Outdoor Lighting
Urban Lighting OUTDOOR Thorn offers many different types of Urban Lighting. Use this pictorial summary to help find what you need URBAN LIGHTING Alumet Adelie Dyana Dyana LED II Avenue Deco 66 71 72 74 75 Avenue F Avenue Virtual Freesia Plurio Plurio Effect 77 79 81 83 84 Legend Classic Legend Modern EP145 Lemnis 65 Gamma Basique 86 88 90 92 94 ECU, Joondalup, WA Glaremaster II 96 65
Alumet LED NEW LEDs 4x17W Alumet Stage T16 (FDH) G5 54W Alumet Classic HIT-CE (MT) G12 70/150W Alumet Indirect, 70W only for Direct CPO-TW (MT) PGZ-12 60/140W Alumet Indirect, 60W only for Direct HIR-CE111(MR) GX8.5 4x35W Alumet Stage AS/NZS60598 Class I Electrical IK08 IP65 Lighting columns for pedestrian spaces and creative minds Alumet Classic Safety and visual guidance Alumet Control Indirect Comfort without obtrusive light Alumet Control Direct Performance and efficiency Alumet Stage Pure theatre 66
Alumet Classic NEW OUTDOOR A sleek and simple lighting column, can orchestrate lighting compositions in a planned sequence while blending harmoniously with traditional and modern urban landscapes Exceptional visual comfort Ø 200 Ø 200 1250 1250 00 90 4000 300 500 4000 50 150 800 300 300 Ø400 MGR MPL Arabesque Decorative Lampshield Electronic ballast White light with good colour rendering Possibility to use coloured T16 lamps for ambience Aluminium decorative 180 lampshield with arabesque or square pattern available as an accessory Bowl: Opal impact-resistant acrylic. Top cap: Cast aluminium. Column: Aluminium extruded column. Powder coating: silver grey textured (close to RAL 9006). 4m high column base plate or inground. Flange: 400 x 400mm. Spacings: 300 x 300mm, bolts 18 x 400 (included). Total height (with lit part of 1150mn): 5.25m. Diameter: 200mm. Access to lamp and gear via 2 M6 screws. Electronic gear inside head pre-wired with 4m cable. To specify state: IP65 decorative lighting column for 2 x 54W T16 lamps and matching aluminium column. As Thorn Alumet Classic. URBAN LIGHTING Ordering Guide Lamps to be ordered separately. For complete fitting order Luminaire and column. Lampshields sold as accessory. Description Ilcos Code Socket Wt (kg) SAP Code Luminaire ALUMET CLASSIC 2X54W T16 CL1 OP FDH G5 11.0 96255206 Columns ALUMET COL 4M MGR AL SIL 38.0 96256780 ALUMET COL 4M MPL AL FAI SIL 37.0 96256782 Lampshields ALUMET LAMPSHIELD 180 SQUARE 3.0 96254469 ALUMET LAMPSHIELD 180 ARABESQUE 3.0 96255210 MGR - inground, MPL - base plate, FAI - bolts included, OP - opal Square Decorative Lampshield 12.5m 10.0m 7.5m 5.0m 2.5m 0m 2.5m 5.0m 7.5m 10.0m 12.5m 12.5m10.0m7.5m 5.0m 2.5m 0m 2.5m5.0m7.5m10.0m12.5m Alumet Classic 2 x T16 54W 0.5 lux 1.0 lux 2.5 lux 5.0 lux 7.5 lux 10.0 lux 15.0 lux 67
Alumet Control Indirect NEW A unique optical design for outstanding control of light and aesthetic effect Sets of Fresnel aluminium rings to minimise upward light <3% upward light Vertical element helps give spatial depth to an illuminated scene Electronic ballast ensure energy saving capacities Aluminium decorative 180 lampshield with arabesque or square pattern available as an accessory Bowl: Clear UV stabilized PC diffuser treated with anti-graffiti varnish. Optics Optical Fresnel rings and reflector made of anodised aluminium. Slotted aluminium optic cover around the bottom of the reflector. Top cap: cast aluminium. Column: Aluminium extruded column. Powder coating: silver grey textured (close to RAL 9006). Ø 200 Ø 200 1250 1250 0 90 4000 300 500 4000 50 150 800 300 300 Ø400 MGR MPL 4m high columns base plate or inground. Flange: 400 x 400mm. Spacings: 300 x 300mm, bolts 18 x 400 (included). Total height (with lit part of 1.25m): 5.25m. Diameter: 200mm. Access to lamp via 2 M6 screws in the top and by lifting up the bottom optic cover and reflector. Electronic gear in IP65 box suspended on the top of the column connected to the head and pre-wired with 4m cable. To specify state: IP65 decorative lighting column for 70/150W HIT-CE or 60/140W CPO lamp with Fresnel optical rings and matching aluminium column. As Thorn Alumet Control Indirect. Ordering Guides Lamps to be ordered separately. For complete fitting order Luminaire and column. Lampshields sold as accessory. Description Ilcos Socket Wt (kg) SAP Code Code Luminaire ALUMET CONTROL/I 60W CPO CL MT PGZ-12 14.0 96255190 ALUMET CONTROL/I 140W CPO CL MT PGZ-12 14.0 96255194 ALUMET CONTROL/I 70W HIT-CE CL MT G12 14.0 96255198 ALUMET CONTROL/I 150W HIT-CE CL MT G12 14.0 96255200 Columns ALUMET COL 4M MGR AL SIL 38.0 96256780 ALUMET COL 4M MPL AL FAI SIL 37.0 96256782 Lampshields ALUMET LAMPSHIELD 180 SQUARE 3.0 96254469 ALUMET LAMPSHIELD 180 ARABESQUE 3.0 96255210 MGR - inground, MPL - base plate, FAI - bolts included, OP - opal Suggested eco-friendly alternative Arabesque Decorative Lampshield Square Decorative Lampshield 12.5m 10.0m 7.5m 5.0m 2.5m 0m 2.5m 5.0m 7.5m 10.0m 12.5m 12.5m 10.0m7.5m 5.0m 2.5m 0m 2.5m 5.0m 7.5m10.0m 12.5m Alumet Control Indirect HIT-CE 70W 0.5 lux 1.0 lux 2.5 lux 5.0 lux 7.5 lux 10.0 lux 15.0 lux 68
Alumet Control Direct NEW OUTDOOR Combines performance, lighting control and aesthetics in a lighting column The highest performing and efficient member of the Alumet family A shining and stylish presence in the city ideal for enhancing and modernising a pedestrian area or light a cycle path Electronic ballast ensure energy saving capacities Direct lighting principle for better control of light, ULOR<2% Aluminium decorative 180 lampshield with arabesque or square pattern available as an accessory 90 50 150 300 Ø 200 Ø 200 MGR 1250 3000/4000 800 300 500 Ø400 MPL 1250 3000/4000 300 Bowl: Clear UV stabilized PC treated with anti-graffiti varnish. Optics: Reflector made of anodised aluminium. Slotted aluminium optic cover around top reflector. Top cap: cast aluminium. Glass lens. Column: Aluminium extruded column. Powder coating: silver grey textured (close to RAL 9006). 4m high columns base plate or inground. Flange: 400 x 400mm, spacings: 300 x 300mm, bolts 18 x 400 (included). Total height (with lit part of 1.25m): 5.25m Diameter: 200mm Access to lamp via 2 M6 screws in the top and by lifting the bottom optic cover. Electronic gear in IP65 box suspended in the top of the column connected to the head and pre-wired with 4m cable. To specify state: IP65 decorative lighting column for 70W HIT-CE or 60W CPO lamp with Direct optic and fresnel lens and matching aluminium column. As Thorn Alumet Control Direct. URBAN LIGHTING Ordering Guides Lamps to be ordered separately. For complete fitting order Luminaire and column. Lampshields sold as accessory. Description Ilcos Socket Wt (kg) SAP Code Code Luminaire ALUMET CONTROL/D 60W CPO CL MT PGZ-12 14.0 96256727 ALUMET CONTROL/D 70W HIT-CE G12 CL MT G12 14.0 96256733 Columns ALUMET COL 4M MGR AL SIL 38.0 96256780 ALUMET COL 4M MPL AL FAI SIL 37.0 96256782 Lampshields ALUMET LAMPSHIELD 180 SQUARE 3.0 96254469 ALUMET LAMPSHIELD 180 ARABESQUE 3.0 96255210 Arabesque Decorative Lampshield 12.5m 10.0m 7.5m 5.0m 2.5m 0m 2.5m 5.0m 7.5m 10.0m 12.5m 12.5m 10.0m 7.5m 5.0m 2.5m0m2.5m5.0m7.5m10.0m 12.5m Alumet Control Direct HIT-CE 70W 0.5 lux 1.0 lux 2.5 lux 5.0 lux 7.5 lux 10.0 lux 15.0 lux MGR - inground, MPL - base plate, FAI - bolts included, OP - opal Suggested eco-friendly alternative Square Decorative Lampshield 69
