Truck Body Pricing, Options & Parts Master Edition 2017 DownEaster 120 Old Lisbon RD. PH (207) 729 5101 Topsham, ME 04086 Fax (207) 729 8782 Distributed by: or email us to order: parts@downeastermfg.com PRINTED IN USA PRICES SUBJECT TO CHANGE WITHOUT NOTICE. NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS. Booklet Part # TPB20 17 2/17/2017 Rev A
TABLE OF CONTENTS Page DED DUMP BODY BROCHURE DEDH DUMP BODY BROCHURE DED DUMP BODY PRICING, OPTIONS & PARTS DED REPLACEMENT PARTS (LOW PROFILE ONLY) DEP FLAT BED BROCHURE DEP FLAT BED PRICING, OPTIONS & PARTS IP SERIES, DUMP INSERT BROCHURE IP SERIES, DUMP INSERT PRICING, OPTIONS & PARTS IP140, TAILGATE SPREADER BROCHURE HYDRAULIC PUMPS/CYLINDERS/FITTINGS/HOSES DED REPLACEMENT PARTS (PRE 2016) MATERIAL APPENDIX TARP KIT BROCHURE NOTES 3, 4 5, 6 7 8 9, 10 11 12, 13 14 15 16, 17 18 19 20 21 2 Rev C 2/17/2017
DownEaster BUILT TOUGH, BUILT TO LAST Since 1979 SCISSOR HOIST DUMP BODIES 2015 GM 60" CA 3500 shown Designed with the features you expect. Reliable and rugged scissor hoist, for proven load dumping of the heaviest materials. 10 Gauge construction throughout, with structural channel understructure. Easy release, locking pins for tailgate, top and bottom. Bolt on Sub frame, hoist and body, for ease of installation, transfer or replacement. LED lighting for visibility and less maintenance. 2.5" lower bed height than previous models Shipped fully assembled on hoist, sub frame and painted! Available in 304 Stainless Steel construction, with stainless interlaced understructure. 3 Rev C
SPECIFICATIONS DUMP BODY - SCISSOR HOIST SERIES 2017 SERIES Length Model Fixed Sides Cab to axle (CA) GVW Range Inside Dim. (I.D.) (L x W x H) Mounting length Body Width Cubic Yards (level, + 6", + 6") Hoist capacity Dump Angle Weight (lbs.) 8' DED0888 60" CA GM (pre 2011) 11.5k 13.5K 96" x 78" x 13" 91" to 93" 88" 2.2, 3.3, 4.4 9 ton Class 20 50 1400 9' 3" 10' 6" 11' 3" DED09396 DEDS09396 DED10696 DEDS09396 DED11396 DEDS11396 13" 60" CA GM, FORD, RAM 3500 5500 86.5" CA Isuzu & Chevy Cab Forward 84" CA GM, FORD, RAM 3500 5500 13K 19.5K 14.5K 19.5K 13K 19.5K 111" x 86" x 13" 126" x 96" x 13" 135" x 86" x 13" 106" to 108" 121" to 123" 130" to 132" 96" 2.6, 3.8, 5.1 2.9, 4.3, 5.8 3.2, 4.7, 6.2 8 ton Class 20 10 ton Class 40 9.5 ton Class 40 50 1605 48 1880 48 1950 10' DED1096 DEDS1096 18" 72", 84" CA F 650, International, 19.5K 25K 119.5" x 86" x 18" 117" to 119" 3.9, 5.2, 6.5 10.5 ton Class 40 48 2015 STANDARD FEATURES All models are bolt on installation. Two Year Limited Warranty GENERAL TAILGATE *10 gauge construction throughout. * Formed 10 gauge inner, outer and end panels. *Dirt shedding, sloped design at side plate and tailgate top *1" hardened pins, (1" Stainless) with plasma cut * Double panel side plates equal over 1/4" thickness. latch receiving lock fingers. *Full depth 3/16"rear corner pillars incorporate recessed lighting, * Adjustable 1/4 chain for spreading aggregate keyhole banjo eyes and lower tailgate pin receiver. material & holding gate in down position. *All lighting is LED rubber mounted and NTEA and Federal compliant. *21/2" shorter deck height (9' only) CAB SHIELD * Mounting height of 9.5" chassis to floor (9' only) * Bolt on, 10GA (12GA SS) cab protector / overhang, for * 10" board extension pockets ease of install & future optional / custom overhang. *Self aligning rear latch release for the top gate pins * 12" (1/4 cab) overhang, standard. (9' & 11') *Integrated tarp hooks * Pre punched tarp mounting provisions. * DuPont Imron Elite black oven * Slotted dual windows cured paint