BDP. BDP Bi-Directional Parking System PROFESSIONAL PARKING SOLUTION PROVIDER! WE PLAN, DESIGN, MANUFACTURE AND INSTALL... QINGDAO MUTRADE CO., LTD.

Similar documents
BDP Puzzle Lift Bi-Directional Parking System

Hydro-Park High-end Four Post Parking Lift PROFESSIONAL PARKING SOLUTION PROVIDER!

WE PLAN, DESIGN, MANUFACTURE AND INSTALL... PROFESSIONAL PARKING SOLUTION PROVIDER! MECHANICAL GARAGE QINGDAO MUTRADE CO., LTD.

Hydro-Park Hydro-Park 1127 High-end Two Post Parking Lift PROFESSIONAL PARKING SOLUTION PROVIDER! WE PLAN, DESIGN, MANUFACTURE AND INSTALL...

1000-LB. MOTORCYCLE LIFT TABLE OWNER S MANUAL

PVI 60KW, PVI 82KW, PVI 95KW

Quotation. With in 45 days after receipt the payment 30%TT as deposit, and 70%TT balance before shipping Picture

OPERATIONS MANUAL LEVER CHAIN HOIST

PVI 1800/PVI Residential/Commercial Grid-Tied Photovoltaic Inverter WARRANTY MANUAL. Subject to Change REV , Solectria Renewables

Read this entire manual before operation begins.

WARRANTY POLICY. Grid-Tied Photovoltaic Inverters. Revision D. 2014, Solectria Renewables, LLC DOCIN

ABRASIVE BLAST CABINET

VESTIL MANUFACTURING CORP. OPERATION & SERVICE MANUAL PORTABLE DRUM JACK (DRUM-55-S) 2999 NORTH WAYNE STREET, P.O. BOX 507, ANGOLA, IN 46703

DRAIN WATER TEMPERING KIT

Electric Chainsaw Sharpener With Bar Mount

SFP-250 and SFP-400. Installation Instructions. An Altra Industrial Motion Company P-231-WE

(KERNEL) SAND BLAST CABINET ( 220L ) ASSEMBLY & OPERATION INSTRUCTION

ERD Electrically Released Brakes

INSTALLATION INSTRUCTIONS SINGLE HORIZONTAL ACCESS DOOR PANTRY INSERT MANUAL

ALITA LINEAR AIR PUMP OPERATION & MAINTENANCE MANUAL. AL- Model Number Date Code / Serial Number Date of Purchase

Raydot LLC 24 Actuator (115 VOLT)

INSTALLATION, OPERATION & MAINTENANCE MANUAL

Heavy Duty Engine Cranes

3-TON DOUBLE LOCKING JACK STANDS OWNER S MANUAL

StormPro BA Series Sump Pump

Operations and Parts Manual

Owner s (Operator s) Manual & Safety Instructions Manually Lever Operated Chain Hoist Model LX1B

6-TON DOUBLE LOCKING JACK STANDS OWNER S MANUAL

Sanitary Yard Hydrant Installation Instructions

24 Linear Actuator 115 Volts A.C. (Cat. # C430A)

FALKEN TIRE LIMITED WARRANTY

Read this entire manual before operation begins.

DUAL WIDEBAND AIR/FUEL RATIO GAUGE Product Numbers: GS-W702W_Dual, GS-C702W_Dual, GS-T702W_Dual

Utility Jack Model Number: HD HD HD

INSTALLATION, OPERATION, & MAINTENANCE MANUAL

OPERATION & SERVICE MANUAL DRUM (MANUAL DRUM LIFTER)

Customer Support

Preassembled Clutch/Brake Module

StormPro BCV400 Sewage Ejector Pump

DISTRIBUTED BY TULSA CHAIN.COM, LLC.