Alumet Stage LED NEW By day Alumet Stage is decorative and visually appealing. By night it comes into its own, enabling the designer to create a multiplicity of dramatic lighting effects Ordering Guide For complete fitting order head, column and LED modules. HIR-CE lamps to be ordered separately. Optical accessories and lampshield sold as accessory. Description Ilcos Code Socket Wt (kg) SAP Code Luminaire ALUMET STAGE 4X35W HIR-C111 CL* MR GX8.5 17 96255202 ALUMET STAGE 4X17W LEDs CL* LED 17 96255204 Lamps/LED modules ALUMET STAGE 17W LED WW INT 0.3 96255217 ALUMET STAGE 17W LED WW SINT 0.3 96255218 ALUMET STAGE 17W LED CW INT 0.3 96255219 ALUMET STAGE 17W LED CW SINT 0.3 96255220 ALUMET STAGE 17W LED BLUE INT 0.3 96255221 ALUMET STAGE 17W LED GREEN INT 0.3 96255222 ALUMET STAGE 17W LED RED INT 0.3 96255223 ALUMET STAGE 17W LED AMBER INT 0.3 96255224 HIR-CE111 35W/10 /830 GX8.5 96062315 HIR-CE111 35W/24 /830 GX8.5 96062314 HIR-CE111 35W/40 /830 GX8.5 96038407 Lampshields and optical accessories ALUMET LAMPSHIELD 180 SQUARE 3.0 96254469 ALUMET LAMPSHIELD 180 ARABESQUE 3.0 96255210 ALUMET STAGE FILTER B 0.2 96255211 ALUMET STAGE FILTER R 0.2 96255212 ALUMET STAGE FILTER G 0.2 96255213 ALUMET STAGE FILTER Y 0.2 96255214 ALUMET STAGE LR 0.2 96255215 ALUMET STAGE LV 0.2 96255216 Columns ALUMET COL 4M MGR AL SIL 38 96256780 ALUMET COL 4M MPL AL FAI SIL 37 96256782 MPL - base plate, MGR - inground, FAI - bolts included, WW - warm white, CW - cool white, INT - narrow beam, SINT - medium beam, CL - clear, LR - Refractor, LV - Anti-glare louvre *Light sources (LEDs and HIR-CE111 cannot be mixed on the same head). Suggested eco-friendly alternative Four multidirectional spots (Metal Halide or LEDs) with optical accessories for a wide variety of effects Decorative lampshield accessory provides further aesthetical appeal and integration within architectural projects Ability to select a combination of lamp types and/or colours Aluminium decorative 180 lampshield with arabesque or square pattern available as an accessory Intensity (cd) 30000 25000 20000 15000 10000 5000 0-60 -30 0 30 60 Alumet Stage HIR-CE Imax: 26800cd Lamp: 35W HIR111 10 Ap: 2 x 4 Trans. Plane Bowl: Clear UV stabilised PC treated with anti-graffiti varnish. Top cap: cast aluminium. Lamp support and frame: aluminium. Spine: steel. Column: Aluminium extruded column. Optical accessories: Anti-glare louvre(lv), refractor(lr) and colour filters (red, blue, green, yellow). Powder coating: silver grey textured (close to RAL 9006). 4m high columns base plate or inground. Flange: 400 x 400mm, spacings: 300 x 300mm, bolts 18 x 400 (included). Total height (with lit part of 1.25m): 5.25m. Diameter: 200mm. Access to lamps via 2 M6 screws in the top and by removing (tool free) a spring behind spots frame. Easy settings of spots and accessories with one tool, possibility to combine colour filters and refractor. Electronic gear in IP65 box suspended in the top of the column connected to the head and pre-wired with 4m cable. To specify state: IP65 decorative lighting column equipped with multi-rotational spots for 4 x 35W HIR-CE111 or 4 x 17W LEDs modules and matching coated aluminium column. As Thorn Alumet Stage. 90 50 150 300 Ø 200 Ø 200 MGR 1250 3000/4000 800 300 500 Ø400 MPL 1250 3000/4000 300 70
Adelie LED LEDs 32x1.6W AS/NZS60598 Class II Electrical IK08 IP65 OUTDOOR Style, comfort and durability in a uniquely designed indirect LED lantern Indirect light, elegant and simple design Cast aluminium ribbed base to optimise dissipation of heat for longer life of LEDs (up to 50,000 hours) Design of canopy, reflector and optics optimised for visual comfort and uniformity Easy installation and maintenance Robust and durable aluminium construction, sealed to IP65 Canopy: spun aluminium powder coated sandy grey. Base: cast aluminium sandy grey Lens: acrylic. Reflector: aluminium powder coated white with Teflon coating. Dedicated column: aluminium conical painted sandy grey Control gear plate: aluminium. Post-top mounting. Lantern base fixed inside dedicated column by one M10 screw. IP66 LED control gear pre-wired with 3.5 metre cable length to the lantern, suspended on plate at base of column. Aluminium tapered column, base plate or buried mounted. URBAN LIGHTING Ø223 Ø774 Ø76 Ø76 Ø12 255 25 312 To specify lantern state: IP65 indirect lighting lantern with aluminium canopy and Teflon coated reflector incorporated into a cast aluminium base with a acrylic lens and 32 X 1.6W LEDs. Canopy, base and column finished in sandy grey. Supplied in one box complete with IP66 LED control gear and 3.5m cable. As Thorn Adelie. 3000 12m 10m 8m 6m 4m 2m 0m -2m -4m -6m -8m 10lux 7.5lux 5lux 2.5lux 1lux 0.5lux 120-10m 225-12m -12m -10m -8m -6m -4m -2m 0m 2m 4m 6m 8m 10m12m Adelie on 3m Column MGR 700 Ordering Guide For complete package order lantern, column and column accessories. Description Wt (kg) SAP Code Lantern (with driver) ADELIE 51W LED 5200K 7.5 96254108 ADELIE 51W LED 3800K 7.5 96257121 Column ADELIE COL 3M MPL CCO GRY 10.2 96536833 ADELIE COL 3M MGR CCO GRY 10.5 96536834 Column Accessories FOUNDATION BOLTS 96062227 CAGE ASSEMBLY 96062228 GRY - grey, MGR - buried, MPL - base plate 71
Dyana HIT-CE (MT) E27/E40 70-250W HIT-CE (MT) E27/E40 70-250W CPO-TW (MT) PGZ-12 60-140W AS/NZS60598 Class I Electrical IP66 Outstanding lighting for the urban landscape, in a distinctively modern style luminaire Combines high performance, energy efficiency and versatility with easy maintenance - all in a distinctive, slim and modern shape that will compliment any environment Suitable for requirements as diverse as high density housing, open spaces, paths and roads Wherever a project calls for outstanding night performance with contemporary elegance during the day, Dyana is the perfect response HIgh frequency electronic control gear to reduce energy consumption The remarkable Dyana design balances optimum usability with breathtaking style. Its slim, pure contours combine with an ergonomic interior to promote fast-track maintenance and a long working life A choice of two luminaire sizes allows designers to make the best choice for any project, in mounting heights between 4 and 12 metres Dyana delivers glare-free light for a more pleasant urban environment 72