w/ epoxy primer OPTIONS FLOOR & UNDERSTRUCTURE * Stainless body construction (excluding DED0888) *4" x 5.7# Channel long sills and 3" channel cross members (9') * 24" Cab Shield (1/2 cab) *6" x 8.2# Channel long sills (10', 10.5' 11') * Tarp assembly, manual or spring loaded. * 3/16" Stainless formed 7" long sills (SS body) * 3/16" floor (on 9' & 10' only) * 3" stainless tubing, interlaced cross members (SS body) *Coal chute, installed, painted or stainless *Two piece 10 gauge floor with 45 degree slopped corners * Backup, running or strobe lights in apron where meets seamless side plate. * Greasable Bronze bearings for underbody release mechanisms Dual action pump, shipped installed One handed, self aligning, locking latch w/ integrated spring retention Distributed by: 120 Old Lisbon RD. Topsham, ME 04086 (207) 729 5101 Fax (207) 729 8782 www.downeastermfg.com Specifications subject to change without notice 4 Rev C
DownEaster BUILT TOUGH, BUILT TO LAST Since 1979 DROP SIDE DUMP BODY 2017 GM 60" CA 3500 shown Designed with the features you expect. Reliable and rugged scissor hoist, for proven load dumping of the heaviest materials. 10 Gauge construction throughout, with interlaced understructure. Easy release, locking pins for tailgate, top and bottom. Bolt on Sub frame, hoist and body, for ease of installation, transfer or replacement. LED lighting for visibility and less maintenance. 2.5" lower bed height than previous models HD 512 scissor hoist, 5" bore x 16" stroke Available in 304 Stainless Steel construction, with stainless interlaced understructure. Stainless steel hinges w/ stainless pins. 5 Rev B
DUMP BODY - DROP SIDE SERIES SPECIFICATIONS 2017 SERIES Length Model Sides Cab to axle (CA) Inside Dimensions (L x W x H) Body Width Cubic Yards (level, + 6", + 6") Hoist capacity Dump Angle Weight (lbs.) 9' 3" DEDH09396 DEDHS09396 13" Hinged 60" CA GM, FORD, RAM (up to 19,500 GVW) 111" x 86" x 13" 96" 2.6, 3.8, 5.1 8 ton Class 20 50 1445 Shipped fully assembled on hoist, sub frame and painted! STANDARD FEATURES All models are bolt on installation. Two Year Limited Warranty GENERAL FLOOR & UNDERSTRUCTURE *10 gauge body & bed. * 3" structural channel interlaced cross members (painted model) *Dirt shedding, sloped design at side plate and tailgate top * 3/16" formed 7" long sills * Double panel, Stainless steel 12 gauge side plates (both models) * 3" stainless tubing, interlaced cross members (SS body) *Dual pin latches per side, for safety and simplicity * Two piece 10 gauge floor *Full depth 3/16"rear corner pillars incorporate recessed lighting, *Bolt on sub frame and scissor hoist. keyhole banjo eyes and lower tailgate pin receiver. * Greasable Bronze bearings for underbody release mechanisms *All lighting is LED rubber mounted and NTEA and Federal compliant. (adjustable front & rear) *21/2" shorter deck height (9' only) * Mounting height of 9.5" chassis to floor (9' only) CAB SHIELD *8" board extension pockets * 12" (1/4 cab) 10GA (12GA SS) cab protector *Self aligning rear latch release for the top gate pins * Slotted dual windows *Integrated tarp hooks * overhang, standard. *DuPont Imron Elite black oven *10 gauge side panels with pre punched tarp mounting provisions. cured paint w/ epoxy primer *Straight overhang for ease of accessory installs TAILGATE OPTIONS *Formed 10 gauge inner, outer and end panels. * Stainless body construction *1" hardened pins, (1" Stainless) with plasma cut *Tarp assembly, manual latch receiving lock fingers. * Coal chute, installed, painted or stainless * Adjustable 1/4 chain for spreading aggregate * Backup, running or strobe lights in apron (painted model) material & holding gate in down position. Dual action pump, shipped installed One handed, self aligning, locking latch w/ integrated spring retention Distributed by: 120 Old Lisbon RD. Topsham, ME 04086 (207) 729 5101 Fax (207) 729 8782 www.downeastermfg.com Specifications subject to change without notice 6 Rev B
