25095G or HD25195G Chrome Bezel HD25096PC Connector HD00020, HD00021 HD25313Y HD25313YC 34 LED FLUSH MOUNT CLEARANCE MARKER LIGHTS LED FLUSH MOUNT CLEARANCE MARKER LIGHTS 35
HD25113R 1 2.5 FLUSH MOUNT REFLEX LENS CLEARANCE MARKER LIGHT 4 DOUBLE BULL S EYE CLEARANCE MARKER LIGHT 10 LED HD40810R DIMENSIONS: 2.52 x 0.71 : 120mA Marker, Side Marker or ID Light Standard PL2 Connector Grommet HD25095G or HD25295G Surface Mount, Screws not Included Mounting Holes 3 on Center Pre-wired and Ready for install Chrome Metal Guard HD40811C DIMENSIONS: 4.02 x 2.0 x 1.14 VOLT RANGE: 7.5-14 VDC : 110mA HD40810R Connectors HD00020, HD00021 Chrome Bezel HD25096PC HD40810RC HD25113Y 1 2.5 FLUSH MOUNT REFLEX LENS CLEARANCE MARKER LIGHT 4 DOUBLE BULL S EYE CLEARANCE MARKER LIGHT 10 LED HD40810Y DIMENSIONS: 2.52 x 0.71 : 125mA Reflectorized Acrylic Lens Fits all Standard Mounting Polycarbonate Housing DOT/SAE J592E, JF94F Grommet HD25095G Surface Mount, Screws not Included Mounting Holes 3 on Center Pre-wired and Ready for install Chrome Metal Guard HD40811C DIMENSIONS: 4.02 x 2.0 x 1.14 : 110mA HD40810Y Connectors HD00020, HD00021 HD40810YC HD20007SMD 7 LED 2 SURFACE MOUNT CLEARANCE MARKER LIGHT 4" DOUBLE BULLS EYE CLEARANCE MARKER 10 LED HD40810R HD20007SMDY HD20007SMDR 3528 SMD /Amber DIMENSIONS: 2.95 x 0.72 : 40mA Universal Design Polycarbonate Lens and ABS Housing Sealed for Moisture Protection Snap Style Chrome Bezel Hides Screws (Included) 2 Wires with Bullet Terminals DOT/P2, PC rker or ID Light Conformally Coated Electronics Surface Mount Screws Included Mounting Hole Center to Center: 3" Pre-wired and Ready for Install SMD DIMENSIONS: 4.02" x 2.0" x 1.02" : 70mA HD40810RCSMD HD40810RSMD Chrome Metal Guard HD40811C HD25009SMD 2.5 SURFACE MOUNT CLEARANCE 4" DOUBLE BULLS EYE CLEARANCE MARKER 10 LED HD40810Y HD25009SMDY HD250009SMDR 3528 SMD /Amber DIMENSIONS: 3.53 x 0.74 : 60mA Universal Design Polycarbonate Lens and ABS Housing Sealed for Moisture Protection Snap Style Chrome Bezel Hides Screws (Included) 2 Wires with Bullet Terminals DOT/P2, PC Marker or ID Light Conformally Coated Electronics Surface Mount Screws Included Mounting Hole Center to Center: 3" Pre-wired and Ready for Install Chrome Metal Guard HD40811C SMD DIMENSIONS: 4.02" x 2.0" x 1.02" : 70mA HD40810YCSMD HD40810YSMD 3 FLUSH MOUNT CLEARANCE MARKER LIGHTS LED SURFACE MOUNT CLEARANCE MARKER LIGHTS 37
Be Visible. Stay Safe. HD26002R 2 LED 2.5 OVAL CLEARANCE MARKER LIGHT 2.5 RECTANGULAR CLEARANCE MARKER LIGHT 8 LED HD25108R HD26002RCSD HD26002RSD DIMENSIONS: 2.6 x 1.1 x 0.69 : 30mA Marker, Side Marker or ID Light Polycarbonate Lens and ABS Housing Sealed for Moisture Protection 2 Wire with Bullet Terminals DOT/P2, PC Optional Accessories available on Page 44 & 45 Base Not Included Chromed ABS HD25109PC Black ABS HD25109BP DIMENSIONS: 2.52 x 1.22 x 0.83 : 100mA HD25108R HD25108RC HD26002Y 2 LED 2.5 OVAL CLEARANCE MARKER LIGHT 2.5 RECTANGULAR CLEARANCE MARKER 8 LED HD25108Y HD26002YCSD HD26002YSD DIMENSIONS: 2.6 x 1.1 x 0.69 : 30mA Marker, Side Marker or ID Light Polycarbonate Lens and ABS Housing Sealed for Moisture Protection 2 Wire with Bullet Terminals DOT/P2, PC Optional Accessories available on Page 44 & 45 Base Not Included Chromed ABS HD25109PC Black ABS HD25109BP DIMENSIONS: 2.52 x 1.22 x 0.83 VOLT RANGE: 7.5-14 VDC : 100mA HD25108Y HD25108YC HD37004SMDR 4 LED 3.75 OVAL CLEARANCE MARKER LIGHT 2.5 RECTANGULAR CLEARANCE MARKER LIGHT HD25103RSD HD37004SMDRC HD37004SMDR 3528 SMD DIMENSIONS: 3.74 x 1.27 x 0.65 : 45mA Marker, Side Marker or ID Light Polycarbonate Lens and ABS Housing Sealed for Moisture Protection Snap Style Chrome Bezel Hides Screws (Included) 2 Wire with Bullet Terminals DOT/P2, PC Base Not Included Chromed ABS HD25000PC Connectors, HD00020, HD00021 DIMENSIONS: 2.52 x 1.22 x 0.83 : 45mA HD37004SMDY 4 LED 3.75 OVAL CLEARANCE MARKER LIGHT 2.5 RECTANGULAR CLEARANCE MARKER LIGHT HD25103YSD HD37004SMDYC HD37004SMDY 3528 SMD DIMENSIONS: 3.74 x 1.27 x 0.65 : 45mA Marker, Side Marker or ID Light Polycarbonate Lens and ABS Housing Sealed for Moisture Protection Snap Style Chrome Bezel Hides Screws (Included) 2 Wire with Bullet Terminals DOT/P2, PC Base Not Included Chromed ABS HD25000PC Connectors, HD00020, HD00021 DIMENSIONS: 2.52 x 1.22 x 0.83 : 45mA 38 LED SURFACE MOUNT CLEARANCE MARKER LIGHTS LED SURFACE MOUNT CLEARANCE MARKER LIGHTS 39