OUTDOOR Body: die-cast aluminium powder coated texturised grey (Akzo 900). Spigot: die-cast aluminium powder coated texturised grey (Azco 900). Canopy: spun aluminium powder coated texturised grey (Azco 900). Enclosure: toughened glass. Reflector: high purity anodised aluminium. Gear plate: galvanised steel. Gasket: silicon. Lateral mounting: 60 x 100mm long spigot. Secured by 2 screws with safety bolts. Cable gland for 8mm to 13mm cable. Tool free access to lamp after opening the optical housing via 2 x 1/4 lockers. Tool free access to gear after release of the retaining leg. Gear is tool free removable with retained screws. All connections are plug and socket. Delivered ready to install, complete with factory fitted integral gear and adjustable lamp settings, all supplied in a single carton (without lamp). To specify state: Full IP66 aluminium streetlighting fitting for 70 to 250W lamps. Side entry or top mounting onto 60mm diameter. Tool-free maintenance of gear and lamp. As Thorn Dyana 1 and 2. Simple tool free access to luminaire and lamp Automatic disconnection Tool free removal of control gear via plug/socket Optibloc system ensures easy access and maintenance Tool free access to control gear Internal components are modular for easy handling 510ø 666 600ø 760 158 176 Windage: 0.035m² Windage: 0.039m² Size 1 Size 2 URBAN LIGHTING Ordering Guide Lamps to be ordered separately. Description Ilcos Code Socket Wt (kg) SAP Code Size 1 DYANA 1 60W CPO-TW CL1 MLE MT PGZ 12 9.10 96251689 DYANA 1 140W CPO-TW CL1 MLE MT PGZ 12 9.30 96251678 DYANA 1 70W HIT DGE CL1 MLE ST/MT E40 9.20 96253160 DYANA 1 150W HIT DGE CL1 MLE ST/MT E40 9.30 96253158 DYANA 1 70W HST DGE CL1 MLE ST/MT E27 9.20 96251690 DYANA 1 150W HST DGE CL1 MLE ST/MT E40 9.30 96251679 Size 2 DYANA 2 140W CPO-TW CL1 MLE MT PGZ 12 11.70 96251701 DYANA 2 250W 240V HID CL1 MLE ST/MT E40 14.40 96251359 DYANA 2 150W HIT DGE CL1 MLE ST/MT E40 11.90 96253092 DYANA 2 150W HST DGE CL1 MLE ST/MT E40 11.90 96251702 All versions except 250W are electronic gear. Suggested eco-friendly alternative 73
Dyana LED II LED NEW LEDs 39-58W AS/NZS60598 Class II Electrical IK10 IP66 Available February 2012 A stylish and efficient urban lantern using LED technology Patented (street) optical system to enhance light distribution and reduce glare Choice of 2 versions: 3000lm and 5000lm Dyana LED provides effective lighting for many outdoor applications High frequency electronic dimming control gear Choice of post-top or sideentry Choice of street or asymmetric optics 590 510ø 633 510ø 666 Body and spigot: die-cast aluminium, textured anthracite finish (Akzo 900). Canopy: spun aluminium, textured anthracite finish (Akzo 900). Flat glass cover: 5mm thick toughened glass. Gasket: silicon. Side-entry mounting Ø 60mm, tilt = 0. Post-top mounting Ø 60mm, tilt = 10. End cap secured by 2 screws and 2 bolts. Slim section: only 110mm thick. Supplied complete and ready to install, in a single box. To Specify State: Stylish IP66 LED urban lighting lantern with unique optics (street or flood) that enhances light distribution and reduces glare. As Thorn Dyana LED II. 279 110 MLE MTP Ordering Guide Supplied complete with LEDs. SAP Description Wt (kg) SAP Code MLE - Side Entry Versions DYANA LED II 39W/BP CL2 STREET 10.7 96259181 DYANA LED II 58W/BP CL2 STREET 10.7 96259183 DYANA LED II 39W/BP CL2 A/S 10.7 96259185 DYANA LED II 58W/BP CL2 A/S 10.8 96259187 MTP - Post-top Versions DYANA LED II 39W/BP CL2 STREET 11.2 96259180 DYANA LED II 58W/BP CL2 STREET 11.3 96259182 DYANA LED II 39W/BP CL2 A/S 11.2 96259184 DYANA LED II 58W/BP CL2 A/S 11.3 96259186 BP - Power reduction (step dim) 74
Avenue Deco HSE (SE) E27 70W AS/NZS60598 Class II Electrical IP54 OUTDOOR Design co-ordinated family of amenity luminaires comprising of post top and wall bracket mounted lanterns and tapered columns Design minimises the spread of light above the horizontal Variety of decorative lamp shields for added aesthetics Column has choice of copper or steel finished sleeve to match lamp shields Control gear integral within lantern or bracket Lantern body and canopy: cast aluminium, finished anthracite. Lantern bowl: clear. Polycarbonate opal to order. Lamp shields: opal polycarbonate, copper-plated steel or stainless steel. Column: aluminium, powder coated anthracite, fitted with a 0.9m decorative sleeve, finished in untreated polished copper or satin stainless steel. Lantern: Recommended mounting height 3m. Suitable for Ø60mm spigot. 3 way terminal block for 4mm 2 conductors. Integral control gear. Control gear in lantern or wall bracket. Column: buried or base plate mounted. Latter supplied with four fixing bolts (JT16/ 14 x 300). 3m column tapers from 135/Ø114mm to Ø76mm with Ø60mm spigot. URBAN LIGHTING 600 640 To specify lantern state: Aluminium bodied conical lantern for post top/wall bracket mounting with clear bowl and copper/stainless steel/perforated/slotted/opal polycarbonate lampshield, finished anthracite. As Thorn Avenue Deco. To specify column state: 3m tapered aluminium column with or without decorative sleeve, finished copper/stainless steel. Supplied for buried/base plate mounting. As Thorn Avenue Deco Column. 76ø 3000 135ø 800 114ø 247 200 75
8m lux/1000 lm 4m 0 4m 2.00 1.00 0.50 8m 8m 4m 0 4m 8m Avenue Cat. No. Deco J136443 with clear bowl and polycarbonate lamp shield Lamp: 70W HSE Mounting height: 3.1m Copper perforated lamp shield Wall bracket lantern 76 Copper and stainless steel sleeves Ordering Guide Order lantern and column for complete fitting. Lamp to be ordered separately. Description Ilcos Code Socket Wt (kg) SAP Code Post top lantern with clear bowl flat canopy Complete with integral control gear. AVENUE DECO PT HSE 70W POLYCARBONATE LAMP SHIELD SE E27 17.0 96253547 AVENUE DECO PT HSE 70W COPPER (PERFORATED) LAMP SHIELD SE E27 17.0 96253545 AVENUE DECO PT HSE 70W STAINLESS STEEL (PERFORATED) LAMP SHIELD SE E27 17.0 96253543 Wall Bracket Lantern with clear bowl Control gear in bracket. AVENUE DECO WL HSE 70W POLYCARBONATE LAMP SHIELD SE E27 17.0 96005693 AVENUE DECO WL HSE 70W COPPER (PERFORATED) LAMP SHIELD SE E27 17.0 96005685 AVENUE DECO WL HSE 70W STAINLESS STEEL (PERFORATED) LAMP SHIELD SE E27 17.0 96005689 3m Tapered Columns COPPER SLEEVE MGR 21.0 96004477 STAINLESS STEEL SLEEVE MGR 21.0 96004479 COPPER SLEEVE MPL 21.0 96004478 STAINLESS STEEL SLEEVE MPL 21.0 96004480 WITHOUT SLEEVE MPL 21.0 96004475 WITHOUT SLEEVE, MGR 21.0 96004476 MGR - Buried, MPL - Base plate. Metal Halide versions available to special order.
