SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA IST RELIABILITY SEVICES INC. No. 22 Puding Rd., East Dist. Hsinchu City 300, Taiwan, R.O.C. Phone: 886 3 579 5766 ext 7100 Mr. General Lee general.lee@dekra-ist.com MECHANICAL Valid To: June 30, 2019 Certificate Number: 4241.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this main laboratory listed above and the one satellite location listed below to perform the following tests on components, modules and systems for automotive, commercial, military and medical electronics fields: Test Temperature Testing 1 (-60~150) ºC Temperature Cycling 1 (-60~150) ºC Temperature Humidity Cycling 1 (-60~150) ºC (10~95) %RH IEC 60068-2-1 IEC 60068-2-2 MIL-STD-810, Method 501 and 502 JESD22-A108 MIL-STD-810, Method 503 IEC 60068-2-30 IEC 60068-2-38 IEC 60810 (A2LA Cert. No. 4241.01) 05/30/2017 Page 1 of 5
Test Humidity 1 (10~95) %RH Vibration/Bounce 1 (Sine and Random) Frequency Range: (5~2000)Hz Rating: Up to 5000kgf Mechanical Shock/Bump 1 Up to 10000G Altitude 1 Temperature: (-20~55)ºC Low Pressure: Up to 70,000ft IEC 60068-2-78 BellCore GR-78-Core IPC-TM-650 2.6.3 Series IPC-TM-650 2.6.14 Series IPC-TM-650 2.6.25 IEC 60068-2-6 IEC 60068-2-64 ISTA JESD22-B103 MIL-STD-202, Method 201, 204 and 214 MIL-STD-810, Method 514 MIL-STD-883, Method 2005 and 2007 ISO 16750-3 EN 61373 ASTM D4169 ASTM D999 IPC-TM-650 2.6.9 IEC 60068-2-27 JESD22-B110 MIL-STD-202, Method 213 MIL-STD-810, Method 516 MIL-STD-883, Method 2002 ISO 16750-3 EN 61373 IEC 60068-2-27 IEC 60068-2-13 IEC 60068-2-40 IEC 60068-2-41 MIL-STD-202, Method 105 MIL-STD-810, Method 500 (A2LA Cert. No. 4241.01) 05/30/2017 Page 2 of 5
Test Thermal Shock 1 (-65~150) ºC & (-60~180)ºC Thermal Shock Liquid to Liquid 1 (-65~150)ºC Drop 1 Corner, Edgewise, Flat Drop High: (35~150)cm; Load: 60Kg Drop High: Up to 100cm; Load: 300Kg Environmental Stress Screening 1 Temperature/ Humidity/ Vibration Frequency Range: (5~2000)Hz (Sine and random) Rating: Up to 5000kgf Temperature: (-40~150)ºC Humidity: (10~95) %RH MIL-STD-810 Method 503 IPC-TM-650 2.6.6 IPC-TM-650 2.6.7 Series JESD22-A106 IEC 60068-2-31 ISTA MIL-STD-810 Method 516 ASTM D4169 ISO 16750-3 Impact 1 IEC 60068-2-75 EN 62262 Compression 1 Power and Temperature Cycle 1 Dimensional Test 1 2D ISTA ASTM D642 ASTM D4169 IEC-60810 IPC-TM-650 2.2.2 IPC-TM-650 2.2.5 IPC-TM-650 2.2.6 IPC-TM-650 2.2.7 IPC-TM-650 2.4.22 IPC-TM-650 2.4.22.1 Visual Test 1 IPC-TM-650 2.1.1 IPC-TM-650 2.2.1 IPC-A-600 IPC-A-610 Thermal Stress Test 1 IPC-TM-650 2.4.13.1 IPC-TM-650 2.6.8 IPC-TM-650 2.6.8.1 1 Using the above methods and customer supplied test methods directly related to the capabilities listed above. 2 This accreditation covers testing performed at the main laboratory listed above, and the satellite laboratory listed below. (A2LA Cert. No. 4241.01) 05/30/2017 Page 3 of 5
DEKRA IST RELIABILITY SERVICES INC. No. 19 Puding Rd., East Dist. Hsinchu City 300, Taiwan, R.O.C. Phone: 886 3 579 5766 ext 7100 Mr. General Lee general.lee@dekra-ist.com Test Temperature Testing 1 (-60~150)ºC Temperature Cycling 1 (-60~150)ºC Temperature Humidity Cycling 1 (-60~150)ºC (10~95)%RH Humidity 1 (10~95)%RH IEC 60068-2-1 IEC 60068-2-2 MIL-STD-810, Method 501 and 502 JESD-22-A108 MIL-STD-810, Method 503 IEC 60068-2-30 IEC 60068-2-38 IEC 60810 IEC 60068-2-78 BellCore GR-78-Core IPC-TM-650 2.6.3 Series IPC-TM-650 2.6.14 Series IPC-TM-650 2.6.25 (A2LA Cert. No. 4241.01) 05/30/2017 Page 4 of 5
Test Gas Corrosion 1 Temperature: (25~40)ºC Humidity: (75~90)%RH SO2 Concentration: 10ppb~50ppm H2S Concentration: 10ppb~50ppm Cl2 Concentration: 5~200ppb NO2 Concentration: 50ppb~1.8ppm Water and Dust 1 Salt Spray 1 Solvent Concentration: 5% ph value: 6.5~7.2 Temperature: (30~50)ºC Solar Radiation 1 Temperature: (-40~80)ºC Irradiation: (700~1120)W/m2 Acoustic 1 IEC 60068-2-42 IEC 60068-2-43 IEC 60068-2-60 JIS C0097 IEC 60810 IEC 60068-2-68 La2 IEC 60529 ASTM B117 IEC 60068-2-11 IEC 60068-2-52 MIL-STD-810, Method 509 MIL-STD-202 MIL-STD-883 IEC-60068-2-5 MIL-STD-810 Method 505 Procedure II DIN 75220 ISO 3744 ISO 7779 UV 1 ASTM G154 Chemical 1 ISO 16750-5 HALT/HASS 1 Cold Temperature Steps; Hot Temperature Steps; Temperature Cycling; Random Vibration; Temperature & Vibration Combined Cycling; Temperature Measurements MTBF 1 Prediction:Telcordia SR-332; MIL-HBD- 217; Demonstration 1 Using the above methods and customer supplied test methods directly related to the capabilities listed above. (A2LA Cert. No. 4241.01) 05/30/2017 Page 5 of 5
Accredited Laboratory A2LA has accredited DEKRA IST RELIABILITY SERVICES, INC. Taiwan, R.O.C. for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 30 th day of May 2017. President and CEO For the Accreditation Council Certificate Number 4241.01 Valid to June 30, 2019 For the types of tests to which this accreditation applies, please refer to the laboratory s Mechanical Scope of Accreditation.