HD40112R 12 LED 4 RECTANGULAR CLEARANCE MARKER LIGHT 3 RECTANGULAR CLEARANCE MARKER LIGHT HD30106R HD40112R DIMENSIONS: 3.74 x 1.22 x 0.83 VOLT RANGE: 7.5-14 VDC : 150mA Base Not Included Chromed ABS HD40113PC Black ABS HD40113BP Pre-wired and Ready for install Screws Included DIMENSIONS: 3.15 x 1.0 x 1.06 : 60mA HD40112RC HD40112Y 12 LED 4 RECTANGULAR CLEARANCE MARKER LIGHT 3 RECTANGULAR CLEARANCE MARKER LIGHT HD30106Y HD40112YC HD40112Y DIMENSIONS: 3.74 x 1.22 x 0.83 : 140mA Base Not Included Chromed ABS HD40113PC Black ABS HD40113BP Pre-wired and Ready for install Screws Included DIMENSIONS: 3.15 x 1.0 x 1.06 VOLT RANGE: : 7.5-14 VDC 60mA HD60010 10 LED 2 X 6 REFLEX AUXILIARY TURN 3 WIRE CLEARANCE MARKER LIGHT 3 LIGHT STAINLESS STEEL ID BAR 24 LED HD25108R-3IDSS HD60010R-3 /Amber DIMENSIONS: 5.83 x 2.05 x 1.42 : HIGH: 80mA LOW: 50mA Universal Design Polycarbonate Lens and ABS Housing SeaLED against Moisture 3 Wire with Bullet Terminals Mounting Holes: 4.75 on Center DOT/P2, PC Mounting Hole Center: 15.75 Includes Connector Includes Wiring Harness DIMENSIONS: 16.5 x 1.38 x 1.25 VOLT RANGE: 7.5 14 VDC : 300mA HD60010Y-3 HD60020 20 LED 2 X 6 RECTANGULAR 2 WIRE CLEARANCE MARKER LIGHT 3 LIGHT STAINLESS STEEL ID BAR HD34001R-3IDSS HD60020R /Amber DIMENSIONS: 5.98 x 2.11 x 1.26 : 95mA Universal Design Polycarbonate Lens and ABS Housing Sealed against Moisture Mirror Style Chrome Reflector 2 Wire with Bullet Terminals Mounting Holes: 4.75 on Center Mounting Hole Center to Center: 15.75" Prewired with Wiring Harness Includes 3 each 3/4" Round Red Mini Clearance Marker Lights SMD DIMENSIONS: 15.9 x 1.46 x 1.81 VOLT RANGE: 7.5 14 VDC : 20mA DOT/P2, PC HD60020Y 40 LED SURFACE MOUNT CLEARANCE MARKER LIGHTS LED SURFACE MOUNT CLEARANCE MARKER LIGHTS 41
HD40106R 4 SLIM LINE 2 WIRE CLEARANCE MARKER LIGHT 6 OVAL CLEARANCE MARKER LIGHT 1 HD60813R 2 WIRE HD40106R DIMENSIONS: 3.86 x 0.71 x 0.95 VOLT RANGE: 7.5 14 VDC : 50mA Mounting Holes 2.83 on Center Rubber Base Gasket Included Pre-wired with Terminals 2-Wire Light Easy-install Loom HD00020-67F Includes Chromed ABS Bezel Base Gasket Included Pre-wired with 2 Male Terminals Mounting Holes 4 on Center DIMENSIONS: 6.7 x 2.32 x 0.87 : 130mA HD60813R 2 WIRE HD40106RC HD60813RC HD40106Y 4 SLIM LINE 2 WIRE CLEARANCE MARKER LIGHT 6 OVAL CLEARANCE MARKER LIGHT 1 HD60813Y 2 WIRE HD40106Y DIMENSIONS: 3.86 x 0.71 x 0.95 VOLT RANGE: 7.5 14 VDC : 50mA Mounting Holes 2.83 on Center Rubber Base Gasket Included Pre-wired with Terminals 2-Wire Light Easy-install Loom HD00020-67F Includes Chromed ABS Bezel Base Gasket Included Pre-wired with 2 Male Terminals Mounting Holes 4 on Center DIMENSIONS: 6.7 x 2.32 x 0.87 : 130mA HD60813Y 2 WIRE HD40106YC HD60813YC HD40106R 4 SLIM LINE 3 WIRE CLEARANCE MARKER LIGHT 6 OVAL CLEARANCE MARKER LIGHT 4 LED HD60804R 3 WIRE HD40106RC-3 3 WIRE HD40106R-3 DIMENSIONS: 3.86 x 0.71 x 0.95 VOLT RANGE: 7.5 14 VDC : HIGH: 70mA LOW: 50mA Mounting Holes 2.83 on Center Rubber Base Gasket Included Pre-wired with Terminals 2-Wire Light Easy-install Loom HD00020-67F Screws Hidden by Snap-style Chrome Bezel, Base Gasket Included Mounting Holes 4.75 on Center Uses Standard 2 Pin Connector, Not Included Available Connectors HD00020, HD00021 Available Continuous Loom HD00020-67F, HD00021-67F, HD00022-67F DIMENSIONS: 6.63 x 2.13 x 0.7 : 45mA HD60804RSD HD60804RCSD HD40106Y 4 SLIM LINE 3 WIRE CLEARANCE MARKER LIGHT 6 OVAL CLEARANCE MARKER LIGHT 4 LED HD60804Y 3 WIRE HD40106YC-3 3 WIRE HD40106Y-3 DIMENSIONS: 3.86 x 0.71 x 0.95 VOLT RANGE: 7.5 14 VDC : HIGH: 70mA LOW: 50mA Mounting Holes 2.83 on Center Rubber Base Gasket Included Pre-wired with Terminals 2-Wire Light Easy-install Loom HD00020-67F Screws Hidden by Snap-style Chrome Bezel Base Gasket Included Mounting Holes 4.75 on Center Uses Standard 2 Pin Connector, Not Included Available Connectors HD00020, HD00021 Available Continuous Loom HD00020-67F, HD00021-67F, HD00022-67F DIMENSIONS: 6.63 x 2.13 x 0.7 : 45mA HD60804YSD HD60804YCSD 42 LED SURFACE MOUNT CLEARANCE MARKER LIGHTS LED SURFACE MOUNT CLEARANCE MARKER LIGHTS 43
HD63015Y 15 LED FREIGHTLINER 2-WIRE TEARDROP SIDE MARKER TURN LIGHT FREIGHTLINER CASCADIA SIDE MARKER TURN LIGHT HD53009SMDY HD63015YCSD-2 HD63015YSD-2 DIMENSIONS: 6.06 x 3.31 x 0.79 : 250mA OEM Compatibility with: - Freightliner Century - Freightliner Classic - Freightliner Columbia - Freightliner Coronado Hard Wired with Bullet Terminals Mounting Holes 4.8 Center to Center DOT/SAE, P2pc OEM Compatibility with: - Freightliner Cascadia Polycarbonate Lens & ABS Housing Reflector Under Lens Sealed Circuit Board Hardwired with Straight 3 Pin Weather Pack Style Connector (Mates to Factory Harness) 6 3528 SMD 3 1W HP 3528 SMD/1W HP DIMENSIONS: 5.08 x 2.72 x 2.68 HIGH: 228mA LOW: 24mA HD53009SMDY REAR VIEW BOTH COLORS HD53009SMDYC HD63015Y 15 LED FREIGHTLINER 2-WIRE TEARDROP SIDE MARKER TURN LIGHT PETERBILT OVAL SIDE MARKER TURN LIGHT 8 LED HD45008SMD HD63015YCSD-2CB HD63015YSD-2CB DIMENSIONS: 6.06 x 3.31 x 0.79 : 250mA OEM Compatibility with: - Freightliner Century - Freightliner Classic - Freightliner Columbia - Freightliner Coronado Hard Wired with Bullet Terminals Mounting Holes 4.8 Center to Center DOT/SAE, P2pc Design for Use as a Side Marker/Turn Light for Peterbilt Trucks Polycarbonate Lens, ABS Housing Electronics Moisture & Corrosion Resistant Weather Pack Style Straight 3 Pin Connector (Mates to Factory Harness) Base Gasket Included Stainless Steel Mounting Studs and Nuts Included 5050 SMD DIMENSIONS: 4.43 x 2.1 x 0.375 : HIGH: 102mA LOW: 37mA HD45008SMDY HD45008SMDYC REAR VIEW BOTH COLORS HD63015Y 15 LED FREIGHTLINER 3-WIRE TEARDROP SIDE MARKER TURN LIGHT PETERBILT OVAL SIDE MARKER TURN LIGHT 8 LED HD45108SMDY HD63015YCSD-3 HD63015YSD-3 DIMENSIONS: 6.06 x 3.31 x 0.79 : HIGH: 250mA LOW: 170mA OEM Compatibility with: - Freightliner Century - Freightliner Classic - Freightliner Columbia - Freightliner Coronado Hard Wired with Bullet Terminals Mounting Holes 4.8 Center to Center DOT/SAE, P2pc Design for Use as a Side Marker/Turn Light for Peterbilt Trucks Polycarbonate Lens, ABS Housing Electronics Moisture & Corrosion Resistant Hard-wired, 3-Wire with Bullet Terminal Base Gasket Included Stainless Steel Mounting Studs and Nuts Included 5050 SMD DIMENSIONS: 4.43 x 2.1 x 0.375 : HIGH: 102mA LOW: 37mA HD45108SMDY HD45108SMDYC REAR VIEW BOTH COLORS HD63015Y 15 LED FREIGHTLINER 3-WIRE TEARDROP SIDE MARKER TURN LIGHT 4 RECTANGULAR REFLEX CLEARANCE MARKER LIGHT HD41003 HD63015YCSD-3CB HD63015YSD-3CB DIMENSIONS: 6.06 x 3.31 x 0.79 : HIGH: 250mA LOW: 170mA OEM Compatibility with: - Freightliner Century - Freightliner Classic - Freightliner Columbia - Freightliner Coronado Hard Wired with Bullet Terminals Mounting Holes 4.8 Center to Center DOT/SAE, P2pc Reflex Lens Design PC Lens and Housing Ultrasonically Welded into Single Unit 2 Wire with Bullet Terminal Includes Rubber Base Gasket 3MM /Amber DIMENSIONS: 3.98 x 1.42 x 0.35 : 20mA HD41003R HD41003Y 44 LED SURFACE MOUNT CLEARANCE MARKER LIGHTS LED SURFACE MOUNT CLEARANCE MARKER LIGHTS 45
HD50118RY-R 118 LED SINGLE POST 5 PEDESTAL PARK TURN LIGHT RIGHT SIDE DOUBLE POST 5 PEDESTAL PARK TURN LIGHT RIGHT SIDE 118 LED HD50118RY-R2 /Amber DIMENSIONS: 4.73 x 4.73 x 2.5 PARK/TURN: 1500mA MARKER: 150mA Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing Pre-wired, No Connector Required Chrome Housing Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing Pre-wired, No Connector Required Chrome Housing /Amber DIMENSIONS: 4.73 x 4.73 x 2.5 STOP/TURN: 1500mA PARK: 150mA FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW HD50118RY-L 118 LED SINGLE POST 5 PEDESTAL PARK TURN LIGHT LEFT DOUBLE POST 5 PEDESTAL PARK TURN LIGHT LEFT SIDE 118 LED HD50118RY-R2 /Amber DIMENSIONS: 4.73 x 4.73 x 2.5 PARK/TURN: 1500mA MARKER: 150mA Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing Pre-wired, No Connector Required Chrome Housing Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing Pre-wired, No Connector Required Chrome Housing /Amber DIMENSIONS: 4.73 x 4.73 x 2.5 STOP/TURN: 1500mA PARK: 150mA FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW HD50118YY-R 118 LED SINGLE POST 5 PEDESTAL PARK TURN LIGHT RIGHT SIDE DOUBLE POST 5 PEDESTAL PARK TURN LIGHT RIGHT SIDE 118 LED HD50118YY-R2 DIMENSIONS: 4.73 x 4.73 x 2.5 PARK/TURN: 1500mA MARKER: 150mA Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing Pre-wired, No Connector Required Chrome Housing Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing Pre-wired, No Connector Required Chrome Housing DIMENSIONS: 4.73 x 4.73 x 2.5 PARK/TURN: 1500mA MARKER: 150mA FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW HD50118YY-L 118 LED SINGLE POST 5 PEDESTAL PARK TURN LIGHT LEFT SIDE DOUBLE POST 5 PEDESTAL PARK TURN LIGHT LEFT SIDE 118 LED HD50118YY-L2 DIMENSIONS: 4.73 x 4.73 x 2.5 PARK/TURN: 1500mA MARKER: 150mA Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing Pre-wired, No Connector Required Chrome Housing Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing Pre-wired, No Connector Required Chrome Housing DIMENSIONS: 4.73 x 4.73 x 2.5 PARK/TURN: 1500mA MARKER: 150mA FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW 4 PEDESTAL MOUNT PARK TURN LIGHTS LED PEDESTAL MOUNT PARK TURN LIGHTS 47
HD15019Y 1 3 X 15 BLUNT NOSE TORPEDO CAB MARKER LIGHT 3 X 11 SQUARE CAB MARKER LIGHT & HOUSING 31 LED HD10131Y HD15019Y DIMENSIONS: 15.2 x 3.0 x 1.14 : 140mA Chromed ABS Housing Base Gasket Included Pre-wired, No Connector Required Mounting Holes Measure 10.5 Center to Center Chromed ABS Housing Includes Gasket Pre-wired and Ready for Install DIMENSIONS: 10.7 x 3.83 x 3.0 : 300mA HD15019YC HD10019Y 1 3 BLUNT NOSE TORPEDO CAB MARKER REPLACEMENT LIGHT 3 X 11 SQUARE CAB MARKER LIGHT & HOUSING 31 LED HD10131YC DIMENSIONS: 3.07 x 2.72 : 140mA Lamp Only Includes Gasket Pre-wired for Easy Install Designed to Fit: HD15019, HD15019YC and Similiar Lights Chromed ABS Housing Includes Gasket Pre-wired and Ready for Install DIMENSIONS: 10.7 X 3.83 X 3.0 VOLT RANGE: : 7.5-14 VDC 300mA HD10019Y HD10019YC HD15119Y 1 3 X 15 BULLET NOSE TORPEDO CAB MARKER LIGHT SQUARE CAB MARKER REPLACEMENT LIGHT 31 LED HD10031Y HD15119Y DIMENSIONS: 14.88 x 3.0 x 1.14 : 140mA Chromed ABS Housing Base Gasket Included Pre-wired, No Connector Required Mounting Holes Measure 10.5 Center to Center Pre-wired and Ready for Install Replacement Lights for: HD10131Y DIMENSIONS: 4.92 x 3.7 x 1.97 : 300mA HD15119YC HD10119Y 1 3 BULLET NOSE TORPEDO CAB MARKER REPLACEMENT LIGHT SQUARE CAB MARKER REPLACEMENT LIGHT 31 LED HD10031YC DIMENSIONS: 3.07 x 2.80 : 140mA Lamp Only Includes Gasket Pre-wired for Easy Install Designed to Fit: HD15019Y, HD15019YC and Similar Lights Pre-wired and Ready for Install Replacement Lights for: HD10131YC DIMENSIONS: 4.92 X 3.7 X 1.97 : 300mA HD10119Y HD10119YC 48 LED CAB MARKER LIGHTS LED CAB MARKER LIGHTS 49