Avenue F HSE-I (SE/I) E27 70W TC-TEL (FSM) Gx24q-4 42W HIE (ME) E27 100W AS/NZS60598 Class I Electrical IP54 OUTDOOR A family of amenity luminaires comprising of post top and wall bracket mounted lanterns and decorative columns Lantern design minimises the spread of light above the horizontal Choice of opal or clear conical shaped bowl Clear diffuser is enhanced by a luminous frosted band to limit glare and enhance performance Control gear integral within lantern canopy Columns available for rooted or flange plate mounting Lantern body, canopy and wall flange: aluminium, powder coated anthracite, textured. Wall bracket: cast aluminium and galvanised steel, finished anthracite, textured. Lantern bowl: opal or clear (with sandblasted frosted ring) polycarbonate. Column: extruded and cast aluminium, powder-coated anthracite. Lanterns recommended mounting height 3-4m. Post-top lantern: Integral control gear in canopy. Avenue F 700 - suitable for Ø60mm x 100mm long spigot. Wall lantern: Mounts directly to wall via two Ø10mm holes at 120mm centres. 5 way terminal block for 6mm 2 conductors. Looping possible. Integral control gear in lantern canopy. Columns: Buried or base plate mounted. Fixes via four Ø20mm holes at 160mm centres. To specify lanterns state: Aluminium bodied conical lantern for post top/wall mounting/ with opal/clear bowl, finished textured anthracite employing 70W HSE-I/ 42W TC -TEL/ 100W HIE lamp. As Thorn Avenue F. To specify columns state: 2.9m/2.1m aluminium with 4 parallel square rods/cross profile. Supplied for buried/base plate mounting. As Thorn Avenue F700/F500 column. URBAN LIGHTING 77
Buried Base Plate 500 60ø 127 127 60ø 8m lux/1000 lm 400 4m 800 114ø 160 240 20ø F500 120ø 275 700 2900 2900 0 4m 4.00 2.00 1.00 0.60 F700 F700 500 Parallel Square Cross Profile 8m 8m 4m 0 4m 8m Avenue Cat. No. F J134005 700 post top with clear bowl Lamp: 70W HSE-I Mounting height: 4m Wall bracket lantern Ordering Guide Lamp to be ordered separately. Description Ilcos Code Socket Wt (kg) SAP Code Post Top Lanterns AVENUE F P/TOP HSE-I 70W CLEAR BOWL SE/I E27 10.0 96017141 AVENUE F P/TOP HSE-I 70W OPAL BOWL SE/I E27 10.0 96038265 AVENUE F P/TOP TC-TEL 42W CLEAR BOWL FSM Gx24Q-4 10.0 96038263 AVENUE F P/TOP TC-TEL 42W OPAL BOWL FSM Gx24Q-4 10.0 96038267 AVENUE F P/TOP HIE 100W CLEAR BOWL ME E27 10.0 96017151 AVENUE F P/TOP HIE 100W OPAL BOWL ME E27 10.0 96038268 F700 Columns 2.9M 4 PARALLEL SQUARE RODS, MPL 17.0 96254235 2.9M 4 PARALLEL SQUARE RODS, MGR 18.0 96254234 2.9M CROSS PROFILE, MPL 17.0 96254231 2.9M CROSS PROFILE, MGR 96254230 Wall Bracket F500 Lantern HSE-I 70W WITH CLEAR BOWL SE/I E27 9.0 96011616 HSE-1 70W WITH OPAL BOWL SE/I E27 9.0 96004445 MGR - Buried, MPL Base plate Moseley Square, Glenelg, SA 78
Avenue Virtual HIT-CE (MT) G12 70-150W AS/NZS60598 Class II Electrical 5 Nm Impact resistant IP65 OUTDOOR An elegant, decorative indirect lighting lantern, with a choice of complementary columns Luminaire and reflector design give 100% indirect lighting and prevent the spread of light above the horizontal Excellent performance: 95% of the light emitted from the light source is captured by the top reflector Flat top reflector with multiple rings eradicates glare whilst controlling the light distribution for excellent uniform illuminance Decorative lamp shield provides visual appeal Silver effect finish for high visual impact Dedicated column available URBAN LIGHTING 79
Bottom reflector Top plate Canopy: LM6 Marine grade die-cast aluminium, powder coated silver colour, textured (close to RAL 9006). Top reflector: pressed semi-specular aluminium with clear lacquer protection. Closure screen: heat resistant Borosilicate glass, coated with weather resistant optical lacquer for optimal transmission of light. Bowl: pressed anodised aluminium. Outer surface treated for optimal weather resistance. Lamp shield: UV stabilised PC. Arm and arm base: die-cast aluminium, powder coated silver colour, textured (close to RAL 9006). Column: 3m aluminium, powder coated silver colour, textured (close to RAL 9006). To specify lanterns state: Aluminium bodied conical lantern for post top mounting with UV resistant polycarbonate lamp shield and Borosilicate glass projector closure screen, powder coated silver colour, textured. Flat top reflector with multiple rings. Indirect lighting, for use with 70/150W HIT-CE lamp. As Thorn Avenue Virtual. To specify columns state: 3m cylindrical galvanised steel or aluminium with silver effect finish column, with Ø60mm x 100mm long spigot. Supplied for buried/base plate mounting. As Thorn Avenue Virtual Column. Lantern recommended mounting height 3 to 4m. Post-top lantern: Suitable for Ø60mm x 100mm long spigot. Columns: Buried or base plate mounted. Base plate version fixes via four Ø20mm holes at 200mm centres Cylindrical section gear box mounts in column, and is used with connection box. 465 680 60ø Decorative lamp shield 76/90ø 76/90ø Ordering Guide Lamps to be ordered separately. For complete fitting please order lantern, gear tray and column. Description Ilcos Code Socket Wt (kg) SAP Code Lantern AVENUE VIRTUAL LANTERN 9.0 96220640 Gear Tray HIT-CE 70W MT G12 2.2 96012004 HIT-CE 150W MT G12 2.8 96012005 Column AVENUE COL 3M MGR AL CCO ANT 20.0 96004475 AVENUE COL 3M CCO AL MPL FAI GRY 20.0 96212043 8m lux/1000 lm 4m 0 4m 8m 8m 4m 0 4m 8m Mounting Avenue Virtual height: 3.6m Lamp: 70W HIT-CE Mounting height: 3.6m 5.00 3.00 1.00 0.50 3000/ 3800 250 200 20ø 3000/ 3800 800 MPL - base plate, MGR - buried, FAI - foundation bolts included 80
Freesia HIT-CE (MT-CE) E27/40 70-150W TC-TEL (FSM) G2x24q-4 42W HIT (MT) E40 250Q HST (ST) E27/40 70-250W AS/NZS60598 Class II Electrical IP65 (optical compartment - size 1) IP54 (control gear compartment - size 1) IP66 (optical compartment - size 2) IP44 (control gear compartment - size 2) OUTDOOR A pendant style lantern with echoes of heritage Based on the proven Decostreet construction High performance optical system (Optibloc ) engineered to give improved visibility and reduced glares Easy installation and maintenance Classical shape with contemporary performance Choice of conical, round and deep bowls Non-degrading materials ensure durability and low maintenance IP65/66 optical compartment Adjustable lampholder position enables customisation for particular projects URBAN LIGHTING 81