DUMP BODY - SCISSOR HOIST SERIES PRICING Part # Side Height DED0888 13" DED09396 13" DED10696 13" DED11396 13" DED1096 18" 2017 SERIES, PAINTED STEEL Description 8' 0" x 88" 2 3 yard DownEaster Dump Body with HD 512, 3200 PSI, 2" shaft, 5" bore, 16" stroke. (class 20) 9' 3" x 96" 2 4 yard DownEaster Dump Body with HD 512, 3200 PSI, 2" shaft, 5" bore, 16" stroke. (class 20) 10' 6" x 96" 3 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) 11' 3" x 96" 3 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) 10' x 96" 4 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) Dcode 04860 04860 05470 05350 05580 Part # Side Height DEDS09396 13" DEDS10696 13" DEDS11396 13" DEDS1096 18" 2017 SERIES, STAINLESS STEEL Description 9' 3" x 96" 2 4 yard DownEaster Dump Body with HD 512, 3200 PSI, 2" shaft, 5" bore, 16" stroke. (class 20) 10' 6" x 96" 3 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) 11' 3" x 96" 3 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) 10' x 96" 4 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) Dcode 07900 08400 08200 08700 Part # Side Height DEDH09396 13" DEDHS09396 13" 2017 SERIES, DROP SIDE Description 9' 3" x 96" 2 4 yard DownEaster PAINTED DROP SIDE Dump Body with HD 512, 3200 PSI, 2" shaft, 5" bore, 16" stroke. (class 20) 9' 3" x 96" 2 4 yard DownEaster STAINLESS DROP SIDE Dump Body with HD 512, 3200 PSI, 2" shaft, 5" bore, 16" stroke. (class 20) Dcode 05890 08680 Note: DUAL ACTING PUMP STANDARD ON ALL SIZES Part # Complete factory assembly Options Description Dcode Complete assembly of body @ factory, wiring, lights, hardware, cab shield. 00120 Tarp 96" Tarp kit, manual for 96" body, not installed 00210 Truck tarp install Installation of truck tarp 00150 DEDP237 Coal Door / Inspection Door, Carbon Steel, 12 3/8" T x 13½" 00225 DED COAL CHUTE Coal chute for center gate, INSTALLED & PAINTED 00500 DEDP238 Coal Door / Inspection Door, STAINLESS Steel, 12 3/8" T x 13½" 00350 DED COAL CHUTE SS Coal chute, STAINLESS, for center gate, INSTALLED 00625 1/2 cab shield (in lieu of 1/4 cab) for 96" body 2 4 yard 00140 1/2 cab shield (in lieu of 1/4 cab) for 96" body 4 5 yard 00140 Cab shield window delete 00050 DEDP290 LED back up / utility light, 6'' oval s/t/t grommet mount.. 00031 SPE564 Window delete Plate hitch Primed only Pump delete LED Strobe light, 6'' oval s/t/t grommet..mount. 00025 Plate Hitch Assembly with 2" receiver tube, D rings, and pintle holes. NOTE: 7 way electrical connector is included. Dupont Imron Expoxy primer finish, no paint deletion of hydrauilc pump and tank for PTO vehicles 00360-00175 00230 7 Rev B 2/17/2017
DUMP BODY PARTS, 2016-17' Part # Parts Description Dcode DEDM300 Cab shield, 12" overhang, 9' & 11' 00281 DEDM310 Cab shield, 24" overhang, 9' & 11' 00354 DEDM312S Cab shield, 12" overhang, STAINLESS, 9' & 11' 00410 DEDM314S Cab shield, 24" overhang, STAINLESS, 9' & 11' 00540 DEDM316 Cab shield, 24" overhang, 10' & 10.5'only 00381 DEDM318S Cab shield, 24" overhang, STAINLESS 10' & 10.5'only 00540 DEDM436 Chassis brackets, x 2 00052 DEDM442S Fuel filler neck bracket, x 1, stainless 00058 DEDM460S Mud flap bracket, Stainless 00058 DEDM522 9' sub frame, no hoist 00448 DEDM524 10' sub frame, no