HD63003Y FREIGHTLINER PRE 2014 CASCADIA CAB MARKER LIGHT HD00020 HD00021 HD00230 HD00022F HD00030 HD63003YSD HD63203Y HD63203YSD HD45012Y HD45012YC HD47004Y HD47004YSD HD63003YCSD HD63203YCSD REAR VIEW BOTH REAR VIEW BOTH 12 LED HD45012Y 4 LED HD47004YCSD DIMENSIONS: 5.88 x 1.77 x 1.86 : 40mA FREIGHTLINER POST 2014 CASCADIA CAB MARKER LIGHT DIMENSIONS: 5.88 x 1.77 x 1.86 : 40mA FREIGHTLINER RECTANGULAR CAB MARKER LIGHT DIMENSIONS: 4.5 x 2.2 x 1.5 : 140mA FREIGHTLINER RECTANGULAR CAB MARKER LIGHT DIMENSIONS: 4.7 x 2.39 x 0.34 : 22mA OEM Compatability with: Freightliner Cascadia Universal Design Polycarbonate Lens and ABS Housing SeaLED for Moisture Protection Mirror Chrome Diode Reflector Weather Pack Style Straight 2 Pin Connector (Mates to Factory Harness) OEM Compatability with: Freightliner Cascadia Universal Design Polycarbonate Lens and ABS Housing SeaLED for Moisture Protection Mirror Chrome Diode Reflector Weather Pack Style Straight 2 Pin Connector (Mates to Factory Harness) Polycarbonate Lens ABS Housing Base Gasket Included Hard-wired with Bullet Connectors Factory Style Angled 2 Pin Weather Pack Connector Mounting Holes 3 5/8 On Center SAE DOT P2 13 CONNECTORS CONNECTORS CONNECTORS HD00031 HD00020-200 2 PIN IN-LINE MALE CONNECTOR 3 PIN STRAIGHT MALE CONNECTOR 2 PIN CONTINUOUS LOOM 12 SPACING 200 MALE PLUGS CONNECTORS CONNECTORS CONNECTORS 2 PIN 90 ANGLE CONNECTOR HD00032F 3 PIN STRAIGHT FEMALE CONNECTOR HD00020-10024 2 PIN LOOM CONTINUOUS LOOM 24 SPACING 100 MALE PLUGS CONNECTORS CONNECTORS CONNECTORS 2 PIN 90 ANGLE MALE CONNECTOR HD00036WP 3 PIN CONNECTOR TO WEATHERPACK CONNECTOR HD00030-100 3 PIN CONTINUOUS LOOM 12 SPACING 100 MALE PLUGS CONNECTORS CONNECTORS CONNECTORS 2 PIN IN-LINE FEMALE CONNECTOR HDTS06-2S6 6 PIGTAIL WITH DEUTSCH CONNECTOR 6 CONTINUOUS 2 PIN LOOM RIGHT ANGLE CONNECTORS FITS ALL CLEARANCE MARKER LIGHTS WITH 2 PIN MALE CONNECTORS HD00020-67F 2 PIN CONTINUOUS LOOM 18 SPACING 67 FEMALE PLUGS CONNECTORS CONNECTORS CONNECTORS 3 PIN 90 ANGLE CONNECTOR HD00020-100 2 PIN CONTINUOUS LOOM 6 PLUG SPACING 100 MALE PLUGS HD00021-67F 2 PIN CONTINUOUS LOOM 12 SPACING 67 FEMALE PLUGS 50 LED CAB MARKER LIGHTS CONNECTORS & MOUNTING ACCESSORIES 51
Be Visible. Stay Safe. HD00022-67F XX HD00021-100F XX HD00022-108F XX HD40099SS XX HD50095G XX HD21000SS HD26000-SLEEK HD34000SS HD26000-OVAL HD63000CB BEZEL BEZEL GROMMET BEZEL CONNECTORS HD20095G XX HD20096PC XX 2 PIN CONTINUOUS 2 CHROME LOOM PLASTIC 6 BEZEL SPACING 67 FEMALE PLUGS 2 2 GROMMET CHROME PLASTIC BEZEL 2 CHROME PLASTIC BEZEL BEZEL BEZEL GROMMET BEZEL CONNECTORS 2 PIN CONTINUOUS 2 CHROME LOOM PLASTIC 12 SPACING BEZEL 100 FEMALE PLUGS HD25095G XX 2.5 2 GROMMET CHROME APPROXIMATE PLASTIC MOUNTING BEZEL HOLE SIZE: 3 HD25096PC XX 2.5 2 CHROME PLASTIC BEZEL BEZEL BEZEL GROMMET BEZEL CONNECTORS 2 PIN CONTINUOUS 2 CHROME LOOM PLASTIC 6 SPACING BEZEL 108 FEMALE PLUGS HD25195G XX 2.5 2 GROMMET CHROME APPROXIMATE PLASTIC MOUNTING BEZEL HOLE SIZE: 2.75 HD40096PC XX 2 4 CHROME PLASTIC BEZEL BEZEL BEZEL GROMMET BEZEL SECURITY FLANGE HD40095G XX HD60096PC XX 4" 2 STAINLESS CHROME SECURITY PLASTIC FLANGE BEZEL 4 2 GROMMET CHROME PLASTIC BEZEL 6 OVAL 2 CHROME PLASTIC BEZEL BEZEL BEZEL GROMMET GROMMET BEZEL RECTANGLE 2 GROMMET CHROME PLASTIC BEZEL HD60095G XX 6 OVAL 2 GROMMET CHROME PLASTIC BEZEL HD60097PC XX 6 OVAL 2 CHROME PLASTIC PLASTIC BEZEL W/ BEZEL VISOR BASE MOUNT BASE GASKET BEZEL HD26000-RG HD25000PC OVAL STAINLESS STEEL BEZEL FITS HD21002 MARKER RUBBER GASKET FITS HD26002 ABS CHROME BASE MOUNT FITS HD25103 BASE MOUNT BRUSH GUARD BEZEL HD26000-SS HD25109BP 2 CHROME PLASTIC BEZEL FITS HD26002 STAINLESS BRUSH GUARD FITS HD26002 ABS BLACK BASE MOUNT FITS HD25108 BASE MOUNT BRUSH GUARD BEZEL ROUND STAINLESS STEEL BEZEL FITS HD34003 HD40811C CHROME BRUSH GUARD FITS HD40810 HD25109PC ABS CHROME BASE MOUNT FITS HD25108 BASE MOUNT BASE MOUNT BEZEL HD31703-APAD RUBBER 30 DEGREE ANGLED BASE MOUNT FITS HD31703 HD40113BP OVAL CHROME PLASTIC BEZEL FITS HD26002 ABS BLACK BASE MOUNT FITS HD40112 BASE MOUNT BASE MOUNT BEZEL TEARDROP CHROME PLASTIC BEZEL FITS HD63015 HD72006-APAD RUBBER 30 DEGREE ANGLED BASE MOUNT FITS HD72006 HD40113PC ABS CHROME BASE MOUNT FITS HD40112 52 LED CONNECTORS STOP TAIL & MOUNTING TURN & ACCESSORIES PARK TURN LIGHTS CONNECTORS & MOUNTING ACCESSORIES 53