Choice of two reflectors: Asymmetrical reflector - For street and road lighting applications. By changing the lampholder positions different light distributions can be obtained to satisfy various project requirements. Body: die-cast aluminium. Canopy: spun aluminium, painted light grey RAL 7001. Enclosure: UV stabilised polycarbonate. Decorative ring: polypropylene, painted dark grey RAL 7024. Optical reflector: aluminium. Suspended mounting with a threaded 34mm diameter tube. To specify state: Decorative street lantern in die cast aluminium with spun aluminium canopy in classical style, choice of conical, round or deep bowls, in two sizes. 70/150/250W HST, 70/150W HIT-CE, 250W HIT, 42W TC-TEL lamp options. Suspended mounting. Optical compartment sealed to IP65/IP66. As Thorn Freesia. Windage Size 1: 0.14m 2 Size 2: 0.21m 2 Conical bowl Windage Size 1: 0.16m 2 Size 2: 0.23m 2 620ø/725ø 609/727 599/717 Ordering Guide Lamps to be ordered separately. For complete fitting please order gear tray and lantern. Description Ilcos Code Socket Wt (kg) SAP Code Gear trays for size 1 DST1 GT 70W 240V HST/HIT-CE V4L1A ST/MT E27 2.5 96012412 DST1 GT 150W 240V HST/HIT-CE V1 ST/MT E40 3.4 96011409 DST1 GT 42W TC-TEL V2L2A FSM GX24Q-4 1.5 96002542 Gear trays for size 2 DST2 GT 150W 240V HST/HIT-CE V3L1 ST/MT E40 3.1 96011304 DST2 GT 250W 240V HST/HIT V4L3 ST/MT E40 3.8 96011418 Lantern for Freesia Size 1 FREESIA1 ECO/CL/PC RAS CONICAL BOWL 9.0 96012415 FREESIA1 ERD/CL/PC RAS ROUND BOWL 9.0 96012416 FREESIA1 ERP/CL/PC RAS DEEP BOWL 9.0 96012417 Lantern for Freesia Size 2 FREESIA2 ECO/CL/PC RAS CONICAL BOWL 13.0 96012418 FREESIA2 ERD/CL/PC RAS ROUND BOWL 13.0 96012419 FREESIA2 ERP/CL/PC RAS DEEP BOWL 13.0 96012420 Product supplied less bracket 620ø/725ø Round bowl 4h 4h 3h 2.5 lux 3h 2.5 lux Windage Size 1: 0.19m2 Size 2: 0.27m2 721/849 2h 1h 0h 5 lux 10 lux 25 lux 50 lux 2h 1h 0h 5 lux 10 lux 25 lux 50 lux -1h 75 lux -1h 75 lux -2h 100 lux -2h 100 lux Deep bowl 620ø/725ø -3h -5h -4h -3h -2h -1h -0h 1h 2h 3h 4h 5h Fressia Freesia/Nerine size 1 asymmetrical size 1 asymmetrical reflector, reflector, conical bowl Lamp: 150W HST Lamp position: V2 LOR: 0.67 DLOR: 0.67-3h -5h -4h -3h -2h -1h -0h 1h 2h 3h 4h 5h Fressia size 2 asymmetrical reflector, conical bowl Lamp: 250W HST Lamp position: V8L4-A LOR: 0.70 DLOR: 0.70 82
Plurio TC-TEL (FSM) GX24q-5 57W HSE (SE) E27 70W HIE (ME) E27 70W HSE (SE) E40 100W HIE (ME) E40 100W AS/NZS60598 Class I Electrical IK08 Class II Electrical IP66 OUTDOOR A lantern with innovative high performance optical system engineered for improved visibility, reduced glare and control of obtrusive light Two canopy styles (with clear bowls) to suit any given landscapes Multifacetted optic provides outstanding illuminance and uniformity Canopy avoids obtrusive light (ULOR down to 0% with ULOR 0% accessory) Choice of lamp that optimise energy consumption Aluminium lampshield (120 ) for residential cut-off available Glare avoidance with use of prisms on clear bowl Canopy, base and optic made of aluminium. Optics: aluminium multifacetted reflector. Bowl: UV stabilised polycarbonate clear with antiglare prisms. Powder coating: silver grey textured (close to RAL 9006). Post top mounting Spigot: 60mm diameter x 75mm long. Recommended height: 3/4m. Dedicated range of columns and brackets. Access to lamp and gear via 3 screws below the bowl. URBAN LIGHTING Resistant (IP66 seal), durable and recyclable materials Dedicated range of decorative columns and brackets Ø564 To specify lantern state: IP66 post top decorative aluminium lantern for 70-100W high pressure sodium or metal halide, 57W compact fluorescent, powder coated silver grey finish, with multifacetted aluminium optic. As Thorn Plurio. 567 219 Ø60 Plurio Original Windage: 0.070m 2 Ø564 15 12 9 6 3 555 0 3 6 20lx 10lx 5lx 2lx 9 219 12 15 15 12 9 6 3 0 3 6 9 12 15 Ø60 Plurio Round Windage: 0.070m 2 Plurio with facetted reflector and clear bowl Lamp: 70W HIE DLOR: 69% ULOR: 1% Lamp height: 4M Ordering Guide: Lamps to be ordered separately. Description Ilcos Socket Wt Original Round Code (kg) SAP Code SAP Code Lantern with conventional gear PLURIO 100W HID CL1* SE/ME E40 9.0 96253963 96253961 Lantern with electronic gear PLURIO 70W HIDE CL1* SE/ME E27 8.0 96253960 96253958 PLURIO 57W TC-TEL CL2 FSM GX24Q-5 7.4 96253921 96253919 Accessories PLURIO ULOR 0% 0.3 96254523 PLURIO LAMP SHIELD 120 0.5 96254524 PLURIO BASE 76MM - 59002276 CL1 - class 1 electrical, CL2 - class 2 electrical. *Only use Venture elliptical lamps Suggested eco-friendly alternative Cd/1000lm 150 150 120 120 90 200 150 100 90 60 60 30 30 0 Plurio with facetted reflector and clear bowl Lamp: 70W HIE DLOR: 69% ULOR: 1% 83
Plurio Effect TC-TEL (FSM) GX24q-5 57W HSE (SE) E27 70W HIE (ME) E27 70W HSE (SE) E40 100W HIE (ME) E40 100W AS/NZS60598 Class I Electrical IK08 Class II Electrical IP66 Original architectural lantern with a customisable canopy to create a soft ambience as well as promote corporate logos and special events At night time, light is visible through the transparent white rings on the canopy creating a welcoming and stylish ambience Ideal in parks or promenades to reveal tree foliage and to provide users with a feeling of safety Possibility to customise the canopy pattern on request, Possibility to change the filter for special events Glare avoidance with use of prisms on clear bowl No obtrusive light, ULOR = 4% Optimised maintenance and installation Dedicated range of decorative poles and brackets Aluminium lampshield (120 ) to cut-off flux available Canopy: Transparent polycarbonate painted externally in