hoist 00468 DEDM604 Upper latch handle and lock, Painted x1 (specify L or R) 00032 DEDM604S Upper latch handle and lock, Stainless x1 (specify L or R) 00047 DEDM620 Latch assembly rear, bolt on style w/ bearings 00167 DEDM621 Latch assembly front, bolt on style w/ bearings 00096 DEDM626 Bent anchor bolt x 1 00022 DEDM640 Prop Rod, 25", round style 00058 DEDP100A 250 Amp MEGA Blade Fuse 00021 DEDP102 Reflector, 2 3/8 round, Red 00004 DEDP210 Adjustable yoke end, zinc, x 1 00007 DEDP217 Cylinder, 5" x 16" stroke 00396 DEDP218 Cylinder, 5.5" x 20" stroke 00427 DEDP222 Reflector, 2 3/8 round, Amber 00004 DEDP265 3/4'' LED marker light, RED, round, w/ grommet.. 00006 DEDP376 Sill plate x 1 00010 DEDP502 Battery cable set, 0/1 Gauge. 00130 DEDT2096 Tailgate, 20" high, for 13" side wall 00468 DEDT2096S Tailgate, 20" high, for 13" side wall STAINLESS 00562 DEDT2496 Tailgate, 24" high, for 17" side wall 00541 HD 512B Hoist, 9' body, 5" x 16" stroke, no cylinder 00510 HD 515B Hoist, 10' & 11' body, 5.5" x 20" stroke, no cylinder 00697 HP112 Dump hinge, weld on 00032 HP116 Dump hinge, Bolt on, stainless bodies 00037 TPL169 Rubber bumper, 1 1/2" OD 00005 To order: Call 207 729 5101 Fax 207 729 8782 email: parts@downeastermfg.com 8 Rev A
DownEaster BUILT TOUGH, BUILT TO LAST Since 1979 PLATFORM BODIES 2017 Designed with the features you expect. LED, PC rated, rubber mounted lighting Tapered bulk head w/ light bar We use: DuPont Imron Elite LED Lighting Member of: 9
PLATFORM BODY - TREAD DECK SERIES SPECIFICATIONS BOX DELETE MODELS Length Model Sill Height Cab to axle (CA) Bed Dimensions (L x W ) Body Width OA Install Weight (lbs.) 7' 2" DEP0784 4" for 7', Box delete, SINGLE wheel only. 86" x 80" 84" 685 8' 6" DEP08684 4" for 8', 56" CA Box delete, SINGLE wheel only. 98" x 80" 84" 735 8' 6" DEP08696 DEPS08696 4" for 8', 56" CA Box delete, DUAL wheel only 102" x 92" 96" 835 SPECIFICATIONS CAB CHASSIS MODELS 9' 6" DEP09696 DEPS09696 6" 60" CA GM 3500 60" CA Dodge 3500 5500 60" CA Ford 350 550 114" x 92" 96" 925 12' DEP1296 DEPS1296 6" 84" CA GM 3500 84" CA Ram / Sterling 3500 5500 84" CA Ford 350 550 143.5" x 92" 96" 1070 STANDARD FEATURES GENERAL BULK HEAD *11 gauge (1/8") Tread plate deck construction. * Welded on, 14 gauge cab protector, with slotted window *All lighting is LED rubber mounted and NTEA and Federal compliant. * External stake pockets w/ rub rail. and rubber mounted LED lighting. *Provisions for bolt on side extensions for rack sides. *DuPont Imron Elite black oven cured paint w/ epoxy primer *Two Year Limited Warranty OPTIONS * Scissor hoist conversion ( cab chassis only) FLOOR & UNDERSTRUCTURE *Bolt on bulk head side extensions for rack sides *4" x 5.7# Channel long sills and 3" channel cross members (box delete) * Goose neck door (specify CA) *6" x 8.2# Channel long sills and 3" channel cross members (Cab chassis) * Goose neck hitch plate (34" Chassis only) Distributed by: 120 Old Lisbon RD. Topsham, ME 04086 (207) 729 5101 Fax (207) 729 878 www.downeastermfg.com Specifications subject to change without notice 10