Compressor Clutch Replacement Procedure

TABLE OF CONTENTS. Warranty Disclaimers Delivery Checklist After Sale Checklist Safety Set Up... 8

JD-2 TOLL FREE UG August /2011

Before equipment use, please read this operation manual carefully. Serial Number: Date Purchased:

Low Profile Service Jack Jack Stand Combo

TERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR)

Sanitary Roof Hydrant Installation Instructions

SOLAR DASH CHARGING SYSTEM USER GUIDE

DWS404 DWS524 DWS654 DWS684 DWS694. DWS SERIES INSTALLATION/OWNER'S MANUAL Car Audio Speakers

Installation and Maintenance Manual

USER MANUAL ASSEMBLY, MAINTENANCE, &

MINISTICK TM UV Germicidal Ultraviolet Light

The RICON S-Series Personal Use Wheelchair Lift provides wheelchair access to personal

INSTALLATION, OPERATION & MAINTENANCE MANUAL

HIGH DUMP ROLL-OUT BUCKET

Operating Instructions & Parts Manual

HWP2/HWP3/HWP4 Hydraulic Submersible Pumps

Mini Jacks Instruction Manual

OPERATOR S MANUAL GEARED BEAM TROLLEY 1 TON THROUGH 30 TON QUICK ADJUST TROLLEY 1 TON THROUGH 10 TON

182-LED Solar-Powered Motion Security Light. Owner s Manual

Straight-Bore Clutch LSCC-32, 44, 54

Electromagnetic Particle Clutches and Brakes Models: POC, PHC-R, PMC-A3, POB, PRB and PTB-BL3 P Performance Manual

Vertical Stacking System for both Floor and Roof Lines. SQ-1 INTELLIGENT STACKERS. Operators Manual

Portable Electric/Gas Compressor Operating Instructions

Model T2642 Wall Mount. Television Wall Mount with Tilt Option


Operating Instructions & Parts Manual

1000-LB. ENGINE STAND

Air Curtain. Installation, Operating and Maintenance Instructions

Electromagnetic Particle Brakes Model: PRB-H

Low Profile Service Jack

Installation Instructions

This Manual Provides Installation and Operation Instructions for the following models:

Reach ins, Freeezers & Refrigerators Installation & Operation Manual

Hydraulic Transmission Jacks

Safety Sentry Electronic Breakaway Switch

Ride Rite Warranty Evaluation Guide

USER S MANUAL FOR F & Q. Submersible Sewage Pumps

GLO-502/530 (RIM CLAMP TIRE CHANGER)

24 VOLT AUTOMATIC BATTERY CHARGER PART NO

tiltaway Bike Carrier Assembly Instructions

1000-lb Hydraulic Truck Crane

USER MANUAL ASSEMBLY, MAINTENANCE, &

READ AND SAVE THESE INSTRUCTIONS. High Velocity Restaurant-Duty Utility Set Belt Driven for Roof Mounting

Operator s Manual. Nitro 1000 Nitro 1000X. Nitro 750 Nitro 750X. September REV0

American Crescent Elevator's Lula Lift

TK TRACK LED SCOREBOARD S.O INSTRUCTION MANUAL REVISION DATE: PART#:

Operating Instructions & Parts Manual. Air/Manual Hydraulic Bottle Jacks

INSTRUCTION MANUAL & PARTS DUST COLLECTOR. DCM 200 for MRS 200. The Reference in Surface Treatment

2000-LB. ENGINE STAND

Smith & Hawken Propane Tank Cover dpci # stock # ZAZ15200T

Hydraulic Truck Jack

Model AS-RC3260 TV Cart. Rolling Cart for Audio Mount System & Flat Panel TVs

AT Clutch Major Service Sizes 25, 55, 115

INSTALLATION/OWNER'S MANUAL DP " Woofer in Enclosure

Models PR-12F PR-12C PR-15C SURFACE MOUNTED TWO-POST LIFTS INSTALLATION AND OPERATION MANUAL

User s Manual and Operating Instructions

CBC-802 Plug-In Clutch/Brake Control with Solid State Switching

HE1U 1248 BMS High Efficiency 1U AC to DC Power Supply Owners Guide SPECIFICATIONS

Model AS-FM64 Wall Mount. Full Motion Television Wall Mount

Transcription:

BDP BDP Bi-Directional Parking System PROFESSIONAL PARKING SOLUTION PROVIDER! WE PLAN, DESIGN, MANUFACTURE AND INSTALL... QINGDAO MUTRADE CO., LTD.