grey silver (RAL9006) with internal grey layered printed white filter. Base: Cast aluminium powder coated silver grey textured (close to RAL9006). Bowl: Clear UV stabilised polycarbonate with external anti glare prisms. Post top mounting. Spigot: 60mm diameter x 75m long. Recommended height: 3/4m. Dedicated range of columns and brackets. Access to lamp and gear via 3 screws below the bowl. To specify lantern state: IP66 post top lantern for 70-100W high pressure sodium or metal halide, 57W compact fluorescent, made in transparent polycarbonate painted externally in grey silver with internal grey layered printed white PC filter, prismatic bowl and cast aluminium base in coated silver grey. As Thorn Plurio Effect. Ø564 567 219 Ø60 Ordering Guide: Lamps to be ordered separately. Description Ilcos Socket Wt SAP Code Code (kg) Lantern with conventional gear PLURIO E 100W HID CL1* SE/ME E40 7.8 96254033 Lantern with electronic gear PLURIO E 70W HIDE CL1* SE/ME E27 6.8 96254032 PLURIO E 57W TC-TEL CL2 FSM GX24Q-5 6.2 96254026 Accessories PLURIO ULOR 0% 0.3 96254523 PLURIO LAMP SHIELD 120 0.5 96254524 PLURIO BASE 76MM - 59002276 CL1 - class 1 electrical, CL2 - class 2 electrical. *Only use Venture elliptical lamps Suggested eco-friendly alternative Plurio Effect advertising music event (sample) Plurio Effect used for branding (sample) Plurio Effect Windage: 0.070m 2 15 12 9 6 3 0 20lux 3 10lux 5lux 6 2lux 9 12 15 15 12 9 6 3 0 3 6 9 12 15 Plurio Effect Lamp: 70W HIE DLOR: 47% ULOR: 4% Lamp Height: 4m 84
Plurio Columns & Brackets OUTDOOR A range of columns and brackets designed to harmonise both in style and proportion with Plurio lanterns A range of 3.5m galvanised steel columns, in a choice of tubular (with decorative tappered upper sleeve) and stepped (with decorative collar) forms Two choices of column installation: base plate or buried Three designs of bracket arm are available: single outreach, twin outreach and wall 75 271 636 Single bracket Windage: 0.07m 2 30 4xM6 at 90 Material/Finish Brackets: Powder coated silver grey (close to RAL 9006). Post-top brackets fix on a 60mm spigot. All brackets accept Plurio lanterns with 60mm spigots. Column: Galvanised steel, powder coated sandy grey 900 (close to RAL 7046). Spigot: 60mm. Height: 3.5m. Mounting: base plate (MPL) and buried (MGR). Base plate: 225x225mm Decorative Collar: Cast aluminium to be ordered separately powder coated silver grey as Plurio lantern (close to RAL 9006) to be ordered separately. Mounts on the column with 3 M8 screws (provided). Requires foundation steel cage (ordered separately). URBAN LIGHTING 636 636 75 271 30 4xM6 at 90 Twin bracket Windage: 0.13m 2 565 75 Ø15 170 220 80 Wall bracket Windage: 0.06m 2 Ordering Guide For complete package please order collar or uppersleeve, corresponding column, column accessories and bracket (if required). Ø60 80 Ø76 Ø60 Description Wt (kg) SAP Code Collar PLURIO COLLAR SIL 2.0 96253580 Plurio Columns for use with collar PLURIO COL 3.5M D140/76/60 MPL GRY 31.6 96536829 PLURIO COL 3.5M D140/76/60 MGR GRY 35.5 96536830 Upper Sleeve PLURIO BRA TOP 500MM MTP D102/60 SIL 4.0 96253579 Plurio Columns for use with upper sleeve PLURIO COL 3M 102MM MPL GRY 29.0 96536831 PLURIO COL 3M 102MM MGR GRY 31.6 96536832 Brackets - column mounted PLURIO BRAX1 640MM MTP D60 SIL 6.0 96253577 PLURIO BRAX2 1.2M MTP D60 SIL 10.0 96253578 Brackets - wall mounted PLURIO BRAX1 600MM MWA D60 SIL 5.0 96253576 Column Accessories FOUNDATION BOLTS 96062227 CAGE ASSEMBLY 96062228 Ø76 Ø140 3500 200 1200 225 800 MGR Ø102 2x4 M8/16 Ø102 500 3000 255 800 MGR MPL - base plate, MGR - buried 85
Legend Classic HST (ST) E27/E40 70-150W HIT-CE (MT) E27/E40 70-150W TC-TEL (FSM) GX24q-4 42W AS/NZS60598 Class I Electrical 5 Nm Impact resistant IP65 A classic shaped range of low light pollution lanterns for application in older cities, towns and historical areas Choice of post top or suspended mounting. Both offer the option of an illuminated top cap Post top version produces virtual glow effect when lit Precise light distribution ensures no direct upward light, and a consequent reduction in light pollution The Optibloc internal optic can be rotated in 45 steps to maintain uniform visual appearance and offer different distributions The high performance optics are suitable for street lighting Body: die-cast aluminium, dark grey powder coated finish, (close to RAL 9007). Flat enclosure: toughened glass. Reflector: pure aluminium. Post top: poles 76mm diameter, fixing on shaft through 3 x M8 stainless steel screws (supplied). Suspended: fixed through a 1 inch BSP threaded tube. Recommended mounting height: 4 to 5m. To specify state: Post top or suspended lantern in die-cast aluminium painted in dark grey finish, flat toughened glass, with aluminium reflector embodied in an IP65 compartment. As Thorn Legend Classic. Airlie Beach, QLD 86
URBAN LIGHTING OUTDOOR 445 530 1000 445 Windage: 0.13m 2 Windage: 0.20m 2 32m lux/1000 lm 24m 16m 8m Distance along road 0 8m 16m 24m 32m 16m 0.50 0.25 0.05 2.43 8m 0 8m 16m 24m Legend Classic post top Lamp: 150W HST DLOR: 0.57 LOR: 0.57 Mounting height: 0.80m Utilisation factors Distance/Height Road House Distance/Height Road House W 1 /H or W 2 /H side side W 1 /H or W 2 /H side side 0.2 0.04 0.04 1.5 0.35 0.15 0.4 0.09 0.07 2.0 0.38 0.16 0.6 0.15 0.10 3.0 0.40 0.16 0.8 0.22 0.12 4.0 0.40 0.16 1.0 0.27 0.14 Ordering Guide Lamp to be ordered separately. For complete fitting please order lantern and gear tray. Description Ilcos Code Socket Wt (kg) SAP Code Lantern LEGEND CLASSIC POST TOP 12.1 96009619 LEGEND CLASSIC SUSPENDED 9.9 96009621 Gear trays - Non illuminated top cap HST/HIT-CE 70W ST/MT E27 2.5 96009647 HST/HIT-CE 150W ST/MT E27 3.5 96009646 TC-TEL 42W FSM GX24Q-4 1.3 96009634 Gear trays - Illuminated top cap HST/HIT-CE 70W ST/MT E27 2.4 96009653 HST/HIT-CE 150W ST/MT E40 3.4 96009652 Accessory POST TOP ADAPTOR FOR 60MM SHAFT 0.5 96009617 87