HDF03054 3 PIN ELECTRONIC WIGWAG LED FLASHER ELECTRONIC WIGWAG LED FLASHER 3 PIN HDF03058 VOLTAGE: AMPS: FLASH RATE: TERMINALS: 12VDC 60mA 60-120 FPM (+)(L1)(L2) Variable Load Electronically Controlled Provides Steady Flash Rate for all LED and Incandescent Lamps Bracket Included Variable Load Electronically Controlled External Ground Provides Steady Flash Rate for all LED and Incandescent Lamps Bracket Included VOLTAGE: AMPS: FLASH RATE: TERMINALS: 12VDC 60mA-15A 60-120 FPM (X)(P)(L) WATTS: 3W-120W WATTS: 0.1W-130W HDF03055 2 PIN ELECTRONIC LED FLASHER ELECTRONIC LED FLASHER 5 PIN HDF03083 VOLTAGE: AMPS: FLASH RATE: TERMINALS: WATTS: 12VDC 60mA-15A 60-120 FPM (+)(L) 0.1W-130W Variable Load Electronically Controlled Flash Rate Provides Steady Flash Rate for All LED and Incandescent Lamps External Ground Bracket Included Popular Replacement in Peterbilt, Kenworth, and Other Applications ISO Terminals Designed for Use with Factory Wiring as a Direct Replacement for the OE Flasher Variable Load Electronically Controlled Flash Rate Provides Steady Flash Rate for Turn Signals and Hazard Lamps Works with All LED and Incandescent Lamps Popular FORD Replacement VOLTAGE: AMPS: FLASH RATE: TERMINALS: WATTS: 12VDC 60mA 60-120 FPM (I)(B)(H)(E)(L) 162W MAX HDF03056 3 PIN ELECTRONIC LED FLASHER ELECTRONIC LED FLASHER 4 PIN HDF03084 VOLTAGE: AMPS: FLASH RATE: TERMINALS: WATTS: 12VDC 60mA-15A 60-120 FPM (+)(L) 0.1W-130W North American, (ISO) Pin Out Flasher Variable Load Electronically Controlled Flash Rate Provides Steady Flash Rate for All LED and Incandescent Lamps Bracket Included Uses Smaller 280 terminals Designed for Use with Factory Wiring as a Direct Replacement for the OE Flasher Variable Load Electronically Controlled Flash Rate Provides Steady Flash Rate for Turn Signals and Hazard Lamps VOLTAGE: AMPS: FLASH RATE: TERMINALS: WATTS: 12VDC 1A-15A 60-120 FPM (-)(+)(S)(L) 162W Max Works with All LED and Incandescent Lamps Popular GM Replacement HDF03057 3 PIN ELECTRONIC LED FLASHER VOLTAGE: AMPS: FLASH RATE: TERMINALS: WATTS: 12VDC 60mA-15A 60-120 FPM (-31)(L/49a)(+/49) 0.1W-130W North American, (ISO)Pin Out Flasher Variable Load Electronically ControlLED Provides Steady Flash Rate for all LED and incandescent Lamps Bracket Included 54 LED ELECTRONIC FLASHERS LED ELECTRONIC FLASHERS 55
921/912 T15 AMBER 194 T10 GREEN STYLE 194 COOL WHITE PURPLE RED COOL WHITE HD1156YSD-18 GREEN STYLE 921 HD1157YSD 1 HD1156RSD-18 HD3156WSD 1 COOL WHITE HD1157RSD 1 1 HD1156WSD-18 HD1157WSD AMBER COOL WHITE RED HD1157YSD-18 18 LED AMBER STYLE 1156 HD3156YSD 1 HD1157RSD-18 18 LED AMBER HD3157RSD NA HD3157YSD 1 AMBER COOL WHITE COOL WHITE NOT AVAILABLE 18 LED RED AMBER HD3157RSD-18 NA HD3156YSD-18 18 LED COOL WHITE 1 RED 1 AMBER AMBER 18 LED COOL WHITE 18 LED RED 18 LED AMBER STYLE 3157 3MM 3MM SMD 3MM WIDTH: 0.5 WIDTH: 0.63 WIDTH: 0.5 WIDTH: 0.5 HEIGHT: 0.84 HEIGHT: 1 HEIGHT: 1 HEIGHT: 1.2 VOLTAGE: 8-14 VDC VOLTAGE: 8-14 VDC VOLTAGE: 8-14 VDC VOLTAGE: 8-14 VDC WIDTH: HEIGHT-13 0.93 HEIGHT-18 1.75 WIDTH: HEIGHT-13 0.93 HEIGHT-18 1.75 WIDTH: HEIGHT-13 0.93 HEIGHT-18 1.75 WIDTH: HEIGHT-13 0.93 HEIGHT-18 1.75 : 30mA : 36mA : 35mA : 36mA VOLTAGE: 2.0 AMPS-13 8-14 vdc AMPS-18.24A.29A VOLTAGE: 2.0 AMPS-13 8-14 VDC AMPS-18 S/T:.29A, T:.08A S/T.31A, T:09A VOLTAGE: 2.0 AMPS-13 8-14 vdc AMPS-18.24A.29A VOLTAGE: 2.0 AMPS-13 8-14 VDC AMPS-18 S/T.29A, T:.08A S/T:.31A, T:.09A 194 t10 & 194 t10 360: Above SAE replacements for 158, 168, 194, 12961 and others. Each Part# is one package / package includes two bulbs For aftermarket use: For after market use. May not comply with SAE or U.S. DOT standards. Perfect replacement for most * incandescent vehicle lighting. Fit standard vehicle sockets. Super bright 360 degree light dispersion design. Resistor Statement: Since LED bulbs draw much less current then standard incandescent bulbs some vehicle computers may think a bulb is out. If installing LED bulbs in your car, truck or motorcycle causes your blinkers to blink fast or causes other electrical problems it may be necessary to install a load resistor to correct these problems. Thermal Flasher: LED brake/tail lamps my not work with some older thermal flasher units. An LED brake/tail lamp will require an electronic flasher/blinker unit which is commonly available at your local auto parts store or from HDL. HD3157YSD-18 18 LED STYLE 3156 1 HD3157WSD-18 HD3156WSD-18 18 LED 18 LED STYLE 1157 COOL WHITE NOT AVAILABLE RED HD1157WSD-18 18 LED HD3157WSD 1 3157 3157 3157 3157 3157 3157 HD1156YSD 921/912 T15 HD92109W-3G 5 LED 1156 1156 1156 1156 1156 1156 COOL WHITE GREEN STYLE 194 RED 921/912 T15 194 T10 194 T10 194 T10 GREEN HD1156RSD 921/912 T15 HD92109W-3B 5 LED HD19405W-SMDG COOL WHITE 921/912 T15 194 T10 194 T10 194 T10 194 T10 HD19405W-SMDB HD1156WSD 1 921/912 T15 194 T10 194 T10 194 T10 194 T10 1895 BA9S 1895 BA9S HD92109W-3P 5 LED COOL WHITE HD19406W-3G STYLE 1895 AMBER HD19405W-SMDP COOL WHITE HD92109W-3A 5 LED PURPLE HD19406W-3B 1895 BA9S HD19406B-3G HD19405W-SMDA PURPLE 1895 BA9S HD19406B-3B RED AMBER HD19406W-3P HD92109W-3R 5 LED RED AMBER COOL WHITE HD19405W-SMDR RED HD19406W-3A HD92109W-3W 5 LED COOL WHITE HD19406W-3R HD19406B-3A HD19406B-3P HD19405W-SMDW COOL WHITE 1895 BA9S HD19406B-3R HD19406W-3W 1895 BA9S HD19406B-3W 3156 3156 3156 3156 3156 3156 1157 1157 1157 1157 1157 1157 Be Visible. Stay Safe. EACH PART NUMBER IS ONE PACKAGE. PACKAGE INCLUDES ONE BULB. 56 LED REPLACEMENT BULBS LED REPLACEMENT BULBS 57