FLATBED - TREAD DECK SERIES PRICING 2017 Dcode Part # Description Painted Black Box Delete Models DEP0784 7' 2" x 84", DownEaster diamond plate flatbed, tapered headboard, LED lighting w/ window, 4" sills. 01800 DEP08684 8' 6" x 84", DownEaster diamond plate flatbed, tapered headboard, LED lighting w/ window, 4" sills. 01800 DEP08696 8' 6" x 96", DownEaster diamond plate flatbed, tapered headboard, LED lighting w/ window, 4" sills. 01890 DEPS08696 8' 6" x 96", DownEaster STAINLESS STEEL flatbed, tapered headboard, LED lighting w/ window, 4" sills. 02870 Chassis Cab Models DEP09696 9' 6" x 96", DownEaster diamond plate flatbed, tapered headboard, LED lighting w/ window, 6" sills. 01990 DEPS09696 9' 6" x 96", DownEaster STAINLESS STEEL flatbed, tapered headboard, LED lighting w/ window, 6" sills. 02865 DEP1296 12' x 96", DownEaster diamond plate flatbed, tapered headboard, LED lighting w/ window, 6" sills. 02100 DEPS1296 12' x 96", DownEaster STAINLESS STEEL flatbed, tapered headboard, LED lighting w/ window, 6" sills. 03160 Dump Hoist options HC 124B Hoist conversion, HC 124B, 4" x 16" stroke, includes pump, brackets, safety prop, & weld on dump hinge. ( for 9' 12' flatbed with 5" to 6" sills) 01550 HC 124B PD Hoist conversion, same as above, w/ POWER DOWN 01675 HP108 Rear Dump hinge assembly, w/ upper hinge pads and pivot pins (weld on only, requires frame modification) 00193 Part # Option Description Dcode 4" Sills (60 or 84) 4" sills in lieu of 6" sills on 60" & 84" CA models 00052 DEP200 Headboard side extensions, for square bulkhead. (pair) 00160 Window delete Window deletion, solid front panel 00052 Goose neck door Gooseneck door only, w/ hinges ( replacement ) 00105 Goose neck door installed 1 Gooseneck Plate Hitch Body Options Gooseneck door, installed during production 00213 Gooseneck hitch plate only, with 2 5/16 ball, d rings 00345 Gooseneck Plate Hitch Installed Gooseneck hitch plate installed, with 2 5/16 ball, d rings, and 7 way plug includes gooseneck door installation (installed 3" in front of axle), 00690 2/17/2017 To order: Call 207 729 5101 Fax 207 729 8782 email: parts@downeastermfg.com 11 Rev B
DownEaster BUILT TOUGH, BUILT TO LAST Since 1979 TRUCK DUMP INSERT Designed with the features you expect. 8', 6', Painted steel & Stainless steel models. Dump angle of 47 degrees. Compact, yet rugged scissor hoist with a 6,000 lb. lift capacity We use: Member of: DuPont Imron Elite Hydraulic pumps Hydraulic Cylinders Specifications subject to change without notice DO NOT EXCEED VEHICLE GVW Rev. C 041014
DUMP INSERT - SCISSOR HOIST SERIES SPECIFICATIONS $ $ Model# IP 100 / 100S IP 110 / 110S GWR: # Weight: Payload capacity: Volume: (level) Floor size @ bottom WxL: Bed size @ top WxL: Deck height: Side height: Stake pockets: Cylinder bore x length: 742 lbs 5,258 lbs. 2.0 Cubic Yards 48.5" x 96" 63.4" x 101.7" 6,000 lbs. 660 lbs. 5,340 lbs. 1.6 Cubic Yards 48.5" x 76" 63.4" x 81.7" 8" 18" 6 3.5" x 10" Hydraulic pump: Dual action (power up / power down down) STANDARD FEATURES *12 gauge floor / 14 gauge side plates OPTIONS * Stainless steel tub on both models. *Two way tailgate (top/bottom hinged) w/ (steel sub frame) * Electric over hydraulic pump w/ * 1/4 Cab protector w/ slotted window 10' pendant control cord. & pre punched tarp mounting holes. *Spring loaded tailgate bottom *Mesh roller tarp, manual release pins. * Adjustable 3/16 chain for spreading aggregate material & holding gate in down position. *Compact scissor hoist * Replacement Tailgate auger spreader w/ 3.5" diameter cylinder. w/ electric drive. *47 degree dump angle (double acting pump required) * Internal stake pockets * DuPont Imron Elite black oven cured paint w/ epoxy primer *Two Year Limited Warranty 8' Steel painted model shown Stainless steel tub & Tarp optional Stainless Steel tailgate replacement auger spreader, w/ 1/2" HP individual drive motors (IP 140) Distributed by: 120 Old Lisbon RD. Topsham, ME 04086 (207) 729 5101 Fax (207) 729 8782 www.downeastermfg.com Specifications subject to change without notice DO NOT EXCEED VEHICLE GVW Rev. C 041014