Legend Modern HST (ST) E27/E40 70-150W HIT-CE (MT) E27/E40 70-150W TC-TEL (FSM) GX24q-4 42W AS/NZS60598 Class I Electrical 5 Nm Impact resistant IP65 A modern shaped range of low light pollution lanterns mainly dedicated to modern city centres and residential areas Choice of post top or suspended mounting Precise light distribution ensures no direct upward light, and a consequent reduction in light pollution The Optibloc internal optic can be rotated in 45 steps to maintain uniform visual appearance and offer different distributions The high performance optics are suitable for streetlighting Body: die-cast aluminium, dark grey powder coated finish, (close to RAL 9007). Flat enclosure: toughened glass. Reflector: pure aluminium. Post top mounted version on poles 76mm diameter, fixing on shaft through 3 x M8 stainless steel screws (supplied). Suspended version fixed through a 1 inch BSP threaded tube. Recommended mounting height: 4 to 5m. To specify state: Post top or suspended lantern in die-cast aluminium painted in dark grey finish, flat toughened glass, with aluminium reflector embodied in an IP65 compartment. Reflector will provide a light distribution for streetlighting, and will have an upward light output ratio of zero. As Thorn Legend Modern. FR Pascual 88
URBAN LIGHTING OUTDOOR 485 410 795 490 Windage: 0.11m 2 Windage: 0.14m 2 32m lux/1000 lm 24m 16m 8m Distance along road 0 2.27 8m 16m 24m 32m 16m 8m 0 2m 4m 0.05 0.25 0.50 Legend Modern post top Lamp: 150W HST DLOR: 0.55 LOR: 0.55 Mounting height: 0.80m Utilisation factors Distance/Height Road House Distance/Height Road House W 1 /H or W 2 /H side side W 1 /H or W 2 /H side side 0.2 0.03 0.04 1.5 0.30 0.17 0.4 0.06 0.08 2.0 0.35 0.17 0.6 0.11 0.11 3.0 0.37 0.17 0.8 0.22 0.13 4.0 0.37 0.18 1.0 0.30 0.15 Ordering Guide Lamp to be ordered separately. For complete fitting please order lantern and gear tray. Description Ilcos Code Socket Wt (kg) SAP Code Lantern LEGEND MODERN POST TOP 11.4 96009623 LEGEND MODERN SUSPENDED 9.5 96009625 Gear trays HST/HIT-CE 70W ST/MT E27 2.5 96009647 HST/HIT-CE 150W ST/MT E27 3.5 96009646 TC-TEL 42W FSM GX24Q-4 1.3 96009634 Accessory POST TOP ADAPTOR FOR 60MM SHAFT 0.5 96009617 89
EP145 HST (ST) E27/E40 70-150W AS/NZS60598 Class II Electrical 6 Nm Impact resistant IP44 - Gear compartment IP66 - Lamp compartment A range of sealed Victorian styled lanterns in antique copper or black finish Choice of post top or suspended mounting Hinged top canopy for easy control gear access and one piece bowl for improved sealing and maintenance requirements Enhanced performance with aluminium optic and horizontal lamp Lantern body: stainless steel, finished black (RAL 9005), or aged copper. Lantern top: GRP/polyester. Gasket: silicone. Gear tray: aluminium reflector optic. Bowl: clear/opal UV resistant, high impact acrylic. Hinged canopy top provides access to gear tray. Recommended mounting height 3-5m. Post-top: Choice of 60mm or 76mm spigot cap. Suspended versions fix via 3 /4 inch BSP gas pitch thread. To specify state: Post-top/suspended mounted Victorian style lantern in black/ aged copper for vertical/ horizontal lamp orientation. Integral control gear with hinged canopy. As Thorn EP145. 26ø gas pitch 767 944 420 420 Windage: 0.163m 2 90
URBAN LIGHTING Distance along road OUTDOOR 20m lux/1000 lm 15m 10m 5m X 0 5m 4.19 10m 15m 20m 10m 5m 0 5m 10m 15m House side Road side EP145 Cat. aged No. EP145 copper CVP post VMC top + EP145 mounted GTRNB 1100.T Lamp: 100W HPS-T + clear bowl DLOR: 0.54 LOR: 0.54 Lamp: 100W HST DLOR: 0.54 LOR: 0.54 Mounting height: 5.0m Mounting height: 5m 1.00 0.25 0.50 0.25 Utilisation factors Distance/Height Road House Distance/Height Road House W 1 /H or W 2 /H side side W 1 /H or W 2 /H side side 0.2 0.04 0.03 1.5 0.29 0.14 0.4 0.07 0.06 2.0 0.33 0.15 0.6 0.12 0.08 3.0 0.36 0.15 0.8 0.16 0.10 4.0 0.37 0.16 1.0 0.21 0.12 Ordering Guide Lamps to be ordered separately. For complete fitting please order lantern and gear tray. Description Ilcos Code Socket Wt (kg) Clear bowl SAP Code Opal bowl SAP Code Lanterns EP145 BLACK, POST-TOP 9.4 96002356 96002358 EP145 BLACK, SUSPENDED 13.5 96002355 96002357 EP145 AGED COPPER, POST-TOP 9.4 96006027 96006028 EP145 AGED COPPER, SUSPENDED 13.5 96006029 96006030 Gear Trays HST 70W ST E27 3.1 96002374 HST 100W ST E40 3.9 96002369 HST 150W ST E40 4.3 96006032 Accessories COLUMN MOUNTING CAP FOR Ø60MM SPIGOT 96100183 COLUMN MOUNTING CAP FOR Ø76MM SPIGOT 96227666 Burwood Park, Burwood, NSW 91
Lemnis 65 HIT-CE (MT) E27/E40 70-150W HST (ST) E40 70-150W AS/NZS60598 Class II Electrical IP65 A high performance lantern with a unique curved profile Applications from car parks to main roads Unique design allows distinctive identity to a lit area Adjustable lampholder allows various distributions Gear tray removable for easy maintenance Upper canopy: steel reinforced black GRP. Lower canopy: grey GRP. Optical systems: aluminium reflector and glass lens Cable entry via neoprene gasket in bracket. Recommended height 5-10m. To specify state: Thorn Lemnis street lantern with polyester body containing Thorn glass optical system and curved glass panel with integral control gear. IP65 rated. As Thorn Lemnis 65. 40m lux/1000 lm 30m 20m 10m 890 Distance along road 0 X 2 275 10m 0.60 Windage 0.12m 2. Ordering Guide Lamps to be ordered separately. For complete fitting please order lantern and gear tray. Description Ilcos Socket Wt SAP Code Code (kg) Lantern LEMNIS OPTICAL SYSTEM 19.0 96008431 Gear trays LEMNIS HIT-CE 70W MT E27 2.5 96038279 LEMNIS HIT-CE 150W MT E40 4.5 96038281 LEMNIS HST 150W ST E40 4.5 96038283 Product supplied less bracket, brackets available to special order 20m 30m 0.15 0.10 0.05 40m 20m 10m 0 10m 20m 30m House side Road side Cat. No. IS700S ISGTNB 1150.4 [V:1,L:0.5] Lemnis 65 Lamp: 150W HST DLOR: 0.66 LOR: 0.66 Design attitude: 0 Mounting height: 10m Utilisation factors Distance/Height Road House Distance/Height Road House W 1 /H or W 2 /H side side W 1 /H or W 2 /H side side 0.2 0.08 0.07 1.5 0.36 0.23 0.4 0.17 0.12 2.0 0.38 0.24 0.6 0.24 0.16 3.0 0.40 0.25 0.8 0.29 0.18 4.0 0.40 0.25 1.0 0.32 0.20 92