Be Visible. Stay Safe. HD1156WSMD-18 18 LED HD1157WSMD-18 18 LED HD3156WSMD-18 18 LED HD3157WSMD-18 18 LED HD67018W 18 LED HD68018W 18 LED HD89009SMDW HD90009SMDW 1156 1157 3156 3157 COOL WHITE COOL WHITE COOL WHITE COOL WHITE 67 68 89 90 COOL WHITE COOL WHITE COOL WHITE COOL WHITE HD1156RSMD-18 18 LED HD1157RSMD-18 18 LED NOT AVAILABLE HD3157RSMD-18 18 LED HD67018R 18 LED HD68018R 18 LED HD89009SMDR HD90009SMDR 1156 1157 3156 NA 3157 RED RED RED 67 68 89 90 RED RED RED RED HD1156YSMD-18 18 LED HD1157YSMD-18 18 LED HD3156YSMD-18 18 LED HD3157YSMD-18 18 LED HD67018Y 18 LED HD68018Y 18 LED HD89009SMDY HD90009SMDY 1156 AMBER 1157 AMBER 3156 AMBER 3157 AMBER 67 68 89 90 AMBER AMBER AMBER AMBER STYLE 1156 SMD WIDTH: 0.67 HEIGHT: 1.73 VOLTAGE: 8-14 VDC :.15A STYLE 1157 SMD WIDTH: 0.67 HEIGHT: 1.73 VOLTAGE: 8-14 VDC : Stop/turn:.16A Tail:.02A STYLE 3156 SMD WIDTH: 0.67 HEIGHT: 2.24 VOLTAGE: 8-14 VDC :.15A STYLE 3157 SMD WIDTH: 0.67 HEIGHT: 2.24 VOLTAGE: 8-14 VDC : Stop/Turn:.16A Tail:.02A STYLE 67 WIDTH: 0.75 HEIGHT: 1.56 VOLTAGE: 8-14 VDC :.24A Tail:.02A STYLE 68 WIDTH: 0.75 HEIGHT: 1.56 VOLTAGE: 8-14 VDC : Stop/Turn:.29A Tail:.08A STYLE 89 SMD WIDTH: 0.75 HEIGHT: 1.48 VOLTAGE: 8-14 VDC :.07A Tail:.02A STYLE 90 SMD WIDTH: 0.75 HEIGHT: 1.48 VOLTAGE: 8-14 VDC : Stop/Turn:.08A Tail:.02A EACH PART NUMBER IS ONE PACKAGE. PACKAGE INCLUDES ONE BULB. EACH PART NUMBER IS ONE PACKAGE. PACKAGE INCLUDES TWO BULBS. ALL 67 AND 89 BULBS ARE SINGLE CONTACT, SINGLE FUNCTION. FIT MOST SAE CROSS REFERENCES 67, 89, 1003, 1156. ALL 68 AND 90 BULBS ARE TWO CONTACT, TWO FUNCTION. FIT MOST SAE CROSS REFERENCES: 68, 90, 94, 1157. 58 LED STOP REPLACEMENT TAIL TURN BULBS& PARK TURN LIGHTS LED REPLACEMENT BULBS 59
HDDSPB1 14 UNITS 23 X 16 SELF-POWERED ILLUMINATED DISPLAY BOARD 23 X 16 SELF-POWERED ILLUMINATED DISPLAY BOARD 8 UNITS HDDSPB5 HD20010R: 10 LED 2 Red Clearance Marker HD20010Y: 10 LED 2 Amber Clearance Marker HD20010RC: 10 LED 2 Clear Red Clearance Marker HD20010YC: 10 LED 2 Clear Amber Clearance Marker HD20310R: 10 LED 2 Red Beehive Clearance Marker HD20310Y: 10 LED 2 Amber Beehive Clearance Marker HD25013R: 1 2.5 Red Clearance Marker HD25013Y: 1 2.5 Amber Clearance Marker HD25013RC: 1 2.5 Clear Red Clearance Marker HD25013YC: 1 2.5 Clear Amber Clearance Marker HD40810RC: 10 LED Clear Red BullsEye Clearance Marker HD40810YC: 10 LED Clear Amber BullsEye Clearance Marker HD60813RC: 1 Clear Red Clearance Marker HD60813YC: 1 Clear Amber Clearance Marker HD60060R: 60 LED 6 Oval Red Stop/Tail/Turn HD60060Y: 60 LED 6 Oval Amber Park/Turn HD60010RSD: 10 LED 6 Oval Red Stop/Tail/Turn HD60010YSD: 10 LED 6 Oval Amber Park/turn HD40012RSD: 12 LED 4 Round Red Stop/Tail/Turn HD40012YSD: 12 LED 4 Round Amber Park/Turn HD40007RSD: 7 LED 4 Round Red Stop/Tail/Turn HD40007RSD: 7 LED 4 Round Amber Park/Turn * PREWIRED WITH AC/DC POWER ADAPTER HDDSPB2 10 UNITS 23 X 16 SELF-POWERED ILLUMINATED DISPLAY BOARD 23 X 16 SELF-POWERED ILLUMINATED DISPLAY BOARD 11 UNITS HDDSPB6 HD40012RSD: 12 LED 4 Red Stop/Tail/Turn HD40012YSD: 12 LED 4 Amber Park/Turn HD40212PC: 12 LED White License HD40212BL: 12 LED White License HD40106R: 4 Red Slim-line Clearance Marker HD40106Y: 4 Amber Slime-line Clearance Marker HD40810R: 10 LED Red Dbl. BullsEye Clearance Marker HD40810Y: 10 LED Amber Dbl. BullsEye Clearance Marker HD60813R: 1 Red Clearance Marker HD60813Y: 1 Amber Clearance Marker HD60010RSD: 10 LED 6 Oval Re Stop/Tail/Turn HD60010YSD: 10 LED 6 Oval amber Park/Turn HD60010WSD: 10 LED 6 Oval White Back-Up HD25108R: 8 LED 2.5 Rectangle Red Clearance Marker HD25108Y: 8 LED 2.5 Rectangle Amber Clearance Marker HD30106R: Rectangle Red Clearance Marker HD30106Y: Rectangle Amber Clearance Marker HD40112RC: 12 LED 4 Rectangle Clear Red Marker HD40112YC: 12 LED 4 Rectangle Clear Amber Marker HD60804RSD: 4 LED Oval Marker with Chrome Bezel HD60804YSD: 4 LED Oval Marker with Chrome Bezel * PREWIRED WITH AC/DC POWER ADAPTER HDDSPB3 11 UNITS 23 X 16 SELF-POWERED ILLUMINATED DISPLAY BOARD 23 X 16 SELF-POWERED ILLUMINATED DISPLAY BOARD 14 UNITS HDDSPB7 HD60015RSD: 15 LED 6 Oval Red Stop/Tail/Turn HD60021YSD: 21 LED 6 Oval Amber Park/Turn HD60027WSD: 27 LED 6 Oval White Back-Up HD25108R: 8 LED 2.5 Red Clearance Marker HD25108Y: 8 LED 2.5 Amber Clearance Marker HD40112R: 12 LED 4 Red Clearance Marker HD40112Y: 12 LED 4 Amber Clearance Marker HD40112RC: 12 LED 4 Clear Red Clearance Marker HD40112YC: 12 LED 4 Clear Amber Clearance Marker HD30106R: Red Clearance Marker HD30106Y: Amber Clearance Marker HD20010R: 10 LED 2 Round Red Clearance Marker HD20010Y: 10 LED 2 Round Amber Clearance Marker HD20003RSD: 2 Round Red Clearance Marker HD20003YSD: 2 Round Amber Clearance Marker HD25013R:" 