IP SERIES OPTIONS & PRICING IP100D IP110D DESCRIPTION DownEaster dump insert, 8' bed, painted carbon steel, w/ electric hydraulic scissor hoist, power up/ power down, two way tailgate. DownEaster dump insert, 6.5' bed, painted carbon steel, w/ electric hydraulic scissor hoist, power up/ power down, two way tailgate. Dcode 02025 IP100SD IP110SD DownEaster dump insert, 8' bed, STANLESS STEEL, w/ electric hydraulic scissor hoist, power up/ power down, two way tailgate. DownEaster dump insert, 6.5' bed, STANLESS STEEL, w/ electric hydraulic scissor hoist, power up/ power down, two way tailgate. (Stainless steel dump insert pricing subject to change without notice, due to sur charges ) 02990 PART # OPTION DESCRIPTION Dcode Cab Shields IP120 IP120S Cab shield, 1/4 overhang, bolt on, painted steel, for IP series dump insert, dual slotted window, roller tarp provisions. (hardware included) Cab shield, 1/4 overhang, bolt on, STAINLESS steel, for IP series dump insert, dual slotted window, roller tarp provisions. (hardware included) 00196 00295 Tarp Tarp 6312 Tarp Roller Kit, for dump insert, includes mesh tarp and all mounting hardware. 00210 TPU106 Replacement tarp, mesh only 00083 IP600 Dodge short bed adaptor mounting kit, for 2003' to 2009' 00059 TKA105 Install kit, complete with harness 00211 IP140 DownEaster Tailgate replacement Spreader, stainless, dual flight, center feed auger, dual electric motors, 1/2 HP drive, with removable spinner assembly. 02525 Tailgate Spreader see next page for brochure IP140 V DownEaster Tailgate replacement Spreader, stainless, dual flight, center feed auger, dual electric motors w/ VARIABLE CONTROLS, 1/2 HP drive, with removable spinner assembly. 02850 IP150 Dump body adaptor kit, for IP140 tailgate spreader. fits 2 4 yard dump bodies between 75' 88' 00575 Replacement parts TA172 Scissor hoist assembly, IP series, Upper frame w/ welded cross rod, and bolt on lower link arms. (no cylinder ) 00560 See Replacement parts hydraulics page for pump parts. TA272 Lower links only, (pair) 00055 TPH138 Cylinder Hydraulic, 3.5 x 9.5 x 1.75 rod dia 00250 0.704 Seal rebuild kit, for cylinder 00019 TPL126 Tailgate Chain,3/16" zinc, 40" long 00010 TPM119 Spring Latch, 5/8" with plain tube 00008 IP510 Bolt down, for truck frame (each) 00013 HWF607 Hardware bolt kit, for hold down above (set of 4) 00009 TA176 Replacement tailgate, for Painted models, (2006 & up) 00220 TA177 Replacement tailgate, for STAINLESS models, (2006 & up) 00298 TA188 3/4" yoke pin w/ welded ring, zinc. 00010 To order: Call 207 729 5101 Fax 207 729 8782 email: parts@downeastermfg.com 14 Rev D
SPREADER - IP140 TAILGATE SERIES Fits multiple brands of Dump inserts Dump Body adapter kit SPECIFICATIONS $ Model# IP140 Construction: 12GA Stainless steel hopper Size : 60" W x 16" H x 10" D STANDARD FEATURES * 8' to '20' spread pattern * Precise flow rate adjustments * 1/2 HP electric drive, thru gear 60:1 reduction * Center feed auger * Integrated lifting hook * Fits multiple brands w/ adaptor kits * Self aligning bearings * Mixing tine for material agitation * * * * OPTIONS Removable spinner basket Rotating spinner assembly remains level Stainless steel drive motor 200# vibrator * Variable speed control for spinner (recommended) * Mounting kit for 2 4 yard dump bodies Distributed by: 120 Old Lisbon RD. Topsham, ME 04086 (207) 729 5101 Fax (207) 729 8782 www.downeastermfg.com Specifications subject to change without notice 15