URBAN LIGHTING OUTDOOR 93
Gamma Basique HST (ST) E27 70W HSE (SE) E27 70W HIT-CE (MT) E27 70W AS/NZS60598 Class I Electrical 5 Nm Impact resistant 40 Nm Impact resistant vandal resistant version IP65 A best value post-top amenity lantern range Ideal for precincts, car parks, approach roads and pedestrian areas Choice of lamps including white light options to suit differing applications Small or large canopy options available Clear or opal reeded bowl for improved aesthetics Vandal resistant version for high risk areas - delivered fully assembled Refractor versions for asymmetric light distribution - controls/directs light and reduces light spill Miniature electronic photocell versions for automatic on/off switching Quick and easy installation with hinged gear tray Environmentally friendly - material fully recyclable 510 496 465 Windage: 0.11m 2 263 493 462 Windage: 0.099m 2 cd/1000 lm 90 90 60 50 60 100 150 30 0 30 Cat. No. QG6NB1070.4 + QG6W + QG6M Lamp: 70W HSE DLOR: 0.55 LOR: 0.73 Mounting height: 4m Hinged gear tray 94
OUTDOOR Bowl/Diffuser: injection moulded 5 Nm acrylic (vandal resistant version - polycarbonate) opal reeded or clear reeded finish (vandal resistant version - clear reeded only). Base: die-cast aluminium, dark grey powder coat textured finish, close to RAL 7010. Canopy: spun aluminium, dark grey powder coat finish with white underside. Post top mounting - 76mm diameter x 76mm long spigot. (Dedicated accessory available to allow 60mm diameter x 100 long spigot mounting). Recommended mounting height: 4 to 5 metres. Fixes to shaft with 3 x M8 stainless steel screws (supplied). Vandal proof version supplied fully assembled, complete with clear reeded bowl and small canopy. To specify state: Amenity post top lantern made with die-cast aluminium base in grey power coat, 5 Nm acrylic opal/clear reeded bowl/diffuser and canopy in spun aluminium with dark grey powder coat. As Thorn Gamma Basique. Ordering Guide Lamp to be ordered separately. For complete fitting please order base assembly with gear, bowl/diffuser and canopy. Description Ilcos Code Socket Wt (kg) SAP Code Base assemblies with gear HST/HSE/HIT-CE 70W SE/ST/MT E27 3.4 96008280 HST/HSE/HIT-CE WITH REFRACTOR 70W SE/ST/MT E27 4.1 96008583 Bowls/Diffuser GAMMA B CLEAR REEDED ACRYLIC BOWL 1.0 96008257 GAMMA B OPAL REEDED ACRYLIC BOWL 1.0 96008258 Canopies GAMMA LARGE CANOPY 1.3 96008288 GAMMA LARGE CANOPY WITH MINIATURE PHOTOCELL 1.3 96008292 GAMMA SMALL CANOPY 1.0 96008286 GAMMA SMALL CANOPY WITH MINIATURE PHOTOCELL 1.0 96008277 Vandal resistant* GAMMA B 70W HST/HSE/HIT-CE + NEMA SOCKET SE/ST/MT E27 5.2 96011999 GAMMA B 70W HST/HSE/HIT-CE SE/ST/MT E27 5.2 96012000 Accessory GAMMA B 60MM ADAPTOR 96008271 *This product is delivered fully assembled, complete with clear reeded polycarbonate bowl/diffuser and small canopy. URBAN LIGHTING 95
Glaremaster II HIT (MT) E40 150-1000W AS/NZS 60598 Class I Electrical IP55 Members of a family of high performance downward distribution environmental lanterns. Designed for general outdoor area and sports lighting Available in a range of sizes to suit lighting performance and design aesthetic requirements Suitable for pole and wall mounting Alternate reflector optics to suit a range of situations (S) street (150-400W) (F) forward throw (150-2KW) 2KW with remote gear IP55 protection rating Energy efficient design Low glare High efficiency lamp choices Spigot or body mounting Hinged glazing 120 150 Cd/1000lm 90 1125 750 375 90 60 30 New Glaremaster II Lamp: 1000W HIT LOR: 0.56 0 150 30 120 60 Ordering Guide Supplied complete with lamp. Small Version 93.5 119.0 Side elevation Bottom elevation Large Version Side elevation 600.0 770.0 324.0 416.0 235.0 300.0 End elevation End elevation Description Ilcos Code Socket Wt (kg) SAP Code Glaremaster II GLAREMASTER II SMALL 150W HIT FLOOD MT E40 13.0 96059097 GLAREMASTER II SMALL 250W HIT FLOOD MT E40 13.0 96059098 GLAREMASTER II SMALL 400W HIT FLOOD MT E40 13.0 96059099 GLAREMASTER II SMALL 1000W HIT FLOOD MT E40 16.0 96059100 GLAREMASTER II SMALL 150W HIT STREET MT E40 14.0 96059101 GLAREMASTER II SMALL 250W HIT STREET MT E40 14.0 96059102 GLAREMASTER II SMALL 400W HIT STREET MT E40 14.0 96059103 Accessories GLAREMASTER II Ø60MM SIDE ENTRY SPIGOT 96031467 GLAREMASTER II 100MM RECTANGULAR ARM 96019327 305.0 470.0 390.0 600.0 Ø 60.0 Ø 62.0 Body: formed and fabricated aluminium, powder coat black painted finish. Gear tray: galvanised steel. Lampholder: porcelain. Reflectors: aluminium. Visor: one piece toughened clear glass. Wall mounted via 2 mounting holes located at the end of the luminaire. Two additional mounting options available: Internal spigot adaptor to suit Ø 60mm spigot or 100mm long rectangular arm allows fixing on a flat vertical building or pole. To specify state: Rectangular/round outdoor light with rating equal to IP55. Robust aluminium body with integral HPF control equipment. Choice of optical assembly street/ forward throw distribution. One piece clear glass visor bottom face. As Thorn Glaremaster II. 96
Columns OUTDOOR Thorn Lighting offers a wide range of columns for road lighting, floodlighting, and amenity lighting applications. The ranges include both steel and aluminium types Aluminium columns Proof against corrosion even in harsh marine environments Maintenance free - does not need painting Paint applied for aesthetic purposes adheres securely Lightweight for easy handling and erection Reduced risk of injury in collision Recyclable at end of life Steel columns Larger range of heights available Greater weight carrying capacity Greater capacity in windage loading Possibility of additional kit to give heritage styling URBAN LIGHTING Thorn Lighting can provide a wide variety of individually designed luminaire and column packages to suit any application. For more information please contact your local Thorn Lighting branch. 97