1 2.5 Round Red Clearance Marker HD25013Y: 1 2.5 Round Amber Clearance Marker HD25003RSD: 2.5 Round Red Clearance Marker HD25003YSD: 2.5 Round Amber Clearance Marker HD20310R: 10 LED 2 BEEHIVE Red Clearance Marker HD20310Y: 10 LED 2 BEEHIVE Amber Clearance Marker HD60020R: 20 LED 2X6 Rectangle Red Clearance Marker HD60020Y: 20 LED 2X6 Rectangle Amber Clearance Marker HD60804RSD: 4 LED Oval Marker with Chrome Bezel HD60804YSD: 4 LED Oval Marker with Chrome Bezel * PREWIRED WITH AC/DC POWER ADAPTER HDDSPB4 8 UNITS 23 X 16 SELF-POWERED ILLUMINATED DISPLAY BOARD 23 X 16 SELF-POWERED ILLUMINATED DISPLAY BOARD 22 UNITS HDDSPB8 * PREWIRED WITH AC/DC POWER ADAPTER HD60060R: 60 LED 6 Oval Red Stop/Tail/Turn HD60060Y: 60 LED 6 Oval Amber Park/Turn HD60013RCSDM: 1 6 Oval Clear Red Stop/Tail/Turn* HD60027YCSDM: 27 LED 6 Oval Clear Amber Park/Turn* HD40040R: 40 LED 4 Red Stop/Tail/Turn HD40040Y: 40 LED 4 Amber Park/Turn HD40012RCSDM: 12 LED 4 Clear Red Stop/Tail/Turn* HD40012YCSDM: 12 LED 4 Clear Amber Park/Turn* HD34003BCSMD: HD34003RCSMD: HD34003RSMD: HD34003WCSMD: HD34003YCSMD: HD34003YSMD: HD21002SMDBC: 2 LED HD21002SMDRC: 2 LED HD21002SMDR: 2 LED HD21002SMDWC: 2 LED HD21002SMDYC: 2 LED 3/4 Rnd Clear/Blue Clearance Marker HD21002SMDY: 2 LED Oval Amber Clearance Marker 3/4 Rnd Clear/Red Clearance Marker HD26002RCSD: 2 LED Oval Clear/Red Clearance Marker 3/4 Rnd Red Clearance Marker HD26002RSD: 2 LED Oval Red Clearance Marker 3/4 Rnd Clear/White Clearance Marker HD26002YCSD: 2 LED Oval Clear/Amber Clearance Marker 3/4 Rnd Clear/Amber Clearance Marker HD26002YS: 2 LED Oval Amber Clearance Marker 3/4 Rnd Amber Clearance Marker HD20007SMDR: 7 LED Red Surface Mount Marker Oval Clear/Blue Clearance Marker HD20007SMDY: 7 LED Amber Surface Mount Marker Oval Clear/Red Clearance Marker HD25009SMDR: Red Surface Mount Marker Oval Red Clearance Marker HD25009SMDY: Amber Surface Mount Marker Oval Clear/White Clearance Marker HD37004SMDR: 4 LED Red Surface Mount Marker Oval Clear/Amber Clearance Marker HD37004SMDY: 4 LED Amber Surface Mount Marker * PLUS MIRROR REFLECTOR UNDER LENS 60 DISPLAYS & SALES AIDS DISPLAYS & SALES AIDS 61
HDD408DSP 8 UNITS LED WORK LIGHT DISPLAY PART# PAGE PART# PAGE PART# PAGE PART# PAGE PART# PAGE PART# PAGE PART# PAGE HDD405DSP BANNERS HD46006-3WFL: High Output Round Slim Line Work Light HD46008-3SP: 8 LED High Output Oval Work Light HD42505-3WFL: 5 LED High Output Square Slim Line Work Light HD55009-3WFL: High Output Round Work Lights HD52609-3WFL: High Output Sqaure Work Light HD47554WL: 54 LED Round Work Light Rubber Housing HD46206-3SP: High Output Rectangular Work Lights HD47506WFL: High Output Round Work Light Rubber Housing Banner2W 6 White Vinyl Banner 4 Grommets 2 X6 Banner2B 6 Black Vinyl Banner 4 Grommets 2 X6 BOTH RACKS ARE DESIGNED FOR COUNTER OR PEGBOARD USE. ALSO INCLUDED: POS SIGN W/MOUNTED SOCKET & HD1156YSD BULB PLUS POWER TRANSFORMER TO SHOW THE BULB LIT UP! HDLC1-12-2A HD32006-3WFL: High Output Mini Square Work Light HD35003-3YWFL: High Output Mini Round Spot Lamp HD31703-5WFL: High Output Surface Mount Work/Clearance Light HD31703-3YFL: High Output Surface Mount Work/Clearance Light HD72006-3WFLFM: Flush Mount Slim Rectangular Hight Power Work Flood Lamp AC to DC Power Adapter AC100-240V input DC12V 2.0 AMP Output Equipped with: Red (+) and Black (-) Alligator Clips SHOWROOM WORK LIGHT DISPLAY: Designed for use as A stand-alone counter top display or can be hung on slat wall. INCLUDES AC TO DC POWER ADAPTOR, POP DISPLAY LITERATURE AND EIGHT OF OUR MOST POPULAR LIGHTS. 15 LOOP WIRE DISPLAY RACK (STOCKED): DSPBLB1 HDLC-2307 Includes The Following HD1156YSD HD1156WSD HD1157YSD HD1157RSD HD1157WSD HD3156YSD HD3156WSD HD3157YSD HD3157RSD HD3157WSD (4 Ea.) (2 Ea.) (2 Ea.) (4 Ea.) (2 Ea.) (4 Ea.) (2 Ea.) (2 Ea.) (4 Ea.) (2 Ea.) AC to DC Power Adapter AC100-240V input DC12V 1.0 AMP Output Equipped with: Red (+) and Black (-) Alligator Clips BANNER1B 62 BANNER1W 62 BANNER2B 62 BANNER2W 62 DSPBLB1 62 DSPBLB1-1 62 HD00020 51 HD00020-100 51 HD00020-200 51 HD00021 51 HD00021-100F 52 HD00022-108F 52 HD00022-67F 52 HD00022F 51 HD00030 51 HD00031 51 HD00032F 51 HD00036WP 51 HD00230 51 HD10019Y 48 HD10019YC 48 HD10031Y 49 HD10031YC 49 HD10119Y 48 HD10119YC 48 HD10131Y 49 HD10131YC 49 HD1156RSD 57 HD1156RSD-18 57 HD1156RSMD-18 58 HD1156WSD 57 HD1156WSD-18 57 HD1156WSMD-18 58 HD1156YSD 57 HD1156YSD-18 57 HD1156YSMD-18 58 HD1157RSD 57 HD1157RSD-18 57 HD1157RSMD-18 58 HD1157WSD 57 HD1157WSD-18 57 HD1157WSMD-18 58 HD1157YSD 57 HD1157YSD-18 57 HD1157YSMD-18 58 HD12018CW-DC 27 HD15019Y 48 HD15019YC 48 HD15119Y 48 HD15119YC 48 HD17011RCSD 19 HD17011RSD 19 HD18027CW-DC 27 HD19405W-SMDA 56 HD19405W-SMDB 56 HD19405W-SMDG 56 HD19405W-SMDP 56 HD19405W-SMDR 56 HD19405W-SMDW 56 HD19406B-3A 56 HD19406B-3B 56 HD19406B-3G 56 HD19406B-3P 56 HD19406B-3R 56 HD19406B-3W 56 HD19406W-3A 56 HD19406W-3B 56 HD19406W-3G 56 HD19406W-3P 56 HD19406W-3R 56 HD19406W-3W 56 HD20003RCSD 31 