HYDRAULIC PUMPS AND CYLINDERS PART # DESCRIPTION Dcode TPE177 Solenoid, for Trailer Hydraulic Pumps 00035 TPH108A TPH100 TPH107 TPH107A TPH108 TPH131 PUMPS & PARTS Motor, for SPX / Stone hydraulic pump ( note spline or slotted) KMDI Motor, for Fenner hydraulic pumps, single or double acting, ( note spline or slotted) Hydraulic Pump, Power up Gravity down (IP INSERTS) (1 1/2 gal tank), includes controller (3 wire) Hydraulic Pump, Power up Gravity down (DUMP BODY) (2 1/2 gal tank), includes controller (3 wire) Hydraulic Pump, Power up Power down 1 1/2 gal tank includes controller (4 wire) Magnetic Valve, 10v coil, for hydraulic pump with power down or gravity down TPH132 Valve Cartridge Gravity Down 00090 TPH133 Valve Cartridge Power Down 00115 DEDP206B Hydraulic Tank, for Fenner Pumps 1 1/2 gallon 00109.226 Hydraulic Pump Tank, 2.5 gallon 00115.232 Replacement cap, for trailer & dump hydraulic tanks 00015.228 O Ring, for Hydraulic Pump 00020.782 Controller Quick disconnect, gravity down single action 00016.581 Horizontal tank plumbing/ Distribution kit for HC5 (SPX) 00035 TPH157 Dist flow control kit (1/2 gal/minute) (KFC2) 00030 TPH158 Dist flow control kit ) (1 gal/minute ) (KFC4) 00030 00160 00185 00325 00325 00350 00050 Hoses TPH186 TPH187 Hydraulic hose assembly 3/8'' hose..26.5 length (TOTAL LENGTH 29'')..dump bodies (8 11) Hydraulic hose assembly 3/8'' hose..45 length (TOTAL LENGTH 47.5)..DUMP BODY Dual Action only TPH193 Hydraulic hose, 1/4'', 43'' length, IP110 00025 TPH194 Hydraulic hose, 1/4'', 56'' length, IP110 DUAL ACTION 00025 TPH195 Hydraulic hose, 1/4'', 60'' length, IP100 00030 TPH196 Hydraulic hose, 1/4'', 72'' length, IP100 DUAL ACTION 00030 00030 00030 To order: Call 207 729 5101 Fax 207 729 8782 email: parts@downeastermfg.com 16 Rev A
HYDRAULIC PUMP REFERENCES SPX RED GREEN WHITE MONARCH / BUCHER BLACK Pendants PART # DESCRIPTION Dcode TPE153 TPE169 Remote control (pendant), power up/ gravity down) (10'cord) (3 wires) SPX / Bucher Remote control (pendant), power up/ power down) (10'cord) (4 wires) SPX / Bucher 00035 00050 Fittings PART # DESCRIPTION Dcode TPH120 Breather cylinder, 1/2" NPT port 00006 TPH120A Breather cylinder, 1/4" NPT 00003 TPH147 2501 6 6 JIC, elbow to pipe 00006 TPH155 Elbow fitting, 3/8 male x 3/8 male 00006 TPH156 Extra long elbow fitting, 3/8 male x 1/4 male 00013 TPH159 Elbow, 3/4" X 3/8" JIC 00009 TPH160 ORING BREATHER VENT 8 SAE 00015 TPH161 3/8" Male o ring, to 3/8" female pipe 00005 TPE117 Short pump elbow (90), 3/8"JIC male x 1/4"NPT male 00007 To order: Call 207 729 5101 Fax 207 729 8782 email: parts@downeastermfg.com 17 Rev A
ROLLER TARP KIT - DUMP PRODUCTS Tarp kits available for all DownEaster Dump Trailers & Dump Bodies * Heavy duty mesh covering * Spring loaded break away crank handle * 1 1/2" diameter Aluminum extruded tarp axle * Steel powder coated mounting brackets and sealed bearings * Direct mount to DownEaster brand units, with no additional brackets required. * Minimal install time. * Most States REQUIRE loads to be covered by law. * Universal locating brackets available for custom mounting Distributed by: 120 Old Lisbon RD. Topsham, ME 04086 (207) 729 5101 Fax (207) 729 8782 www.downeastermfg.com Specifications subject to change without notice 18 Rev C