BDP Bi-Directional Parking System Introduction BDP Series is a kind of automatic parking equipment. It is suitable for both commercial and residential parking purposes. It moves vertically & horizontally with the platform to park & retrieve car freely. BDP series of product can be combined together with MUTRADE PFP series of product to increase parking spaces. It is driven by hydraulic. h1 h2 -Commercial grade design -Galvanized platform with wave plate for better parking -15 levels above ground for all sedan maximum or 5 levels above ground for all SUV maximum -Can be mixed with 3 levels underground -Galvanized platform with wave plate for better parking -Hydraulic cylinder with steel rope drive -Fast lifting and descending speed -Patented Hydraulic variable frequency speed control technology to smoothly approaching ground -Central hydraulic power pack and control panel, with PLC control system inside -Code, IC Card and manual operation available -2000kg capacity for sedan system, and 2500kg capacity for SUV system -Patented anti-falling frame protection -Hydraulic overloading protection BDP-2 BDP-5 BDP-15 h1 1650(mm) 1800(mm) 1800(mm) h3 h2 h3 2500(mm) 2500(mm) 2500(mm) 5700(mm) 6500(mm) 7400(mm) Data Sheet BDP 03 2014 QingDao Mutrade Co,.Ltd. 1 2 5 1 3 4 7 8 6 1 Wire ropes 2 Wire rope pulley 3 Cylinder 4 Platform 5 Sliding rail 6 Post 7 Stringer 8 Beam Qingdao Mutrade Co., Ltd. www.qdmutrade.com Page 1 of 9

Advantages 1.Speed Hydraulic system is 2-3 times faster than the motor type, for the puzzle system more than 4 floors high, the speed different is significant. 2. Smooth Hydraulic system runs much smoother than motor type. 3. Higher Floor With our new technology, we could build puzzle system 15 floors high over the ground and 3 floor deep under the ground. 4. Flexible Parking Solutions Mutrade BDP system could be placed from 3 cars wide, up to 15 floors high. Combined with PFPP series, Mutrade could provide 15 levels above ground and 3 levels underground integrate parking solutions. 5. Energy Saving With hydraulic system, it doesn't consume any electricity when the platform come down to the ground level, it saves half energy cost. 6. Low And Fast Maintenance Instead of changing motors, for hydraulic system, you usually change cylinder seals. 7. Better Finishing Our systems come with zinc spray finishing for anti-rust, so you don't have to spend more money on that. 8. Lower Cost On Equipment With hydraulic tower system, the only similar product is auto tower system with is 2 times more expensive, it is easier for you to convince your investors and get your investment back faster. 9. Less noise The only hydraulic pump, supporting around 30 parking spaces in a system, could be placed underground to eliminate noise from motor. 10. Experience We have experience of building big projects more than 1, 000 parking lots and we install every year more than 30, 000 spaces all over the world. We send out mechanical & electric engineer to provide onsite instruction services. Safety Features 1 2 6 7 8 12 11 10 9 3 4 5 13 1. Photoelectric detection device for car over height and accidentally entrance of the people and cars. 2. Fixed style anti-falling frame device 3. Sound and light warning device 4. Electromagnetic style anti-falling device 5. Safety warning plate 6. Oil cylinder top limit switch device 7. Car blocking device on platform 8. Phase order protection device 9. Limit switch device 10.Sudden stop device 11.Grounding protection device of over currency,over loading, over or under voltage. 12.Lifting and sliding combined locking device 13.Hydraulic protection device Qingdao Mutrade Co., Ltd. www.qdmutrade.com Page 2 of 9

Specifications Model Levels Available Vehicle Size Drive mode Lifting capacity Hydraulic pump power Lifting speed Sliding speed Control Operation Finishing BDP Series 2 5 15 5000mm x 1850mm x 1550mm (LxWxH) *can be customized to fit for SUV Hydraulic Cylinder + Steel Cable 2000kg *can be customized to fit for SUV 4Kw 11Kw 15Kw 8-12m/min 15-18m/min 22-28m/min 7.5m/min Omron PLC system Button, IC cards, or manual, with LED display Sand blasting, Zinc spray, then Surface painting for protection Operation and Control There are two ways to operate the lift: Manual by button: enter the Num. of parking space and RUN IC card: Per space is equipped with a specific IC card. Swipe the card on the control panel to park or retrieve your own car. The system is controlled by PLC system. Component is mainly from OMRON or Schneider. It can control several units and park or retrieve cars automatically. Container Loading Model BDP Series Container Loading 17 parking spaces/40ft Open Top Container Qingdao Mutrade Co., Ltd. www.qdmutrade.com Page 3 of 9

QINGDAO MUTRADE CO., LTD. Surface Treatment Sandblast Zinc Spray Paint Spray Drawing BDP-2 Qingdao Mutrade Co., Ltd. www.qdmutrade.com Page 4 of 9

Drawing BDP-5 QINGDAO MUTRADE CO., LTD. BDP-15 QINGDAO MUTRADE CO., LTD. Qingdao Mutrade Co., Ltd. www.qdmutrade.com Page 5 of 9

Combination with PFPP BDP-1+2 BDP-3+5 Maintenance Maintenance should be according to the working frequency of the parking equipment. 1 Daily maintenance and check: The user or operator should responses the daily maintenance and check. The platform and parking ground should be kept clean and clear; Clear the surface of the moving parts; If there is any abnormal noise, please inform the maintainer; 2 Regular maintenance and check: Professional maintainer should do regular maintenance and check, and details as per the table below. According to the operation principle of our parking system, the periodical maintenance should be fulfilled as per the following four types: A.Monthly inspection and maintenance It should be done every two weeks after project starts to operate within the first three months. The equipment and safety devices should be clean, lubricated adjusted inspected. Especially, please pay more attention on the working status of main safety devices, careful inspection is necessary and please fix any problem found out in the earliest time. Do inspection on every lubrication parts, and lubricate it if needed. B. Quarterly inspection and maintenance It should be done every three months after first moths end. All the transmission parts (steel cables, limit switches, motor in power pack, pulleys, guiding rails, etc.), safety devices and electrical control system should be inspected completely, and do necessary adjusting or fixing work if needed. C. Yearly inspection and maintenance A technical inspection of whole equipment (including earth connection and withstand voltage of electrical parts, etc.) should be done every year, and customer need make estimation on working status of equipment and annual maintenance plan, fix and replace the worn parts. D. Adjusting test The adjusting test with loading should be done every two years. The equipment could start to operate only after careful inspection on whole system if there is long time stop or any earthquake, fire happening. Qingdao Mutrade Co., Ltd. www.qdmutrade.com Page 6 of 9

Trouble shooting Malfunction phenomenon The whole equipment can t work The noise of oil pump is too large Unsteady operation of the loading board Inaccurate stop position of the loading board Slope of the loading board The loading board can t lift up Reason caused 1. Unusual electricity supply, wrong voltage or wrong phase order. 2. The photoelectric checking device is covered or blocked. 3. Cross transfer doesn t work. The up terminal stopping switch is not in the position;falling doesn t work. The cross transfer is not in the regulated position. 1. The oil collecting pipe is not sealed tightly with air in. 2. The hydraulic pressure oil is not enough in the oil tank. 3. The filter surface is blocked by dusts. 1. The air enter into the oil cylinders causes shaking of the cylinders. 2. Improper adjustment of the stabling steel rope causes severe attrition. 1. The installation position of the jointing point of the loading board space switch is not correct. 2.The computer controlled time is not in accordance with the car case going time Improper adjustment of the stability steel rope. 1. The oil pump doesn t work. 2. The lifting steel rope is broken. 3.The oil pump pressure is not enough 4. The pressure limit valve doesn t work or the pressure is adjusted too low. 5. The electromagnetism valve doesn t work. 6. Other reasons. Eliminated methods 1. Check the electricity supply and adjust to a formal status. 2. Remove the obstacles. 3. Find out the unreached terminal stopping position. Adjust it to the regulated position manually. 1. Seal the oil entrance pipes. 2. Fill in the oil to the level above the oil standard line. 3. Clear the filter. 1. Find out and remove the malfunctions by air entered. Remove the air releasing bolt of oil cylinder to release the air 2. Adjust the stability steel rope. 1. Adjust the journey switch position. 2. Change the lifting speed through adjusting the flow amount of the car case. Adjust the stability steel rope 1.Check if the electric motor works formally and if the coupling is damaged. 2. Change the lifting steel rope. 3. Check the oil pump bearing and check if the sealing surface clearance is too large, then repair them. 4. Check the pressure limit valve and adjust the controlling pressure. 5. Check the direction changing valve. 6. Confirm the loading weight of the car case is not more than 2 ton. Qingdao Mutrade Co., Ltd. www.qdmutrade.com Page 7 of 9

Q&A 1. Could BDP be used outdoor? Yes. Firstly, the finishing of structure is zinc coating with a better water-proof. Secondly, extra covers could be installed to prevent from rain, snow, and heavy wind. 2. Could BDP series be used for parking SUV? BDP series could be customized to fit for SUV, for detailed requirements please contact Mutrade sales. 3. What s the voltage requirement? The standard voltage should be 380v, 3P. Some local voltages could be customized according to clients' request. 4. Can this product still operate if electricity failure happens? No, if electricity failure happens often in your place, you have to have a back-up generator to supply power. 5. Can BDP series installed by customer themselves? If you re new for our BDP series, we recommend sending our engineer to guide the installation. Warranty policy MUTRADE s parking equipment has a 5 years warranty on structure, and first year warranty on the whole machine. Within the warranty period, Mutrade is responsible for the parts and structure, not including labor nor any other cost unless pre-agreed. Power units, hydraulic cylinders, and all other assembly components such as slip plates, cables, chains, valves, switches etc, are warranted for one year against defects in material or workmanship under normal use. MUTRADE shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. MUTRADE will not be responsible on any labor costs unless pre-agreed. Mutrade will not responsible for the modification or upgrade of the product from the client unless pre-agreed. These warranties do not extend to... - defects caused by ordinary wear, abuse, misuse, shipping damage, un-proper installation, voltage or lack of required maintenance; - damages resulting from purchaser s neglect or failure to operate products in accordance with instructions provided in the owner s manual(s) and/or other accompanying instructions supplied; - normal wear items or service normally required to maintain the product in a safe operating condition; - any component damaged in shipment; - other items not listed but may be considered general wear parts; - damage caused by rain, excessive humidity, corrosive environments or other contaminants - any change or modification made to the equipment without pre-agreed These warranties do not extend to any cosmetic defect not interfering with equipment functionality or any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a MUTRADE product or the breach or delay in performance of the warranty. This warranty is exclusive and in lieu of all other warranties expressed or implied. MUTRADE makes no warranty on components and/or accessories furnished to MUTRADE by third parties. These are warranted only to the extent of the original manufacturer s warranty to MUTRADE. Other items not listed but may be considered general wear parts. MUTRADE reserves the right to make design changes or add improvements to its product line without incurring any obligation to make such changes on product sold previously. Warranty adjustments within the above stated policies are based on the model and serial number of the equipment. This data must be furnished with all warranty claims. Qingdao Mutrade Co., Ltd. www.qdmutrade.com Page 8 of 9

Important notice About the customized size: If the size of the platform need to be customized based on customer require, difficulties might arise when entering or exiting the cars on the parking units. This depends on car type, the access and the individual driving behavior. Operating device: The position of the operating device depends on the project (switch post, house wall). From bottom of the shaft to the operating device an empty pipe DN40 with taut wire is necessary. Temperature: The installation is designed to operate between -30 to +40 C. Atmospheric Humidity: 50% at +40 C. If the lol circumstances differ from the above please contact MuTrade. Illumination: Illumination has to be considered acc. to local requirements by client. Illumination in the shaft for maintenance is required to be minimum 80 Lux. Maintenance: Regular maintenance by qualified personnel can be provided by means of an Annual Service Contract. Protection against corrosion: Independent of a maintenance workings has to be carried out acc. to MuTrade Cleaning and Maintenance Instruction regularly. Clean up galvanized parts and platforms of dirt and road salt as well as other pollution (corrosion danger)! Pit must be always ventilated well. Project Reference Qingdao Mutrade Co., Ltd. www.qdmutrade.com Page 9 of 9