HD20003RSD 31 HD20003YCSD 31 HD20003YSD 31 HD20007SMDR 36 HD20007SMDY 36 HD20009R 31 HD20009Y 31 HD20010R 32 HD20010RC 32 HD20010Y 32 HD20010YC 32 HD20095G 52 HD20096PC 52 HD20309R 34 HD20309Y 34 HD20310R 34 HD20310RC 34 HD20310Y 34 HD20310YC 34 HD21000SS 53 HD21002SMDR 30 HD21002SMDBC 30 HD21002SMDRC 30 HD21002SMDWC 23 HD21002SMDY 30 HD21002SMDYC 30 HD23012SMD-CW 27 HD23024SMD-CW 27 HD24036CV-DC 27 HD25000PC 53 HD25003RCSD 32 HD25003RSD 32 HD25003WSD 21 HD25003YCSD 32 HD25003YSD 32 HD25009SMD 36 HD25009SMDR 36 HD25009SMDY 36 HD25012R 33 HD25012Y 33 HD25013R 33 HD25013RC 33 HD25013Y 33 HD25013YC 33 HD25095G 52 HD25096PC 52 HD25103RSD 39 HD25103WSD 22 HD25103YSD 39 HD25108R 39 HD25108R-3IDSS 41 HD25108RC 39 HD25108W 22 HD25108Y 39 HD25108YC 39 HD25109BP 53 HD25109PC 53 HD25113R 36 HD25113Y 36 HD25195G 52 HD25312R 35 HD25312Y 35 HD25313R 35 HD25313RC 35 HD25313Y 35 HD25313YC 35 HD26000-RG 53 HD26000-SLEEK 53 HD26000-SS 53 HD26002RCSD 38 HD26002RSD 38 HD26002YCSD 38 HD26002YSD 38 HD26004-3SP 10 HD26004-3WFL 10 HD30004BL 23 HD30106R 41 HD30106Y 41 HD3156WSD 57 HD3156WSD-18 57 HD3156WSMD-18 58 HD3156YSD 57 HD3156YSD-18 57 HD3156YSMD-18 58 HD3157RSD 57 HD3157RSD-18 57 HD3157RSMD-18 58 HD3157WSD 57 HD3157WSD-18 57 HD3157WSMD-18 58 HD3157YSD 57 HD3157YSD-18 57 HD3157YSMD-18 58 HD31703-3GFL 9 HD31703-3RFL 9 HD31703-3YFL 9 HD31703-5BFL 9 HD31703-5WFL 9 HD32000-AF 10 HD32000-BF 10 HD32000-YF 10 HD32006-3SP 10 HD32006-3WFL 10 HD33006-3SP 11 HD34000SS 53 HD34001R-3IDSS 41 HD34003-3RCSMD 29 HD34003-3RSMD 29 HD34003-3YCSMD 29 HD34003-3YSMD 29 HD34003BCSMD 30 HD34003RCSMD 29 HD34003RSMD 29 HD34003WCSMD 24 HD34003YCSMD 29 HD34003YSMD 29 HD34103RCSMD 28 HD34103RSMD 28 HD34103WCSMD 24 HD34103YCSMD 28 HD34103YSMD 28 HD35003-3SP 11 HD35003-3WFL 11 HD35003-3YSP 11 HD35003-3YWFL 11 HD35006-3SP 10 HD35006-3WFL 10 HD35015WSD 24 HD35018WSD 24 HD36054CW-DC 27 HD37004SMDR 38 HD37004SMDRC 38 HD37004SMDY 38 HD37004SMDYC 38 HD40007RSD 13 HD40007WSD 20 HD40007YSD 13 HD40012RCSDM 14 HD40012RSD 14 HD40012WSD 20 HD40012YCSDM 14 HD40012YSD 14 HD40032R 13 HD40032Y 13 HD40040R 12 HD40040RC 12 HD40040W 20 HD40040Y 12 HD40040YC 12 HD40056W 20 HD40095G 52 HD40096PC 52 HD40099SS 52 HD40106R 42 HD40106R-3 42 HD40106RC 42 HD40106RC-3 42 HD40106Y 42 HD40106Y-3 42 HD40106YC 42 HD40106YC-3 42 HD40112R 40 HD40112RC 40 HD40112W 22 HD40112Y 40 HD40112YC 40 HD40113BP 53 HD40113PC 53 HD40212BL 23 HD40212PC 23 HD40810R 37 HD40810RC 37 HD40810RCSMD 37 HD40810RSMD 37 HD40810Y 37 HD40810YC 37 HD40810YCSMD 37 HD40810YSMD 37 HD40811C 53 HD41003R 45 HD41003Y 45 HD42504WHP 11 HD42504YHP 11 HD42505-3WFL 7 HD42505-3WFLMAGP7 HD42505-3WFLMAGS7 HD45006-1WFL 8 HD45006-3WFL 8 HD45006-3WSP 8 HD45008SMDY 45 HD45008SMDYC 45 HD45012Y 50 HD45012YC 50 HD45108SMDY 45 HD45108SMDYC 45 HD46006-3WFL 7 HD46006-3WFLMAGP7 HD46006-3WFLMAGS7 HD46008-3SP 5 HD46008-3WFL 5 HD46206-3SP 4 HD46206-3WFL 4 HD46208-3SP 4 HD46208-3WFL 4 HD46209-3SP 4 HD46209-3WFL 4 HD46308-3SP 4 HD46308-3WFL 4 HD46516-3SP 5 HD46516-3WFL 5 HD47004YCSD 50 HD47004YSD 50 HD47506WFL 6 HD47554WL 6 HD48072CW-DC 27 HD50014-3SP 5 HD50014-3WFL 5 HD50060R 17 HD50060Y 17 HD50095G 52 HD50118RY-L 46 HD50118RY-L2 46 HD50118RY-R 46 HD50118RY-R2 47 HD50118YY-L 46 HD50118YY-L2 47 HD50118YY-R 46 HD50118YY-R2 47 HD52609-3WFL 6 HD53009SMDY 45 HD53009SMDYC 45 HD55009-3WFL 6 HD57007WSD 25 HD57011WSD 25 HD57015WSD 25 HD57018WSD 25 HD57033RSDM 18 HD57039RSDM 18 HD60010R-3 40 HD60010RSD 15 HD60010WSD 21 HD60010Y-3 40 HD60010YSD 15 HD60013RCSDM 15 HD60015RSD 16 HD60018YSD 19 HD60020R 40 HD60020Y 40 HD60021YSD 16 HD60027WSD 21 HD60027YCSDM 15 HD60042R 17 HD60042Y 17 HD60060R 16 HD60060Y 16 HD60090CW-DC 27 HD60095G 52 HD60096PC 52 HD60097PC 52 HD60804RCSD 43 HD60804RSD 43 HD60804WCSD 21 HD60804YCSD 43 HD60804YSD 43 HD60813R 43 HD60813RC 43 HD60813Y 43 HD60813YC 43 HD62006-3WFL 9 HD62006-3WSP 9 HD63000CB 53 HD63003YCSD 50 HD63003YSD 50 HD63015YCSD-2 44 HD63015YCSD-2CB 44 HD63015YCSD-3 44 HD63015YCSD-3CB 44 HD63015YSD-2 44 HD63015YSD-2CB 44 HD63015YSD-3 44 HD63015YSD-3CB 44 HD63018SMDW-B 22 HD63018SMDW-W 22 HD63203YCSD 50 HD63203YSD 50 HD65031YCSD 19 HD65031YSD 19 HD67018R 59 HD67018W 59 HD67018Y 59 HD68018R 59 HD68018W 59 HD68018Y 59 HD70009BSD 26 HD70009GSD 27 HD70009RSD 26 HD70009WSD 26 HD70009YSD 26 HD72006-APAD 53 HD72006-3WFLFM 9 HD72006-3WSPFM 9 HD83019TR 18 HD83031TR 18 HD89009SMDR 59 HD89009SMDW 59 HD89009SMDY 59 HD90009SMDR 59 HD90009SMDW 59 HD90009SMDY 59 HD92109W-3A 56 HD92109W-3B 56 HD92109W-3G 56 HD92109W-3P 56 HD92109W-3R 56 HD92109W-3W 56 HDD405DSP 62 HDD408DSP 62 HDDSPB1 60 HDDSPB2 60 HDDSPB3 60 HDDSPB4 60 HDDSPB5 61 HDDSPB6 61 HDDSPB7 61 HDDSPB8 61 HDF03054 54 HDF03055 54 HDF03056 54 HDF03057 54 HDF03058 55 HDF03083 55 HDF03084 55 HDLC-2307 62 HDLC1-12-2A 62 HDTS06-2S6 51 62 LED DISPLAY SALES AIDS INDEX 63
P.O. Box 82268 Portland, OR 97282 USA Telephone: 503 233 0008 Toll Free: 1 877 238 0008 Fax : 503 233 0009 info@heavydutylighting.com Please visit us online at Distributed by: VER0117A