DUMP BODY PARTS, PRE 2016 DEP209/210 DEDM612/613 DEDM616/617 DED Part # Parts Description Dcode DEDM600L / DEDM600R Cam latch for gate, (1) SPECIFY LEFT OR RIGHT, does not include cover 00072 SPG110 DEDM602 DEDT1888 DEDT1896 DEDT2496 DEDM428 DEDM0922 Handle grip, gate arm, rubber with finger grips S.S. latch cover, formed for cam latch. Tailgate for 88" wide body, 2 3 yard, 12" sides (tailgate is 18" high) Tailgate for 96" wide body, 2 3 yard, 12" sides (tailgate is 18" high) Tailgate for 96" wide body, 3 4 yard, 18" sides (tailgate is 24" high) Mud flap brackets, bolt on, includes hardware kit. Filler neck support, bolt on, for scissor hoist bodies only. 00005 00014 00470 00470 00550 00035 00035 DEDM432 DEDM550 DEDM405 DEDM408 DEDM406 DEDM410 DEDM407 DEDM409 DEDP203 DEDM612 / DEDM613 Sub frame Chassis brackets, Pair (2) includes: painted steel 3/8" HR bracket(s), Prop rod assembly, scissor hoist body, painted black Cab shield, 1/4 (12") overhang, 48.5" tall, bolt on, for scissor hoist dump body, (hardware NOT included ) (2 3 yard, 88" wide) Cab shield, 1/4 (12") overhang, 48.5" & 54.5" tall, bolt on, for scissor hoist dump body, (hardware NOT included ) (2 3 yard) 96" wide Cab shield, 1/4 (12") overhang, 48.5" tall, bolt on, for scissor hoist dump body, (hardware NOT included ) (3 4 yard, 96" wide) Cab shield, 1/4 (12") overhang, 61" tall, bolt on, for scissor hoist dump body, (hardware NOT included ) (GM4500) Cab shield, 1/2 (24") overhang, 48.5" tall, for 96" body 2 3 yard Cab shield, 1/2 (24") overhang, 48.5" tall, for 96" body 3 4 yard Cab shield hardware kit Latch handle assembly, front (handle, pipe, bushings) specify 88" or 96" body 00050 00058 00285 00295 00255 00330 00340 00380 00010 00215 DEDM616 / DEDM617 Under body latch assembly, REAR, specify 88" or 96" body 00225 DEDM620 Lower tailgate latch receiver and locking arm assembly, 3/8" HR steel, bare, welded with clevis pin. SPECIFY LEFT OR RIGHT. 00033 DEDP213 Wire Harness for 2 3 yard DownEaster dump body (2 components) 00115 DEDM520 2 3 yard dump body sub frame, 72" to hinge, for 9' & 9' 3" bodies 00435 DEDM530 2 3 yard dump body sub frame, 72" to hinge, for 10' body only. 00435 DEDM540 3 5 yard dump body sub frame, 84" to hinge, for 10' & 11' body only. 00450 HD 512 Hoist only HD 512 hoist for 2 3 yard dump bodies, requires 5" cylinder x 16" stroke cylinder, not included, painted black, includes lift shafts & prop rod 00510 HD 515 Hoist only HD 515 hoist for 2 3 yard dump bodies, requires 5.5" cylinder x 20" stroke cylinder not included, painted black, includes lift shafts & prop rod. 00690 HD 512SUB HD 512 hoist conversion kit, 5' cylinder x 16' stroke, w/ sub frame & pump 01770 HD 515SUB HD 515 hoist conversion kit, 5.5' cylinder x 20' stroke, w/ sub frame & pump 01980 DEDP217 Cylinder, Hydraulic 5" x 16" x 2" rod dia., for HD 512 hoist 00400 DEDP218 Cylinder, Hydraulic, 5.5" x 20"x 2.25 rod dia., for HD 515 hoist 00430 DEDP209 Bent anchor bolt w/1/2 13 threads one end for clevis linkage assembly 00022 DEDP210 Adjustable yoke end, 1/2 13 female thread, for 1/2" pin 00006 DEDP100A MEGA Blade Fuse, 250 Amp 00020 To order: Call 207 729 5101 Fax 207 729 8782 email: parts@downeastermfg.com 19 Rev A
APPENDIX 20
NOTES To order: Call 207 729 5101 Fax 207 729 8782 email: parts@downeastermfg.com 21
www.downeastermfg.com Coastal Metal Fab was founded in 1979 as a custom metal fabrication shop. Starting in 1993, we began designing and manufacturing salt & sand spreaders, under the DownEaster brand name. Since that time, we have grown steadily and become one of the leading brands in snow and ice control, in the U.S. Our 30,000 sq. ft. facility can accommodate the high output of products required to supply our dealers, all over North America and beyond. In 2000, we began manufacturing trailers & truck bodies; and today still take pride in the " Built in Maine, built to last" craftsmanship. DownEaster 120 Old Lisbon RD. PH (207) 729 5101 Topsham, ME 04086 Fax (207) 729 8782 or email us to order: parts@downeastermfg.com Distributed by: